* i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
@ 2018-05-31 15:09 Jagan Teki
2018-05-31 16:10 ` Nicolas Dufresne
` (2 more replies)
0 siblings, 3 replies; 38+ messages in thread
From: Jagan Teki @ 2018-05-31 15:09 UTC (permalink / raw)
To: Philipp Zabel, Steve Longerbeam, Fabio Estevam
Cc: Discussion of the development of and with GStreamer, linux-media,
linux-kernel
Hi All,
I'm trying to verify MIPI-CSI2 OV5640 camera on i.MX6 platform with
Mainline Linux.
I've followed these[1] instructions to configure MC links and pads
based on the probing details from dmesg and trying to capture
ipu1_ic_prpenc capture (/dev/video1) but it's not working.
Can anyone help me to verify whether I configured all the details
properly if not please suggest.
I'm pasting full log here, so-that anyone can comment in line and dt
changes are at [2]
Log:
-----
[ 1.211866] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0
[ 1.220211] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 0
[ 1.230344] imx-ipuv3 2400000.ipu: IPUv3H probed
[ 1.237170] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.243920] [drm] No driver support for vblank timestamp query.
[ 1.250831] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops
ipu_crtc_ops)
[ 1.258503] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops
ipu_crtc_ops)
[ 1.266293] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops
ipu_crtc_ops)
[ 1.274027] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops
ipu_crtc_ops)
[ 1.282304] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller
v1.30a with HDCP (DWC HDMI 3D TX PHY)
[ 1.295722] imx-drm display-subsystem: bound 120000.hdmi (ops
dw_hdmi_imx_ops)
[ 1.373615] Console: switching to colour frame buffer device 128x48
[ 1.396495] imx-drm display-subsystem: fb0: frame buffer device
[ 1.404620] [drm] Initialized imx-drm 1.0.0 20120507 for
display-subsystem on minor 1
[ 1.412763] imx-ipuv3 2800000.ipu: IPUv3H probed
[ 1.439673] brd: module loaded
[ 1.469099] loop: module loaded
[ 1.480324] nand: No NAND device found
[ 1.487768] libphy: Fixed MDIO Bus: probed
[ 1.493034] CAN device driver interface
[ 1.499057] fec 2188000.ethernet: 2188000.ethernet supply phy not
found, using dummy regulator
[ 1.511633] pps pps0: new PPS source ptp0
[ 1.516928] fec 2188000.ethernet (unnamed net_device)
(uninitialized): Invalid MAC address: 00:00:00:00:00:00
[ 1.527177] fec 2188000.ethernet (unnamed net_device)
(uninitialized): Using random MAC address: f2:5a:6d:a6:90:74
[ 1.543567] libphy: fec_enet_mii_bus: probed
[ 1.549138] fec 2188000.ethernet eth0: registered PHC device 0
[ 1.556499] usbcore: registered new interface driver asix
[ 1.562066] usbcore: registered new interface driver ax88179_178a
[ 1.568259] usbcore: registered new interface driver cdc_ether
[ 1.574276] usbcore: registered new interface driver net1080
[ 1.580097] usbcore: registered new interface driver cdc_subset
[ 1.586144] usbcore: registered new interface driver zaurus
[ 1.591910] usbcore: registered new interface driver cdc_ncm
[ 1.597589] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.604209] ehci-pci: EHCI PCI platform driver
[ 1.608760] ehci-mxc: Freescale On-Chip EHCI Host driver
[ 1.614851] usbcore: registered new interface driver usb-storage
[ 1.629947] ci_hdrc ci_hdrc.0: EHCI Host Controller
[ 1.635066] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
[ 1.669473] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
[ 1.677809] hub 1-0:1.0: USB hub found
[ 1.681902] hub 1-0:1.0: 1 port detected
[ 1.692839] ci_hdrc ci_hdrc.1: EHCI Host Controller
[ 1.697791] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2
[ 1.729537] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
[ 1.736740] hub 2-0:1.0: USB hub found
[ 1.740655] hub 2-0:1.0: 1 port detected
[ 1.753468] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered
20cc000.snvs:snvs-rtc-lp as rtc0
[ 1.762976] i2c /dev entries driver
[ 1.811339] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
[ 1.817865] Bluetooth: HCI UART driver ver 2.3
[ 1.822460] Bluetooth: HCI UART protocol H4 registered
[ 1.828297] Bluetooth: HCI UART protocol LL registered
[ 1.834774] sdhci: Secure Digital Host Controller Interface driver
[ 1.841059] sdhci: Copyright(c) Pierre Ossman
[ 1.845437] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.852834] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO
[ 1.893497] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc]
using ADMA
[ 1.937500] mmc1: SDHCI controller on 2198000.usdhc [2198000.usdhc]
using ADMA
[ 1.945049] mmc0: host does not support reading read-only switch,
assuming write-enable
[ 1.959799] mmc0: new high speed SDHC card at address 1234
[ 1.968363] mmcblk0: mmc0:1234 SA04G 3.71 GiB
[ 1.977984] caam 2100000.caam: Entropy delay = 3200
[ 2.043796] caam 2100000.caam: Instantiated RNG4 SH0
[ 2.104558] caam 2100000.caam: Instantiated RNG4 SH1
[ 2.109596] caam 2100000.caam: device ID = 0x0a16010000000000 (Era 4)
[ 2.116060] caam 2100000.caam: job rings = 2, qi = 0, dpaa2 = no
[ 2.139266] caam algorithms registered in /proc/crypto
[ 2.139341] mmcblk0: p1 p2
[ 2.150910] caam_jr 2101000.jr0: registering rng-caam
[ 2.157327] usbcore: registered new interface driver usbhid
[ 2.163103] usbhid: USB HID core driver
[ 2.171149] imx-media: subdev ov5640 2-003c bound
[ 2.176631] imx-media: subdev ipu1_vdic bound
[ 2.181640] imx-media: subdev ipu2_vdic bound
[ 2.183831] mmc1: new high speed MMC card at address 0001
[ 2.186357] imx-media: subdev ipu1_ic_prp bound
[ 2.193649] mmcblk1: mmc1:0001 M62704 3.53 GiB
[ 2.197342] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video0
[ 2.202620] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB
[ 2.208083] imx-media: subdev ipu1_ic_prpenc bound
[ 2.215764] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB
[ 2.219512] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video1
[ 2.231868] imx-media: subdev ipu1_ic_prpvf bound
[ 2.232186] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB,
chardev (244:0)
[ 2.236748] imx-media: subdev ipu2_ic_prp bound
[ 2.245958] mmcblk1: p1 p2
[ 2.251569] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video2
[ 2.258696] imx-media: subdev ipu2_ic_prpenc bound
[ 2.264108] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video3
[ 2.271119] imx-media: subdev ipu2_ic_prpvf bound
[ 2.277042] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video4
[ 2.283312] imx-media: subdev ipu1_csi0 bound
[ 2.288312] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video5
[ 2.294583] imx-media: subdev ipu1_csi1 bound
[ 2.299694] ipu2_csi0: Registered ipu2_csi0 capture as /dev/video6
[ 2.305902] imx-media: subdev ipu2_csi0 bound
[ 2.310953] ipu2_csi1: Registered ipu2_csi1 capture as /dev/video7
[ 2.317162] imx-media: subdev ipu2_csi1 bound
[ 2.322293] imx-media: subdev imx6-mipi-csi2 bound
[ 2.336025] sgtl5000 2-000a: Error reading chip id -6
[ 2.346932] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW
[ 2.360345] NET: Registered protocol family 10
[ 2.367761] Segment Routing with IPv6
[ 2.371704] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 2.379180] NET: Registered protocol family 17
[ 2.383872] can: controller area network core (rev 20170425 abi 9)
[ 2.390281] NET: Registered protocol family 29
[ 2.394756] can: raw protocol (rev 20170425)
[ 2.399126] can: broadcast manager protocol (rev 20170425 t)
[ 2.404869] can: netlink gateway (rev 20170425) max_hops=1
[ 2.410989] Key type dns_resolver registered
[ 2.420041] Registering SWP/SWPB emulation handler
[ 2.426337] Loading compiled-in X.509 certificates
[ 2.505422] imx-media: subdev ipu1_csi0_mux bound
[ 2.511142] imx-media: subdev ipu2_csi1_mux bound
[ 2.515930] imx-media: imx6-mipi-csi2:4 -> ipu2_csi1_mux:0
[ 2.518384] random: fast init done
[ 2.521600] imx-media: imx6-mipi-csi2:1 -> ipu1_csi0_mux:0
[ 2.530561] imx-media: ov5640 2-003c:0 -> imx6-mipi-csi2:0
[ 2.536094] imx-media: ipu2_csi1:1 -> ipu2_ic_prp:0
[ 2.541052] imx-media: ipu2_csi1:1 -> ipu2_vdic:0
[ 2.545801] imx-media: ipu2_csi1_mux:2 -> ipu2_csi1:0
[ 2.550932] imx-media: ipu2_csi0:1 -> ipu2_ic_prp:0
[ 2.555837] imx-media: ipu2_csi0:1 -> ipu2_vdic:0
[ 2.560629] imx-media: imx6-mipi-csi2:3 -> ipu2_csi0:0
[ 2.565800] imx-media: ipu1_csi1:1 -> ipu1_ic_prp:0
[ 2.570750] imx-media: ipu1_csi1:1 -> ipu1_vdic:0
[ 2.575497] imx-media: imx6-mipi-csi2:2 -> ipu1_csi1:0
[ 2.580716] imx-media: ipu1_csi0:1 -> ipu1_ic_prp:0
[ 2.585623] imx-media: ipu1_csi0:1 -> ipu1_vdic:0
[ 2.590411] imx-media: ipu1_csi0_mux:2 -> ipu1_csi0:0
[ 2.595499] imx-media: ipu2_ic_prp:1 -> ipu2_ic_prpenc:0
[ 2.600901] imx-media: ipu2_ic_prp:2 -> ipu2_ic_prpvf:0
[ 2.606159] imx-media: ipu1_ic_prp:1 -> ipu1_ic_prpenc:0
[ 2.611548] imx-media: ipu1_ic_prp:2 -> ipu1_ic_prpvf:0
[ 2.616803] imx-media: ipu2_vdic:2 -> ipu2_ic_prp:0
[ 2.621754] imx-media: ipu1_vdic:2 -> ipu1_ic_prp:0
[ 2.637015] imx_thermal tempmon: Industrial CPU temperature grade -
max:105C critical:100C passive:95C
[ 2.650475] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock
to 1970-01-01 00:00:00 UTC (0)
[ 2.659880] cfg80211: Loading compiled-in X.509 certificates for
regulatory database
[ 2.674031] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 2.682013] platform regulatory.0: Direct firmware load for
regulatory.db failed with error -2
[ 2.690851] cfg80211: failed to load regulatory.db
[ 2.695737] ALSA device list:
[ 2.698762] No soundcards found.
[ 3.592224] EXT4-fs (mmcblk0p2): recovery complete
[ 3.602020] EXT4-fs (mmcblk0p2): mounted filesystem with ordered
data mode. Opts: (null)
[ 3.610371] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 3.618708] devtmpfs: mounted
[ 3.624665] Freeing unused kernel memory: 1024K
[ 3.743951] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
Starting logging: OK
Initializing random number generator... [ 3.897748] random: dd:
uninitialized urandom read (512 bytes read)
done.
Starting network: OK
Welcome to Engicam i.CoreM6 Quad/Dual/DualLite/Solo
buildroot login: root
# media-ctl -l "'ov5640 2-003c':0 -> 'imx6-mipi-csi2':0[1]"
# media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]"
# media-ctl -l "'ipu1_csi1':1 -> 'ipu1_ic_prp':0[1]"
# media-ctl -l "'ipu1_ic_prp':1 -> 'ipu1_ic_prpenc':0[1]"
# media-ctl -l "'ipu1_ic_prpenc':1 -> 'ipu1_ic_prpenc capture':0[1]"
# media-ctl -V "'ov5640 2-003c':0 [fmt:UYVY2X8/640x480 field:none]"
# media-ctl -V "'imx6-mipi-csi2':2 [fmt:UYVY2X8/640x480 field:none]"
# media-ctl -V "'ipu1_csi1':1 [fmt:AYUV32/640x480 field:none]"
# media-ctl -V "'ipu1_ic_prp':1 [fmt:AYUV32/640x480 field:none]"
# media-ctl -V "'ipu1_ic_prpenc':1 [fmt:AYUV32/640x480 field:none]"
# med# media-ctl -p
Media controller API version 4.17.0
Media device information
------------------------
driver imx-media
model imx-media
serial
bus info
hw revision 0x0
driver version 4.17.0
Device topology
- entity 1: ov5640 2-003c (1 pad, 1 link)
type V4L2 subdev subtype Sensor flags 0
device node name /dev/v4l-subdev0
pad0: Source
[fmt:UYVY8_2X8/640x480 field:none]
-> "imx6-mipi-csi2":0 [ENABLED]
- entity 3: ipu1_vdic (3 pads, 3 links)
type V4L2 subdev subtype Unknown flags 0
device node name /dev/v4l-subdev1
pad0: Sink
[fmt:AYUV8_1X32/640x480 field:none]
<- "ipu1_csi0":1 []
<- "ipu1_csi1":1 []
pad1: Sink
[fmt:UYVY8_2X8/640x480 field:none]
pad2: Source
[fmt:AYUV8_1X32/640x480 field:none]
-> "ipu1_ic_prp":0 []
- entity 7: ipu2_vdic (3 pads, 3 links)
type V4L2 subdev subtype Unknown flags 0
device node name /dev/v4l-subdev2
pad0: Sink
[fmt:AYUV8_1X32/640x480 field:none]
<- "ipu2_csi0":1 []
<- "ipu2_csi1":1 []
pad1: Sink
[fmt:UYVY8_2X8/640x480 field:none]
pad2: Source
[fmt:AYUV8_1X32/640x480 field:none]
-> "ipu2_ic_prp":0 []
- entity 11: ipu1_ic_prp (3 pads, 5 links)
type V4L2 subdev subtype Unknown flags 0
device node name /dev/v4l-subdev3
pad0: Sink
[fmt:AYUV8_1X32/640x480 field:none]
<- "ipu1_vdic":2 []
<- "ipu1_csi0":1 []
<- "ipu1_csi1":1 [ENABLED]
pad1: Source
[fmt:AYUV8_1X32/640x480 field:none]
-> "ipu1_ic_prpenc":0 [ENABLED]
pad2: Source
[fmt:AYUV8_1X32/640x480 field:none]
-> "ipu1_ic_prpvf":0 []
- entity 15: ipu1_ic_prpenc (2 pads, 2 links)
type V4L2 subdev subtype Unknown flags 0
device node name /dev/v4l-subdev4
pad0: Sink
[fmt:AYUV8_1X32/640x480 field:none]
<- "ipu1_ic_prp":1 [ENABLED]
pad1: Source
[fmt:AYUV8_1X32/640x480 field:none]
-> "ipu1_ic_prpenc capture":0 [ENABLED]
- entity 18: ipu1_ic_prpenc capture (1 pad, 1 link)
type Node subtype V4L flags 0
device node name /dev/video0
pad0: Sink
<- "ipu1_ic_prpenc":1 [ENABLED]
- entity 24: ipu1_ic_prpvf (2 pads, 2 links)
type V4L2 subdev subtype Unknown flags 0
device node name /dev/v4l-subdev5
pad0: Sink
[fmt:AYUV8_1X32/640x480 field:none]
<- "ipu1_ic_prp":2 []
pad1: Source
[fmt:AYUV8_1X32/640x480 field:none]
-> "ipu1_ic_prpvf capture":0 []
- entity 27: ipu1_ic_prpvf capture (1 pad, 1 link)
type Node subtype V4L flags 0
device node name /dev/video1
pad0: Sink
<- "ipu1_ic_prpvf":1 []
- entity 33: ipu2_ic_prp (3 pads, 5 links)
type V4L2 subdev subtype Unknown flags 0
device node name /dev/v4l-subdev6
pad0: Sink
[fmt:AYUV8_1X32/640x480 field:none]
<- "ipu2_vdic":2 []
<- "ipu2_csi0":1 []
<- "ipu2_csi1":1 []
pad1: Source
[fmt:AYUV8_1X32/640x480 field:none]
-> "ipu2_ic_prpenc":0 []
pad2: Source
[fmt:AYUV8_1X32/640x480 field:none]
-> "ipu2_ic_prpvf":0 []
- entity 37: ipu2_ic_prpenc (2 pads, 2 links)
type V4L2 subdev subtype Unknown flags 0
device node name /dev/v4l-subdev7
pad0: Sink
[fmt:AYUV8_1X32/640x480 field:none]
<- "ipu2_ic_prp":1 []
pad1: Source
[fmt:AYUV8_1X32/640x480 field:none]
-> "ipu2_ic_prpenc capture":0 []
- entity 40: ipu2_ic_prpenc capture (1 pad, 1 link)
type Node subtype V4L flags 0
device node name /dev/video2
pad0: Sink
<- "ipu2_ic_prpenc":1 []
- entity 46: ipu2_ic_prpvf (2 pads, 2 links)
type V4L2 subdev subtype Unknown flags 0
device node name /dev/v4l-subdev8
pad0: Sink
[fmt:AYUV8_1X32/640x480 field:none]
<- "ipu2_ic_prp":2 []
pad1: Source
[fmt:AYUV8_1X32/640x480 field:none]
-> "ipu2_ic_prpvf capture":0 []
- entity 49: ipu2_ic_prpvf capture (1 pad, 1 link)
type Node subtype V4L flags 0
device node name /dev/video3
pad0: Sink
<- "ipu2_ic_prpvf":1 []
- entity 55: ipu1_csi0 (3 pads, 4 links)
type V4L2 subdev subtype Unknown flags 0
device node name /dev/v4l-subdev9
pad0: Sink
[fmt:UYVY8_2X8/640x480 field:none
crop.bounds:(0,0)/640x480
crop:(0,0)/640x480
compose.bounds:(0,0)/640x480
compose:(0,0)/640x480]
<- "ipu1_csi0_mux":2 []
pad1: Source
[fmt:AYUV8_1X32/640x480 field:none]
-> "ipu1_ic_prp":0 []
-> "ipu1_vdic":0 []
pad2: Source
[fmt:AYUV8_1X32/640x480 field:none]
-> "ipu1_csi0 capture":0 []
- entity 59: ipu1_csi0 capture (1 pad, 1 link)
type Node subtype V4L flags 0
device node name /dev/video4
pad0: Sink
<- "ipu1_csi0":2 []
- entity 65: ipu1_csi1 (3 pads, 4 links)
type V4L2 subdev subtype Unknown flags 0
device node name /dev/v4l-subdev10
pad0: Sink
[fmt:UYVY8_2X8/640x480 field:none
crop.bounds:(0,0)/640x480
crop:(0,0)/640x480
compose.bounds:(0,0)/640x480
compose:(0,0)/640x480]
<- "imx6-mipi-csi2":2 [ENABLED]
pad1: Source
[fmt:AYUV8_1X32/640x480 field:none]
-> "ipu1_ic_prp":0 [ENABLED]
-> "ipu1_vdic":0 []
pad2: Source
[fmt:AYUV8_1X32/640x480 field:none]
-> "ipu1_csi1 capture":0 []
- entity 69: ipu1_csi1 capture (1 pad, 1 link)
type Node subtype V4L flags 0
device node name /dev/video5
pad0: Sink
<- "ipu1_csi1":2 []
- entity 75: ipu2_csi0 (3 pads, 4 links)
type V4L2 subdev subtype Unknown flags 0
device node name /dev/v4l-subdev11
pad0: Sink
[fmt:UYVY8_2X8/640x480 field:none
crop.bounds:(0,0)/640x480
crop:(0,0)/640x480
compose.bounds:(0,0)/640x480
compose:(0,0)/640x480]
<- "imx6-mipi-csi2":3 []
pad1: Source
[fmt:AYUV8_1X32/640x480 field:none]
-> "ipu2_ic_prp":0 []
-> "ipu2_vdic":0 []
pad2: Source
[fmt:AYUV8_1X32/640x480 field:none]
-> "ipu2_csi0 capture":0 []
- entity 79: ipu2_csi0 capture (1 pad, 1 link)
type Node subtype V4L flags 0
device node name /dev/video6
pad0: Sink
<- "ipu2_csi0":2 []
- entity 85: ipu2_csi1 (3 pads, 4 links)
type V4L2 subdev subtype Unknown flags 0
device node name /dev/v4l-subdev12
pad0: Sink
[fmt:UYVY8_2X8/640x480 field:none
crop.bounds:(0,0)/640x480
crop:(0,0)/640x480
compose.bounds:(0,0)/640x480
compose:(0,0)/640x480]
<- "ipu2_csi1_mux":2 []
pad1: Source
[fmt:AYUV8_1X32/640x480 field:none]
-> "ipu2_ic_prp":0 []
-> "ipu2_vdic":0 []
pad2: Source
[fmt:AYUV8_1X32/640x480 field:none]
-> "ipu2_csi1 capture":0 []
- entity 89: ipu2_csi1 capture (1 pad, 1 link)
type Node subtype V4L flags 0
device node name /dev/video7
pad0: Sink
<- "ipu2_csi1":2 []
- entity 95: imx6-mipi-csi2 (5 pads, 5 links)
type V4L2 subdev subtype Unknown flags 0
device node name /dev/v4l-subdev13
pad0: Sink
[fmt:UYVY8_2X8/640x480 field:none]
<- "ov5640 2-003c":0 [ENABLED]
pad1: Source
[fmt:UYVY8_2X8/640x480 field:none]
-> "ipu1_csi0_mux":0 []
pad2: Source
[fmt:UYVY8_2X8/640x480 field:none]
-> "ipu1_csi1":0 [ENABLED]
pad3: Source
[fmt:UYVY8_2X8/640x480 field:none]
-> "ipu2_csi0":0 []
pad4: Source
[fmt:UYVY8_2X8/640x480 field:none]
-> "ipu2_csi1_mux":0 []
- entity 101: ipu1_csi0_mux (3 pads, 2 links)
type V4L2 subdev subtype Unknown flags 0
device node name /dev/v4l-subdev14
pad0: Sink
[fmt:unknown/0x0]
<- "imx6-mipi-csi2":1 []
pad1: Sink
[fmt:unknown/0x0]
pad2: Source
[fmt:unknown/0x0]
-> "ipu1_csi0":0 []
- entity 105: ipu2_csi1_mux (3 pads, 2 links)
type V4L2 subdev subtype Unknown flags 0
device node name /dev/v4l-subdev15
pad0: Sink
[fmt:unknown/0x0]
<- "imx6-mipi-csi2":4 []
pad1: Sink
[fmt:unknown/0x0]
pad2: Source
[fmt:unknown/0x0]
-> "ipu2_csi1":0 []
# GST_DEBUG="v4l2*:5" gst-launch-1.0 -v v4l2src device=/dev/video1 ! \
> autovideosink
0:00:01.086281666 185 0x1dce880 DEBUG v4l2
gstv4l2object.c:1487:gst_v4l2_object_v4l1
0:00:01.087369666 185 0x1dce880 DEBUG v4l2
gstv4l2object.c:1487:gst_v4l2_object_v4l5
0:00:01.088496000 185 0x1dce880 DEBUG v4l2
gstv4l2object.c:1487:gst_v4l2_object_v4l.
0:00:01.089540333 185 0x1dce880 DEBUG v4l2
gstv4l2object.c:1487:gst_v4l2_object_v4lR
0:00:01.090494666 185 0x1dce880 DEBUG v4l2
gstv4l2object.c:1487:gst_v4l2_object_v4lH
0:00:01.091657666 185 0x1dce880 DEBUG v4l2
gstv4l2object.c:1487:gst_v4l2_object_v4l4
0:00:01.092745000 185 0x1dce880 DEBUG v4l2
gstv4l2object.c:1487:gst_v4l2_object_v4l
0:00:01.093703333 185 0x1dce880 DEBUG v4l2
gstv4l2object.c:1487:gst_v4l2_object_v4l
0:00:01.094854000 185 0x1dce880 DEBUG v4l2
gstv4l2object.c:1487:gst_v4l2_object_v4l
0:00:01.095815000 185 0x1dce880 DEBUG v4l2
gstv4l2object.c:1487:gst_v4l2_object_v4l
0:00:01.096818666 185 0x1dce880 DEBUG v4l2
gstv4l2object.c:1487:gst_v4l2_object_v4lB
0:00:01.097819000 185 0x1dce880 DEBUG v4l2
gstv4l2object.c:1487:gst_v4l2_object_v4l8
0:00:01.098771000 185 0x1dce880 DEBUG v4l2
gstv4l2object.c:1487:gst_v4l2_object_v4l
0:00:01.099798666 185 0x1dce880 DEBUG v4l2
gstv4l2object.c:1487:gst_v4l2_object_v4l1
0:00:01.100776666 185 0x1dce880 DEBUG v4l2
gstv4l2object.c:1487:gst_v4l2_object_v4lV
0:00:01.101755333 185 0x1dce880 DEBUG v4l2
gstv4l2object.c:1487:gst_v4l2_object_v4lY
0:00:01.102771666 185 0x1dce880 DEBUG v4l2
gstv4l2object.c:1487:gst_v4l2_object_v4lP
0:00:01.103712000 185 0x1dce880 DEBUG v4l2
gstv4l2object.c:1487:gst_v4l2_object_v4l4
0:00:01.104720000 185 0x1dce880 DEBUG v4l2
gstv4l2object.c:1487:gst_v4l2_object_v4lO
0:00:01.105697000 185 0x1dce880 DEBUG v4l2
gstv4l2object.c:1487:gst_v4l2_object_v4lP
0:00:01.106629666 185 0x1dce880 DEBUG v4l2
gstv4l2object.c:1487:gst_v4l2_object_v4l4
0:00:01.107681666 185 0x1dce880 DEBUG v4l2
gstv4l2object.c:1487:gst_v4l2_object_v4l4
0:00:01.108660666 185 0x1dce880 DEBUG v4l2
gstv4l2object.c:1487:gst_v4l2_object_v4l2
0:00:01.442437333 185 0x1dce880 DEBUG v4l2
gstv4l2object.c:1487:gst_v4l2_object_v4l0
0:00:01.444673333 185 0x1dce880 DEBUG v4l2
gstv4l2object.c:1487:gst_v4l2_object_v4l2
0:00:01.446842000 185 0x1dce880 DEBUG v4l2
gstv4l2object.c:1487:gst_v4l2_object_v4l2
0:00:01.449084000 185 0x1dce880 DEBUG v4l2
gstv4l2object.c:1487:gst_v4l2_object_v4l4
Setting pipeline to PAUSED ...
0:00:01.680823000 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:524:gst_v4l2_open:<v4l2src01
0:00:01.681953333 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:69:gst_v4l2_get_capabilities
0:00:01.683098666 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:140:gst_v4l2_fill_lists:<v4s
0:00:01.684056666 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:143:gst_v4l2_fill_lists:<v4s
0:00:01.685201000 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:215:gst_v4l2_fill_lists:<v4s
0:00:01.686159333 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
0:00:01.687207666 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:257:gst_v4l2_fill_lists:<v4C
0:00:01.688183666 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
0:00:01.689155333 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:257:gst_v4l2_fill_lists:<v4M
0:00:01.690142000 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
0:00:01.691114000 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:257:gst_v4l2_fill_lists:<v4P
0:00:01.692080000 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
0:00:01.693073000 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:257:gst_v4l2_fill_lists:<v4R
0:00:01.694043000 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
0:00:01.695760000 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:257:gst_v4l2_fill_lists:<v4L
0:00:01.696736333 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
0:00:01.697708000 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:257:gst_v4l2_fill_lists:<v4G
0:00:01.698699000 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
0:00:01.699667000 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:257:gst_v4l2_fill_lists:<v4H
0:00:01.700633000 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
0:00:01.701623666 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:257:gst_v4l2_fill_lists:<v4I
0:00:01.702591000 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
0:00:01.703554333 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:257:gst_v4l2_fill_lists:<v4K
0:00:01.704604000 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
0:00:01.705576666 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:257:gst_v4l2_fill_lists:<v4M
0:00:01.706567000 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
0:00:02.040204667 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:257:gst_v4l2_fill_lists:<v4B
0:00:02.042194667 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
0:00:02.044190000 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:257:gst_v4l2_fill_lists:<v4G
0:00:02.046338333 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
0:00:02.048327667 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:257:gst_v4l2_fill_lists:<v4H
0:00:02.050296000 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
0:00:02.052385000 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:257:gst_v4l2_fill_lists:<v4K
0:00:02.054376000 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
0:00:02.056461333 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:257:gst_v4l2_fill_lists:<v4L
0:00:02.058434000 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
0:00:02.060423667 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:257:gst_v4l2_fill_lists:<v4c
0:00:02.062382667 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:263:gst_v4l2_fill_lists:<v4s
0:00:02.064291333 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:283:gst_v4l2_fill_lists:<v40
0:00:02.066224667 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:292:gst_v4l2_fill_lists:<v4.
0:00:02.067190333 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:283:gst_v4l2_fill_lists:<v40
0:00:02.068174333 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:300:gst_v4l2_fill_lists:<v40
0:00:02.069141000 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:283:gst_v4l2_fill_lists:<v40
0:00:02.070113000 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:305:gst_v4l2_fill_lists:<v4d
0:00:02.071088333 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:456:gst_v4l2_fill_lists:<v4e
0:00:02.072040000 185 0x1dce880 INFO v4l2
v4l2_calls.c:592:gst_v4l2_open:<v4l2src0y
0:00:02.073017333 185 0x1dce880 DEBUG v4l2
gstv4l2object.c:804:gst_v4l2_set_default)
0:00:02.074010667 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:740:gst_v4l2_get_norm:<v4l2m
0:00:02.075021000 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:754:gst_v4l2_get_norm: Fail1
0:00:02.076012000 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:1027:gst_v4l2_get_input:<v4t
Pipeline is live and does not need PREROLL ...
0:00:02.080105333 185 0x1ec39b0 DEBUG v4l2
gstv4l2object.c:1109:gst_v4l2_object_fil.
<v4l2src0> getting src format enumerations
0:00:02.412981333 185 0x1ec39b0 INFO New clock: GstSystemClock
v4l2 gstv4l2object.c:1146:gst_v4l2_object_fill_format_list:<v4l2src0>
got 7 format(s):
0:00:02.415407667 185 0x1ec39b0 INFO v4l2
gstv4l2object.c:1152:gst_v4l2_object_filV
0:00:02.417531667 185 0x1ec39b0 INFO v4l2
gstv4l2object.c:1152:gst_v4l2_object_filY
0:00:02.419703667 185 0x1ec39b0 INFO v4l2
gstv4l2object.c:1152:gst_v4l2_object_filP
0:00:02.421860000 185 0x1ec39b0 INFO v4l2
gstv4l2object.c:1152:gst_v4l2_object_fil2
0:00:02.424022667 185 0x1ec39b0 INFO v4l2
gstv4l2object.c:1152:gst_v4l2_object_fil2
0:00:02.426295000 185 0x1ec39b0 INFO v4l2
gstv4l2object.c:1152:gst_v4l2_object_fil6
0:00:02.428481333 185 0x1ec39b0 INFO v4l2
gstv4l2object.c:1152:gst_v4l2_object_fil2
0:00:02.430728333 185 0x1ec39b0 DEBUG v4l2
gstv4l2object.c:2564:gst_v4l2_object_proV
0:00:02.432985333 185 0x1ec39b0 DEBUG v4l2
gstv4l2object.c:2691:gst_v4l2_object_pro)
0:00:02.436117000 185 0x1ec39b0 DEBUG v4l2
gstv4l2object.c:2564:gst_v4l2_object_proY
0:00:02.437252333 185 0x1ec39b0 DEBUG v4l2
gstv4l2object.c:2691:gst_v4l2_object_pro)
0:00:02.438579000 185 0x1ec39b0 DEBUG v4l2
gstv4l2object.c:2564:gst_v4l2_object_proP
0:00:02.439656000 185 0x1ec39b0 DEBUG v4l2
gstv4l2object.c:2691:gst_v4l2_object_pro)
0:00:02.441016667 185 0x1ec39b0 DEBUG v4l2
gstv4l2object.c:2564:gst_v4l2_object_pro2
0:00:02.442092333 185 0x1ec39b0 DEBUG v4l2
gstv4l2object.c:2691:gst_v4l2_object_pro)
0:00:02.443443333 185 0x1ec39b0 DEBUG v4l2
gstv4l2object.c:2564:gst_v4l2_object_pro2
0:00:02.444626667 185 0x1ec39b0 DEBUG v4l2
gstv4l2object.c:2691:gst_v4l2_object_pro)
0:00:02.445990667 185 0x1ec39b0 DEBUG v4l2
gstv4l2object.c:2564:gst_v4l2_object_pro6
0:00:02.447063667 185 0x1ec39b0 DEBUG v4l2
gstv4l2object.c:2691:gst_v4l2_object_pro)
0:00:02.448410333 185 0x1ec39b0 DEBUG v4l2
gstv4l2object.c:2564:gst_v4l2_object_pro2
0:00:02.782148333 185 0x1ec39b0 DEBUG v4l2
gstv4l2object.c:2691:gst_v4l2_object_pro)
0:00:02.785264333 185 0x1ec39b0 INFO v4l2
gstv4l2object.c:3967:gst_v4l2_object_get}
0:00:02.788800000 185 0x1ec39b0 DEBUG v4l2src
gstv4l2src.c:300:gst_v4l2src_negotiate:<}
0:00:02.792207000 185 0x1ec39b0 DEBUG v4l2src
gstv4l2src.c:308:gst_v4l2src_negotiate:<]
0:00:02.795419000 185 0x1ec39b0 DEBUG v4l2src
gstv4l2src.c:316:gst_v4l2src_negotiate:<}
0:00:03.132052667 185 0x1ec39b0 DEBUG v4l2src
gstv4l2src.c:256:gst_v4l2src_fixate:<v4l}
0:00:03.134399667 185 0x1ec39b0 DEBUG v4l2src
gstv4l2src.c:282:gst_v4l2src_fixate:<v4l}
0:00:03.136800667 185 0x1ec39b0 DEBUG v4l2src
gstv4l2src.c:367:gst_v4l2src_negotiate:<1
0:00:03.139067333 185 0x1ec39b0 DEBUG v4l2
gstv4l2object.c:3887:gst_v4l2_object_stog
0:00:03.141452000 185 0x1ec39b0 DEBUG v4l2
gstv4l2object.c:3176:gst_v4l2_object_seto
0:00:03.143608667 185 0x1ec39b0 DEBUG v4l2
gstv4l2object.c:3310:gst_v4l2_object_set0
0:00:03.146025333 185 0x1ec39b0 DEBUG v4l2
gstv4l2object.c:3361:gst_v4l2_object_set1
0:00:03.148229000 185 0x1ec39b0 DEBUG v4l2
gstv4l2object.c:3370:gst_v4l2_object_set0
0:00:03.150373667 185 0x1ec39b0 DEBUG v4l2
gstv4l2object.c:3404:gst_v4l2_object_set1
0:00:03.152589667 185 0x1ec39b0 DEBUG v4l2
gstv4l2object.c:3414:gst_v4l2_object_set0
0:00:03.155250667 185 0x1ec39b0 DEBUG v4l2
gstv4l2object.c:3455:gst_v4l2_object_set1
0:00:03.156584667 185 0x1ec39b0 DEBUG v4l2
gstv4l2object.c:3472:gst_v4l2_object_set1
0:00:03.157659333 185 0x1ec39b0 INFO v4l2
gstv4l2object.c:3504:gst_v4l2_object_set1
0:00:03.491432000 185 0x1ec39b0 DEBUG v4l2
gstv4l2object.c:2960:gst_v4l2_object_ext0
0:00:03.493645333 185 0x1ec39b0 DEBUG v4l2
gstv4l2object.c:3071:gst_v4l2_object_sav0
0:00:03.496027333 185 0x1ec39b0 DEBUG v4l2
gstv4l2object.c:2843:gst_v4l2_object_setm
0:00:03.498180000 185 0x1ec39b0 INFO v4l2
gstv4l2object.c:2867:gst_v4l2_object_set2
0:00:03.502772000 185 0x1ec39b0 DEBUG v4l2bufferpool
gstv4l2bufferpool.c:509:gst_v4l2_buffer_;
0:00:03.505283333 185 0x1ec39b0 INFO v4l2bufferpool
gstv4l2bufferpool.c:557:gst_v4l2_buffer_2
0:00:03.507120000 185 0x1ec39b0 INFO v4l2bufferpool
gstv4l2bufferpool.c:570:gst_v4l2_buffer_2
/GstPipeline:pipeline0/GstV4l2Src:v4l2src0.GstPad:src: caps =
video/x-raw, format=(string)YUY2, width=(i1
/GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0.GstGhostPad:sink.GstProxyPad:proxypad0:
caps = vi1
/GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0/GstKMSSink:autovideosink0-actual-sink-kms.GstPad:1
0:00:03/GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0.GstGhostPad:sink:
caps = video/x-raw, form1
.512440000 185 0x1ec39b0 DEBUG v4l2
gstv4l2object.c:3985:gst_v4l2_object_decide_alln
0:00:03.513556667 185 0x1ec39b0 DEBUG v4l2
gstv4l2object.c:4011:gst_v4l2_object_dec>
0:00:03.514745667 185 0x1ec39b0 DEBUG v4l2
gstv4l2object.c:4069:gst_v4l2_object_dec>
0:00:03.515889000 185 0x1ec39b0 DEBUG v4l2
gstv4l2object.c:4134:gst_v4l2_object_deca
0:00:03.516969667 185 0x1ec39b0 DEBUG v4l2
gstv4l2object.c:4143:gst_v4l2_object_dec;
0:00:03.851350333 185 0x1ec39b0 DEBUG v4l2bufferpool
gstv4l2bufferpool.c:509:gst_v4l2_buffer_2
ams)NULL, options=(string)< GstBufferPoolOptionVideoMeta >;
0:00:03.853620333 185 0x1ec39b0 INFO v4l2bufferpool
gstv4l2bufferpool.c:570:gst_v4l2_buffer_2
0:00:03.855780667 185 0x1ec39b0 DEBUG v4l2
gstv4l2object.c:4150:gst_v4l2_object_dec;
0:00:03.858430000 185 0x1ec39b0 DEBUG v4l2bufferpool
gstv4l2bufferpool.c:509:gst_v4l2_buffer_;
0:00:03.861572333 185 0x1ec39b0 DEBUG v4l2bufferpool
gstv4l2bufferpool.c:707:gst_v4l2_buffer_l
0:00:03.863468333 185 0x1ec39b0 DEBUG v4l2bufferpool
gstv4l2bufferpool.c:737:gst_v4l2_buffer_s
0:00:03.918861000 185 0x1ec39b0 DEBUG v4l2allocator
gstv4l2allocator.c:706:gst_v4l2_allocatod
0:00:03.943783333 185 0x1ec39b0 DEBUG v4l2bufferpool
gstv4l2bufferpool.c:1389:gst_v4l2_buffer8
0:00:03.946129333 185 0x1ec39b0 DEBUG v4l2bufferpool
gstv4l2bufferpool.c:1389:gst_v4l2_buffer8
0:00:03.948065000 185 0x1ec39b0 DEBUG v4l2bufferpool
gstv4l2bufferpool.c:1389:gst_v4l2_buffer8
0:00:03.950006000 185 0x1ec39b0 DEBUG v4l2bufferpool
gstv4l2bufferpool.c:952:gst_v4l2_buffer_g
0:00:03.996241333 185 0x1ec39b0 ERROR v4l2bufferpool
gstv4l2bufferpool.c:641:gst_v4l2_buffer_)
0:00:03.998199667 185 0x1ec39b0 DEBUG v4l2bufferpool
gstv4l2bufferpool.c:1311:gst_v4l2_buffere
0:00:04.000463000 185 0x1ec39b0 WARN v4l2bufferpool
gstv4l2bufferpool.c:1064:gst_v4l2_buffer)
0:00:04.004649333 185 0x1ec39b0 DEBUG v4l2bufferpool
gstv4l2bufferpool.c:1283:gst_v4l2_bufferr
0:00:04.005853333 185 0x1ec39b0 WARN v4l2src
gstv4l2src.c:866:gst_v4l2src_create:<v4lr
ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Could
not read from resource.
Additional debug info:
gstv4l2bufferpool.c(1064): gst_v4l2_buffer_pool_poll ():
/GstPipeline:pipeline0/GstV4l2Src:v4l2src0:
poll error 1: Resource temporarily unavailable (11)
Execution ended after 0:00:01.606871334
Setting pipeline to PAUSED ...
0:00:04.022385000 185 0x1dce880 DEBUG v4l2bufferpool
gstv4l2bufferpool.c:931:gst_v4l2_buffer_g
Setting pipeline to READY ...
0:00:04.024850667 185 0x1dce880 DEBUG v4l2bufferpool
gstv4l2bufferpool.c:879:gst_v4l2_buffer_l
0:00:04.026764000 185 0x1dce880 DEBUG v4l2allocator
gstv4l2allocator.c:757:gst_v4l2_allocator
0:00:04.028598333 185 0x1dce880 DEBUG v4l2allocator
gstv4l2allocator.c:765:gst_v4l2_allocatoe
0:00:04.362785667 185 0x1dce880 WARN v4l2bufferpool
gstv4l2bufferpool.c:918:gst_v4l2_buffer_g
0:00:04.364712333 185 0x1dce880 DEBUG v4l2bufferpool
gstv4l2bufferpool.c:952:gst_v4l2_buffer_g
0:00:04.366504333 185 0x1dce880 DEBUG v4l2bufferpool
gstv4l2bufferpool.c:629:gst_v4l2_buffer_g
0:00:04.368607000 185 0x1dce880 DEBUG v4l2
gstv4l2object.c:3887:gst_v4l2_object_stog
0:00:04.370713333 185 0x1dce880 DEBUG v4l2
gstv4l2object.c:3895:gst_v4l2_object_stol
0:00:04.372809333 185 0x1dce880 DEBUG v4l2bufferpool
gstv4l2bufferpool.c:931:gst_v4l2_buffer_g
0:00:04.374732000 185 0x1dce880 DEBUG v4l2bufferpool
gstv4l2bufferpool.c:879:gst_v4l2_buffer_l
0:00:04.376541000 185 0x1dce880 DEBUG v4l2bufferpool
gstv4l2bufferpool.c:663:gst_v4l2_buffer_g
0:00:04.378334000 185 0x1dce880 DEBUG v4l2allocator
gstv4l2allocator.c:757:gst_v4l2_allocator
Setting pipeline to NULL ...
0:00:04.394764333 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:716:gst_v4l2_close:<v4l2src1
0:00:04.395897667 185 0x1dce880 DEBUG v4l2
v4l2_calls.c:464:gst_v4l2_empty_lists:<vs
Freeing pipeline ...
[1] https://linuxtv.org/downloads/v4l-dvb-apis/v4l-drivers/imx.html#sabresd-with-mipi-csi-2-ov5640
[2] https://paste.ubuntu.com/p/CTvFqdbyMW/
Jagan.
--
Jagan Teki
Senior Linux Kernel Engineer | Amarula Solutions
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
2018-05-31 15:09 i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux Jagan Teki
@ 2018-05-31 16:10 ` Nicolas Dufresne
2018-05-31 16:25 ` Jagan Teki
2018-05-31 19:06 ` Philipp Zabel
2018-09-20 14:56 ` jacopo mondi
2 siblings, 1 reply; 38+ messages in thread
From: Nicolas Dufresne @ 2018-05-31 16:10 UTC (permalink / raw)
To: Jagan Teki, Philipp Zabel, Steve Longerbeam, Fabio Estevam
Cc: Discussion of the development of and with GStreamer, linux-media,
linux-kernel
[-- Attachment #1: Type: text/plain, Size: 39347 bytes --]
Le jeudi 31 mai 2018 à 20:39 +0530, Jagan Teki a écrit :
> Hi All,
>
> I'm trying to verify MIPI-CSI2 OV5640 camera on i.MX6 platform with
> Mainline Linux.
>
> I've followed these[1] instructions to configure MC links and pads
> based on the probing details from dmesg and trying to capture
> ipu1_ic_prpenc capture (/dev/video1) but it's not working.
>
> Can anyone help me to verify whether I configured all the details
> properly if not please suggest.
>
> I'm pasting full log here, so-that anyone can comment in line and dt
> changes are at [2]
Be aware that because all of the provided GStreamer logs lines are
truncated, I won't be able to comment on the issue.
>
> Log:
> -----
>
> [ 1.211866] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and
> FE2.0
> [ 1.220211] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv
> on minor 0
> [ 1.230344] imx-ipuv3 2400000.ipu: IPUv3H probed
> [ 1.237170] [drm] Supports vblank timestamp caching Rev 2
> (21.10.2013).
> [ 1.243920] [drm] No driver support for vblank timestamp query.
