[PATCH v2 0/3] efi: add support for non-standard capsule headers

[PATCH v2 0/3] efi: add support for non-standard capsule headers

[Jan Kiszka]

This picks up the patches Ard send before in [1], including the
"left-over" patches 6..8.

As Ard suggested, I've taken updated patches 6 and 7 of him from [2]
which address reviewer comments. Furthermore, I've changed patch 8 to
factor out the Quark quirk logic from the overloaded
efi_capsule_setup_info as requested by Matt and also applied Andy's
suggestion to have a quirk dispatcher table with callbacks.

Tested successfully on the IOT2040 - still without a working Galileo
board.

Jan

[1] http://www.spinics.net/lists/linux-efi/msg11194.html
[2] https://git.kernel.org/pub/scm/linux/kernel/git/ardb/linux.git/log/?h=quark-capsule

Cc: Matt Fleming <matt@codeblueprint.co.uk>

Ard Biesheuvel (2):
  efi/capsule-loader: Redirect calls to efi_capsule_setup_info via weak
    alias
  efi/capsule-loader: Use page addresses rather than struct page
    pointers

Jan Kiszka (1):
  efi/capsule: Add support for Quark security header

 arch/x86/platform/efi/quirks.c        | 137 ++++++++++++++++++++++++++++++++++
 drivers/firmware/efi/Kconfig          |   9 +++
 drivers/firmware/efi/capsule-loader.c |  66 ++++++++--------
 drivers/firmware/efi/capsule.c        |   7 +-
 include/linux/efi.h                   |  14 +++-
 5 files changed, 197 insertions(+), 36 deletions(-)

-- 
2.12.0

[PATCH v2 1/3] efi/capsule-loader: Redirect calls to efi_capsule_setup_info via weak alias

[Jan Kiszka]

From: Ard Biesheuvel <ard.biesheuvel@linaro.org>

To allow platform specific code to hook into the capsule loading
routines, indirect calls to efi_capsule_setup_info() via a weak alias
of __efi_capsule_setup_info(), allowing platforms to redefine the former
but still use the latter.

Cc: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
 drivers/firmware/efi/capsule-loader.c | 56 +++++++++++++++++------------------
 include/linux/efi.h                   | 12 ++++++++
 2 files changed, 39 insertions(+), 29 deletions(-)

diff --git a/drivers/firmware/efi/capsule-loader.c b/drivers/firmware/efi/capsule-loader.c
index 5b012a467d7d..f7fdeab0bc37 100644
--- a/drivers/firmware/efi/capsule-loader.c
+++ b/drivers/firmware/efi/capsule-loader.c
@@ -20,16 +20,6 @@
 
 #define NO_FURTHER_WRITE_ACTION -1
 
-struct capsule_info {
-	efi_capsule_header_t	header;
-	int			reset_type;
-	long			index;
-	size_t			count;
-	size_t			total_size;
-	struct page		**pages;
-	size_t			page_bytes_remain;
-};
-
 /**
  * efi_free_all_buff_pages - free all previous allocated buffer pages
  * @cap_info: pointer to current instance of capsule_info structure
@@ -46,28 +36,13 @@ static void efi_free_all_buff_pages(struct capsule_info *cap_info)
 	cap_info->index = NO_FURTHER_WRITE_ACTION;
 }
 
-/**
- * efi_capsule_setup_info - obtain the efi capsule header in the binary and
- *			    setup capsule_info structure
- * @cap_info: pointer to current instance of capsule_info structure
- * @kbuff: a mapped first page buffer pointer
- * @hdr_bytes: the total received number of bytes for efi header
- **/
-static int efi_capsule_setup_info(struct capsule_info *cap_info,
-				  void *kbuff, size_t hdr_bytes)
+int __efi_capsule_setup_info(struct capsule_info *cap_info)
 {
 	size_t pages_needed;
 	int ret;
 	void *temp_page;
 
-	/* Only process data block that is larger than efi header size */
-	if (hdr_bytes < sizeof(efi_capsule_header_t))
-		return 0;
-
-	/* Reset back to the correct offset of header */
-	kbuff -= cap_info->count;
-	memcpy(&cap_info->header, kbuff, sizeof(cap_info->header));
-	pages_needed = ALIGN(cap_info->header.imagesize, PAGE_SIZE) / PAGE_SIZE;
+	pages_needed = ALIGN(cap_info->total_size, PAGE_SIZE) / PAGE_SIZE;
 
 	if (pages_needed == 0) {
 		pr_err("invalid capsule size");
@@ -84,7 +59,6 @@ static int efi_capsule_setup_info(struct capsule_info *cap_info,
 		return ret;
 	}
 
-	cap_info->total_size = cap_info->header.imagesize;
 	temp_page = krealloc(cap_info->pages,
 			     pages_needed * sizeof(void *),
 			     GFP_KERNEL | __GFP_ZERO);
@@ -97,6 +71,30 @@ static int efi_capsule_setup_info(struct capsule_info *cap_info,
 }
 
