LKML Archive on lore.kernel.org
 help / Atom feed
From: Yixun Lan <yixun.lan@gmail.com>
To: Maxime Jourdan <maxi.jourdan@wanadoo.fr>
Cc: Kevin Hilman <khilman@baylibre.com>,
	linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Neil Armstrong <narmstrong@baylibre.com>
Subject: Re: [PATCH 1/4] soc: amlogic: add meson-canvas driver
Date: Fri, 3 Aug 2018 22:14:19 +0800
Message-ID: <CALecT5i1mnkvi4WuL701cA+UnRL9CKmj=CMqLEWN=fpbxfi7ZQ@mail.gmail.com> (raw)
In-Reply-To: <20180801185128.23440-2-maxi.jourdan@wanadoo.fr>

HI Maxime

thanks for contributing the patches ;-)

On Thu, Aug 2, 2018 at 2:51 AM, Maxime Jourdan <maxi.jourdan@wanadoo.fr> wrote:
> Amlogic SoCs have a repository of 256 canvas which they use to
> describe pixel buffers.
>
> They contain metadata like width, height, block mode, endianness [..]
>
> Many IPs within those SoCs like vdec/vpu rely on those canvas to read/write
> pixels.
>
> Signed-off-by: Maxime Jourdan <maxi.jourdan@wanadoo.fr>
> ---
>  drivers/soc/amlogic/Kconfig              |   7 +
>  drivers/soc/amlogic/Makefile             |   1 +
>  drivers/soc/amlogic/meson-canvas.c       | 182 +++++++++++++++++++++++
>  include/linux/soc/amlogic/meson-canvas.h |  37 +++++
>  4 files changed, 227 insertions(+)
>  create mode 100644 drivers/soc/amlogic/meson-canvas.c
>  create mode 100644 include/linux/soc/amlogic/meson-canvas.h
>
> diff --git a/drivers/soc/amlogic/Kconfig b/drivers/soc/amlogic/Kconfig
> index b04f6e4aedbc..5bd049899d88 100644
> --- a/drivers/soc/amlogic/Kconfig
> +++ b/drivers/soc/amlogic/Kconfig
> @@ -1,5 +1,12 @@
>  menu "Amlogic SoC drivers"
>
> +config MESON_CANVAS
> +       bool "Amlogic Meson Canvas driver"
shouldn't this a 'tristate'? since you'd make the driver a kernel module..

> +       depends on ARCH_MESON || COMPILE_TEST
> +       default ARCH_MESON
> +       help
> +         Say yes to support the canvas IP within Amlogic Meson Soc family.
> +
>  config MESON_GX_SOCINFO
>         bool "Amlogic Meson GX SoC Information driver"
>         depends on ARCH_MESON || COMPILE_TEST
> diff --git a/drivers/soc/amlogic/Makefile b/drivers/soc/amlogic/Makefile
> index 8fa321893928..0ab16d35ac36 100644
> --- a/drivers/soc/amlogic/Makefile
> +++ b/drivers/soc/amlogic/Makefile
> @@ -1,3 +1,4 @@
> +obj-$(CONFIG_MESON_CANVAS) += meson-canvas.o
>  obj-$(CONFIG_MESON_GX_SOCINFO) += meson-gx-socinfo.o
>  obj-$(CONFIG_MESON_GX_PM_DOMAINS) += meson-gx-pwrc-vpu.o
>  obj-$(CONFIG_MESON_MX_SOCINFO) += meson-mx-socinfo.o
> diff --git a/drivers/soc/amlogic/meson-canvas.c b/drivers/soc/amlogic/meson-canvas.c
> new file mode 100644
> index 000000000000..671eb89c8904
> --- /dev/null
> +++ b/drivers/soc/amlogic/meson-canvas.c
> @@ -0,0 +1,182 @@
> +/*
> + * Copyright (C) 2018 Maxime Jourdan
> + * Copyright (C) 2016 BayLibre, SAS
> + * Author: Neil Armstrong <narmstrong@baylibre.com>
> + * Copyright (C) 2015 Amlogic, Inc. All rights reserved.
> + * Copyright (C) 2014 Endless Mobile
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, see <http://www.gnu.org/licenses/>.
> + */
use SPDX license header as Neil already mentioned
check doc: Documentation/process/license-rules.rst

