linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] MIPS: Do not define pci_remap_iospace() under MACH_LOONGSON64
@ 2021-11-17  9:03 Tiezhu Yang
  2021-12-07 17:06 ` Thomas Bogendoerfer
  0 siblings, 1 reply; 5+ messages in thread
From: Tiezhu Yang @ 2021-11-17  9:03 UTC (permalink / raw)
  To: Thomas Bogendoerfer; +Cc: Xuefeng Li, linux-mips, linux-kernel

After commit 9f76779f2418 ("MIPS: implement architecture-specific
'pci_remap_iospace()'"), there exists the following warning on the
Loongson64 platform:

    loongson-pci 1a000000.pci:       IO 0x0018020000..0x001803ffff -> 0x0000020000
    loongson-pci 1a000000.pci:      MEM 0x0040000000..0x007fffffff -> 0x0040000000
    ------------[ cut here ]------------
    WARNING: CPU: 2 PID: 1 at arch/mips/pci/pci-generic.c:55 pci_remap_iospace+0x84/0x90
    resource start address is not zero
    ...
    Call Trace:
    [<ffffffff8020dc78>] show_stack+0x40/0x120
    [<ffffffff80cf4a0c>] dump_stack_lvl+0x58/0x74
    [<ffffffff8023a0b0>] __warn+0xe0/0x110
    [<ffffffff80cee02c>] warn_slowpath_fmt+0xa4/0xd0
    [<ffffffff80cecf24>] pci_remap_iospace+0x84/0x90
    [<ffffffff807f9864>] devm_pci_remap_iospace+0x5c/0xb8
    [<ffffffff808121b0>] devm_of_pci_bridge_init+0x178/0x1f8
    [<ffffffff807f4000>] devm_pci_alloc_host_bridge+0x78/0x98
    [<ffffffff80819454>] loongson_pci_probe+0x34/0x160
    [<ffffffff809203cc>] platform_probe+0x6c/0xe0
    [<ffffffff8091d5d4>] really_probe+0xbc/0x340
    [<ffffffff8091d8f0>] __driver_probe_device+0x98/0x110
    [<ffffffff8091d9b8>] driver_probe_device+0x50/0x118
    [<ffffffff8091dea0>] __driver_attach+0x80/0x118
    [<ffffffff8091b280>] bus_for_each_dev+0x80/0xc8
    [<ffffffff8091c6d8>] bus_add_driver+0x130/0x210
    [<ffffffff8091ead4>] driver_register+0x8c/0x150
    [<ffffffff80200a8c>] do_one_initcall+0x54/0x288
    [<ffffffff811a5320>] kernel_init_freeable+0x27c/0x2e4
    [<ffffffff80cfc380>] kernel_init+0x2c/0x134
    [<ffffffff80205a2c>] ret_from_kernel_thread+0x14/0x1c
    ---[ end trace e4a0efe10aa5cce6 ]---
    loongson-pci 1a000000.pci: error -19: failed to map resource [io  0x20000-0x3ffff]

We can see that the resource start address is 0x0000020000, because
the ISA Bridge used the zero address which is defined in the dts file
arch/mips/boot/dts/loongson/ls7a-pch.dtsi:

    ISA Bridge: /bus@10000000/isa@18000000
    IO 0x0000000018000000..0x000000001801ffff  ->  0x0000000000000000

The architecture-independent function pci_remap_iospace() works well
for Loongson64, so just do not define architecture-specific function
pci_remap_iospace() under MACH_LOONGSON64.

