Re: [PATCH v2 2/5] MIPS: ralink: implement 'pcibios_root_bridge_prepare()'

From: Sergio Paracuellos <sergio.paracuellos@gmail.com>
To: Guenter Roeck <linux@roeck-us.net>
Cc: linux-pci <linux-pci@vger.kernel.org>,
	"open list:MIPS" <linux-mips@vger.kernel.org>,
	Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Arnd Bergmann <arnd@arndb.de>,
	linux-kernel <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2 2/5] MIPS: ralink: implement 'pcibios_root_bridge_prepare()'
Date: Fri, 3 Dec 2021 08:03:21 +0100	[thread overview]
Message-ID: <CAMhs-H_Kdai3nOKZjAT04HMu67+wA3saoW_akQkfv3U0po41AQ@mail.gmail.com> (raw)
In-Reply-To: <6ebd3d77-e012-4b27-f0dc-a81c59d76fe4@roeck-us.net>

On Thu, Dec 2, 2021 at 8:45 PM Guenter Roeck <linux@roeck-us.net> wrote:
>
> On 12/1/21 1:51 PM, Sergio Paracuellos wrote:
> > PCI core code call 'pcibios_root_bridge_prepare()' function inside function
> > 'pci_register_host_bridge()'. This point is very good way to properly enter
> > into this MIPS ralink specific code to properly setup I/O coherency units
> > with PCI memory addresses.
> >
> > Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
> > ---
> >   arch/mips/ralink/mt7621.c | 30 ++++++++++++++++++++++++++++++
> >   1 file changed, 30 insertions(+)
> >
> > diff --git a/arch/mips/ralink/mt7621.c b/arch/mips/ralink/mt7621.c
> > index bd71f5b14238..7649416c1cd7 100644
> > --- a/arch/mips/ralink/mt7621.c
> > +++ b/arch/mips/ralink/mt7621.c
> > @@ -10,6 +10,7 @@
> >   #include <linux/slab.h>
> >   #include <linux/sys_soc.h>
> >   #include <linux/memblock.h>
> > +#include <linux/pci.h>
> >
> >   #include <asm/bootinfo.h>
> >   #include <asm/mipsregs.h>
> > @@ -22,6 +23,35 @@
> >
> >   static void *detect_magic __initdata = detect_memory_region;
> >
> > +int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
> > +{
> > +     struct resource_entry *entry;
> > +     resource_size_t mask;
> > +
> > +     entry = resource_list_first_type(&bridge->windows, IORESOURCE_MEM);
> > +     if (!entry) {
> > +             pr_err("Cannot get memory resource\n");
> > +             return -EINVAL;
> > +     }
> > +
> > +     if (mips_cps_numiocu(0)) {
> > +             /*
> > +              * FIXME: hardware doesn't accept mask values with 1s after
> > +              * 0s (e.g. 0xffef), so it would be great to warn if that's
> > +              * about to happen
> > +              */
> > +             mask = ~(entry->res->end - entry->res->start);
> > +
>
> One more comment: From the include file,
>
> #define CM_GCR_REGn_MASK_ADDRMASK               GENMASK(31, 16)
>
> suggests that only the upper 16 bit are valid (relevant ?) for the mask.
> Given that, it might make sense to make sure that the lower 16 bit are not set,
> maybe with
>                 mask = ~(entry->res->end - entry->res->start) & CM_GCR_REGn_MASK_ADDRMASK;
>

Makes sense, thanks.

Best regards,
     Sergio Paracuellos

> Thanks,
> Guenter
>
> > +             write_gcr_reg1_base(entry->res->start);
> > +             write_gcr_reg1_mask(mask | CM_GCR_REGn_MASK_CMTGT_IOCU0);
> > +             pr_info("PCI coherence region base: 0x%08llx, mask/settings: 0x%08llx\n",
> > +                     (unsigned long long)read_gcr_reg1_base(),
> > +                     (unsigned long long)read_gcr_reg1_mask());
> > +     }
> > +
> > +     return 0;
> > +}
> > +
> >   phys_addr_t mips_cpc_default_phys_base(void)
> >   {
> >       panic("Cannot detect cpc address");
> >
>