 /**
+ * efi_capsule_setup_info - obtain the efi capsule header in the binary and
+ *			    setup capsule_info structure
+ * @cap_info: pointer to current instance of capsule_info structure
+ * @kbuff: a mapped first page buffer pointer
+ * @hdr_bytes: the total received number of bytes for efi header
+ *
+ * Platforms with non-standard capsule update mechanisms can override
+ * this __weak function so they can perform any required capsule
+ * image munging. See quark_quirk_function() for an example.
+ **/
+int __weak efi_capsule_setup_info(struct capsule_info *cap_info, void *kbuff,
+				  size_t hdr_bytes)
+{
+	/* Only process data block that is larger than efi header size */
+	if (hdr_bytes < sizeof(efi_capsule_header_t))
+		return 0;
+
+	memcpy(&cap_info->header, kbuff, sizeof(cap_info->header));
+	cap_info->total_size = cap_info->header.imagesize;
+
+	return __efi_capsule_setup_info(cap_info);
+}
+
+/**
  * efi_capsule_submit_update - invoke the efi_capsule_update API once binary
  *			       upload done
  * @cap_info: pointer to current instance of capsule_info structure
@@ -186,7 +184,7 @@ static ssize_t efi_capsule_write(struct file *file, const char __user *buff,
 
 	/* Setup capsule binary info structure */
 	if (cap_info->header.headersize == 0) {
-		ret = efi_capsule_setup_info(cap_info, kbuff,
+		ret = efi_capsule_setup_info(cap_info, kbuff - cap_info->count,
 					     cap_info->count + write_byte);
 		if (ret)
 			goto fail_unmap;
diff --git a/include/linux/efi.h b/include/linux/efi.h
index 94d34e0be24f..af54be874dd0 100644
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -137,6 +137,18 @@ struct efi_boot_memmap {
 #define EFI_CAPSULE_POPULATE_SYSTEM_TABLE	0x00020000
 #define EFI_CAPSULE_INITIATE_RESET		0x00040000
 
+struct capsule_info {
+	efi_capsule_header_t	header;
+	int			reset_type;
+	long			index;
+	size_t			count;
+	size_t			total_size;
+	struct page		**pages;
+	size_t			page_bytes_remain;
+};
+
+int __efi_capsule_setup_info(struct capsule_info *cap_info);
+
 /*
  * Allocation types for calls to boottime->allocate_pages.
  */
-- 
2.12.0

[PATCH v2 2/3] efi/capsule-loader: Use page addresses rather than struct page pointers

[Jan Kiszka]

From: Ard Biesheuvel <ard.biesheuvel@linaro.org>

To give some leeway to code that handles non-standard capsule headers,
let's keep an array of page addresses rather than struct page pointers.

This gives special implementations of efi_capsule_setup_info() the
opportunity to mangle the payload a bit before it is presented to the
firmware, without putting any knowledge of the nature of such quirks
into the generic code.

Cc: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
 drivers/firmware/efi/capsule-loader.c | 12 ++++++++----
 drivers/firmware/efi/capsule.c        |  7 ++++---
 include/linux/efi.h                   |  4 ++--
 3 files changed, 14 insertions(+), 9 deletions(-)

diff --git a/drivers/firmware/efi/capsule-loader.c b/drivers/firmware/efi/capsule-loader.c
index f7fdeab0bc37..feeafb673c07 100644
--- a/drivers/firmware/efi/capsule-loader.c
+++ b/drivers/firmware/efi/capsule-loader.c
@@ -20,6 +20,10 @@
 
 #define NO_FURTHER_WRITE_ACTION -1
 
+#ifndef phys_to_page
+#define phys_to_page(x)		pfn_to_page((x) >> PAGE_SHIFT)
+#endif
+
 /**
  * efi_free_all_buff_pages - free all previous allocated buffer pages
  * @cap_info: pointer to current instance of capsule_info structure
@@ -31,7 +35,7 @@
 static void efi_free_all_buff_pages(struct capsule_info *cap_info)
 {
 	while (cap_info->index > 0)
-		__free_page(cap_info->pages[--cap_info->index]);
+		__free_page(phys_to_page(cap_info->pages[--cap_info->index]));
 
 	cap_info->index = NO_FURTHER_WRITE_ACTION;
 }
@@ -161,12 +165,12 @@ static ssize_t efi_capsule_write(struct file *file, const char __user *buff,
 			goto failed;
 		}
 
-		cap_info->pages[cap_info->index++] = page;
+		cap_info->pages[cap_info->index++] = page_to_phys(page);
 		cap_info->page_bytes_remain = PAGE_SIZE;
+	} else {
+		page = phys_to_page(cap_info->pages[cap_info->index - 1]);
 	}
 
-	page = cap_info->pages[cap_info->index - 1];
-
 	kbuff = kmap(page);
 	if (!kbuff) {
 		ret = -ENOMEM;
diff --git a/drivers/firmware/efi/capsule.c b/drivers/firmware/efi/capsule.c
index 6eedff45e6d7..57f85256feb2 100644
--- a/drivers/firmware/efi/capsule.c
+++ b/drivers/firmware/efi/capsule.c
@@ -214,7 +214,7 @@ efi_capsule_update_locked(efi_capsule_header_t *capsule,
  *
  * Return 0 on success, a converted EFI status code on failure.
  */
-int efi_capsule_update(efi_capsule_header_t *capsule, struct page **pages)
+int efi_capsule_update(efi_capsule_header_t *capsule, phys_addr_t *pages)
 {
 	u32 imagesize = capsule->imagesize;
 	efi_guid_t guid = capsule->guid;
@@ -253,10 +253,11 @@ int efi_capsule_update(efi_capsule_header_t *capsule, struct page **pages)
 		}
 
 		for (j = 0; j < SGLIST_PER_PAGE && count > 0; j++) {
-			u64 sz = min_t(u64, imagesize, PAGE_SIZE);
+			u64 sz = min_t(u64, imagesize,
+				       PAGE_SIZE - (u64)*pages % PAGE_SIZE);
 
 			sglist[j].length = sz;
-			sglist[j].data = page_to_phys(*pages++);
+			sglist[j].data = *pages++;
 
 			imagesize -= sz;
 			count--;
diff --git a/include/linux/efi.h b/include/linux/efi.h
index af54be874dd0..2cec67cc18a3 100644
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -143,7 +143,7 @@ struct capsule_info {
 	long			index;
 	size_t			count;
 	size_t			total_size;
-	struct page		**pages;
+	phys_addr_t		*pages;
 	size_t			page_bytes_remain;
 };
 