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
---
 arch/mips/include/asm/pci.h | 2 ++
 arch/mips/pci/pci-generic.c | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
index 421231f..5d647cb 100644
--- a/arch/mips/include/asm/pci.h
+++ b/arch/mips/include/asm/pci.h
@@ -21,8 +21,10 @@
 #include <linux/of.h>
 
 #ifdef CONFIG_PCI_DRIVERS_GENERIC
+#ifndef CONFIG_MACH_LOONGSON64
 #define pci_remap_iospace pci_remap_iospace
 #endif
+#endif
 
 #ifdef CONFIG_PCI_DRIVERS_LEGACY
 
diff --git a/arch/mips/pci/pci-generic.c b/arch/mips/pci/pci-generic.c
index 18eb8a4..6f18071 100644
--- a/arch/mips/pci/pci-generic.c
+++ b/arch/mips/pci/pci-generic.c
@@ -47,6 +47,7 @@ void pcibios_fixup_bus(struct pci_bus *bus)
 	pci_read_bridge_bases(bus);
 }
 
+#ifndef CONFIG_MACH_LOONGSON64
 int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr)
 {
 	unsigned long vaddr;
@@ -60,3 +61,4 @@ int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr)
 	set_io_port_base(vaddr);
 	return 0;
 }
+#endif
-- 
2.1.0


^ permalink raw reply related	[flat|nested] 5+ messages in thread

* Re: [PATCH] MIPS: Do not define pci_remap_iospace() under MACH_LOONGSON64
  2021-11-17  9:03 [PATCH] MIPS: Do not define pci_remap_iospace() under MACH_LOONGSON64 Tiezhu Yang
@ 2021-12-07 17:06 ` Thomas Bogendoerfer
  2021-12-08 13:47   ` Sergio Paracuellos
  0 siblings, 1 reply; 5+ messages in thread
From: Thomas Bogendoerfer @ 2021-12-07 17:06 UTC (permalink / raw)
  To: Tiezhu Yang; +Cc: Xuefeng Li, linux-mips, linux-kernel

On Wed, Nov 17, 2021 at 05:03:15PM +0800, Tiezhu Yang wrote:
> After commit 9f76779f2418 ("MIPS: implement architecture-specific
> 'pci_remap_iospace()'"), there exists the following warning on the
> Loongson64 platform:
> 
>     loongson-pci 1a000000.pci:       IO 0x0018020000..0x001803ffff -> 0x0000020000
>     loongson-pci 1a000000.pci:      MEM 0x0040000000..0x007fffffff -> 0x0040000000
>     ------------[ cut here ]------------
>     WARNING: CPU: 2 PID: 1 at arch/mips/pci/pci-generic.c:55 pci_remap_iospace+0x84/0x90
>     resource start address is not zero
>     ...
>     Call Trace:
>     [<ffffffff8020dc78>] show_stack+0x40/0x120
>     [<ffffffff80cf4a0c>] dump_stack_lvl+0x58/0x74
>     [<ffffffff8023a0b0>] __warn+0xe0/0x110
>     [<ffffffff80cee02c>] warn_slowpath_fmt+0xa4/0xd0
>     [<ffffffff80cecf24>] pci_remap_iospace+0x84/0x90
>     [<ffffffff807f9864>] devm_pci_remap_iospace+0x5c/0xb8
>     [<ffffffff808121b0>] devm_of_pci_bridge_init+0x178/0x1f8
>     [<ffffffff807f4000>] devm_pci_alloc_host_bridge+0x78/0x98
>     [<ffffffff80819454>] loongson_pci_probe+0x34/0x160
>     [<ffffffff809203cc>] platform_probe+0x6c/0xe0
>     [<ffffffff8091d5d4>] really_probe+0xbc/0x340
>     [<ffffffff8091d8f0>] __driver_probe_device+0x98/0x110
>     [<ffffffff8091d9b8>] driver_probe_device+0x50/0x118
>     [<ffffffff8091dea0>] __driver_attach+0x80/0x118
>     [<ffffffff8091b280>] bus_for_each_dev+0x80/0xc8
>     [<ffffffff8091c6d8>] bus_add_driver+0x130/0x210
>     [<ffffffff8091ead4>] driver_register+0x8c/0x150
>     [<ffffffff80200a8c>] do_one_initcall+0x54/0x288
>     [<ffffffff811a5320>] kernel_init_freeable+0x27c/0x2e4
>     [<ffffffff80cfc380>] kernel_init+0x2c/0x134
>     [<ffffffff80205a2c>] ret_from_kernel_thread+0x14/0x1c
>     ---[ end trace e4a0efe10aa5cce6 ]---
>     loongson-pci 1a000000.pci: error -19: failed to map resource [io  0x20000-0x3ffff]
> 
> We can see that the resource start address is 0x0000020000, because
> the ISA Bridge used the zero address which is defined in the dts file
> arch/mips/boot/dts/loongson/ls7a-pch.dtsi:
> 
>     ISA Bridge: /bus@10000000/isa@18000000
>     IO 0x0000000018000000..0x000000001801ffff  ->  0x0000000000000000
> 
> The architecture-independent function pci_remap_iospace() works well
> for Loongson64, so just do not define architecture-specific function
> pci_remap_iospace() under MACH_LOONGSON64.
> 
> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
> ---
>  arch/mips/include/asm/pci.h | 2 ++
>  arch/mips/pci/pci-generic.c | 2 ++
>  2 files changed, 4 insertions(+)
> 
> diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
> index 421231f..5d647cb 100644
> --- a/arch/mips/include/asm/pci.h
> +++ b/arch/mips/include/asm/pci.h
> @@ -21,8 +21,10 @@
>  #include <linux/of.h>
>  
>  #ifdef CONFIG_PCI_DRIVERS_GENERIC
> +#ifndef CONFIG_MACH_LOONGSON64
>  #define pci_remap_iospace pci_remap_iospace
>  #endif
> +#endif

I prefer a version without new CONFIG_MACH_LOONGSON64 ifdefery. Something
like:


diff --git a/arch/mips/include/asm/mach-ralink/spaces.h b/arch/mips/include/asm/mach-ralink/spaces.h
index 05d14c21c417..f7af11ea2d61 100644
--- a/arch/mips/include/asm/mach-ralink/spaces.h
+++ b/arch/mips/include/asm/mach-ralink/spaces.h
@@ -6,5 +6,7 @@
 #define PCI_IOSIZE	SZ_64K
 #define IO_SPACE_LIMIT	(PCI_IOSIZE - 1)
 
+#define pci_remap_iospace pci_remap_iospace
+
 #include <asm/mach-generic/spaces.h>
 #endif
diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
index 421231f55935..9ffc8192adae 100644
--- a/arch/mips/include/asm/pci.h
+++ b/arch/mips/include/asm/pci.h
@@ -20,10 +20,6 @@
 #include <linux/list.h>
 #include <linux/of.h>
 
-#ifdef CONFIG_PCI_DRIVERS_GENERIC
-#define pci_remap_iospace pci_remap_iospace
-#endif
-
 #ifdef CONFIG_PCI_DRIVERS_LEGACY
 
 /*
diff --git a/arch/mips/pci/pci-generic.c b/arch/mips/pci/pci-generic.c
index 18eb8a453a86..d2d68bac3d25 100644
--- a/arch/mips/pci/pci-generic.c
+++ b/arch/mips/pci/pci-generic.c
@@ -47,6 +47,7 @@ void pcibios_fixup_bus(struct pci_bus *bus)
 	pci_read_bridge_bases(bus);
 }
 
+#ifdef pci_remap_iospace
 int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr)
 {
 	unsigned long vaddr;
@@ -60,3 +61,4 @@ int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr)
 	set_io_port_base(vaddr);
 	return 0;
 }
+#endif

Thomas.

-- 
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]

^ permalink raw reply related	[flat|nested] 5+ messages in thread

* Re: [PATCH] MIPS: Do not define pci_remap_iospace() under MACH_LOONGSON64
  2021-12-07 17:06 ` Thomas Bogendoerfer
@ 2021-12-08 13:47   ` Sergio Paracuellos
  2021-12-09  9:21     ` Thomas Bogendoerfer
  0 siblings, 1 reply; 5+ messages in thread
From: Sergio Paracuellos @ 2021-12-08 13:47 UTC (permalink / raw)
  To: Thomas Bogendoerfer; +Cc: Tiezhu Yang, Xuefeng Li, open list:MIPS, linux-kernel

Hi Thomas,

Sorry I totally missed this patch.

On Wed, Dec 8, 2021 at 5:04 AM Thomas Bogendoerfer
<tsbogend@alpha.franken.de> wrote:
>
> On Wed, Nov 17, 2021 at 05:03:15PM +0800, Tiezhu Yang wrote:
> > After commit 9f76779f2418 ("MIPS: implement architecture-specific
> > 'pci_remap_iospace()'"), there exists the following warning on the
> > Loongson64 platform:
> >
> >     loongson-pci 1a000000.pci:       IO 0x0018020000..0x001803ffff -> 0x0000020000
> >     loongson-pci 1a000000.pci:      MEM 0x0040000000..0x007fffffff -> 0x0040000000
> >     ------------[ cut here ]------------
> >     WARNING: CPU: 2 PID: 1 at arch/mips/pci/pci-generic.c:55 pci_remap_iospace+0x84/0x90
> >     resource start address is not zero
> >     ...
> >     Call Trace:
> >     [<ffffffff8020dc78>] show_stack+0x40/0x120
> >     [<ffffffff80cf4a0c>] dump_stack_lvl+0x58/0x74
> >     [<ffffffff8023a0b0>] __warn+0xe0/0x110
> >     [<ffffffff80cee02c>] warn_slowpath_fmt+0xa4/0xd0
> >     [<ffffffff80cecf24>] pci_remap_iospace+0x84/0x90
> >     [<ffffffff807f9864>] devm_pci_remap_iospace+0x5c/0xb8
> >     [<ffffffff808121b0>] devm_of_pci_bridge_init+0x178/0x1f8
> >     [<ffffffff807f4000>] devm_pci_alloc_host_bridge+0x78/0x98
> >     [<ffffffff80819454>] loongson_pci_probe+0x34/0x160
> >     [<ffffffff809203cc>] platform_probe+0x6c/0xe0
> >     [<ffffffff8091d5d4>] really_probe+0xbc/0x340
> >     [<ffffffff8091d8f0>] __driver_probe_device+0x98/0x110
> >     [<ffffffff8091d9b8>] driver_probe_device+0x50/0x118
> >     [<ffffffff8091dea0>] __driver_attach+0x80/0x118
> >     [<ffffffff8091b280>] bus_for_each_dev+0x80/0xc8
> >     [<ffffffff8091c6d8>] bus_add_driver+0x130/0x210
> >     [<ffffffff8091ead4>] driver_register+0x8c/0x150
> >     [<ffffffff80200a8c>] do_one_initcall+0x54/0x288
> >     [<ffffffff811a5320>] kernel_init_freeable+0x27c/0x2e4
> >     [<ffffffff80cfc380>] kernel_init+0x2c/0x134
> >     [<ffffffff80205a2c>] ret_from_kernel_thread+0x14/0x1c
> >     ---[ end trace e4a0efe10aa5cce6 ]---
> >     loongson-pci 1a000000.pci: error -19: failed to map resource [io  0x20000-0x3ffff]
> >
> > We can see that the resource start address is 0x0000020000, because
> > the ISA Bridge used the zero address which is defined in the dts file
> > arch/mips/boot/dts/loongson/ls7a-pch.dtsi:
> >
> >     ISA Bridge: /bus@10000000/isa@18000000
> >     IO 0x0000000018000000..0x000000001801ffff  ->  0x0000000000000000
> >
> > The architecture-independent function pci_remap_iospace() works well
> > for Loongson64, so just do not define architecture-specific function
> > pci_remap_iospace() under MACH_LOONGSON64.
> >
> > Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
> > ---
> >  arch/mips/include/asm/pci.h | 2 ++
> >  arch/mips/pci/pci-generic.c | 2 ++
> >  2 files changed, 4 insertions(+)
> >
> > diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
> > index 421231f..5d647cb 100644
> > --- a/arch/mips/include/asm/pci.h
> > +++ b/arch/mips/include/asm/pci.h
> > @@ -21,8 +21,10 @@
> >  #include <linux/of.h>
> >
> >  #ifdef CONFIG_PCI_DRIVERS_GENERIC
> > +#ifndef CONFIG_MACH_LOONGSON64
> >  #define pci_remap_iospace pci_remap_iospace
> >  #endif
> > +#endif

I am not sure but maybe just remove the WARN_ON and the if from the
implementation allow also this platform to work with specific MIPS
helper? The only problem I initially see is that the loongson64 puts
isa bridge resource in 0x0 and thus the warning appears. I have to
mention because I don't know other MIPS based SoCs with PCI but
'pci_remap_iospace()' should properly fit all of them... Is a kind of
generic implementation using MIPS 'set_io_port_base()' and 'ioremap()'
for properly remapping things...

>
> I prefer a version without new CONFIG_MACH_LOONGSON64 ifdefery. Something
> like:
>
>
> diff --git a/arch/mips/include/asm/mach-ralink/spaces.h b/arch/mips/include/asm/mach-ralink/spaces.h
> index 05d14c21c417..f7af11ea2d61 100644
> --- a/arch/mips/include/asm/mach-ralink/spaces.h
> +++ b/arch/mips/include/asm/mach-ralink/spaces.h
> @@ -6,5 +6,7 @@
>  #define PCI_IOSIZE     SZ_64K
>  #define IO_SPACE_LIMIT (PCI_IOSIZE - 1)
>
> +#define pci_remap_iospace pci_remap_iospace
> +
>  #include <asm/mach-generic/spaces.h>
>  #endif
> diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
> index 421231f55935..9ffc8192adae 100644
> --- a/arch/mips/include/asm/pci.h
> +++ b/arch/mips/include/asm/pci.h
> @@ -20,10 +20,6 @@
>  #include <linux/list.h>
>  #include <linux/of.h>
>
> -#ifdef CONFIG_PCI_DRIVERS_GENERIC
> -#define pci_remap_iospace pci_remap_iospace
> -#endif
> -
>  #ifdef CONFIG_PCI_DRIVERS_LEGACY
>
>  /*
> diff --git a/arch/mips/pci/pci-generic.c b/arch/mips/pci/pci-generic.c
> index 18eb8a453a86..d2d68bac3d25 100644
> --- a/arch/mips/pci/pci-generic.c
> +++ b/arch/mips/pci/pci-generic.c
> @@ -47,6 +47,7 @@ void pcibios_fixup_bus(struct pci_bus *bus)
>         pci_read_bridge_bases(bus);
>  }
>
> +#ifdef pci_remap_iospace
>  int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr)
>  {
>         unsigned long vaddr;
> @@ -60,3 +61,4 @@ int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr)
>         set_io_port_base(vaddr);
>         return 0;
>  }
> +#endif

I agree this is cleaner than the CONFIG_MACH_LOONGSON64 ifdef stuff. I
have tested this changes in mt7621 ralink platform and all seem to
work, so in case you want to include this, feel free to add my:

Tested-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>

Thomas, if you prefer me to send this as a more formal PATCH, please
let me know.

Best regards,
    Sergio Paracuellos

>
> Thomas.
>
> --
> Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
> good idea.                                                [ RFC1925, 2.3 ]

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH] MIPS: Do not define pci_remap_iospace() under MACH_LOONGSON64
  2021-12-08 13:47   ` Sergio Paracuellos
@ 2021-12-09  9:21     ` Thomas Bogendoerfer
  2021-12-09  9:34       ` Sergio Paracuellos
  0 siblings, 1 reply; 5+ messages in thread
From: Thomas Bogendoerfer @ 2021-12-09  9:21 UTC (permalink / raw)
  To: Sergio Paracuellos; +Cc: Tiezhu Yang, Xuefeng Li, open list:MIPS, linux-kernel

