linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ard Biesheuvel <ardb@kernel.org>
To: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: linux-efi <linux-efi@vger.kernel.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 1/1] efi/libstub: describe memory functions
Date: Mon, 17 Feb 2020 22:25:46 +0100	[thread overview]
Message-ID: <CAKv+Gu9fxdag7Fmevd0Nxhwt-qNYcCg0YaBoq0LzsjyOu2z0mQ@mail.gmail.com> (raw)
In-Reply-To: <20200217211323.4878-1-xypron.glpk@gmx.de>

On Mon, 17 Feb 2020 at 22:14, Heinrich Schuchardt <xypron.glpk@gmx.de> wrote:
>
> Provide descriptions of:
>
> * efi_get_memory_map()
> * efi_low_alloc_above()
> * efi_free()
>
> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

Thanks Heinrich. One comment below.

> ---
>  drivers/firmware/efi/libstub/mem.c | 31 ++++++++++++++++++++++++++++--
>  1 file changed, 29 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/firmware/efi/libstub/mem.c b/drivers/firmware/efi/libstub/mem.c
> index c25fd9174b74..be24c062115f 100644
> --- a/drivers/firmware/efi/libstub/mem.c
> +++ b/drivers/firmware/efi/libstub/mem.c
> @@ -16,6 +16,15 @@ static inline bool mmap_has_headroom(unsigned long buff_size,
>         return slack / desc_size >= EFI_MMAP_NR_SLACK_SLOTS;
>  }
>
> +/**
> + * efi_get_memory_map() - get memory map
> + * @map                on return pointer to memory map
> + *
> + * Retrieve the UEFI memory map. The allocated memory leaves room for
> + * up to EFI_MMAP_NR_SLACK_SLOTS additional memory map entries.
> + *
> + * Return:     status code
> + */
>  efi_status_t efi_get_memory_map(struct efi_boot_memmap *map)
>  {
>         efi_memory_desc_t *m = NULL;
> @@ -109,8 +118,20 @@ efi_status_t efi_allocate_pages(unsigned long size, unsigned long *addr,
>         }
>         return EFI_SUCCESS;
>  }
> -/*
> - * Allocate at the lowest possible address that is not below 'min'.
> +/**
> + * efi_low_alloc_above() - allocate pages at or above given address
> + * @size:      size of the memory area to allocate
> + * @align:     minimum alignment of the allocated memory area. It should
> + *             a power of two.
> + * @addr:      on exit the address of the allocated memory
> + * @min:       minimum address to used for the memory allocation
> + *
> + * Allocate at the lowest possible address that is not below 'min' as
> + * EFI_LOADER_DATA. The allocated pages are aligned according to 'align' but at
> + * least EFI_ALLOC_ALIGN. The first allocated page will not below the address
> + * given by 'min'.
> + *
> + * Return:     status code
>   */
>  efi_status_t efi_low_alloc_above(unsigned long size, unsigned long align,
>                                  unsigned long *addr, unsigned long min)
> @@ -187,6 +208,12 @@ efi_status_t efi_low_alloc_above(unsigned long size, unsigned long align,
>         return status;
>  }
>
> +/**
> + * efi_free() - free memory pages
> + * @size       size of the memory area to free in bytes
> + * @addr       start of the memory area to free (must be EFI_PAGE_SIZE
> + *             aligned)
> + */

It may be good to mention here that the allocation is rounded up to
EFI_ALLOC_ALIGN again, so it should only be used for allocation that
were made using efi_allocate_pages() or efi_low_alloc_above().


>  void efi_free(unsigned long size, unsigned long addr)
>  {
>         unsigned long nr_pages;
> --
> 2.25.0
>

      reply	other threads:[~2020-02-17 21:26 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-17 21:13 [PATCH 1/1] efi/libstub: describe memory functions Heinrich Schuchardt
2020-02-17 21:25 ` Ard Biesheuvel [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAKv+Gu9fxdag7Fmevd0Nxhwt-qNYcCg0YaBoq0LzsjyOu2z0mQ@mail.gmail.com \
    --to=ardb@kernel.org \
    --cc=linux-efi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=xypron.glpk@gmx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).