> +
> +#include <linux/of_address.h>
> +#include <linux/platform_device.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/soc/amlogic/meson-canvas.h>
> +#include <asm/io.h>
> +
> +#define NUM_CANVAS 256
> +
> +/* DMC Registers */
> +#define DMC_CAV_LUT_DATAL      0x48 /* 0x12 offset in data sheet */
> +       #define CANVAS_WIDTH_LBIT       29
> +       #define CANVAS_WIDTH_LWID       3
> +#define DMC_CAV_LUT_DATAH      0x4c /* 0x13 offset in data sheet */
> +       #define CANVAS_WIDTH_HBIT       0
> +       #define CANVAS_HEIGHT_BIT       9
> +       #define CANVAS_BLKMODE_BIT      24
> +#define DMC_CAV_LUT_ADDR       0x50 /* 0x14 offset in data sheet */
> +       #define CANVAS_LUT_WR_EN        (0x2 << 8)
> +       #define CANVAS_LUT_RD_EN        (0x1 << 8)
> +
> +struct meson_canvas {
> +       struct device *dev;
> +       struct regmap *regmap_dmc;
> +       struct mutex lock;
> +       u8 used[NUM_CANVAS];
> +};
> +
> +static struct meson_canvas canvas = { 0 };
> +
> +static int meson_canvas_setup(uint8_t canvas_index, uint32_t addr,
> +                       uint32_t stride, uint32_t height,
> +                       unsigned int wrap,
> +                       unsigned int blkmode,
> +                       unsigned int endian)
use "./scripts/checkpatch.pl --strict" to check
you will get a few complaints..

> +{
> +       struct regmap *regmap = canvas.regmap_dmc;
> +       u32 val;
> +
> +       mutex_lock(&canvas.lock);
> +
> +       if (!canvas.used[canvas_index]) {
> +               dev_err(canvas.dev,
> +                       "Trying to setup non allocated canvas %u\n",
> +                       canvas_index);
> +               mutex_unlock(&canvas.lock);
> +               return -EINVAL;
> +       }
> +
> +       regmap_write(regmap, DMC_CAV_LUT_DATAL,
> +               ((addr + 7) >> 3) |
> +               (((stride + 7) >> 3) << CANVAS_WIDTH_LBIT));
> +
> +       regmap_write(regmap, DMC_CAV_LUT_DATAH,
> +               ((((stride + 7) >> 3) >> CANVAS_WIDTH_LWID) <<
> +                                               CANVAS_WIDTH_HBIT) |
> +               (height << CANVAS_HEIGHT_BIT) |
> +               (wrap << 22) |
> +               (blkmode << CANVAS_BLKMODE_BIT) |
> +               (endian << 26));
> +
> +       regmap_write(regmap, DMC_CAV_LUT_ADDR,
> +               CANVAS_LUT_WR_EN | canvas_index);
> +
> +       /* Force a read-back to make sure everything is flushed. */
> +       regmap_read(regmap, DMC_CAV_LUT_DATAH, &val);
> +       mutex_unlock(&canvas.lock);
> +
> +       return 0;
> +}
> +
> +static int meson_canvas_alloc(uint8_t *canvas_index)
> +{
> +       int i;
> +
> +       mutex_lock(&canvas.lock);
> +       for (i = 0; i < NUM_CANVAS; ++i) {
> +               if (!canvas.used[i]) {
> +                       canvas.used[i] = 1;
> +                       mutex_unlock(&canvas.lock);
> +                       *canvas_index = i;
> +                       return 0;
> +               }
> +       }
> +       mutex_unlock(&canvas.lock);
> +       dev_err(canvas.dev, "No more canvas available\n");
> +
> +       return -ENODEV;
> +}
> +
> +static int meson_canvas_free(uint8_t canvas_index)
> +{
> +       mutex_lock(&canvas.lock);
> +       if (!canvas.used[canvas_index]) {
> +               dev_err(canvas.dev,
> +                       "Trying to free unused canvas %u\n", canvas_index);
> +               mutex_unlock(&canvas.lock);
> +               return -EINVAL;
> +       }
> +       canvas.used[canvas_index] = 0;
> +       mutex_unlock(&canvas.lock);
> +
> +       return 0;
> +}
> +
> +static struct meson_canvas_platform_data canvas_platform_data = {
> +       .alloc = meson_canvas_alloc,
> +       .free = meson_canvas_free,
> +       .setup = meson_canvas_setup,
> +};
> +
> +static int meson_canvas_probe(struct platform_device *pdev)
> +{
> +       struct regmap *regmap_dmc;
> +       struct device *dev;
> +
> +       dev = &pdev->dev;
you could fold into one if you like(may save a few lines), so something like:

struct device *dev = &pdev->dev;

