From: Rob Herring <robh+dt@kernel.org> To: Luca Weiss <luca@z3ntu.xyz> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>, Mark Rutland <mark.rutland@arm.com>, Mauro Carvalho Chehab <mchehab+samsung@kernel.org>, Pascal PAILLET-LME <p.paillet@st.com>, Coly Li <colyli@suse.de>, Lee Jones <lee.jones@linaro.org>, Xiaotong Lu <xiaotong.lu@spreadtrum.com>, Brian Masney <masneyb@onstation.org>, Baolin Wang <baolin.wang@linaro.org>, David Brown <david.brown@linaro.org>, "open list:ARM/QUALCOMM SUPPORT" <linux-arm-msm@vger.kernel.org>, "open list:INPUT (KEYBOARD, MOUSE, JOYSTICK, TOUCHSCREEN)..." <linux-input@vger.kernel.org>, "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" <devicetree@vger.kernel.org>, open list <linux-kernel@vger.kernel.org> Subject: Re: [PATCH v4 1/3] dt-bindings: input: add GPIO controllable vibrator Date: Mon, 22 Apr 2019 08:13:29 -0500 Message-ID: <CAL_Jsq+EJpRFRzh-dmZAJUQ84iMm6rs=sNTYstpQJzsbSboUqg@mail.gmail.com> (raw) In-Reply-To: <20190420122333.23662-1-luca@z3ntu.xyz> On Sat, Apr 20, 2019 at 7:24 AM Luca Weiss <luca@z3ntu.xyz> wrote: > > Provide a simple driver for GPIO controllable vibrators. > It will be used by the Fairphone 2. > > Signed-off-by: Luca Weiss <luca@z3ntu.xyz> > --- > Changes from v3: > - Convert .txt based doc to the new yaml based format > > .../bindings/input/gpio-vibrator.yaml | 39 +++++++++++++++++++ > 1 file changed, 39 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/gpio-vibrator.yaml > > diff --git a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml > new file mode 100644 > index 000000000000..bca1b6ea07a4 > --- /dev/null > +++ b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml > @@ -0,0 +1,39 @@ > +# SPDX-License-Identifier: GPL-2.0 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/bindings/input/gpio-vibrator.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: GPIO vibrator > + > +maintainers: > + - Luca Weiss <luca@z3ntu.xyz> > + > +description: |+ > + Registers a GPIO device as vibrator, where the on/off capability is controlled by a GPIO. > + > +properties: > + compatible: > + items: > + - const: gpio-vibrator These 2 lines can be simplified to just 'const: gpio-vibrator'. > + > + enable-gpios: > + maxItems: 1 > + > + vcc-supply: > + $ref: /schemas/types.yaml#/definitions/phandle This isn't necessary as we can do this for every occurrence of '*-supply'. I'll add that to the core schema. With those 2 changes: Reviewed-by: Rob Herring <robh@kernel.org> > + description: Regulator that provides power > + > +required: > + - compatible > + - enable-gpios > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + > + vibrator { > + compatible = "gpio-vibrator"; > + enable-gpios = <&msmgpio 86 GPIO_ACTIVE_HIGH>; > + vcc-supply = <&pm8941_l18>; > + }; > -- > 2.21.0 >
prev parent reply index Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-04-20 12:23 Luca Weiss 2019-04-20 12:23 ` [PATCH v4 2/3] Input: add a driver for GPIO controllable vibrators Luca Weiss 2019-04-20 12:23 ` [PATCH v4 3/3] ARM: dts: msm8974-FP2: Add vibration motor Luca Weiss 2019-04-22 13:13 ` Rob Herring [this message]
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to='CAL_Jsq+EJpRFRzh-dmZAJUQ84iMm6rs=sNTYstpQJzsbSboUqg@mail.gmail.com' \ --to=robh+dt@kernel.org \ --cc=baolin.wang@linaro.org \ --cc=colyli@suse.de \ --cc=david.brown@linaro.org \ --cc=devicetree@vger.kernel.org \ --cc=dmitry.torokhov@gmail.com \ --cc=lee.jones@linaro.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-input@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=luca@z3ntu.xyz \ --cc=mark.rutland@arm.com \ --cc=masneyb@onstation.org \ --cc=mchehab+samsung@kernel.org \ --cc=p.paillet@st.com \ --cc=xiaotong.lu@spreadtrum.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
LKML Archive on lore.kernel.org Archives are clonable: git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \ linux-kernel@vger.kernel.org public-inbox-index lkml Example config snippet for mirrors Newsgroup available over NNTP: nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel AGPL code for this site: git clone https://public-inbox.org/public-inbox.git