linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alistair Francis <alistair23@gmail.com>
To: Lee Jones <lee.jones@linaro.org>
Cc: Alistair Francis <alistair@alistair23.me>,
	Rob Herring <robh+dt@kernel.org>,
	lgirdwood@gmail.com, Mark Brown <broonie@kernel.org>,
	dl-linux-imx <linux-imx@nxp.com>,
	Sascha Hauer <kernel@pengutronix.de>,
	devicetree <devicetree@vger.kernel.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v6 2/5] mfd: sy7636a: Initial commit
Date: Thu, 17 Jun 2021 08:01:49 +1000	[thread overview]
Message-ID: <CAKmqyKNs+Ebvd5MwtoKfKhNrMJVhTsBLjDhLXRuK8C+gs5MCcQ@mail.gmail.com> (raw)
In-Reply-To: <YMnY7RLW6ml4Tq0g@dell>

On Wed, Jun 16, 2021 at 8:56 PM Lee Jones <lee.jones@linaro.org> wrote:
>
> On Tue, 15 Jun 2021, Alistair Francis wrote:
>
> > Initial support for the Silergy SY7636A Power Management chip.
> >
> > Signed-off-by: Alistair Francis <alistair@alistair23.me>
> > ---
> >  drivers/mfd/Kconfig         |  9 ++++
> >  drivers/mfd/Makefile        |  1 +
> >  drivers/mfd/sy7636a.c       | 82 +++++++++++++++++++++++++++++++++++++
> >  include/linux/mfd/sy7636a.h | 47 +++++++++++++++++++++
> >  4 files changed, 139 insertions(+)
> >  create mode 100644 drivers/mfd/sy7636a.c
> >  create mode 100644 include/linux/mfd/sy7636a.h
> >
> > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> > index 5c7f2b100191..7d6cf32b1549 100644
> > --- a/drivers/mfd/Kconfig
> > +++ b/drivers/mfd/Kconfig
> > @@ -1339,6 +1339,15 @@ config MFD_SYSCON
> >         Select this option to enable accessing system control registers
> >         via regmap.
> >
> > +config MFD_SY7636A
> > +     tristate "Silergy SY7636A Power Management chip"
> > +     select MFD_CORE
> > +     select REGMAP_I2C
> > +     depends on I2C
> > +     help
> > +       Select this option to enable support for the Silergy SY7636A
> > +       Power Management chip.
> > +
> >  config MFD_DAVINCI_VOICECODEC
> >       tristate
> >       select MFD_CORE
> > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> > index 4f6d2b8a5f76..f95e1e725a95 100644
> > --- a/drivers/mfd/Makefile
> > +++ b/drivers/mfd/Makefile
> > @@ -265,6 +265,7 @@ obj-$(CONFIG_MFD_STMFX)   += stmfx.o
> >  obj-$(CONFIG_MFD_KHADAS_MCU)         += khadas-mcu.o
> >  obj-$(CONFIG_MFD_ACER_A500_EC)       += acer-ec-a500.o
> >
> > +obj-$(CONFIG_MFD_SY7636A)    += sy7636a.o
> >  obj-$(CONFIG_SGI_MFD_IOC3)   += ioc3.o
> >  obj-$(CONFIG_MFD_SIMPLE_MFD_I2C)     += simple-mfd-i2c.o
> >  obj-$(CONFIG_MFD_INTEL_M10_BMC)   += intel-m10-bmc.o
> > diff --git a/drivers/mfd/sy7636a.c b/drivers/mfd/sy7636a.c
> > new file mode 100644
> > index 000000000000..e08f29ea63f8
> > --- /dev/null
> > +++ b/drivers/mfd/sy7636a.c
> > @@ -0,0 +1,82 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +//
>
> Only the SPDX with C++ style comments please.
>
> > +// MFD parent driver for SY7636A chip
>
> Drop the MFD part.  It's a Linuxisum that doesn't really exist.
>
> > +// Copyright (C) 2021 reMarkable AS - http://www.remarkable.com/
> > +//
> > +// Authors: Lars Ivar Miljeteig <lars.ivar.miljeteig@remarkable.com>
> > +//          Alistair Francis <alistair@alistair23.me>
> > +//
> > +// Based on the lp87565 driver by Keerthy <j-keerthy@ti.com>
> > +
> > +#include <linux/interrupt.h>
> > +#include <linux/mfd/core.h>
> > +#include <linux/module.h>
> > +#include <linux/of_device.h>
> > +
> > +#include <linux/mfd/sy7636a.h>
> > +
> > +static const struct regmap_config sy7636a_regmap_config = {
> > +     .reg_bits = 8,
> > +     .val_bits = 8,
> > +};
> > +
> > +static const struct mfd_cell sy7636a_cells[] = {
> > +     { .name = "sy7636a-regulator", },
> > +     { .name = "sy7636a-temperature", },
> > +     { .name = "sy7636a-thermal", },
> > +};
> > +
> > +static const struct of_device_id of_sy7636a_match_table[] = {
> > +     { .compatible = "silergy,sy7636a", },
> > +     {}
> > +};
> > +MODULE_DEVICE_TABLE(of, of_sy7636a_match_table);
>
> Hold on.  This driver doesn't really do anything.  If you create OF
> nodes for all the sub-devices, you can use simple-mfd-i2c.
>
> Any reason you can't do that?

