From: Dillon Min <dillon.minfei@gmail.com>
To: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
mchehab+huawei@kernel.org, ezequiel@collabora.com,
gnurou@gmail.com, Pi-Hsun Shih <pihsun@chromium.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre TORGUE <alexandre.torgue@foss.st.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
gabriel.fernandez@st.com, gabriel.fernandez@foss.st.com,
Patrice CHOTARD <patrice.chotard@foss.st.com>,
hugues.fruchet@foss.st.com,
linux-media <linux-media@vger.kernel.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
linux-stm32@st-md-mailman.stormreply.com,
Linux ARM <linux-arm-kernel@lists.infradead.org>,
linux-clk <linux-clk@vger.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>
Subject: Re: [PATCH v4 6/8] media: v4l2-ctrls: Add RGB color effects control
Date: Thu, 14 Oct 2021 22:00:54 +0800 [thread overview]
Message-ID: <CAL9mu0KLckxypYMc=mWRrXYOiwLeo98rNBWLwzA2gK9JJEHf1Q@mail.gmail.com> (raw)
In-Reply-To: <1d0e5b17-dd2c-d3d3-c514-775806ae99c9@xs4all.nl>
On Thu, 14 Oct 2021 at 19:22, Hans Verkuil <hverkuil-cisco@xs4all.nl> wrote:
>
> On 14/10/2021 12:53, Dillon Min wrote:
> > Hi Hans
> >
> > Thanks for quick reply
> >
> > On Thu, 14 Oct 2021 at 18:44, Hans Verkuil <hverkuil-cisco@xs4all.nl> wrote:
> >>
> >> On 14/10/2021 12:25, dillon.minfei@gmail.com wrote:
> >>> From: Dillon Min <dillon.minfei@gmail.com>
> >>>
> >>> Add V4L2_COLORFX_SET_RGB color effects control, V4L2_CID_COLORFX_RGB
> >>> for RGB color setting.
> >>>
> >>> Signed-off-by: Dillon Min <dillon.minfei@gmail.com>
> >>> ---
> >>> v4:
> >>> - replace V4L2_COLORFX_SET_ARGB, V4L2_CID_COLORFX_ARGB to
> >>> V4L2_COLORFX_SET_RGB, V4L2_CID_COLORFX_RGB since Alpha paramter not used
> >>> in current. thanks Hans.
> >>>
> >>> Documentation/userspace-api/media/v4l/control.rst | 9 +++++++++
> >>> drivers/media/v4l2-core/v4l2-ctrls-defs.c | 2 ++
> >>> include/uapi/linux/v4l2-controls.h | 4 +++-
> >>> 3 files changed, 14 insertions(+), 1 deletion(-)
> >>>
> >>> diff --git a/Documentation/userspace-api/media/v4l/control.rst b/Documentation/userspace-api/media/v4l/control.rst
> >>> index f8d0b923da20..3eec65174260 100644
> >>> --- a/Documentation/userspace-api/media/v4l/control.rst
> >>> +++ b/Documentation/userspace-api/media/v4l/control.rst
> >>> @@ -242,8 +242,17 @@ Control IDs
> >>> * - ``V4L2_COLORFX_SET_CBCR``
> >>> - The Cb and Cr chroma components are replaced by fixed coefficients
> >>> determined by ``V4L2_CID_COLORFX_CBCR`` control.
> >>> + * - ``V4L2_COLORFX_SET_RGB``
> >>> + - The RGB components are replaced by the fixed RGB components determined
> >>> + by ``V4L2_CID_COLORFX_RGB`` control.
> >>>
> >>>
> >>> +``V4L2_CID_COLORFX_RGB`` ``(integer)``
> >>> + Determines the Red, Green, and Blue coefficients for
> >>> + ``V4L2_COLORFX_SET_RGB`` color effect.