@@ -1415,7 +1415,7 @@ extern int efi_capsule_supported(efi_guid_t guid, u32 flags,
 				 size_t size, int *reset);
 
 extern int efi_capsule_update(efi_capsule_header_t *capsule,
-			      struct page **pages);
+			      phys_addr_t *pages);
 
 #ifdef CONFIG_EFI_RUNTIME_MAP
 int efi_runtime_map_init(struct kobject *);
-- 
2.12.0

[PATCH v2 3/3] efi/capsule: Add support for Quark security header

[Jan Kiszka]

The firmware for Quark X102x prepends a security header to the capsule
which is needed to support the mandatory secure boot on this processor.
The header can be detected by checking for the "_CSH" signature and -
to avoid any GUID conflict - validating its size field to contain the
expected value. Then we need to look for the EFI header right after the
security header and pass the real header to __efi_capsule_setup_info.

To be minimal invasive and maximal safe, the quirk version of
efi_capsule_identify_image is only effective on Quark processors.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
 arch/x86/platform/efi/quirks.c | 137 +++++++++++++++++++++++++++++++++++++++++
 drivers/firmware/efi/Kconfig   |   9 +++
 2 files changed, 146 insertions(+)

diff --git a/arch/x86/platform/efi/quirks.c b/arch/x86/platform/efi/quirks.c
index cdfe8c628959..8f41a75f8604 100644
--- a/arch/x86/platform/efi/quirks.c
+++ b/arch/x86/platform/efi/quirks.c
@@ -13,12 +13,66 @@
 #include <linux/dmi.h>
 #include <asm/efi.h>
 #include <asm/uv/uv.h>
+#include <asm/cpu_device_id.h>
 
 #define EFI_MIN_RESERVE 5120
 
 #define EFI_DUMMY_GUID \
 	EFI_GUID(0x4424ac57, 0xbe4b, 0x47dd, 0x9e, 0x97, 0xed, 0x50, 0xf0, 0x9f, 0x92, 0xa9)
 
+#define QUARK_CSH_SIGNATURE		0x5f435348	/* _CSH */
+#define QUARK_SECURITY_HEADER_SIZE	0x400
+
+/*
+ * Header prepended to the standard EFI capsule on Quark systems the are based
+ * on Intel firmware BSP.
+ * @csh_signature:	Unique identifier to sanity check signed module
+ * 			presence ("_CSH").
+ * @version:		Current version of CSH used. Should be one for Quark A0.
+ * @modulesize:		Size of the entire module including the module header
+ * 			and payload.
+ * @security_version_number_index: Index of SVN to use for validation of signed
+ * 			module.
+ * @security_version_number: Used to prevent against roll back of modules.
+ * @rsvd_module_id:	Currently unused for Clanton (Quark).
+ * @rsvd_module_vendor:	Vendor Identifier. For Intel products value is
+ * 			0x00008086.
+ * @rsvd_date:		BCD representation of build date as yyyymmdd, where
+ * 			yyyy=4 digit year, mm=1-12, dd=1-31.
+ * @headersize:		Total length of the header including including any
+ * 			padding optionally added by the signing tool.
+ * @hash_algo:		What Hash is used in the module signing.
+ * @cryp_algo:		What Crypto is used in the module signing.
+ * @keysize:		Total length of the key data including including any
+ * 			padding optionally added by the signing tool.
+ * @signaturesize:	Total length of the signature including including any
+ * 			padding optionally added by the signing tool.
+ * @rsvd_next_header:	32-bit pointer to the next Secure Boot Module in the
+ * 			chain, if there is a next header.
+ * @rsvd:		Reserved, padding structure to required size.
+ *
+ * See also QuartSecurityHeader_t in
+ * Quark_EDKII_v1.2.1.1/QuarkPlatformPkg/Include/QuarkBootRom.h
+ * from https://downloadcenter.intel.com/download/23197/Intel-Quark-SoC-X1000-Board-Support-Package-BSP
+ */
+struct quark_security_header {
+	u32 csh_signature;
+	u32 version;
+	u32 modulesize;
+	u32 security_version_number_index;
+	u32 security_version_number;
+	u32 rsvd_module_id;
+	u32 rsvd_module_vendor;
+	u32 rsvd_date;
+	u32 headersize;
+	u32 hash_algo;
+	u32 cryp_algo;
+	u32 keysize;
+	u32 signaturesize;
+	u32 rsvd_next_header;
+	u32 rsvd[2];
+};
+
 static efi_char16_t efi_dummy_name[6] = { 'D', 'U', 'M', 'M', 'Y', 0 };
 
