From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754028AbaJUBhB (ORCPT ); Mon, 20 Oct 2014 21:37:01 -0400 Received: from mail-la0-f41.google.com ([209.85.215.41]:48252 "EHLO mail-la0-f41.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751490AbaJUBg7 (ORCPT ); Mon, 20 Oct 2014 21:36:59 -0400 MIME-Version: 1.0 In-Reply-To: <1413839635-20519-1-git-send-email-mathieu.poirier@linaro.org> References: <1413839635-20519-1-git-send-email-mathieu.poirier@linaro.org> From: Rob Herring Date: Tue, 21 Oct 2014 09:36:37 +0800 Message-ID: Subject: Re: [PATCH v8] coresight: bindings for coresight drivers To: Mathieu Poirier Cc: Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , "devicetree@vger.kernel.org" , "linux-kernel@vger.kernel.org" Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Tue, Oct 21, 2014 at 5:13 AM, wrote: > From: Mathieu Poirier > > Coresight IP blocks allow for the support of HW assisted tracing > on ARM SoCs. Bindings for the currently available blocks are > presented herein. > > Signed-off-by: Pratik Patel > Signed-off-by: Mathieu Poirier Didn't I give you a reviewed-by on this already? Rob > --- > .../devicetree/bindings/arm/coresight.txt | 203 +++++++++++++++++++++ > 1 file changed, 203 insertions(+) > create mode 100644 Documentation/devicetree/bindings/arm/coresight.txt > > diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt > new file mode 100644 > index 0000000..96dd947 > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/coresight.txt > @@ -0,0 +1,203 @@ > +* CoreSight Components: > + > +CoreSight components are compliant with the ARM CoreSight architecture > +specification and can be connected in various topologies to suit a particular > +SoCs tracing needs. These trace components can generally be classified as sinks, > +links and sources. Trace data produced by one or more sources flows through the > +intermediate links connecting the source to the currently selected sink. Each > +CoreSight component device should use these properties to describe its hardware > +characteristcs. > + > +* Required properties for all components *except* non-configurable replicators: > + > + * compatible: These have to be supplemented with "arm,primecell" as > + drivers are using the AMBA bus interface. Possible values include: > + - "arm,coresight-etb10", "arm,primecell"; > + - "arm,coresight-tpiu", "arm,primecell"; > + - "arm,coresight-tmc", "arm,primecell"; > + - "arm,coresight-funnel", "arm,primecell"; > + - "arm,coresight-etm3x", "arm,primecell"; > + > + * reg: physical base address and length of the register > + set(s) of the component. > + > + * clocks: the clock associated to this component. > + > + * clock-names: the name of the clock as referenced by the code. > + Since we are using the AMBA framework, the name should be > + "apb_pclk". > + > + * port or ports: The representation of the component's port > + layout using the generic DT graph presentation found in > + "bindings/graph.txt". > + > +* Required properties for devices that don't show up on the AMBA bus, such as > + non-configurable replicators: > + > + * compatible: Currently supported value is (note the absence of the > + AMBA markee): > + - "arm,coresight-replicator" > + > + * id: a unique number that will identify this replicator. > + > + * port or ports: same as above. > + > +* Optional properties for ETM/PTMs: > + > + * arm,cp14: must be present if the system accesses ETM/PTM management registers > + via co-processor 14. > + > + * cpu: the cpu phandle this ETM/PTM is affined to. When omitted the source is > + considered to belong to CPU0. > + > +* Optional property for TMC: > + > + * arm,buffer-size: size of contiguous buffer space for TMC ETR > + (embedded trace router) > + > + > +Example: > + > +1. Sinks > + etb@0,20010000 { > + compatible = "arm,coresight-etb10", "arm,primecell"; > + reg = <0 0x20010000 0 0x1000>; > + > + coresight-default-sink; > + clocks = <&oscclk6a>; > + clock-names = "apb_pclk"; > + port { > + etb_in_port: endpoint@0 { > + slave-mode; > + remote-endpoint = <&replicator_out_port0>; > + }; > + }; > + }; > + > + tpiu@0,20030000 { > + compatible = "arm,coresight-tpiu", "arm,primecell"; > + reg = <0 0x20030000 0 0x1000>; > + > + clocks = <&oscclk6a>; > + clock-names = "apb_pclk"; > + port { > + tpiu_in_port: endpoint@0 { > + slave-mode; > + remote-endpoint = <&replicator_out_port1>; > + }; > + }; > + }; > + > +2. Links > + replicator { > + /* non-configurable replicators don't show up on the > + * AMBA bus. As such no need to add "arm,primecell". > + */ > + compatible = "arm,coresight-replicator"; > + /* this will show up in debugfs as "0.replicator" */ > + id = <0>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + /* replicator output ports */ > + port@0 { > + reg = <0>; > + replicator_out_port0: endpoint { > + remote-endpoint = <&etb_in_port>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + replicator_out_port1: endpoint { > + remote-endpoint = <&tpiu_in_port>; > + }; > + }; > + > + /* replicator input port */ > + port@2 { > + reg = <0>; > + replicator_in_port0: endpoint { > + slave-mode; > + remote-endpoint = <&funnel_out_port0>; > + }; > + }; > + }; > + }; > + > + funnel@0,20040000 { > + compatible = "arm,coresight-funnel", "arm,primecell"; > + reg = <0 0x20040000 0 0x1000>; > + > + clocks = <&oscclk6a>; > + clock-names = "apb_pclk"; > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + /* funnel output port */ > + port@0 { > + reg = <0>; > + funnel_out_port0: endpoint { > + remote-endpoint = <&replicator_in_port0>; > + }; > + }; > + > + /* funnel input ports */ > + port@1 { > + reg = <0>; > + funnel_in_port0: endpoint { > + slave-mode; > + remote-endpoint = <&ptm0_out_port>; > + }; > + }; > + > + port@2 { > + reg = <1>; > + funnel_in_port1: endpoint { > + slave-mode; > + remote-endpoint = <&ptm1_out_port>; > + }; > + }; > + > + port@3 { > + reg = <2>; > + funnel_in_port2: endpoint { > + slave-mode; > + remote-endpoint = <&etm0_out_port>; > + }; > + }; > + > + }; > + }; > + > +3. Sources > + ptm@0,2201c000 { > + compatible = "arm,coresight-etm3x", "arm,primecell"; > + reg = <0 0x2201c000 0 0x1000>; > + > + cpu = <&cpu0>; > + clocks = <&oscclk6a>; > + clock-names = "apb_pclk"; > + port { > + ptm0_out_port: endpoint { > + remote-endpoint = <&funnel_in_port0>; > + }; > + }; > + }; > + > + ptm@0,2201d000 { > + compatible = "arm,coresight-etm3x", "arm,primecell"; > + reg = <0 0x2201d000 0 0x1000>; > + > + cpu = <&cpu1>; > + clocks = <&oscclk6a>; > + clock-names = "apb_pclk"; > + port { > + ptm1_out_port: endpoint { > + remote-endpoint = <&funnel_in_port1>; > + }; > + }; > + }; > -- > 1.9.1 >