> >>> + Bits [7:0] of the supplied 32 bit value are interpreted as Blue component,
> >>> + bits [15:8] as Green component, bits [23:16] as Red component, and
> >>> + bits [31:24] must be zero.
> >>>
> >>> ``V4L2_CID_COLORFX_CBCR`` ``(integer)``
> >>> Determines the Cb and Cr coefficients for ``V4L2_COLORFX_SET_CBCR``
> >>> diff --git a/drivers/media/v4l2-core/v4l2-ctrls-defs.c b/drivers/media/v4l2-core/v4l2-ctrls-defs.c
> >>> index 421300e13a41..f4bd90170105 100644
> >>> --- a/drivers/media/v4l2-core/v4l2-ctrls-defs.c
> >>> +++ b/drivers/media/v4l2-core/v4l2-ctrls-defs.c
> >>> @@ -785,6 +785,7 @@ const char *v4l2_ctrl_get_name(u32 id)
> >>> case V4L2_CID_MIN_BUFFERS_FOR_OUTPUT: return "Min Number of Output Buffers";
> >>> case V4L2_CID_ALPHA_COMPONENT: return "Alpha Component";
> >>> case V4L2_CID_COLORFX_CBCR: return "Color Effects, CbCr";
> >>> + case V4L2_CID_COLORFX_RGB: return "Color Effects, RGB";
> >>>
> >>> /*
> >>> * Codec controls
> >>> @@ -1392,6 +1393,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
> >>> *min = *max = *step = *def = 0;
> >>> break;
> >>> case V4L2_CID_BG_COLOR:
> >>> + case V4L2_CID_COLORFX_RGB:
> >>> *type = V4L2_CTRL_TYPE_INTEGER;
> >>> *step = 1;
> >>> *min = 0;
> >>
> >> Can you make another small change here? Please change:
> >>
> >> *max = 0xFFFFFF;
> >>
> >> to:
> >>
> >> *max = 0xffffff;
> >>
> >> to keep in line with the coding standard for hex values.
> >
> > Sure, do it right now.
> >
> >>
> >> Also, can you add a separate patch that adds an entry here for V4L2_CID_COLORFX_CBCR
> >> that sets *max to 0xffff? I noticed that that was missing. While adding V4L2_CID_COLORFX_RGB
> >> it's good to fix V4L2_CID_COLORFX_CBCR as well.
> >
> > Sure, you mean the final code like this? first patch to fix cbcr 0xFFFFFF,
>
> For cbcr max should be 0xffff.
Sure.
>
> > another one to add V4L2_CID_COLORFX_RGB entry.
> >
> > 1395 case V4L2_CID_BG_COLOR:
> > 1396 case V4L2_CID_COLORFX_RGB:
> > 1397 *type = V4L2_CTRL_TYPE_INTEGER;
> > 1398 *step = 1;
> > 1399 *min = 0;
> > 1400 /* Max is calculated as RGB888 that is 2^24 */
>
> Actually, the comment is wrong: it should be 2^24-1. Let's fix that too.
Okay.
>
> > 1401 *max = 0xffffff;
>
> Yes, that's what I am looking for.