> [ 1.250831] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops
> ipu_crtc_ops)
> [ 1.258503] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops
> ipu_crtc_ops)
> [ 1.266293] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops
> ipu_crtc_ops)
> [ 1.274027] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops
> ipu_crtc_ops)
> [ 1.282304] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller
> v1.30a with HDCP (DWC HDMI 3D TX PHY)
> [ 1.295722] imx-drm display-subsystem: bound 120000.hdmi (ops
> dw_hdmi_imx_ops)
> [ 1.373615] Console: switching to colour frame buffer device
> 128x48
> [ 1.396495] imx-drm display-subsystem: fb0: frame buffer device
> [ 1.404620] [drm] Initialized imx-drm 1.0.0 20120507 for
> display-subsystem on minor 1
> [ 1.412763] imx-ipuv3 2800000.ipu: IPUv3H probed
> [ 1.439673] brd: module loaded
> [ 1.469099] loop: module loaded
> [ 1.480324] nand: No NAND device found
> [ 1.487768] libphy: Fixed MDIO Bus: probed
> [ 1.493034] CAN device driver interface
> [ 1.499057] fec 2188000.ethernet: 2188000.ethernet supply phy not
> found, using dummy regulator
> [ 1.511633] pps pps0: new PPS source ptp0
> [ 1.516928] fec 2188000.ethernet (unnamed net_device)
> (uninitialized): Invalid MAC address: 00:00:00:00:00:00
> [ 1.527177] fec 2188000.ethernet (unnamed net_device)
> (uninitialized): Using random MAC address: f2:5a:6d:a6:90:74
> [ 1.543567] libphy: fec_enet_mii_bus: probed
> [ 1.549138] fec 2188000.ethernet eth0: registered PHC device 0
> [ 1.556499] usbcore: registered new interface driver asix
> [ 1.562066] usbcore: registered new interface driver ax88179_178a
> [ 1.568259] usbcore: registered new interface driver cdc_ether
> [ 1.574276] usbcore: registered new interface driver net1080
> [ 1.580097] usbcore: registered new interface driver cdc_subset
> [ 1.586144] usbcore: registered new interface driver zaurus
> [ 1.591910] usbcore: registered new interface driver cdc_ncm
> [ 1.597589] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
> Driver
> [ 1.604209] ehci-pci: EHCI PCI platform driver
> [ 1.608760] ehci-mxc: Freescale On-Chip EHCI Host driver
> [ 1.614851] usbcore: registered new interface driver usb-storage
> [ 1.629947] ci_hdrc ci_hdrc.0: EHCI Host Controller
> [ 1.635066] ci_hdrc ci_hdrc.0: new USB bus registered, assigned
> bus number 1
> [ 1.669473] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
> [ 1.677809] hub 1-0:1.0: USB hub found
> [ 1.681902] hub 1-0:1.0: 1 port detected
> [ 1.692839] ci_hdrc ci_hdrc.1: EHCI Host Controller
> [ 1.697791] ci_hdrc ci_hdrc.1: new USB bus registered, assigned
> bus number 2
> [ 1.729537] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
> [ 1.736740] hub 2-0:1.0: USB hub found
> [ 1.740655] hub 2-0:1.0: 1 port detected
> [ 1.753468] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core:
> registered
> 20cc000.snvs:snvs-rtc-lp as rtc0
> [ 1.762976] i2c /dev entries driver
> [ 1.811339] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
> [ 1.817865] Bluetooth: HCI UART driver ver 2.3
> [ 1.822460] Bluetooth: HCI UART protocol H4 registered
> [ 1.828297] Bluetooth: HCI UART protocol LL registered
> [ 1.834774] sdhci: Secure Digital Host Controller Interface driver
> [ 1.841059] sdhci: Copyright(c) Pierre Ossman
> [ 1.845437] sdhci-pltfm: SDHCI platform and OF driver helper
> [ 1.852834] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO
> [ 1.893497] mmc0: SDHCI controller on 2190000.usdhc
> [2190000.usdhc]
> using ADMA
> [ 1.937500] mmc1: SDHCI controller on 2198000.usdhc
> [2198000.usdhc]
> using ADMA
> [ 1.945049] mmc0: host does not support reading read-only switch,
> assuming write-enable
> [ 1.959799] mmc0: new high speed SDHC card at address 1234
> [ 1.968363] mmcblk0: mmc0:1234 SA04G 3.71 GiB
> [ 1.977984] caam 2100000.caam: Entropy delay = 3200
> [ 2.043796] caam 2100000.caam: Instantiated RNG4 SH0
> [ 2.104558] caam 2100000.caam: Instantiated RNG4 SH1
> [ 2.109596] caam 2100000.caam: device ID = 0x0a16010000000000 (Era
> 4)
> [ 2.116060] caam 2100000.caam: job rings = 2, qi = 0, dpaa2 = no
> [ 2.139266] caam algorithms registered in /proc/crypto
> [ 2.139341] mmcblk0: p1 p2
> [ 2.150910] caam_jr 2101000.jr0: registering rng-caam
> [ 2.157327] usbcore: registered new interface driver usbhid
> [ 2.163103] usbhid: USB HID core driver
> [ 2.171149] imx-media: subdev ov5640 2-003c bound
> [ 2.176631] imx-media: subdev ipu1_vdic bound
> [ 2.181640] imx-media: subdev ipu2_vdic bound
> [ 2.183831] mmc1: new high speed MMC card at address 0001
> [ 2.186357] imx-media: subdev ipu1_ic_prp bound
> [ 2.193649] mmcblk1: mmc1:0001 M62704 3.53 GiB
> [ 2.197342] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as
> /dev/video0
> [ 2.202620] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB
> [ 2.208083] imx-media: subdev ipu1_ic_prpenc bound
> [ 2.215764] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB
> [ 2.219512] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as
> /dev/video1
> [ 2.231868] imx-media: subdev ipu1_ic_prpvf bound
> [ 2.232186] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB,
> chardev (244:0)
> [ 2.236748] imx-media: subdev ipu2_ic_prp bound
> [ 2.245958] mmcblk1: p1 p2
> [ 2.251569] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as
> /dev/video2
> [ 2.258696] imx-media: subdev ipu2_ic_prpenc bound
> [ 2.264108] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as
> /dev/video3
> [ 2.271119] imx-media: subdev ipu2_ic_prpvf bound
> [ 2.277042] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video4
> [ 2.283312] imx-media: subdev ipu1_csi0 bound
> [ 2.288312] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video5
> [ 2.294583] imx-media: subdev ipu1_csi1 bound
> [ 2.299694] ipu2_csi0: Registered ipu2_csi0 capture as /dev/video6
> [ 2.305902] imx-media: subdev ipu2_csi0 bound
> [ 2.310953] ipu2_csi1: Registered ipu2_csi1 capture as /dev/video7
> [ 2.317162] imx-media: subdev ipu2_csi1 bound
> [ 2.322293] imx-media: subdev imx6-mipi-csi2 bound
> [ 2.336025] sgtl5000 2-000a: Error reading chip id -6
> [ 2.346932] fsl-ssi-dai 2028000.ssi: No cache defaults, reading
> back from HW
> [ 2.360345] NET: Registered protocol family 10
> [ 2.367761] Segment Routing with IPv6
> [ 2.371704] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
> [ 2.379180] NET: Registered protocol family 17
> [ 2.383872] can: controller area network core (rev 20170425 abi 9)
> [ 2.390281] NET: Registered protocol family 29
> [ 2.394756] can: raw protocol (rev 20170425)
> [ 2.399126] can: broadcast manager protocol (rev 20170425 t)
> [ 2.404869] can: netlink gateway (rev 20170425) max_hops=1
> [ 2.410989] Key type dns_resolver registered
> [ 2.420041] Registering SWP/SWPB emulation handler
> [ 2.426337] Loading compiled-in X.509 certificates
> [ 2.505422] imx-media: subdev ipu1_csi0_mux bound
> [ 2.511142] imx-media: subdev ipu2_csi1_mux bound
> [ 2.515930] imx-media: imx6-mipi-csi2:4 -> ipu2_csi1_mux:0
> [ 2.518384] random: fast init done
> [ 2.521600] imx-media: imx6-mipi-csi2:1 -> ipu1_csi0_mux:0
> [ 2.530561] imx-media: ov5640 2-003c:0 -> imx6-mipi-csi2:0
> [ 2.536094] imx-media: ipu2_csi1:1 -> ipu2_ic_prp:0
> [ 2.541052] imx-media: ipu2_csi1:1 -> ipu2_vdic:0
> [ 2.545801] imx-media: ipu2_csi1_mux:2 -> ipu2_csi1:0
> [ 2.550932] imx-media: ipu2_csi0:1 -> ipu2_ic_prp:0
> [ 2.555837] imx-media: ipu2_csi0:1 -> ipu2_vdic:0
> [ 2.560629] imx-media: imx6-mipi-csi2:3 -> ipu2_csi0:0
> [ 2.565800] imx-media: ipu1_csi1:1 -> ipu1_ic_prp:0
> [ 2.570750] imx-media: ipu1_csi1:1 -> ipu1_vdic:0
> [ 2.575497] imx-media: imx6-mipi-csi2:2 -> ipu1_csi1:0
> [ 2.580716] imx-media: ipu1_csi0:1 -> ipu1_ic_prp:0
> [ 2.585623] imx-media: ipu1_csi0:1 -> ipu1_vdic:0
> [ 2.590411] imx-media: ipu1_csi0_mux:2 -> ipu1_csi0:0
> [ 2.595499] imx-media: ipu2_ic_prp:1 -> ipu2_ic_prpenc:0
> [ 2.600901] imx-media: ipu2_ic_prp:2 -> ipu2_ic_prpvf:0
> [ 2.606159] imx-media: ipu1_ic_prp:1 -> ipu1_ic_prpenc:0
> [ 2.611548] imx-media: ipu1_ic_prp:2 -> ipu1_ic_prpvf:0
> [ 2.616803] imx-media: ipu2_vdic:2 -> ipu2_ic_prp:0
> [ 2.621754] imx-media: ipu1_vdic:2 -> ipu1_ic_prp:0
> [ 2.637015] imx_thermal tempmon: Industrial CPU temperature grade
> -
> max:105C critical:100C passive:95C
> [ 2.650475] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system
> clock
> to 1970-01-01 00:00:00 UTC (0)
> [ 2.659880] cfg80211: Loading compiled-in X.509 certificates for
> regulatory database
> [ 2.674031] cfg80211: Loaded X.509 cert 'sforshee:
> 00b28ddf47aef9cea7'
> [ 2.682013] platform regulatory.0: Direct firmware load for
> regulatory.db failed with error -2
> [ 2.690851] cfg80211: failed to load regulatory.db
> [ 2.695737] ALSA device list:
> [ 2.698762] No soundcards found.
> [ 3.592224] EXT4-fs (mmcblk0p2): recovery complete
> [ 3.602020] EXT4-fs (mmcblk0p2): mounted filesystem with ordered
> data mode. Opts: (null)
> [ 3.610371] VFS: Mounted root (ext4 filesystem) on device 179:2.
> [ 3.618708] devtmpfs: mounted
> [ 3.624665] Freeing unused kernel memory: 1024K
> [ 3.743951] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
> Starting logging: OK
> Initializing random number generator... [ 3.897748] random: dd:
> uninitialized urandom read (512 bytes read)
> done.
> Starting network: OK
>
> Welcome to Engicam i.CoreM6 Quad/Dual/DualLite/Solo
> buildroot login: root
> # media-ctl -l "'ov5640 2-003c':0 -> 'imx6-mipi-csi2':0[1]"
> # media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]"
> # media-ctl -l "'ipu1_csi1':1 -> 'ipu1_ic_prp':0[1]"
> # media-ctl -l "'ipu1_ic_prp':1 -> 'ipu1_ic_prpenc':0[1]"
> # media-ctl -l "'ipu1_ic_prpenc':1 -> 'ipu1_ic_prpenc capture':0[1]"
> # media-ctl -V "'ov5640 2-003c':0 [fmt:UYVY2X8/640x480 field:none]"
> # media-ctl -V "'imx6-mipi-csi2':2 [fmt:UYVY2X8/640x480 field:none]"
> # media-ctl -V "'ipu1_csi1':1 [fmt:AYUV32/640x480 field:none]"
> # media-ctl -V "'ipu1_ic_prp':1 [fmt:AYUV32/640x480 field:none]"
> # media-ctl -V "'ipu1_ic_prpenc':1 [fmt:AYUV32/640x480 field:none]"
> # med# media-ctl -p
> Media controller API version 4.17.0
>
> Media device information
> ------------------------
> driver imx-media
> model imx-media
> serial
> bus info
> hw revision 0x0
> driver version 4.17.0
>
> Device topology
> - entity 1: ov5640 2-003c (1 pad, 1 link)
> type V4L2 subdev subtype Sensor flags 0
> device node name /dev/v4l-subdev0
> pad0: Source
> [fmt:UYVY8_2X8/640x480 field:none]
> -> "imx6-mipi-csi2":0 [ENABLED]
>
> - entity 3: ipu1_vdic (3 pads, 3 links)
> type V4L2 subdev subtype Unknown flags 0
> device node name /dev/v4l-subdev1
> pad0: Sink
> [fmt:AYUV8_1X32/640x480 field:none]
> <- "ipu1_csi0":1 []
> <- "ipu1_csi1":1 []
> pad1: Sink
> [fmt:UYVY8_2X8/640x480 field:none]
> pad2: Source
> [fmt:AYUV8_1X32/640x480 field:none]
> -> "ipu1_ic_prp":0 []
>
> - entity 7: ipu2_vdic (3 pads, 3 links)
> type V4L2 subdev subtype Unknown flags 0
> device node name /dev/v4l-subdev2
> pad0: Sink
> [fmt:AYUV8_1X32/640x480 field:none]
> <- "ipu2_csi0":1 []
> <- "ipu2_csi1":1 []
> pad1: Sink
> [fmt:UYVY8_2X8/640x480 field:none]
> pad2: Source
> [fmt:AYUV8_1X32/640x480 field:none]
> -> "ipu2_ic_prp":0 []
>
> - entity 11: ipu1_ic_prp (3 pads, 5 links)
> type V4L2 subdev subtype Unknown flags 0
> device node name /dev/v4l-subdev3
> pad0: Sink
> [fmt:AYUV8_1X32/640x480 field:none]
> <- "ipu1_vdic":2 []
> <- "ipu1_csi0":1 []
> <- "ipu1_csi1":1 [ENABLED]
> pad1: Source
> [fmt:AYUV8_1X32/640x480 field:none]
> -> "ipu1_ic_prpenc":0 [ENABLED]
> pad2: Source
> [fmt:AYUV8_1X32/640x480 field:none]
> -> "ipu1_ic_prpvf":0 []
>
> - entity 15: ipu1_ic_prpenc (2 pads, 2 links)
> type V4L2 subdev subtype Unknown flags 0
> device node name /dev/v4l-subdev4
> pad0: Sink
> [fmt:AYUV8_1X32/640x480 field:none]
> <- "ipu1_ic_prp":1 [ENABLED]
> pad1: Source
> [fmt:AYUV8_1X32/640x480 field:none]
> -> "ipu1_ic_prpenc capture":0 [ENABLED]
>
> - entity 18: ipu1_ic_prpenc capture (1 pad, 1 link)
> type Node subtype V4L flags 0
> device node name /dev/video0
> pad0: Sink
> <- "ipu1_ic_prpenc":1 [ENABLED]
>
> - entity 24: ipu1_ic_prpvf (2 pads, 2 links)
> type V4L2 subdev subtype Unknown flags 0
> device node name /dev/v4l-subdev5
> pad0: Sink
> [fmt:AYUV8_1X32/640x480 field:none]
> <- "ipu1_ic_prp":2 []
> pad1: Source
> [fmt:AYUV8_1X32/640x480 field:none]
> -> "ipu1_ic_prpvf capture":0 []
>
> - entity 27: ipu1_ic_prpvf capture (1 pad, 1 link)
> type Node subtype V4L flags 0
> device node name /dev/video1
> pad0: Sink
> <- "ipu1_ic_prpvf":1 []
>
> - entity 33: ipu2_ic_prp (3 pads, 5 links)
> type V4L2 subdev subtype Unknown flags 0
> device node name /dev/v4l-subdev6
> pad0: Sink
> [fmt:AYUV8_1X32/640x480 field:none]
> <- "ipu2_vdic":2 []
> <- "ipu2_csi0":1 []
> <- "ipu2_csi1":1 []
> pad1: Source
> [fmt:AYUV8_1X32/640x480 field:none]
> -> "ipu2_ic_prpenc":0 []
> pad2: Source
> [fmt:AYUV8_1X32/640x480 field:none]
> -> "ipu2_ic_prpvf":0 []
>
> - entity 37: ipu2_ic_prpenc (2 pads, 2 links)
> type V4L2 subdev subtype Unknown flags 0
> device node name /dev/v4l-subdev7
> pad0: Sink
> [fmt:AYUV8_1X32/640x480 field:none]
> <- "ipu2_ic_prp":1 []
> pad1: Source
> [fmt:AYUV8_1X32/640x480 field:none]
> -> "ipu2_ic_prpenc capture":0 []
>
> - entity 40: ipu2_ic_prpenc capture (1 pad, 1 link)
> type Node subtype V4L flags 0
> device node name /dev/video2
> pad0: Sink
> <- "ipu2_ic_prpenc":1 []
>
> - entity 46: ipu2_ic_prpvf (2 pads, 2 links)
> type V4L2 subdev subtype Unknown flags 0
> device node name /dev/v4l-subdev8
> pad0: Sink
> [fmt:AYUV8_1X32/640x480 field:none]
> <- "ipu2_ic_prp":2 []
> pad1: Source
> [fmt:AYUV8_1X32/640x480 field:none]
> -> "ipu2_ic_prpvf capture":0 []
>
> - entity 49: ipu2_ic_prpvf capture (1 pad, 1 link)
> type Node subtype V4L flags 0
> device node name /dev/video3
> pad0: Sink
> <- "ipu2_ic_prpvf":1 []
>
> - entity 55: ipu1_csi0 (3 pads, 4 links)
> type V4L2 subdev subtype Unknown flags 0
> device node name /dev/v4l-subdev9
> pad0: Sink
> [fmt:UYVY8_2X8/640x480 field:none
> crop.bounds:(0,0)/640x480
> crop:(0,0)/640x480
> compose.bounds:(0,0)/640x480
> compose:(0,0)/640x480]
> <- "ipu1_csi0_mux":2 []
> pad1: Source
> [fmt:AYUV8_1X32/640x480 field:none]
> -> "ipu1_ic_prp":0 []
> -> "ipu1_vdic":0 []
> pad2: Source
> [fmt:AYUV8_1X32/640x480 field:none]
> -> "ipu1_csi0 capture":0 []
>
> - entity 59: ipu1_csi0 capture (1 pad, 1 link)
> type Node subtype V4L flags 0
> device node name /dev/video4
> pad0: Sink
> <- "ipu1_csi0":2 []
>
> - entity 65: ipu1_csi1 (3 pads, 4 links)
> type V4L2 subdev subtype Unknown flags 0
> device node name /dev/v4l-subdev10
> pad0: Sink
> [fmt:UYVY8_2X8/640x480 field:none
> crop.bounds:(0,0)/640x480
> crop:(0,0)/640x480
> compose.bounds:(0,0)/640x480
> compose:(0,0)/640x480]
> <- "imx6-mipi-csi2":2 [ENABLED]
> pad1: Source
> [fmt:AYUV8_1X32/640x480 field:none]
> -> "ipu1_ic_prp":0 [ENABLED]
> -> "ipu1_vdic":0 []
> pad2: Source
> [fmt:AYUV8_1X32/640x480 field:none]
> -> "ipu1_csi1 capture":0 []
>
> - entity 69: ipu1_csi1 capture (1 pad, 1 link)
> type Node subtype V4L flags 0
> device node name /dev/video5
> pad0: Sink
> <- "ipu1_csi1":2 []
>
> - entity 75: ipu2_csi0 (3 pads, 4 links)
> type V4L2 subdev subtype Unknown flags 0
> device node name /dev/v4l-subdev11
> pad0: Sink
> [fmt:UYVY8_2X8/640x480 field:none
> crop.bounds:(0,0)/640x480
> crop:(0,0)/640x480
> compose.bounds:(0,0)/640x480
> compose:(0,0)/640x480]
> <- "imx6-mipi-csi2":3 []
> pad1: Source
> [fmt:AYUV8_1X32/640x480 field:none]
> -> "ipu2_ic_prp":0 []
> -> "ipu2_vdic":0 []
> pad2: Source
> [fmt:AYUV8_1X32/640x480 field:none]
> -> "ipu2_csi0 capture":0 []
>
> - entity 79: ipu2_csi0 capture (1 pad, 1 link)
> type Node subtype V4L flags 0
> device node name /dev/video6
> pad0: Sink
> <- "ipu2_csi0":2 []
>
> - entity 85: ipu2_csi1 (3 pads, 4 links)
> type V4L2 subdev subtype Unknown flags 0
> device node name /dev/v4l-subdev12
> pad0: Sink
> [fmt:UYVY8_2X8/640x480 field:none
> crop.bounds:(0,0)/640x480
> crop:(0,0)/640x480
> compose.bounds:(0,0)/640x480
> compose:(0,0)/640x480]
> <- "ipu2_csi1_mux":2 []
> pad1: Source
> [fmt:AYUV8_1X32/640x480 field:none]
> -> "ipu2_ic_prp":0 []
> -> "ipu2_vdic":0 []
> pad2: Source
> [fmt:AYUV8_1X32/640x480 field:none]
> -> "ipu2_csi1 capture":0 []
>
> - entity 89: ipu2_csi1 capture (1 pad, 1 link)
> type Node subtype V4L flags 0
> device node name /dev/video7
> pad0: Sink
> <- "ipu2_csi1":2 []
>
> - entity 95: imx6-mipi-csi2 (5 pads, 5 links)
> type V4L2 subdev subtype Unknown flags 0
> device node name /dev/v4l-subdev13
> pad0: Sink
> [fmt:UYVY8_2X8/640x480 field:none]
> <- "ov5640 2-003c":0 [ENABLED]
> pad1: Source
> [fmt:UYVY8_2X8/640x480 field:none]
> -> "ipu1_csi0_mux":0 []
> pad2: Source
> [fmt:UYVY8_2X8/640x480 field:none]
> -> "ipu1_csi1":0 [ENABLED]
> pad3: Source
> [fmt:UYVY8_2X8/640x480 field:none]
> -> "ipu2_csi0":0 []
> pad4: Source
> [fmt:UYVY8_2X8/640x480 field:none]
> -> "ipu2_csi1_mux":0 []
>
> - entity 101: ipu1_csi0_mux (3 pads, 2 links)
> type V4L2 subdev subtype Unknown flags 0
> device node name /dev/v4l-subdev14
> pad0: Sink
> [fmt:unknown/0x0]
> <- "imx6-mipi-csi2":1 []
> pad1: Sink
> [fmt:unknown/0x0]
> pad2: Source
> [fmt:unknown/0x0]
> -> "ipu1_csi0":0 []
>
> - entity 105: ipu2_csi1_mux (3 pads, 2 links)
> type V4L2 subdev subtype Unknown flags 0
> device node name /dev/v4l-subdev15
> pad0: Sink
> [fmt:unknown/0x0]
> <- "imx6-mipi-csi2":4 []
> pad1: Sink
> [fmt:unknown/0x0]
> pad2: Source
> [fmt:unknown/0x0]
> -> "ipu2_csi1":0 []
>
> # GST_DEBUG="v4l2*:5" gst-launch-1.0 -v v4l2src device=/dev/video1 !
> \
> > autovideosink
>
> 0:00:01.086281666 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l1
> 0:00:01.087369666 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l5
> 0:00:01.088496000 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l.
> 0:00:01.089540333 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4lR
> 0:00:01.090494666 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4lH
> 0:00:01.091657666 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l4
> 0:00:01.092745000 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l
> 0:00:01.093703333 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l
> 0:00:01.094854000 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l
> 0:00:01.095815000 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l
> 0:00:01.096818666 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4lB
> 0:00:01.097819000 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l8
> 0:00:01.098771000 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l
> 0:00:01.099798666 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l1
> 0:00:01.100776666 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4lV
> 0:00:01.101755333 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4lY
> 0:00:01.102771666 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4lP
> 0:00:01.103712000 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l4
> 0:00:01.104720000 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4lO
> 0:00:01.105697000 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4lP
> 0:00:01.106629666 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l4
> 0:00:01.107681666 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l4
> 0:00:01.108660666 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l2
> 0:00:01.442437333 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l0
> 0:00:01.444673333 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l2
> 0:00:01.446842000 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l2
> 0:00:01.449084000 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l4
> Setting pipeline to PAUSED ...
> 0:00:01.680823000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:524:gst_v4l2_open:<v4l2src01
> 0:00:01.681953333 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:69:gst_v4l2_get_capabilities
> 0:00:01.683098666 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:140:gst_v4l2_fill_lists:<v4s
> 0:00:01.684056666 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:143:gst_v4l2_fill_lists:<v4s
> 0:00:01.685201000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:215:gst_v4l2_fill_lists:<v4s
> 0:00:01.686159333 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> 0:00:01.687207666 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4C
> 0:00:01.688183666 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> 0:00:01.689155333 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4M
> 0:00:01.690142000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> 0:00:01.691114000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4P
> 0:00:01.692080000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> 0:00:01.693073000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4R
> 0:00:01.694043000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> 0:00:01.695760000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4L
> 0:00:01.696736333 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> 0:00:01.697708000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4G
> 0:00:01.698699000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> 0:00:01.699667000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4H
> 0:00:01.700633000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> 0:00:01.701623666 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4I
> 0:00:01.702591000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> 0:00:01.703554333 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4K
> 0:00:01.704604000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> 0:00:01.705576666 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4M
> 0:00:01.706567000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> 0:00:02.040204667 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4B
> 0:00:02.042194667 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> 0:00:02.044190000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4G
> 0:00:02.046338333 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> 0:00:02.048327667 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4H
> 0:00:02.050296000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> 0:00:02.052385000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4K
> 0:00:02.054376000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> 0:00:02.056461333 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4L
> 0:00:02.058434000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> 0:00:02.060423667 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4c
> 0:00:02.062382667 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:263:gst_v4l2_fill_lists:<v4s
> 0:00:02.064291333 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:283:gst_v4l2_fill_lists:<v40
> 0:00:02.066224667 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:292:gst_v4l2_fill_lists:<v4.
> 0:00:02.067190333 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:283:gst_v4l2_fill_lists:<v40
> 0:00:02.068174333 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:300:gst_v4l2_fill_lists:<v40
> 0:00:02.069141000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:283:gst_v4l2_fill_lists:<v40
> 0:00:02.070113000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:305:gst_v4l2_fill_lists:<v4d
> 0:00:02.071088333 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:456:gst_v4l2_fill_lists:<v4e
> 0:00:02.072040000 185 0x1dce880 INFO v4l2
> v4l2_calls.c:592:gst_v4l2_open:<v4l2src0y
> 0:00:02.073017333 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:804:gst_v4l2_set_default)
> 0:00:02.074010667 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:740:gst_v4l2_get_norm:<v4l2m
> 0:00:02.075021000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:754:gst_v4l2_get_norm: Fail1
> 0:00:02.076012000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:1027:gst_v4l2_get_input:<v4t
> Pipeline is live and does not need PREROLL ...
> 0:00:02.080105333 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:1109:gst_v4l2_object_fil.
> <v4l2src0> getting src format enumerations
> 0:00:02.412981333 185 0x1ec39b0 INFO New clock:
> GstSystemClock
> v4l2
> gstv4l2object.c:1146:gst_v4l2_object_fill_format_list:<v4l2src0>
> got 7 format(s):
> 0:00:02.415407667 185 0x1ec39b0 INFO v4l2
> gstv4l2object.c:1152:gst_v4l2_object_filV
> 0:00:02.417531667 185 0x1ec39b0 INFO v4l2
> gstv4l2object.c:1152:gst_v4l2_object_filY
> 0:00:02.419703667 185 0x1ec39b0 INFO v4l2
> gstv4l2object.c:1152:gst_v4l2_object_filP
> 0:00:02.421860000 185 0x1ec39b0 INFO v4l2
> gstv4l2object.c:1152:gst_v4l2_object_fil2
> 0:00:02.424022667 185 0x1ec39b0 INFO v4l2
> gstv4l2object.c:1152:gst_v4l2_object_fil2
> 0:00:02.426295000 185 0x1ec39b0 INFO v4l2
> gstv4l2object.c:1152:gst_v4l2_object_fil6
> 0:00:02.428481333 185 0x1ec39b0 INFO v4l2
> gstv4l2object.c:1152:gst_v4l2_object_fil2
> 0:00:02.430728333 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:2564:gst_v4l2_object_proV
> 0:00:02.432985333 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:2691:gst_v4l2_object_pro)
> 0:00:02.436117000 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:2564:gst_v4l2_object_proY
> 0:00:02.437252333 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:2691:gst_v4l2_object_pro)
> 0:00:02.438579000 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:2564:gst_v4l2_object_proP
> 0:00:02.439656000 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:2691:gst_v4l2_object_pro)
> 0:00:02.441016667 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:2564:gst_v4l2_object_pro2
> 0:00:02.442092333 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:2691:gst_v4l2_object_pro)
> 0:00:02.443443333 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:2564:gst_v4l2_object_pro2
> 0:00:02.444626667 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:2691:gst_v4l2_object_pro)
> 0:00:02.445990667 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:2564:gst_v4l2_object_pro6
> 0:00:02.447063667 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:2691:gst_v4l2_object_pro)
> 0:00:02.448410333 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:2564:gst_v4l2_object_pro2
> 0:00:02.782148333 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:2691:gst_v4l2_object_pro)
> 0:00:02.785264333 185 0x1ec39b0 INFO v4l2
> gstv4l2object.c:3967:gst_v4l2_object_get}
> 0:00:02.788800000 185 0x1ec39b0 DEBUG v4l2src
> gstv4l2src.c:300:gst_v4l2src_negotiate:<}
> 0:00:02.792207000 185 0x1ec39b0 DEBUG v4l2src
> gstv4l2src.c:308:gst_v4l2src_negotiate:<]
> 0:00:02.795419000 185 0x1ec39b0 DEBUG v4l2src
> gstv4l2src.c:316:gst_v4l2src_negotiate:<}
> 0:00:03.132052667 185 0x1ec39b0 DEBUG v4l2src
> gstv4l2src.c:256:gst_v4l2src_fixate:<v4l}
> 0:00:03.134399667 185 0x1ec39b0 DEBUG v4l2src
> gstv4l2src.c:282:gst_v4l2src_fixate:<v4l}
> 0:00:03.136800667 185 0x1ec39b0 DEBUG v4l2src
> gstv4l2src.c:367:gst_v4l2src_negotiate:<1
> 0:00:03.139067333 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:3887:gst_v4l2_object_stog
> 0:00:03.141452000 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:3176:gst_v4l2_object_seto
> 0:00:03.143608667 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:3310:gst_v4l2_object_set0
> 0:00:03.146025333 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:3361:gst_v4l2_object_set1
> 0:00:03.148229000 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:3370:gst_v4l2_object_set0
> 0:00:03.150373667 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:3404:gst_v4l2_object_set1
> 0:00:03.152589667 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:3414:gst_v4l2_object_set0
> 0:00:03.155250667 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:3455:gst_v4l2_object_set1
> 0:00:03.156584667 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:3472:gst_v4l2_object_set1
> 0:00:03.157659333 185 0x1ec39b0 INFO v4l2
> gstv4l2object.c:3504:gst_v4l2_object_set1
> 0:00:03.491432000 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:2960:gst_v4l2_object_ext0
> 0:00:03.493645333 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:3071:gst_v4l2_object_sav0
> 0:00:03.496027333 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:2843:gst_v4l2_object_setm
> 0:00:03.498180000 185 0x1ec39b0 INFO v4l2
> gstv4l2object.c:2867:gst_v4l2_object_set2
> 0:00:03.502772000 185 0x1ec39b0 DEBUG v4l2bufferpool
> gstv4l2bufferpool.c:509:gst_v4l2_buffer_;
> 0:00:03.505283333 185 0x1ec39b0 INFO v4l2bufferpool
> gstv4l2bufferpool.c:557:gst_v4l2_buffer_2
> 0:00:03.507120000 185 0x1ec39b0 INFO v4l2bufferpool
> gstv4l2bufferpool.c:570:gst_v4l2_buffer_2
> /GstPipeline:pipeline0/GstV4l2Src:v4l2src0.GstPad:src: caps =
> video/x-raw, format=(string)YUY2, width=(i1
> /GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0.GstGhostPad:si
> nk.GstProxyPad:proxypad0:
> caps = vi1
> /GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0/GstKMSSink:aut
> ovideosink0-actual-sink-kms.GstPad:1
> 0:00:03/GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0.GstGhos
> tPad:sink:
> caps = video/x-raw, form1
> .512440000 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:3985:gst_v4l2_object_decide_alln
> 0:00:03.513556667 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:4011:gst_v4l2_object_dec>
> 0:00:03.514745667 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:4069:gst_v4l2_object_dec>
> 0:00:03.515889000 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:4134:gst_v4l2_object_deca
> 0:00:03.516969667 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:4143:gst_v4l2_object_dec;
> 0:00:03.851350333 185 0x1ec39b0 DEBUG v4l2bufferpool
> gstv4l2bufferpool.c:509:gst_v4l2_buffer_2
> ams)NULL, options=(string)< GstBufferPoolOptionVideoMeta >;
> 0:00:03.853620333 185 0x1ec39b0 INFO v4l2bufferpool
> gstv4l2bufferpool.c:570:gst_v4l2_buffer_2
> 0:00:03.855780667 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:4150:gst_v4l2_object_dec;
> 0:00:03.858430000 185 0x1ec39b0 DEBUG v4l2bufferpool
> gstv4l2bufferpool.c:509:gst_v4l2_buffer_;
> 0:00:03.861572333 185 0x1ec39b0 DEBUG v4l2bufferpool
> gstv4l2bufferpool.c:707:gst_v4l2_buffer_l
> 0:00:03.863468333 185 0x1ec39b0 DEBUG v4l2bufferpool
> gstv4l2bufferpool.c:737:gst_v4l2_buffer_s
> 0:00:03.918861000 185 0x1ec39b0 DEBUG v4l2allocator
> gstv4l2allocator.c:706:gst_v4l2_allocatod
> 0:00:03.943783333 185 0x1ec39b0 DEBUG v4l2bufferpool
> gstv4l2bufferpool.c:1389:gst_v4l2_buffer8
> 0:00:03.946129333 185 0x1ec39b0 DEBUG v4l2bufferpool
> gstv4l2bufferpool.c:1389:gst_v4l2_buffer8
> 0:00:03.948065000 185 0x1ec39b0 DEBUG v4l2bufferpool
> gstv4l2bufferpool.c:1389:gst_v4l2_buffer8
> 0:00:03.950006000 185 0x1ec39b0 DEBUG v4l2bufferpool
> gstv4l2bufferpool.c:952:gst_v4l2_buffer_g
> 0:00:03.996241333 185 0x1ec39b0 ERROR v4l2bufferpool
> gstv4l2bufferpool.c:641:gst_v4l2_buffer_)
> 0:00:03.998199667 185 0x1ec39b0 DEBUG v4l2bufferpool
> gstv4l2bufferpool.c:1311:gst_v4l2_buffere
> 0:00:04.000463000 185 0x1ec39b0 WARN v4l2bufferpool
> gstv4l2bufferpool.c:1064:gst_v4l2_buffer)
> 0:00:04.004649333 185 0x1ec39b0 DEBUG v4l2bufferpool
> gstv4l2bufferpool.c:1283:gst_v4l2_bufferr
> 0:00:04.005853333 185 0x1ec39b0 WARN v4l2src
> gstv4l2src.c:866:gst_v4l2src_create:<v4lr
> ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Could
> not read from resource.
> Additional debug info:
> gstv4l2bufferpool.c(1064): gst_v4l2_buffer_pool_poll ():
> /GstPipeline:pipeline0/GstV4l2Src:v4l2src0:
> poll error 1: Resource temporarily unavailable (11)
> Execution ended after 0:00:01.606871334
> Setting pipeline to PAUSED ...
> 0:00:04.022385000 185 0x1dce880 DEBUG v4l2bufferpool
> gstv4l2bufferpool.c:931:gst_v4l2_buffer_g
> Setting pipeline to READY ...
> 0:00:04.024850667 185 0x1dce880 DEBUG v4l2bufferpool
> gstv4l2bufferpool.c:879:gst_v4l2_buffer_l
> 0:00:04.026764000 185 0x1dce880 DEBUG v4l2allocator
> gstv4l2allocator.c:757:gst_v4l2_allocator
> 0:00:04.028598333 185 0x1dce880 DEBUG v4l2allocator
> gstv4l2allocator.c:765:gst_v4l2_allocatoe
> 0:00:04.362785667 185 0x1dce880 WARN v4l2bufferpool
> gstv4l2bufferpool.c:918:gst_v4l2_buffer_g
> 0:00:04.364712333 185 0x1dce880 DEBUG v4l2bufferpool
> gstv4l2bufferpool.c:952:gst_v4l2_buffer_g
> 0:00:04.366504333 185 0x1dce880 DEBUG v4l2bufferpool
> gstv4l2bufferpool.c:629:gst_v4l2_buffer_g
> 0:00:04.368607000 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:3887:gst_v4l2_object_stog
> 0:00:04.370713333 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:3895:gst_v4l2_object_stol
> 0:00:04.372809333 185 0x1dce880 DEBUG v4l2bufferpool
> gstv4l2bufferpool.c:931:gst_v4l2_buffer_g
> 0:00:04.374732000 185 0x1dce880 DEBUG v4l2bufferpool
> gstv4l2bufferpool.c:879:gst_v4l2_buffer_l
> 0:00:04.376541000 185 0x1dce880 DEBUG v4l2bufferpool
> gstv4l2bufferpool.c:663:gst_v4l2_buffer_g
> 0:00:04.378334000 185 0x1dce880 DEBUG v4l2allocator
> gstv4l2allocator.c:757:gst_v4l2_allocator
> Setting pipeline to NULL ...
> 0:00:04.394764333 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:716:gst_v4l2_close:<v4l2src1
> 0:00:04.395897667 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:464:gst_v4l2_empty_lists:<vs
> Freeing pipeline ...
>
> [1] https://linuxtv.org/downloads/v4l-dvb-apis/v4l-drivers/imx.html#s
> abresd-with-mipi-csi-2-ov5640
> [2] https://paste.ubuntu.com/p/CTvFqdbyMW/
>
> Jagan.
>
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 195 bytes --]
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
2018-05-31 16:10 ` Nicolas Dufresne
@ 2018-05-31 16:25 ` Jagan Teki
0 siblings, 0 replies; 38+ messages in thread
From: Jagan Teki @ 2018-05-31 16:25 UTC (permalink / raw)
To: Nicolas Dufresne
Cc: Philipp Zabel, Steve Longerbeam, Fabio Estevam,
Discussion of the development of and with GStreamer, linux-media,
linux-kernel
On Thu, May 31, 2018 at 9:40 PM, Nicolas Dufresne <nicolas@ndufresne.ca> wrote:
> Le jeudi 31 mai 2018 à 20:39 +0530, Jagan Teki a écrit :
>> Hi All,
>>
>> I'm trying to verify MIPI-CSI2 OV5640 camera on i.MX6 platform with
>> Mainline Linux.
>>
>> I've followed these[1] instructions to configure MC links and pads
>> based on the probing details from dmesg and trying to capture
>> ipu1_ic_prpenc capture (/dev/video1) but it's not working.
>>
>> Can anyone help me to verify whether I configured all the details
>> properly if not please suggest.
>>
>> I'm pasting full log here, so-that anyone can comment in line and dt
>> changes are at [2]
>
> Be aware that because all of the provided GStreamer logs lines are
> truncated, I won't be able to comment on the issue.
Sorry for the confusion, here is the gst log [3] and dmesg + media-ctl [4]
[3] https://paste.ubuntu.com/p/NpG8ynb8nQ/
[4] https://paste.ubuntu.com/p/VGX3sYdvVW/
Jagan.
--
Jagan Teki
Senior Linux Kernel Engineer | Amarula Solutions
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
2018-05-31 15:09 i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux Jagan Teki
2018-05-31 16:10 ` Nicolas Dufresne
@ 2018-05-31 19:06 ` Philipp Zabel
2018-06-01 5:19 ` Jagan Teki
2018-09-20 14:56 ` jacopo mondi
2 siblings, 1 reply; 38+ messages in thread
From: Philipp Zabel @ 2018-05-31 19:06 UTC (permalink / raw)
To: Jagan Teki
Cc: Steve Longerbeam, Fabio Estevam,
Discussion of the development of and with GStreamer, linux-media,
linux-kernel
Hi Jagan,
On Thu, May 31, 2018 at 08:39:20PM +0530, Jagan Teki wrote:
> Hi All,
>
> I'm trying to verify MIPI-CSI2 OV5640 camera on i.MX6 platform with
> Mainline Linux.
>
> I've followed these[1] instructions to configure MC links and pads
> based on the probing details from dmesg and trying to capture
> ipu1_ic_prpenc capture (/dev/video1) but it's not working.
>
> Can anyone help me to verify whether I configured all the details
> properly if not please suggest.
>
> I'm pasting full log here, so-that anyone can comment in line and dt
> changes are at [2]
>
> Log:
> -----
[...]
> # media-ctl -l "'ov5640 2-003c':0 -> 'imx6-mipi-csi2':0[1]"
> # media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]"
> # media-ctl -l "'ipu1_csi1':1 -> 'ipu1_ic_prp':0[1]"
> # media-ctl -l "'ipu1_ic_prp':1 -> 'ipu1_ic_prpenc':0[1]"
> # media-ctl -l "'ipu1_ic_prpenc':1 -> 'ipu1_ic_prpenc capture':0[1]"
Here you configure a pipeline that ends at ipu1 prpenc capture ...
> # med# media-ctl -p
[...]
> - entity 18: ipu1_ic_prpenc capture (1 pad, 1 link)
> type Node subtype V4L flags 0
> device node name /dev/video0
... which is /dev/video0 ...
[...]
> - entity 27: ipu1_ic_prpvf capture (1 pad, 1 link)
> type Node subtype V4L flags 0
> device node name /dev/video1
... not /dev/video1 ...
[...]
> # GST_DEBUG="v4l2*:5" gst-launch-1.0 -v v4l2src device=/dev/video1 ! \
> > autovideosink
... and then you try to capture from prpvf, which is not part of a
configured pipeline.
regards
Philipp
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
2018-05-31 19:06 ` Philipp Zabel
@ 2018-06-01 5:19 ` Jagan Teki
2018-06-01 9:53 ` Sakari Ailus
2018-06-29 21:46 ` Fabio Estevam
0 siblings, 2 replies; 38+ messages in thread
From: Jagan Teki @ 2018-06-01 5:19 UTC (permalink / raw)
To: Philipp Zabel
Cc: Steve Longerbeam, Fabio Estevam,
Discussion of the development of and with GStreamer, linux-media,
linux-kernel
Hi Philipp,
On Fri, Jun 1, 2018 at 12:36 AM, Philipp Zabel <pza@pengutronix.de> wrote:
> Hi Jagan,
>
> On Thu, May 31, 2018 at 08:39:20PM +0530, Jagan Teki wrote:
>> Hi All,
>>
>> I'm trying to verify MIPI-CSI2 OV5640 camera on i.MX6 platform with
>> Mainline Linux.
>>
>> I've followed these[1] instructions to configure MC links and pads
>> based on the probing details from dmesg and trying to capture
>> ipu1_ic_prpenc capture (/dev/video1) but it's not working.
>>
>> Can anyone help me to verify whether I configured all the details
>> properly if not please suggest.
>>
>> I'm pasting full log here, so-that anyone can comment in line and dt
>> changes are at [2]
>>
>> Log:
>> -----
> [...]
>> # media-ctl -l "'ov5640 2-003c':0 -> 'imx6-mipi-csi2':0[1]"
>> # media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]"
>> # media-ctl -l "'ipu1_csi1':1 -> 'ipu1_ic_prp':0[1]"
>> # media-ctl -l "'ipu1_ic_prp':1 -> 'ipu1_ic_prpenc':0[1]"
>> # media-ctl -l "'ipu1_ic_prpenc':1 -> 'ipu1_ic_prpenc capture':0[1]"
>
> Here you configure a pipeline that ends at ipu1 prpenc capture ...
>
>> # med# media-ctl -p
> [...]
>> - entity 18: ipu1_ic_prpenc capture (1 pad, 1 link)
>> type Node subtype V4L flags 0
>> device node name /dev/video0
>
> ... which is /dev/video0 ...
>
> [...]
>> - entity 27: ipu1_ic_prpvf capture (1 pad, 1 link)
>> type Node subtype V4L flags 0
>> device node name /dev/video1
>
> ... not /dev/video1 ...
True, thanks for pointing it.
I actually tried even on video0 which I forgot to post the log [4].
Now I understand I'm trying for wrong device to capture look like
video0 which is ipu1 prepenc firing kernel oops. I'm trying to debug
this and let me know if have any suggestion to look into.
[ 56.800074] imx6-mipi-csi2: LP-11 timeout, phy_state = 0x000002b0
[ 57.369660] ipu1_ic_prpenc: EOF timeout
[ 57.849692] ipu1_ic_prpenc: wait last EOF timeout
[ 57.855703] ipu1_ic_prpenc: pipeline start failed with -110
[4] https://paste.ubuntu.com/p/rSdh9pfGXs/
Jagan.
--
Jagan Teki
Senior Linux Kernel Engineer | Amarula Solutions
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
2018-06-01 5:19 ` Jagan Teki
@ 2018-06-01 9:53 ` Sakari Ailus
2018-06-01 11:41 ` Jagan Teki
2018-06-29 21:46 ` Fabio Estevam
1 sibling, 1 reply; 38+ messages in thread
From: Sakari Ailus @ 2018-06-01 9:53 UTC (permalink / raw)
To: Jagan Teki
Cc: Philipp Zabel, Steve Longerbeam, Fabio Estevam,
Discussion of the development of and with GStreamer, linux-media,
linux-kernel
On Fri, Jun 01, 2018 at 10:49:56AM +0530, Jagan Teki wrote:
> Hi Philipp,
>
> On Fri, Jun 1, 2018 at 12:36 AM, Philipp Zabel <pza@pengutronix.de> wrote:
> > Hi Jagan,
> >
> > On Thu, May 31, 2018 at 08:39:20PM +0530, Jagan Teki wrote:
> >> Hi All,
> >>
> >> I'm trying to verify MIPI-CSI2 OV5640 camera on i.MX6 platform with
> >> Mainline Linux.
> >>
> >> I've followed these[1] instructions to configure MC links and pads
> >> based on the probing details from dmesg and trying to capture
> >> ipu1_ic_prpenc capture (/dev/video1) but it's not working.
> >>
> >> Can anyone help me to verify whether I configured all the details
> >> properly if not please suggest.
> >>
> >> I'm pasting full log here, so-that anyone can comment in line and dt
> >> changes are at [2]
> >>
> >> Log:
> >> -----
> > [...]
> >> # media-ctl -l "'ov5640 2-003c':0 -> 'imx6-mipi-csi2':0[1]"
> >> # media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]"
> >> # media-ctl -l "'ipu1_csi1':1 -> 'ipu1_ic_prp':0[1]"
> >> # media-ctl -l "'ipu1_ic_prp':1 -> 'ipu1_ic_prpenc':0[1]"
> >> # media-ctl -l "'ipu1_ic_prpenc':1 -> 'ipu1_ic_prpenc capture':0[1]"
> >
> > Here you configure a pipeline that ends at ipu1 prpenc capture ...
> >
> >> # med# media-ctl -p
> > [...]
> >> - entity 18: ipu1_ic_prpenc capture (1 pad, 1 link)
> >> type Node subtype V4L flags 0
> >> device node name /dev/video0
> >
> > ... which is /dev/video0 ...
> >
> > [...]
> >> - entity 27: ipu1_ic_prpvf capture (1 pad, 1 link)
> >> type Node subtype V4L flags 0
> >> device node name /dev/video1
> >
> > ... not /dev/video1 ...
>
> True, thanks for pointing it.
>
> I actually tried even on video0 which I forgot to post the log [4].
> Now I understand I'm trying for wrong device to capture look like
> video0 which is ipu1 prepenc firing kernel oops. I'm trying to debug
> this and let me know if have any suggestion to look into.
>
> [ 56.800074] imx6-mipi-csi2: LP-11 timeout, phy_state = 0x000002b0
> [ 57.369660] ipu1_ic_prpenc: EOF timeout
> [ 57.849692] ipu1_ic_prpenc: wait last EOF timeout
> [ 57.855703] ipu1_ic_prpenc: pipeline start failed with -110
I don't have the hardware but this looks like the host cannot detect the
LP-11 state on the sensor (both wires high?). Some sensors cannot do this
without starting streaming at the same time. I'd expect the same if there
are problems in lane configuration etc.
--
Sakari Ailus
e-mail: sakari.ailus@iki.fi
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
2018-06-01 9:53 ` Sakari Ailus
@ 2018-06-01 11:41 ` Jagan Teki
0 siblings, 0 replies; 38+ messages in thread
From: Jagan Teki @ 2018-06-01 11:41 UTC (permalink / raw)
To: Sakari Ailus
Cc: Philipp Zabel, Steve Longerbeam, Fabio Estevam,
Discussion of the development of and with GStreamer, linux-media,
linux-kernel
On Fri, Jun 1, 2018 at 3:23 PM, Sakari Ailus <sakari.ailus@iki.fi> wrote:
> On Fri, Jun 01, 2018 at 10:49:56AM +0530, Jagan Teki wrote:
>> Hi Philipp,
>>
>> On Fri, Jun 1, 2018 at 12:36 AM, Philipp Zabel <pza@pengutronix.de> wrote:
>> > Hi Jagan,
>> >
>> > On Thu, May 31, 2018 at 08:39:20PM +0530, Jagan Teki wrote:
>> >> Hi All,
>> >>
>> >> I'm trying to verify MIPI-CSI2 OV5640 camera on i.MX6 platform with
>> >> Mainline Linux.
>> >>
>> >> I've followed these[1] instructions to configure MC links and pads
>> >> based on the probing details from dmesg and trying to capture
>> >> ipu1_ic_prpenc capture (/dev/video1) but it's not working.
>> >>
>> >> Can anyone help me to verify whether I configured all the details
>> >> properly if not please suggest.
>> >>
>> >> I'm pasting full log here, so-that anyone can comment in line and dt
>> >> changes are at [2]
>> >>
>> >> Log:
>> >> -----
>> > [...]
>> >> # media-ctl -l "'ov5640 2-003c':0 -> 'imx6-mipi-csi2':0[1]"
>> >> # media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]"
>> >> # media-ctl -l "'ipu1_csi1':1 -> 'ipu1_ic_prp':0[1]"
>> >> # media-ctl -l "'ipu1_ic_prp':1 -> 'ipu1_ic_prpenc':0[1]"
>> >> # media-ctl -l "'ipu1_ic_prpenc':1 -> 'ipu1_ic_prpenc capture':0[1]"
>> >
>> > Here you configure a pipeline that ends at ipu1 prpenc capture ...
>> >
>> >> # med# media-ctl -p
>> > [...]
>> >> - entity 18: ipu1_ic_prpenc capture (1 pad, 1 link)
>> >> type Node subtype V4L flags 0
>> >> device node name /dev/video0
>> >
>> > ... which is /dev/video0 ...
>> >
>> > [...]
>> >> - entity 27: ipu1_ic_prpvf capture (1 pad, 1 link)
>> >> type Node subtype V4L flags 0
>> >> device node name /dev/video1
>> >
>> > ... not /dev/video1 ...
>>
>> True, thanks for pointing it.
>>
>> I actually tried even on video0 which I forgot to post the log [4].
>> Now I understand I'm trying for wrong device to capture look like
>> video0 which is ipu1 prepenc firing kernel oops. I'm trying to debug
>> this and let me know if have any suggestion to look into.
>>
>> [ 56.800074] imx6-mipi-csi2: LP-11 timeout, phy_state = 0x000002b0
>> [ 57.369660] ipu1_ic_prpenc: EOF timeout
>> [ 57.849692] ipu1_ic_prpenc: wait last EOF timeout
>> [ 57.855703] ipu1_ic_prpenc: pipeline start failed with -110
>
> I don't have the hardware but this looks like the host cannot detect the
> LP-11 state on the sensor (both wires high?). Some sensors cannot do this
> without starting streaming at the same time. I'd expect the same if there
> are problems in lane configuration etc.
You mean the lane configurations in hardware? but this sensor is
working with imx kernel. what do you mean by wires here? lanes.
Jagan.