 static bool efi_no_storage_paranoia;
@@ -499,3 +553,86 @@ bool efi_poweroff_required(void)
 {
 	return acpi_gbl_reduced_hardware || acpi_no_s5;
 }
+
+#ifdef CONFIG_EFI_CAPSULE_QUIRK_QUARK_CSH
+
+static int qrk_capsule_setup_info(struct capsule_info *cap_info, void **pkbuff,
+				  size_t hdr_bytes)
+{
+	struct quark_security_header *csh = *pkbuff;
+
+	/* Only process data block that is larger than the security header */
+	if (hdr_bytes < sizeof(struct quark_security_header))
+		return 0;
+
+	if (csh->csh_signature != QUARK_CSH_SIGNATURE ||
+	    csh->headersize != QUARK_SECURITY_HEADER_SIZE)
+		return 1;
+
+	/* Only process data block if EFI header is included */
+	if (hdr_bytes < QUARK_SECURITY_HEADER_SIZE +
+			sizeof(efi_capsule_header_t))
+		return 0;
+
+	pr_debug("Quark security header detected\n");
+
+	if (csh->rsvd_next_header != 0) {
+		pr_err("multiple Quark security headers not supported\n");
+		return -EINVAL;
+	}
+
+	*pkbuff += csh->headersize;
+	cap_info->total_size = csh->headersize;
+
+	/*
+	 * Update the first page pointer to skip over the CSH header.
+	 */
+	cap_info->pages[0] += csh->headersize;
+
+	return 1;
+}
+
+#define ICPU(family, model, quirk_handler) \
+	{ X86_VENDOR_INTEL, family, model, X86_FEATURE_ANY, \
+	  (unsigned long)&quirk_handler }
+
+static const struct x86_cpu_id efi_capsule_quirk_ids[] = {
+	ICPU(5, 9, qrk_capsule_setup_info),	/* Intel Quark X1000 */
+	{ }
+};
+
+int efi_capsule_setup_info(struct capsule_info *cap_info, void *kbuff,
+			   size_t hdr_bytes)
+{
+	int (*quirk_handler)(struct capsule_info *, void **, size_t);
+	const struct x86_cpu_id *id;
+	int ret;
+
+	if (hdr_bytes < sizeof(efi_capsule_header_t))
+		return 0;
+
+	cap_info->total_size = 0;
+
+	id = x86_match_cpu(efi_capsule_quirk_ids);
+	if (id) {
+		/*
+		 * The quirk handler is supposed to return
+		 *  - a value > 0 if the setup should continue, after advancing
+		 *    kbuff as needed
+		 *  - 0 if not enough hdr_bytes are available yet
+		 *  - a negative error code otherwise
+		 */
+		quirk_handler = (typeof(quirk_handler))id->driver_data;
+		ret = quirk_handler(cap_info, &kbuff, hdr_bytes);
+		if (ret <= 0)
+			return ret;
+	}
+
+	memcpy(&cap_info->header, kbuff, sizeof(cap_info->header));
+
+	cap_info->total_size += cap_info->header.imagesize;
+
+	return __efi_capsule_setup_info(cap_info);
+}
+
+#endif
diff --git a/drivers/firmware/efi/Kconfig b/drivers/firmware/efi/Kconfig
index 2e78b0b96d74..394db40ed374 100644
--- a/drivers/firmware/efi/Kconfig
+++ b/drivers/firmware/efi/Kconfig
@@ -112,6 +112,15 @@ config EFI_CAPSULE_LOADER
 
 	  Most users should say N.
 
+config EFI_CAPSULE_QUIRK_QUARK_CSH
+	boolean "Add support for Quark capsules with non-standard headers"
+	depends on X86 && !64BIT
+	select EFI_CAPSULE_LOADER
+	default y
+	help
+	  Add support for processing Quark X1000 EFI capsules, whose header
+	  layout deviates from the layout mandated by the UEFI specification.
+
 config EFI_TEST
 	tristate "EFI Runtime Service Tests Support"
 	depends on EFI
-- 
2.12.0

Re: [PATCH v2 3/3] efi/capsule: Add support for Quark security header

[Andy Shevchenko]

On Wed, Apr 19, 2017 at 9:33 PM, Jan Kiszka <jan.kiszka@siemens.com> wrote:
> The firmware for Quark X102x prepends a security header to the capsule
> which is needed to support the mandatory secure boot on this processor.
> The header can be detected by checking for the "_CSH" signature and -
> to avoid any GUID conflict - validating its size field to contain the
> expected value. Then we need to look for the EFI header right after the
> security header and pass the real header to __efi_capsule_setup_info.
>
> To be minimal invasive and maximal safe, the quirk version of
> efi_capsule_identify_image is only effective on Quark processors.
>