On Wed, Dec 08, 2021 at 02:47:56PM +0100, Sergio Paracuellos wrote:
> > -#endif
> > -
> >  #ifdef CONFIG_PCI_DRIVERS_LEGACY
> >
> >  /*
> > diff --git a/arch/mips/pci/pci-generic.c b/arch/mips/pci/pci-generic.c
> > index 18eb8a453a86..d2d68bac3d25 100644
> > --- a/arch/mips/pci/pci-generic.c
> > +++ b/arch/mips/pci/pci-generic.c
> > @@ -47,6 +47,7 @@ void pcibios_fixup_bus(struct pci_bus *bus)
> >         pci_read_bridge_bases(bus);
> >  }
> >
> > +#ifdef pci_remap_iospace
> >  int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr)
> >  {
> >         unsigned long vaddr;
> > @@ -60,3 +61,4 @@ int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr)
> >         set_io_port_base(vaddr);
> >         return 0;
> >  }
> > +#endif
> 
> I agree this is cleaner than the CONFIG_MACH_LOONGSON64 ifdef stuff. I
> have tested this changes in mt7621 ralink platform and all seem to
> work, so in case you want to include this, feel free to add my:

thank you for testing.

> Tested-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
> Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
> 
> Thomas, if you prefer me to send this as a more formal PATCH, please
> let me know.

Thiezhu already did, I'll add your tags the new patch.

Thomas.

-- 
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH] MIPS: Do not define pci_remap_iospace() under MACH_LOONGSON64
  2021-12-09  9:21     ` Thomas Bogendoerfer
@ 2021-12-09  9:34       ` Sergio Paracuellos
  0 siblings, 0 replies; 5+ messages in thread
From: Sergio Paracuellos @ 2021-12-09  9:34 UTC (permalink / raw)
  To: Thomas Bogendoerfer; +Cc: Tiezhu Yang, Xuefeng Li, open list:MIPS, linux-kernel

On Thu, Dec 9, 2021 at 10:26 AM Thomas Bogendoerfer
<tsbogend@alpha.franken.de> wrote:
>
> On Wed, Dec 08, 2021 at 02:47:56PM +0100, Sergio Paracuellos wrote:
> > > -#endif
> > > -
> > >  #ifdef CONFIG_PCI_DRIVERS_LEGACY
> > >
> > >  /*
> > > diff --git a/arch/mips/pci/pci-generic.c b/arch/mips/pci/pci-generic.c
> > > index 18eb8a453a86..d2d68bac3d25 100644
> > > --- a/arch/mips/pci/pci-generic.c
> > > +++ b/arch/mips/pci/pci-generic.c
> > > @@ -47,6 +47,7 @@ void pcibios_fixup_bus(struct pci_bus *bus)
> > >         pci_read_bridge_bases(bus);
> > >  }
> > >
> > > +#ifdef pci_remap_iospace
> > >  int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr)
> > >  {
> > >         unsigned long vaddr;
> > > @@ -60,3 +61,4 @@ int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr)
> > >         set_io_port_base(vaddr);
> > >         return 0;
> > >  }
> > > +#endif
> >
> > I agree this is cleaner than the CONFIG_MACH_LOONGSON64 ifdef stuff. I
> > have tested this changes in mt7621 ralink platform and all seem to
> > work, so in case you want to include this, feel free to add my:
>
> thank you for testing.
>
> > Tested-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
> > Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
> >
> > Thomas, if you prefer me to send this as a more formal PATCH, please
> > let me know.
>
> Thiezhu already did, I'll add your tags the new patch.

Perfect, thanks!

Best regards,
    Sergio Paracuellos

>
> Thomas.
>
> --
> Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
> good idea.                                                [ RFC1925, 2.3 ]

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2021-12-09  9:34 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-11-17  9:03 [PATCH] MIPS: Do not define pci_remap_iospace() under MACH_LOONGSON64 Tiezhu Yang
2021-12-07 17:06 ` Thomas Bogendoerfer
2021-12-08 13:47   ` Sergio Paracuellos
2021-12-09  9:21     ` Thomas Bogendoerfer
2021-12-09  9:34       ` Sergio Paracuellos

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).