--
Jagan Teki
Senior Linux Kernel Engineer | Amarula Solutions
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
2018-06-01 5:19 ` Jagan Teki
2018-06-01 9:53 ` Sakari Ailus
@ 2018-06-29 21:46 ` Fabio Estevam
2018-07-03 18:41 ` jacopo mondi
1 sibling, 1 reply; 38+ messages in thread
From: Fabio Estevam @ 2018-06-29 21:46 UTC (permalink / raw)
To: Jagan Teki, jacopo mondi
Cc: Philipp Zabel, Steve Longerbeam, Fabio Estevam,
Discussion of the development of and with GStreamer, linux-media,
linux-kernel
Hi Jagan,
On Fri, Jun 1, 2018 at 2:19 AM, Jagan Teki <jagan@amarulasolutions.com> wrote:
> I actually tried even on video0 which I forgot to post the log [4].
> Now I understand I'm trying for wrong device to capture look like
> video0 which is ipu1 prepenc firing kernel oops. I'm trying to debug
> this and let me know if have any suggestion to look into.
>
> [ 56.800074] imx6-mipi-csi2: LP-11 timeout, phy_state = 0x000002b0
> [ 57.369660] ipu1_ic_prpenc: EOF timeout
> [ 57.849692] ipu1_ic_prpenc: wait last EOF timeout
> [ 57.855703] ipu1_ic_prpenc: pipeline start failed with -110
Could you please test this series from Jacopo?
https://www.mail-archive.com/linux-media@vger.kernel.org/msg133191.html
It seems that it would fix this problem.
Thanks
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
2018-06-29 21:46 ` Fabio Estevam
@ 2018-07-03 18:41 ` jacopo mondi
2018-07-04 0:18 ` Fabio Estevam
2018-07-04 5:18 ` Jagan Teki
0 siblings, 2 replies; 38+ messages in thread
From: jacopo mondi @ 2018-07-03 18:41 UTC (permalink / raw)
To: Fabio Estevam
Cc: Jagan Teki, Philipp Zabel, Steve Longerbeam, Fabio Estevam,
Discussion of the development of and with GStreamer, linux-media,
linux-kernel
[-- Attachment #1: Type: text/plain, Size: 2507 bytes --]
Hi Fabio,
thanks for pointing Jagan to my series, but..
On Fri, Jun 29, 2018 at 06:46:39PM -0300, Fabio Estevam wrote:
> Hi Jagan,
>
> On Fri, Jun 1, 2018 at 2:19 AM, Jagan Teki <jagan@amarulasolutions.com> wrote:
>
> > I actually tried even on video0 which I forgot to post the log [4].
> > Now I understand I'm trying for wrong device to capture look like
> > video0 which is ipu1 prepenc firing kernel oops. I'm trying to debug
> > this and let me know if have any suggestion to look into.
> >
> > [ 56.800074] imx6-mipi-csi2: LP-11 timeout, phy_state = 0x000002b0
> > [ 57.369660] ipu1_ic_prpenc: EOF timeout
> > [ 57.849692] ipu1_ic_prpenc: wait last EOF timeout
> > [ 57.855703] ipu1_ic_prpenc: pipeline start failed with -110
>
> Could you please test this series from Jacopo?
> https://www.mail-archive.com/linux-media@vger.kernel.org/msg133191.html
>
> It seems that it would fix this problem.
... unfortunately it does not :(
I've been able to test on the same platform where Jagan has reported
this issue, and the CSI-2 bus still fails to startup properly...
I do not have CSI-2 receiver driver documentation for the other platform
I am testing on and where my patches improved stability, but the i.MX6 error
reported by Jagan could be useful to help debugging what's wrong with the
serial bus initialization on that platform.
The error comes from register MIPI_CSI_PHY_STATE of the i.MX6 MIPI_CSI-2
interface and reads as:
0x2b0 : BIT(9) -> clock in ULPS state
BIT(7) -> lane3 in stop state
BIT(5) -> lane1 in stop state
BIT(4) -> lane0 in stop state
The i.MX6 driver wants instead that register to be:
0x430 : BIT(10) -> clock in stop state
BIT(5) -> lane1 in stop state
BIT(4) -> lane0 in stop state
So indeed it represents a useful debugging tool to have an idea of what's going
on there.
I'm a bit puzzled by the BIT(7) as lane3 is not connected, as ov5640 is a 2
lanes sensor, and I would have a question for Jagan here: has the sensor been
validated with BSP/vendor kernels on that platform? There's a flat cable
connecting the camera module to the main board, and for high speed
differential signals that's maybe not the best possible solution...
Also, anyone interested in my mumbling on the ov5640 MIPI bus
initialization, I've collected some thoughts here:
https://paste.debian.net/1031942/
Any comment is of course welcome, and if I have a confirmation that
the Engicam platform works with that flat cable, I'll keep working on
it..
Thanks
j
> Thanks
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
2018-07-03 18:41 ` jacopo mondi
@ 2018-07-04 0:18 ` Fabio Estevam
2018-07-04 5:18 ` Jagan Teki
1 sibling, 0 replies; 38+ messages in thread
From: Fabio Estevam @ 2018-07-04 0:18 UTC (permalink / raw)
To: jacopo mondi
Cc: Jagan Teki, Philipp Zabel, Steve Longerbeam, Fabio Estevam,
Discussion of the development of and with GStreamer, linux-media,
linux-kernel
Hi Jacopo,
On Tue, Jul 3, 2018 at 3:41 PM, jacopo mondi <jacopo@jmondi.org> wrote:
> I've been able to test on the same platform where Jagan has reported
> this issue, and the CSI-2 bus still fails to startup properly...
Last time I heard from Jagan he reported that the LP11 timeout issue
was caused by:
commit 476dec012f4c6545b0b7599cd9adba2ed819ad3b
Author: Maxime Ripard <maxime.ripard@bootlin.com>
Date: Mon Apr 16 08:36:55 2018 -0400
media: ov5640: Add horizontal and vertical totals
All the initialization arrays are changing the horizontal and vertical
totals for some value.
In order to clean up the driver, and since we're going to need that value
later on, let's introduce in the ov5640_mode_info structure the horizontal
and vertical total sizes, and move these out of the bytes array.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Thanks
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
2018-07-03 18:41 ` jacopo mondi
2018-07-04 0:18 ` Fabio Estevam
@ 2018-07-04 5:18 ` Jagan Teki
2018-07-04 6:57 ` Jagan Teki
[not found] ` <588A2275-4D45-442D-8B38-7A17C27BED10@gmail.com>
1 sibling, 2 replies; 38+ messages in thread
From: Jagan Teki @ 2018-07-04 5:18 UTC (permalink / raw)
To: jacopo mondi
Cc: Fabio Estevam, Philipp Zabel, Steve Longerbeam, Fabio Estevam,
Discussion of the development of and with GStreamer, linux-media,
linux-kernel
On Wed, Jul 4, 2018 at 12:11 AM, jacopo mondi <jacopo@jmondi.org> wrote:
> Hi Fabio,
> thanks for pointing Jagan to my series, but..
>
> On Fri, Jun 29, 2018 at 06:46:39PM -0300, Fabio Estevam wrote:
>> Hi Jagan,
>>
>> On Fri, Jun 1, 2018 at 2:19 AM, Jagan Teki <jagan@amarulasolutions.com> wrote:
>>
>> > I actually tried even on video0 which I forgot to post the log [4].
>> > Now I understand I'm trying for wrong device to capture look like
>> > video0 which is ipu1 prepenc firing kernel oops. I'm trying to debug
>> > this and let me know if have any suggestion to look into.
>> >
>> > [ 56.800074] imx6-mipi-csi2: LP-11 timeout, phy_state = 0x000002b0
>> > [ 57.369660] ipu1_ic_prpenc: EOF timeout
>> > [ 57.849692] ipu1_ic_prpenc: wait last EOF timeout
>> > [ 57.855703] ipu1_ic_prpenc: pipeline start failed with -110
>>
>> Could you please test this series from Jacopo?
>> https://www.mail-archive.com/linux-media@vger.kernel.org/msg133191.html
Will verify this on my board and let you know the result.
>>
>> It seems that it would fix this problem.
>
> ... unfortunately it does not :(
>
> I've been able to test on the same platform where Jagan has reported
> this issue, and the CSI-2 bus still fails to startup properly...
>
> I do not have CSI-2 receiver driver documentation for the other platform
> I am testing on and where my patches improved stability, but the i.MX6 error
> reported by Jagan could be useful to help debugging what's wrong with the
> serial bus initialization on that platform.
>
> The error comes from register MIPI_CSI_PHY_STATE of the i.MX6 MIPI_CSI-2
> interface and reads as:
>
> 0x2b0 : BIT(9) -> clock in ULPS state
> BIT(7) -> lane3 in stop state
> BIT(5) -> lane1 in stop state
> BIT(4) -> lane0 in stop state
>
> The i.MX6 driver wants instead that register to be:
>
> 0x430 : BIT(10) -> clock in stop state
> BIT(5) -> lane1 in stop state
> BIT(4) -> lane0 in stop state
>
> So indeed it represents a useful debugging tool to have an idea of what's going
> on there.
>
> I'm a bit puzzled by the BIT(7) as lane3 is not connected, as ov5640 is a 2
> lanes sensor, and I would have a question for Jagan here: has the sensor been
> validated with BSP/vendor kernels on that platform? There's a flat cable
> connecting the camera module to the main board, and for high speed
> differential signals that's maybe not the best possible solution...
Yes, I've validated through engicam Linux, [1] before verifying to
Mainline. I have similar board which posted on the website on J5 point
20-Polig connector attached to bus to sensor[2]
[1] https://github.com/engicam-stable/engicam-kernel-4.1.15/blob/som_release/arch/arm/boot/dts/icoremx6q-icore-mipi.dts
[2] https://www.engicam.com/vis-prod/101145
Jagan.
--
Jagan Teki
Senior Linux Kernel Engineer | Amarula Solutions
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
2018-07-04 5:18 ` Jagan Teki
@ 2018-07-04 6:57 ` Jagan Teki
2018-07-04 14:26 ` Fabio Estevam
[not found] ` <588A2275-4D45-442D-8B38-7A17C27BED10@gmail.com>
1 sibling, 1 reply; 38+ messages in thread
From: Jagan Teki @ 2018-07-04 6:57 UTC (permalink / raw)
To: jacopo mondi
Cc: Fabio Estevam, Philipp Zabel, Steve Longerbeam, Fabio Estevam,
Discussion of the development of and with GStreamer, linux-media,
linux-kernel
On Wed, Jul 4, 2018 at 10:48 AM, Jagan Teki <jagan@amarulasolutions.com> wrote:
> On Wed, Jul 4, 2018 at 12:11 AM, jacopo mondi <jacopo@jmondi.org> wrote:
>> Hi Fabio,
>> thanks for pointing Jagan to my series, but..
>>
>> On Fri, Jun 29, 2018 at 06:46:39PM -0300, Fabio Estevam wrote:
>>> Hi Jagan,
>>>
>>> On Fri, Jun 1, 2018 at 2:19 AM, Jagan Teki <jagan@amarulasolutions.com> wrote:
>>>
>>> > I actually tried even on video0 which I forgot to post the log [4].
>>> > Now I understand I'm trying for wrong device to capture look like
>>> > video0 which is ipu1 prepenc firing kernel oops. I'm trying to debug
>>> > this and let me know if have any suggestion to look into.
>>> >
>>> > [ 56.800074] imx6-mipi-csi2: LP-11 timeout, phy_state = 0x000002b0
>>> > [ 57.369660] ipu1_ic_prpenc: EOF timeout
>>> > [ 57.849692] ipu1_ic_prpenc: wait last EOF timeout
>>> > [ 57.855703] ipu1_ic_prpenc: pipeline start failed with -110
>>>
>>> Could you please test this series from Jacopo?
>>> https://www.mail-archive.com/linux-media@vger.kernel.org/msg133191.html
>
> Will verify this on my board and let you know the result.
I have similar issue, it doesn't work.
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
[not found] ` <588A2275-4D45-442D-8B38-7A17C27BED10@gmail.com>
@ 2018-07-04 6:59 ` Jagan Teki
2018-07-04 7:11 ` chain256
0 siblings, 1 reply; 38+ messages in thread
From: Jagan Teki @ 2018-07-04 6:59 UTC (permalink / raw)
To: Discussion of the development of and with GStreamer
Cc: jacopo mondi, Steve Longerbeam, linux-kernel, Fabio Estevam,
Philipp Zabel, Fabio Estevam, linux-media
On Wed, Jul 4, 2018 at 12:14 PM, chain256 <tonu.jaansoo@gmail.com> wrote:
> Hi!
>
> Just to let you know, I have same sensor working on Variscite iMX6 DART.
> Using Yocto Morty release (
> http://variwiki.com/index.php?title=VAR-SOM-MX6_Yocto&release=RELEASE_MORTY_V1.0_VAR-SOM-MX6
> )
> Had to hack device tree abit and that was about it. Hope you find something
> useful on that page.
Thanks for the link. Can you confirm is your sensor working with
Mainline? we are trying to verify mainline ov5640 sensor here.
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
2018-07-04 6:59 ` Jagan Teki
@ 2018-07-04 7:11 ` chain256
0 siblings, 0 replies; 38+ messages in thread
From: chain256 @ 2018-07-04 7:11 UTC (permalink / raw)
To: Discussion of the development of and with GStreamer
Cc: jacopo mondi, Steve Longerbeam, linux-kernel, Fabio Estevam,
Philipp Zabel, Fabio Estevam, linux-media
Sorry, can’t do it for next two weeks. Is this platform developed in your company? Maybe you can blame the hardware guys... I have had problems with them getting it right in my past experience :)
Tõnu
> On 3 Jul 2018, at 23:59, Jagan Teki <jagan@amarulasolutions.com> wrote:
>
> On Wed, Jul 4, 2018 at 12:14 PM, chain256 <tonu.jaansoo@gmail.com> wrote:
>> Hi!
>>
>> Just to let you know, I have same sensor working on Variscite iMX6 DART.
>> Using Yocto Morty release (
>> http://variwiki.com/index.php?title=VAR-SOM-MX6_Yocto&release=RELEASE_MORTY_V1.0_VAR-SOM-MX6
>> )
>> Had to hack device tree abit and that was about it. Hope you find something
>> useful on that page.
>
> Thanks for the link. Can you confirm is your sensor working with
> Mainline? we are trying to verify mainline ov5640 sensor here.
> _______________________________________________
> gstreamer-devel mailing list
> gstreamer-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
2018-07-04 6:57 ` Jagan Teki
@ 2018-07-04 14:26 ` Fabio Estevam
0 siblings, 0 replies; 38+ messages in thread
From: Fabio Estevam @ 2018-07-04 14:26 UTC (permalink / raw)
To: Jagan Teki
Cc: jacopo mondi, Philipp Zabel, Steve Longerbeam, Fabio Estevam,
Discussion of the development of and with GStreamer, linux-media,
linux-kernel
Hi Jagan,
On Wed, Jul 4, 2018 at 3:57 AM, Jagan Teki <jagan@amarulasolutions.com> wrote:
> I have similar issue, it doesn't work.
What is the error? Is it still the LP11 timeout?
Does this error go away if you undo the changes from commit 476dec012f4c654 ?
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
2018-05-31 15:09 i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux Jagan Teki
2018-05-31 16:10 ` Nicolas Dufresne
2018-05-31 19:06 ` Philipp Zabel
@ 2018-09-20 14:56 ` jacopo mondi
2018-10-16 19:46 ` Adam Ford
2 siblings, 1 reply; 38+ messages in thread
From: jacopo mondi @ 2018-09-20 14:56 UTC (permalink / raw)
To: Jagan Teki
Cc: Philipp Zabel, Steve Longerbeam, Fabio Estevam,
Discussion of the development of and with GStreamer, linux-media,
linux-kernel
[-- Attachment #1: Type: text/plain, Size: 38609 bytes --]
Hi imx6 people,
On Thu, May 31, 2018 at 08:39:20PM +0530, Jagan Teki wrote:
> Hi All,
>
> I'm trying to verify MIPI-CSI2 OV5640 camera on i.MX6 platform with
> Mainline Linux.
Sorry to resurect this, but before diving deep into details, do anyone
of you verified JPEG capture with ov5640 and i.MX6 platforms, and has
maybe a pipeline configuration to share :) ?
Thanks
j
>
> I've followed these[1] instructions to configure MC links and pads
> based on the probing details from dmesg and trying to capture
> ipu1_ic_prpenc capture (/dev/video1) but it's not working.
>
> Can anyone help me to verify whether I configured all the details
> properly if not please suggest.
>
> I'm pasting full log here, so-that anyone can comment in line and dt
> changes are at [2]
>
> Log:
> -----
>
> [ 1.211866] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0
> [ 1.220211] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 0
> [ 1.230344] imx-ipuv3 2400000.ipu: IPUv3H probed
> [ 1.237170] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> [ 1.243920] [drm] No driver support for vblank timestamp query.
> [ 1.250831] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops
> ipu_crtc_ops)
> [ 1.258503] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops
> ipu_crtc_ops)
> [ 1.266293] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops
> ipu_crtc_ops)
> [ 1.274027] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops
> ipu_crtc_ops)
> [ 1.282304] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller
> v1.30a with HDCP (DWC HDMI 3D TX PHY)
> [ 1.295722] imx-drm display-subsystem: bound 120000.hdmi (ops
> dw_hdmi_imx_ops)
> [ 1.373615] Console: switching to colour frame buffer device 128x48
> [ 1.396495] imx-drm display-subsystem: fb0: frame buffer device
> [ 1.404620] [drm] Initialized imx-drm 1.0.0 20120507 for
> display-subsystem on minor 1
> [ 1.412763] imx-ipuv3 2800000.ipu: IPUv3H probed
> [ 1.439673] brd: module loaded
> [ 1.469099] loop: module loaded
> [ 1.480324] nand: No NAND device found
> [ 1.487768] libphy: Fixed MDIO Bus: probed
> [ 1.493034] CAN device driver interface
> [ 1.499057] fec 2188000.ethernet: 2188000.ethernet supply phy not
> found, using dummy regulator
> [ 1.511633] pps pps0: new PPS source ptp0
> [ 1.516928] fec 2188000.ethernet (unnamed net_device)
> (uninitialized): Invalid MAC address: 00:00:00:00:00:00
> [ 1.527177] fec 2188000.ethernet (unnamed net_device)
> (uninitialized): Using random MAC address: f2:5a:6d:a6:90:74
> [ 1.543567] libphy: fec_enet_mii_bus: probed
> [ 1.549138] fec 2188000.ethernet eth0: registered PHC device 0
> [ 1.556499] usbcore: registered new interface driver asix
> [ 1.562066] usbcore: registered new interface driver ax88179_178a
> [ 1.568259] usbcore: registered new interface driver cdc_ether
> [ 1.574276] usbcore: registered new interface driver net1080
> [ 1.580097] usbcore: registered new interface driver cdc_subset
> [ 1.586144] usbcore: registered new interface driver zaurus
> [ 1.591910] usbcore: registered new interface driver cdc_ncm
> [ 1.597589] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 1.604209] ehci-pci: EHCI PCI platform driver
> [ 1.608760] ehci-mxc: Freescale On-Chip EHCI Host driver
> [ 1.614851] usbcore: registered new interface driver usb-storage
> [ 1.629947] ci_hdrc ci_hdrc.0: EHCI Host Controller
> [ 1.635066] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
> [ 1.669473] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
> [ 1.677809] hub 1-0:1.0: USB hub found
> [ 1.681902] hub 1-0:1.0: 1 port detected
> [ 1.692839] ci_hdrc ci_hdrc.1: EHCI Host Controller
> [ 1.697791] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2
> [ 1.729537] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
> [ 1.736740] hub 2-0:1.0: USB hub found
> [ 1.740655] hub 2-0:1.0: 1 port detected
> [ 1.753468] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered
> 20cc000.snvs:snvs-rtc-lp as rtc0
> [ 1.762976] i2c /dev entries driver
> [ 1.811339] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
> [ 1.817865] Bluetooth: HCI UART driver ver 2.3
> [ 1.822460] Bluetooth: HCI UART protocol H4 registered
> [ 1.828297] Bluetooth: HCI UART protocol LL registered
> [ 1.834774] sdhci: Secure Digital Host Controller Interface driver
> [ 1.841059] sdhci: Copyright(c) Pierre Ossman
> [ 1.845437] sdhci-pltfm: SDHCI platform and OF driver helper
> [ 1.852834] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO
> [ 1.893497] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc]
> using ADMA
> [ 1.937500] mmc1: SDHCI controller on 2198000.usdhc [2198000.usdhc]
> using ADMA
> [ 1.945049] mmc0: host does not support reading read-only switch,
> assuming write-enable
> [ 1.959799] mmc0: new high speed SDHC card at address 1234
> [ 1.968363] mmcblk0: mmc0:1234 SA04G 3.71 GiB
> [ 1.977984] caam 2100000.caam: Entropy delay = 3200
> [ 2.043796] caam 2100000.caam: Instantiated RNG4 SH0
> [ 2.104558] caam 2100000.caam: Instantiated RNG4 SH1
> [ 2.109596] caam 2100000.caam: device ID = 0x0a16010000000000 (Era 4)
> [ 2.116060] caam 2100000.caam: job rings = 2, qi = 0, dpaa2 = no
> [ 2.139266] caam algorithms registered in /proc/crypto
> [ 2.139341] mmcblk0: p1 p2
> [ 2.150910] caam_jr 2101000.jr0: registering rng-caam
> [ 2.157327] usbcore: registered new interface driver usbhid
> [ 2.163103] usbhid: USB HID core driver
> [ 2.171149] imx-media: subdev ov5640 2-003c bound
> [ 2.176631] imx-media: subdev ipu1_vdic bound
> [ 2.181640] imx-media: subdev ipu2_vdic bound
> [ 2.183831] mmc1: new high speed MMC card at address 0001
> [ 2.186357] imx-media: subdev ipu1_ic_prp bound
> [ 2.193649] mmcblk1: mmc1:0001 M62704 3.53 GiB
> [ 2.197342] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video0
> [ 2.202620] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB
> [ 2.208083] imx-media: subdev ipu1_ic_prpenc bound
> [ 2.215764] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB
> [ 2.219512] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video1
> [ 2.231868] imx-media: subdev ipu1_ic_prpvf bound
> [ 2.232186] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB,
> chardev (244:0)
> [ 2.236748] imx-media: subdev ipu2_ic_prp bound
> [ 2.245958] mmcblk1: p1 p2
> [ 2.251569] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video2
> [ 2.258696] imx-media: subdev ipu2_ic_prpenc bound
> [ 2.264108] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video3
> [ 2.271119] imx-media: subdev ipu2_ic_prpvf bound
> [ 2.277042] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video4
> [ 2.283312] imx-media: subdev ipu1_csi0 bound
> [ 2.288312] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video5
> [ 2.294583] imx-media: subdev ipu1_csi1 bound
> [ 2.299694] ipu2_csi0: Registered ipu2_csi0 capture as /dev/video6
> [ 2.305902] imx-media: subdev ipu2_csi0 bound
> [ 2.310953] ipu2_csi1: Registered ipu2_csi1 capture as /dev/video7
> [ 2.317162] imx-media: subdev ipu2_csi1 bound
> [ 2.322293] imx-media: subdev imx6-mipi-csi2 bound
> [ 2.336025] sgtl5000 2-000a: Error reading chip id -6
> [ 2.346932] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW
> [ 2.360345] NET: Registered protocol family 10
> [ 2.367761] Segment Routing with IPv6
> [ 2.371704] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
> [ 2.379180] NET: Registered protocol family 17
> [ 2.383872] can: controller area network core (rev 20170425 abi 9)
> [ 2.390281] NET: Registered protocol family 29
> [ 2.394756] can: raw protocol (rev 20170425)
> [ 2.399126] can: broadcast manager protocol (rev 20170425 t)
> [ 2.404869] can: netlink gateway (rev 20170425) max_hops=1
> [ 2.410989] Key type dns_resolver registered
> [ 2.420041] Registering SWP/SWPB emulation handler
> [ 2.426337] Loading compiled-in X.509 certificates
> [ 2.505422] imx-media: subdev ipu1_csi0_mux bound
> [ 2.511142] imx-media: subdev ipu2_csi1_mux bound
> [ 2.515930] imx-media: imx6-mipi-csi2:4 -> ipu2_csi1_mux:0
> [ 2.518384] random: fast init done
> [ 2.521600] imx-media: imx6-mipi-csi2:1 -> ipu1_csi0_mux:0
> [ 2.530561] imx-media: ov5640 2-003c:0 -> imx6-mipi-csi2:0
> [ 2.536094] imx-media: ipu2_csi1:1 -> ipu2_ic_prp:0
> [ 2.541052] imx-media: ipu2_csi1:1 -> ipu2_vdic:0
> [ 2.545801] imx-media: ipu2_csi1_mux:2 -> ipu2_csi1:0
> [ 2.550932] imx-media: ipu2_csi0:1 -> ipu2_ic_prp:0
> [ 2.555837] imx-media: ipu2_csi0:1 -> ipu2_vdic:0
> [ 2.560629] imx-media: imx6-mipi-csi2:3 -> ipu2_csi0:0
> [ 2.565800] imx-media: ipu1_csi1:1 -> ipu1_ic_prp:0
> [ 2.570750] imx-media: ipu1_csi1:1 -> ipu1_vdic:0
> [ 2.575497] imx-media: imx6-mipi-csi2:2 -> ipu1_csi1:0
> [ 2.580716] imx-media: ipu1_csi0:1 -> ipu1_ic_prp:0
> [ 2.585623] imx-media: ipu1_csi0:1 -> ipu1_vdic:0
> [ 2.590411] imx-media: ipu1_csi0_mux:2 -> ipu1_csi0:0
> [ 2.595499] imx-media: ipu2_ic_prp:1 -> ipu2_ic_prpenc:0
> [ 2.600901] imx-media: ipu2_ic_prp:2 -> ipu2_ic_prpvf:0
> [ 2.606159] imx-media: ipu1_ic_prp:1 -> ipu1_ic_prpenc:0
> [ 2.611548] imx-media: ipu1_ic_prp:2 -> ipu1_ic_prpvf:0
> [ 2.616803] imx-media: ipu2_vdic:2 -> ipu2_ic_prp:0
> [ 2.621754] imx-media: ipu1_vdic:2 -> ipu1_ic_prp:0
> [ 2.637015] imx_thermal tempmon: Industrial CPU temperature grade -
> max:105C critical:100C passive:95C
> [ 2.650475] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock
> to 1970-01-01 00:00:00 UTC (0)
> [ 2.659880] cfg80211: Loading compiled-in X.509 certificates for
> regulatory database
> [ 2.674031] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
> [ 2.682013] platform regulatory.0: Direct firmware load for
> regulatory.db failed with error -2
> [ 2.690851] cfg80211: failed to load regulatory.db
> [ 2.695737] ALSA device list:
> [ 2.698762] No soundcards found.
> [ 3.592224] EXT4-fs (mmcblk0p2): recovery complete
> [ 3.602020] EXT4-fs (mmcblk0p2): mounted filesystem with ordered
> data mode. Opts: (null)
> [ 3.610371] VFS: Mounted root (ext4 filesystem) on device 179:2.
> [ 3.618708] devtmpfs: mounted
> [ 3.624665] Freeing unused kernel memory: 1024K
> [ 3.743951] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
> Starting logging: OK
> Initializing random number generator... [ 3.897748] random: dd:
> uninitialized urandom read (512 bytes read)
> done.
> Starting network: OK
>
> Welcome to Engicam i.CoreM6 Quad/Dual/DualLite/Solo
> buildroot login: root
> # media-ctl -l "'ov5640 2-003c':0 -> 'imx6-mipi-csi2':0[1]"
> # media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]"
> # media-ctl -l "'ipu1_csi1':1 -> 'ipu1_ic_prp':0[1]"
> # media-ctl -l "'ipu1_ic_prp':1 -> 'ipu1_ic_prpenc':0[1]"
> # media-ctl -l "'ipu1_ic_prpenc':1 -> 'ipu1_ic_prpenc capture':0[1]"
> # media-ctl -V "'ov5640 2-003c':0 [fmt:UYVY2X8/640x480 field:none]"
> # media-ctl -V "'imx6-mipi-csi2':2 [fmt:UYVY2X8/640x480 field:none]"
> # media-ctl -V "'ipu1_csi1':1 [fmt:AYUV32/640x480 field:none]"
> # media-ctl -V "'ipu1_ic_prp':1 [fmt:AYUV32/640x480 field:none]"
> # media-ctl -V "'ipu1_ic_prpenc':1 [fmt:AYUV32/640x480 field:none]"
> # med# media-ctl -p
> Media controller API version 4.17.0
>
> Media device information
> ------------------------
> driver imx-media
> model imx-media
> serial
> bus info
> hw revision 0x0
> driver version 4.17.0
>
> Device topology
> - entity 1: ov5640 2-003c (1 pad, 1 link)
> type V4L2 subdev subtype Sensor flags 0
> device node name /dev/v4l-subdev0
> pad0: Source
> [fmt:UYVY8_2X8/640x480 field:none]
> -> "imx6-mipi-csi2":0 [ENABLED]
>
> - entity 3: ipu1_vdic (3 pads, 3 links)
> type V4L2 subdev subtype Unknown flags 0
> device node name /dev/v4l-subdev1
> pad0: Sink
> [fmt:AYUV8_1X32/640x480 field:none]
> <- "ipu1_csi0":1 []
> <- "ipu1_csi1":1 []
> pad1: Sink
> [fmt:UYVY8_2X8/640x480 field:none]
> pad2: Source
> [fmt:AYUV8_1X32/640x480 field:none]
> -> "ipu1_ic_prp":0 []
>
> - entity 7: ipu2_vdic (3 pads, 3 links)
> type V4L2 subdev subtype Unknown flags 0
> device node name /dev/v4l-subdev2
> pad0: Sink
> [fmt:AYUV8_1X32/640x480 field:none]
> <- "ipu2_csi0":1 []
> <- "ipu2_csi1":1 []
> pad1: Sink
> [fmt:UYVY8_2X8/640x480 field:none]
> pad2: Source
> [fmt:AYUV8_1X32/640x480 field:none]
> -> "ipu2_ic_prp":0 []
>
> - entity 11: ipu1_ic_prp (3 pads, 5 links)
> type V4L2 subdev subtype Unknown flags 0
> device node name /dev/v4l-subdev3
> pad0: Sink
> [fmt:AYUV8_1X32/640x480 field:none]
> <- "ipu1_vdic":2 []
> <- "ipu1_csi0":1 []
> <- "ipu1_csi1":1 [ENABLED]
> pad1: Source
> [fmt:AYUV8_1X32/640x480 field:none]
> -> "ipu1_ic_prpenc":0 [ENABLED]
> pad2: Source
> [fmt:AYUV8_1X32/640x480 field:none]
> -> "ipu1_ic_prpvf":0 []
>
> - entity 15: ipu1_ic_prpenc (2 pads, 2 links)
> type V4L2 subdev subtype Unknown flags 0
> device node name /dev/v4l-subdev4
> pad0: Sink
> [fmt:AYUV8_1X32/640x480 field:none]
> <- "ipu1_ic_prp":1 [ENABLED]
> pad1: Source
> [fmt:AYUV8_1X32/640x480 field:none]
> -> "ipu1_ic_prpenc capture":0 [ENABLED]
>
> - entity 18: ipu1_ic_prpenc capture (1 pad, 1 link)
> type Node subtype V4L flags 0
> device node name /dev/video0
> pad0: Sink
> <- "ipu1_ic_prpenc":1 [ENABLED]
>
> - entity 24: ipu1_ic_prpvf (2 pads, 2 links)
> type V4L2 subdev subtype Unknown flags 0
> device node name /dev/v4l-subdev5
> pad0: Sink
> [fmt:AYUV8_1X32/640x480 field:none]
> <- "ipu1_ic_prp":2 []
> pad1: Source
> [fmt:AYUV8_1X32/640x480 field:none]
> -> "ipu1_ic_prpvf capture":0 []
>
> - entity 27: ipu1_ic_prpvf capture (1 pad, 1 link)
> type Node subtype V4L flags 0
> device node name /dev/video1
> pad0: Sink
> <- "ipu1_ic_prpvf":1 []
>
> - entity 33: ipu2_ic_prp (3 pads, 5 links)
> type V4L2 subdev subtype Unknown flags 0
> device node name /dev/v4l-subdev6
> pad0: Sink
> [fmt:AYUV8_1X32/640x480 field:none]
> <- "ipu2_vdic":2 []
> <- "ipu2_csi0":1 []
> <- "ipu2_csi1":1 []
> pad1: Source
> [fmt:AYUV8_1X32/640x480 field:none]
> -> "ipu2_ic_prpenc":0 []
> pad2: Source
> [fmt:AYUV8_1X32/640x480 field:none]
> -> "ipu2_ic_prpvf":0 []
>
> - entity 37: ipu2_ic_prpenc (2 pads, 2 links)
> type V4L2 subdev subtype Unknown flags 0
> device node name /dev/v4l-subdev7
> pad0: Sink
> [fmt:AYUV8_1X32/640x480 field:none]
> <- "ipu2_ic_prp":1 []
> pad1: Source
> [fmt:AYUV8_1X32/640x480 field:none]
> -> "ipu2_ic_prpenc capture":0 []
>
> - entity 40: ipu2_ic_prpenc capture (1 pad, 1 link)
> type Node subtype V4L flags 0
> device node name /dev/video2
> pad0: Sink
> <- "ipu2_ic_prpenc":1 []
>
> - entity 46: ipu2_ic_prpvf (2 pads, 2 links)
> type V4L2 subdev subtype Unknown flags 0
> device node name /dev/v4l-subdev8
> pad0: Sink
> [fmt:AYUV8_1X32/640x480 field:none]
> <- "ipu2_ic_prp":2 []
> pad1: Source
> [fmt:AYUV8_1X32/640x480 field:none]
> -> "ipu2_ic_prpvf capture":0 []
>
> - entity 49: ipu2_ic_prpvf capture (1 pad, 1 link)
> type Node subtype V4L flags 0
> device node name /dev/video3
> pad0: Sink
> <- "ipu2_ic_prpvf":1 []
>
> - entity 55: ipu1_csi0 (3 pads, 4 links)
> type V4L2 subdev subtype Unknown flags 0
> device node name /dev/v4l-subdev9
> pad0: Sink
> [fmt:UYVY8_2X8/640x480 field:none
> crop.bounds:(0,0)/640x480
> crop:(0,0)/640x480
> compose.bounds:(0,0)/640x480
> compose:(0,0)/640x480]
> <- "ipu1_csi0_mux":2 []
> pad1: Source
> [fmt:AYUV8_1X32/640x480 field:none]
> -> "ipu1_ic_prp":0 []
> -> "ipu1_vdic":0 []
> pad2: Source
> [fmt:AYUV8_1X32/640x480 field:none]
> -> "ipu1_csi0 capture":0 []
>
> - entity 59: ipu1_csi0 capture (1 pad, 1 link)
> type Node subtype V4L flags 0
> device node name /dev/video4
> pad0: Sink
> <- "ipu1_csi0":2 []
>
> - entity 65: ipu1_csi1 (3 pads, 4 links)
> type V4L2 subdev subtype Unknown flags 0
> device node name /dev/v4l-subdev10
> pad0: Sink
> [fmt:UYVY8_2X8/640x480 field:none
> crop.bounds:(0,0)/640x480
> crop:(0,0)/640x480
> compose.bounds:(0,0)/640x480
> compose:(0,0)/640x480]
> <- "imx6-mipi-csi2":2 [ENABLED]
> pad1: Source
> [fmt:AYUV8_1X32/640x480 field:none]
> -> "ipu1_ic_prp":0 [ENABLED]
> -> "ipu1_vdic":0 []
> pad2: Source
> [fmt:AYUV8_1X32/640x480 field:none]
> -> "ipu1_csi1 capture":0 []
>
> - entity 69: ipu1_csi1 capture (1 pad, 1 link)
> type Node subtype V4L flags 0
> device node name /dev/video5
> pad0: Sink
> <- "ipu1_csi1":2 []
>
> - entity 75: ipu2_csi0 (3 pads, 4 links)
> type V4L2 subdev subtype Unknown flags 0
> device node name /dev/v4l-subdev11
> pad0: Sink
> [fmt:UYVY8_2X8/640x480 field:none
> crop.bounds:(0,0)/640x480
> crop:(0,0)/640x480
> compose.bounds:(0,0)/640x480
> compose:(0,0)/640x480]
> <- "imx6-mipi-csi2":3 []
> pad1: Source
> [fmt:AYUV8_1X32/640x480 field:none]
> -> "ipu2_ic_prp":0 []
> -> "ipu2_vdic":0 []
> pad2: Source
> [fmt:AYUV8_1X32/640x480 field:none]
> -> "ipu2_csi0 capture":0 []
>
> - entity 79: ipu2_csi0 capture (1 pad, 1 link)
> type Node subtype V4L flags 0
> device node name /dev/video6
> pad0: Sink
> <- "ipu2_csi0":2 []
>
> - entity 85: ipu2_csi1 (3 pads, 4 links)
> type V4L2 subdev subtype Unknown flags 0
> device node name /dev/v4l-subdev12
> pad0: Sink
> [fmt:UYVY8_2X8/640x480 field:none
> crop.bounds:(0,0)/640x480
> crop:(0,0)/640x480
> compose.bounds:(0,0)/640x480
> compose:(0,0)/640x480]
> <- "ipu2_csi1_mux":2 []
> pad1: Source
> [fmt:AYUV8_1X32/640x480 field:none]
> -> "ipu2_ic_prp":0 []
> -> "ipu2_vdic":0 []
> pad2: Source
> [fmt:AYUV8_1X32/640x480 field:none]
> -> "ipu2_csi1 capture":0 []
>
> - entity 89: ipu2_csi1 capture (1 pad, 1 link)
> type Node subtype V4L flags 0
> device node name /dev/video7
> pad0: Sink
> <- "ipu2_csi1":2 []
>
> - entity 95: imx6-mipi-csi2 (5 pads, 5 links)
> type V4L2 subdev subtype Unknown flags 0
> device node name /dev/v4l-subdev13
> pad0: Sink
> [fmt:UYVY8_2X8/640x480 field:none]
> <- "ov5640 2-003c":0 [ENABLED]
> pad1: Source
> [fmt:UYVY8_2X8/640x480 field:none]
> -> "ipu1_csi0_mux":0 []
> pad2: Source
> [fmt:UYVY8_2X8/640x480 field:none]
> -> "ipu1_csi1":0 [ENABLED]
> pad3: Source
> [fmt:UYVY8_2X8/640x480 field:none]
> -> "ipu2_csi0":0 []
> pad4: Source
> [fmt:UYVY8_2X8/640x480 field:none]
> -> "ipu2_csi1_mux":0 []
>
> - entity 101: ipu1_csi0_mux (3 pads, 2 links)
> type V4L2 subdev subtype Unknown flags 0
> device node name /dev/v4l-subdev14
> pad0: Sink
> [fmt:unknown/0x0]
> <- "imx6-mipi-csi2":1 []
> pad1: Sink
> [fmt:unknown/0x0]
> pad2: Source
> [fmt:unknown/0x0]
> -> "ipu1_csi0":0 []
>
> - entity 105: ipu2_csi1_mux (3 pads, 2 links)
> type V4L2 subdev subtype Unknown flags 0
> device node name /dev/v4l-subdev15
> pad0: Sink
> [fmt:unknown/0x0]
> <- "imx6-mipi-csi2":4 []
> pad1: Sink
> [fmt:unknown/0x0]
> pad2: Source
> [fmt:unknown/0x0]
> -> "ipu2_csi1":0 []
>
> # GST_DEBUG="v4l2*:5" gst-launch-1.0 -v v4l2src device=/dev/video1 ! \
> > autovideosink
> 0:00:01.086281666 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l1
> 0:00:01.087369666 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l5
> 0:00:01.088496000 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l.
> 0:00:01.089540333 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4lR
> 0:00:01.090494666 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4lH
> 0:00:01.091657666 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l4
> 0:00:01.092745000 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l
> 0:00:01.093703333 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l
> 0:00:01.094854000 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l
> 0:00:01.095815000 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l
> 0:00:01.096818666 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4lB
> 0:00:01.097819000 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l8
> 0:00:01.098771000 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l
> 0:00:01.099798666 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l1
> 0:00:01.100776666 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4lV
> 0:00:01.101755333 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4lY
> 0:00:01.102771666 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4lP
> 0:00:01.103712000 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l4
> 0:00:01.104720000 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4lO
> 0:00:01.105697000 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4lP
> 0:00:01.106629666 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l4
> 0:00:01.107681666 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l4
> 0:00:01.108660666 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l2
> 0:00:01.442437333 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l0
> 0:00:01.444673333 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l2
> 0:00:01.446842000 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l2
> 0:00:01.449084000 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:1487:gst_v4l2_object_v4l4
> Setting pipeline to PAUSED ...
> 0:00:01.680823000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:524:gst_v4l2_open:<v4l2src01
> 0:00:01.681953333 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:69:gst_v4l2_get_capabilities
> 0:00:01.683098666 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:140:gst_v4l2_fill_lists:<v4s
> 0:00:01.684056666 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:143:gst_v4l2_fill_lists:<v4s
> 0:00:01.685201000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:215:gst_v4l2_fill_lists:<v4s
> 0:00:01.686159333 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> 0:00:01.687207666 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4C
> 0:00:01.688183666 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> 0:00:01.689155333 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4M
> 0:00:01.690142000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> 0:00:01.691114000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4P
> 0:00:01.692080000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> 0:00:01.693073000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4R
> 0:00:01.694043000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> 0:00:01.695760000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4L
> 0:00:01.696736333 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> 0:00:01.697708000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4G
> 0:00:01.698699000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> 0:00:01.699667000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4H
> 0:00:01.700633000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> 0:00:01.701623666 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4I
> 0:00:01.702591000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> 0:00:01.703554333 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4K
> 0:00:01.704604000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> 0:00:01.705576666 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4M
> 0:00:01.706567000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> 0:00:02.040204667 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4B
> 0:00:02.042194667 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> 0:00:02.044190000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4G
> 0:00:02.046338333 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> 0:00:02.048327667 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4H
> 0:00:02.050296000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> 0:00:02.052385000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4K
> 0:00:02.054376000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> 0:00:02.056461333 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4L
> 0:00:02.058434000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> 0:00:02.060423667 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4c
> 0:00:02.062382667 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:263:gst_v4l2_fill_lists:<v4s
> 0:00:02.064291333 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:283:gst_v4l2_fill_lists:<v40
> 0:00:02.066224667 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:292:gst_v4l2_fill_lists:<v4.
> 0:00:02.067190333 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:283:gst_v4l2_fill_lists:<v40
> 0:00:02.068174333 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:300:gst_v4l2_fill_lists:<v40
> 0:00:02.069141000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:283:gst_v4l2_fill_lists:<v40
> 0:00:02.070113000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:305:gst_v4l2_fill_lists:<v4d
> 0:00:02.071088333 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:456:gst_v4l2_fill_lists:<v4e
> 0:00:02.072040000 185 0x1dce880 INFO v4l2
> v4l2_calls.c:592:gst_v4l2_open:<v4l2src0y
> 0:00:02.073017333 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:804:gst_v4l2_set_default)
> 0:00:02.074010667 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:740:gst_v4l2_get_norm:<v4l2m
> 0:00:02.075021000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:754:gst_v4l2_get_norm: Fail1
> 0:00:02.076012000 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:1027:gst_v4l2_get_input:<v4t
> Pipeline is live and does not need PREROLL ...
> 0:00:02.080105333 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:1109:gst_v4l2_object_fil.
> <v4l2src0> getting src format enumerations
> 0:00:02.412981333 185 0x1ec39b0 INFO New clock: GstSystemClock
> v4l2 gstv4l2object.c:1146:gst_v4l2_object_fill_format_list:<v4l2src0>
> got 7 format(s):
> 0:00:02.415407667 185 0x1ec39b0 INFO v4l2
> gstv4l2object.c:1152:gst_v4l2_object_filV
> 0:00:02.417531667 185 0x1ec39b0 INFO v4l2
> gstv4l2object.c:1152:gst_v4l2_object_filY
> 0:00:02.419703667 185 0x1ec39b0 INFO v4l2
> gstv4l2object.c:1152:gst_v4l2_object_filP
> 0:00:02.421860000 185 0x1ec39b0 INFO v4l2
> gstv4l2object.c:1152:gst_v4l2_object_fil2
> 0:00:02.424022667 185 0x1ec39b0 INFO v4l2
> gstv4l2object.c:1152:gst_v4l2_object_fil2
> 0:00:02.426295000 185 0x1ec39b0 INFO v4l2
> gstv4l2object.c:1152:gst_v4l2_object_fil6
> 0:00:02.428481333 185 0x1ec39b0 INFO v4l2
> gstv4l2object.c:1152:gst_v4l2_object_fil2
> 0:00:02.430728333 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:2564:gst_v4l2_object_proV
> 0:00:02.432985333 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:2691:gst_v4l2_object_pro)
> 0:00:02.436117000 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:2564:gst_v4l2_object_proY
> 0:00:02.437252333 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:2691:gst_v4l2_object_pro)
> 0:00:02.438579000 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:2564:gst_v4l2_object_proP
> 0:00:02.439656000 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:2691:gst_v4l2_object_pro)
> 0:00:02.441016667 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:2564:gst_v4l2_object_pro2
> 0:00:02.442092333 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:2691:gst_v4l2_object_pro)
> 0:00:02.443443333 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:2564:gst_v4l2_object_pro2
> 0:00:02.444626667 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:2691:gst_v4l2_object_pro)
> 0:00:02.445990667 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:2564:gst_v4l2_object_pro6
> 0:00:02.447063667 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:2691:gst_v4l2_object_pro)
> 0:00:02.448410333 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:2564:gst_v4l2_object_pro2
> 0:00:02.782148333 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:2691:gst_v4l2_object_pro)
> 0:00:02.785264333 185 0x1ec39b0 INFO v4l2
> gstv4l2object.c:3967:gst_v4l2_object_get}
> 0:00:02.788800000 185 0x1ec39b0 DEBUG v4l2src
> gstv4l2src.c:300:gst_v4l2src_negotiate:<}
> 0:00:02.792207000 185 0x1ec39b0 DEBUG v4l2src
> gstv4l2src.c:308:gst_v4l2src_negotiate:<]
> 0:00:02.795419000 185 0x1ec39b0 DEBUG v4l2src
> gstv4l2src.c:316:gst_v4l2src_negotiate:<}
> 0:00:03.132052667 185 0x1ec39b0 DEBUG v4l2src
> gstv4l2src.c:256:gst_v4l2src_fixate:<v4l}
> 0:00:03.134399667 185 0x1ec39b0 DEBUG v4l2src
> gstv4l2src.c:282:gst_v4l2src_fixate:<v4l}
> 0:00:03.136800667 185 0x1ec39b0 DEBUG v4l2src
> gstv4l2src.c:367:gst_v4l2src_negotiate:<1
> 0:00:03.139067333 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:3887:gst_v4l2_object_stog
> 0:00:03.141452000 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:3176:gst_v4l2_object_seto
> 0:00:03.143608667 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:3310:gst_v4l2_object_set0
> 0:00:03.146025333 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:3361:gst_v4l2_object_set1
> 0:00:03.148229000 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:3370:gst_v4l2_object_set0
> 0:00:03.150373667 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:3404:gst_v4l2_object_set1
> 0:00:03.152589667 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:3414:gst_v4l2_object_set0
> 0:00:03.155250667 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:3455:gst_v4l2_object_set1
> 0:00:03.156584667 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:3472:gst_v4l2_object_set1
> 0:00:03.157659333 185 0x1ec39b0 INFO v4l2
> gstv4l2object.c:3504:gst_v4l2_object_set1
> 0:00:03.491432000 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:2960:gst_v4l2_object_ext0
> 0:00:03.493645333 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:3071:gst_v4l2_object_sav0
> 0:00:03.496027333 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:2843:gst_v4l2_object_setm
> 0:00:03.498180000 185 0x1ec39b0 INFO v4l2
> gstv4l2object.c:2867:gst_v4l2_object_set2
> 0:00:03.502772000 185 0x1ec39b0 DEBUG v4l2bufferpool
> gstv4l2bufferpool.c:509:gst_v4l2_buffer_;
> 0:00:03.505283333 185 0x1ec39b0 INFO v4l2bufferpool
> gstv4l2bufferpool.c:557:gst_v4l2_buffer_2
> 0:00:03.507120000 185 0x1ec39b0 INFO v4l2bufferpool
> gstv4l2bufferpool.c:570:gst_v4l2_buffer_2
> /GstPipeline:pipeline0/GstV4l2Src:v4l2src0.GstPad:src: caps =
> video/x-raw, format=(string)YUY2, width=(i1
> /GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0.GstGhostPad:sink.GstProxyPad:proxypad0:
> caps = vi1
> /GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0/GstKMSSink:autovideosink0-actual-sink-kms.GstPad:1
> 0:00:03/GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0.GstGhostPad:sink:
> caps = video/x-raw, form1
> .512440000 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:3985:gst_v4l2_object_decide_alln
> 0:00:03.513556667 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:4011:gst_v4l2_object_dec>
> 0:00:03.514745667 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:4069:gst_v4l2_object_dec>
> 0:00:03.515889000 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:4134:gst_v4l2_object_deca
> 0:00:03.516969667 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:4143:gst_v4l2_object_dec;
> 0:00:03.851350333 185 0x1ec39b0 DEBUG v4l2bufferpool
> gstv4l2bufferpool.c:509:gst_v4l2_buffer_2
> ams)NULL, options=(string)< GstBufferPoolOptionVideoMeta >;
> 0:00:03.853620333 185 0x1ec39b0 INFO v4l2bufferpool
> gstv4l2bufferpool.c:570:gst_v4l2_buffer_2
> 0:00:03.855780667 185 0x1ec39b0 DEBUG v4l2
> gstv4l2object.c:4150:gst_v4l2_object_dec;
> 0:00:03.858430000 185 0x1ec39b0 DEBUG v4l2bufferpool
> gstv4l2bufferpool.c:509:gst_v4l2_buffer_;
> 0:00:03.861572333 185 0x1ec39b0 DEBUG v4l2bufferpool
> gstv4l2bufferpool.c:707:gst_v4l2_buffer_l
> 0:00:03.863468333 185 0x1ec39b0 DEBUG v4l2bufferpool
> gstv4l2bufferpool.c:737:gst_v4l2_buffer_s
> 0:00:03.918861000 185 0x1ec39b0 DEBUG v4l2allocator
> gstv4l2allocator.c:706:gst_v4l2_allocatod
> 0:00:03.943783333 185 0x1ec39b0 DEBUG v4l2bufferpool
> gstv4l2bufferpool.c:1389:gst_v4l2_buffer8
> 0:00:03.946129333 185 0x1ec39b0 DEBUG v4l2bufferpool
> gstv4l2bufferpool.c:1389:gst_v4l2_buffer8
> 0:00:03.948065000 185 0x1ec39b0 DEBUG v4l2bufferpool
> gstv4l2bufferpool.c:1389:gst_v4l2_buffer8
> 0:00:03.950006000 185 0x1ec39b0 DEBUG v4l2bufferpool
> gstv4l2bufferpool.c:952:gst_v4l2_buffer_g
> 0:00:03.996241333 185 0x1ec39b0 ERROR v4l2bufferpool
> gstv4l2bufferpool.c:641:gst_v4l2_buffer_)
> 0:00:03.998199667 185 0x1ec39b0 DEBUG v4l2bufferpool
> gstv4l2bufferpool.c:1311:gst_v4l2_buffere
> 0:00:04.000463000 185 0x1ec39b0 WARN v4l2bufferpool
> gstv4l2bufferpool.c:1064:gst_v4l2_buffer)
> 0:00:04.004649333 185 0x1ec39b0 DEBUG v4l2bufferpool
> gstv4l2bufferpool.c:1283:gst_v4l2_bufferr
> 0:00:04.005853333 185 0x1ec39b0 WARN v4l2src
> gstv4l2src.c:866:gst_v4l2src_create:<v4lr
> ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Could
> not read from resource.