FWIW:
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
> ---
>  arch/x86/platform/efi/quirks.c | 137 +++++++++++++++++++++++++++++++++++++++++
>  drivers/firmware/efi/Kconfig   |   9 +++
>  2 files changed, 146 insertions(+)
>
> diff --git a/arch/x86/platform/efi/quirks.c b/arch/x86/platform/efi/quirks.c
> index cdfe8c628959..8f41a75f8604 100644
> --- a/arch/x86/platform/efi/quirks.c
> +++ b/arch/x86/platform/efi/quirks.c
> @@ -13,12 +13,66 @@
>  #include <linux/dmi.h>
>  #include <asm/efi.h>
>  #include <asm/uv/uv.h>
> +#include <asm/cpu_device_id.h>
>
>  #define EFI_MIN_RESERVE 5120
>
>  #define EFI_DUMMY_GUID \
>         EFI_GUID(0x4424ac57, 0xbe4b, 0x47dd, 0x9e, 0x97, 0xed, 0x50, 0xf0, 0x9f, 0x92, 0xa9)
>
> +#define QUARK_CSH_SIGNATURE            0x5f435348      /* _CSH */
> +#define QUARK_SECURITY_HEADER_SIZE     0x400
> +
> +/*
> + * Header prepended to the standard EFI capsule on Quark systems the are based
> + * on Intel firmware BSP.
> + * @csh_signature:     Unique identifier to sanity check signed module
> + *                     presence ("_CSH").
> + * @version:           Current version of CSH used. Should be one for Quark A0.
> + * @modulesize:                Size of the entire module including the module header
> + *                     and payload.
> + * @security_version_number_index: Index of SVN to use for validation of signed
> + *                     module.
> + * @security_version_number: Used to prevent against roll back of modules.
> + * @rsvd_module_id:    Currently unused for Clanton (Quark).
> + * @rsvd_module_vendor:        Vendor Identifier. For Intel products value is
> + *                     0x00008086.
> + * @rsvd_date:         BCD representation of build date as yyyymmdd, where
> + *                     yyyy=4 digit year, mm=1-12, dd=1-31.
> + * @headersize:                Total length of the header including including any
> + *                     padding optionally added by the signing tool.
> + * @hash_algo:         What Hash is used in the module signing.
> + * @cryp_algo:         What Crypto is used in the module signing.
> + * @keysize:           Total length of the key data including including any
> + *                     padding optionally added by the signing tool.
> + * @signaturesize:     Total length of the signature including including any
> + *                     padding optionally added by the signing tool.
> + * @rsvd_next_header:  32-bit pointer to the next Secure Boot Module in the
> + *                     chain, if there is a next header.
> + * @rsvd:              Reserved, padding structure to required size.
> + *
> + * See also QuartSecurityHeader_t in
> + * Quark_EDKII_v1.2.1.1/QuarkPlatformPkg/Include/QuarkBootRom.h
> + * from https://downloadcenter.intel.com/download/23197/Intel-Quark-SoC-X1000-Board-Support-Package-BSP
> + */
> +struct quark_security_header {
> +       u32 csh_signature;
> +       u32 version;
> +       u32 modulesize;
> +       u32 security_version_number_index;
> +       u32 security_version_number;
> +       u32 rsvd_module_id;
> +       u32 rsvd_module_vendor;
> +       u32 rsvd_date;
> +       u32 headersize;
> +       u32 hash_algo;
> +       u32 cryp_algo;
> +       u32 keysize;
> +       u32 signaturesize;
> +       u32 rsvd_next_header;
> +       u32 rsvd[2];
> +};
> +
>  static efi_char16_t efi_dummy_name[6] = { 'D', 'U', 'M', 'M', 'Y', 0 };
>
>  static bool efi_no_storage_paranoia;
> @@ -499,3 +553,86 @@ bool efi_poweroff_required(void)
>  {
>         return acpi_gbl_reduced_hardware || acpi_no_s5;
>  }
> +
> +#ifdef CONFIG_EFI_CAPSULE_QUIRK_QUARK_CSH
> +
> +static int qrk_capsule_setup_info(struct capsule_info *cap_info, void **pkbuff,
> +                                 size_t hdr_bytes)
> +{
> +       struct quark_security_header *csh = *pkbuff;
> +
> +       /* Only process data block that is larger than the security header */
> +       if (hdr_bytes < sizeof(struct quark_security_header))
> +               return 0;
> +
> +       if (csh->csh_signature != QUARK_CSH_SIGNATURE ||
> +           csh->headersize != QUARK_SECURITY_HEADER_SIZE)
> +               return 1;
> +
> +       /* Only process data block if EFI header is included */
> +       if (hdr_bytes < QUARK_SECURITY_HEADER_SIZE +
> +                       sizeof(efi_capsule_header_t))
> +               return 0;
> +
> +       pr_debug("Quark security header detected\n");
> +
> +       if (csh->rsvd_next_header != 0) {
> +               pr_err("multiple Quark security headers not supported\n");
> +               return -EINVAL;
> +       }
> +
> +       *pkbuff += csh->headersize;
> +       cap_info->total_size = csh->headersize;
> +
> +       /*
> +        * Update the first page pointer to skip over the CSH header.
> +        */
> +       cap_info->pages[0] += csh->headersize;
> +
> +       return 1;
> +}
> +
> +#define ICPU(family, model, quirk_handler) \
> +       { X86_VENDOR_INTEL, family, model, X86_FEATURE_ANY, \
> +         (unsigned long)&quirk_handler }
> +
> +static const struct x86_cpu_id efi_capsule_quirk_ids[] = {
> +       ICPU(5, 9, qrk_capsule_setup_info),     /* Intel Quark X1000 */
> +       { }
> +};
> +
> +int efi_capsule_setup_info(struct capsule_info *cap_info, void *kbuff,
> +                          size_t hdr_bytes)
> +{
> +       int (*quirk_handler)(struct capsule_info *, void **, size_t);
> +       const struct x86_cpu_id *id;
> +       int ret;
> +
> +       if (hdr_bytes < sizeof(efi_capsule_header_t))
> +               return 0;
> +
> +       cap_info->total_size = 0;
> +
> +       id = x86_match_cpu(efi_capsule_quirk_ids);
> +       if (id) {
> +               /*
> +                * The quirk handler is supposed to return
> +                *  - a value > 0 if the setup should continue, after advancing
> +                *    kbuff as needed
> +                *  - 0 if not enough hdr_bytes are available yet
> +                *  - a negative error code otherwise
> +                */
> +               quirk_handler = (typeof(quirk_handler))id->driver_data;
> +               ret = quirk_handler(cap_info, &kbuff, hdr_bytes);
> +               if (ret <= 0)
> +                       return ret;
> +       }
> +
> +       memcpy(&cap_info->header, kbuff, sizeof(cap_info->header));
> +
> +       cap_info->total_size += cap_info->header.imagesize;
> +
> +       return __efi_capsule_setup_info(cap_info);
> +}
> +
> +#endif
> diff --git a/drivers/firmware/efi/Kconfig b/drivers/firmware/efi/Kconfig
> index 2e78b0b96d74..394db40ed374 100644
> --- a/drivers/firmware/efi/Kconfig
> +++ b/drivers/firmware/efi/Kconfig
> @@ -112,6 +112,15 @@ config EFI_CAPSULE_LOADER
>
>           Most users should say N.
>
> +config EFI_CAPSULE_QUIRK_QUARK_CSH
> +       boolean "Add support for Quark capsules with non-standard headers"
> +       depends on X86 && !64BIT
> +       select EFI_CAPSULE_LOADER
> +       default y
> +       help
> +         Add support for processing Quark X1000 EFI capsules, whose header
> +         layout deviates from the layout mandated by the UEFI specification.
> +
>  config EFI_TEST
>         tristate "EFI Runtime Service Tests Support"
>         depends on EFI
> --
> 2.12.0
>



