From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752127Ab2LQKAe (ORCPT ); Mon, 17 Dec 2012 05:00:34 -0500 Received: from mail-vc0-f174.google.com ([209.85.220.174]:59309 "EHLO mail-vc0-f174.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751968Ab2LQKAc (ORCPT ); Mon, 17 Dec 2012 05:00:32 -0500 MIME-Version: 1.0 In-Reply-To: <000001cddc2f$a2b2e8a0$e818b9e0$%han@samsung.com> References: <000001cddc2f$a2b2e8a0$e818b9e0$%han@samsung.com> Date: Mon, 17 Dec 2012 15:30:31 +0530 Message-ID: Subject: Re: PATCH] backlight: add lms501kf03 LCD driver From: Sachin Kamat To: Jingoo Han Cc: Andrew Morton , LKML , Richard Purdie Content-Type: text/plain; charset=ISO-8859-1 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Jingoo, I had already submitted a patch for adding support for this driver [1] and you had also provided your review comments on them ([2] and [3]). There were certain comments from Andrew Morton that needed to be addressed which I could not due to some other priorities. IMO, it would be better to address comments on that driver rather than posting a new (similar) driver altogether. [1] http://marc.info/?l=linux-fbdev&m=133455903202255&w=4 [2] http://marc.info/?l=linux-fbdev&m=133574414215045&w=4 [3] http://marc.info/?l=linux-fbdev&m=133576237619447&w=4 On 17 December 2012 13:52, Jingoo Han wrote: > Add the lms501kf03 LCD panel driver. The lms501kf03 LCD panel (800 > x 480) driver uses 3-wired SPI inteface. > > Signed-off-by: Ilho Lee > Signed-off-by: Jingoo Han > --- > drivers/video/backlight/Kconfig | 8 + > drivers/video/backlight/Makefile | 1 + > drivers/video/backlight/lms501kf03.c | 448 ++++++++++++++++++++++++++++++++++ > 3 files changed, 457 insertions(+), 0 deletions(-) > create mode 100644 drivers/video/backlight/lms501kf03.c > > diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig > index 765a945..081d6cf 100644 > --- a/drivers/video/backlight/Kconfig > +++ b/drivers/video/backlight/Kconfig > @@ -126,6 +126,14 @@ config LCD_AMS369FG06 > If you have an AMS369FG06 AMOLED Panel, say Y to enable its > LCD control driver. > > +config LCD_LMS501KF03 > + tristate "LMS501KF03 LCD Driver" > + depends on SPI > + default n > + help > + If you have an LMS501KF03 LCD Panel, say Y to enable its > + LCD control driver. > + > endif # LCD_CLASS_DEVICE > > # > diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile > index e7ce729..d02a728 100644 > --- a/drivers/video/backlight/Makefile > +++ b/drivers/video/backlight/Makefile > @@ -14,6 +14,7 @@ obj-$(CONFIG_LCD_TOSA) += tosa_lcd.o > obj-$(CONFIG_LCD_S6E63M0) += s6e63m0.o > obj-$(CONFIG_LCD_LD9040) += ld9040.o > obj-$(CONFIG_LCD_AMS369FG06) += ams369fg06.o > +obj-$(CONFIG_LCD_LMS501KF03) += lms501kf03.o > > obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o > obj-$(CONFIG_BACKLIGHT_ATMEL_PWM) += atmel-pwm-bl.o > diff --git a/drivers/video/backlight/lms501kf03.c b/drivers/video/backlight/lms501kf03.c > new file mode 100644 > index 0000000..c30ea53 > --- /dev/null > +++ b/drivers/video/backlight/lms501kf03.c > @@ -0,0 +1,448 @@ > +/* > + * lms501kf03 TFT LCD panel driver. > + * > + * Copyright (c) 2012 Samsung Electronics Co., Ltd. > + * Author: Jingoo Han > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License as published by the > + * Free Software Foundation; either version 2 of the License, or (at your > + * option) any later version. > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#define