> Additional debug info:
> gstv4l2bufferpool.c(1064): gst_v4l2_buffer_pool_poll ():
> /GstPipeline:pipeline0/GstV4l2Src:v4l2src0:
> poll error 1: Resource temporarily unavailable (11)
> Execution ended after 0:00:01.606871334
> Setting pipeline to PAUSED ...
> 0:00:04.022385000 185 0x1dce880 DEBUG v4l2bufferpool
> gstv4l2bufferpool.c:931:gst_v4l2_buffer_g
> Setting pipeline to READY ...
> 0:00:04.024850667 185 0x1dce880 DEBUG v4l2bufferpool
> gstv4l2bufferpool.c:879:gst_v4l2_buffer_l
> 0:00:04.026764000 185 0x1dce880 DEBUG v4l2allocator
> gstv4l2allocator.c:757:gst_v4l2_allocator
> 0:00:04.028598333 185 0x1dce880 DEBUG v4l2allocator
> gstv4l2allocator.c:765:gst_v4l2_allocatoe
> 0:00:04.362785667 185 0x1dce880 WARN v4l2bufferpool
> gstv4l2bufferpool.c:918:gst_v4l2_buffer_g
> 0:00:04.364712333 185 0x1dce880 DEBUG v4l2bufferpool
> gstv4l2bufferpool.c:952:gst_v4l2_buffer_g
> 0:00:04.366504333 185 0x1dce880 DEBUG v4l2bufferpool
> gstv4l2bufferpool.c:629:gst_v4l2_buffer_g
> 0:00:04.368607000 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:3887:gst_v4l2_object_stog
> 0:00:04.370713333 185 0x1dce880 DEBUG v4l2
> gstv4l2object.c:3895:gst_v4l2_object_stol
> 0:00:04.372809333 185 0x1dce880 DEBUG v4l2bufferpool
> gstv4l2bufferpool.c:931:gst_v4l2_buffer_g
> 0:00:04.374732000 185 0x1dce880 DEBUG v4l2bufferpool
> gstv4l2bufferpool.c:879:gst_v4l2_buffer_l
> 0:00:04.376541000 185 0x1dce880 DEBUG v4l2bufferpool
> gstv4l2bufferpool.c:663:gst_v4l2_buffer_g
> 0:00:04.378334000 185 0x1dce880 DEBUG v4l2allocator
> gstv4l2allocator.c:757:gst_v4l2_allocator
> Setting pipeline to NULL ...
> 0:00:04.394764333 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:716:gst_v4l2_close:<v4l2src1
> 0:00:04.395897667 185 0x1dce880 DEBUG v4l2
> v4l2_calls.c:464:gst_v4l2_empty_lists:<vs
> Freeing pipeline ...
>
> [1] https://linuxtv.org/downloads/v4l-dvb-apis/v4l-drivers/imx.html#sabresd-with-mipi-csi-2-ov5640
> [2] https://paste.ubuntu.com/p/CTvFqdbyMW/
>
> Jagan.
>
> --
> Jagan Teki
> Senior Linux Kernel Engineer | Amarula Solutions
> U-Boot, Linux | Upstream Maintainer
> Hyderabad, India.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
2018-09-20 14:56 ` jacopo mondi
@ 2018-10-16 19:46 ` Adam Ford
2018-10-17 0:13 ` Steve Longerbeam
0 siblings, 1 reply; 38+ messages in thread
From: Adam Ford @ 2018-10-16 19:46 UTC (permalink / raw)
To: jacopo
Cc: Jagan Teki, p.zabel, steve_longerbeam, Fabio Estevam,
gstreamer-devel, linux-media, Linux Kernel Mailing List
On Thu, Sep 20, 2018 at 9:58 AM jacopo mondi <jacopo@jmondi.org> wrote:
>
> Hi imx6 people,
>
> On Thu, May 31, 2018 at 08:39:20PM +0530, Jagan Teki wrote:
> > Hi All,
> >
> > I'm trying to verify MIPI-CSI2 OV5640 camera on i.MX6 platform with
> > Mainline Linux.
>
> Sorry to resurect this, but before diving deep into details, do anyone
> of you verified JPEG capture with ov5640 and i.MX6 platforms, and has
> maybe a pipeline configuration to share :) ?
I have a 4.14 kernel for my i.MX6D/Q using an ov5640 connected in a
similar way as the sabresd and I'm getting similar timeouts.
when executing
media-ctl -l "'ov5640 2-0010':0 -> 'imx6-mipi-csi2':0[1]"
media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]"
media-ctl -l "'ipu1_csi1':1 -> 'ipu1_ic_prp':0[1]"
media-ctl -l "'ipu1_ic_prp':1 -> 'ipu1_ic_prpenc':0[1]"
media-ctl -l "'ipu1_ic_prpenc':1 -> 'ipu1_ic_prpenc capture':0[1]"
media-ctl -V "'ov5640 2-0010':0 [fmt:UYVY2X8/640x480 field:none]"
media-ctl -V "'imx6-mipi-csi2':2 [fmt:UYVY2X8/640x480 field:none]"
media-ctl -V "'ipu1_csi1':1 [fmt:AYUV32/640x480 field:none]"
media-ctl -V "'ipu1_ic_prp':1 [fmt:AYUV32/640x480 field:none]"
media-ctl -V "'ipu1_ic_prpenc':1 [fmt:AYUV32/640x480 field:none]"
gst-launch-1.0 -v v4l2src num-buffers=1 device=/dev/video0 ! jpegenc
! filesink location=test.jpg
[ 72.799015] ipu1_ic_prpenc: EOF timeout
[ 73.838985] ipu1_ic_prpenc: wait last EOF timeout
When I try to jump directly to 4.19-RC8, I get errors regarding memory
allocation, so I think there might be something else there I am
missing.
Has anyone tried this camera module on a 4.14 kernel? I noticed there
are a bunch of driver updates, and I was hoping there might be some
patches that could be be backported to the 4.14.y stable branch.
thanks for any suggestions to try.
adam
>
> Thanks
> j
>
> >
> > I've followed these[1] instructions to configure MC links and pads
> > based on the probing details from dmesg and trying to capture
> > ipu1_ic_prpenc capture (/dev/video1) but it's not working.
> >
> > Can anyone help me to verify whether I configured all the details
> > properly if not please suggest.
> >
> > I'm pasting full log here, so-that anyone can comment in line and dt
> > changes are at [2]
> >
> > Log:
> > -----
> >
> > [ 1.211866] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0
> > [ 1.220211] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 0
> > [ 1.230344] imx-ipuv3 2400000.ipu: IPUv3H probed
> > [ 1.237170] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> > [ 1.243920] [drm] No driver support for vblank timestamp query.
> > [ 1.250831] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops
> > ipu_crtc_ops)
> > [ 1.258503] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops
> > ipu_crtc_ops)
> > [ 1.266293] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops
> > ipu_crtc_ops)
> > [ 1.274027] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops
> > ipu_crtc_ops)
> > [ 1.282304] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller
> > v1.30a with HDCP (DWC HDMI 3D TX PHY)
> > [ 1.295722] imx-drm display-subsystem: bound 120000.hdmi (ops
> > dw_hdmi_imx_ops)
> > [ 1.373615] Console: switching to colour frame buffer device 128x48
> > [ 1.396495] imx-drm display-subsystem: fb0: frame buffer device
> > [ 1.404620] [drm] Initialized imx-drm 1.0.0 20120507 for
> > display-subsystem on minor 1
> > [ 1.412763] imx-ipuv3 2800000.ipu: IPUv3H probed
> > [ 1.439673] brd: module loaded
> > [ 1.469099] loop: module loaded
> > [ 1.480324] nand: No NAND device found
> > [ 1.487768] libphy: Fixed MDIO Bus: probed
> > [ 1.493034] CAN device driver interface
> > [ 1.499057] fec 2188000.ethernet: 2188000.ethernet supply phy not
> > found, using dummy regulator
> > [ 1.511633] pps pps0: new PPS source ptp0
> > [ 1.516928] fec 2188000.ethernet (unnamed net_device)
> > (uninitialized): Invalid MAC address: 00:00:00:00:00:00
> > [ 1.527177] fec 2188000.ethernet (unnamed net_device)
> > (uninitialized): Using random MAC address: f2:5a:6d:a6:90:74
> > [ 1.543567] libphy: fec_enet_mii_bus: probed
> > [ 1.549138] fec 2188000.ethernet eth0: registered PHC device 0
> > [ 1.556499] usbcore: registered new interface driver asix
> > [ 1.562066] usbcore: registered new interface driver ax88179_178a
> > [ 1.568259] usbcore: registered new interface driver cdc_ether
> > [ 1.574276] usbcore: registered new interface driver net1080
> > [ 1.580097] usbcore: registered new interface driver cdc_subset
> > [ 1.586144] usbcore: registered new interface driver zaurus
> > [ 1.591910] usbcore: registered new interface driver cdc_ncm
> > [ 1.597589] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> > [ 1.604209] ehci-pci: EHCI PCI platform driver
> > [ 1.608760] ehci-mxc: Freescale On-Chip EHCI Host driver
> > [ 1.614851] usbcore: registered new interface driver usb-storage
> > [ 1.629947] ci_hdrc ci_hdrc.0: EHCI Host Controller
> > [ 1.635066] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
> > [ 1.669473] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
> > [ 1.677809] hub 1-0:1.0: USB hub found
> > [ 1.681902] hub 1-0:1.0: 1 port detected
> > [ 1.692839] ci_hdrc ci_hdrc.1: EHCI Host Controller
> > [ 1.697791] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2
> > [ 1.729537] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
> > [ 1.736740] hub 2-0:1.0: USB hub found
> > [ 1.740655] hub 2-0:1.0: 1 port detected
> > [ 1.753468] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered
> > 20cc000.snvs:snvs-rtc-lp as rtc0
> > [ 1.762976] i2c /dev entries driver
> > [ 1.811339] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
> > [ 1.817865] Bluetooth: HCI UART driver ver 2.3
> > [ 1.822460] Bluetooth: HCI UART protocol H4 registered
> > [ 1.828297] Bluetooth: HCI UART protocol LL registered
> > [ 1.834774] sdhci: Secure Digital Host Controller Interface driver
> > [ 1.841059] sdhci: Copyright(c) Pierre Ossman
> > [ 1.845437] sdhci-pltfm: SDHCI platform and OF driver helper
> > [ 1.852834] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO
> > [ 1.893497] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc]
> > using ADMA
> > [ 1.937500] mmc1: SDHCI controller on 2198000.usdhc [2198000.usdhc]
> > using ADMA
> > [ 1.945049] mmc0: host does not support reading read-only switch,
> > assuming write-enable
> > [ 1.959799] mmc0: new high speed SDHC card at address 1234
> > [ 1.968363] mmcblk0: mmc0:1234 SA04G 3.71 GiB
> > [ 1.977984] caam 2100000.caam: Entropy delay = 3200
> > [ 2.043796] caam 2100000.caam: Instantiated RNG4 SH0
> > [ 2.104558] caam 2100000.caam: Instantiated RNG4 SH1
> > [ 2.109596] caam 2100000.caam: device ID = 0x0a16010000000000 (Era 4)
> > [ 2.116060] caam 2100000.caam: job rings = 2, qi = 0, dpaa2 = no
> > [ 2.139266] caam algorithms registered in /proc/crypto
> > [ 2.139341] mmcblk0: p1 p2
> > [ 2.150910] caam_jr 2101000.jr0: registering rng-caam
> > [ 2.157327] usbcore: registered new interface driver usbhid
> > [ 2.163103] usbhid: USB HID core driver
> > [ 2.171149] imx-media: subdev ov5640 2-003c bound
> > [ 2.176631] imx-media: subdev ipu1_vdic bound
> > [ 2.181640] imx-media: subdev ipu2_vdic bound
> > [ 2.183831] mmc1: new high speed MMC card at address 0001
> > [ 2.186357] imx-media: subdev ipu1_ic_prp bound
> > [ 2.193649] mmcblk1: mmc1:0001 M62704 3.53 GiB
> > [ 2.197342] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video0
> > [ 2.202620] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB
> > [ 2.208083] imx-media: subdev ipu1_ic_prpenc bound
> > [ 2.215764] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB
> > [ 2.219512] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video1
> > [ 2.231868] imx-media: subdev ipu1_ic_prpvf bound
> > [ 2.232186] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB,
> > chardev (244:0)
> > [ 2.236748] imx-media: subdev ipu2_ic_prp bound
> > [ 2.245958] mmcblk1: p1 p2
> > [ 2.251569] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video2
> > [ 2.258696] imx-media: subdev ipu2_ic_prpenc bound
> > [ 2.264108] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video3
> > [ 2.271119] imx-media: subdev ipu2_ic_prpvf bound
> > [ 2.277042] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video4
> > [ 2.283312] imx-media: subdev ipu1_csi0 bound
> > [ 2.288312] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video5
> > [ 2.294583] imx-media: subdev ipu1_csi1 bound
> > [ 2.299694] ipu2_csi0: Registered ipu2_csi0 capture as /dev/video6
> > [ 2.305902] imx-media: subdev ipu2_csi0 bound
> > [ 2.310953] ipu2_csi1: Registered ipu2_csi1 capture as /dev/video7
> > [ 2.317162] imx-media: subdev ipu2_csi1 bound
> > [ 2.322293] imx-media: subdev imx6-mipi-csi2 bound
> > [ 2.336025] sgtl5000 2-000a: Error reading chip id -6
> > [ 2.346932] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW
> > [ 2.360345] NET: Registered protocol family 10
> > [ 2.367761] Segment Routing with IPv6
> > [ 2.371704] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
> > [ 2.379180] NET: Registered protocol family 17
> > [ 2.383872] can: controller area network core (rev 20170425 abi 9)
> > [ 2.390281] NET: Registered protocol family 29
> > [ 2.394756] can: raw protocol (rev 20170425)
> > [ 2.399126] can: broadcast manager protocol (rev 20170425 t)
> > [ 2.404869] can: netlink gateway (rev 20170425) max_hops=1
> > [ 2.410989] Key type dns_resolver registered
> > [ 2.420041] Registering SWP/SWPB emulation handler
> > [ 2.426337] Loading compiled-in X.509 certificates
> > [ 2.505422] imx-media: subdev ipu1_csi0_mux bound
> > [ 2.511142] imx-media: subdev ipu2_csi1_mux bound
> > [ 2.515930] imx-media: imx6-mipi-csi2:4 -> ipu2_csi1_mux:0
> > [ 2.518384] random: fast init done
> > [ 2.521600] imx-media: imx6-mipi-csi2:1 -> ipu1_csi0_mux:0
> > [ 2.530561] imx-media: ov5640 2-003c:0 -> imx6-mipi-csi2:0
> > [ 2.536094] imx-media: ipu2_csi1:1 -> ipu2_ic_prp:0
> > [ 2.541052] imx-media: ipu2_csi1:1 -> ipu2_vdic:0
> > [ 2.545801] imx-media: ipu2_csi1_mux:2 -> ipu2_csi1:0
> > [ 2.550932] imx-media: ipu2_csi0:1 -> ipu2_ic_prp:0
> > [ 2.555837] imx-media: ipu2_csi0:1 -> ipu2_vdic:0
> > [ 2.560629] imx-media: imx6-mipi-csi2:3 -> ipu2_csi0:0
> > [ 2.565800] imx-media: ipu1_csi1:1 -> ipu1_ic_prp:0
> > [ 2.570750] imx-media: ipu1_csi1:1 -> ipu1_vdic:0
> > [ 2.575497] imx-media: imx6-mipi-csi2:2 -> ipu1_csi1:0
> > [ 2.580716] imx-media: ipu1_csi0:1 -> ipu1_ic_prp:0
> > [ 2.585623] imx-media: ipu1_csi0:1 -> ipu1_vdic:0
> > [ 2.590411] imx-media: ipu1_csi0_mux:2 -> ipu1_csi0:0
> > [ 2.595499] imx-media: ipu2_ic_prp:1 -> ipu2_ic_prpenc:0
> > [ 2.600901] imx-media: ipu2_ic_prp:2 -> ipu2_ic_prpvf:0
> > [ 2.606159] imx-media: ipu1_ic_prp:1 -> ipu1_ic_prpenc:0
> > [ 2.611548] imx-media: ipu1_ic_prp:2 -> ipu1_ic_prpvf:0
> > [ 2.616803] imx-media: ipu2_vdic:2 -> ipu2_ic_prp:0
> > [ 2.621754] imx-media: ipu1_vdic:2 -> ipu1_ic_prp:0
> > [ 2.637015] imx_thermal tempmon: Industrial CPU temperature grade -
> > max:105C critical:100C passive:95C
> > [ 2.650475] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock
> > to 1970-01-01 00:00:00 UTC (0)
> > [ 2.659880] cfg80211: Loading compiled-in X.509 certificates for
> > regulatory database
> > [ 2.674031] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
> > [ 2.682013] platform regulatory.0: Direct firmware load for
> > regulatory.db failed with error -2
> > [ 2.690851] cfg80211: failed to load regulatory.db
> > [ 2.695737] ALSA device list:
> > [ 2.698762] No soundcards found.
> > [ 3.592224] EXT4-fs (mmcblk0p2): recovery complete
> > [ 3.602020] EXT4-fs (mmcblk0p2): mounted filesystem with ordered
> > data mode. Opts: (null)
> > [ 3.610371] VFS: Mounted root (ext4 filesystem) on device 179:2.
> > [ 3.618708] devtmpfs: mounted
> > [ 3.624665] Freeing unused kernel memory: 1024K
> > [ 3.743951] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
> > Starting logging: OK
> > Initializing random number generator... [ 3.897748] random: dd:
> > uninitialized urandom read (512 bytes read)
> > done.
> > Starting network: OK
> >
> > Welcome to Engicam i.CoreM6 Quad/Dual/DualLite/Solo
> > buildroot login: root
> > # media-ctl -l "'ov5640 2-003c':0 -> 'imx6-mipi-csi2':0[1]"
> > # media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]"
> > # media-ctl -l "'ipu1_csi1':1 -> 'ipu1_ic_prp':0[1]"
> > # media-ctl -l "'ipu1_ic_prp':1 -> 'ipu1_ic_prpenc':0[1]"
> > # media-ctl -l "'ipu1_ic_prpenc':1 -> 'ipu1_ic_prpenc capture':0[1]"
> > # media-ctl -V "'ov5640 2-003c':0 [fmt:UYVY2X8/640x480 field:none]"
> > # media-ctl -V "'imx6-mipi-csi2':2 [fmt:UYVY2X8/640x480 field:none]"
> > # media-ctl -V "'ipu1_csi1':1 [fmt:AYUV32/640x480 field:none]"
> > # media-ctl -V "'ipu1_ic_prp':1 [fmt:AYUV32/640x480 field:none]"
> > # media-ctl -V "'ipu1_ic_prpenc':1 [fmt:AYUV32/640x480 field:none]"
> > # med# media-ctl -p
> > Media controller API version 4.17.0
> >
> > Media device information
> > ------------------------
> > driver imx-media
> > model imx-media
> > serial
> > bus info
> > hw revision 0x0
> > driver version 4.17.0
> >
> > Device topology
> > - entity 1: ov5640 2-003c (1 pad, 1 link)
> > type V4L2 subdev subtype Sensor flags 0
> > device node name /dev/v4l-subdev0
> > pad0: Source
> > [fmt:UYVY8_2X8/640x480 field:none]
> > -> "imx6-mipi-csi2":0 [ENABLED]
> >
> > - entity 3: ipu1_vdic (3 pads, 3 links)
> > type V4L2 subdev subtype Unknown flags 0
> > device node name /dev/v4l-subdev1
> > pad0: Sink
> > [fmt:AYUV8_1X32/640x480 field:none]
> > <- "ipu1_csi0":1 []
> > <- "ipu1_csi1":1 []
> > pad1: Sink
> > [fmt:UYVY8_2X8/640x480 field:none]
> > pad2: Source
> > [fmt:AYUV8_1X32/640x480 field:none]
> > -> "ipu1_ic_prp":0 []
> >
> > - entity 7: ipu2_vdic (3 pads, 3 links)
> > type V4L2 subdev subtype Unknown flags 0
> > device node name /dev/v4l-subdev2
> > pad0: Sink
> > [fmt:AYUV8_1X32/640x480 field:none]
> > <- "ipu2_csi0":1 []
> > <- "ipu2_csi1":1 []
> > pad1: Sink
> > [fmt:UYVY8_2X8/640x480 field:none]
> > pad2: Source
> > [fmt:AYUV8_1X32/640x480 field:none]
> > -> "ipu2_ic_prp":0 []
> >
> > - entity 11: ipu1_ic_prp (3 pads, 5 links)
> > type V4L2 subdev subtype Unknown flags 0
> > device node name /dev/v4l-subdev3
> > pad0: Sink
> > [fmt:AYUV8_1X32/640x480 field:none]
> > <- "ipu1_vdic":2 []
> > <- "ipu1_csi0":1 []
> > <- "ipu1_csi1":1 [ENABLED]
> > pad1: Source
> > [fmt:AYUV8_1X32/640x480 field:none]
> > -> "ipu1_ic_prpenc":0 [ENABLED]
> > pad2: Source
> > [fmt:AYUV8_1X32/640x480 field:none]
> > -> "ipu1_ic_prpvf":0 []
> >
> > - entity 15: ipu1_ic_prpenc (2 pads, 2 links)
> > type V4L2 subdev subtype Unknown flags 0
> > device node name /dev/v4l-subdev4
> > pad0: Sink
> > [fmt:AYUV8_1X32/640x480 field:none]
> > <- "ipu1_ic_prp":1 [ENABLED]
> > pad1: Source
> > [fmt:AYUV8_1X32/640x480 field:none]
> > -> "ipu1_ic_prpenc capture":0 [ENABLED]
> >
> > - entity 18: ipu1_ic_prpenc capture (1 pad, 1 link)
> > type Node subtype V4L flags 0
> > device node name /dev/video0
> > pad0: Sink
> > <- "ipu1_ic_prpenc":1 [ENABLED]
> >
> > - entity 24: ipu1_ic_prpvf (2 pads, 2 links)
> > type V4L2 subdev subtype Unknown flags 0
> > device node name /dev/v4l-subdev5
> > pad0: Sink
> > [fmt:AYUV8_1X32/640x480 field:none]
> > <- "ipu1_ic_prp":2 []
> > pad1: Source
> > [fmt:AYUV8_1X32/640x480 field:none]
> > -> "ipu1_ic_prpvf capture":0 []
> >
> > - entity 27: ipu1_ic_prpvf capture (1 pad, 1 link)
> > type Node subtype V4L flags 0
> > device node name /dev/video1
> > pad0: Sink
> > <- "ipu1_ic_prpvf":1 []
> >
> > - entity 33: ipu2_ic_prp (3 pads, 5 links)
> > type V4L2 subdev subtype Unknown flags 0
> > device node name /dev/v4l-subdev6
> > pad0: Sink
> > [fmt:AYUV8_1X32/640x480 field:none]
> > <- "ipu2_vdic":2 []
> > <- "ipu2_csi0":1 []
> > <- "ipu2_csi1":1 []
> > pad1: Source
> > [fmt:AYUV8_1X32/640x480 field:none]
> > -> "ipu2_ic_prpenc":0 []
> > pad2: Source
> > [fmt:AYUV8_1X32/640x480 field:none]
> > -> "ipu2_ic_prpvf":0 []
> >
> > - entity 37: ipu2_ic_prpenc (2 pads, 2 links)
> > type V4L2 subdev subtype Unknown flags 0
> > device node name /dev/v4l-subdev7
> > pad0: Sink
> > [fmt:AYUV8_1X32/640x480 field:none]
> > <- "ipu2_ic_prp":1 []
> > pad1: Source
> > [fmt:AYUV8_1X32/640x480 field:none]
> > -> "ipu2_ic_prpenc capture":0 []
> >
> > - entity 40: ipu2_ic_prpenc capture (1 pad, 1 link)
> > type Node subtype V4L flags 0
> > device node name /dev/video2
> > pad0: Sink
> > <- "ipu2_ic_prpenc":1 []
> >
> > - entity 46: ipu2_ic_prpvf (2 pads, 2 links)
> > type V4L2 subdev subtype Unknown flags 0
> > device node name /dev/v4l-subdev8
> > pad0: Sink
> > [fmt:AYUV8_1X32/640x480 field:none]
> > <- "ipu2_ic_prp":2 []
> > pad1: Source
> > [fmt:AYUV8_1X32/640x480 field:none]
> > -> "ipu2_ic_prpvf capture":0 []
> >
> > - entity 49: ipu2_ic_prpvf capture (1 pad, 1 link)
> > type Node subtype V4L flags 0
> > device node name /dev/video3
> > pad0: Sink
> > <- "ipu2_ic_prpvf":1 []
> >
> > - entity 55: ipu1_csi0 (3 pads, 4 links)
> > type V4L2 subdev subtype Unknown flags 0
> > device node name /dev/v4l-subdev9
> > pad0: Sink
> > [fmt:UYVY8_2X8/640x480 field:none
> > crop.bounds:(0,0)/640x480
> > crop:(0,0)/640x480
> > compose.bounds:(0,0)/640x480
> > compose:(0,0)/640x480]
> > <- "ipu1_csi0_mux":2 []
> > pad1: Source
> > [fmt:AYUV8_1X32/640x480 field:none]
> > -> "ipu1_ic_prp":0 []
> > -> "ipu1_vdic":0 []
> > pad2: Source
> > [fmt:AYUV8_1X32/640x480 field:none]
> > -> "ipu1_csi0 capture":0 []
> >
> > - entity 59: ipu1_csi0 capture (1 pad, 1 link)
> > type Node subtype V4L flags 0
> > device node name /dev/video4
> > pad0: Sink
> > <- "ipu1_csi0":2 []
> >
> > - entity 65: ipu1_csi1 (3 pads, 4 links)
> > type V4L2 subdev subtype Unknown flags 0
> > device node name /dev/v4l-subdev10
> > pad0: Sink
> > [fmt:UYVY8_2X8/640x480 field:none
> > crop.bounds:(0,0)/640x480
> > crop:(0,0)/640x480
> > compose.bounds:(0,0)/640x480
> > compose:(0,0)/640x480]
> > <- "imx6-mipi-csi2":2 [ENABLED]
> > pad1: Source
> > [fmt:AYUV8_1X32/640x480 field:none]
> > -> "ipu1_ic_prp":0 [ENABLED]
> > -> "ipu1_vdic":0 []
> > pad2: Source
> > [fmt:AYUV8_1X32/640x480 field:none]
> > -> "ipu1_csi1 capture":0 []
> >
> > - entity 69: ipu1_csi1 capture (1 pad, 1 link)
> > type Node subtype V4L flags 0
> > device node name /dev/video5
> > pad0: Sink
> > <- "ipu1_csi1":2 []
> >
> > - entity 75: ipu2_csi0 (3 pads, 4 links)
> > type V4L2 subdev subtype Unknown flags 0
> > device node name /dev/v4l-subdev11
> > pad0: Sink
> > [fmt:UYVY8_2X8/640x480 field:none
> > crop.bounds:(0,0)/640x480
> > crop:(0,0)/640x480
> > compose.bounds:(0,0)/640x480
> > compose:(0,0)/640x480]
> > <- "imx6-mipi-csi2":3 []
> > pad1: Source
> > [fmt:AYUV8_1X32/640x480 field:none]
> > -> "ipu2_ic_prp":0 []
> > -> "ipu2_vdic":0 []
> > pad2: Source
> > [fmt:AYUV8_1X32/640x480 field:none]
> > -> "ipu2_csi0 capture":0 []
> >
> > - entity 79: ipu2_csi0 capture (1 pad, 1 link)
> > type Node subtype V4L flags 0
> > device node name /dev/video6
> > pad0: Sink
> > <- "ipu2_csi0":2 []
> >
> > - entity 85: ipu2_csi1 (3 pads, 4 links)
> > type V4L2 subdev subtype Unknown flags 0
> > device node name /dev/v4l-subdev12
> > pad0: Sink
> > [fmt:UYVY8_2X8/640x480 field:none
> > crop.bounds:(0,0)/640x480
> > crop:(0,0)/640x480
> > compose.bounds:(0,0)/640x480
> > compose:(0,0)/640x480]
> > <- "ipu2_csi1_mux":2 []
> > pad1: Source
> > [fmt:AYUV8_1X32/640x480 field:none]
> > -> "ipu2_ic_prp":0 []
> > -> "ipu2_vdic":0 []
> > pad2: Source
> > [fmt:AYUV8_1X32/640x480 field:none]
> > -> "ipu2_csi1 capture":0 []
> >
> > - entity 89: ipu2_csi1 capture (1 pad, 1 link)
> > type Node subtype V4L flags 0
> > device node name /dev/video7
> > pad0: Sink
> > <- "ipu2_csi1":2 []
> >
> > - entity 95: imx6-mipi-csi2 (5 pads, 5 links)
> > type V4L2 subdev subtype Unknown flags 0
> > device node name /dev/v4l-subdev13
> > pad0: Sink
> > [fmt:UYVY8_2X8/640x480 field:none]
> > <- "ov5640 2-003c":0 [ENABLED]
> > pad1: Source
> > [fmt:UYVY8_2X8/640x480 field:none]
> > -> "ipu1_csi0_mux":0 []
> > pad2: Source
> > [fmt:UYVY8_2X8/640x480 field:none]
> > -> "ipu1_csi1":0 [ENABLED]
> > pad3: Source
> > [fmt:UYVY8_2X8/640x480 field:none]
> > -> "ipu2_csi0":0 []
> > pad4: Source
> > [fmt:UYVY8_2X8/640x480 field:none]
> > -> "ipu2_csi1_mux":0 []
> >
> > - entity 101: ipu1_csi0_mux (3 pads, 2 links)
> > type V4L2 subdev subtype Unknown flags 0
> > device node name /dev/v4l-subdev14
> > pad0: Sink
> > [fmt:unknown/0x0]
> > <- "imx6-mipi-csi2":1 []
> > pad1: Sink
> > [fmt:unknown/0x0]
> > pad2: Source
> > [fmt:unknown/0x0]
> > -> "ipu1_csi0":0 []
> >
> > - entity 105: ipu2_csi1_mux (3 pads, 2 links)
> > type V4L2 subdev subtype Unknown flags 0
> > device node name /dev/v4l-subdev15
> > pad0: Sink
> > [fmt:unknown/0x0]
> > <- "imx6-mipi-csi2":4 []
> > pad1: Sink
> > [fmt:unknown/0x0]
> > pad2: Source
> > [fmt:unknown/0x0]
> > -> "ipu2_csi1":0 []
> >
> > # GST_DEBUG="v4l2*:5" gst-launch-1.0 -v v4l2src device=/dev/video1 ! \
> > > autovideosink
> > 0:00:01.086281666 185 0x1dce880 DEBUG v4l2
> > gstv4l2object.c:1487:gst_v4l2_object_v4l1
> > 0:00:01.087369666 185 0x1dce880 DEBUG v4l2
> > gstv4l2object.c:1487:gst_v4l2_object_v4l5
> > 0:00:01.088496000 185 0x1dce880 DEBUG v4l2
> > gstv4l2object.c:1487:gst_v4l2_object_v4l.
> > 0:00:01.089540333 185 0x1dce880 DEBUG v4l2
> > gstv4l2object.c:1487:gst_v4l2_object_v4lR
> > 0:00:01.090494666 185 0x1dce880 DEBUG v4l2
> > gstv4l2object.c:1487:gst_v4l2_object_v4lH
> > 0:00:01.091657666 185 0x1dce880 DEBUG v4l2
> > gstv4l2object.c:1487:gst_v4l2_object_v4l4
> > 0:00:01.092745000 185 0x1dce880 DEBUG v4l2
> > gstv4l2object.c:1487:gst_v4l2_object_v4l
> > 0:00:01.093703333 185 0x1dce880 DEBUG v4l2
> > gstv4l2object.c:1487:gst_v4l2_object_v4l
> > 0:00:01.094854000 185 0x1dce880 DEBUG v4l2
> > gstv4l2object.c:1487:gst_v4l2_object_v4l
> > 0:00:01.095815000 185 0x1dce880 DEBUG v4l2
> > gstv4l2object.c:1487:gst_v4l2_object_v4l
> > 0:00:01.096818666 185 0x1dce880 DEBUG v4l2
> > gstv4l2object.c:1487:gst_v4l2_object_v4lB
> > 0:00:01.097819000 185 0x1dce880 DEBUG v4l2
> > gstv4l2object.c:1487:gst_v4l2_object_v4l8
> > 0:00:01.098771000 185 0x1dce880 DEBUG v4l2
> > gstv4l2object.c:1487:gst_v4l2_object_v4l
> > 0:00:01.099798666 185 0x1dce880 DEBUG v4l2
> > gstv4l2object.c:1487:gst_v4l2_object_v4l1
> > 0:00:01.100776666 185 0x1dce880 DEBUG v4l2
> > gstv4l2object.c:1487:gst_v4l2_object_v4lV
> > 0:00:01.101755333 185 0x1dce880 DEBUG v4l2
> > gstv4l2object.c:1487:gst_v4l2_object_v4lY
> > 0:00:01.102771666 185 0x1dce880 DEBUG v4l2
> > gstv4l2object.c:1487:gst_v4l2_object_v4lP
> > 0:00:01.103712000 185 0x1dce880 DEBUG v4l2
> > gstv4l2object.c:1487:gst_v4l2_object_v4l4
> > 0:00:01.104720000 185 0x1dce880 DEBUG v4l2
> > gstv4l2object.c:1487:gst_v4l2_object_v4lO
> > 0:00:01.105697000 185 0x1dce880 DEBUG v4l2
> > gstv4l2object.c:1487:gst_v4l2_object_v4lP
> > 0:00:01.106629666 185 0x1dce880 DEBUG v4l2
> > gstv4l2object.c:1487:gst_v4l2_object_v4l4
> > 0:00:01.107681666 185 0x1dce880 DEBUG v4l2
> > gstv4l2object.c:1487:gst_v4l2_object_v4l4
> > 0:00:01.108660666 185 0x1dce880 DEBUG v4l2
> > gstv4l2object.c:1487:gst_v4l2_object_v4l2
> > 0:00:01.442437333 185 0x1dce880 DEBUG v4l2
> > gstv4l2object.c:1487:gst_v4l2_object_v4l0
> > 0:00:01.444673333 185 0x1dce880 DEBUG v4l2
> > gstv4l2object.c:1487:gst_v4l2_object_v4l2
> > 0:00:01.446842000 185 0x1dce880 DEBUG v4l2
> > gstv4l2object.c:1487:gst_v4l2_object_v4l2
> > 0:00:01.449084000 185 0x1dce880 DEBUG v4l2
> > gstv4l2object.c:1487:gst_v4l2_object_v4l4
> > Setting pipeline to PAUSED ...
> > 0:00:01.680823000 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:524:gst_v4l2_open:<v4l2src01
> > 0:00:01.681953333 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:69:gst_v4l2_get_capabilities
> > 0:00:01.683098666 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:140:gst_v4l2_fill_lists:<v4s
> > 0:00:01.684056666 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:143:gst_v4l2_fill_lists:<v4s
> > 0:00:01.685201000 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:215:gst_v4l2_fill_lists:<v4s
> > 0:00:01.686159333 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > 0:00:01.687207666 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:257:gst_v4l2_fill_lists:<v4C
> > 0:00:01.688183666 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > 0:00:01.689155333 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:257:gst_v4l2_fill_lists:<v4M
> > 0:00:01.690142000 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > 0:00:01.691114000 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:257:gst_v4l2_fill_lists:<v4P
> > 0:00:01.692080000 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > 0:00:01.693073000 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:257:gst_v4l2_fill_lists:<v4R
> > 0:00:01.694043000 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > 0:00:01.695760000 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:257:gst_v4l2_fill_lists:<v4L
> > 0:00:01.696736333 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > 0:00:01.697708000 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:257:gst_v4l2_fill_lists:<v4G
> > 0:00:01.698699000 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > 0:00:01.699667000 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:257:gst_v4l2_fill_lists:<v4H
> > 0:00:01.700633000 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > 0:00:01.701623666 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:257:gst_v4l2_fill_lists:<v4I
> > 0:00:01.702591000 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > 0:00:01.703554333 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:257:gst_v4l2_fill_lists:<v4K
> > 0:00:01.704604000 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > 0:00:01.705576666 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:257:gst_v4l2_fill_lists:<v4M
> > 0:00:01.706567000 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > 0:00:02.040204667 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:257:gst_v4l2_fill_lists:<v4B
> > 0:00:02.042194667 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > 0:00:02.044190000 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:257:gst_v4l2_fill_lists:<v4G
> > 0:00:02.046338333 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > 0:00:02.048327667 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:257:gst_v4l2_fill_lists:<v4H
> > 0:00:02.050296000 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > 0:00:02.052385000 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:257:gst_v4l2_fill_lists:<v4K
> > 0:00:02.054376000 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > 0:00:02.056461333 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:257:gst_v4l2_fill_lists:<v4L
> > 0:00:02.058434000 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > 0:00:02.060423667 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:257:gst_v4l2_fill_lists:<v4c
> > 0:00:02.062382667 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:263:gst_v4l2_fill_lists:<v4s
> > 0:00:02.064291333 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:283:gst_v4l2_fill_lists:<v40
> > 0:00:02.066224667 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:292:gst_v4l2_fill_lists:<v4.
> > 0:00:02.067190333 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:283:gst_v4l2_fill_lists:<v40
> > 0:00:02.068174333 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:300:gst_v4l2_fill_lists:<v40
> > 0:00:02.069141000 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:283:gst_v4l2_fill_lists:<v40
> > 0:00:02.070113000 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:305:gst_v4l2_fill_lists:<v4d
> > 0:00:02.071088333 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:456:gst_v4l2_fill_lists:<v4e
> > 0:00:02.072040000 185 0x1dce880 INFO v4l2
> > v4l2_calls.c:592:gst_v4l2_open:<v4l2src0y
> > 0:00:02.073017333 185 0x1dce880 DEBUG v4l2
> > gstv4l2object.c:804:gst_v4l2_set_default)
> > 0:00:02.074010667 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:740:gst_v4l2_get_norm:<v4l2m
> > 0:00:02.075021000 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:754:gst_v4l2_get_norm: Fail1
> > 0:00:02.076012000 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:1027:gst_v4l2_get_input:<v4t
> > Pipeline is live and does not need PREROLL ...
> > 0:00:02.080105333 185 0x1ec39b0 DEBUG v4l2
> > gstv4l2object.c:1109:gst_v4l2_object_fil.
> > <v4l2src0> getting src format enumerations
> > 0:00:02.412981333 185 0x1ec39b0 INFO New clock: GstSystemClock
> > v4l2 gstv4l2object.c:1146:gst_v4l2_object_fill_format_list:<v4l2src0>
> > got 7 format(s):
> > 0:00:02.415407667 185 0x1ec39b0 INFO v4l2
> > gstv4l2object.c:1152:gst_v4l2_object_filV
> > 0:00:02.417531667 185 0x1ec39b0 INFO v4l2
> > gstv4l2object.c:1152:gst_v4l2_object_filY
> > 0:00:02.419703667 185 0x1ec39b0 INFO v4l2
> > gstv4l2object.c:1152:gst_v4l2_object_filP
> > 0:00:02.421860000 185 0x1ec39b0 INFO v4l2
> > gstv4l2object.c:1152:gst_v4l2_object_fil2
> > 0:00:02.424022667 185 0x1ec39b0 INFO v4l2
> > gstv4l2object.c:1152:gst_v4l2_object_fil2
> > 0:00:02.426295000 185 0x1ec39b0 INFO v4l2
> > gstv4l2object.c:1152:gst_v4l2_object_fil6
> > 0:00:02.428481333 185 0x1ec39b0 INFO v4l2
> > gstv4l2object.c:1152:gst_v4l2_object_fil2
> > 0:00:02.430728333 185 0x1ec39b0 DEBUG v4l2
> > gstv4l2object.c:2564:gst_v4l2_object_proV
> > 0:00:02.432985333 185 0x1ec39b0 DEBUG v4l2
> > gstv4l2object.c:2691:gst_v4l2_object_pro)
> > 0:00:02.436117000 185 0x1ec39b0 DEBUG v4l2
> > gstv4l2object.c:2564:gst_v4l2_object_proY
> > 0:00:02.437252333 185 0x1ec39b0 DEBUG v4l2
> > gstv4l2object.c:2691:gst_v4l2_object_pro)
> > 0:00:02.438579000 185 0x1ec39b0 DEBUG v4l2
> > gstv4l2object.c:2564:gst_v4l2_object_proP
> > 0:00:02.439656000 185 0x1ec39b0 DEBUG v4l2
> > gstv4l2object.c:2691:gst_v4l2_object_pro)
> > 0:00:02.441016667 185 0x1ec39b0 DEBUG v4l2
> > gstv4l2object.c:2564:gst_v4l2_object_pro2
> > 0:00:02.442092333 185 0x1ec39b0 DEBUG v4l2
> > gstv4l2object.c:2691:gst_v4l2_object_pro)
> > 0:00:02.443443333 185 0x1ec39b0 DEBUG v4l2
> > gstv4l2object.c:2564:gst_v4l2_object_pro2
> > 0:00:02.444626667 185 0x1ec39b0 DEBUG v4l2
> > gstv4l2object.c:2691:gst_v4l2_object_pro)
> > 0:00:02.445990667 185 0x1ec39b0 DEBUG v4l2
> > gstv4l2object.c:2564:gst_v4l2_object_pro6
> > 0:00:02.447063667 185 0x1ec39b0 DEBUG v4l2
> > gstv4l2object.c:2691:gst_v4l2_object_pro)
> > 0:00:02.448410333 185 0x1ec39b0 DEBUG v4l2
> > gstv4l2object.c:2564:gst_v4l2_object_pro2
> > 0:00:02.782148333 185 0x1ec39b0 DEBUG v4l2
> > gstv4l2object.c:2691:gst_v4l2_object_pro)
> > 0:00:02.785264333 185 0x1ec39b0 INFO v4l2
> > gstv4l2object.c:3967:gst_v4l2_object_get}
> > 0:00:02.788800000 185 0x1ec39b0 DEBUG v4l2src
> > gstv4l2src.c:300:gst_v4l2src_negotiate:<}
> > 0:00:02.792207000 185 0x1ec39b0 DEBUG v4l2src
> > gstv4l2src.c:308:gst_v4l2src_negotiate:<]
> > 0:00:02.795419000 185 0x1ec39b0 DEBUG v4l2src
> > gstv4l2src.c:316:gst_v4l2src_negotiate:<}
> > 0:00:03.132052667 185 0x1ec39b0 DEBUG v4l2src
> > gstv4l2src.c:256:gst_v4l2src_fixate:<v4l}
> > 0:00:03.134399667 185 0x1ec39b0 DEBUG v4l2src
> > gstv4l2src.c:282:gst_v4l2src_fixate:<v4l}
> > 0:00:03.136800667 185 0x1ec39b0 DEBUG v4l2src
> > gstv4l2src.c:367:gst_v4l2src_negotiate:<1
> > 0:00:03.139067333 185 0x1ec39b0 DEBUG v4l2
> > gstv4l2object.c:3887:gst_v4l2_object_stog
> > 0:00:03.141452000 185 0x1ec39b0 DEBUG v4l2
> > gstv4l2object.c:3176:gst_v4l2_object_seto
> > 0:00:03.143608667 185 0x1ec39b0 DEBUG v4l2
> > gstv4l2object.c:3310:gst_v4l2_object_set0
> > 0:00:03.146025333 185 0x1ec39b0 DEBUG v4l2
> > gstv4l2object.c:3361:gst_v4l2_object_set1
> > 0:00:03.148229000 185 0x1ec39b0 DEBUG v4l2
> > gstv4l2object.c:3370:gst_v4l2_object_set0
> > 0:00:03.150373667 185 0x1ec39b0 DEBUG v4l2
> > gstv4l2object.c:3404:gst_v4l2_object_set1
> > 0:00:03.152589667 185 0x1ec39b0 DEBUG v4l2
> > gstv4l2object.c:3414:gst_v4l2_object_set0
> > 0:00:03.155250667 185 0x1ec39b0 DEBUG v4l2
> > gstv4l2object.c:3455:gst_v4l2_object_set1
> > 0:00:03.156584667 185 0x1ec39b0 DEBUG v4l2
> > gstv4l2object.c:3472:gst_v4l2_object_set1
> > 0:00:03.157659333 185 0x1ec39b0 INFO v4l2
> > gstv4l2object.c:3504:gst_v4l2_object_set1
> > 0:00:03.491432000 185 0x1ec39b0 DEBUG v4l2
> > gstv4l2object.c:2960:gst_v4l2_object_ext0
> > 0:00:03.493645333 185 0x1ec39b0 DEBUG v4l2
> > gstv4l2object.c:3071:gst_v4l2_object_sav0
> > 0:00:03.496027333 185 0x1ec39b0 DEBUG v4l2
> > gstv4l2object.c:2843:gst_v4l2_object_setm
> > 0:00:03.498180000 185 0x1ec39b0 INFO v4l2
> > gstv4l2object.c:2867:gst_v4l2_object_set2
> > 0:00:03.502772000 185 0x1ec39b0 DEBUG v4l2bufferpool
> > gstv4l2bufferpool.c:509:gst_v4l2_buffer_;
> > 0:00:03.505283333 185 0x1ec39b0 INFO v4l2bufferpool
> > gstv4l2bufferpool.c:557:gst_v4l2_buffer_2
> > 0:00:03.507120000 185 0x1ec39b0 INFO v4l2bufferpool
> > gstv4l2bufferpool.c:570:gst_v4l2_buffer_2
> > /GstPipeline:pipeline0/GstV4l2Src:v4l2src0.GstPad:src: caps =
> > video/x-raw, format=(string)YUY2, width=(i1
> > /GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0.GstGhostPad:sink.GstProxyPad:proxypad0:
> > caps = vi1
> > /GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0/GstKMSSink:autovideosink0-actual-sink-kms.GstPad:1
> > 0:00:03/GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0.GstGhostPad:sink:
> > caps = video/x-raw, form1
> > .512440000 185 0x1ec39b0 DEBUG v4l2
> > gstv4l2object.c:3985:gst_v4l2_object_decide_alln
> > 0:00:03.513556667 185 0x1ec39b0 DEBUG v4l2
> > gstv4l2object.c:4011:gst_v4l2_object_dec>
> > 0:00:03.514745667 185 0x1ec39b0 DEBUG v4l2
> > gstv4l2object.c:4069:gst_v4l2_object_dec>
> > 0:00:03.515889000 185 0x1ec39b0 DEBUG v4l2
> > gstv4l2object.c:4134:gst_v4l2_object_deca
> > 0:00:03.516969667 185 0x1ec39b0 DEBUG v4l2
> > gstv4l2object.c:4143:gst_v4l2_object_dec;
> > 0:00:03.851350333 185 0x1ec39b0 DEBUG v4l2bufferpool
> > gstv4l2bufferpool.c:509:gst_v4l2_buffer_2
> > ams)NULL, options=(string)< GstBufferPoolOptionVideoMeta >;
> > 0:00:03.853620333 185 0x1ec39b0 INFO v4l2bufferpool
> > gstv4l2bufferpool.c:570:gst_v4l2_buffer_2
> > 0:00:03.855780667 185 0x1ec39b0 DEBUG v4l2
> > gstv4l2object.c:4150:gst_v4l2_object_dec;
> > 0:00:03.858430000 185 0x1ec39b0 DEBUG v4l2bufferpool
> > gstv4l2bufferpool.c:509:gst_v4l2_buffer_;
> > 0:00:03.861572333 185 0x1ec39b0 DEBUG v4l2bufferpool
> > gstv4l2bufferpool.c:707:gst_v4l2_buffer_l
> > 0:00:03.863468333 185 0x1ec39b0 DEBUG v4l2bufferpool
> > gstv4l2bufferpool.c:737:gst_v4l2_buffer_s
> > 0:00:03.918861000 185 0x1ec39b0 DEBUG v4l2allocator
> > gstv4l2allocator.c:706:gst_v4l2_allocatod
> > 0:00:03.943783333 185 0x1ec39b0 DEBUG v4l2bufferpool
> > gstv4l2bufferpool.c:1389:gst_v4l2_buffer8
> > 0:00:03.946129333 185 0x1ec39b0 DEBUG v4l2bufferpool
> > gstv4l2bufferpool.c:1389:gst_v4l2_buffer8
> > 0:00:03.948065000 185 0x1ec39b0 DEBUG v4l2bufferpool
> > gstv4l2bufferpool.c:1389:gst_v4l2_buffer8
> > 0:00:03.950006000 185 0x1ec39b0 DEBUG v4l2bufferpool
> > gstv4l2bufferpool.c:952:gst_v4l2_buffer_g
> > 0:00:03.996241333 185 0x1ec39b0 ERROR v4l2bufferpool
> > gstv4l2bufferpool.c:641:gst_v4l2_buffer_)
> > 0:00:03.998199667 185 0x1ec39b0 DEBUG v4l2bufferpool
> > gstv4l2bufferpool.c:1311:gst_v4l2_buffere
> > 0:00:04.000463000 185 0x1ec39b0 WARN v4l2bufferpool
> > gstv4l2bufferpool.c:1064:gst_v4l2_buffer)
> > 0:00:04.004649333 185 0x1ec39b0 DEBUG v4l2bufferpool
> > gstv4l2bufferpool.c:1283:gst_v4l2_bufferr
> > 0:00:04.005853333 185 0x1ec39b0 WARN v4l2src
> > gstv4l2src.c:866:gst_v4l2src_create:<v4lr
> > ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Could
> > not read from resource.
> > Additional debug info:
> > gstv4l2bufferpool.c(1064): gst_v4l2_buffer_pool_poll ():
> > /GstPipeline:pipeline0/GstV4l2Src:v4l2src0:
> > poll error 1: Resource temporarily unavailable (11)
> > Execution ended after 0:00:01.606871334
> > Setting pipeline to PAUSED ...
> > 0:00:04.022385000 185 0x1dce880 DEBUG v4l2bufferpool
> > gstv4l2bufferpool.c:931:gst_v4l2_buffer_g
> > Setting pipeline to READY ...
> > 0:00:04.024850667 185 0x1dce880 DEBUG v4l2bufferpool
> > gstv4l2bufferpool.c:879:gst_v4l2_buffer_l
> > 0:00:04.026764000 185 0x1dce880 DEBUG v4l2allocator
> > gstv4l2allocator.c:757:gst_v4l2_allocator
> > 0:00:04.028598333 185 0x1dce880 DEBUG v4l2allocator
> > gstv4l2allocator.c:765:gst_v4l2_allocatoe
> > 0:00:04.362785667 185 0x1dce880 WARN v4l2bufferpool
> > gstv4l2bufferpool.c:918:gst_v4l2_buffer_g
> > 0:00:04.364712333 185 0x1dce880 DEBUG v4l2bufferpool
> > gstv4l2bufferpool.c:952:gst_v4l2_buffer_g
> > 0:00:04.366504333 185 0x1dce880 DEBUG v4l2bufferpool
> > gstv4l2bufferpool.c:629:gst_v4l2_buffer_g
> > 0:00:04.368607000 185 0x1dce880 DEBUG v4l2
> > gstv4l2object.c:3887:gst_v4l2_object_stog
> > 0:00:04.370713333 185 0x1dce880 DEBUG v4l2
> > gstv4l2object.c:3895:gst_v4l2_object_stol
> > 0:00:04.372809333 185 0x1dce880 DEBUG v4l2bufferpool
> > gstv4l2bufferpool.c:931:gst_v4l2_buffer_g
> > 0:00:04.374732000 185 0x1dce880 DEBUG v4l2bufferpool
> > gstv4l2bufferpool.c:879:gst_v4l2_buffer_l
> > 0:00:04.376541000 185 0x1dce880 DEBUG v4l2bufferpool
> > gstv4l2bufferpool.c:663:gst_v4l2_buffer_g
> > 0:00:04.378334000 185 0x1dce880 DEBUG v4l2allocator
> > gstv4l2allocator.c:757:gst_v4l2_allocator
> > Setting pipeline to NULL ...
> > 0:00:04.394764333 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:716:gst_v4l2_close:<v4l2src1
> > 0:00:04.395897667 185 0x1dce880 DEBUG v4l2
> > v4l2_calls.c:464:gst_v4l2_empty_lists:<vs
> > Freeing pipeline ...
> >
> > [1] https://linuxtv.org/downloads/v4l-dvb-apis/v4l-drivers/imx.html#sabresd-with-mipi-csi-2-ov5640
> > [2] https://paste.ubuntu.com/p/CTvFqdbyMW/
> >
> > Jagan.
> >
> > --
> > Jagan Teki
> > Senior Linux Kernel Engineer | Amarula Solutions
> > U-Boot, Linux | Upstream Maintainer
> > Hyderabad, India.
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
2018-10-16 19:46 ` Adam Ford
@ 2018-10-17 0:13 ` Steve Longerbeam
2018-10-17 8:01 ` jacopo mondi
0 siblings, 1 reply; 38+ messages in thread
From: Steve Longerbeam @ 2018-10-17 0:13 UTC (permalink / raw)
To: Adam Ford, jacopo
Cc: Jagan Teki, p.zabel, Fabio Estevam, gstreamer-devel, linux-media,
Linux Kernel Mailing List
Hi Adam,
On 10/16/18 12:46 PM, Adam Ford wrote:
> On Thu, Sep 20, 2018 at 9:58 AM jacopo mondi <jacopo@jmondi.org> wrote:
>> Hi imx6 people,
>>
>> On Thu, May 31, 2018 at 08:39:20PM +0530, Jagan Teki wrote:
>>> Hi All,
>>>
>>> I'm trying to verify MIPI-CSI2 OV5640 camera on i.MX6 platform with
>>> Mainline Linux.
>> Sorry to resurect this, but before diving deep into details, do anyone
>> of you verified JPEG capture with ov5640 and i.MX6 platforms, and has
>> maybe a pipeline configuration to share :) ?
>
> I have a 4.14 kernel for my i.MX6D/Q using an ov5640 connected in a
> similar way as the sabresd and I'm getting similar timeouts.
> when executing
>
> media-ctl -l "'ov5640 2-0010':0 -> 'imx6-mipi-csi2':0[1]"
> media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]"
You're routing through imx6-mipi-csi2 pad 2, which is CSI-2 virtual
channel 1, so make sure the ov5640 is transmitting on that channel,
see virtual_channel module parameter.
> media-ctl -l "'ipu1_csi1':1 -> 'ipu1_ic_prp':0[1]"
> media-ctl -l "'ipu1_ic_prp':1 -> 'ipu1_ic_prpenc':0[1]"
> media-ctl -l "'ipu1_ic_prpenc':1 -> 'ipu1_ic_prpenc capture':0[1]"
>
>
> media-ctl -V "'ov5640 2-0010':0 [fmt:UYVY2X8/640x480 field:none]"
> media-ctl -V "'imx6-mipi-csi2':2 [fmt:UYVY2X8/640x480 field:none]"
> media-ctl -V "'ipu1_csi1':1 [fmt:AYUV32/640x480 field:none]"
> media-ctl -V "'ipu1_ic_prp':1 [fmt:AYUV32/640x480 field:none]"
> media-ctl -V "'ipu1_ic_prpenc':1 [fmt:AYUV32/640x480 field:none]"
>
>
> gst-launch-1.0 -v v4l2src num-buffers=1 device=/dev/video0 ! jpegenc
> ! filesink location=test.jpg
>
> [ 72.799015] ipu1_ic_prpenc: EOF timeout
> [ 73.838985] ipu1_ic_prpenc: wait last EOF timeout
>
> When I try to jump directly to 4.19-RC8, I get errors regarding memory
> allocation, so I think there might be something else there I am
> missing.
>
> Has anyone tried this camera module on a 4.14 kernel? I noticed there
> are a bunch of driver updates, and I was hoping there might be some
> patches that could be be backported to the 4.14.y stable branch.
I would suggest backporting all the ov5640 commits. You can also
backport the imx-media commits, but that shouldn't be the cause
of the timeouts you are seeing.
Steve
>
> thanks for any suggestions to try.
>
> adam
>
>> Thanks
>> j
>>
>>> I've followed these[1] instructions to configure MC links and pads
>>> based on the probing details from dmesg and trying to capture
>>> ipu1_ic_prpenc capture (/dev/video1) but it's not working.
>>>
>>> Can anyone help me to verify whether I configured all the details
>>> properly if not please suggest.
>>>
>>> I'm pasting full log here, so-that anyone can comment in line and dt
>>> changes are at [2]
>>>
>>> Log:
>>> -----
>>>
>>> [ 1.211866] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0
>>> [ 1.220211] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 0
>>> [ 1.230344] imx-ipuv3 2400000.ipu: IPUv3H probed
>>> [ 1.237170] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>>> [ 1.243920] [drm] No driver support for vblank timestamp query.
>>> [ 1.250831] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops
>>> ipu_crtc_ops)
>>> [ 1.258503] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops
>>> ipu_crtc_ops)
>>> [ 1.266293] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops
>>> ipu_crtc_ops)
>>> [ 1.274027] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops
>>> ipu_crtc_ops)
>>> [ 1.282304] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller
>>> v1.30a with HDCP (DWC HDMI 3D TX PHY)
>>> [ 1.295722] imx-drm display-subsystem: bound 120000.hdmi (ops
>>> dw_hdmi_imx_ops)
>>> [ 1.373615] Console: switching to colour frame buffer device 128x48
>>> [ 1.396495] imx-drm display-subsystem: fb0: frame buffer device
>>> [ 1.404620] [drm] Initialized imx-drm 1.0.0 20120507 for
>>> display-subsystem on minor 1
>>> [ 1.412763] imx-ipuv3 2800000.ipu: IPUv3H probed
>>> [ 1.439673] brd: module loaded
>>> [ 1.469099] loop: module loaded
>>> [ 1.480324] nand: No NAND device found
>>> [ 1.487768] libphy: Fixed MDIO Bus: probed
>>> [ 1.493034] CAN device driver interface
>>> [ 1.499057] fec 2188000.ethernet: 2188000.ethernet supply phy not
>>> found, using dummy regulator
>>> [ 1.511633] pps pps0: new PPS source ptp0
>>> [ 1.516928] fec 2188000.ethernet (unnamed net_device)
>>> (uninitialized): Invalid MAC address: 00:00:00:00:00:00
>>> [ 1.527177] fec 2188000.ethernet (unnamed net_device)
>>> (uninitialized): Using random MAC address: f2:5a:6d:a6:90:74
>>> [ 1.543567] libphy: fec_enet_mii_bus: probed
>>> [ 1.549138] fec 2188000.ethernet eth0: registered PHC device 0
>>> [ 1.556499] usbcore: registered new interface driver asix
>>> [ 1.562066] usbcore: registered new interface driver ax88179_178a
>>> [ 1.568259] usbcore: registered new interface driver cdc_ether
>>> [ 1.574276] usbcore: registered new interface driver net1080
>>> [ 1.580097] usbcore: registered new interface driver cdc_subset
>>> [ 1.586144] usbcore: registered new interface driver zaurus
>>> [ 1.591910] usbcore: registered new interface driver cdc_ncm
>>> [ 1.597589] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>>> [ 1.604209] ehci-pci: EHCI PCI platform driver
>>> [ 1.608760] ehci-mxc: Freescale On-Chip EHCI Host driver
>>> [ 1.614851] usbcore: registered new interface driver usb-storage
>>> [ 1.629947] ci_hdrc ci_hdrc.0: EHCI Host Controller
>>> [ 1.635066] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
>>> [ 1.669473] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
>>> [ 1.677809] hub 1-0:1.0: USB hub found
>>> [ 1.681902] hub 1-0:1.0: 1 port detected
>>> [ 1.692839] ci_hdrc ci_hdrc.1: EHCI Host Controller
>>> [ 1.697791] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2
>>> [ 1.729537] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
>>> [ 1.736740] hub 2-0:1.0: USB hub found
>>> [ 1.740655] hub 2-0:1.0: 1 port detected
>>> [ 1.753468] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered
>>> 20cc000.snvs:snvs-rtc-lp as rtc0
>>> [ 1.762976] i2c /dev entries driver
>>> [ 1.811339] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
>>> [ 1.817865] Bluetooth: HCI UART driver ver 2.3
>>> [ 1.822460] Bluetooth: HCI UART protocol H4 registered
>>> [ 1.828297] Bluetooth: HCI UART protocol LL registered
>>> [ 1.834774] sdhci: Secure Digital Host Controller Interface driver
>>> [ 1.841059] sdhci: Copyright(c) Pierre Ossman
>>> [ 1.845437] sdhci-pltfm: SDHCI platform and OF driver helper
>>> [ 1.852834] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO
>>> [ 1.893497] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc]
>>> using ADMA
>>> [ 1.937500] mmc1: SDHCI controller on 2198000.usdhc [2198000.usdhc]
>>> using ADMA
>>> [ 1.945049] mmc0: host does not support reading read-only switch,
>>> assuming write-enable
>>> [ 1.959799] mmc0: new high speed SDHC card at address 1234
>>> [ 1.968363] mmcblk0: mmc0:1234 SA04G 3.71 GiB
>>> [ 1.977984] caam 2100000.caam: Entropy delay = 3200
>>> [ 2.043796] caam 2100000.caam: Instantiated RNG4 SH0
>>> [ 2.104558] caam 2100000.caam: Instantiated RNG4 SH1
>>> [ 2.109596] caam 2100000.caam: device ID = 0x0a16010000000000 (Era 4)
>>> [ 2.116060] caam 2100000.caam: job rings = 2, qi = 0, dpaa2 = no
>>> [ 2.139266] caam algorithms registered in /proc/crypto
>>> [ 2.139341] mmcblk0: p1 p2
>>> [ 2.150910] caam_jr 2101000.jr0: registering rng-caam
>>> [ 2.157327] usbcore: registered new interface driver usbhid
>>> [ 2.163103] usbhid: USB HID core driver
>>> [ 2.171149] imx-media: subdev ov5640 2-003c bound
>>> [ 2.176631] imx-media: subdev ipu1_vdic bound
>>> [ 2.181640] imx-media: subdev ipu2_vdic bound
>>> [ 2.183831] mmc1: new high speed MMC card at address 0001
>>> [ 2.186357] imx-media: subdev ipu1_ic_prp bound
>>> [ 2.193649] mmcblk1: mmc1:0001 M62704 3.53 GiB
>>> [ 2.197342] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video0
>>> [ 2.202620] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB
>>> [ 2.208083] imx-media: subdev ipu1_ic_prpenc bound
>>> [ 2.215764] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB
>>> [ 2.219512] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video1
>>> [ 2.231868] imx-media: subdev ipu1_ic_prpvf bound
>>> [ 2.232186] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB,
>>> chardev (244:0)
>>> [ 2.236748] imx-media: subdev ipu2_ic_prp bound
>>> [ 2.245958] mmcblk1: p1 p2
>>> [ 2.251569] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video2
>>> [ 2.258696] imx-media: subdev ipu2_ic_prpenc bound
>>> [ 2.264108] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video3
>>> [ 2.271119] imx-media: subdev ipu2_ic_prpvf bound
>>> [ 2.277042] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video4
>>> [ 2.283312] imx-media: subdev ipu1_csi0 bound
>>> [ 2.288312] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video5
>>> [ 2.294583] imx-media: subdev ipu1_csi1 bound
>>> [ 2.299694] ipu2_csi0: Registered ipu2_csi0 capture as /dev/video6
>>> [ 2.305902] imx-media: subdev ipu2_csi0 bound
>>> [ 2.310953] ipu2_csi1: Registered ipu2_csi1 capture as /dev/video7
>>> [ 2.317162] imx-media: subdev ipu2_csi1 bound
>>> [ 2.322293] imx-media: subdev imx6-mipi-csi2 bound
>>> [ 2.336025] sgtl5000 2-000a: Error reading chip id -6
>>> [ 2.346932] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW
>>> [ 2.360345] NET: Registered protocol family 10
>>> [ 2.367761] Segment Routing with IPv6
>>> [ 2.371704] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
>>> [ 2.379180] NET: Registered protocol family 17
>>> [ 2.383872] can: controller area network core (rev 20170425 abi 9)
>>> [ 2.390281] NET: Registered protocol family 29
>>> [ 2.394756] can: raw protocol (rev 20170425)
>>> [ 2.399126] can: broadcast manager protocol (rev 20170425 t)
>>> [ 2.404869] can: netlink gateway (rev 20170425) max_hops=1
>>> [ 2.410989] Key type dns_resolver registered
>>> [ 2.420041] Registering SWP/SWPB emulation handler
>>> [ 2.426337] Loading compiled-in X.509 certificates
>>> [ 2.505422] imx-media: subdev ipu1_csi0_mux bound
>>> [ 2.511142] imx-media: subdev ipu2_csi1_mux bound
>>> [ 2.515930] imx-media: imx6-mipi-csi2:4 -> ipu2_csi1_mux:0
>>> [ 2.518384] random: fast init done
>>> [ 2.521600] imx-media: imx6-mipi-csi2:1 -> ipu1_csi0_mux:0
>>> [ 2.530561] imx-media: ov5640 2-003c:0 -> imx6-mipi-csi2:0
>>> [ 2.536094] imx-media: ipu2_csi1:1 -> ipu2_ic_prp:0
>>> [ 2.541052] imx-media: ipu2_csi1:1 -> ipu2_vdic:0
>>> [ 2.545801] imx-media: ipu2_csi1_mux:2 -> ipu2_csi1:0
>>> [ 2.550932] imx-media: ipu2_csi0:1 -> ipu2_ic_prp:0
>>> [ 2.555837] imx-media: ipu2_csi0:1 -> ipu2_vdic:0
>>> [ 2.560629] imx-media: imx6-mipi-csi2:3 -> ipu2_csi0:0
>>> [ 2.565800] imx-media: ipu1_csi1:1 -> ipu1_ic_prp:0
>>> [ 2.570750] imx-media: ipu1_csi1:1 -> ipu1_vdic:0
>>> [ 2.575497] imx-media: imx6-mipi-csi2:2 -> ipu1_csi1:0
>>> [ 2.580716] imx-media: ipu1_csi0:1 -> ipu1_ic_prp:0
>>> [ 2.585623] imx-media: ipu1_csi0:1 -> ipu1_vdic:0
>>> [ 2.590411] imx-media: ipu1_csi0_mux:2 -> ipu1_csi0:0
>>> [ 2.595499] imx-media: ipu2_ic_prp:1 -> ipu2_ic_prpenc:0
>>> [ 2.600901] imx-media: ipu2_ic_prp:2 -> ipu2_ic_prpvf:0
>>> [ 2.606159] imx-media: ipu1_ic_prp:1 -> ipu1_ic_prpenc:0
>>> [ 2.611548] imx-media: ipu1_ic_prp:2 -> ipu1_ic_prpvf:0
>>> [ 2.616803] imx-media: ipu2_vdic:2 -> ipu2_ic_prp:0
>>> [ 2.621754] imx-media: ipu1_vdic:2 -> ipu1_ic_prp:0
>>> [ 2.637015] imx_thermal tempmon: Industrial CPU temperature grade -
>>> max:105C critical:100C passive:95C
>>> [ 2.650475] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock
>>> to 1970-01-01 00:00:00 UTC (0)
>>> [ 2.659880] cfg80211: Loading compiled-in X.509 certificates for
>>> regulatory database
>>> [ 2.674031] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
>>> [ 2.682013] platform regulatory.0: Direct firmware load for
>>> regulatory.db failed with error -2
>>> [ 2.690851] cfg80211: failed to load regulatory.db
>>> [ 2.695737] ALSA device list:
>>> [ 2.698762] No soundcards found.
>>> [ 3.592224] EXT4-fs (mmcblk0p2): recovery complete
>>> [ 3.602020] EXT4-fs (mmcblk0p2): mounted filesystem with ordered
>>> data mode. Opts: (null)
>>> [ 3.610371] VFS: Mounted root (ext4 filesystem) on device 179:2.
>>> [ 3.618708] devtmpfs: mounted
>>> [ 3.624665] Freeing unused kernel memory: 1024K
>>> [ 3.743951] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
>>> Starting logging: OK
>>> Initializing random number generator... [ 3.897748] random: dd:
>>> uninitialized urandom read (512 bytes read)
>>> done.
>>> Starting network: OK
>>>
>>> Welcome to Engicam i.CoreM6 Quad/Dual/DualLite/Solo
>>> buildroot login: root
>>> # media-ctl -l "'ov5640 2-003c':0 -> 'imx6-mipi-csi2':0[1]"
>>> # media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]"
>>> # media-ctl -l "'ipu1_csi1':1 -> 'ipu1_ic_prp':0[1]"
>>> # media-ctl -l "'ipu1_ic_prp':1 -> 'ipu1_ic_prpenc':0[1]"
>>> # media-ctl -l "'ipu1_ic_prpenc':1 -> 'ipu1_ic_prpenc capture':0[1]"
>>> # media-ctl -V "'ov5640 2-003c':0 [fmt:UYVY2X8/640x480 field:none]"
>>> # media-ctl -V "'imx6-mipi-csi2':2 [fmt:UYVY2X8/640x480 field:none]"
>>> # media-ctl -V "'ipu1_csi1':1 [fmt:AYUV32/640x480 field:none]"
>>> # media-ctl -V "'ipu1_ic_prp':1 [fmt:AYUV32/640x480 field:none]"
>>> # media-ctl -V "'ipu1_ic_prpenc':1 [fmt:AYUV32/640x480 field:none]"
>>> # med# media-ctl -p
>>> Media controller API version 4.17.0
>>>
>>> Media device information
>>> ------------------------
>>> driver imx-media
>>> model imx-media
>>> serial
>>> bus info
>>> hw revision 0x0
>>> driver version 4.17.0
>>>
>>> Device topology
>>> - entity 1: ov5640 2-003c (1 pad, 1 link)
>>> type V4L2 subdev subtype Sensor flags 0
>>> device node name /dev/v4l-subdev0
>>> pad0: Source
>>> [fmt:UYVY8_2X8/640x480 field:none]
>>> -> "imx6-mipi-csi2":0 [ENABLED]
>>>
>>> - entity 3: ipu1_vdic (3 pads, 3 links)
>>> type V4L2 subdev subtype Unknown flags 0
>>> device node name /dev/v4l-subdev1
>>> pad0: Sink
>>> [fmt:AYUV8_1X32/640x480 field:none]
>>> <- "ipu1_csi0":1 []
>>> <- "ipu1_csi1":1 []
>>> pad1: Sink
>>> [fmt:UYVY8_2X8/640x480 field:none]
>>> pad2: Source
>>> [fmt:AYUV8_1X32/640x480 field:none]
>>> -> "ipu1_ic_prp":0 []
>>>
>>> - entity 7: ipu2_vdic (3 pads, 3 links)
>>> type V4L2 subdev subtype Unknown flags 0
>>> device node name /dev/v4l-subdev2
>>> pad0: Sink
>>> [fmt:AYUV8_1X32/640x480 field:none]
>>> <- "ipu2_csi0":1 []
>>> <- "ipu2_csi1":1 []
>>> pad1: Sink
>>> [fmt:UYVY8_2X8/640x480 field:none]
>>> pad2: Source
>>> [fmt:AYUV8_1X32/640x480 field:none]
>>> -> "ipu2_ic_prp":0 []
>>>
>>> - entity 11: ipu1_ic_prp (3 pads, 5 links)
>>> type V4L2 subdev subtype Unknown flags 0
>>> device node name /dev/v4l-subdev3
>>> pad0: Sink
>>> [fmt:AYUV8_1X32/640x480 field:none]
>>> <- "ipu1_vdic":2 []
>>> <- "ipu1_csi0":1 []
>>> <- "ipu1_csi1":1 [ENABLED]
>>> pad1: Source
>>> [fmt:AYUV8_1X32/640x480 field:none]
>>> -> "ipu1_ic_prpenc":0 [ENABLED]
>>> pad2: Source
>>> [fmt:AYUV8_1X32/640x480 field:none]
>>> -> "ipu1_ic_prpvf":0 []
>>>
>>> - entity 15: ipu1_ic_prpenc (2 pads, 2 links)
>>> type V4L2 subdev subtype Unknown flags 0
>>> device node name /dev/v4l-subdev4
>>> pad0: Sink
>>> [fmt:AYUV8_1X32/640x480 field:none]
>>> <- "ipu1_ic_prp":1 [ENABLED]
>>> pad1: Source
>>> [fmt:AYUV8_1X32/640x480 field:none]
>>> -> "ipu1_ic_prpenc capture":0 [ENABLED]
>>>
>>> - entity 18: ipu1_ic_prpenc capture (1 pad, 1 link)
>>> type Node subtype V4L flags 0
>>> device node name /dev/video0
>>> pad0: Sink
>>> <- "ipu1_ic_prpenc":1 [ENABLED]
>>>
>>> - entity 24: ipu1_ic_prpvf (2 pads, 2 links)
>>> type V4L2 subdev subtype Unknown flags 0
>>> device node name /dev/v4l-subdev5
>>> pad0: Sink
>>> [fmt:AYUV8_1X32/640x480 field:none]
>>> <- "ipu1_ic_prp":2 []
>>> pad1: Source
>>> [fmt:AYUV8_1X32/640x480 field:none]
>>> -> "ipu1_ic_prpvf capture":0 []
>>>
>>> - entity 27: ipu1_ic_prpvf capture (1 pad, 1 link)
>>> type Node subtype V4L flags 0
>>> device node name /dev/video1
>>> pad0: Sink
>>> <- "ipu1_ic_prpvf":1 []
>>>
>>> - entity 33: ipu2_ic_prp (3 pads, 5 links)
>>> type V4L2 subdev subtype Unknown flags 0
>>> device node name /dev/v4l-subdev6
>>> pad0: Sink
>>> [fmt:AYUV8_1X32/640x480 field:none]
>>> <- "ipu2_vdic":2 []
>>> <- "ipu2_csi0":1 []
>>> <- "ipu2_csi1":1 []
>>> pad1: Source
>>> [fmt:AYUV8_1X32/640x480 field:none]
>>> -> "ipu2_ic_prpenc":0 []
>>> pad2: Source
>>> [fmt:AYUV8_1X32/640x480 field:none]
>>> -> "ipu2_ic_prpvf":0 []
>>>
>>> - entity 37: ipu2_ic_prpenc (2 pads, 2 links)
>>> type V4L2 subdev subtype Unknown flags 0
>>> device node name /dev/v4l-subdev7
>>> pad0: Sink
>>> [fmt:AYUV8_1X32/640x480 field:none]
>>> <- "ipu2_ic_prp":1 []
>>> pad1: Source
>>> [fmt:AYUV8_1X32/640x480 field:none]
>>> -> "ipu2_ic_prpenc capture":0 []
>>>
>>> - entity 40: ipu2_ic_prpenc capture (1 pad, 1 link)
>>> type Node subtype V4L flags 0
>>> device node name /dev/video2
>>> pad0: Sink
>>> <- "ipu2_ic_prpenc":1 []
>>>
>>> - entity 46: ipu2_ic_prpvf (2 pads, 2 links)
>>> type V4L2 subdev subtype Unknown flags 0
>>> device node name /dev/v4l-subdev8
>>> pad0: Sink
>>> [fmt:AYUV8_1X32/640x480 field:none]
>>> <- "ipu2_ic_prp":2 []
>>> pad1: Source
>>> [fmt:AYUV8_1X32/640x480 field:none]
>>> -> "ipu2_ic_prpvf capture":0 []
>>>
>>> - entity 49: ipu2_ic_prpvf capture (1 pad, 1 link)
>>> type Node subtype V4L flags 0
>>> device node name /dev/video3
>>> pad0: Sink
>>> <- "ipu2_ic_prpvf":1 []
>>>
>>> - entity 55: ipu1_csi0 (3 pads, 4 links)
>>> type V4L2 subdev subtype Unknown flags 0
>>> device node name /dev/v4l-subdev9
>>> pad0: Sink
>>> [fmt:UYVY8_2X8/640x480 field:none
>>> crop.bounds:(0,0)/640x480
>>> crop:(0,0)/640x480
>>> compose.bounds:(0,0)/640x480
>>> compose:(0,0)/640x480]
>>> <- "ipu1_csi0_mux":2 []
>>> pad1: Source
>>> [fmt:AYUV8_1X32/640x480 field:none]
>>> -> "ipu1_ic_prp":0 []
>>> -> "ipu1_vdic":0 []
>>> pad2: Source
>>> [fmt:AYUV8_1X32/640x480 field:none]
>>> -> "ipu1_csi0 capture":0 []
>>>
>>> - entity 59: ipu1_csi0 capture (1 pad, 1 link)
>>> type Node subtype V4L flags 0
>>> device node name /dev/video4
>>> pad0: Sink
>>> <- "ipu1_csi0":2 []
>>>
>>> - entity 65: ipu1_csi1 (3 pads, 4 links)
>>> type V4L2 subdev subtype Unknown flags 0
>>> device node name /dev/v4l-subdev10
>>> pad0: Sink
>>> [fmt:UYVY8_2X8/640x480 field:none
>>> crop.bounds:(0,0)/640x480
>>> crop:(0,0)/640x480
>>> compose.bounds:(0,0)/640x480
>>> compose:(0,0)/640x480]
>>> <- "imx6-mipi-csi2":2 [ENABLED]
>>> pad1: Source
>>> [fmt:AYUV8_1X32/640x480 field:none]
>>> -> "ipu1_ic_prp":0 [ENABLED]
>>> -> "ipu1_vdic":0 []
>>> pad2: Source
>>> [fmt:AYUV8_1X32/640x480 field:none]
>>> -> "ipu1_csi1 capture":0 []
>>>
>>> - entity 69: ipu1_csi1 capture (1 pad, 1 link)
>>> type Node subtype V4L flags 0
>>> device node name /dev/video5
>>> pad0: Sink
>>> <- "ipu1_csi1":2 []
>>>
>>> - entity 75: ipu2_csi0 (3 pads, 4 links)
>>> type V4L2 subdev subtype Unknown flags 0
>>> device node name /dev/v4l-subdev11
>>> pad0: Sink
>>> [fmt:UYVY8_2X8/640x480 field:none
>>> crop.bounds:(0,0)/640x480
>>> crop:(0,0)/640x480
>>> compose.bounds:(0,0)/640x480
>>> compose:(0,0)/640x480]
>>> <- "imx6-mipi-csi2":3 []
>>> pad1: Source
>>> [fmt:AYUV8_1X32/640x480 field:none]
>>> -> "ipu2_ic_prp":0 []
>>> -> "ipu2_vdic":0 []
>>> pad2: Source
>>> [fmt:AYUV8_1X32/640x480 field:none]
>>> -> "ipu2_csi0 capture":0 []
>>>
>>> - entity 79: ipu2_csi0 capture (1 pad, 1 link)
>>> type Node subtype V4L flags 0
>>> device node name /dev/video6
>>> pad0: Sink
>>> <- "ipu2_csi0":2 []
>>>
>>> - entity 85: ipu2_csi1 (3 pads, 4 links)
>>> type V4L2 subdev subtype Unknown flags 0
>>> device node name /dev/v4l-subdev12
>>> pad0: Sink
>>> [fmt:UYVY8_2X8/640x480 field:none
>>> crop.bounds:(0,0)/640x480
>>> crop:(0,0)/640x480
>>> compose.bounds:(0,0)/640x480
>>> compose:(0,0)/640x480]
>>> <- "ipu2_csi1_mux":2 []
>>> pad1: Source
>>> [fmt:AYUV8_1X32/640x480 field:none]
>>> -> "ipu2_ic_prp":0 []
>>> -> "ipu2_vdic":0 []
>>> pad2: Source
>>> [fmt:AYUV8_1X32/640x480 field:none]
>>> -> "ipu2_csi1 capture":0 []
>>>
>>> - entity 89: ipu2_csi1 capture (1 pad, 1 link)
>>> type Node subtype V4L flags 0
>>> device node name /dev/video7
>>> pad0: Sink
>>> <- "ipu2_csi1":2 []
>>>
>>> - entity 95: imx6-mipi-csi2 (5 pads, 5 links)
>>> type V4L2 subdev subtype Unknown flags 0
>>> device node name /dev/v4l-subdev13
>>> pad0: Sink
>>> [fmt:UYVY8_2X8/640x480 field:none]
>>> <- "ov5640 2-003c":0 [ENABLED]
>>> pad1: Source
>>> [fmt:UYVY8_2X8/640x480 field:none]
>>> -> "ipu1_csi0_mux":0 []
>>> pad2: Source
>>> [fmt:UYVY8_2X8/640x480 field:none]
>>> -> "ipu1_csi1":0 [ENABLED]
>>> pad3: Source
>>> [fmt:UYVY8_2X8/640x480 field:none]
>>> -> "ipu2_csi0":0 []
>>> pad4: Source
>>> [fmt:UYVY8_2X8/640x480 field:none]
>>> -> "ipu2_csi1_mux":0 []
>>>
>>> - entity 101: ipu1_csi0_mux (3 pads, 2 links)
>>> type V4L2 subdev subtype Unknown flags 0
>>> device node name /dev/v4l-subdev14
>>> pad0: Sink
>>> [fmt:unknown/0x0]
>>> <- "imx6-mipi-csi2":1 []
>>> pad1: Sink
>>> [fmt:unknown/0x0]
>>> pad2: Source
>>> [fmt:unknown/0x0]
>>> -> "ipu1_csi0":0 []
>>>
>>> - entity 105: ipu2_csi1_mux (3 pads, 2 links)
>>> type V4L2 subdev subtype Unknown flags 0
>>> device node name /dev/v4l-subdev15
>>> pad0: Sink
>>> [fmt:unknown/0x0]
>>> <- "imx6-mipi-csi2":4 []
>>> pad1: Sink
>>> [fmt:unknown/0x0]
>>> pad2: Source
>>> [fmt:unknown/0x0]
>>> -> "ipu2_csi1":0 []
>>>
>>> # GST_DEBUG="v4l2*:5" gst-launch-1.0 -v v4l2src device=/dev/video1 ! \
>>>> autovideosink
>>> 0:00:01.086281666 185 0x1dce880 DEBUG v4l2
>>> gstv4l2object.c:1487:gst_v4l2_object_v4l1
>>> 0:00:01.087369666 185 0x1dce880 DEBUG v4l2
>>> gstv4l2object.c:1487:gst_v4l2_object_v4l5
>>> 0:00:01.088496000 185 0x1dce880 DEBUG v4l2
>>> gstv4l2object.c:1487:gst_v4l2_object_v4l.
>>> 0:00:01.089540333 185 0x1dce880 DEBUG v4l2
>>> gstv4l2object.c:1487:gst_v4l2_object_v4lR
>>> 0:00:01.090494666 185 0x1dce880 DEBUG v4l2
>>> gstv4l2object.c:1487:gst_v4l2_object_v4lH
>>> 0:00:01.091657666 185 0x1dce880 DEBUG v4l2
>>> gstv4l2object.c:1487:gst_v4l2_object_v4l4
>>> 0:00:01.092745000 185 0x1dce880 DEBUG v4l2
>>> gstv4l2object.c:1487:gst_v4l2_object_v4l
>>> 0:00:01.093703333 185 0x1dce880 DEBUG v4l2
>>> gstv4l2object.c:1487:gst_v4l2_object_v4l
>>> 0:00:01.094854000 185 0x1dce880 DEBUG v4l2
>>> gstv4l2object.c:1487:gst_v4l2_object_v4l
>>> 0:00:01.095815000 185 0x1dce880 DEBUG v4l2
>>> gstv4l2object.c:1487:gst_v4l2_object_v4l
>>> 0:00:01.096818666 185 0x1dce880 DEBUG v4l2
>>> gstv4l2object.c:1487:gst_v4l2_object_v4lB
>>> 0:00:01.097819000 185 0x1dce880 DEBUG v4l2
>>> gstv4l2object.c:1487:gst_v4l2_object_v4l8
>>> 0:00:01.098771000 185 0x1dce880 DEBUG v4l2
>>> gstv4l2object.c:1487:gst_v4l2_object_v4l
>>> 0:00:01.099798666 185 0x1dce880 DEBUG v4l2
>>> gstv4l2object.c:1487:gst_v4l2_object_v4l1
>>> 0:00:01.100776666 185 0x1dce880 DEBUG v4l2
>>> gstv4l2object.c:1487:gst_v4l2_object_v4lV
>>> 0:00:01.101755333 185 0x1dce880 DEBUG v4l2
>>> gstv4l2object.c:1487:gst_v4l2_object_v4lY
>>> 0:00:01.102771666 185 0x1dce880 DEBUG v4l2
>>> gstv4l2object.c:1487:gst_v4l2_object_v4lP
>>> 0:00:01.103712000 185 0x1dce880 DEBUG v4l2
>>> gstv4l2object.c:1487:gst_v4l2_object_v4l4
>>> 0:00:01.104720000 185 0x1dce880 DEBUG v4l2
>>> gstv4l2object.c:1487:gst_v4l2_object_v4lO
>>> 0:00:01.105697000 185 0x1dce880 DEBUG v4l2
>>> gstv4l2object.c:1487:gst_v4l2_object_v4lP
>>> 0:00:01.106629666 185 0x1dce880 DEBUG v4l2
>>> gstv4l2object.c:1487:gst_v4l2_object_v4l4
>>> 0:00:01.107681666 185 0x1dce880 DEBUG v4l2
>>> gstv4l2object.c:1487:gst_v4l2_object_v4l4
>>> 0:00:01.108660666 185 0x1dce880 DEBUG v4l2
>>> gstv4l2object.c:1487:gst_v4l2_object_v4l2
>>> 0:00:01.442437333 185 0x1dce880 DEBUG v4l2
>>> gstv4l2object.c:1487:gst_v4l2_object_v4l0
>>> 0:00:01.444673333 185 0x1dce880 DEBUG v4l2
>>> gstv4l2object.c:1487:gst_v4l2_object_v4l2
>>> 0:00:01.446842000 185 0x1dce880 DEBUG v4l2
>>> gstv4l2object.c:1487:gst_v4l2_object_v4l2
>>> 0:00:01.449084000 185 0x1dce880 DEBUG v4l2
>>> gstv4l2object.c:1487:gst_v4l2_object_v4l4
>>> Setting pipeline to PAUSED ...
>>> 0:00:01.680823000 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:524:gst_v4l2_open:<v4l2src01
>>> 0:00:01.681953333 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:69:gst_v4l2_get_capabilities
>>> 0:00:01.683098666 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:140:gst_v4l2_fill_lists:<v4s
>>> 0:00:01.684056666 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:143:gst_v4l2_fill_lists:<v4s
>>> 0:00:01.685201000 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:215:gst_v4l2_fill_lists:<v4s
>>> 0:00:01.686159333 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
>>> 0:00:01.687207666 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4C
>>> 0:00:01.688183666 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
>>> 0:00:01.689155333 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4M
>>> 0:00:01.690142000 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
>>> 0:00:01.691114000 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4P
>>> 0:00:01.692080000 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
>>> 0:00:01.693073000 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4R
>>> 0:00:01.694043000 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
>>> 0:00:01.695760000 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4L
>>> 0:00:01.696736333 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
>>> 0:00:01.697708000 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4G
>>> 0:00:01.698699000 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
>>> 0:00:01.699667000 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4H
>>> 0:00:01.700633000 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
>>> 0:00:01.701623666 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4I
>>> 0:00:01.702591000 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
>>> 0:00:01.703554333 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4K
>>> 0:00:01.704604000 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
>>> 0:00:01.705576666 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4M
>>> 0:00:01.706567000 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
>>> 0:00:02.040204667 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4B
>>> 0:00:02.042194667 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
>>> 0:00:02.044190000 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4G
>>> 0:00:02.046338333 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
>>> 0:00:02.048327667 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4H
>>> 0:00:02.050296000 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
>>> 0:00:02.052385000 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4K
>>> 0:00:02.054376000 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
>>> 0:00:02.056461333 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4L
>>> 0:00:02.058434000 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
>>> 0:00:02.060423667 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:257:gst_v4l2_fill_lists:<v4c
>>> 0:00:02.062382667 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:263:gst_v4l2_fill_lists:<v4s
>>> 0:00:02.064291333 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:283:gst_v4l2_fill_lists:<v40
>>> 0:00:02.066224667 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:292:gst_v4l2_fill_lists:<v4.
>>> 0:00:02.067190333 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:283:gst_v4l2_fill_lists:<v40
>>> 0:00:02.068174333 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:300:gst_v4l2_fill_lists:<v40
>>> 0:00:02.069141000 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:283:gst_v4l2_fill_lists:<v40
>>> 0:00:02.070113000 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:305:gst_v4l2_fill_lists:<v4d
>>> 0:00:02.071088333 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:456:gst_v4l2_fill_lists:<v4e
>>> 0:00:02.072040000 185 0x1dce880 INFO v4l2
>>> v4l2_calls.c:592:gst_v4l2_open:<v4l2src0y
>>> 0:00:02.073017333 185 0x1dce880 DEBUG v4l2
>>> gstv4l2object.c:804:gst_v4l2_set_default)
>>> 0:00:02.074010667 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:740:gst_v4l2_get_norm:<v4l2m
>>> 0:00:02.075021000 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:754:gst_v4l2_get_norm: Fail1
>>> 0:00:02.076012000 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:1027:gst_v4l2_get_input:<v4t
>>> Pipeline is live and does not need PREROLL ...
>>> 0:00:02.080105333 185 0x1ec39b0 DEBUG v4l2
>>> gstv4l2object.c:1109:gst_v4l2_object_fil.
>>> <v4l2src0> getting src format enumerations
>>> 0:00:02.412981333 185 0x1ec39b0 INFO New clock: GstSystemClock
>>> v4l2 gstv4l2object.c:1146:gst_v4l2_object_fill_format_list:<v4l2src0>
>>> got 7 format(s):
>>> 0:00:02.415407667 185 0x1ec39b0 INFO v4l2
>>> gstv4l2object.c:1152:gst_v4l2_object_filV
>>> 0:00:02.417531667 185 0x1ec39b0 INFO v4l2
>>> gstv4l2object.c:1152:gst_v4l2_object_filY
>>> 0:00:02.419703667 185 0x1ec39b0 INFO v4l2
>>> gstv4l2object.c:1152:gst_v4l2_object_filP
>>> 0:00:02.421860000 185 0x1ec39b0 INFO v4l2
>>> gstv4l2object.c:1152:gst_v4l2_object_fil2
>>> 0:00:02.424022667 185 0x1ec39b0 INFO v4l2
>>> gstv4l2object.c:1152:gst_v4l2_object_fil2
>>> 0:00:02.426295000 185 0x1ec39b0 INFO v4l2
>>> gstv4l2object.c:1152:gst_v4l2_object_fil6
>>> 0:00:02.428481333 185 0x1ec39b0 INFO v4l2
>>> gstv4l2object.c:1152:gst_v4l2_object_fil2
>>> 0:00:02.430728333 185 0x1ec39b0 DEBUG v4l2
>>> gstv4l2object.c:2564:gst_v4l2_object_proV
>>> 0:00:02.432985333 185 0x1ec39b0 DEBUG v4l2
>>> gstv4l2object.c:2691:gst_v4l2_object_pro)
>>> 0:00:02.436117000 185 0x1ec39b0 DEBUG v4l2
>>> gstv4l2object.c:2564:gst_v4l2_object_proY
>>> 0:00:02.437252333 185 0x1ec39b0 DEBUG v4l2
>>> gstv4l2object.c:2691:gst_v4l2_object_pro)
>>> 0:00:02.438579000 185 0x1ec39b0 DEBUG v4l2
>>> gstv4l2object.c:2564:gst_v4l2_object_proP
>>> 0:00:02.439656000 185 0x1ec39b0 DEBUG v4l2
>>> gstv4l2object.c:2691:gst_v4l2_object_pro)
>>> 0:00:02.441016667 185 0x1ec39b0 DEBUG v4l2
>>> gstv4l2object.c:2564:gst_v4l2_object_pro2
>>> 0:00:02.442092333 185 0x1ec39b0 DEBUG v4l2
>>> gstv4l2object.c:2691:gst_v4l2_object_pro)
>>> 0:00:02.443443333 185 0x1ec39b0 DEBUG v4l2
>>> gstv4l2object.c:2564:gst_v4l2_object_pro2
>>> 0:00:02.444626667 185 0x1ec39b0 DEBUG v4l2
>>> gstv4l2object.c:2691:gst_v4l2_object_pro)
>>> 0:00:02.445990667 185 0x1ec39b0 DEBUG v4l2
>>> gstv4l2object.c:2564:gst_v4l2_object_pro6
>>> 0:00:02.447063667 185 0x1ec39b0 DEBUG v4l2
>>> gstv4l2object.c:2691:gst_v4l2_object_pro)
>>> 0:00:02.448410333 185 0x1ec39b0 DEBUG v4l2
>>> gstv4l2object.c:2564:gst_v4l2_object_pro2
>>> 0:00:02.782148333 185 0x1ec39b0 DEBUG v4l2
>>> gstv4l2object.c:2691:gst_v4l2_object_pro)
>>> 0:00:02.785264333 185 0x1ec39b0 INFO v4l2
>>> gstv4l2object.c:3967:gst_v4l2_object_get}
>>> 0:00:02.788800000 185 0x1ec39b0 DEBUG v4l2src
>>> gstv4l2src.c:300:gst_v4l2src_negotiate:<}
>>> 0:00:02.792207000 185 0x1ec39b0 DEBUG v4l2src
>>> gstv4l2src.c:308:gst_v4l2src_negotiate:<]
>>> 0:00:02.795419000 185 0x1ec39b0 DEBUG v4l2src
>>> gstv4l2src.c:316:gst_v4l2src_negotiate:<}
>>> 0:00:03.132052667 185 0x1ec39b0 DEBUG v4l2src
>>> gstv4l2src.c:256:gst_v4l2src_fixate:<v4l}
>>> 0:00:03.134399667 185 0x1ec39b0 DEBUG v4l2src
>>> gstv4l2src.c:282:gst_v4l2src_fixate:<v4l}
>>> 0:00:03.136800667 185 0x1ec39b0 DEBUG v4l2src
>>> gstv4l2src.c:367:gst_v4l2src_negotiate:<1
>>> 0:00:03.139067333 185 0x1ec39b0 DEBUG v4l2
>>> gstv4l2object.c:3887:gst_v4l2_object_stog
>>> 0:00:03.141452000 185 0x1ec39b0 DEBUG v4l2
>>> gstv4l2object.c:3176:gst_v4l2_object_seto
>>> 0:00:03.143608667 185 0x1ec39b0 DEBUG v4l2
>>> gstv4l2object.c:3310:gst_v4l2_object_set0
>>> 0:00:03.146025333 185 0x1ec39b0 DEBUG v4l2
>>> gstv4l2object.c:3361:gst_v4l2_object_set1
>>> 0:00:03.148229000 185 0x1ec39b0 DEBUG v4l2
>>> gstv4l2object.c:3370:gst_v4l2_object_set0
>>> 0:00:03.150373667 185 0x1ec39b0 DEBUG v4l2
>>> gstv4l2object.c:3404:gst_v4l2_object_set1
>>> 0:00:03.152589667 185 0x1ec39b0 DEBUG v4l2
>>> gstv4l2object.c:3414:gst_v4l2_object_set0
>>> 0:00:03.155250667 185 0x1ec39b0 DEBUG v4l2
>>> gstv4l2object.c:3455:gst_v4l2_object_set1
>>> 0:00:03.156584667 185 0x1ec39b0 DEBUG v4l2
>>> gstv4l2object.c:3472:gst_v4l2_object_set1
>>> 0:00:03.157659333 185 0x1ec39b0 INFO v4l2
>>> gstv4l2object.c:3504:gst_v4l2_object_set1
>>> 0:00:03.491432000 185 0x1ec39b0 DEBUG v4l2
>>> gstv4l2object.c:2960:gst_v4l2_object_ext0
>>> 0:00:03.493645333 185 0x1ec39b0 DEBUG v4l2
>>> gstv4l2object.c:3071:gst_v4l2_object_sav0
>>> 0:00:03.496027333 185 0x1ec39b0 DEBUG v4l2
>>> gstv4l2object.c:2843:gst_v4l2_object_setm
>>> 0:00:03.498180000 185 0x1ec39b0 INFO v4l2
>>> gstv4l2object.c:2867:gst_v4l2_object_set2
>>> 0:00:03.502772000 185 0x1ec39b0 DEBUG v4l2bufferpool
>>> gstv4l2bufferpool.c:509:gst_v4l2_buffer_;
>>> 0:00:03.505283333 185 0x1ec39b0 INFO v4l2bufferpool
>>> gstv4l2bufferpool.c:557:gst_v4l2_buffer_2
>>> 0:00:03.507120000 185 0x1ec39b0 INFO v4l2bufferpool
>>> gstv4l2bufferpool.c:570:gst_v4l2_buffer_2
>>> /GstPipeline:pipeline0/GstV4l2Src:v4l2src0.GstPad:src: caps =
>>> video/x-raw, format=(string)YUY2, width=(i1
>>> /GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0.GstGhostPad:sink.GstProxyPad:proxypad0:
>>> caps = vi1
>>> /GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0/GstKMSSink:autovideosink0-actual-sink-kms.GstPad:1
>>> 0:00:03/GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0.GstGhostPad:sink:
>>> caps = video/x-raw, form1
>>> .512440000 185 0x1ec39b0 DEBUG v4l2
>>> gstv4l2object.c:3985:gst_v4l2_object_decide_alln
>>> 0:00:03.513556667 185 0x1ec39b0 DEBUG v4l2
>>> gstv4l2object.c:4011:gst_v4l2_object_dec>
>>> 0:00:03.514745667 185 0x1ec39b0 DEBUG v4l2
>>> gstv4l2object.c:4069:gst_v4l2_object_dec>
>>> 0:00:03.515889000 185 0x1ec39b0 DEBUG v4l2
>>> gstv4l2object.c:4134:gst_v4l2_object_deca
>>> 0:00:03.516969667 185 0x1ec39b0 DEBUG v4l2
>>> gstv4l2object.c:4143:gst_v4l2_object_dec;
>>> 0:00:03.851350333 185 0x1ec39b0 DEBUG v4l2bufferpool
>>> gstv4l2bufferpool.c:509:gst_v4l2_buffer_2
>>> ams)NULL, options=(string)< GstBufferPoolOptionVideoMeta >;
>>> 0:00:03.853620333 185 0x1ec39b0 INFO v4l2bufferpool
>>> gstv4l2bufferpool.c:570:gst_v4l2_buffer_2
>>> 0:00:03.855780667 185 0x1ec39b0 DEBUG v4l2
>>> gstv4l2object.c:4150:gst_v4l2_object_dec;
>>> 0:00:03.858430000 185 0x1ec39b0 DEBUG v4l2bufferpool
>>> gstv4l2bufferpool.c:509:gst_v4l2_buffer_;
>>> 0:00:03.861572333 185 0x1ec39b0 DEBUG v4l2bufferpool
>>> gstv4l2bufferpool.c:707:gst_v4l2_buffer_l
>>> 0:00:03.863468333 185 0x1ec39b0 DEBUG v4l2bufferpool
>>> gstv4l2bufferpool.c:737:gst_v4l2_buffer_s
>>> 0:00:03.918861000 185 0x1ec39b0 DEBUG v4l2allocator
>>> gstv4l2allocator.c:706:gst_v4l2_allocatod
>>> 0:00:03.943783333 185 0x1ec39b0 DEBUG v4l2bufferpool
>>> gstv4l2bufferpool.c:1389:gst_v4l2_buffer8
>>> 0:00:03.946129333 185 0x1ec39b0 DEBUG v4l2bufferpool
>>> gstv4l2bufferpool.c:1389:gst_v4l2_buffer8
>>> 0:00:03.948065000 185 0x1ec39b0 DEBUG v4l2bufferpool
>>> gstv4l2bufferpool.c:1389:gst_v4l2_buffer8
>>> 0:00:03.950006000 185 0x1ec39b0 DEBUG v4l2bufferpool
>>> gstv4l2bufferpool.c:952:gst_v4l2_buffer_g
>>> 0:00:03.996241333 185 0x1ec39b0 ERROR v4l2bufferpool
>>> gstv4l2bufferpool.c:641:gst_v4l2_buffer_)
>>> 0:00:03.998199667 185 0x1ec39b0 DEBUG v4l2bufferpool
>>> gstv4l2bufferpool.c:1311:gst_v4l2_buffere
>>> 0:00:04.000463000 185 0x1ec39b0 WARN v4l2bufferpool
>>> gstv4l2bufferpool.c:1064:gst_v4l2_buffer)
>>> 0:00:04.004649333 185 0x1ec39b0 DEBUG v4l2bufferpool
>>> gstv4l2bufferpool.c:1283:gst_v4l2_bufferr
>>> 0:00:04.005853333 185 0x1ec39b0 WARN v4l2src
>>> gstv4l2src.c:866:gst_v4l2src_create:<v4lr
>>> ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Could
>>> not read from resource.
>>> Additional debug info:
>>> gstv4l2bufferpool.c(1064): gst_v4l2_buffer_pool_poll ():
>>> /GstPipeline:pipeline0/GstV4l2Src:v4l2src0:
>>> poll error 1: Resource temporarily unavailable (11)
>>> Execution ended after 0:00:01.606871334
>>> Setting pipeline to PAUSED ...
>>> 0:00:04.022385000 185 0x1dce880 DEBUG v4l2bufferpool
>>> gstv4l2bufferpool.c:931:gst_v4l2_buffer_g
>>> Setting pipeline to READY ...
>>> 0:00:04.024850667 185 0x1dce880 DEBUG v4l2bufferpool
>>> gstv4l2bufferpool.c:879:gst_v4l2_buffer_l
>>> 0:00:04.026764000 185 0x1dce880 DEBUG v4l2allocator
>>> gstv4l2allocator.c:757:gst_v4l2_allocator
>>> 0:00:04.028598333 185 0x1dce880 DEBUG v4l2allocator
>>> gstv4l2allocator.c:765:gst_v4l2_allocatoe
>>> 0:00:04.362785667 185 0x1dce880 WARN v4l2bufferpool
>>> gstv4l2bufferpool.c:918:gst_v4l2_buffer_g
>>> 0:00:04.364712333 185 0x1dce880 DEBUG v4l2bufferpool
>>> gstv4l2bufferpool.c:952:gst_v4l2_buffer_g
>>> 0:00:04.366504333 185 0x1dce880 DEBUG v4l2bufferpool
>>> gstv4l2bufferpool.c:629:gst_v4l2_buffer_g
>>> 0:00:04.368607000 185 0x1dce880 DEBUG v4l2
>>> gstv4l2object.c:3887:gst_v4l2_object_stog
>>> 0:00:04.370713333 185 0x1dce880 DEBUG v4l2
>>> gstv4l2object.c:3895:gst_v4l2_object_stol
>>> 0:00:04.372809333 185 0x1dce880 DEBUG v4l2bufferpool
>>> gstv4l2bufferpool.c:931:gst_v4l2_buffer_g
>>> 0:00:04.374732000 185 0x1dce880 DEBUG v4l2bufferpool
>>> gstv4l2bufferpool.c:879:gst_v4l2_buffer_l
>>> 0:00:04.376541000 185 0x1dce880 DEBUG v4l2bufferpool
>>> gstv4l2bufferpool.c:663:gst_v4l2_buffer_g
>>> 0:00:04.378334000 185 0x1dce880 DEBUG v4l2allocator
>>> gstv4l2allocator.c:757:gst_v4l2_allocator
>>> Setting pipeline to NULL ...
>>> 0:00:04.394764333 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:716:gst_v4l2_close:<v4l2src1
>>> 0:00:04.395897667 185 0x1dce880 DEBUG v4l2
>>> v4l2_calls.c:464:gst_v4l2_empty_lists:<vs
>>> Freeing pipeline ...
>>>
>>> [1] https://linuxtv.org/downloads/v4l-dvb-apis/v4l-drivers/imx.html#sabresd-with-mipi-csi-2-ov5640
>>> [2] https://paste.ubuntu.com/p/CTvFqdbyMW/
>>>
>>> Jagan.
>>>
>>> --
>>> Jagan Teki
>>> Senior Linux Kernel Engineer | Amarula Solutions
>>> U-Boot, Linux | Upstream Maintainer
>>> Hyderabad, India.
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
2018-10-17 0:13 ` Steve Longerbeam
@ 2018-10-17 8:01 ` jacopo mondi
2018-10-19 13:45 ` Adam Ford
0 siblings, 1 reply; 38+ messages in thread
From: jacopo mondi @ 2018-10-17 8:01 UTC (permalink / raw)
To: Steve Longerbeam
Cc: Adam Ford, Jagan Teki, p.zabel, Fabio Estevam, gstreamer-devel,
linux-media, Linux Kernel Mailing List
[-- Attachment #1: Type: text/plain, Size: 44000 bytes --]
Hi Adam, Seve,
On Tue, Oct 16, 2018 at 05:13:24PM -0700, Steve Longerbeam wrote:
> Hi Adam,
>
>
> On 10/16/18 12:46 PM, Adam Ford wrote:
> >On Thu, Sep 20, 2018 at 9:58 AM jacopo mondi <jacopo@jmondi.org> wrote:
> >>Hi imx6 people,
> >>
> >>On Thu, May 31, 2018 at 08:39:20PM +0530, Jagan Teki wrote:
> >>>Hi All,
> >>>
> >>>I'm trying to verify MIPI-CSI2 OV5640 camera on i.MX6 platform with
> >>>Mainline Linux.
> >>Sorry to resurect this, but before diving deep into details, do anyone
> >>of you verified JPEG capture with ov5640 and i.MX6 platforms, and has
> >>maybe a pipeline configuration to share :) ?
> >
> >I have a 4.14 kernel for my i.MX6D/Q using an ov5640 connected in a
> >similar way as the sabresd and I'm getting similar timeouts.
> >when executing
> >
> >media-ctl -l "'ov5640 2-0010':0 -> 'imx6-mipi-csi2':0[1]"
> >media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]"
>
>
> You're routing through imx6-mipi-csi2 pad 2, which is CSI-2 virtual
> channel 1, so make sure the ov5640 is transmitting on that channel,
> see virtual_channel module parameter.
>
>
> >media-ctl -l "'ipu1_csi1':1 -> 'ipu1_ic_prp':0[1]"
> >media-ctl -l "'ipu1_ic_prp':1 -> 'ipu1_ic_prpenc':0[1]"
> >media-ctl -l "'ipu1_ic_prpenc':1 -> 'ipu1_ic_prpenc capture':0[1]"
> >
> >
> >media-ctl -V "'ov5640 2-0010':0 [fmt:UYVY2X8/640x480 field:none]"
> >media-ctl -V "'imx6-mipi-csi2':2 [fmt:UYVY2X8/640x480 field:none]"
> >media-ctl -V "'ipu1_csi1':1 [fmt:AYUV32/640x480 field:none]"
> >media-ctl -V "'ipu1_ic_prp':1 [fmt:AYUV32/640x480 field:none]"
> >media-ctl -V "'ipu1_ic_prpenc':1 [fmt:AYUV32/640x480 field:none]"
> >
> >
> > gst-launch-1.0 -v v4l2src num-buffers=1 device=/dev/video0 ! jpegenc
> >! filesink location=test.jpg
Thanks, am I wrong or jpegenc is a software JPEG encoder?
I was interested in options for capturing the JPEG frames as produced
by the sensor. I'm not even sure it is possible at all.
> >
> >[ 72.799015] ipu1_ic_prpenc: EOF timeout
> >[ 73.838985] ipu1_ic_prpenc: wait last EOF timeout
> >
> >When I try to jump directly to 4.19-RC8, I get errors regarding memory
> >allocation, so I think there might be something else there I am
> >missing.
> >
Please share the errors. I am using v4.19-rc7 without issues.
> >Has anyone tried this camera module on a 4.14 kernel? I noticed there
> >are a bunch of driver updates, and I was hoping there might be some
> >patches that could be be backported to the 4.14.y stable branch.
>
> I would suggest backporting all the ov5640 commits. You can also
> backport the imx-media commits, but that shouldn't be the cause
> of the timeouts you are seeing.
>
Yes, try to backport the recent ov5640 developments on your kernel
version. There are a lot of fixes there, and I don't think there is
any dependency on new developments on the v4l2 framework you don't
have in v4.14 (I might be wrong though).
In case something breaks when cherry-picking patches or when building,
please share and someone might help (I have recently backported those
changes to a v3.14 kernel, so I might help too).
Thanks
j
>
> Steve
>
>
>
> >
> >thanks for any suggestions to try.
> >
> >adam
> >
> >>Thanks
> >> j
> >>
> >>>I've followed these[1] instructions to configure MC links and pads
> >>>based on the probing details from dmesg and trying to capture
> >>>ipu1_ic_prpenc capture (/dev/video1) but it's not working.
> >>>
> >>>Can anyone help me to verify whether I configured all the details
> >>>properly if not please suggest.
> >>>
> >>>I'm pasting full log here, so-that anyone can comment in line and dt
> >>>changes are at [2]
> >>>
> >>>Log:
> >>>-----
> >>>
> >>>[ 1.211866] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0
> >>>[ 1.220211] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 0
> >>>[ 1.230344] imx-ipuv3 2400000.ipu: IPUv3H probed
> >>>[ 1.237170] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> >>>[ 1.243920] [drm] No driver support for vblank timestamp query.
> >>>[ 1.250831] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops
> >>>ipu_crtc_ops)
> >>>[ 1.258503] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops
> >>>ipu_crtc_ops)
> >>>[ 1.266293] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops
> >>>ipu_crtc_ops)
> >>>[ 1.274027] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops
> >>>ipu_crtc_ops)
> >>>[ 1.282304] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller
> >>>v1.30a with HDCP (DWC HDMI 3D TX PHY)
> >>>[ 1.295722] imx-drm display-subsystem: bound 120000.hdmi (ops
> >>>dw_hdmi_imx_ops)
> >>>[ 1.373615] Console: switching to colour frame buffer device 128x48
> >>>[ 1.396495] imx-drm display-subsystem: fb0: frame buffer device
> >>>[ 1.404620] [drm] Initialized imx-drm 1.0.0 20120507 for
> >>>display-subsystem on minor 1
> >>>[ 1.412763] imx-ipuv3 2800000.ipu: IPUv3H probed
> >>>[ 1.439673] brd: module loaded
> >>>[ 1.469099] loop: module loaded
> >>>[ 1.480324] nand: No NAND device found
> >>>[ 1.487768] libphy: Fixed MDIO Bus: probed
> >>>[ 1.493034] CAN device driver interface
> >>>[ 1.499057] fec 2188000.ethernet: 2188000.ethernet supply phy not
> >>>found, using dummy regulator
> >>>[ 1.511633] pps pps0: new PPS source ptp0
> >>>[ 1.516928] fec 2188000.ethernet (unnamed net_device)
> >>>(uninitialized): Invalid MAC address: 00:00:00:00:00:00
> >>>[ 1.527177] fec 2188000.ethernet (unnamed net_device)
> >>>(uninitialized): Using random MAC address: f2:5a:6d:a6:90:74
> >>>[ 1.543567] libphy: fec_enet_mii_bus: probed
> >>>[ 1.549138] fec 2188000.ethernet eth0: registered PHC device 0
> >>>[ 1.556499] usbcore: registered new interface driver asix
> >>>[ 1.562066] usbcore: registered new interface driver ax88179_178a
> >>>[ 1.568259] usbcore: registered new interface driver cdc_ether
> >>>[ 1.574276] usbcore: registered new interface driver net1080
> >>>[ 1.580097] usbcore: registered new interface driver cdc_subset
> >>>[ 1.586144] usbcore: registered new interface driver zaurus
> >>>[ 1.591910] usbcore: registered new interface driver cdc_ncm
> >>>[ 1.597589] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> >>>[ 1.604209] ehci-pci: EHCI PCI platform driver
> >>>[ 1.608760] ehci-mxc: Freescale On-Chip EHCI Host driver
> >>>[ 1.614851] usbcore: registered new interface driver usb-storage
> >>>[ 1.629947] ci_hdrc ci_hdrc.0: EHCI Host Controller
> >>>[ 1.635066] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
> >>>[ 1.669473] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
> >>>[ 1.677809] hub 1-0:1.0: USB hub found
> >>>[ 1.681902] hub 1-0:1.0: 1 port detected
> >>>[ 1.692839] ci_hdrc ci_hdrc.1: EHCI Host Controller
> >>>[ 1.697791] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2
> >>>[ 1.729537] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
> >>>[ 1.736740] hub 2-0:1.0: USB hub found
> >>>[ 1.740655] hub 2-0:1.0: 1 port detected
> >>>[ 1.753468] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered
> >>>20cc000.snvs:snvs-rtc-lp as rtc0
> >>>[ 1.762976] i2c /dev entries driver
> >>>[ 1.811339] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
> >>>[ 1.817865] Bluetooth: HCI UART driver ver 2.3
> >>>[ 1.822460] Bluetooth: HCI UART protocol H4 registered
> >>>[ 1.828297] Bluetooth: HCI UART protocol LL registered
> >>>[ 1.834774] sdhci: Secure Digital Host Controller Interface driver
> >>>[ 1.841059] sdhci: Copyright(c) Pierre Ossman
> >>>[ 1.845437] sdhci-pltfm: SDHCI platform and OF driver helper
> >>>[ 1.852834] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO
> >>>[ 1.893497] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc]
> >>>using ADMA
> >>>[ 1.937500] mmc1: SDHCI controller on 2198000.usdhc [2198000.usdhc]
> >>>using ADMA
> >>>[ 1.945049] mmc0: host does not support reading read-only switch,
> >>>assuming write-enable
> >>>[ 1.959799] mmc0: new high speed SDHC card at address 1234
> >>>[ 1.968363] mmcblk0: mmc0:1234 SA04G 3.71 GiB
> >>>[ 1.977984] caam 2100000.caam: Entropy delay = 3200
> >>>[ 2.043796] caam 2100000.caam: Instantiated RNG4 SH0
> >>>[ 2.104558] caam 2100000.caam: Instantiated RNG4 SH1
> >>>[ 2.109596] caam 2100000.caam: device ID = 0x0a16010000000000 (Era 4)
> >>>[ 2.116060] caam 2100000.caam: job rings = 2, qi = 0, dpaa2 = no
> >>>[ 2.139266] caam algorithms registered in /proc/crypto
> >>>[ 2.139341] mmcblk0: p1 p2
> >>>[ 2.150910] caam_jr 2101000.jr0: registering rng-caam
> >>>[ 2.157327] usbcore: registered new interface driver usbhid
> >>>[ 2.163103] usbhid: USB HID core driver
> >>>[ 2.171149] imx-media: subdev ov5640 2-003c bound
> >>>[ 2.176631] imx-media: subdev ipu1_vdic bound
> >>>[ 2.181640] imx-media: subdev ipu2_vdic bound
> >>>[ 2.183831] mmc1: new high speed MMC card at address 0001
> >>>[ 2.186357] imx-media: subdev ipu1_ic_prp bound
> >>>[ 2.193649] mmcblk1: mmc1:0001 M62704 3.53 GiB
> >>>[ 2.197342] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video0
> >>>[ 2.202620] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB
> >>>[ 2.208083] imx-media: subdev ipu1_ic_prpenc bound
> >>>[ 2.215764] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB
> >>>[ 2.219512] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video1
> >>>[ 2.231868] imx-media: subdev ipu1_ic_prpvf bound
> >>>[ 2.232186] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB,
> >>>chardev (244:0)
> >>>[ 2.236748] imx-media: subdev ipu2_ic_prp bound
> >>>[ 2.245958] mmcblk1: p1 p2
> >>>[ 2.251569] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video2
> >>>[ 2.258696] imx-media: subdev ipu2_ic_prpenc bound
> >>>[ 2.264108] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video3
> >>>[ 2.271119] imx-media: subdev ipu2_ic_prpvf bound
> >>>[ 2.277042] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video4
> >>>[ 2.283312] imx-media: subdev ipu1_csi0 bound
> >>>[ 2.288312] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video5
> >>>[ 2.294583] imx-media: subdev ipu1_csi1 bound
> >>>[ 2.299694] ipu2_csi0: Registered ipu2_csi0 capture as /dev/video6
> >>>[ 2.305902] imx-media: subdev ipu2_csi0 bound
> >>>[ 2.310953] ipu2_csi1: Registered ipu2_csi1 capture as /dev/video7
> >>>[ 2.317162] imx-media: subdev ipu2_csi1 bound
> >>>[ 2.322293] imx-media: subdev imx6-mipi-csi2 bound
> >>>[ 2.336025] sgtl5000 2-000a: Error reading chip id -6
> >>>[ 2.346932] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW
> >>>[ 2.360345] NET: Registered protocol family 10
> >>>[ 2.367761] Segment Routing with IPv6
> >>>[ 2.371704] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
> >>>[ 2.379180] NET: Registered protocol family 17
> >>>[ 2.383872] can: controller area network core (rev 20170425 abi 9)
> >>>[ 2.390281] NET: Registered protocol family 29
> >>>[ 2.394756] can: raw protocol (rev 20170425)
> >>>[ 2.399126] can: broadcast manager protocol (rev 20170425 t)
> >>>[ 2.404869] can: netlink gateway (rev 20170425) max_hops=1
> >>>[ 2.410989] Key type dns_resolver registered
> >>>[ 2.420041] Registering SWP/SWPB emulation handler
> >>>[ 2.426337] Loading compiled-in X.509 certificates
> >>>[ 2.505422] imx-media: subdev ipu1_csi0_mux bound
> >>>[ 2.511142] imx-media: subdev ipu2_csi1_mux bound
> >>>[ 2.515930] imx-media: imx6-mipi-csi2:4 -> ipu2_csi1_mux:0
> >>>[ 2.518384] random: fast init done
> >>>[ 2.521600] imx-media: imx6-mipi-csi2:1 -> ipu1_csi0_mux:0
> >>>[ 2.530561] imx-media: ov5640 2-003c:0 -> imx6-mipi-csi2:0
> >>>[ 2.536094] imx-media: ipu2_csi1:1 -> ipu2_ic_prp:0
> >>>[ 2.541052] imx-media: ipu2_csi1:1 -> ipu2_vdic:0
> >>>[ 2.545801] imx-media: ipu2_csi1_mux:2 -> ipu2_csi1:0
> >>>[ 2.550932] imx-media: ipu2_csi0:1 -> ipu2_ic_prp:0
> >>>[ 2.555837] imx-media: ipu2_csi0:1 -> ipu2_vdic:0
> >>>[ 2.560629] imx-media: imx6-mipi-csi2:3 -> ipu2_csi0:0
> >>>[ 2.565800] imx-media: ipu1_csi1:1 -> ipu1_ic_prp:0
> >>>[ 2.570750] imx-media: ipu1_csi1:1 -> ipu1_vdic:0
> >>>[ 2.575497] imx-media: imx6-mipi-csi2:2 -> ipu1_csi1:0
> >>>[ 2.580716] imx-media: ipu1_csi0:1 -> ipu1_ic_prp:0
> >>>[ 2.585623] imx-media: ipu1_csi0:1 -> ipu1_vdic:0
> >>>[ 2.590411] imx-media: ipu1_csi0_mux:2 -> ipu1_csi0:0
> >>>[ 2.595499] imx-media: ipu2_ic_prp:1 -> ipu2_ic_prpenc:0
> >>>[ 2.600901] imx-media: ipu2_ic_prp:2 -> ipu2_ic_prpvf:0
> >>>[ 2.606159] imx-media: ipu1_ic_prp:1 -> ipu1_ic_prpenc:0
> >>>[ 2.611548] imx-media: ipu1_ic_prp:2 -> ipu1_ic_prpvf:0
> >>>[ 2.616803] imx-media: ipu2_vdic:2 -> ipu2_ic_prp:0
> >>>[ 2.621754] imx-media: ipu1_vdic:2 -> ipu1_ic_prp:0
> >>>[ 2.637015] imx_thermal tempmon: Industrial CPU temperature grade -
> >>>max:105C critical:100C passive:95C
> >>>[ 2.650475] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock
> >>>to 1970-01-01 00:00:00 UTC (0)
> >>>[ 2.659880] cfg80211: Loading compiled-in X.509 certificates for
> >>>regulatory database
> >>>[ 2.674031] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
> >>>[ 2.682013] platform regulatory.0: Direct firmware load for
> >>>regulatory.db failed with error -2
> >>>[ 2.690851] cfg80211: failed to load regulatory.db
> >>>[ 2.695737] ALSA device list:
> >>>[ 2.698762] No soundcards found.
> >>>[ 3.592224] EXT4-fs (mmcblk0p2): recovery complete
> >>>[ 3.602020] EXT4-fs (mmcblk0p2): mounted filesystem with ordered
> >>>data mode. Opts: (null)
> >>>[ 3.610371] VFS: Mounted root (ext4 filesystem) on device 179:2.
> >>>[ 3.618708] devtmpfs: mounted
> >>>[ 3.624665] Freeing unused kernel memory: 1024K
> >>>[ 3.743951] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
> >>>Starting logging: OK
> >>>Initializing random number generator... [ 3.897748] random: dd:
> >>>uninitialized urandom read (512 bytes read)
> >>>done.
> >>>Starting network: OK
> >>>
> >>>Welcome to Engicam i.CoreM6 Quad/Dual/DualLite/Solo
> >>>buildroot login: root
> >>># media-ctl -l "'ov5640 2-003c':0 -> 'imx6-mipi-csi2':0[1]"
> >>># media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]"
> >>># media-ctl -l "'ipu1_csi1':1 -> 'ipu1_ic_prp':0[1]"
> >>># media-ctl -l "'ipu1_ic_prp':1 -> 'ipu1_ic_prpenc':0[1]"
> >>># media-ctl -l "'ipu1_ic_prpenc':1 -> 'ipu1_ic_prpenc capture':0[1]"
> >>># media-ctl -V "'ov5640 2-003c':0 [fmt:UYVY2X8/640x480 field:none]"
> >>># media-ctl -V "'imx6-mipi-csi2':2 [fmt:UYVY2X8/640x480 field:none]"
> >>># media-ctl -V "'ipu1_csi1':1 [fmt:AYUV32/640x480 field:none]"
> >>># media-ctl -V "'ipu1_ic_prp':1 [fmt:AYUV32/640x480 field:none]"
> >>># media-ctl -V "'ipu1_ic_prpenc':1 [fmt:AYUV32/640x480 field:none]"
> >>># med# media-ctl -p
> >>>Media controller API version 4.17.0
> >>>
> >>>Media device information
> >>>------------------------
> >>>driver imx-media
> >>>model imx-media
> >>>serial
> >>>bus info
> >>>hw revision 0x0
> >>>driver version 4.17.0
> >>>
> >>>Device topology
> >>>- entity 1: ov5640 2-003c (1 pad, 1 link)
> >>> type V4L2 subdev subtype Sensor flags 0
> >>> device node name /dev/v4l-subdev0
> >>>pad0: Source
> >>>[fmt:UYVY8_2X8/640x480 field:none]
> >>>-> "imx6-mipi-csi2":0 [ENABLED]
> >>>
> >>>- entity 3: ipu1_vdic (3 pads, 3 links)
> >>> type V4L2 subdev subtype Unknown flags 0
> >>> device node name /dev/v4l-subdev1
> >>>pad0: Sink
> >>>[fmt:AYUV8_1X32/640x480 field:none]
> >>><- "ipu1_csi0":1 []
> >>><- "ipu1_csi1":1 []
> >>>pad1: Sink
> >>>[fmt:UYVY8_2X8/640x480 field:none]
> >>>pad2: Source
> >>>[fmt:AYUV8_1X32/640x480 field:none]
> >>>-> "ipu1_ic_prp":0 []
> >>>
> >>>- entity 7: ipu2_vdic (3 pads, 3 links)
> >>> type V4L2 subdev subtype Unknown flags 0
> >>> device node name /dev/v4l-subdev2
> >>>pad0: Sink
> >>>[fmt:AYUV8_1X32/640x480 field:none]
> >>><- "ipu2_csi0":1 []
> >>><- "ipu2_csi1":1 []
> >>>pad1: Sink
> >>>[fmt:UYVY8_2X8/640x480 field:none]
> >>>pad2: Source
> >>>[fmt:AYUV8_1X32/640x480 field:none]
> >>>-> "ipu2_ic_prp":0 []
> >>>
> >>>- entity 11: ipu1_ic_prp (3 pads, 5 links)
> >>> type V4L2 subdev subtype Unknown flags 0
> >>> device node name /dev/v4l-subdev3
> >>>pad0: Sink
> >>>[fmt:AYUV8_1X32/640x480 field:none]
> >>><- "ipu1_vdic":2 []
> >>><- "ipu1_csi0":1 []
> >>><- "ipu1_csi1":1 [ENABLED]
> >>>pad1: Source
> >>>[fmt:AYUV8_1X32/640x480 field:none]
> >>>-> "ipu1_ic_prpenc":0 [ENABLED]
> >>>pad2: Source
> >>>[fmt:AYUV8_1X32/640x480 field:none]
> >>>-> "ipu1_ic_prpvf":0 []
> >>>
> >>>- entity 15: ipu1_ic_prpenc (2 pads, 2 links)
> >>> type V4L2 subdev subtype Unknown flags 0
> >>> device node name /dev/v4l-subdev4
> >>>pad0: Sink
> >>>[fmt:AYUV8_1X32/640x480 field:none]
> >>><- "ipu1_ic_prp":1 [ENABLED]
> >>>pad1: Source
> >>>[fmt:AYUV8_1X32/640x480 field:none]
> >>>-> "ipu1_ic_prpenc capture":0 [ENABLED]
> >>>
> >>>- entity 18: ipu1_ic_prpenc capture (1 pad, 1 link)
> >>> type Node subtype V4L flags 0
> >>> device node name /dev/video0
> >>>pad0: Sink
> >>><- "ipu1_ic_prpenc":1 [ENABLED]
> >>>
> >>>- entity 24: ipu1_ic_prpvf (2 pads, 2 links)
> >>> type V4L2 subdev subtype Unknown flags 0
> >>> device node name /dev/v4l-subdev5
> >>>pad0: Sink
> >>>[fmt:AYUV8_1X32/640x480 field:none]
> >>><- "ipu1_ic_prp":2 []
> >>>pad1: Source
> >>>[fmt:AYUV8_1X32/640x480 field:none]
> >>>-> "ipu1_ic_prpvf capture":0 []
> >>>
> >>>- entity 27: ipu1_ic_prpvf capture (1 pad, 1 link)
> >>> type Node subtype V4L flags 0
> >>> device node name /dev/video1
> >>>pad0: Sink
> >>><- "ipu1_ic_prpvf":1 []
> >>>
> >>>- entity 33: ipu2_ic_prp (3 pads, 5 links)
> >>> type V4L2 subdev subtype Unknown flags 0
> >>> device node name /dev/v4l-subdev6
> >>>pad0: Sink
> >>>[fmt:AYUV8_1X32/640x480 field:none]
> >>><- "ipu2_vdic":2 []
> >>><- "ipu2_csi0":1 []
> >>><- "ipu2_csi1":1 []
> >>>pad1: Source
> >>>[fmt:AYUV8_1X32/640x480 field:none]
> >>>-> "ipu2_ic_prpenc":0 []
> >>>pad2: Source
> >>>[fmt:AYUV8_1X32/640x480 field:none]
> >>>-> "ipu2_ic_prpvf":0 []
> >>>
> >>>- entity 37: ipu2_ic_prpenc (2 pads, 2 links)
> >>> type V4L2 subdev subtype Unknown flags 0
> >>> device node name /dev/v4l-subdev7
> >>>pad0: Sink
> >>>[fmt:AYUV8_1X32/640x480 field:none]
> >>><- "ipu2_ic_prp":1 []
> >>>pad1: Source
> >>>[fmt:AYUV8_1X32/640x480 field:none]
> >>>-> "ipu2_ic_prpenc capture":0 []
> >>>
> >>>- entity 40: ipu2_ic_prpenc capture (1 pad, 1 link)
> >>> type Node subtype V4L flags 0
> >>> device node name /dev/video2
> >>>pad0: Sink
> >>><- "ipu2_ic_prpenc":1 []
> >>>
> >>>- entity 46: ipu2_ic_prpvf (2 pads, 2 links)
> >>> type V4L2 subdev subtype Unknown flags 0
> >>> device node name /dev/v4l-subdev8
> >>>pad0: Sink
> >>>[fmt:AYUV8_1X32/640x480 field:none]
> >>><- "ipu2_ic_prp":2 []
> >>>pad1: Source
> >>>[fmt:AYUV8_1X32/640x480 field:none]
> >>>-> "ipu2_ic_prpvf capture":0 []
> >>>
> >>>- entity 49: ipu2_ic_prpvf capture (1 pad, 1 link)
> >>> type Node subtype V4L flags 0
> >>> device node name /dev/video3
> >>>pad0: Sink
> >>><- "ipu2_ic_prpvf":1 []
> >>>
> >>>- entity 55: ipu1_csi0 (3 pads, 4 links)
> >>> type V4L2 subdev subtype Unknown flags 0
> >>> device node name /dev/v4l-subdev9
> >>>pad0: Sink
> >>>[fmt:UYVY8_2X8/640x480 field:none
> >>>crop.bounds:(0,0)/640x480
> >>>crop:(0,0)/640x480
> >>>compose.bounds:(0,0)/640x480
> >>>compose:(0,0)/640x480]
> >>><- "ipu1_csi0_mux":2 []
> >>>pad1: Source
> >>>[fmt:AYUV8_1X32/640x480 field:none]
> >>>-> "ipu1_ic_prp":0 []
> >>>-> "ipu1_vdic":0 []
> >>>pad2: Source
> >>>[fmt:AYUV8_1X32/640x480 field:none]
> >>>-> "ipu1_csi0 capture":0 []
> >>>
> >>>- entity 59: ipu1_csi0 capture (1 pad, 1 link)
> >>> type Node subtype V4L flags 0
> >>> device node name /dev/video4
> >>>pad0: Sink
> >>><- "ipu1_csi0":2 []
> >>>
> >>>- entity 65: ipu1_csi1 (3 pads, 4 links)
> >>> type V4L2 subdev subtype Unknown flags 0
> >>> device node name /dev/v4l-subdev10
> >>>pad0: Sink
> >>>[fmt:UYVY8_2X8/640x480 field:none
> >>>crop.bounds:(0,0)/640x480
> >>>crop:(0,0)/640x480
> >>>compose.bounds:(0,0)/640x480
> >>>compose:(0,0)/640x480]
> >>><- "imx6-mipi-csi2":2 [ENABLED]
> >>>pad1: Source
> >>>[fmt:AYUV8_1X32/640x480 field:none]
> >>>-> "ipu1_ic_prp":0 [ENABLED]
> >>>-> "ipu1_vdic":0 []
> >>>pad2: Source
> >>>[fmt:AYUV8_1X32/640x480 field:none]
> >>>-> "ipu1_csi1 capture":0 []
> >>>
> >>>- entity 69: ipu1_csi1 capture (1 pad, 1 link)
> >>> type Node subtype V4L flags 0
> >>> device node name /dev/video5
> >>>pad0: Sink
> >>><- "ipu1_csi1":2 []
> >>>
> >>>- entity 75: ipu2_csi0 (3 pads, 4 links)
> >>> type V4L2 subdev subtype Unknown flags 0
> >>> device node name /dev/v4l-subdev11
> >>>pad0: Sink
> >>>[fmt:UYVY8_2X8/640x480 field:none
> >>>crop.bounds:(0,0)/640x480
> >>>crop:(0,0)/640x480
> >>>compose.bounds:(0,0)/640x480
> >>>compose:(0,0)/640x480]
> >>><- "imx6-mipi-csi2":3 []
> >>>pad1: Source
> >>>[fmt:AYUV8_1X32/640x480 field:none]
> >>>-> "ipu2_ic_prp":0 []
> >>>-> "ipu2_vdic":0 []
> >>>pad2: Source
> >>>[fmt:AYUV8_1X32/640x480 field:none]
> >>>-> "ipu2_csi0 capture":0 []
> >>>
> >>>- entity 79: ipu2_csi0 capture (1 pad, 1 link)
> >>> type Node subtype V4L flags 0
> >>> device node name /dev/video6
> >>>pad0: Sink
> >>><- "ipu2_csi0":2 []
> >>>
> >>>- entity 85: ipu2_csi1 (3 pads, 4 links)
> >>> type V4L2 subdev subtype Unknown flags 0
> >>> device node name /dev/v4l-subdev12
> >>>pad0: Sink
> >>>[fmt:UYVY8_2X8/640x480 field:none
> >>>crop.bounds:(0,0)/640x480
> >>>crop:(0,0)/640x480
> >>>compose.bounds:(0,0)/640x480
> >>>compose:(0,0)/640x480]
> >>><- "ipu2_csi1_mux":2 []
> >>>pad1: Source
> >>>[fmt:AYUV8_1X32/640x480 field:none]
> >>>-> "ipu2_ic_prp":0 []
> >>>-> "ipu2_vdic":0 []
> >>>pad2: Source
> >>>[fmt:AYUV8_1X32/640x480 field:none]
> >>>-> "ipu2_csi1 capture":0 []
> >>>
> >>>- entity 89: ipu2_csi1 capture (1 pad, 1 link)
> >>> type Node subtype V4L flags 0
> >>> device node name /dev/video7
> >>>pad0: Sink
> >>><- "ipu2_csi1":2 []
> >>>
> >>>- entity 95: imx6-mipi-csi2 (5 pads, 5 links)
> >>> type V4L2 subdev subtype Unknown flags 0
> >>> device node name /dev/v4l-subdev13
> >>>pad0: Sink
> >>>[fmt:UYVY8_2X8/640x480 field:none]
> >>><- "ov5640 2-003c":0 [ENABLED]
> >>>pad1: Source
> >>>[fmt:UYVY8_2X8/640x480 field:none]
> >>>-> "ipu1_csi0_mux":0 []
> >>>pad2: Source
> >>>[fmt:UYVY8_2X8/640x480 field:none]
> >>>-> "ipu1_csi1":0 [ENABLED]
> >>>pad3: Source
> >>>[fmt:UYVY8_2X8/640x480 field:none]
> >>>-> "ipu2_csi0":0 []
> >>>pad4: Source
> >>>[fmt:UYVY8_2X8/640x480 field:none]
> >>>-> "ipu2_csi1_mux":0 []
> >>>
> >>>- entity 101: ipu1_csi0_mux (3 pads, 2 links)
> >>> type V4L2 subdev subtype Unknown flags 0
> >>> device node name /dev/v4l-subdev14
> >>>pad0: Sink
> >>>[fmt:unknown/0x0]
> >>><- "imx6-mipi-csi2":1 []
> >>>pad1: Sink
> >>>[fmt:unknown/0x0]
> >>>pad2: Source
> >>>[fmt:unknown/0x0]
> >>>-> "ipu1_csi0":0 []
> >>>
> >>>- entity 105: ipu2_csi1_mux (3 pads, 2 links)
> >>> type V4L2 subdev subtype Unknown flags 0
> >>> device node name /dev/v4l-subdev15
> >>>pad0: Sink
> >>>[fmt:unknown/0x0]
> >>><- "imx6-mipi-csi2":4 []
> >>>pad1: Sink
> >>>[fmt:unknown/0x0]
> >>>pad2: Source
> >>>[fmt:unknown/0x0]
> >>>-> "ipu2_csi1":0 []
> >>>
> >>># GST_DEBUG="v4l2*:5" gst-launch-1.0 -v v4l2src device=/dev/video1 ! \
> >>>>autovideosink
> >>>0:00:01.086281666 185 0x1dce880 DEBUG v4l2
> >>>gstv4l2object.c:1487:gst_v4l2_object_v4l1
> >>>0:00:01.087369666 185 0x1dce880 DEBUG v4l2
> >>>gstv4l2object.c:1487:gst_v4l2_object_v4l5
> >>>0:00:01.088496000 185 0x1dce880 DEBUG v4l2
> >>>gstv4l2object.c:1487:gst_v4l2_object_v4l.
> >>>0:00:01.089540333 185 0x1dce880 DEBUG v4l2
> >>>gstv4l2object.c:1487:gst_v4l2_object_v4lR
> >>>0:00:01.090494666 185 0x1dce880 DEBUG v4l2
> >>>gstv4l2object.c:1487:gst_v4l2_object_v4lH
> >>>0:00:01.091657666 185 0x1dce880 DEBUG v4l2
> >>>gstv4l2object.c:1487:gst_v4l2_object_v4l4
> >>>0:00:01.092745000 185 0x1dce880 DEBUG v4l2
> >>>gstv4l2object.c:1487:gst_v4l2_object_v4l
> >>>0:00:01.093703333 185 0x1dce880 DEBUG v4l2
> >>>gstv4l2object.c:1487:gst_v4l2_object_v4l
> >>>0:00:01.094854000 185 0x1dce880 DEBUG v4l2
> >>>gstv4l2object.c:1487:gst_v4l2_object_v4l
> >>>0:00:01.095815000 185 0x1dce880 DEBUG v4l2
> >>>gstv4l2object.c:1487:gst_v4l2_object_v4l
> >>>0:00:01.096818666 185 0x1dce880 DEBUG v4l2
> >>>gstv4l2object.c:1487:gst_v4l2_object_v4lB
> >>>0:00:01.097819000 185 0x1dce880 DEBUG v4l2
> >>>gstv4l2object.c:1487:gst_v4l2_object_v4l8
> >>>0:00:01.098771000 185 0x1dce880 DEBUG v4l2
> >>>gstv4l2object.c:1487:gst_v4l2_object_v4l
> >>>0:00:01.099798666 185 0x1dce880 DEBUG v4l2
> >>>gstv4l2object.c:1487:gst_v4l2_object_v4l1
> >>>0:00:01.100776666 185 0x1dce880 DEBUG v4l2
> >>>gstv4l2object.c:1487:gst_v4l2_object_v4lV
> >>>0:00:01.101755333 185 0x1dce880 DEBUG v4l2
> >>>gstv4l2object.c:1487:gst_v4l2_object_v4lY
> >>>0:00:01.102771666 185 0x1dce880 DEBUG v4l2
> >>>gstv4l2object.c:1487:gst_v4l2_object_v4lP
> >>>0:00:01.103712000 185 0x1dce880 DEBUG v4l2
> >>>gstv4l2object.c:1487:gst_v4l2_object_v4l4
> >>>0:00:01.104720000 185 0x1dce880 DEBUG v4l2
> >>>gstv4l2object.c:1487:gst_v4l2_object_v4lO
> >>>0:00:01.105697000 185 0x1dce880 DEBUG v4l2
> >>>gstv4l2object.c:1487:gst_v4l2_object_v4lP
> >>>0:00:01.106629666 185 0x1dce880 DEBUG v4l2
> >>>gstv4l2object.c:1487:gst_v4l2_object_v4l4
> >>>0:00:01.107681666 185 0x1dce880 DEBUG v4l2
> >>>gstv4l2object.c:1487:gst_v4l2_object_v4l4
> >>>0:00:01.108660666 185 0x1dce880 DEBUG v4l2
> >>>gstv4l2object.c:1487:gst_v4l2_object_v4l2
> >>>0:00:01.442437333 185 0x1dce880 DEBUG v4l2
> >>>gstv4l2object.c:1487:gst_v4l2_object_v4l0
> >>>0:00:01.444673333 185 0x1dce880 DEBUG v4l2
> >>>gstv4l2object.c:1487:gst_v4l2_object_v4l2
> >>>0:00:01.446842000 185 0x1dce880 DEBUG v4l2
> >>>gstv4l2object.c:1487:gst_v4l2_object_v4l2
> >>>0:00:01.449084000 185 0x1dce880 DEBUG v4l2
> >>>gstv4l2object.c:1487:gst_v4l2_object_v4l4
> >>>Setting pipeline to PAUSED ...
> >>>0:00:01.680823000 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:524:gst_v4l2_open:<v4l2src01
> >>>0:00:01.681953333 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:69:gst_v4l2_get_capabilities
> >>>0:00:01.683098666 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:140:gst_v4l2_fill_lists:<v4s
> >>>0:00:01.684056666 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:143:gst_v4l2_fill_lists:<v4s
> >>>0:00:01.685201000 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:215:gst_v4l2_fill_lists:<v4s
> >>>0:00:01.686159333 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> >>>0:00:01.687207666 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4C
> >>>0:00:01.688183666 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> >>>0:00:01.689155333 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4M
> >>>0:00:01.690142000 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> >>>0:00:01.691114000 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4P
> >>>0:00:01.692080000 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> >>>0:00:01.693073000 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4R
> >>>0:00:01.694043000 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> >>>0:00:01.695760000 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4L
> >>>0:00:01.696736333 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> >>>0:00:01.697708000 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4G
> >>>0:00:01.698699000 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> >>>0:00:01.699667000 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4H
> >>>0:00:01.700633000 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> >>>0:00:01.701623666 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4I
> >>>0:00:01.702591000 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> >>>0:00:01.703554333 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4K
> >>>0:00:01.704604000 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> >>>0:00:01.705576666 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4M
> >>>0:00:01.706567000 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> >>>0:00:02.040204667 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4B
> >>>0:00:02.042194667 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> >>>0:00:02.044190000 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4G
> >>>0:00:02.046338333 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> >>>0:00:02.048327667 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4H
> >>>0:00:02.050296000 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> >>>0:00:02.052385000 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4K
> >>>0:00:02.054376000 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> >>>0:00:02.056461333 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4L
> >>>0:00:02.058434000 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> >>>0:00:02.060423667 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4c
> >>>0:00:02.062382667 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:263:gst_v4l2_fill_lists:<v4s
> >>>0:00:02.064291333 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:283:gst_v4l2_fill_lists:<v40
> >>>0:00:02.066224667 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:292:gst_v4l2_fill_lists:<v4.
> >>>0:00:02.067190333 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:283:gst_v4l2_fill_lists:<v40
> >>>0:00:02.068174333 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:300:gst_v4l2_fill_lists:<v40
> >>>0:00:02.069141000 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:283:gst_v4l2_fill_lists:<v40
> >>>0:00:02.070113000 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:305:gst_v4l2_fill_lists:<v4d
> >>>0:00:02.071088333 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:456:gst_v4l2_fill_lists:<v4e
> >>>0:00:02.072040000 185 0x1dce880 INFO v4l2
> >>>v4l2_calls.c:592:gst_v4l2_open:<v4l2src0y
> >>>0:00:02.073017333 185 0x1dce880 DEBUG v4l2
> >>>gstv4l2object.c:804:gst_v4l2_set_default)
> >>>0:00:02.074010667 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:740:gst_v4l2_get_norm:<v4l2m
> >>>0:00:02.075021000 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:754:gst_v4l2_get_norm: Fail1
> >>>0:00:02.076012000 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:1027:gst_v4l2_get_input:<v4t
> >>>Pipeline is live and does not need PREROLL ...
> >>>0:00:02.080105333 185 0x1ec39b0 DEBUG v4l2
> >>>gstv4l2object.c:1109:gst_v4l2_object_fil.
> >>><v4l2src0> getting src format enumerations
> >>>0:00:02.412981333 185 0x1ec39b0 INFO New clock: GstSystemClock
> >>> v4l2 gstv4l2object.c:1146:gst_v4l2_object_fill_format_list:<v4l2src0>
> >>>got 7 format(s):
> >>>0:00:02.415407667 185 0x1ec39b0 INFO v4l2
> >>>gstv4l2object.c:1152:gst_v4l2_object_filV
> >>>0:00:02.417531667 185 0x1ec39b0 INFO v4l2
> >>>gstv4l2object.c:1152:gst_v4l2_object_filY
> >>>0:00:02.419703667 185 0x1ec39b0 INFO v4l2
> >>>gstv4l2object.c:1152:gst_v4l2_object_filP
> >>>0:00:02.421860000 185 0x1ec39b0 INFO v4l2
> >>>gstv4l2object.c:1152:gst_v4l2_object_fil2
> >>>0:00:02.424022667 185 0x1ec39b0 INFO v4l2
> >>>gstv4l2object.c:1152:gst_v4l2_object_fil2
> >>>0:00:02.426295000 185 0x1ec39b0 INFO v4l2
> >>>gstv4l2object.c:1152:gst_v4l2_object_fil6
> >>>0:00:02.428481333 185 0x1ec39b0 INFO v4l2
> >>>gstv4l2object.c:1152:gst_v4l2_object_fil2
> >>>0:00:02.430728333 185 0x1ec39b0 DEBUG v4l2
> >>>gstv4l2object.c:2564:gst_v4l2_object_proV
> >>>0:00:02.432985333 185 0x1ec39b0 DEBUG v4l2
> >>>gstv4l2object.c:2691:gst_v4l2_object_pro)
> >>>0:00:02.436117000 185 0x1ec39b0 DEBUG v4l2
> >>>gstv4l2object.c:2564:gst_v4l2_object_proY
> >>>0:00:02.437252333 185 0x1ec39b0 DEBUG v4l2
> >>>gstv4l2object.c:2691:gst_v4l2_object_pro)
> >>>0:00:02.438579000 185 0x1ec39b0 DEBUG v4l2
> >>>gstv4l2object.c:2564:gst_v4l2_object_proP
> >>>0:00:02.439656000 185 0x1ec39b0 DEBUG v4l2
> >>>gstv4l2object.c:2691:gst_v4l2_object_pro)
> >>>0:00:02.441016667 185 0x1ec39b0 DEBUG v4l2
> >>>gstv4l2object.c:2564:gst_v4l2_object_pro2
> >>>0:00:02.442092333 185 0x1ec39b0 DEBUG v4l2
> >>>gstv4l2object.c:2691:gst_v4l2_object_pro)
> >>>0:00:02.443443333 185 0x1ec39b0 DEBUG v4l2
> >>>gstv4l2object.c:2564:gst_v4l2_object_pro2
> >>>0:00:02.444626667 185 0x1ec39b0 DEBUG v4l2
> >>>gstv4l2object.c:2691:gst_v4l2_object_pro)
> >>>0:00:02.445990667 185 0x1ec39b0 DEBUG v4l2
> >>>gstv4l2object.c:2564:gst_v4l2_object_pro6
> >>>0:00:02.447063667 185 0x1ec39b0 DEBUG v4l2
> >>>gstv4l2object.c:2691:gst_v4l2_object_pro)
> >>>0:00:02.448410333 185 0x1ec39b0 DEBUG v4l2
> >>>gstv4l2object.c:2564:gst_v4l2_object_pro2
> >>>0:00:02.782148333 185 0x1ec39b0 DEBUG v4l2
> >>>gstv4l2object.c:2691:gst_v4l2_object_pro)
> >>>0:00:02.785264333 185 0x1ec39b0 INFO v4l2
> >>>gstv4l2object.c:3967:gst_v4l2_object_get}
> >>>0:00:02.788800000 185 0x1ec39b0 DEBUG v4l2src
> >>>gstv4l2src.c:300:gst_v4l2src_negotiate:<}
> >>>0:00:02.792207000 185 0x1ec39b0 DEBUG v4l2src
> >>>gstv4l2src.c:308:gst_v4l2src_negotiate:<]
> >>>0:00:02.795419000 185 0x1ec39b0 DEBUG v4l2src
> >>>gstv4l2src.c:316:gst_v4l2src_negotiate:<}
> >>>0:00:03.132052667 185 0x1ec39b0 DEBUG v4l2src
> >>>gstv4l2src.c:256:gst_v4l2src_fixate:<v4l}
> >>>0:00:03.134399667 185 0x1ec39b0 DEBUG v4l2src
> >>>gstv4l2src.c:282:gst_v4l2src_fixate:<v4l}
> >>>0:00:03.136800667 185 0x1ec39b0 DEBUG v4l2src
> >>>gstv4l2src.c:367:gst_v4l2src_negotiate:<1
> >>>0:00:03.139067333 185 0x1ec39b0 DEBUG v4l2
> >>>gstv4l2object.c:3887:gst_v4l2_object_stog
> >>>0:00:03.141452000 185 0x1ec39b0 DEBUG v4l2
> >>>gstv4l2object.c:3176:gst_v4l2_object_seto
> >>>0:00:03.143608667 185 0x1ec39b0 DEBUG v4l2
> >>>gstv4l2object.c:3310:gst_v4l2_object_set0
> >>>0:00:03.146025333 185 0x1ec39b0 DEBUG v4l2
> >>>gstv4l2object.c:3361:gst_v4l2_object_set1
> >>>0:00:03.148229000 185 0x1ec39b0 DEBUG v4l2
> >>>gstv4l2object.c:3370:gst_v4l2_object_set0
> >>>0:00:03.150373667 185 0x1ec39b0 DEBUG v4l2
> >>>gstv4l2object.c:3404:gst_v4l2_object_set1
> >>>0:00:03.152589667 185 0x1ec39b0 DEBUG v4l2
> >>>gstv4l2object.c:3414:gst_v4l2_object_set0
> >>>0:00:03.155250667 185 0x1ec39b0 DEBUG v4l2
> >>>gstv4l2object.c:3455:gst_v4l2_object_set1
> >>>0:00:03.156584667 185 0x1ec39b0 DEBUG v4l2
> >>>gstv4l2object.c:3472:gst_v4l2_object_set1
> >>>0:00:03.157659333 185 0x1ec39b0 INFO v4l2
> >>>gstv4l2object.c:3504:gst_v4l2_object_set1
> >>>0:00:03.491432000 185 0x1ec39b0 DEBUG v4l2
> >>>gstv4l2object.c:2960:gst_v4l2_object_ext0
> >>>0:00:03.493645333 185 0x1ec39b0 DEBUG v4l2
> >>>gstv4l2object.c:3071:gst_v4l2_object_sav0
> >>>0:00:03.496027333 185 0x1ec39b0 DEBUG v4l2
> >>>gstv4l2object.c:2843:gst_v4l2_object_setm
> >>>0:00:03.498180000 185 0x1ec39b0 INFO v4l2
> >>>gstv4l2object.c:2867:gst_v4l2_object_set2
> >>>0:00:03.502772000 185 0x1ec39b0 DEBUG v4l2bufferpool
> >>>gstv4l2bufferpool.c:509:gst_v4l2_buffer_;
> >>>0:00:03.505283333 185 0x1ec39b0 INFO v4l2bufferpool
> >>>gstv4l2bufferpool.c:557:gst_v4l2_buffer_2
> >>>0:00:03.507120000 185 0x1ec39b0 INFO v4l2bufferpool
> >>>gstv4l2bufferpool.c:570:gst_v4l2_buffer_2
> >>>/GstPipeline:pipeline0/GstV4l2Src:v4l2src0.GstPad:src: caps =
> >>>video/x-raw, format=(string)YUY2, width=(i1
> >>>/GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0.GstGhostPad:sink.GstProxyPad:proxypad0:
> >>>caps = vi1
> >>>/GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0/GstKMSSink:autovideosink0-actual-sink-kms.GstPad:1
> >>>0:00:03/GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0.GstGhostPad:sink:
> >>>caps = video/x-raw, form1
> >>>.512440000 185 0x1ec39b0 DEBUG v4l2
> >>>gstv4l2object.c:3985:gst_v4l2_object_decide_alln
> >>>0:00:03.513556667 185 0x1ec39b0 DEBUG v4l2
> >>>gstv4l2object.c:4011:gst_v4l2_object_dec>
> >>>0:00:03.514745667 185 0x1ec39b0 DEBUG v4l2
> >>>gstv4l2object.c:4069:gst_v4l2_object_dec>
> >>>0:00:03.515889000 185 0x1ec39b0 DEBUG v4l2
> >>>gstv4l2object.c:4134:gst_v4l2_object_deca
> >>>0:00:03.516969667 185 0x1ec39b0 DEBUG v4l2
> >>>gstv4l2object.c:4143:gst_v4l2_object_dec;
> >>>0:00:03.851350333 185 0x1ec39b0 DEBUG v4l2bufferpool
> >>>gstv4l2bufferpool.c:509:gst_v4l2_buffer_2
> >>>ams)NULL, options=(string)< GstBufferPoolOptionVideoMeta >;
> >>>0:00:03.853620333 185 0x1ec39b0 INFO v4l2bufferpool
> >>>gstv4l2bufferpool.c:570:gst_v4l2_buffer_2
> >>>0:00:03.855780667 185 0x1ec39b0 DEBUG v4l2
> >>>gstv4l2object.c:4150:gst_v4l2_object_dec;
> >>>0:00:03.858430000 185 0x1ec39b0 DEBUG v4l2bufferpool
> >>>gstv4l2bufferpool.c:509:gst_v4l2_buffer_;
> >>>0:00:03.861572333 185 0x1ec39b0 DEBUG v4l2bufferpool
> >>>gstv4l2bufferpool.c:707:gst_v4l2_buffer_l
> >>>0:00:03.863468333 185 0x1ec39b0 DEBUG v4l2bufferpool
> >>>gstv4l2bufferpool.c:737:gst_v4l2_buffer_s
> >>>0:00:03.918861000 185 0x1ec39b0 DEBUG v4l2allocator
> >>>gstv4l2allocator.c:706:gst_v4l2_allocatod
> >>>0:00:03.943783333 185 0x1ec39b0 DEBUG v4l2bufferpool
> >>>gstv4l2bufferpool.c:1389:gst_v4l2_buffer8
> >>>0:00:03.946129333 185 0x1ec39b0 DEBUG v4l2bufferpool
> >>>gstv4l2bufferpool.c:1389:gst_v4l2_buffer8
> >>>0:00:03.948065000 185 0x1ec39b0 DEBUG v4l2bufferpool
> >>>gstv4l2bufferpool.c:1389:gst_v4l2_buffer8
> >>>0:00:03.950006000 185 0x1ec39b0 DEBUG v4l2bufferpool
> >>>gstv4l2bufferpool.c:952:gst_v4l2_buffer_g
> >>>0:00:03.996241333 185 0x1ec39b0 ERROR v4l2bufferpool
> >>>gstv4l2bufferpool.c:641:gst_v4l2_buffer_)
> >>>0:00:03.998199667 185 0x1ec39b0 DEBUG v4l2bufferpool
> >>>gstv4l2bufferpool.c:1311:gst_v4l2_buffere
> >>>0:00:04.000463000 185 0x1ec39b0 WARN v4l2bufferpool
> >>>gstv4l2bufferpool.c:1064:gst_v4l2_buffer)
> >>>0:00:04.004649333 185 0x1ec39b0 DEBUG v4l2bufferpool
> >>>gstv4l2bufferpool.c:1283:gst_v4l2_bufferr
> >>>0:00:04.005853333 185 0x1ec39b0 WARN v4l2src
> >>>gstv4l2src.c:866:gst_v4l2src_create:<v4lr
> >>>ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Could
> >>>not read from resource.
> >>>Additional debug info:
> >>>gstv4l2bufferpool.c(1064): gst_v4l2_buffer_pool_poll ():
> >>>/GstPipeline:pipeline0/GstV4l2Src:v4l2src0:
> >>>poll error 1: Resource temporarily unavailable (11)
> >>>Execution ended after 0:00:01.606871334
> >>>Setting pipeline to PAUSED ...
> >>>0:00:04.022385000 185 0x1dce880 DEBUG v4l2bufferpool
> >>>gstv4l2bufferpool.c:931:gst_v4l2_buffer_g
> >>>Setting pipeline to READY ...
> >>>0:00:04.024850667 185 0x1dce880 DEBUG v4l2bufferpool
> >>>gstv4l2bufferpool.c:879:gst_v4l2_buffer_l
> >>>0:00:04.026764000 185 0x1dce880 DEBUG v4l2allocator
> >>>gstv4l2allocator.c:757:gst_v4l2_allocator
> >>>0:00:04.028598333 185 0x1dce880 DEBUG v4l2allocator
> >>>gstv4l2allocator.c:765:gst_v4l2_allocatoe
> >>>0:00:04.362785667 185 0x1dce880 WARN v4l2bufferpool
> >>>gstv4l2bufferpool.c:918:gst_v4l2_buffer_g
> >>>0:00:04.364712333 185 0x1dce880 DEBUG v4l2bufferpool
> >>>gstv4l2bufferpool.c:952:gst_v4l2_buffer_g
> >>>0:00:04.366504333 185 0x1dce880 DEBUG v4l2bufferpool
> >>>gstv4l2bufferpool.c:629:gst_v4l2_buffer_g
> >>>0:00:04.368607000 185 0x1dce880 DEBUG v4l2
> >>>gstv4l2object.c:3887:gst_v4l2_object_stog
> >>>0:00:04.370713333 185 0x1dce880 DEBUG v4l2
> >>>gstv4l2object.c:3895:gst_v4l2_object_stol
> >>>0:00:04.372809333 185 0x1dce880 DEBUG v4l2bufferpool
> >>>gstv4l2bufferpool.c:931:gst_v4l2_buffer_g
> >>>0:00:04.374732000 185 0x1dce880 DEBUG v4l2bufferpool
> >>>gstv4l2bufferpool.c:879:gst_v4l2_buffer_l
> >>>0:00:04.376541000 185 0x1dce880 DEBUG v4l2bufferpool
> >>>gstv4l2bufferpool.c:663:gst_v4l2_buffer_g
> >>>0:00:04.378334000 185 0x1dce880 DEBUG v4l2allocator
> >>>gstv4l2allocator.c:757:gst_v4l2_allocator
> >>>Setting pipeline to NULL ...
> >>>0:00:04.394764333 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:716:gst_v4l2_close:<v4l2src1
> >>>0:00:04.395897667 185 0x1dce880 DEBUG v4l2
> >>>v4l2_calls.c:464:gst_v4l2_empty_lists:<vs
> >>>Freeing pipeline ...
> >>>
> >>>[1] https://linuxtv.org/downloads/v4l-dvb-apis/v4l-drivers/imx.html#sabresd-with-mipi-csi-2-ov5640
> >>>[2] https://paste.ubuntu.com/p/CTvFqdbyMW/
> >>>
> >>>Jagan.
> >>>
> >>>--
> >>>Jagan Teki
> >>>Senior Linux Kernel Engineer | Amarula Solutions
> >>>U-Boot, Linux | Upstream Maintainer
> >>>Hyderabad, India.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
2018-10-17 8:01 ` jacopo mondi
@ 2018-10-19 13:45 ` Adam Ford
2018-10-19 19:42 ` Adam Ford
0 siblings, 1 reply; 38+ messages in thread
From: Adam Ford @ 2018-10-19 13:45 UTC (permalink / raw)
To: jacopo
Cc: steve_longerbeam, Jagan Teki, p.zabel, Fabio Estevam,
gstreamer-devel, linux-media, Linux Kernel Mailing List
On Wed, Oct 17, 2018 at 3:01 AM jacopo mondi <jacopo@jmondi.org> wrote:
>
> Hi Adam, Seve,
>
> On Tue, Oct 16, 2018 at 05:13:24PM -0700, Steve Longerbeam wrote:
> > Hi Adam,
> >
> >
> > On 10/16/18 12:46 PM, Adam Ford wrote:
> > >On Thu, Sep 20, 2018 at 9:58 AM jacopo mondi <jacopo@jmondi.org> wrote:
> > >>Hi imx6 people,
> > >>
> > >>On Thu, May 31, 2018 at 08:39:20PM +0530, Jagan Teki wrote:
> > >>>Hi All,
> > >>>
> > >>>I'm trying to verify MIPI-CSI2 OV5640 camera on i.MX6 platform with
> > >>>Mainline Linux.
> > >>Sorry to resurect this, but before diving deep into details, do anyone
> > >>of you verified JPEG capture with ov5640 and i.MX6 platforms, and has
> > >>maybe a pipeline configuration to share :) ?
> > >
> > >I have a 4.14 kernel for my i.MX6D/Q using an ov5640 connected in a
> > >similar way as the sabresd and I'm getting similar timeouts.
> > >when executing
> > >
> > >media-ctl -l "'ov5640 2-0010':0 -> 'imx6-mipi-csi2':0[1]"
> > >media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]"
> >
> >
> > You're routing through imx6-mipi-csi2 pad 2, which is CSI-2 virtual
> > channel 1, so make sure the ov5640 is transmitting on that channel,
> > see virtual_channel module parameter.
First, I want to apologize for the spam. I don't normally want to ask
for hand-holding, but after spending 4 solid days on this, I'm getting
frustrated, and I've tried to read the instructions, and the technical
reference manual is huge and somewhat overwhelming.
Once I get my hardware working and I develop a better understanding of
how this system works, I'll be more than happy to volunteer to help
test patches on my hardware.
I am not sure I fully understand how the media-ctl handles the
routing. I just basically copied what I could find from some
documentation. I looked for some documentation but I wasn't able to
find much. Maybe you can point me to some.
I can share with you some of my device tree, and I'll try to explain
my connections. Firstly, I have an i.MX6Q and i.MX6Q which share the
same device tree.
The CSI pins on the OV5640 camera go to i.MX6 pins:
CSI_CLK0M / CSI_CLK0P,
CSI_D0M / CSI_D0P,
CSI_D1M / CSI_D1P,
CSI_D2 and D3 pins on the processor are all floating, and CSI_REXT is
grounded through a 6.04k pull-down resistor.
I am not sure if these technically translate to CSI0, CSI1, or CSI2,
but I assumed the CSI2 since that's how the SabreSD board appears to
work.
The ov5640 is connected to i2c3 with the following tree entry:
ov5640: camera@10 {
compatible = "ovti,ov5640";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ov5640>;
reg = <0x10>;
clocks = <&clks IMX6QDL_CLK_CKO>;
clock-names = "xclk";
DOVDD-supply = <&mipi_pwr>;
AVDD-supply = <&mipi_pwr>;
DVDD-supply = <&mipi_pwr>;
reset-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
powerdown-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
port {
ov5640_to_mipi_csi2: endpoint {
remote-endpoint = <&mipi_csi2_in>;
clock-lanes = <0>;
data-lanes = <1 2>;
};
};
I will be the first person to admit, I don't understand how the
clock-lands and data-lanes interact with the mipi_csis and the camera,
but I tried to match the sabresd board device tree.
For the MIPI_CSI interface, I wasn't sure which ports are the proper
reference. Looking at the sabresd board, I used it as an example. I
wasn't sure if port0 and reg 0 were the right options.
&mipi_csi {
status = "okay";
port@0 {
reg = <0>;
mipi_csi2_in: endpoint {
remote-endpoint = <&ov5640_to_mipi_csi2>;
clock-lanes = <0>;
data-lanes = <1 2>;
};
};
};
There was one section of the sabresd board that I wasn't sure I
needed, because I am new to this camera stuff. I wasn't thinking I
needed it, but I copied it because the sabresd board had it. I know
it has two cameras, but the interaction between the csi interface and
the ipu isn't clear to me.
&ipu1_csi1_from_mipi_vc1 {
clock-lanes = <0>;
data-lanes = <1 2>;
};
I am not 100% certain the following is correct, but I tried to disable
unwanted features to help save power, but it's quite possible it's
interfering with the settings i have above.
&ipu1_csi0 {
status = "disabled";
};
&ipu2_csi0 {
status = "disabled";
};
&mipi_dsi {
status = "disabled";
};
> >
> >
> > >media-ctl -l "'ipu1_csi1':1 -> 'ipu1_ic_prp':0[1]"
> > >media-ctl -l "'ipu1_ic_prp':1 -> 'ipu1_ic_prpenc':0[1]"
> > >media-ctl -l "'ipu1_ic_prpenc':1 -> 'ipu1_ic_prpenc capture':0[1]"
> > >
> > >
> > >media-ctl -V "'ov5640 2-0010':0 [fmt:UYVY2X8/640x480 field:none]"
> > >media-ctl -V "'imx6-mipi-csi2':2 [fmt:UYVY2X8/640x480 field:none]"
> > >media-ctl -V "'ipu1_csi1':1 [fmt:AYUV32/640x480 field:none]"
> > >media-ctl -V "'ipu1_ic_prp':1 [fmt:AYUV32/640x480 field:none]"
> > >media-ctl -V "'ipu1_ic_prpenc':1 [fmt:AYUV32/640x480 field:none]"
> > >
> > >
> > > gst-launch-1.0 -v v4l2src num-buffers=1 device=/dev/video0 ! jpegenc
> > >! filesink location=test.jpg
>
> Thanks, am I wrong or jpegenc is a software JPEG encoder?
>
> I was interested in options for capturing the JPEG frames as produced
> by the sensor. I'm not even sure it is possible at all.
I am ok with simple streaming to the screen. I'm ok with converting
to video. At this point, I'm trying to just simply see the camera
work. :-)
>
> > >
> > >[ 72.799015] ipu1_ic_prpenc: EOF timeout
> > >[ 73.838985] ipu1_ic_prpenc: wait last EOF timeout
> > >
> > >When I try to jump directly to 4.19-RC8, I get errors regarding memory
> > >allocation, so I think there might be something else there I am
> > >missing.
> > >
>
> Please share the errors. I am using v4.19-rc7 without issues.
>
> > >Has anyone tried this camera module on a 4.14 kernel? I noticed there
> > >are a bunch of driver updates, and I was hoping there might be some
> > >patches that could be be backported to the 4.14.y stable branch.
> >
> > I would suggest backporting all the ov5640 commits. You can also
> > backport the imx-media commits, but that shouldn't be the cause
> > of the timeouts you are seeing.
> >
>
> Yes, try to backport the recent ov5640 developments on your kernel
> version. There are a lot of fixes there, and I don't think there is
> any dependency on new developments on the v4l2 framework you don't
> have in v4.14 (I might be wrong though).
I ported the entire ov5640 driver, but there appear to be some v4l
changes which preclude me from copying the whole driver. I was hoping
to use as close to stock 4.14 LTS kernel since 4.19 isn't quite done
yet. (I 'think' 4.19 will be an LTS kernel if I'm not mistaken, so
this kernel is open for discussion if we must transition to it)
My i.MX6 board is running some tests now, but I'll try to build
4.19-rc8 and share some logs.
>
> In case something breaks when cherry-picking patches or when building,
> please share and someone might help (I have recently backported those
> changes to a v3.14 kernel, so I might help too).
I first went through the git commit logs for the ov5640 and tried to
grab anything with the word 'fix' in the headlines. I'll try this
afternoon, to get a better feeling for which fixes were ported. In
theory, I can go and request certain fixes to be backported too, but I
want to make sure they actually work before I waste people's time.
adam
>
> Thanks
> j
>
> >
> > Steve
> >
> >
> >
> > >
> > >thanks for any suggestions to try.
> > >
> > >adam
> > >
> > >>Thanks
> > >> j
> > >>
> > >>>I've followed these[1] instructions to configure MC links and pads
> > >>>based on the probing details from dmesg and trying to capture
> > >>>ipu1_ic_prpenc capture (/dev/video1) but it's not working.
> > >>>
> > >>>Can anyone help me to verify whether I configured all the details
> > >>>properly if not please suggest.
> > >>>
> > >>>I'm pasting full log here, so-that anyone can comment in line and dt
> > >>>changes are at [2]
> > >>>
> > >>>Log:
> > >>>-----
> > >>>
> > >>>[ 1.211866] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0
> > >>>[ 1.220211] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 0
> > >>>[ 1.230344] imx-ipuv3 2400000.ipu: IPUv3H probed
> > >>>[ 1.237170] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> > >>>[ 1.243920] [drm] No driver support for vblank timestamp query.
> > >>>[ 1.250831] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops
> > >>>ipu_crtc_ops)
> > >>>[ 1.258503] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops
> > >>>ipu_crtc_ops)
> > >>>[ 1.266293] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops
> > >>>ipu_crtc_ops)
> > >>>[ 1.274027] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops
> > >>>ipu_crtc_ops)
> > >>>[ 1.282304] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller
> > >>>v1.30a with HDCP (DWC HDMI 3D TX PHY)
> > >>>[ 1.295722] imx-drm display-subsystem: bound 120000.hdmi (ops
> > >>>dw_hdmi_imx_ops)
> > >>>[ 1.373615] Console: switching to colour frame buffer device 128x48
> > >>>[ 1.396495] imx-drm display-subsystem: fb0: frame buffer device
> > >>>[ 1.404620] [drm] Initialized imx-drm 1.0.0 20120507 for
> > >>>display-subsystem on minor 1
> > >>>[ 1.412763] imx-ipuv3 2800000.ipu: IPUv3H probed
> > >>>[ 1.439673] brd: module loaded
> > >>>[ 1.469099] loop: module loaded
> > >>>[ 1.480324] nand: No NAND device found
> > >>>[ 1.487768] libphy: Fixed MDIO Bus: probed
> > >>>[ 1.493034] CAN device driver interface
> > >>>[ 1.499057] fec 2188000.ethernet: 2188000.ethernet supply phy not
> > >>>found, using dummy regulator
> > >>>[ 1.511633] pps pps0: new PPS source ptp0
> > >>>[ 1.516928] fec 2188000.ethernet (unnamed net_device)
> > >>>(uninitialized): Invalid MAC address: 00:00:00:00:00:00
> > >>>[ 1.527177] fec 2188000.ethernet (unnamed net_device)
> > >>>(uninitialized): Using random MAC address: f2:5a:6d:a6:90:74
> > >>>[ 1.543567] libphy: fec_enet_mii_bus: probed
> > >>>[ 1.549138] fec 2188000.ethernet eth0: registered PHC device 0
> > >>>[ 1.556499] usbcore: registered new interface driver asix
> > >>>[ 1.562066] usbcore: registered new interface driver ax88179_178a
> > >>>[ 1.568259] usbcore: registered new interface driver cdc_ether
> > >>>[ 1.574276] usbcore: registered new interface driver net1080
> > >>>[ 1.580097] usbcore: registered new interface driver cdc_subset
> > >>>[ 1.586144] usbcore: registered new interface driver zaurus
> > >>>[ 1.591910] usbcore: registered new interface driver cdc_ncm
> > >>>[ 1.597589] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> > >>>[ 1.604209] ehci-pci: EHCI PCI platform driver
> > >>>[ 1.608760] ehci-mxc: Freescale On-Chip EHCI Host driver
> > >>>[ 1.614851] usbcore: registered new interface driver usb-storage
> > >>>[ 1.629947] ci_hdrc ci_hdrc.0: EHCI Host Controller
> > >>>[ 1.635066] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
> > >>>[ 1.669473] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
> > >>>[ 1.677809] hub 1-0:1.0: USB hub found
> > >>>[ 1.681902] hub 1-0:1.0: 1 port detected
> > >>>[ 1.692839] ci_hdrc ci_hdrc.1: EHCI Host Controller
> > >>>[ 1.697791] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2
> > >>>[ 1.729537] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
> > >>>[ 1.736740] hub 2-0:1.0: USB hub found
> > >>>[ 1.740655] hub 2-0:1.0: 1 port detected
> > >>>[ 1.753468] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered
> > >>>20cc000.snvs:snvs-rtc-lp as rtc0
> > >>>[ 1.762976] i2c /dev entries driver
> > >>>[ 1.811339] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
> > >>>[ 1.817865] Bluetooth: HCI UART driver ver 2.3
> > >>>[ 1.822460] Bluetooth: HCI UART protocol H4 registered
> > >>>[ 1.828297] Bluetooth: HCI UART protocol LL registered
> > >>>[ 1.834774] sdhci: Secure Digital Host Controller Interface driver
> > >>>[ 1.841059] sdhci: Copyright(c) Pierre Ossman
> > >>>[ 1.845437] sdhci-pltfm: SDHCI platform and OF driver helper
> > >>>[ 1.852834] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO
> > >>>[ 1.893497] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc]
> > >>>using ADMA
> > >>>[ 1.937500] mmc1: SDHCI controller on 2198000.usdhc [2198000.usdhc]
> > >>>using ADMA
> > >>>[ 1.945049] mmc0: host does not support reading read-only switch,
> > >>>assuming write-enable
> > >>>[ 1.959799] mmc0: new high speed SDHC card at address 1234
> > >>>[ 1.968363] mmcblk0: mmc0:1234 SA04G 3.71 GiB
> > >>>[ 1.977984] caam 2100000.caam: Entropy delay = 3200
> > >>>[ 2.043796] caam 2100000.caam: Instantiated RNG4 SH0
> > >>>[ 2.104558] caam 2100000.caam: Instantiated RNG4 SH1
> > >>>[ 2.109596] caam 2100000.caam: device ID = 0x0a16010000000000 (Era 4)
> > >>>[ 2.116060] caam 2100000.caam: job rings = 2, qi = 0, dpaa2 = no
> > >>>[ 2.139266] caam algorithms registered in /proc/crypto
> > >>>[ 2.139341] mmcblk0: p1 p2
> > >>>[ 2.150910] caam_jr 2101000.jr0: registering rng-caam
> > >>>[ 2.157327] usbcore: registered new interface driver usbhid
> > >>>[ 2.163103] usbhid: USB HID core driver
> > >>>[ 2.171149] imx-media: subdev ov5640 2-003c bound
> > >>>[ 2.176631] imx-media: subdev ipu1_vdic bound
> > >>>[ 2.181640] imx-media: subdev ipu2_vdic bound
> > >>>[ 2.183831] mmc1: new high speed MMC card at address 0001
> > >>>[ 2.186357] imx-media: subdev ipu1_ic_prp bound
> > >>>[ 2.193649] mmcblk1: mmc1:0001 M62704 3.53 GiB
> > >>>[ 2.197342] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video0
> > >>>[ 2.202620] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB
> > >>>[ 2.208083] imx-media: subdev ipu1_ic_prpenc bound
> > >>>[ 2.215764] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB
> > >>>[ 2.219512] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video1
> > >>>[ 2.231868] imx-media: subdev ipu1_ic_prpvf bound
> > >>>[ 2.232186] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB,
> > >>>chardev (244:0)
> > >>>[ 2.236748] imx-media: subdev ipu2_ic_prp bound
> > >>>[ 2.245958] mmcblk1: p1 p2
> > >>>[ 2.251569] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video2
> > >>>[ 2.258696] imx-media: subdev ipu2_ic_prpenc bound
> > >>>[ 2.264108] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video3
> > >>>[ 2.271119] imx-media: subdev ipu2_ic_prpvf bound
> > >>>[ 2.277042] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video4
> > >>>[ 2.283312] imx-media: subdev ipu1_csi0 bound
> > >>>[ 2.288312] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video5
> > >>>[ 2.294583] imx-media: subdev ipu1_csi1 bound
> > >>>[ 2.299694] ipu2_csi0: Registered ipu2_csi0 capture as /dev/video6
> > >>>[ 2.305902] imx-media: subdev ipu2_csi0 bound
> > >>>[ 2.310953] ipu2_csi1: Registered ipu2_csi1 capture as /dev/video7
> > >>>[ 2.317162] imx-media: subdev ipu2_csi1 bound
> > >>>[ 2.322293] imx-media: subdev imx6-mipi-csi2 bound
> > >>>[ 2.336025] sgtl5000 2-000a: Error reading chip id -6
> > >>>[ 2.346932] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW
> > >>>[ 2.360345] NET: Registered protocol family 10
> > >>>[ 2.367761] Segment Routing with IPv6
> > >>>[ 2.371704] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
> > >>>[ 2.379180] NET: Registered protocol family 17
> > >>>[ 2.383872] can: controller area network core (rev 20170425 abi 9)
> > >>>[ 2.390281] NET: Registered protocol family 29
> > >>>[ 2.394756] can: raw protocol (rev 20170425)
> > >>>[ 2.399126] can: broadcast manager protocol (rev 20170425 t)
> > >>>[ 2.404869] can: netlink gateway (rev 20170425) max_hops=1
> > >>>[ 2.410989] Key type dns_resolver registered
> > >>>[ 2.420041] Registering SWP/SWPB emulation handler
> > >>>[ 2.426337] Loading compiled-in X.509 certificates
> > >>>[ 2.505422] imx-media: subdev ipu1_csi0_mux bound
> > >>>[ 2.511142] imx-media: subdev ipu2_csi1_mux bound
> > >>>[ 2.515930] imx-media: imx6-mipi-csi2:4 -> ipu2_csi1_mux:0
> > >>>[ 2.518384] random: fast init done
> > >>>[ 2.521600] imx-media: imx6-mipi-csi2:1 -> ipu1_csi0_mux:0
> > >>>[ 2.530561] imx-media: ov5640 2-003c:0 -> imx6-mipi-csi2:0
> > >>>[ 2.536094] imx-media: ipu2_csi1:1 -> ipu2_ic_prp:0
> > >>>[ 2.541052] imx-media: ipu2_csi1:1 -> ipu2_vdic:0
> > >>>[ 2.545801] imx-media: ipu2_csi1_mux:2 -> ipu2_csi1:0
> > >>>[ 2.550932] imx-media: ipu2_csi0:1 -> ipu2_ic_prp:0
> > >>>[ 2.555837] imx-media: ipu2_csi0:1 -> ipu2_vdic:0
> > >>>[ 2.560629] imx-media: imx6-mipi-csi2:3 -> ipu2_csi0:0
> > >>>[ 2.565800] imx-media: ipu1_csi1:1 -> ipu1_ic_prp:0
> > >>>[ 2.570750] imx-media: ipu1_csi1:1 -> ipu1_vdic:0
> > >>>[ 2.575497] imx-media: imx6-mipi-csi2:2 -> ipu1_csi1:0
> > >>>[ 2.580716] imx-media: ipu1_csi0:1 -> ipu1_ic_prp:0
> > >>>[ 2.585623] imx-media: ipu1_csi0:1 -> ipu1_vdic:0
> > >>>[ 2.590411] imx-media: ipu1_csi0_mux:2 -> ipu1_csi0:0
> > >>>[ 2.595499] imx-media: ipu2_ic_prp:1 -> ipu2_ic_prpenc:0
> > >>>[ 2.600901] imx-media: ipu2_ic_prp:2 -> ipu2_ic_prpvf:0
> > >>>[ 2.606159] imx-media: ipu1_ic_prp:1 -> ipu1_ic_prpenc:0
> > >>>[ 2.611548] imx-media: ipu1_ic_prp:2 -> ipu1_ic_prpvf:0
> > >>>[ 2.616803] imx-media: ipu2_vdic:2 -> ipu2_ic_prp:0
> > >>>[ 2.621754] imx-media: ipu1_vdic:2 -> ipu1_ic_prp:0
> > >>>[ 2.637015] imx_thermal tempmon: Industrial CPU temperature grade -
> > >>>max:105C critical:100C passive:95C
> > >>>[ 2.650475] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock
> > >>>to 1970-01-01 00:00:00 UTC (0)
> > >>>[ 2.659880] cfg80211: Loading compiled-in X.509 certificates for
> > >>>regulatory database
> > >>>[ 2.674031] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
> > >>>[ 2.682013] platform regulatory.0: Direct firmware load for
> > >>>regulatory.db failed with error -2
> > >>>[ 2.690851] cfg80211: failed to load regulatory.db
> > >>>[ 2.695737] ALSA device list:
> > >>>[ 2.698762] No soundcards found.
> > >>>[ 3.592224] EXT4-fs (mmcblk0p2): recovery complete
> > >>>[ 3.602020] EXT4-fs (mmcblk0p2): mounted filesystem with ordered
> > >>>data mode. Opts: (null)
> > >>>[ 3.610371] VFS: Mounted root (ext4 filesystem) on device 179:2.
> > >>>[ 3.618708] devtmpfs: mounted
> > >>>[ 3.624665] Freeing unused kernel memory: 1024K
> > >>>[ 3.743951] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
> > >>>Starting logging: OK
> > >>>Initializing random number generator... [ 3.897748] random: dd:
> > >>>uninitialized urandom read (512 bytes read)
> > >>>done.
> > >>>Starting network: OK
> > >>>
> > >>>Welcome to Engicam i.CoreM6 Quad/Dual/DualLite/Solo
> > >>>buildroot login: root
> > >>># media-ctl -l "'ov5640 2-003c':0 -> 'imx6-mipi-csi2':0[1]"
> > >>># media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]"
> > >>># media-ctl -l "'ipu1_csi1':1 -> 'ipu1_ic_prp':0[1]"
> > >>># media-ctl -l "'ipu1_ic_prp':1 -> 'ipu1_ic_prpenc':0[1]"
> > >>># media-ctl -l "'ipu1_ic_prpenc':1 -> 'ipu1_ic_prpenc capture':0[1]"
> > >>># media-ctl -V "'ov5640 2-003c':0 [fmt:UYVY2X8/640x480 field:none]"
> > >>># media-ctl -V "'imx6-mipi-csi2':2 [fmt:UYVY2X8/640x480 field:none]"
> > >>># media-ctl -V "'ipu1_csi1':1 [fmt:AYUV32/640x480 field:none]"
> > >>># media-ctl -V "'ipu1_ic_prp':1 [fmt:AYUV32/640x480 field:none]"
> > >>># media-ctl -V "'ipu1_ic_prpenc':1 [fmt:AYUV32/640x480 field:none]"
> > >>># med# media-ctl -p
> > >>>Media controller API version 4.17.0
> > >>>
> > >>>Media device information
> > >>>------------------------
> > >>>driver imx-media
> > >>>model imx-media
> > >>>serial
> > >>>bus info
> > >>>hw revision 0x0
> > >>>driver version 4.17.0
> > >>>
> > >>>Device topology
> > >>>- entity 1: ov5640 2-003c (1 pad, 1 link)
> > >>> type V4L2 subdev subtype Sensor flags 0
> > >>> device node name /dev/v4l-subdev0
> > >>>pad0: Source
> > >>>[fmt:UYVY8_2X8/640x480 field:none]
> > >>>-> "imx6-mipi-csi2":0 [ENABLED]
> > >>>
> > >>>- entity 3: ipu1_vdic (3 pads, 3 links)
> > >>> type V4L2 subdev subtype Unknown flags 0
> > >>> device node name /dev/v4l-subdev1
> > >>>pad0: Sink
> > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > >>><- "ipu1_csi0":1 []
> > >>><- "ipu1_csi1":1 []
> > >>>pad1: Sink
> > >>>[fmt:UYVY8_2X8/640x480 field:none]
> > >>>pad2: Source
> > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > >>>-> "ipu1_ic_prp":0 []
> > >>>
> > >>>- entity 7: ipu2_vdic (3 pads, 3 links)
> > >>> type V4L2 subdev subtype Unknown flags 0
> > >>> device node name /dev/v4l-subdev2
> > >>>pad0: Sink
> > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > >>><- "ipu2_csi0":1 []
> > >>><- "ipu2_csi1":1 []
> > >>>pad1: Sink
> > >>>[fmt:UYVY8_2X8/640x480 field:none]
> > >>>pad2: Source
> > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > >>>-> "ipu2_ic_prp":0 []
> > >>>
> > >>>- entity 11: ipu1_ic_prp (3 pads, 5 links)
> > >>> type V4L2 subdev subtype Unknown flags 0
> > >>> device node name /dev/v4l-subdev3
> > >>>pad0: Sink
> > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > >>><- "ipu1_vdic":2 []
> > >>><- "ipu1_csi0":1 []
> > >>><- "ipu1_csi1":1 [ENABLED]
> > >>>pad1: Source
> > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > >>>-> "ipu1_ic_prpenc":0 [ENABLED]
> > >>>pad2: Source
> > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > >>>-> "ipu1_ic_prpvf":0 []
> > >>>
> > >>>- entity 15: ipu1_ic_prpenc (2 pads, 2 links)
> > >>> type V4L2 subdev subtype Unknown flags 0
> > >>> device node name /dev/v4l-subdev4
> > >>>pad0: Sink
> > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > >>><- "ipu1_ic_prp":1 [ENABLED]
> > >>>pad1: Source
> > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > >>>-> "ipu1_ic_prpenc capture":0 [ENABLED]
> > >>>
> > >>>- entity 18: ipu1_ic_prpenc capture (1 pad, 1 link)
> > >>> type Node subtype V4L flags 0
> > >>> device node name /dev/video0
> > >>>pad0: Sink
> > >>><- "ipu1_ic_prpenc":1 [ENABLED]
> > >>>
> > >>>- entity 24: ipu1_ic_prpvf (2 pads, 2 links)
> > >>> type V4L2 subdev subtype Unknown flags 0
> > >>> device node name /dev/v4l-subdev5
> > >>>pad0: Sink
> > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > >>><- "ipu1_ic_prp":2 []
> > >>>pad1: Source
> > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > >>>-> "ipu1_ic_prpvf capture":0 []
> > >>>
> > >>>- entity 27: ipu1_ic_prpvf capture (1 pad, 1 link)
> > >>> type Node subtype V4L flags 0
> > >>> device node name /dev/video1
> > >>>pad0: Sink
> > >>><- "ipu1_ic_prpvf":1 []
> > >>>
> > >>>- entity 33: ipu2_ic_prp (3 pads, 5 links)
> > >>> type V4L2 subdev subtype Unknown flags 0
> > >>> device node name /dev/v4l-subdev6
> > >>>pad0: Sink
> > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > >>><- "ipu2_vdic":2 []
> > >>><- "ipu2_csi0":1 []
> > >>><- "ipu2_csi1":1 []
> > >>>pad1: Source
> > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > >>>-> "ipu2_ic_prpenc":0 []
> > >>>pad2: Source
> > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > >>>-> "ipu2_ic_prpvf":0 []
> > >>>
> > >>>- entity 37: ipu2_ic_prpenc (2 pads, 2 links)
> > >>> type V4L2 subdev subtype Unknown flags 0
> > >>> device node name /dev/v4l-subdev7
> > >>>pad0: Sink
> > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > >>><- "ipu2_ic_prp":1 []
> > >>>pad1: Source
> > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > >>>-> "ipu2_ic_prpenc capture":0 []
> > >>>
> > >>>- entity 40: ipu2_ic_prpenc capture (1 pad, 1 link)
> > >>> type Node subtype V4L flags 0
> > >>> device node name /dev/video2
> > >>>pad0: Sink
> > >>><- "ipu2_ic_prpenc":1 []
> > >>>
> > >>>- entity 46: ipu2_ic_prpvf (2 pads, 2 links)
> > >>> type V4L2 subdev subtype Unknown flags 0
> > >>> device node name /dev/v4l-subdev8
> > >>>pad0: Sink
> > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > >>><- "ipu2_ic_prp":2 []
> > >>>pad1: Source
> > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > >>>-> "ipu2_ic_prpvf capture":0 []
> > >>>
> > >>>- entity 49: ipu2_ic_prpvf capture (1 pad, 1 link)
> > >>> type Node subtype V4L flags 0
> > >>> device node name /dev/video3
> > >>>pad0: Sink
> > >>><- "ipu2_ic_prpvf":1 []
> > >>>
> > >>>- entity 55: ipu1_csi0 (3 pads, 4 links)
> > >>> type V4L2 subdev subtype Unknown flags 0
> > >>> device node name /dev/v4l-subdev9
> > >>>pad0: Sink
> > >>>[fmt:UYVY8_2X8/640x480 field:none
> > >>>crop.bounds:(0,0)/640x480
> > >>>crop:(0,0)/640x480
> > >>>compose.bounds:(0,0)/640x480
> > >>>compose:(0,0)/640x480]
> > >>><- "ipu1_csi0_mux":2 []
> > >>>pad1: Source
> > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > >>>-> "ipu1_ic_prp":0 []
> > >>>-> "ipu1_vdic":0 []
> > >>>pad2: Source
> > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > >>>-> "ipu1_csi0 capture":0 []
> > >>>
> > >>>- entity 59: ipu1_csi0 capture (1 pad, 1 link)
> > >>> type Node subtype V4L flags 0
> > >>> device node name /dev/video4
> > >>>pad0: Sink
> > >>><- "ipu1_csi0":2 []
> > >>>
> > >>>- entity 65: ipu1_csi1 (3 pads, 4 links)
> > >>> type V4L2 subdev subtype Unknown flags 0
> > >>> device node name /dev/v4l-subdev10
> > >>>pad0: Sink
> > >>>[fmt:UYVY8_2X8/640x480 field:none
> > >>>crop.bounds:(0,0)/640x480
> > >>>crop:(0,0)/640x480
> > >>>compose.bounds:(0,0)/640x480
> > >>>compose:(0,0)/640x480]
> > >>><- "imx6-mipi-csi2":2 [ENABLED]
> > >>>pad1: Source
> > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > >>>-> "ipu1_ic_prp":0 [ENABLED]
> > >>>-> "ipu1_vdic":0 []
> > >>>pad2: Source
> > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > >>>-> "ipu1_csi1 capture":0 []
> > >>>
> > >>>- entity 69: ipu1_csi1 capture (1 pad, 1 link)
> > >>> type Node subtype V4L flags 0
> > >>> device node name /dev/video5
> > >>>pad0: Sink
> > >>><- "ipu1_csi1":2 []
> > >>>
> > >>>- entity 75: ipu2_csi0 (3 pads, 4 links)
> > >>> type V4L2 subdev subtype Unknown flags 0
> > >>> device node name /dev/v4l-subdev11
> > >>>pad0: Sink
> > >>>[fmt:UYVY8_2X8/640x480 field:none
> > >>>crop.bounds:(0,0)/640x480
> > >>>crop:(0,0)/640x480
> > >>>compose.bounds:(0,0)/640x480
> > >>>compose:(0,0)/640x480]
> > >>><- "imx6-mipi-csi2":3 []
> > >>>pad1: Source
> > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > >>>-> "ipu2_ic_prp":0 []
> > >>>-> "ipu2_vdic":0 []
> > >>>pad2: Source
> > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > >>>-> "ipu2_csi0 capture":0 []
> > >>>
> > >>>- entity 79: ipu2_csi0 capture (1 pad, 1 link)
> > >>> type Node subtype V4L flags 0
> > >>> device node name /dev/video6
> > >>>pad0: Sink
> > >>><- "ipu2_csi0":2 []
> > >>>
> > >>>- entity 85: ipu2_csi1 (3 pads, 4 links)
> > >>> type V4L2 subdev subtype Unknown flags 0
> > >>> device node name /dev/v4l-subdev12
> > >>>pad0: Sink
> > >>>[fmt:UYVY8_2X8/640x480 field:none
> > >>>crop.bounds:(0,0)/640x480
> > >>>crop:(0,0)/640x480
> > >>>compose.bounds:(0,0)/640x480
> > >>>compose:(0,0)/640x480]
> > >>><- "ipu2_csi1_mux":2 []
> > >>>pad1: Source
> > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > >>>-> "ipu2_ic_prp":0 []
> > >>>-> "ipu2_vdic":0 []
> > >>>pad2: Source
> > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > >>>-> "ipu2_csi1 capture":0 []
> > >>>
> > >>>- entity 89: ipu2_csi1 capture (1 pad, 1 link)
> > >>> type Node subtype V4L flags 0
> > >>> device node name /dev/video7
> > >>>pad0: Sink
> > >>><- "ipu2_csi1":2 []
> > >>>
> > >>>- entity 95: imx6-mipi-csi2 (5 pads, 5 links)
> > >>> type V4L2 subdev subtype Unknown flags 0
> > >>> device node name /dev/v4l-subdev13
> > >>>pad0: Sink
> > >>>[fmt:UYVY8_2X8/640x480 field:none]
> > >>><- "ov5640 2-003c":0 [ENABLED]
> > >>>pad1: Source
> > >>>[fmt:UYVY8_2X8/640x480 field:none]
> > >>>-> "ipu1_csi0_mux":0 []
> > >>>pad2: Source
> > >>>[fmt:UYVY8_2X8/640x480 field:none]
> > >>>-> "ipu1_csi1":0 [ENABLED]
> > >>>pad3: Source
> > >>>[fmt:UYVY8_2X8/640x480 field:none]
> > >>>-> "ipu2_csi0":0 []
> > >>>pad4: Source
> > >>>[fmt:UYVY8_2X8/640x480 field:none]
> > >>>-> "ipu2_csi1_mux":0 []
> > >>>
> > >>>- entity 101: ipu1_csi0_mux (3 pads, 2 links)
> > >>> type V4L2 subdev subtype Unknown flags 0
> > >>> device node name /dev/v4l-subdev14
> > >>>pad0: Sink
> > >>>[fmt:unknown/0x0]
> > >>><- "imx6-mipi-csi2":1 []
> > >>>pad1: Sink
> > >>>[fmt:unknown/0x0]
> > >>>pad2: Source
> > >>>[fmt:unknown/0x0]
> > >>>-> "ipu1_csi0":0 []
> > >>>
> > >>>- entity 105: ipu2_csi1_mux (3 pads, 2 links)
> > >>> type V4L2 subdev subtype Unknown flags 0
> > >>> device node name /dev/v4l-subdev15
> > >>>pad0: Sink
> > >>>[fmt:unknown/0x0]
> > >>><- "imx6-mipi-csi2":4 []
> > >>>pad1: Sink
> > >>>[fmt:unknown/0x0]
> > >>>pad2: Source
> > >>>[fmt:unknown/0x0]
> > >>>-> "ipu2_csi1":0 []
> > >>>
> > >>># GST_DEBUG="v4l2*:5" gst-launch-1.0 -v v4l2src device=/dev/video1 ! \
> > >>>>autovideosink
> > >>>0:00:01.086281666 185 0x1dce880 DEBUG v4l2
> > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l1
> > >>>0:00:01.087369666 185 0x1dce880 DEBUG v4l2
> > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l5
> > >>>0:00:01.088496000 185 0x1dce880 DEBUG v4l2
> > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l.