-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v2 0/3] efi: add support for non-standard capsule headers

[Bryan O'Donoghue]

On 19/04/17 19:32, Jan Kiszka wrote:
> This picks up the patches Ard send before in [1], including the
> "left-over" patches 6..8.
>
> As Ard suggested, I've taken updated patches 6 and 7 of him from [2]
> which address reviewer comments. Furthermore, I've changed patch 8 to
> factor out the Quark quirk logic from the overloaded
> efi_capsule_setup_info as requested by Matt and also applied Andy's
> suggestion to have a quirk dispatcher table with callbacks.
>
> Tested successfully on the IOT2040 - still without a working Galileo
> board.

I'll run it on a Galileo for you today.

Re: [PATCH v2 0/3] efi: add support for non-standard capsule headers

[Bryan O'Donoghue]

On 19/04/17 19:32, Jan Kiszka wrote:
> This picks up the patches Ard send before in [1], including the
> "left-over" patches 6..8.
>
> As Ard suggested, I've taken updated patches 6 and 7 of him from [2]
> which address reviewer comments. Furthermore, I've changed patch 8 to
> factor out the Quark quirk logic from the overloaded
> efi_capsule_setup_info as requested by Matt and also applied Andy's
> suggestion to have a quirk dispatcher table with callbacks.
>
> Tested successfully on the IOT2040 - still without a working Galileo
> board.
>
> Jan
>
> [1] http://www.spinics.net/lists/linux-efi/msg11194.html
> [2] https://git.kernel.org/pub/scm/linux/kernel/git/ardb/linux.git/log/?h=quark-capsule
>
> Cc: Matt Fleming <matt@codeblueprint.co.uk>
>
> Ard Biesheuvel (2):
>   efi/capsule-loader: Redirect calls to efi_capsule_setup_info via weak
>     alias
>   efi/capsule-loader: Use page addresses rather than struct page
>     pointers
>
> Jan Kiszka (1):
>   efi/capsule: Add support for Quark security header
>
>  arch/x86/platform/efi/quirks.c        | 137 ++++++++++++++++++++++++++++++++++
>  drivers/firmware/efi/Kconfig          |   9 +++
>  drivers/firmware/efi/capsule-loader.c |  66 ++++++++--------
>  drivers/firmware/efi/capsule.c        |   7 +-
>  include/linux/efi.h                   |  14 +++-
>  5 files changed, 197 insertions(+), 36 deletions(-)
>

Still looks good, nothing's broken on Galileo.

Please feel free to add my

Tested-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>

To your patches

Re: [PATCH v2 0/3] efi: add support for non-standard capsule headers

[Matt Fleming]

On Wed, 19 Apr, at 08:32:59PM, Jan Kiszka wrote:
> This picks up the patches Ard send before in [1], including the
> "left-over" patches 6..8.
> 
> As Ard suggested, I've taken updated patches 6 and 7 of him from [2]
> which address reviewer comments. Furthermore, I've changed patch 8 to
> factor out the Quark quirk logic from the overloaded
> efi_capsule_setup_info as requested by Matt and also applied Andy's
> suggestion to have a quirk dispatcher table with callbacks.
> 
> Tested successfully on the IOT2040 - still without a working Galileo
> board.
> 
> Jan
> 
> [1] http://www.spinics.net/lists/linux-efi/msg11194.html
> [2] https://git.kernel.org/pub/scm/linux/kernel/git/ardb/linux.git/log/?h=quark-capsule
> 
> Cc: Matt Fleming <matt@codeblueprint.co.uk>
> 
> Ard Biesheuvel (2):
>   efi/capsule-loader: Redirect calls to efi_capsule_setup_info via weak
>     alias
>   efi/capsule-loader: Use page addresses rather than struct page
>     pointers
> 
> Jan Kiszka (1):
>   efi/capsule: Add support for Quark security header
> 
>  arch/x86/platform/efi/quirks.c        | 137 ++++++++++++++++++++++++++++++++++
>  drivers/firmware/efi/Kconfig          |   9 +++
>  drivers/firmware/efi/capsule-loader.c |  66 ++++++++--------
>  drivers/firmware/efi/capsule.c        |   7 +-
>  include/linux/efi.h                   |  14 +++-
>  5 files changed, 197 insertions(+), 36 deletions(-)

OK, this looks like it's in good shape to me.

Ard, are we waiting for anything else before we queue this up for
v4.13?

Re: [PATCH v2 0/3] efi: add support for non-standard capsule headers

[Ard Biesheuvel]

On 25 April 2017 at 16:00, Matt Fleming <matt@codeblueprint.co.uk> wrote:
> On Wed, 19 Apr, at 08:32:59PM, Jan Kiszka wrote:
>> This picks up the patches Ard send before in [1], including the
>> "left-over" patches 6..8.
>>
>> As Ard suggested, I've taken updated patches 6 and 7 of him from [2]
>> which address reviewer comments. Furthermore, I've changed patch 8 to
>> factor out the Quark quirk logic from the overloaded
>> efi_capsule_setup_info as requested by Matt and also applied Andy's
>> suggestion to have a quirk dispatcher table with callbacks.
>>
>> Tested successfully on the IOT2040 - still without a working Galileo
>> board.
>>
>> Jan
>>
>> [1] http://www.spinics.net/lists/linux-efi/msg11194.html
>> [2] https://git.kernel.org/pub/scm/linux/kernel/git/ardb/linux.git/log/?h=quark-capsule
>>
>> Cc: Matt Fleming <matt@codeblueprint.co.uk>
>>
>> Ard Biesheuvel (2):
>>   efi/capsule-loader: Redirect calls to efi_capsule_setup_info via weak
>>     alias
>>   efi/capsule-loader: Use page addresses rather than struct page
>>     pointers
>>
>> Jan Kiszka (1):
>>   efi/capsule: Add support for Quark security header
>>
>>  arch/x86/platform/efi/quirks.c        | 137 ++++++++++++++++++++++++++++++++++
>>  drivers/firmware/efi/Kconfig          |   9 +++
>>  drivers/firmware/efi/capsule-loader.c |  66 ++++++++--------
>>  drivers/firmware/efi/capsule.c        |   7 +-
>>  include/linux/efi.h                   |  14 +++-
>>  5 files changed, 197 insertions(+), 36 deletions(-)
>
> OK, this looks like it's in good shape to me.
>
> Ard, are we waiting for anything else before we queue this up for
> v4.13?

Ideally, we'd get someone to test it with compliant capsule headers,
but I'm happy to just queue it for v4.13, and get it in -next asap
(i.e., right after the merge window closes)

Re: [PATCH v2 0/3] efi: add support for non-standard capsule headers

[Bryan O'Donoghue]

On 25/04/17 16:01, Ard Biesheuvel wrote:
> On 25 April 2017 at 16:00, Matt Fleming <matt@codeblueprint.co.uk> wrote:
>> On Wed, 19 Apr, at 08:32:59PM, Jan Kiszka wrote:
>>> This picks up the patches Ard send before in [1], including the
>>> "left-over" patches 6..8.
>>>
>>> As Ard suggested, I've taken updated patches 6 and 7 of him from [2]
>>> which address reviewer comments. Furthermore, I've changed patch 8 to
>>> factor out the Quark quirk logic from the overloaded
>>> efi_capsule_setup_info as requested by Matt and also applied Andy's
>>> suggestion to have a quirk dispatcher table with callbacks.
>>>
>>> Tested successfully on the IOT2040 - still without a working Galileo
>>> board.
>>>
>>> Jan
>>>
>>> [1] http://www.spinics.net/lists/linux-efi/msg11194.html
>>> [2] https://git.kernel.org/pub/scm/linux/kernel/git/ardb/linux.git/log/?h=quark-capsule
>>>
>>> Cc: Matt Fleming <matt@codeblueprint.co.uk>
>>>
>>> Ard Biesheuvel (2):
>>>   efi/capsule-loader: Redirect calls to efi_capsule_setup_info via weak
>>>     alias
>>>   efi/capsule-loader: Use page addresses rather than struct page
>>>     pointers
>>>
>>> Jan Kiszka (1):
>>>   efi/capsule: Add support for Quark security header
>>>
>>>  arch/x86/platform/efi/quirks.c        | 137 ++++++++++++++++++++++++++++++++++
>>>  drivers/firmware/efi/Kconfig          |   9 +++
>>>  drivers/firmware/efi/capsule-loader.c |  66 ++++++++--------
>>>  drivers/firmware/efi/capsule.c        |   7 +-
>>>  include/linux/efi.h                   |  14 +++-
>>>  5 files changed, 197 insertions(+), 36 deletions(-)
>>
>> OK, this looks like it's in good shape to me.
>>
>> Ard, are we waiting for anything else before we queue this up for
>> v4.13?
> 
> Ideally, we'd get someone to test it with compliant capsule headers,
> but I'm happy to just queue it for v4.13, and get it in -next asap
> (i.e., right after the merge window closes)
> 

I'm OOO until Thursday however, I could test this out on a Galileo for
you with the CSH stripped out. As Jan has pointed out Galileo aka Quark
x1000 non-secure (not to be called insecure) will just skips past the
CSH anyway - so - we can give it a conformant capsule by stripping the
CSH junk off the top.

How about you queue it up and I'll let you know if there's a problem
Thursday?

-- 
bod

Re: [PATCH v2 0/3] efi: add support for non-standard capsule headers

[Ard Biesheuvel]