ENDDEF 0xff00 > +#define COMMAND_ONLY 0x00 > +#define DATA_ONLY 0x01 > + > +struct lms501kf03 { > + struct device *dev; > + struct spi_device *spi; > + unsigned int power; > + struct lcd_device *ld; > + struct lcd_platform_data *lcd_pd; > +}; > + > +static const unsigned short seq_password[] = { > + 0xb9, 0xff, 0x83, 0x69, > + ENDDEF > +}; > + > +static const unsigned short seq_power[] = { > + 0xb1, 0x01, 0x00, 0x34, 0x06, 0x00, 0x14, 0x14, 0x20, 0x28, > + 0x12, 0x12, 0x17, 0x0a, 0x01, 0xe6, 0xe6, 0xe6, 0xe6, 0xe6, > + ENDDEF > +}; > + > +static const unsigned short seq_display[] = { > + 0xb2, 0x00, 0x2b, 0x03, 0x03, 0x70, 0x00, 0xff, 0x00, 0x00, > + 0x00, 0x00, 0x03, 0x03, 0x00, 0x01, > + ENDDEF > +}; > + > +static const unsigned short seq_rgb_if[] = { > + 0xb3, 0x09, > + ENDDEF > +}; > + > +static const unsigned short seq_display_inv[] = { > + 0xb4, 0x01, 0x08, 0x77, 0x0e, 0x06, > + ENDDEF > +}; > + > +static const unsigned short seq_vcom[] = { > + 0xb6, 0x4c, 0x2e, > + ENDDEF > +}; > + > +static const unsigned short seq_gate[] = { > + 0xd5, 0x00, 0x05, 0x03, 0x29, 0x01, 0x07, 0x17, 0x68, 0x13, > + 0x37, 0x20, 0x31, 0x8a, 0x46, 0x9b, 0x57, 0x13, 0x02, 0x75, > + 0xb9, 0x64, 0xa8, 0x07, 0x0f, 0x04, 0x07, > + ENDDEF > +}; > + > +static const unsigned short seq_panel[] = { > + 0xcc, 0x02, > + ENDDEF > +}; > + > +static const unsigned short seq_col_mod[] = { > + 0x3a, 0x77, > + ENDDEF > +}; > + > +static const unsigned short seq_w_gamma[] = { > + 0xe0, 0x00, 0x04, 0x09, 0x0f, 0x1f, 0x3f, 0x1f, 0x2f, 0x0a, > + 0x0f, 0x10, 0x16, 0x18, 0x16, 0x17, 0x0d, 0x15, 0x00, 0x04, > + 0x09, 0x0f, 0x38, 0x3f, 0x20, 0x39, 0x0a, 0x0f, 0x10, 0x16, > + 0x18, 0x16, 0x17, 0x0d, 0x15, > + ENDDEF > +}; > + > +static const unsigned short seq_rgb_gamma[] = { > + 0xc1, 0x01, 0x03, 0x07, 0x0f, 0x1a, 0x22, 0x2c, 0x33, 0x3c, > + 0x46, 0x4f, 0x58, 0x60, 0x69, 0x71, 0x79, 0x82, 0x89, 0x92, > + 0x9a, 0xa1, 0xa9, 0xb1, 0xb9, 0xc1, 0xc9, 0xcf, 0xd6, 0xde, > + 0xe5, 0xec, 0xf3, 0xf9, 0xff, 0xdd, 0x39, 0x07, 0x1c, 0xcb, > + 0xab, 0x5f, 0x49, 0x80, 0x03, 0x07, 0x0f, 0x19, 0x20, 0x2a, > + 0x31, 0x39, 0x42, 0x4b, 0x53, 0x5b, 0x63, 0x6b, 0x73, 0x7b, > + 0x83, 0x8a, 0x92, 0x9b, 0xa2, 0xaa, 0xb2, 0xba, 0xc2, 0xca, > + 0xd0, 0xd8, 0xe1, 0xe8, 0xf0, 0xf8, 0xff, 0xf7, 0xd8, 0xbe, > + 0xa7, 0x39, 0x40, 0x85, 0x8c, 0xc0, 0x04, 0x07, 0x0c, 0x17, > + 0x1c, 0x23, 0x2b, 0x34, 0x3b, 0x43, 0x4c, 0x54, 0x5b, 0x63, > + 0x6a, 0x73, 0x7a, 0x82, 0x8a, 0x91, 0x98, 0xa1, 0xa8, 0xb0, > + 0xb7, 0xc1, 0xc9, 0xcf, 0xd9, 0xe3, 0xea, 0xf4, 0xff, 0x00, > + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, > + ENDDEF > +}; > + > +static const unsigned short seq_up_dn[] = { > + 0x36, 0x10, > + ENDDEF > +}; > + > +static const unsigned short seq_sleep_in[] = { > + 0x10, > + ENDDEF > +}; > + > +static const unsigned short seq_sleep_out[] = { > + 0x11, > + ENDDEF > +}; > + > +static const unsigned short seq_display_on[] = { > + 0x29, > + ENDDEF > +}; > + > +static const unsigned short seq_display_off[] = { > + 0x10, > + ENDDEF > +}; > + > +static int lms501kf03_spi_write_byte(struct lms501kf03 *lcd, int addr, int data) > +{ > + u16 buf[1]; > + struct spi_message msg; > + > + struct spi_transfer xfer = { > + .len = 2, > + .tx_buf = buf, > + }; > + > + buf[0] = (addr << 8) | data; > + > + spi_message_init(&msg); > + spi_message_add_tail(&xfer, &msg); > + > + return spi_sync(lcd->spi, &msg); > +} > + > +static