> +
> +       regmap_dmc = syscon_node_to_regmap(of_get_parent(dev->of_node));
> +       if (IS_ERR(regmap_dmc)) {
> +               dev_err(&pdev->dev, "failed to get DMC regmap\n");
> +               return PTR_ERR(regmap_dmc);
> +       }
> +
> +       canvas.dev = dev;
> +       canvas.regmap_dmc = regmap_dmc;
> +       mutex_init(&canvas.lock);
> +
> +       dev->platform_data = &canvas_platform_data;
> +
> +       return 0;
> +}
> +
> +static int meson_canvas_remove(struct platform_device *pdev)
> +{
> +       mutex_destroy(&canvas.lock);
> +       return 0;
> +}
> +
> +static const struct of_device_id canvas_dt_match[] = {
> +       { .compatible = "amlogic,meson-canvas" },
drop "meson-" prefix, already comment in another thread

> +       {}
> +};
> +MODULE_DEVICE_TABLE(of, canvas_dt_match);
> +
> +static struct platform_driver meson_canvas_driver = {
> +       .probe = meson_canvas_probe,
> +       .remove = meson_canvas_remove,
> +       .driver = {
> +               .name = "meson-canvas",
> +               .of_match_table = canvas_dt_match,
> +       },
> +};
> +module_platform_driver(meson_canvas_driver);
> +
> +MODULE_ALIAS("platform:meson-canvas");
> +MODULE_DESCRIPTION("AMLogic Meson Canvas driver");
Jerome complained several times about the camel expression,
so just use "Amlogic" ;-)

> +MODULE_AUTHOR("Maxime Jourdan <maxi.jourdan@wanadoo.fr>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/soc/amlogic/meson-canvas.h b/include/linux/soc/amlogic/meson-canvas.h
> new file mode 100644
> index 000000000000..af9e2415056a
> --- /dev/null
> +++ b/include/linux/soc/amlogic/meson-canvas.h
> @@ -0,0 +1,37 @@
> +/*
> + * Copyright (c) 2018 Maxime Jourdan
> + * Author: Maxime Jourdan <maxi.jourdan@wanadoo.fr>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +#ifndef MESON_CANVAS_H
> +#define MESON_CANVAS_H
> +
> +#include <linux/kernel.h>
> +
> +#define MESON_CANVAS_WRAP_NONE 0x00
> +#define MESON_CANVAS_WRAP_X    0x01
> +#define MESON_CANVAS_WRAP_Y    0x02
> +
> +#define MESON_CANVAS_BLKMODE_LINEAR    0x00
> +#define MESON_CANVAS_BLKMODE_32x32     0x01
> +#define MESON_CANVAS_BLKMODE_64x64     0x02
> +
> +struct meson_canvas_platform_data {
> +       int (*alloc)(uint8_t *canvas_index);
> +       int (*free) (uint8_t canvas_index);
> +       int (*setup)(uint8_t canvas_index, uint32_t addr,
> +                       uint32_t stride, uint32_t height,
> +                       unsigned int wrap,
> +                       unsigned int blkmode,
> +                       unsigned int endian);
> +};
> +
> +#endif
> --
> 2.17.1
>
>
> _______________________________________________
> linux-amlogic mailing list
> linux-amlogic@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-amlogic

  parent reply index

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-01 18:51 [PATCH 0/4] " Maxime Jourdan
2018-08-01 18:51 ` [PATCH 1/4] " Maxime Jourdan
2018-08-02  8:38   ` Neil Armstrong
2018-08-02  8:52   ` Neil Armstrong
2018-08-02 13:14     ` Maxime Jourdan
2018-08-03 14:14   ` Yixun Lan [this message]
2018-08-03 21:47     ` Maxime Jourdan
2018-08-01 18:51 ` [PATCH 2/4] dt-bindings: soc: amlogic: add meson-canvas documentation Maxime Jourdan
2018-08-01 18:51 ` [PATCH 3/4] ARM64: dts: meson-gx: add dmcbus and canvas nodes Maxime Jourdan
2018-08-03 13:50   ` Yixun Lan
2018-08-04 20:02     ` Maxime Jourdan
2018-08-07  1:29       ` Yixun Lan
2018-08-01 18:51 ` [PATCH 4/4] drm/meson: convert to the new canvas module Maxime Jourdan
2018-08-02  8:39   ` Jerome Brunet
2018-08-02 12:34     ` Maxime Jourdan
2018-08-02 13:01       ` Jerome Brunet
2018-08-02 13:09         ` Maxime Jourdan
     [not found]   ` <5b6cc316.1c69fb81.682d3.1216@mx.google.com>
2018-08-10  6:35     ` Maxime Jourdan
2018-08-10  7:49       ` Neil Armstrong

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CALecT5i1mnkvi4WuL701cA+UnRL9CKmj=CMqLEWN=fpbxfi7ZQ@mail.gmail.com' \
    --to=yixun.lan@gmail.com \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maxi.jourdan@wanadoo.fr \
    --cc=narmstrong@baylibre.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org linux-kernel@archiver.kernel.org
	public-inbox-index lkml


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox