From: Shuah Khan <shuahkhan@gmail.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-kernel@vger.kernel.org, torvalds@linux-foundation.org,
akpm@linux-foundation.org, stable@vger.kernel.org
Subject: Re: [ 00/34] 3.7.7-stable review
Date: Fri, 8 Feb 2013 13:29:23 -0700 [thread overview]
Message-ID: <CAKocOONvYJRG9+Az2SdohcTMLqyf3sqMLcaRpxn19wNYfLQv5Q@mail.gmail.com> (raw)
In-Reply-To: <20130208004627.375461662@linuxfoundation.org>
On Thu, Feb 7, 2013 at 5:56 PM, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
> This is the start of the stable review cycle for the 3.7.7 release.
> There are 34 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Feb 10 00:43:13 UTC 2013.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.7.7-rc1.gz
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Patches applied cleanly to 3.0.62, 3.4.29, and 3.7.6.
Compiled and booted on the following systems:
HP EliteBook 6930p Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz
HP ProBook 6475b AMD A10-4600M APU with Radeon(tm) HD Graphics
Cross-compile tests:
alpha: defconfig passed on all
arm: defconfig passed on all
arm64: not applicable to 3.0.y, 3.4.y. defconfig passed on 3.7.y
c6x: not applicable to 3.0.y, defconfig passed on 3.4.y, and 3.7.y.
mips: defconfig passed on all
mipsel: defconfig passed on all
powerpc: wii_defconfig passed on all
sh: defconfig passed on all
sparc: defconfig passed on all
tile: tilegx_defconfig passed on all
-- Shuah
next prev parent reply other threads:[~2013-02-08 20:29 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-08 0:56 [ 00/34] 3.7.7-stable review Greg Kroah-Hartman
2013-02-08 0:56 ` [ 01/34] powerpc/mm: Fix hash computation function Greg Kroah-Hartman
2013-02-08 0:56 ` [ 02/34] digsig: Fix memory leakage in digsig_verify_rsa() Greg Kroah-Hartman
2013-02-08 0:56 ` [ 03/34] drm/radeon/evergreen+: wait for the MC to settle after MC blackout Greg Kroah-Hartman
2013-02-08 0:57 ` [ 04/34] drm/radeon: add WAIT_UNTIL to the non-VM safe regs list for cayman/TN Greg Kroah-Hartman
2013-02-08 0:57 ` [ 05/34] drm/radeon: add quirk for RV100 board Greg Kroah-Hartman
2013-02-08 0:57 ` [ 06/34] drm/radeon: fix MC blackout on evergreen+ Greg Kroah-Hartman
2013-02-08 0:57 ` [ 07/34] drm/radeon: fix backend map setup on 1 RB sumo boards Greg Kroah-Hartman
2013-02-08 0:57 ` [ 08/34] drm/radeon: protect against div by 0 in backend setup Greg Kroah-Hartman
2013-02-08 0:57 ` [ 09/34] drm/radeon: prevent crash in the ring space allocation Greg Kroah-Hartman
2013-02-08 0:57 ` [ 10/34] drm/radeon: Calling object_unrefer() when creating fb failure Greg Kroah-Hartman
2013-02-08 0:57 ` [ 11/34] x86-64: Replace left over sti/cli in ia32 audit exit code Greg Kroah-Hartman
2013-02-08 0:57 ` [ 12/34] sched/rt: Use root_domain of rt_rq not current processor Greg Kroah-Hartman
2013-02-08 0:57 ` [ 13/34] mtd: davinci_nand: fix modular build with CONFIG_OF=y Greg Kroah-Hartman
2013-02-08 0:57 ` [ 14/34] nilfs2: fix fix very long mount time issue Greg Kroah-Hartman
2013-02-08 0:57 ` [ 15/34] mm/hugetlb: set PTE as huge in hugetlb_change_protection and remove_migration_pte Greg Kroah-Hartman
2013-02-08 0:57 ` [ 16/34] drivers/rtc/rtc-isl1208.c: call rtc_update_irq() from the alarm irq handler Greg Kroah-Hartman
2013-02-08 0:57 ` [ 17/34] drivers/rtc/rtc-pl031.c: fix the missing operation on enable Greg Kroah-Hartman
2013-02-08 0:57 ` [ 18/34] USB: ftdi_sio: add Zolix FTDI PID Greg Kroah-Hartman
2013-02-08 0:57 ` [ 19/34] USB: ftdi_sio: add PID/VID entries for ELV WS 300 PC II Greg Kroah-Hartman
2013-02-08 0:57 ` [ 20/34] USB: option: add support for Telit LE920 Greg Kroah-Hartman
2013-02-08 0:57 ` [ 21/34] USB: option: add Changhong CH690 Greg Kroah-Hartman
2013-02-08 0:57 ` [ 22/34] USB: qcserial: add Telit Gobi QDL device Greg Kroah-Hartman
2013-02-08 0:57 ` [ 23/34] USB: EHCI: remove ASS/PSS polling timeout Greg Kroah-Hartman
2013-02-08 0:57 ` [ 24/34] USB: EHCI: unlink one async QH at a time Greg Kroah-Hartman
2013-02-08 0:57 ` [ 25/34] USB: EHCI: fix timer bug affecting port resume Greg Kroah-Hartman
2013-02-08 0:57 ` [ 26/34] USB: EHCI: fix bug in scheduling periodic split transfers Greg Kroah-Hartman
2013-02-08 0:57 ` [ 27/34] usb: Using correct way to clear usb3.0 devices remote wakeup feature Greg Kroah-Hartman
2013-02-08 0:57 ` [ 28/34] USB: storage: Define a new macro for USB storage match rules Greg Kroah-Hartman
2013-02-08 0:57 ` [ 29/34] USB: storage: optimize to match the Huawei USB storage devices and support new switch command Greg Kroah-Hartman
2013-02-08 0:57 ` [ 30/34] drivers: xhci: fix incorrect bit test Greg Kroah-Hartman
2013-02-08 0:57 ` [ 31/34] xhci: Fix isoc TD encoding Greg Kroah-Hartman
2013-02-08 0:57 ` [ 32/34] xhci: Fix TD size for isochronous URBs Greg Kroah-Hartman
2013-02-08 0:57 ` [ 33/34] USB: XHCI: fix memory leak of URB-private data Greg Kroah-Hartman
2013-02-08 0:57 ` [ 34/34] usb: Prevent dead ports when xhci is not enabled Greg Kroah-Hartman
2013-02-08 20:29 ` Shuah Khan [this message]
2013-02-09 12:06 ` [ 00/34] 3.7.7-stable review Satoru Takeuchi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAKocOONvYJRG9+Az2SdohcTMLqyf3sqMLcaRpxn19wNYfLQv5Q@mail.gmail.com \
--to=shuahkhan@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).