+ Jon,

On Sat, Aug 25, 2012 at 5:14 PM, NeilBrown <neilb@suse.de> wrote:
>
>
>
> Current kernel will wake from suspend on an event on any active
> GPIO even if enable_irq_wake() wasn't called.
>
> There are two reasons that the hardware wake-enable bit should be set:
>
> 1/ while non-suspended the CPU might go into a deep sleep (off_mode)
>   in which the wake-enable bit is needed for an interrupt to be
>   recognised.
> 2/ while suspended the GPIO interrupt should wake from suspend if and
>    only if irq_wake as been enabled.
>
> The code currently doesn't keep these two reasons separate so they get
> confused and sometimes the wakeup flags is set incorrectly.
>
> This patch reverts:
>  commit 9c4ed9e6c01e7a8bd9079da8267e1f03cb4761fc
>     gpio/omap: remove suspend/resume callbacks
> and
>  commit 0aa2727399c0b78225021413022c164cb99fbc5e
>     gpio/omap: remove suspend_wakeup field from struct gpio_bank
>
> and makes some minor changes so that we have separate flags for "GPIO
> should wake from deep idle" and "GPIO should wake from suspend".
>
> With this patch, the GPIO from my touch screen doesn't wake my device
> any more, which is what I want.
>
> Cc: Kevin Hilman <khilman@ti.com>
> Cc: Tony Lindgren <tony@atomide.com>
> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
> Cc: Cousson, Benoit <b-cousson@ti.com>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Cc: Tarun Kanti DebBarma <tarun.kanti@ti.com>
> Cc: Felipe Balbi <balbi@ti.com>
> Cc: Govindraj.R <govindraj.raja@ti.com>
>
> Signed-off-by: NeilBrown <neilb@suse.de>
>
The patch doesn't seems to be correct. At least the 2/ gets
fixed with a proper IRQCHIP flag. Can you try the patch at
end of the email and see if it helps ? Am attaching it in case
mailer damages it.

Regards
Santosh

>From b8a38fc75e046f6462610e26c47c620cad850c24 Mon Sep 17 00:00:00 2001
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Sun, 26 Aug 2012 09:39:51 +0530
Subject: [PATCH] gpio: omap: Set IRQCHIP_MASK_ON_SUSPEND to mask all
 non-wakeup gpio wakeups.

Set the irq chip flag IRQCHIP_MASK_ON_SUSPEND to cause the irq pm code
to mask all non-wake gpios in suspend, which will ensure the wakeup enable
bit is not set on non-wake gpios.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
---
 drivers/gpio/gpio-omap.c |    1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index e6efd77..50b4c18 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -779,6 +779,7 @@ static struct irq_chip gpio_irq_chip = {
 	.irq_unmask	= gpio_unmask_irq,
 	.irq_set_type	= gpio_irq_type,
 	.irq_set_wake	= gpio_wake_enable,
+	.flags		= IRQCHIP_MASK_ON_SUSPEND;
 };

 /*---------------------------------------------------------------------*/
-- 
1.7.9.5