>
> Regards,
>
> Hans
>
> > 1402 break;
> >
> > Best Regards
> > Dillon
> >
> >>
> >> Regards,
> >>
> >> Hans
> >>
> >>> diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h
> >>> index 5532b5f68493..9aa3fd368383 100644
> >>> --- a/include/uapi/linux/v4l2-controls.h
> >>> +++ b/include/uapi/linux/v4l2-controls.h
> >>> @@ -128,6 +128,7 @@ enum v4l2_colorfx {
> >>> V4L2_COLORFX_SOLARIZATION = 13,
> >>> V4L2_COLORFX_ANTIQUE = 14,
> >>> V4L2_COLORFX_SET_CBCR = 15,
> >>> + V4L2_COLORFX_SET_RGB = 16,
> >>> };
> >>> #define V4L2_CID_AUTOBRIGHTNESS (V4L2_CID_BASE+32)
> >>> #define V4L2_CID_BAND_STOP_FILTER (V4L2_CID_BASE+33)
> >>> @@ -145,9 +146,10 @@ enum v4l2_colorfx {
> >>>
> >>> #define V4L2_CID_ALPHA_COMPONENT (V4L2_CID_BASE+41)
> >>> #define V4L2_CID_COLORFX_CBCR (V4L2_CID_BASE+42)
> >>> +#define V4L2_CID_COLORFX_RGB (V4L2_CID_BASE+43)
> >>>
> >>> /* last CID + 1 */
> >>> -#define V4L2_CID_LASTP1 (V4L2_CID_BASE+43)
> >>> +#define V4L2_CID_LASTP1 (V4L2_CID_BASE+44)
> >>>
> >>> /* USER-class private control IDs */
> >>>
> >>>
> >>
>
Best Regards.
Dillon
next prev parent reply other threads:[~2021-10-14 14:01 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-14 10:24 [PATCH v4 0/8] Add support for DMA2D of STMicroelectronics STM32 Soc series dillon.minfei
2021-10-14 10:24 ` [PATCH v4 1/8] media: admin-guide: add stm32-dma2d description dillon.minfei
2021-10-14 10:25 ` [PATCH v4 2/8] media: dt-bindings: media: add document for STM32 DMA2d bindings dillon.minfei
2021-10-14 10:25 ` [PATCH v4 3/8] ARM: dts: stm32: Add DMA2D support for STM32F429 series soc dillon.minfei
2021-10-14 10:25 ` [PATCH v4 4/8] ARM: dts: stm32: Enable DMA2D on STM32F469-DISCO board dillon.minfei
2021-10-14 10:25 ` [PATCH v4 5/8] media: v4l2-mem2mem: add v4l2_m2m_get_unmapped_area for no-mmu platform dillon.minfei
2021-10-14 10:25 ` [PATCH v4 6/8] media: v4l2-ctrls: Add RGB color effects control dillon.minfei
2021-10-14 10:43 ` Hans Verkuil
2021-10-14 10:53 ` Dillon Min
2021-10-14 11:22 ` Hans Verkuil
2021-10-14 14:00 ` Dillon Min [this message]
2021-10-14 10:25 ` [PATCH v4 7/8] clk: stm32: Fix ltdc's clock turn off by clk_disable_unused() after system enter shell dillon.minfei
2021-10-14 10:25 ` [PATCH v4 8/8] media: stm32-dma2d: STM32 DMA2D driver dillon.minfei
2021-10-14 10:45 ` Hans Verkuil
2021-10-14 11:01 ` Dillon Min
2021-10-14 11:02 ` [PATCH v4 0/8] Add support for DMA2D of STMicroelectronics STM32 Soc series Hans Verkuil
2021-10-14 11:08 ` Dillon Min
2021-10-14 11:14 ` Hans Verkuil
2021-10-14 14:09 ` Dillon Min
2021-10-15 13:12 ` Dillon Min
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAL9mu0KLckxypYMc=mWRrXYOiwLeo98rNBWLwzA2gK9JJEHf1Q@mail.gmail.com' \
--to=dillon.minfei@gmail.com \
--cc=alexandre.torgue@foss.st.com \
--cc=devicetree@vger.kernel.org \
--cc=ezequiel@collabora.com \
--cc=gabriel.fernandez@foss.st.com \
--cc=gabriel.fernandez@st.com \
--cc=gnurou@gmail.com \
--cc=hugues.fruchet@foss.st.com \
--cc=hverkuil-cisco@xs4all.nl \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mchehab+huawei@kernel.org \
--cc=mchehab@kernel.org \
--cc=mcoquelin.stm32@gmail.com \
--cc=mturquette@baylibre.com \
--cc=patrice.chotard@foss.st.com \
--cc=pihsun@chromium.org \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).