From: Rob Herring <robh@kernel.org>
To: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Cc: Jingoo Han <jingoohan1@gmail.com>,
Gustavo Pimentel <gustavo.pimentel@synopsys.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Ard Biesheuvel <ardb@kernel.org>, PCI <linux-pci@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Niklas Cassel <nks@flawful.org>
Subject: Re: [PATCH v3 2/2] PCI: dwc: Use an address in the driver data for MSI address
Date: Fri, 25 Sep 2020 09:33:54 -0600 [thread overview]
Message-ID: <CAL_JsqK6QURYdt-0mbuv6oeoqFr0acVh6Q7F2-FSXN-zOk34XA@mail.gmail.com> (raw)
In-Reply-To: <20200925163852.051e3da2@xhacker.debian>
+Niklas
On Fri, Sep 25, 2020 at 2:39 AM Jisheng Zhang
<Jisheng.Zhang@synaptics.com> wrote:
>
> There's no need to allocate a page for the MSI address, we could use
> an address in the driver data.
>
> One side effect of this patch is fixing the MSI page leakage during
> suspend/resume. Take the pcie-tegra194.c for example, it calls
> dw_pcie_msi_init() in resume path, thus the previous MSI page is
> leaked.
>
> Fixes: 56e15a238d92 ("PCI: tegra: Add Tegra194 PCIe support")
> Suggested-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
> ---
> .../pci/controller/dwc/pcie-designware-host.c | 22 ++-----------------
> drivers/pci/controller/dwc/pcie-designware.h | 1 -
> 2 files changed, 2 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
> index f08f4d97f321..bf25d783b5c5 100644
> --- a/drivers/pci/controller/dwc/pcie-designware-host.c
> +++ b/drivers/pci/controller/dwc/pcie-designware-host.c
> @@ -126,9 +126,7 @@ static void dw_pci_setup_msi_msg(struct irq_data *d, struct msi_msg *msg)
> {
> struct pcie_port *pp = irq_data_get_irq_chip_data(d);
> struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> - u64 msi_target;
> -
> - msi_target = (u64)pp->msi_data;
> + u64 msi_target = virt_to_phys(&pp->msi_data);
>
> msg->address_lo = lower_32_bits(msi_target);
> msg->address_hi = upper_32_bits(msi_target);
> @@ -287,27 +285,11 @@ void dw_pcie_free_msi(struct pcie_port *pp)
>
> irq_domain_remove(pp->msi_domain);
> irq_domain_remove(pp->irq_domain);
> -
> - if (pp->msi_page)
> - __free_page(pp->msi_page);
> }
>
> void dw_pcie_msi_init(struct pcie_port *pp)
> {
> - struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> - struct device *dev = pci->dev;
> - u64 msi_target;
> -
> - pp->msi_page = alloc_page(GFP_KERNEL);
> - pp->msi_data = dma_map_page(dev, pp->msi_page, 0, PAGE_SIZE,
> - DMA_FROM_DEVICE);
> - if (dma_mapping_error(dev, pp->msi_data)) {
> - dev_err(dev, "Failed to map MSI data\n");
> - __free_page(pp->msi_page);
> - pp->msi_page = NULL;
> - return;
> - }
> - msi_target = (u64)pp->msi_data;
> + u64 msi_target = virt_to_phys(&pp->msi_data);
>
> /* Program the msi_data */
> dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_LO, 4,
> diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> index f911760dcc69..a88e15a09745 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.h
> +++ b/drivers/pci/controller/dwc/pcie-designware.h
> @@ -195,7 +195,6 @@ struct pcie_port {
> struct irq_domain *irq_domain;
> struct irq_domain *msi_domain;
> dma_addr_t msi_data;
You should probably change the type here. u16 I guess since that's the
MSI data size.
With that,
Reviewed-by: Rob Herring <robh@kernel.org>
Would be nice to hear from others that have touched this code as with
Fixes it's going to get backported.
Rob
> - struct page *msi_page;
> struct irq_chip *msi_irq_chip;
> u32 num_vectors;
> u32 irq_mask[MAX_MSI_CTRLS];
> --
> 2.28.0
>
next prev parent reply other threads:[~2020-09-25 15:34 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-25 8:34 [PATCH v3 0/2] PCI: dwc: fix two MSI issues Jisheng Zhang
2020-09-25 8:37 ` [PATCH v3 1/2] PCI: dwc: Skip PCIE_MSI_INTR0* programming if MSI is disabled Jisheng Zhang
2020-09-25 15:50 ` Rob Herring
2020-09-25 8:38 ` [PATCH v3 2/2] PCI: dwc: Use an address in the driver data for MSI address Jisheng Zhang
2020-09-25 15:33 ` Rob Herring [this message]
2020-09-27 9:23 ` Jisheng Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAL_JsqK6QURYdt-0mbuv6oeoqFr0acVh6Q7F2-FSXN-zOk34XA@mail.gmail.com \
--to=robh@kernel.org \
--cc=Jisheng.Zhang@synaptics.com \
--cc=ardb@kernel.org \
--cc=bhelgaas@google.com \
--cc=gustavo.pimentel@synopsys.com \
--cc=jingoohan1@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=nks@flawful.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).