int lms501kf03_spi_write(struct lms501kf03 *lcd, unsigned char address, > + unsigned char command) > +{ > + int ret; > + > + ret = lms501kf03_spi_write_byte(lcd, address, command); > + > + return ret; > +} > + > +static int lms501kf03_panel_send_sequence(struct lms501kf03 *lcd, > + const unsigned short *wbuf) > +{ > + int ret = 0, i = 0; > + > + while (wbuf[i] != ENDDEF) { > + if (i == 0) > + ret = lms501kf03_spi_write(lcd, COMMAND_ONLY, wbuf[i]); > + else > + ret = lms501kf03_spi_write(lcd, DATA_ONLY, wbuf[i]); > + if (ret) > + break; > + i += 1; > + } > + > + return ret; > +} > + > +static int lms501kf03_ldi_init(struct lms501kf03 *lcd) > +{ > + int ret, i; > + static const unsigned short *init_seq[] = { > + seq_password, > + seq_power, > + seq_display, > + seq_rgb_if, > + seq_display_inv, > + seq_vcom, > + seq_gate, > + seq_panel, > + seq_col_mod, > + seq_w_gamma, > + seq_rgb_gamma, > + seq_sleep_out, > + }; > + > + for (i = 0; i < ARRAY_SIZE(init_seq); i++) { > + ret = lms501kf03_panel_send_sequence(lcd, init_seq[i]); > + if (ret) > + break; > + } > + /* according to the datasheet, 120ms delay time is required. */ > + msleep(120); > + > + return ret; > +} > + > +static int lms501kf03_ldi_enable(struct lms501kf03 *lcd) > +{ > + return lms501kf03_panel_send_sequence(lcd, seq_display_on); > +} > + > +static int lms501kf03_ldi_disable(struct lms501kf03 *lcd) > +{ > + return lms501kf03_panel_send_sequence(lcd, seq_display_off); > +} > + > +static int lms501kf03_power_is_on(int power) > +{ > + return (power) <= FB_BLANK_NORMAL; > +} > + > +static int lms501kf03_power_on(struct lms501kf03 *lcd) > +{ > + int ret = 0; > + struct lcd_platform_data *pd; > + > + pd = lcd->lcd_pd; > + > + if (!pd->power_on) { > + dev_err(lcd->dev, "power_on is NULL.\n"); > + return -EFAULT; > + } else { > + pd->power_on(lcd->ld, 1); > + msleep(pd->power_on_delay); > + } > + > + if (!pd->reset) { > + dev_err(lcd->dev, "reset is NULL.\n"); > + return -EFAULT; > + } else { > + pd->reset(lcd->ld); > + msleep(pd->reset_delay); > + } > + > + ret = lms501kf03_ldi_init(lcd); > + if (ret) { > + dev_err(lcd->dev, "failed to initialize ldi.\n"); > + return ret; > + } > + > + ret = lms501kf03_ldi_enable(lcd); > + if (ret) { > + dev_err(lcd->dev, "failed to enable ldi.\n"); > + return ret; > + } > + > + return 0; > +} > + > +static int lms501kf03_power_off(struct lms501kf03 *lcd) > +{ > + int ret = 0; > + struct lcd_platform_data *pd; > + > + pd = lcd->lcd_pd; > + > + ret = lms501kf03_ldi_disable(lcd); > + if (ret) { > + dev_err(lcd->dev, "lcd setting failed.\n"); > + return -EIO; > + } > + > + msleep(pd->power_off_delay); > + > + pd->power_on(lcd->ld, 0); > + > + return 0; > +} > + > +static int lms501kf03_power(struct lms501kf03 *lcd, int power) > +{ > + int ret = 0; > + > + if (lms501kf03_power_is_on(power) && > + !lms501kf03_power_is_on(lcd->power)) > + ret = lms501kf03_power_on(lcd); > + else if (!lms501kf03_power_is_on(power) && > + lms501kf03_power_is_on(lcd->power)) > + ret = lms501kf03_power_off(lcd); > + > + if (!ret) > + lcd->power = power; > + > + return ret; > +} > + > +static int lms501kf03_get_power(struct lcd_device *ld) > +{ > + struct lms501kf03 *lcd = lcd_get_data(ld); > + > + return lcd->power; > +} > + > +static int lms501kf03_set_power(struct lcd_device *ld, int power) > +{ > + struct lms501kf03 *lcd = lcd_get_data(ld); > + > + if (power != FB_BLANK_UNBLANK && power != FB_BLANK_POWERDOWN && > + power != FB_BLANK_NORMAL) { > + dev_err(lcd->dev, "power value should be 0, 1 or 4.