On 25 April 2017 at 16:07, Bryan O'Donoghue
<pure.logic@nexus-software.ie> wrote:
> On 25/04/17 16:01, Ard Biesheuvel wrote:
>> On 25 April 2017 at 16:00, Matt Fleming <matt@codeblueprint.co.uk> wrote:
>>> On Wed, 19 Apr, at 08:32:59PM, Jan Kiszka wrote:
>>>> This picks up the patches Ard send before in [1], including the
>>>> "left-over" patches 6..8.
>>>>
>>>> As Ard suggested, I've taken updated patches 6 and 7 of him from [2]
>>>> which address reviewer comments. Furthermore, I've changed patch 8 to
>>>> factor out the Quark quirk logic from the overloaded
>>>> efi_capsule_setup_info as requested by Matt and also applied Andy's
>>>> suggestion to have a quirk dispatcher table with callbacks.
>>>>
>>>> Tested successfully on the IOT2040 - still without a working Galileo
>>>> board.
>>>>
>>>> Jan
>>>>
>>>> [1] http://www.spinics.net/lists/linux-efi/msg11194.html
>>>> [2] https://git.kernel.org/pub/scm/linux/kernel/git/ardb/linux.git/log/?h=quark-capsule
>>>>
>>>> Cc: Matt Fleming <matt@codeblueprint.co.uk>
>>>>
>>>> Ard Biesheuvel (2):
>>>>   efi/capsule-loader: Redirect calls to efi_capsule_setup_info via weak
>>>>     alias
>>>>   efi/capsule-loader: Use page addresses rather than struct page
>>>>     pointers
>>>>
>>>> Jan Kiszka (1):
>>>>   efi/capsule: Add support for Quark security header
>>>>
>>>>  arch/x86/platform/efi/quirks.c        | 137 ++++++++++++++++++++++++++++++++++
>>>>  drivers/firmware/efi/Kconfig          |   9 +++
>>>>  drivers/firmware/efi/capsule-loader.c |  66 ++++++++--------
>>>>  drivers/firmware/efi/capsule.c        |   7 +-
>>>>  include/linux/efi.h                   |  14 +++-
>>>>  5 files changed, 197 insertions(+), 36 deletions(-)
>>>
>>> OK, this looks like it's in good shape to me.
>>>
>>> Ard, are we waiting for anything else before we queue this up for
>>> v4.13?
>>
>> Ideally, we'd get someone to test it with compliant capsule headers,
>> but I'm happy to just queue it for v4.13, and get it in -next asap
>> (i.e., right after the merge window closes)
>>
>
> I'm OOO until Thursday however, I could test this out on a Galileo for
> you with the CSH stripped out. As Jan has pointed out Galileo aka Quark
> x1000 non-secure (not to be called insecure) will just skips past the
> CSH anyway - so - we can give it a conformant capsule by stripping the
> CSH junk off the top.
>
> How about you queue it up and I'll let you know if there's a problem
> Thursday?
>

That would be highly appreciated, thanks.

Re: [PATCH v2 0/3] efi: add support for non-standard capsule headers

[Ard Biesheuvel]

On 27 April 2017 at 13:46, Bryan O'Donoghue
<pure.logic@nexus-software.ie> wrote:
> On 25/04/17 16:08, Ard Biesheuvel wrote:
>>
>> On 25 April 2017 at 16:07, Bryan O'Donoghue
>>>
>>> I'm OOO until Thursday however, I could test this out on a Galileo for
>>> you with the CSH stripped out. As Jan has pointed out Galileo aka Quark
>>> x1000 non-secure (not to be called insecure) will just skips past the
>>> CSH anyway - so - we can give it a conformant capsule by stripping the
>>> CSH junk off the top.
>>>
>>> How about you queue it up and I'll let you know if there's a problem
>>> Thursday?
>>>
>>
>> That would be highly appreciated, thanks.
>>
>
> Looks good.
>
> I stripped the header
> dd skip=1024 bs=1 if=firmware.cap of=firmware-no-csh.cap
>
> Downloaded the now conformat capsule and update/reflash succeeded.
>

Thanks. I will go ahead and queue these patches for v4.13 with your
Tested-by added.

Re: [PATCH v2 0/3] efi: add support for non-standard capsule headers

[Bryan O'Donoghue]

On 25/04/17 16:08, Ard Biesheuvel wrote:
> On 25 April 2017 at 16:07, Bryan O'Donoghue
>> I'm OOO until Thursday however, I could test this out on a Galileo for
>> you with the CSH stripped out. As Jan has pointed out Galileo aka Quark
>> x1000 non-secure (not to be called insecure) will just skips past the
>> CSH anyway - so - we can give it a conformant capsule by stripping the
>> CSH junk off the top.
>>
>> How about you queue it up and I'll let you know if there's a problem
>> Thursday?
>>
>
> That would be highly appreciated, thanks.
>

Looks good.

I stripped the header
dd skip=1024 bs=1 if=firmware.cap of=firmware-no-csh.cap

Downloaded the now conformat capsule and update/reflash succeeded.

---
bod

Re: [PATCH v2 0/3] efi: add support for non-standard capsule headers

[Ard Biesheuvel]

On 27 April 2017 at 13:42, Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote:
> On 27 April 2017 at 13:46, Bryan O'Donoghue
> <pure.logic@nexus-software.ie> wrote:
>> On 25/04/17 16:08, Ard Biesheuvel wrote:
>>>
>>> On 25 April 2017 at 16:07, Bryan O'Donoghue
>>>>
>>>> I'm OOO until Thursday however, I could test this out on a Galileo for
>>>> you with the CSH stripped out. As Jan has pointed out Galileo aka Quark
>>>> x1000 non-secure (not to be called insecure) will just skips past the
>>>> CSH anyway - so - we can give it a conformant capsule by stripping the
>>>> CSH junk off the top.
>>>>
>>>> How about you queue it up and I'll let you know if there's a problem
>>>> Thursday?
>>>>
>>>
>>> That would be highly appreciated, thanks.
>>>
>>
>> Looks good.
>>
>> I stripped the header
>> dd skip=1024 bs=1 if=firmware.cap of=firmware-no-csh.cap
>>
>> Downloaded the now conformat capsule and update/reflash succeeded.
>>
>
> Thanks. I will go ahead and queue these patches for v4.13 with your
> Tested-by added.

Queued for v4.13 -- thanks all