Just to confirm, you mean something like this?

diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts
b/arch/arm/boot/dts/imx7d-remarkable2.dts
index 9327d1c06c96..3577104b3853 100644
--- a/arch/arm/boot/dts/imx7d-remarkable2.dts
+++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
@@ -382,6 +382,21 @@ epd_pmic: sy7636a@62 {
                pinctrl-0 = <&pinctrl_epdpmic>;
                #thermal-sensor-cells = <0>;

+               regulator@0 {
+                       compatible = "sy7636a-regulator";
+                       reg = <0>;
+               };
+
+               temperature@0 {
+                       compatible = "sy7636a-temperature";
+                       reg = <0>;
+               };
+
+               thermal@0 {
+                       compatible = "sy7636a-thermal";
+                       reg = <0>;
+               };
+
                regulators {
                        compatible = "silergy,sy7636a-regulator";
diff --git a/drivers/mfd/simple-mfd-i2c.c b/drivers/mfd/simple-mfd-i2c.c
index 87f684cff9a1..622a05318cff 100644
--- a/drivers/mfd/simple-mfd-i2c.c
+++ b/drivers/mfd/simple-mfd-i2c.c
@@ -39,6 +39,7 @@ static int simple_mfd_i2c_probe(struct i2c_client *i2c)

 static const struct of_device_id simple_mfd_i2c_of_match[] = {
        { .compatible = "kontron,sl28cpld" },
+       { .compatible = "silergy,sy7636a" },
        {}
 };
 MODULE_DEVICE_TABLE(of, simple_mfd_i2c_of_match);

Alistair

>
> --
> Lee Jones [李琼斯]
> Senior Technical Lead - Developer Services
> Linaro.org │ Open source software for Arm SoCs
> Follow Linaro: Facebook | Twitter | Blog

  reply	other threads:[~2021-06-16 22:02 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-15 10:33 [PATCH v6 1/5] dt-bindings: mfd: Initial commit of silergy,sy7636a.yaml Alistair Francis
2021-06-15 10:33 ` [PATCH v6 2/5] mfd: sy7636a: Initial commit Alistair Francis
2021-06-16 10:56   ` Lee Jones
2021-06-16 22:01     ` Alistair Francis [this message]
2021-06-17  9:20       ` Lee Jones
2021-07-08 11:16         ` Alistair Francis
2021-07-08 12:47           ` Lee Jones
2021-07-28  6:57             ` Alistair Francis
2021-08-02  8:45               ` Lee Jones
2021-06-15 10:33 ` [PATCH v6 3/5] regulator: " Alistair Francis
2021-06-15 10:33 ` [PATCH v6 4/5] ARM: imx_v6_v7_defconfig: Enable silergy,sy7636a Alistair Francis
2021-06-15 10:34 ` [PATCH v6 5/5] ARM: dts: imx7d: remarkable2: " Alistair Francis
2021-06-15 17:29 ` (subset) [PATCH v6 1/5] dt-bindings: mfd: Initial commit of silergy,sy7636a.yaml Mark Brown
2021-06-24 20:56 ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAKmqyKNs+Ebvd5MwtoKfKhNrMJVhTsBLjDhLXRuK8C+gs5MCcQ@mail.gmail.com \
    --to=alistair23@gmail.com \
    --cc=alistair@alistair23.me \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@pengutronix.de \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --subject='Re: [PATCH v6 2/5] mfd: sy7636a: Initial commit' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).