From: Rob Herring <email@example.com> To: Alex Elder <firstname.lastname@example.org> Cc: Alex Elder <email@example.com>, Bjorn Andersson <firstname.lastname@example.org>, "Gross, Andy" <email@example.com>, David Miller <firstname.lastname@example.org>, Jakub Kicinski <email@example.com>, Evan Green <firstname.lastname@example.org>, email@example.com, firstname.lastname@example.org, Alex Elder <email@example.com>, linux-arm-msm <firstname.lastname@example.org>, netdev <email@example.com>, firstname.lastname@example.org, "email@example.com" <firstname.lastname@example.org> Subject: Re: [PATCH net-next 1/3] dt-bindings: net: qcom,ipa: make imem interconnect optional Date: Tue, 3 Aug 2021 12:05:46 -0600 [thread overview] Message-ID: <CAL_Jsq+fzCJ-S3vkwSYJ_7rmRqO2SdQcf0c-_aUyUNYKA1CwPQ@mail.gmail.com> (raw) In-Reply-To: <email@example.com> On Tue, Aug 3, 2021 at 6:24 AM Alex Elder <firstname.lastname@example.org> wrote: > > On 7/28/21 10:33 AM, Rob Herring wrote: > > On Mon, Jul 26, 2021 at 9:59 AM Alex Elder <email@example.com> wrote: > >> > >> On 7/23/21 3:52 PM, Rob Herring wrote: > >>> On Mon, Jul 19, 2021 at 04:24:54PM -0500, Alex Elder wrote: > >>>> On some newer SoCs, the interconnect between IPA and SoC internal > >>>> memory (imem) is not used. Reflect this in the binding by moving > >>>> the definition of the "imem" interconnect to the end and defining > >>>> minItems to be 2 for both the interconnects and interconnect-names > >>>> properties. > >>>> > >>>> Signed-off-by: Alex Elder <firstname.lastname@example.org> > >>>> --- > >>>> .../devicetree/bindings/net/qcom,ipa.yaml | 18 ++++++++++-------- > >>>> 1 file changed, 10 insertions(+), 8 deletions(-) > >>>> > >>>> diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml > >>>> index ed88ba4b94df5..4853ab7017bd9 100644 > >>>> --- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml > >>>> +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml > >>>> @@ -87,16 +87,18 @@ properties: > >>>> - const: ipa-setup-ready > >>>> > >>>> interconnects: > >>>> + minItems: 2 > >>>> items: > >>>> - - description: Interconnect path between IPA and main memory > >>>> - - description: Interconnect path between IPA and internal memory > >>>> - - description: Interconnect path between IPA and the AP subsystem > >>>> + - description: Path leading to system memory > >>>> + - description: Path between the AP and IPA config space > >>>> + - description: Path leading to internal memory > >>>> > >>>> interconnect-names: > >>>> + minItems: 2 > >>>> items: > >>>> - const: memory > >>>> - - const: imem > >>>> - const: config > >>>> + - const: imem > >>> > >>> What about existing users? This will generate warnings. Doing this for > >>> the 2nd item would avoid the need for .dts updates: > >>> > >>> - enum: [ imem, config ] > > In other words: > > interconnect-names: > minItems: 2 > items: > - const: memory > - enum: [ imem, config ] > - const: imem > > What do I do with the "interconnects" descriptions in that case? > How do I make the "interconnect-names" specified this way align > with the described interconnect values? Is that necessary? The schema will only ever check or care that there are 2 or 3 entries. You can put whatever you want for the description. Or use 'oneOf' to have the 2 entry and 3 entry cases. > >> If I understand correctly, the effect of this would be that > >> the second item can either be "imem" or "config", and the third > >> (if present) could only be "imem"? > > > > Yes for the 2nd, but the 3rd item could only be 'config'. > > Sorry, yes, that's what I meant. I might have misread the > diff output. > > >> And you're saying that otherwise, existing users (the only > >> one it applies to at the moment is "sdm845.dtsi") would > >> produce warnings, because the interconnects are listed > >> in an order different from what the binding specifies. > >> > >> Is that correct? > > > > Yes. > > > >> If so, what you propose suggests "imem" could be listed twice. > >> It doesn't make sense, and maybe it's precluded in other ways > >> so that's OK. > > > > Good observation. There are generic checks that the strings are unique. > > I think I don't like that quite as much, because that > "no duplicates" rule is implied. It also avoids any > confusion in the "respectively" relationship between > interconnects and interconnect-names. We could be verbose about it using the 'uniqueItems' keyword, but I try to make the bindings follow the common case (for DT) rather than the default for json-schema. If you think about the purpose of '*-names', non-unique entries would never make sense as the purpose is to identify what each entry is. > I understand what you're suggesting though, and I would > be happy to update the binding in the way you suggest. > I'd like to hear what you say about my questions above > before doing so. > > >> But I'd be happy to update "sdm845.dtsi" to > >> address your concern. (Maybe that's something you would rather > >> avoid?) > > > > Better to not change DT if you don't have to. You're probably okay if > > all clients (consumers of the dtb) used names and didn't care about > > In the IPA driver, wherever names are specified for things in DT, > names (only) are used to look them up. So I'm "probably okay." Yes, probably so. It's ultimately up to you and the Qcom maintainers what to do. I'm just providing how you could avoid the change. Rob
next prev parent reply other threads:[~2021-08-03 18:06 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-07-19 21:24 [PATCH net-next 0/3] arm64: dts: qcom: DTS updates Alex Elder 2021-07-19 21:24 ` [PATCH net-next 1/3] dt-bindings: net: qcom,ipa: make imem interconnect optional Alex Elder 2021-07-23 20:52 ` Rob Herring 2021-07-26 15:59 ` Alex Elder 2021-07-28 15:33 ` Rob Herring 2021-08-03 12:24 ` Alex Elder 2021-08-03 18:05 ` Rob Herring [this message] 2021-07-19 21:24 ` [PATCH net-next 2/3] arm64: dts: qcom: sc7280: add IPA information Alex Elder 2021-07-19 21:24 ` [PATCH net-next 3/3] arm64: dts: qcom: sc7180: define ipa_fw_mem node Alex Elder 2021-07-20 14:20 ` [PATCH net-next 0/3] arm64: dts: qcom: DTS updates patchwork-bot+netdevbpf 2021-07-20 15:59 ` Bjorn Andersson 2021-07-26 15:44 ` Alex Elder
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=CAL_Jsq+fzCJ-S3vkwSYJ_7rmRqO2SdQcf0c-_aUyUNYKA1CwPQ@mail.gmail.com \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --subject='Re: [PATCH net-next 1/3] dt-bindings: net: qcom,ipa: make imem interconnect optional' \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).