Re: [REGRESSION] usb: gadget: f_fs: Allow scatter-gather buffers

[John Stultz <john.stultz@linaro.org>]

On Wed, May 8, 2019 at 5:44 AM Andrzej Pietrasiewicz
<andrzej.p@collabora.com> wrote:
> W dniu 08.05.2019 o 04:18, John Stultz pisze:
> > Andrzej: Do you have any ideas or suggestions on this? I'm happy to
> > test or run any debug patches, if it would help narrow the issue down.
> >
>
> Can you please try the below patch?
>
> One more thing to consider is "functionfs read size 512 > requested size 24,
> splitting request into multiple reads." in your original report, but let's
> try this first:
>
>  From f2b8f27cfa42cafe1f56d8abbe2c76fa0072e368 Mon Sep 17 00:00:00 2001
> From: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
> Date: Wed, 8 May 2019 13:52:40 +0200
> Subject: [PATCH] usb: gadget: Zero ffs_io_data
>
> In some cases the "Allocate & copy" block in ffs_epfile_io() is not
> executed. Consequently, in such a case ffs_alloc_buffer() is never called
> and struct ffs_io_data is not initialized properly. This in turn leads to
> problems when ffs_free_buffer() is called at the end of ffs_epfile_io().
>
> This patch uses kzalloc() instead of kmalloc() in the aio case and memset()
> in non-aio case to properly initialize struct ffs_io_data.
>
> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>

Hey Andrzej,
  Thanks so much for sending this patch out! I tried it, but on both
HiKey960 and Dragonboard 845c (both dwc3 hardware) I'm still seeing
the same problem with this change.

On db845c "adb logcat" will usually hang mid-way and just sit there.
Further adb shell connections don't connect until I unplug and replug
the usb cable.

On HiKey960 logcat seems to work, but doing something like adb install
<big application> will stall and never complete.

Again, in both cases I'm not getting much in the way of error
messages, so there's not much clue as to whats going wrong.

Let me know if you have any further ideas to try.

thanks
-john