From: Avi Fishman <avifishman70@gmail.com>
To: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Tomer Maimon <tmaimon77@gmail.com>,
Tali Perry <tali.perry1@gmail.com>,
Patrick Venture <venture@google.com>,
Nancy Yuen <yuenn@google.com>,
Benjamin Fair <benjaminfair@google.com>,
Thomas Gleixner <tglx@linutronix.de>,
OpenBMC Maillist <openbmc@lists.ozlabs.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] [v5] clocksource/drivers/npcm: fix GENMASK and timer operation
Date: Wed, 21 Aug 2019 13:42:27 +0300 [thread overview]
Message-ID: <CAKKbWA72VX4LnLM0on2=bj787J53GUwkh6PTU2+0fvP+gPu+Xg@mail.gmail.com> (raw)
In-Reply-To: <744188a1-d11a-7edc-79cd-e3c7dbcf6e86@linaro.org>
Thanks Daniel,
It seems more clear now :)
Good to know about the need for Fixes tag.
On Wed, Aug 21, 2019 at 1:11 PM Daniel Lezcano
<daniel.lezcano@linaro.org> wrote:
>
> On 29/07/2019 19:03, Avi Fishman wrote:
> > NPCM7XX_Tx_OPER GENMASK bits where wrong,
> > Since NPCM7XX_REG_TICR0 register reset value of those bits was 0,
> > it did not cause an issue.
> > in npcm7xx_timer_oneshot() the original NPCM7XX_REG_TCSR0 register was
> > read again after masking it with ~NPCM7XX_Tx_OPER so the masking didn't
> > take effect.
> >
> > npcm7xx_timer_periodic() was not wrong but it wrote to NPCM7XX_REG_TICR0
> > in a middle of read modify write to NPCM7XX_REG_TCSR0 which is
> > confusing.
> > npcm7xx_timer_oneshot() did wrong calculation
> >
> > Signed-off-by: Avi Fishman <avifishman70@gmail.com>
>
> I've applied the patch and massaged the changelog [1].
>
> Let me know if you disagree with it.
>
> Please, in the future take care of adding the Fixes tag.
>
> Thanks
>
> -- Daniel
>
> [1]
> https://git.linaro.org/people/daniel.lezcano/linux.git/commit/?h=clockevents/next&id=a5f6679fc81e42fcbef0184770d8a3b04c0f153e
>
> > ---
> > drivers/clocksource/timer-npcm7xx.c | 9 +++------
> > 1 file changed, 3 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/clocksource/timer-npcm7xx.c b/drivers/clocksource/timer-npcm7xx.c
> > index 8a30da7f083b..9780ffd8010e 100644
> > --- a/drivers/clocksource/timer-npcm7xx.c
> > +++ b/drivers/clocksource/timer-npcm7xx.c
> > @@ -32,7 +32,7 @@
> > #define NPCM7XX_Tx_INTEN BIT(29)
> > #define NPCM7XX_Tx_COUNTEN BIT(30)
> > #define NPCM7XX_Tx_ONESHOT 0x0
> > -#define NPCM7XX_Tx_OPER GENMASK(27, 3)
> > +#define NPCM7XX_Tx_OPER GENMASK(28, 27)
> > #define NPCM7XX_Tx_MIN_PRESCALE 0x1
> > #define NPCM7XX_Tx_TDR_MASK_BITS 24
> > #define NPCM7XX_Tx_MAX_CNT 0xFFFFFF
> > @@ -84,8 +84,6 @@ static int npcm7xx_timer_oneshot(struct clock_event_device *evt)
> >
> > val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0);
> > val &= ~NPCM7XX_Tx_OPER;
> > -
> > - val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0);
> > val |= NPCM7XX_START_ONESHOT_Tx;
> > writel(val, timer_of_base(to) + NPCM7XX_REG_TCSR0);
> >
> > @@ -97,12 +95,11 @@ static int npcm7xx_timer_periodic(struct clock_event_device *evt)
> > struct timer_of *to = to_timer_of(evt);
> > u32 val;
> >
> > + writel(timer_of_period(to), timer_of_base(to) + NPCM7XX_REG_TICR0);
> > +
> > val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0);
> > val &= ~NPCM7XX_Tx_OPER;
> > -
> > - writel(timer_of_period(to), timer_of_base(to) + NPCM7XX_REG_TICR0);
> > val |= NPCM7XX_START_PERIODIC_Tx;
> > -
> > writel(val, timer_of_base(to) + NPCM7XX_REG_TCSR0);
> >
> > return 0;
> >
>
>
> --
> <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
>
> Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
> <http://twitter.com/#!/linaroorg> Twitter |
> <http://www.linaro.org/linaro-blog/> Blog
>
--
Regards,
Avi
prev parent reply other threads:[~2019-08-21 10:44 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-29 17:03 [PATCH] [v5] clocksource/drivers/npcm: fix GENMASK and timer operation Avi Fishman
2019-08-21 10:11 ` Daniel Lezcano
2019-08-21 10:42 ` Avi Fishman [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAKKbWA72VX4LnLM0on2=bj787J53GUwkh6PTU2+0fvP+gPu+Xg@mail.gmail.com' \
--to=avifishman70@gmail.com \
--cc=benjaminfair@google.com \
--cc=daniel.lezcano@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=openbmc@lists.ozlabs.org \
--cc=tali.perry1@gmail.com \
--cc=tglx@linutronix.de \
--cc=tmaimon77@gmail.com \
--cc=venture@google.com \
--cc=yuenn@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).