\n"); > + return -EINVAL; > + } > + > + return lms501kf03_power(lcd, power); > +} > + > +static struct lcd_ops lms501kf03_lcd_ops = { > + .get_power = lms501kf03_get_power, > + .set_power = lms501kf03_set_power, > +}; > + > +static int lms501kf03_probe(struct spi_device *spi) > +{ > + struct lms501kf03 *lcd = NULL; > + struct lcd_device *ld = NULL; > + int ret = 0; > + > + lcd = devm_kzalloc(&spi->dev, sizeof(struct lms501kf03), GFP_KERNEL); > + if (!lcd) > + return -ENOMEM; > + > + /* lms501kf03 lcd panel uses 3-wire 9-bit SPI Mode. */ > + spi->bits_per_word = 9; > + > + ret = spi_setup(spi); > + if (ret < 0) { > + dev_err(&spi->dev, "spi setup failed.\n"); > + return ret; > + } > + > + lcd->spi = spi; > + lcd->dev = &spi->dev; > + > + lcd->lcd_pd = spi->dev.platform_data; > + if (!lcd->lcd_pd) { > + dev_err(&spi->dev, "platform data is NULL\n"); > + return -EFAULT; > + } > + > + ld = lcd_device_register("lms501kf03", &spi->dev, lcd, > + &lms501kf03_lcd_ops); > + if (IS_ERR(ld)) > + return PTR_ERR(ld); > + > + lcd->ld = ld; > + > + if (!lcd->lcd_pd->lcd_enabled) { > + /* > + * if lcd panel was off from bootloader then > + * current lcd status is powerdown and then > + * it enables lcd panel. > + */ > + lcd->power = FB_BLANK_POWERDOWN; > + > + lms501kf03_power(lcd, FB_BLANK_UNBLANK); > + } else { > + lcd->power = FB_BLANK_UNBLANK; > + } > + > + dev_set_drvdata(&spi->dev, lcd); > + > + dev_info(&spi->dev, "lms501kf03 panel driver has been probed.\n"); > + > + return 0; > +} > + > +static int lms501kf03_remove(struct spi_device *spi) > +{ > + struct lms501kf03 *lcd = dev_get_drvdata(&spi->dev); > + > + lms501kf03_power(lcd, FB_BLANK_POWERDOWN); > + lcd_device_unregister(lcd->ld); > + > + return 0; > +} > + > +#if defined(CONFIG_PM) > +static unsigned int before_power; > + > +static int lms501kf03_suspend(struct spi_device *spi, pm_message_t mesg) > +{ > + int ret = 0; > + struct lms501kf03 *lcd = dev_get_drvdata(&spi->dev); > + > + dev_dbg(&spi->dev, "lcd->power = %d\n", lcd->power); > + > + before_power = lcd->power; > + > + /* > + * when lcd panel is suspend, lcd panel becomes off > + * regardless of status. > + */ > + ret = lms501kf03_power(lcd, FB_BLANK_POWERDOWN); > + > + return ret; > +} > + > +static int lms501kf03_resume(struct spi_device *spi) > +{ > + int ret = 0; > + struct lms501kf03 *lcd = dev_get_drvdata(&spi->dev); > + > + lcd->power = FB_BLANK_POWERDOWN; > + > + ret = lms501kf03_power(lcd, FB_BLANK_UNBLANK); > + > + return ret; > +} > +#else > +#define lms501kf03_suspend NULL > +#define lms501kf03_resume NULL > +#endif > + > +void lms501kf03_shutdown(struct spi_device *spi) > +{ > + struct lms501kf03 *lcd = dev_get_drvdata(&spi->dev); > + > + lms501kf03_power(lcd, FB_BLANK_POWERDOWN); > +} > + > +static struct spi_driver lms501kf03_driver = { > + .driver = { > + .name = "lms501kf03", > + .owner = THIS_MODULE, > + }, > + .probe = lms501kf03_probe, > + .remove = lms501kf03_remove, > + .shutdown = lms501kf03_shutdown, > + .suspend = lms501kf03_suspend, > + .resume = lms501kf03_resume, > +}; > + > +module_spi_driver(lms501kf03_driver); > + > +MODULE_AUTHOR("Jingoo Han "); > +MODULE_DESCRIPTION("lms501kf03 LCD Driver"); > +MODULE_LICENSE("GPL"); > -- > 1.7.2.5 > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ -- With warm regards, Sachin