> > >>>0:00:01.089540333 185 0x1dce880 DEBUG v4l2
> > >>>gstv4l2object.c:1487:gst_v4l2_object_v4lR
> > >>>0:00:01.090494666 185 0x1dce880 DEBUG v4l2
> > >>>gstv4l2object.c:1487:gst_v4l2_object_v4lH
> > >>>0:00:01.091657666 185 0x1dce880 DEBUG v4l2
> > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l4
> > >>>0:00:01.092745000 185 0x1dce880 DEBUG v4l2
> > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l
> > >>>0:00:01.093703333 185 0x1dce880 DEBUG v4l2
> > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l
> > >>>0:00:01.094854000 185 0x1dce880 DEBUG v4l2
> > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l
> > >>>0:00:01.095815000 185 0x1dce880 DEBUG v4l2
> > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l
> > >>>0:00:01.096818666 185 0x1dce880 DEBUG v4l2
> > >>>gstv4l2object.c:1487:gst_v4l2_object_v4lB
> > >>>0:00:01.097819000 185 0x1dce880 DEBUG v4l2
> > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l8
> > >>>0:00:01.098771000 185 0x1dce880 DEBUG v4l2
> > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l
> > >>>0:00:01.099798666 185 0x1dce880 DEBUG v4l2
> > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l1
> > >>>0:00:01.100776666 185 0x1dce880 DEBUG v4l2
> > >>>gstv4l2object.c:1487:gst_v4l2_object_v4lV
> > >>>0:00:01.101755333 185 0x1dce880 DEBUG v4l2
> > >>>gstv4l2object.c:1487:gst_v4l2_object_v4lY
> > >>>0:00:01.102771666 185 0x1dce880 DEBUG v4l2
> > >>>gstv4l2object.c:1487:gst_v4l2_object_v4lP
> > >>>0:00:01.103712000 185 0x1dce880 DEBUG v4l2
> > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l4
> > >>>0:00:01.104720000 185 0x1dce880 DEBUG v4l2
> > >>>gstv4l2object.c:1487:gst_v4l2_object_v4lO
> > >>>0:00:01.105697000 185 0x1dce880 DEBUG v4l2
> > >>>gstv4l2object.c:1487:gst_v4l2_object_v4lP
> > >>>0:00:01.106629666 185 0x1dce880 DEBUG v4l2
> > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l4
> > >>>0:00:01.107681666 185 0x1dce880 DEBUG v4l2
> > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l4
> > >>>0:00:01.108660666 185 0x1dce880 DEBUG v4l2
> > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l2
> > >>>0:00:01.442437333 185 0x1dce880 DEBUG v4l2
> > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l0
> > >>>0:00:01.444673333 185 0x1dce880 DEBUG v4l2
> > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l2
> > >>>0:00:01.446842000 185 0x1dce880 DEBUG v4l2
> > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l2
> > >>>0:00:01.449084000 185 0x1dce880 DEBUG v4l2
> > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l4
> > >>>Setting pipeline to PAUSED ...
> > >>>0:00:01.680823000 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:524:gst_v4l2_open:<v4l2src01
> > >>>0:00:01.681953333 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:69:gst_v4l2_get_capabilities
> > >>>0:00:01.683098666 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:140:gst_v4l2_fill_lists:<v4s
> > >>>0:00:01.684056666 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:143:gst_v4l2_fill_lists:<v4s
> > >>>0:00:01.685201000 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:215:gst_v4l2_fill_lists:<v4s
> > >>>0:00:01.686159333 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > >>>0:00:01.687207666 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4C
> > >>>0:00:01.688183666 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > >>>0:00:01.689155333 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4M
> > >>>0:00:01.690142000 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > >>>0:00:01.691114000 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4P
> > >>>0:00:01.692080000 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > >>>0:00:01.693073000 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4R
> > >>>0:00:01.694043000 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > >>>0:00:01.695760000 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4L
> > >>>0:00:01.696736333 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > >>>0:00:01.697708000 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4G
> > >>>0:00:01.698699000 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > >>>0:00:01.699667000 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4H
> > >>>0:00:01.700633000 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > >>>0:00:01.701623666 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4I
> > >>>0:00:01.702591000 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > >>>0:00:01.703554333 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4K
> > >>>0:00:01.704604000 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > >>>0:00:01.705576666 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4M
> > >>>0:00:01.706567000 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > >>>0:00:02.040204667 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4B
> > >>>0:00:02.042194667 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > >>>0:00:02.044190000 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4G
> > >>>0:00:02.046338333 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > >>>0:00:02.048327667 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4H
> > >>>0:00:02.050296000 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > >>>0:00:02.052385000 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4K
> > >>>0:00:02.054376000 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > >>>0:00:02.056461333 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4L
> > >>>0:00:02.058434000 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > >>>0:00:02.060423667 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4c
> > >>>0:00:02.062382667 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:263:gst_v4l2_fill_lists:<v4s
> > >>>0:00:02.064291333 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:283:gst_v4l2_fill_lists:<v40
> > >>>0:00:02.066224667 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:292:gst_v4l2_fill_lists:<v4.
> > >>>0:00:02.067190333 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:283:gst_v4l2_fill_lists:<v40
> > >>>0:00:02.068174333 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:300:gst_v4l2_fill_lists:<v40
> > >>>0:00:02.069141000 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:283:gst_v4l2_fill_lists:<v40
> > >>>0:00:02.070113000 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:305:gst_v4l2_fill_lists:<v4d
> > >>>0:00:02.071088333 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:456:gst_v4l2_fill_lists:<v4e
> > >>>0:00:02.072040000 185 0x1dce880 INFO v4l2
> > >>>v4l2_calls.c:592:gst_v4l2_open:<v4l2src0y
> > >>>0:00:02.073017333 185 0x1dce880 DEBUG v4l2
> > >>>gstv4l2object.c:804:gst_v4l2_set_default)
> > >>>0:00:02.074010667 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:740:gst_v4l2_get_norm:<v4l2m
> > >>>0:00:02.075021000 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:754:gst_v4l2_get_norm: Fail1
> > >>>0:00:02.076012000 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:1027:gst_v4l2_get_input:<v4t
> > >>>Pipeline is live and does not need PREROLL ...
> > >>>0:00:02.080105333 185 0x1ec39b0 DEBUG v4l2
> > >>>gstv4l2object.c:1109:gst_v4l2_object_fil.
> > >>><v4l2src0> getting src format enumerations
> > >>>0:00:02.412981333 185 0x1ec39b0 INFO New clock: GstSystemClock
> > >>> v4l2 gstv4l2object.c:1146:gst_v4l2_object_fill_format_list:<v4l2src0>
> > >>>got 7 format(s):
> > >>>0:00:02.415407667 185 0x1ec39b0 INFO v4l2
> > >>>gstv4l2object.c:1152:gst_v4l2_object_filV
> > >>>0:00:02.417531667 185 0x1ec39b0 INFO v4l2
> > >>>gstv4l2object.c:1152:gst_v4l2_object_filY
> > >>>0:00:02.419703667 185 0x1ec39b0 INFO v4l2
> > >>>gstv4l2object.c:1152:gst_v4l2_object_filP
> > >>>0:00:02.421860000 185 0x1ec39b0 INFO v4l2
> > >>>gstv4l2object.c:1152:gst_v4l2_object_fil2
> > >>>0:00:02.424022667 185 0x1ec39b0 INFO v4l2
> > >>>gstv4l2object.c:1152:gst_v4l2_object_fil2
> > >>>0:00:02.426295000 185 0x1ec39b0 INFO v4l2
> > >>>gstv4l2object.c:1152:gst_v4l2_object_fil6
> > >>>0:00:02.428481333 185 0x1ec39b0 INFO v4l2
> > >>>gstv4l2object.c:1152:gst_v4l2_object_fil2
> > >>>0:00:02.430728333 185 0x1ec39b0 DEBUG v4l2
> > >>>gstv4l2object.c:2564:gst_v4l2_object_proV
> > >>>0:00:02.432985333 185 0x1ec39b0 DEBUG v4l2
> > >>>gstv4l2object.c:2691:gst_v4l2_object_pro)
> > >>>0:00:02.436117000 185 0x1ec39b0 DEBUG v4l2
> > >>>gstv4l2object.c:2564:gst_v4l2_object_proY
> > >>>0:00:02.437252333 185 0x1ec39b0 DEBUG v4l2
> > >>>gstv4l2object.c:2691:gst_v4l2_object_pro)
> > >>>0:00:02.438579000 185 0x1ec39b0 DEBUG v4l2
> > >>>gstv4l2object.c:2564:gst_v4l2_object_proP
> > >>>0:00:02.439656000 185 0x1ec39b0 DEBUG v4l2
> > >>>gstv4l2object.c:2691:gst_v4l2_object_pro)
> > >>>0:00:02.441016667 185 0x1ec39b0 DEBUG v4l2
> > >>>gstv4l2object.c:2564:gst_v4l2_object_pro2
> > >>>0:00:02.442092333 185 0x1ec39b0 DEBUG v4l2
> > >>>gstv4l2object.c:2691:gst_v4l2_object_pro)
> > >>>0:00:02.443443333 185 0x1ec39b0 DEBUG v4l2
> > >>>gstv4l2object.c:2564:gst_v4l2_object_pro2
> > >>>0:00:02.444626667 185 0x1ec39b0 DEBUG v4l2
> > >>>gstv4l2object.c:2691:gst_v4l2_object_pro)
> > >>>0:00:02.445990667 185 0x1ec39b0 DEBUG v4l2
> > >>>gstv4l2object.c:2564:gst_v4l2_object_pro6
> > >>>0:00:02.447063667 185 0x1ec39b0 DEBUG v4l2
> > >>>gstv4l2object.c:2691:gst_v4l2_object_pro)
> > >>>0:00:02.448410333 185 0x1ec39b0 DEBUG v4l2
> > >>>gstv4l2object.c:2564:gst_v4l2_object_pro2
> > >>>0:00:02.782148333 185 0x1ec39b0 DEBUG v4l2
> > >>>gstv4l2object.c:2691:gst_v4l2_object_pro)
> > >>>0:00:02.785264333 185 0x1ec39b0 INFO v4l2
> > >>>gstv4l2object.c:3967:gst_v4l2_object_get}
> > >>>0:00:02.788800000 185 0x1ec39b0 DEBUG v4l2src
> > >>>gstv4l2src.c:300:gst_v4l2src_negotiate:<}
> > >>>0:00:02.792207000 185 0x1ec39b0 DEBUG v4l2src
> > >>>gstv4l2src.c:308:gst_v4l2src_negotiate:<]
> > >>>0:00:02.795419000 185 0x1ec39b0 DEBUG v4l2src
> > >>>gstv4l2src.c:316:gst_v4l2src_negotiate:<}
> > >>>0:00:03.132052667 185 0x1ec39b0 DEBUG v4l2src
> > >>>gstv4l2src.c:256:gst_v4l2src_fixate:<v4l}
> > >>>0:00:03.134399667 185 0x1ec39b0 DEBUG v4l2src
> > >>>gstv4l2src.c:282:gst_v4l2src_fixate:<v4l}
> > >>>0:00:03.136800667 185 0x1ec39b0 DEBUG v4l2src
> > >>>gstv4l2src.c:367:gst_v4l2src_negotiate:<1
> > >>>0:00:03.139067333 185 0x1ec39b0 DEBUG v4l2
> > >>>gstv4l2object.c:3887:gst_v4l2_object_stog
> > >>>0:00:03.141452000 185 0x1ec39b0 DEBUG v4l2
> > >>>gstv4l2object.c:3176:gst_v4l2_object_seto
> > >>>0:00:03.143608667 185 0x1ec39b0 DEBUG v4l2
> > >>>gstv4l2object.c:3310:gst_v4l2_object_set0
> > >>>0:00:03.146025333 185 0x1ec39b0 DEBUG v4l2
> > >>>gstv4l2object.c:3361:gst_v4l2_object_set1
> > >>>0:00:03.148229000 185 0x1ec39b0 DEBUG v4l2
> > >>>gstv4l2object.c:3370:gst_v4l2_object_set0
> > >>>0:00:03.150373667 185 0x1ec39b0 DEBUG v4l2
> > >>>gstv4l2object.c:3404:gst_v4l2_object_set1
> > >>>0:00:03.152589667 185 0x1ec39b0 DEBUG v4l2
> > >>>gstv4l2object.c:3414:gst_v4l2_object_set0
> > >>>0:00:03.155250667 185 0x1ec39b0 DEBUG v4l2
> > >>>gstv4l2object.c:3455:gst_v4l2_object_set1
> > >>>0:00:03.156584667 185 0x1ec39b0 DEBUG v4l2
> > >>>gstv4l2object.c:3472:gst_v4l2_object_set1
> > >>>0:00:03.157659333 185 0x1ec39b0 INFO v4l2
> > >>>gstv4l2object.c:3504:gst_v4l2_object_set1
> > >>>0:00:03.491432000 185 0x1ec39b0 DEBUG v4l2
> > >>>gstv4l2object.c:2960:gst_v4l2_object_ext0
> > >>>0:00:03.493645333 185 0x1ec39b0 DEBUG v4l2
> > >>>gstv4l2object.c:3071:gst_v4l2_object_sav0
> > >>>0:00:03.496027333 185 0x1ec39b0 DEBUG v4l2
> > >>>gstv4l2object.c:2843:gst_v4l2_object_setm
> > >>>0:00:03.498180000 185 0x1ec39b0 INFO v4l2
> > >>>gstv4l2object.c:2867:gst_v4l2_object_set2
> > >>>0:00:03.502772000 185 0x1ec39b0 DEBUG v4l2bufferpool
> > >>>gstv4l2bufferpool.c:509:gst_v4l2_buffer_;
> > >>>0:00:03.505283333 185 0x1ec39b0 INFO v4l2bufferpool
> > >>>gstv4l2bufferpool.c:557:gst_v4l2_buffer_2
> > >>>0:00:03.507120000 185 0x1ec39b0 INFO v4l2bufferpool
> > >>>gstv4l2bufferpool.c:570:gst_v4l2_buffer_2
> > >>>/GstPipeline:pipeline0/GstV4l2Src:v4l2src0.GstPad:src: caps =
> > >>>video/x-raw, format=(string)YUY2, width=(i1
> > >>>/GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0.GstGhostPad:sink.GstProxyPad:proxypad0:
> > >>>caps = vi1
> > >>>/GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0/GstKMSSink:autovideosink0-actual-sink-kms.GstPad:1
> > >>>0:00:03/GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0.GstGhostPad:sink:
> > >>>caps = video/x-raw, form1
> > >>>.512440000 185 0x1ec39b0 DEBUG v4l2
> > >>>gstv4l2object.c:3985:gst_v4l2_object_decide_alln
> > >>>0:00:03.513556667 185 0x1ec39b0 DEBUG v4l2
> > >>>gstv4l2object.c:4011:gst_v4l2_object_dec>
> > >>>0:00:03.514745667 185 0x1ec39b0 DEBUG v4l2
> > >>>gstv4l2object.c:4069:gst_v4l2_object_dec>
> > >>>0:00:03.515889000 185 0x1ec39b0 DEBUG v4l2
> > >>>gstv4l2object.c:4134:gst_v4l2_object_deca
> > >>>0:00:03.516969667 185 0x1ec39b0 DEBUG v4l2
> > >>>gstv4l2object.c:4143:gst_v4l2_object_dec;
> > >>>0:00:03.851350333 185 0x1ec39b0 DEBUG v4l2bufferpool
> > >>>gstv4l2bufferpool.c:509:gst_v4l2_buffer_2
> > >>>ams)NULL, options=(string)< GstBufferPoolOptionVideoMeta >;
> > >>>0:00:03.853620333 185 0x1ec39b0 INFO v4l2bufferpool
> > >>>gstv4l2bufferpool.c:570:gst_v4l2_buffer_2
> > >>>0:00:03.855780667 185 0x1ec39b0 DEBUG v4l2
> > >>>gstv4l2object.c:4150:gst_v4l2_object_dec;
> > >>>0:00:03.858430000 185 0x1ec39b0 DEBUG v4l2bufferpool
> > >>>gstv4l2bufferpool.c:509:gst_v4l2_buffer_;
> > >>>0:00:03.861572333 185 0x1ec39b0 DEBUG v4l2bufferpool
> > >>>gstv4l2bufferpool.c:707:gst_v4l2_buffer_l
> > >>>0:00:03.863468333 185 0x1ec39b0 DEBUG v4l2bufferpool
> > >>>gstv4l2bufferpool.c:737:gst_v4l2_buffer_s
> > >>>0:00:03.918861000 185 0x1ec39b0 DEBUG v4l2allocator
> > >>>gstv4l2allocator.c:706:gst_v4l2_allocatod
> > >>>0:00:03.943783333 185 0x1ec39b0 DEBUG v4l2bufferpool
> > >>>gstv4l2bufferpool.c:1389:gst_v4l2_buffer8
> > >>>0:00:03.946129333 185 0x1ec39b0 DEBUG v4l2bufferpool
> > >>>gstv4l2bufferpool.c:1389:gst_v4l2_buffer8
> > >>>0:00:03.948065000 185 0x1ec39b0 DEBUG v4l2bufferpool
> > >>>gstv4l2bufferpool.c:1389:gst_v4l2_buffer8
> > >>>0:00:03.950006000 185 0x1ec39b0 DEBUG v4l2bufferpool
> > >>>gstv4l2bufferpool.c:952:gst_v4l2_buffer_g
> > >>>0:00:03.996241333 185 0x1ec39b0 ERROR v4l2bufferpool
> > >>>gstv4l2bufferpool.c:641:gst_v4l2_buffer_)
> > >>>0:00:03.998199667 185 0x1ec39b0 DEBUG v4l2bufferpool
> > >>>gstv4l2bufferpool.c:1311:gst_v4l2_buffere
> > >>>0:00:04.000463000 185 0x1ec39b0 WARN v4l2bufferpool
> > >>>gstv4l2bufferpool.c:1064:gst_v4l2_buffer)
> > >>>0:00:04.004649333 185 0x1ec39b0 DEBUG v4l2bufferpool
> > >>>gstv4l2bufferpool.c:1283:gst_v4l2_bufferr
> > >>>0:00:04.005853333 185 0x1ec39b0 WARN v4l2src
> > >>>gstv4l2src.c:866:gst_v4l2src_create:<v4lr
> > >>>ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Could
> > >>>not read from resource.
> > >>>Additional debug info:
> > >>>gstv4l2bufferpool.c(1064): gst_v4l2_buffer_pool_poll ():
> > >>>/GstPipeline:pipeline0/GstV4l2Src:v4l2src0:
> > >>>poll error 1: Resource temporarily unavailable (11)
> > >>>Execution ended after 0:00:01.606871334
> > >>>Setting pipeline to PAUSED ...
> > >>>0:00:04.022385000 185 0x1dce880 DEBUG v4l2bufferpool
> > >>>gstv4l2bufferpool.c:931:gst_v4l2_buffer_g
> > >>>Setting pipeline to READY ...
> > >>>0:00:04.024850667 185 0x1dce880 DEBUG v4l2bufferpool
> > >>>gstv4l2bufferpool.c:879:gst_v4l2_buffer_l
> > >>>0:00:04.026764000 185 0x1dce880 DEBUG v4l2allocator
> > >>>gstv4l2allocator.c:757:gst_v4l2_allocator
> > >>>0:00:04.028598333 185 0x1dce880 DEBUG v4l2allocator
> > >>>gstv4l2allocator.c:765:gst_v4l2_allocatoe
> > >>>0:00:04.362785667 185 0x1dce880 WARN v4l2bufferpool
> > >>>gstv4l2bufferpool.c:918:gst_v4l2_buffer_g
> > >>>0:00:04.364712333 185 0x1dce880 DEBUG v4l2bufferpool
> > >>>gstv4l2bufferpool.c:952:gst_v4l2_buffer_g
> > >>>0:00:04.366504333 185 0x1dce880 DEBUG v4l2bufferpool
> > >>>gstv4l2bufferpool.c:629:gst_v4l2_buffer_g
> > >>>0:00:04.368607000 185 0x1dce880 DEBUG v4l2
> > >>>gstv4l2object.c:3887:gst_v4l2_object_stog
> > >>>0:00:04.370713333 185 0x1dce880 DEBUG v4l2
> > >>>gstv4l2object.c:3895:gst_v4l2_object_stol
> > >>>0:00:04.372809333 185 0x1dce880 DEBUG v4l2bufferpool
> > >>>gstv4l2bufferpool.c:931:gst_v4l2_buffer_g
> > >>>0:00:04.374732000 185 0x1dce880 DEBUG v4l2bufferpool
> > >>>gstv4l2bufferpool.c:879:gst_v4l2_buffer_l
> > >>>0:00:04.376541000 185 0x1dce880 DEBUG v4l2bufferpool
> > >>>gstv4l2bufferpool.c:663:gst_v4l2_buffer_g
> > >>>0:00:04.378334000 185 0x1dce880 DEBUG v4l2allocator
> > >>>gstv4l2allocator.c:757:gst_v4l2_allocator
> > >>>Setting pipeline to NULL ...
> > >>>0:00:04.394764333 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:716:gst_v4l2_close:<v4l2src1
> > >>>0:00:04.395897667 185 0x1dce880 DEBUG v4l2
> > >>>v4l2_calls.c:464:gst_v4l2_empty_lists:<vs
> > >>>Freeing pipeline ...
> > >>>
> > >>>[1] https://linuxtv.org/downloads/v4l-dvb-apis/v4l-drivers/imx.html#sabresd-with-mipi-csi-2-ov5640
> > >>>[2] https://paste.ubuntu.com/p/CTvFqdbyMW/
> > >>>
> > >>>Jagan.
> > >>>
> > >>>--
> > >>>Jagan Teki
> > >>>Senior Linux Kernel Engineer | Amarula Solutions
> > >>>U-Boot, Linux | Upstream Maintainer
> > >>>Hyderabad, India.
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
2018-10-19 13:45 ` Adam Ford
@ 2018-10-19 19:42 ` Adam Ford
2018-10-22 11:33 ` jacopo mondi
0 siblings, 1 reply; 38+ messages in thread
From: Adam Ford @ 2018-10-19 19:42 UTC (permalink / raw)
To: jacopo
Cc: steve_longerbeam, Jagan Teki, p.zabel, Fabio Estevam,
gstreamer-devel, linux-media, Linux Kernel Mailing List
On Fri, Oct 19, 2018 at 8:45 AM Adam Ford <aford173@gmail.com> wrote:
>
> On Wed, Oct 17, 2018 at 3:01 AM jacopo mondi <jacopo@jmondi.org> wrote:
> >
> > Hi Adam, Seve,
> >
> > On Tue, Oct 16, 2018 at 05:13:24PM -0700, Steve Longerbeam wrote:
> > > Hi Adam,
> > >
> > >
> > > On 10/16/18 12:46 PM, Adam Ford wrote:
> > > >On Thu, Sep 20, 2018 at 9:58 AM jacopo mondi <jacopo@jmondi.org> wrote:
> > > >>Hi imx6 people,
> > > >>
> > > >>On Thu, May 31, 2018 at 08:39:20PM +0530, Jagan Teki wrote:
> > > >>>Hi All,
> > > >>>
> > > >>>I'm trying to verify MIPI-CSI2 OV5640 camera on i.MX6 platform with
> > > >>>Mainline Linux.
> > > >>Sorry to resurect this, but before diving deep into details, do anyone
> > > >>of you verified JPEG capture with ov5640 and i.MX6 platforms, and has
> > > >>maybe a pipeline configuration to share :) ?
> > > >
> > > >I have a 4.14 kernel for my i.MX6D/Q using an ov5640 connected in a
> > > >similar way as the sabresd and I'm getting similar timeouts.
> > > >when executing
> > > >
> > > >media-ctl -l "'ov5640 2-0010':0 -> 'imx6-mipi-csi2':0[1]"
> > > >media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]"
> > >
> > >
> > > You're routing through imx6-mipi-csi2 pad 2, which is CSI-2 virtual
> > > channel 1, so make sure the ov5640 is transmitting on that channel,
> > > see virtual_channel module parameter.
>
> First, I want to apologize for the spam. I don't normally want to ask
> for hand-holding, but after spending 4 solid days on this, I'm getting
> frustrated, and I've tried to read the instructions, and the technical
> reference manual is huge and somewhat overwhelming.
>
> Once I get my hardware working and I develop a better understanding of
> how this system works, I'll be more than happy to volunteer to help
> test patches on my hardware.
>
> I am not sure I fully understand how the media-ctl handles the
> routing. I just basically copied what I could find from some
> documentation. I looked for some documentation but I wasn't able to
> find much. Maybe you can point me to some.
>
> I can share with you some of my device tree, and I'll try to explain
> my connections. Firstly, I have an i.MX6Q and i.MX6Q which share the
> same device tree.
>
> The CSI pins on the OV5640 camera go to i.MX6 pins:
> CSI_CLK0M / CSI_CLK0P,
> CSI_D0M / CSI_D0P,
> CSI_D1M / CSI_D1P,
>
> CSI_D2 and D3 pins on the processor are all floating, and CSI_REXT is
> grounded through a 6.04k pull-down resistor.
>
> I am not sure if these technically translate to CSI0, CSI1, or CSI2,
> but I assumed the CSI2 since that's how the SabreSD board appears to
> work.
>
> The ov5640 is connected to i2c3 with the following tree entry:
>
> ov5640: camera@10 {
> compatible = "ovti,ov5640";
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_ov5640>;
> reg = <0x10>;
> clocks = <&clks IMX6QDL_CLK_CKO>;
> clock-names = "xclk";
> DOVDD-supply = <&mipi_pwr>;
> AVDD-supply = <&mipi_pwr>;
> DVDD-supply = <&mipi_pwr>;
> reset-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
> powerdown-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
>
> port {
> ov5640_to_mipi_csi2: endpoint {
> remote-endpoint = <&mipi_csi2_in>;
> clock-lanes = <0>;
> data-lanes = <1 2>;
> };
> };
>
> I will be the first person to admit, I don't understand how the
> clock-lands and data-lanes interact with the mipi_csis and the camera,
> but I tried to match the sabresd board device tree.
>
> For the MIPI_CSI interface, I wasn't sure which ports are the proper
> reference. Looking at the sabresd board, I used it as an example. I
> wasn't sure if port0 and reg 0 were the right options.
> &mipi_csi {
> status = "okay";
>
> port@0 {
> reg = <0>;
> mipi_csi2_in: endpoint {
> remote-endpoint = <&ov5640_to_mipi_csi2>;
> clock-lanes = <0>;
> data-lanes = <1 2>;
> };
> };
> };
>
> There was one section of the sabresd board that I wasn't sure I
> needed, because I am new to this camera stuff. I wasn't thinking I
> needed it, but I copied it because the sabresd board had it. I know
> it has two cameras, but the interaction between the csi interface and
> the ipu isn't clear to me.
>
> &ipu1_csi1_from_mipi_vc1 {
> clock-lanes = <0>;
> data-lanes = <1 2>;
> };
>
>
> I am not 100% certain the following is correct, but I tried to disable
> unwanted features to help save power, but it's quite possible it's
> interfering with the settings i have above.
>
> &ipu1_csi0 {
> status = "disabled";
> };
>
> &ipu2_csi0 {
> status = "disabled";
> };
>
> &mipi_dsi {
> status = "disabled";
> };
>
>
> > >
> > >
> > > >media-ctl -l "'ipu1_csi1':1 -> 'ipu1_ic_prp':0[1]"
> > > >media-ctl -l "'ipu1_ic_prp':1 -> 'ipu1_ic_prpenc':0[1]"
> > > >media-ctl -l "'ipu1_ic_prpenc':1 -> 'ipu1_ic_prpenc capture':0[1]"
> > > >
> > > >
> > > >media-ctl -V "'ov5640 2-0010':0 [fmt:UYVY2X8/640x480 field:none]"
> > > >media-ctl -V "'imx6-mipi-csi2':2 [fmt:UYVY2X8/640x480 field:none]"
> > > >media-ctl -V "'ipu1_csi1':1 [fmt:AYUV32/640x480 field:none]"
> > > >media-ctl -V "'ipu1_ic_prp':1 [fmt:AYUV32/640x480 field:none]"
> > > >media-ctl -V "'ipu1_ic_prpenc':1 [fmt:AYUV32/640x480 field:none]"
> > > >
> > > >
> > > > gst-launch-1.0 -v v4l2src num-buffers=1 device=/dev/video0 ! jpegenc
> > > >! filesink location=test.jpg
> >
> > Thanks, am I wrong or jpegenc is a software JPEG encoder?
> >
> > I was interested in options for capturing the JPEG frames as produced
> > by the sensor. I'm not even sure it is possible at all.
>
> I am ok with simple streaming to the screen. I'm ok with converting
> to video. At this point, I'm trying to just simply see the camera
> work. :-)
>
> >
> > > >
> > > >[ 72.799015] ipu1_ic_prpenc: EOF timeout
> > > >[ 73.838985] ipu1_ic_prpenc: wait last EOF timeout
> > > >
> > > >When I try to jump directly to 4.19-RC8, I get errors regarding memory
> > > >allocation, so I think there might be something else there I am
> > > >missing.
> > > >
> >
On startup the system shows the following linking the ov5640 to the imx6.
[ 7.301223] ov5640 2-0010: Linked as a consumer to regulator.17
[ 7.316817] coda 2040000.vpu: codec registered as /dev/video[8-9]
[ 7.365485] imx-media: subdev ov5640 2-0010 bound
[ 7.371381] imx-media: ov5640 2-0010:0 -> imx6-mipi-csi2:0
[ 7.383666] imx-media: imx6-mipi-csi2:4 -> ipu2_csi1_mux:0
[ 7.398218] imx-media: imx6-mipi-csi2:1 -> ipu1_csi0_mux:0
[ 7.404929] imx-media: ipu2_csi1:1 -> ipu2_ic_prp:0
[ 7.411899] imx-media: ipu2_csi1:1 -> ipu2_vdic:0
[ 7.418117] imx-media: ipu2_csi1_mux:2 -> ipu2_csi1:0
[ 7.424567] imx-media: ipu2_csi0:1 -> ipu2_ic_prp:0
[ 7.430350] imx-media: ipu2_csi0:1 -> ipu2_vdic:0
[ 7.437033] imx-media: imx6-mipi-csi2:3 -> ipu2_csi0:0
[ 7.442679] imx-media: ipu1_csi1:1 -> ipu1_ic_prp:0
[ 7.447742] imx-media: ipu1_csi1:1 -> ipu1_vdic:0
[ 7.452532] imx-media: imx6-mipi-csi2:2 -> ipu1_csi1:0
[ 7.457892] imx-media: ipu1_csi0:1 -> ipu1_ic_prp:0
[ 7.462815] imx-media: ipu1_csi0:1 -> ipu1_vdic:0
[ 7.467693] imx-media: ipu1_csi0_mux:2 -> ipu1_csi0:0
[ 7.472799] imx-media: ipu2_ic_prp:1 -> ipu2_ic_prpenc:0
[ 7.478304] imx-media: ipu2_ic_prp:2 -> ipu2_ic_prpvf:0
[ 7.483679] imx-media: ipu1_ic_prp:1 -> ipu1_ic_prpenc:0
[ 7.489043] imx-media: ipu1_ic_prp:2 -> ipu1_ic_prpvf:0
[ 7.494479] imx-media: ipu2_vdic:2 -> ipu2_ic_prp:0
[ 7.499468] imx-media: ipu1_vdic:2 -> ipu1_ic_prp:0
> > Please share the errors. I am using v4.19-rc7 without issues.
For the folllwing example, I am just trying to stream to a fakesink,
toward the bottom, there are a couple errors ''Failed to allocate
required memory' and 'Buffer pool activation failed'.
# gst-launch-1.0 --gst-debug=v4l2src:5 v4l2src device=/dev/video0 ! fakesink
Setting pipeline to PAUSED ...
Pipeline is live and does not need PREROLL ...
0:00:03.541852667 264 0xd5b600 DEBUG v4l2src
gstv4l2src.c:512:gst_v4l2src_negotiate:<v4l2src0> caps of src:
video/x-raw, format=(string)YUY2, framerate=(fraction)25/1,
width=(int)640, h
eight=(int)480; video/x-raw, format=(string)UYVY,
framerate=(fraction)25/1, width=(int)640, height=(int)480;
video/x-raw, format=(stri[ 218.912460] ipu1_ic_prpenc: pipeline start
failed with -32
ng)Y42B, framerate=(fraction)25/1, width=(int)640, height=(int)480;
video/x-raw, format=(string)I420, framerate=(fraction)25/1,
width=(int)640, height=(int)480; video/x-raw, format=(string)YV12,
framerate
=(fraction)25/1, width=(int)640, height=(int)480; video/x-raw,
format=(string)NV16, framerate=(fraction)25/1, width=(int)640,
height=(int)480; video/x-raw, format=(string)NV12,
framerate=(fraction)25/1, w
idth=(int)640, height=(int)480
0:00:03.542103334 264 0xd5b600 DEBUG v4l2src
gstv4l2src.c:520:gst_v4l2src_negotiate:<v4l2src0> caps of peer: ANY
0:00:03.542328667 264 0xd5b600 DEBUG v4l2src
gstv4l2src.c:403:gst_v4l2src_fixate:<v4l2src0> fixating caps
video/x-raw, format=(string)YUY2, framerate=(fraction)25/1,
width=(int)640, hei
ght=(int)480; video/x-raw, format=(string)UYVY,
framerate=(fraction)25/1, width=(int)640, height=(int)480;
video/x-raw, format=(string)Y42B, framerate=(fraction)25/1,
width=(int)640, height=(int)480; vide
o/x-raw, format=(string)I420, framerate=(fraction)25/1,
width=(int)640, height=(int)480; video/x-raw, format=(string)YV12,
framerate=(fraction)25/1, width=(int)640, height=(int)480;
video/x-raw, format=(s
tring)NV16, framerate=(fraction)25/1, width=(int)640, height=(int)480;
video/x-raw, format=(string)NV12, framerate=(fraction)25/1,
width=(int)640, height=(int)480
0:00:03.542499667 264 0xd5b600 DEBUG v4l2src
gstv4l2src.c:418:gst_v4l2src_fixate:<v4l2src0> Prefered size 3840x2160
Setting pipeline to PLAYING ...
0:00:03.543068334 264 0xd5b600 DEBUG v4l2src
gstv4l2src.c:435:gst_v4l2src_fixate:<v4l2src0> sorted and normalized
caps video/x-raw, format=(string)YUY2, framerate=(fraction)25/1,
width=
(int)640, height=(int)480; video/x-raw, format=(string)UYVY,
framerate=(fraction)25/1, width=(int)640, height=(int)480;
video/x-raw, format=(string)Y42B, framerate=(fraction)25/1,
width=(int)640, height=(
int)480; video/x-raw, format=(string)I420, framerate=(fraction)25/1,
width=(int)640, height=(int)480; video/x-raw, format=(string)YV12,
framerate=(fraction)25/1, width=(int)640, height=(int)480; video/x-r
aw, format=(string)NV16, framerate=(fraction)25/1, width=(int)640,
height=(int)480; video/x-raw, format=(string)NV12,
framerate=(fraction)25/1, width=(int)640, height=(int)480
New clock: GstSystemClock
0:00:03.544924000 264 0xd5b600 DEBUG v4l2src
gstv4l2src.c:497:gst_v4l2src_fixate:<v4l2src0> fixated caps
video/x-raw, format=(string)YUY2, framerate=(fraction)25/1,
width=(int)640, heig
ht=(int)480, colorimetry=(string)bt601, interlace-mode=(string)progressive
0:00:03.545072334 264 0xd5b600 DEBUG v4l2src
gstv4l2src.c:550:gst_v4l2src_negotiate:<v4l2src0> fixated to:
video/x-raw, format=(string)YUY2, framerate=(fraction)25/1,
width=(int)640, he
ight=(int)480, colorimetry=(string)bt601, interlace-mode=(string)progressive
0:00:03.582344000 264 0xd5b600 WARN v4l2src
gstv4l2src.c:658:gst_v4l2src_decide_allocation:<v4l2src0> error:
Failed to allocate required memory.
0:00:03.582701667 264 0xd5b600 WARN v4l2src
gstv4l2src.c:658:gst_v4l2src_decide_allocation:<v4l2src0> error:
Buffer pool activation failed
ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Failed
to allocate required memory.
Additional debug info:
gstv4l2src.c(658): gst_v4l2src_decide_allocation ():
/GstPipeline:pipeline0/GstV4l2Src:v4l2src0:
Buffer pool activation failed
Execution ended after 0:00:00.039860000
Setting pipeline to PAUSED ...
Setting pipeline to READY ...
Setting pipeline to NULL ...
Freeing pipeline ...
#
I configured the pipeline as follows:
media-ctl -l "'ov5640 2-0010':0 -> 'imx6-mipi-csi2':0[1]"
media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]"
media-ctl -l "'ipu1_csi1':1 -> 'ipu1_ic_prp':0[1]"
media-ctl -l "'ipu1_ic_prp':1 -> 'ipu1_ic_prpenc':0[1]"
media-ctl -l "'ipu1_ic_prpenc':1 -> 'ipu1_ic_prpenc capture':0[1]"
I am hoping I am doing this correctly.
adam
> >
> > > >Has anyone tried this camera module on a 4.14 kernel? I noticed there
> > > >are a bunch of driver updates, and I was hoping there might be some
> > > >patches that could be be backported to the 4.14.y stable branch.
> > >
> > > I would suggest backporting all the ov5640 commits. You can also
> > > backport the imx-media commits, but that shouldn't be the cause
> > > of the timeouts you are seeing.
> > >
> >
> > Yes, try to backport the recent ov5640 developments on your kernel
> > version. There are a lot of fixes there, and I don't think there is
> > any dependency on new developments on the v4l2 framework you don't
> > have in v4.14 (I might be wrong though).
>
> I ported the entire ov5640 driver, but there appear to be some v4l
> changes which preclude me from copying the whole driver. I was hoping
> to use as close to stock 4.14 LTS kernel since 4.19 isn't quite done
> yet. (I 'think' 4.19 will be an LTS kernel if I'm not mistaken, so
> this kernel is open for discussion if we must transition to it)
>
> My i.MX6 board is running some tests now, but I'll try to build
> 4.19-rc8 and share some logs.
> >
> > In case something breaks when cherry-picking patches or when building,
> > please share and someone might help (I have recently backported those
> > changes to a v3.14 kernel, so I might help too).
>
> I first went through the git commit logs for the ov5640 and tried to
> grab anything with the word 'fix' in the headlines. I'll try this
> afternoon, to get a better feeling for which fixes were ported. In
> theory, I can go and request certain fixes to be backported too, but I
> want to make sure they actually work before I waste people's time.
>
> adam
>
> >
> > Thanks
> > j
> >
> > >
> > > Steve
> > >
> > >
> > >
> > > >
> > > >thanks for any suggestions to try.
> > > >
> > > >adam
> > > >
> > > >>Thanks
> > > >> j
> > > >>
> > > >>>I've followed these[1] instructions to configure MC links and pads
> > > >>>based on the probing details from dmesg and trying to capture
> > > >>>ipu1_ic_prpenc capture (/dev/video1) but it's not working.
> > > >>>
> > > >>>Can anyone help me to verify whether I configured all the details
> > > >>>properly if not please suggest.
> > > >>>
> > > >>>I'm pasting full log here, so-that anyone can comment in line and dt
> > > >>>changes are at [2]
> > > >>>
> > > >>>Log:
> > > >>>-----
> > > >>>
> > > >>>[ 1.211866] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0
> > > >>>[ 1.220211] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 0
> > > >>>[ 1.230344] imx-ipuv3 2400000.ipu: IPUv3H probed
> > > >>>[ 1.237170] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> > > >>>[ 1.243920] [drm] No driver support for vblank timestamp query.
> > > >>>[ 1.250831] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops
> > > >>>ipu_crtc_ops)
> > > >>>[ 1.258503] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops
> > > >>>ipu_crtc_ops)
> > > >>>[ 1.266293] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops
> > > >>>ipu_crtc_ops)
> > > >>>[ 1.274027] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops
> > > >>>ipu_crtc_ops)
> > > >>>[ 1.282304] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller
> > > >>>v1.30a with HDCP (DWC HDMI 3D TX PHY)
> > > >>>[ 1.295722] imx-drm display-subsystem: bound 120000.hdmi (ops
> > > >>>dw_hdmi_imx_ops)
> > > >>>[ 1.373615] Console: switching to colour frame buffer device 128x48
> > > >>>[ 1.396495] imx-drm display-subsystem: fb0: frame buffer device
> > > >>>[ 1.404620] [drm] Initialized imx-drm 1.0.0 20120507 for
> > > >>>display-subsystem on minor 1
> > > >>>[ 1.412763] imx-ipuv3 2800000.ipu: IPUv3H probed
> > > >>>[ 1.439673] brd: module loaded
> > > >>>[ 1.469099] loop: module loaded
> > > >>>[ 1.480324] nand: No NAND device found
> > > >>>[ 1.487768] libphy: Fixed MDIO Bus: probed
> > > >>>[ 1.493034] CAN device driver interface
> > > >>>[ 1.499057] fec 2188000.ethernet: 2188000.ethernet supply phy not
> > > >>>found, using dummy regulator
> > > >>>[ 1.511633] pps pps0: new PPS source ptp0
> > > >>>[ 1.516928] fec 2188000.ethernet (unnamed net_device)
> > > >>>(uninitialized): Invalid MAC address: 00:00:00:00:00:00
> > > >>>[ 1.527177] fec 2188000.ethernet (unnamed net_device)
> > > >>>(uninitialized): Using random MAC address: f2:5a:6d:a6:90:74
> > > >>>[ 1.543567] libphy: fec_enet_mii_bus: probed
> > > >>>[ 1.549138] fec 2188000.ethernet eth0: registered PHC device 0
> > > >>>[ 1.556499] usbcore: registered new interface driver asix
> > > >>>[ 1.562066] usbcore: registered new interface driver ax88179_178a
> > > >>>[ 1.568259] usbcore: registered new interface driver cdc_ether
> > > >>>[ 1.574276] usbcore: registered new interface driver net1080
> > > >>>[ 1.580097] usbcore: registered new interface driver cdc_subset
> > > >>>[ 1.586144] usbcore: registered new interface driver zaurus
> > > >>>[ 1.591910] usbcore: registered new interface driver cdc_ncm
> > > >>>[ 1.597589] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> > > >>>[ 1.604209] ehci-pci: EHCI PCI platform driver
> > > >>>[ 1.608760] ehci-mxc: Freescale On-Chip EHCI Host driver
> > > >>>[ 1.614851] usbcore: registered new interface driver usb-storage
> > > >>>[ 1.629947] ci_hdrc ci_hdrc.0: EHCI Host Controller
> > > >>>[ 1.635066] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
> > > >>>[ 1.669473] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
> > > >>>[ 1.677809] hub 1-0:1.0: USB hub found
> > > >>>[ 1.681902] hub 1-0:1.0: 1 port detected
> > > >>>[ 1.692839] ci_hdrc ci_hdrc.1: EHCI Host Controller
> > > >>>[ 1.697791] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2
> > > >>>[ 1.729537] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
> > > >>>[ 1.736740] hub 2-0:1.0: USB hub found
> > > >>>[ 1.740655] hub 2-0:1.0: 1 port detected
> > > >>>[ 1.753468] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered
> > > >>>20cc000.snvs:snvs-rtc-lp as rtc0
> > > >>>[ 1.762976] i2c /dev entries driver
> > > >>>[ 1.811339] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
> > > >>>[ 1.817865] Bluetooth: HCI UART driver ver 2.3
> > > >>>[ 1.822460] Bluetooth: HCI UART protocol H4 registered
> > > >>>[ 1.828297] Bluetooth: HCI UART protocol LL registered
> > > >>>[ 1.834774] sdhci: Secure Digital Host Controller Interface driver
> > > >>>[ 1.841059] sdhci: Copyright(c) Pierre Ossman
> > > >>>[ 1.845437] sdhci-pltfm: SDHCI platform and OF driver helper
> > > >>>[ 1.852834] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO
> > > >>>[ 1.893497] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc]
> > > >>>using ADMA
> > > >>>[ 1.937500] mmc1: SDHCI controller on 2198000.usdhc [2198000.usdhc]
> > > >>>using ADMA
> > > >>>[ 1.945049] mmc0: host does not support reading read-only switch,
> > > >>>assuming write-enable
> > > >>>[ 1.959799] mmc0: new high speed SDHC card at address 1234
> > > >>>[ 1.968363] mmcblk0: mmc0:1234 SA04G 3.71 GiB
> > > >>>[ 1.977984] caam 2100000.caam: Entropy delay = 3200
> > > >>>[ 2.043796] caam 2100000.caam: Instantiated RNG4 SH0
> > > >>>[ 2.104558] caam 2100000.caam: Instantiated RNG4 SH1
> > > >>>[ 2.109596] caam 2100000.caam: device ID = 0x0a16010000000000 (Era 4)
> > > >>>[ 2.116060] caam 2100000.caam: job rings = 2, qi = 0, dpaa2 = no
> > > >>>[ 2.139266] caam algorithms registered in /proc/crypto
> > > >>>[ 2.139341] mmcblk0: p1 p2
> > > >>>[ 2.150910] caam_jr 2101000.jr0: registering rng-caam
> > > >>>[ 2.157327] usbcore: registered new interface driver usbhid
> > > >>>[ 2.163103] usbhid: USB HID core driver
> > > >>>[ 2.171149] imx-media: subdev ov5640 2-003c bound
> > > >>>[ 2.176631] imx-media: subdev ipu1_vdic bound
> > > >>>[ 2.181640] imx-media: subdev ipu2_vdic bound
> > > >>>[ 2.183831] mmc1: new high speed MMC card at address 0001
> > > >>>[ 2.186357] imx-media: subdev ipu1_ic_prp bound
> > > >>>[ 2.193649] mmcblk1: mmc1:0001 M62704 3.53 GiB
> > > >>>[ 2.197342] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video0
> > > >>>[ 2.202620] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB
> > > >>>[ 2.208083] imx-media: subdev ipu1_ic_prpenc bound
> > > >>>[ 2.215764] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB
> > > >>>[ 2.219512] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video1
> > > >>>[ 2.231868] imx-media: subdev ipu1_ic_prpvf bound
> > > >>>[ 2.232186] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB,
> > > >>>chardev (244:0)
> > > >>>[ 2.236748] imx-media: subdev ipu2_ic_prp bound
> > > >>>[ 2.245958] mmcblk1: p1 p2
> > > >>>[ 2.251569] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video2
> > > >>>[ 2.258696] imx-media: subdev ipu2_ic_prpenc bound
> > > >>>[ 2.264108] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video3
> > > >>>[ 2.271119] imx-media: subdev ipu2_ic_prpvf bound
> > > >>>[ 2.277042] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video4
> > > >>>[ 2.283312] imx-media: subdev ipu1_csi0 bound
> > > >>>[ 2.288312] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video5
> > > >>>[ 2.294583] imx-media: subdev ipu1_csi1 bound
> > > >>>[ 2.299694] ipu2_csi0: Registered ipu2_csi0 capture as /dev/video6
> > > >>>[ 2.305902] imx-media: subdev ipu2_csi0 bound
> > > >>>[ 2.310953] ipu2_csi1: Registered ipu2_csi1 capture as /dev/video7
> > > >>>[ 2.317162] imx-media: subdev ipu2_csi1 bound
> > > >>>[ 2.322293] imx-media: subdev imx6-mipi-csi2 bound
> > > >>>[ 2.336025] sgtl5000 2-000a: Error reading chip id -6
> > > >>>[ 2.346932] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW
> > > >>>[ 2.360345] NET: Registered protocol family 10
> > > >>>[ 2.367761] Segment Routing with IPv6
> > > >>>[ 2.371704] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
> > > >>>[ 2.379180] NET: Registered protocol family 17
> > > >>>[ 2.383872] can: controller area network core (rev 20170425 abi 9)
> > > >>>[ 2.390281] NET: Registered protocol family 29
> > > >>>[ 2.394756] can: raw protocol (rev 20170425)
> > > >>>[ 2.399126] can: broadcast manager protocol (rev 20170425 t)
> > > >>>[ 2.404869] can: netlink gateway (rev 20170425) max_hops=1
> > > >>>[ 2.410989] Key type dns_resolver registered
> > > >>>[ 2.420041] Registering SWP/SWPB emulation handler
> > > >>>[ 2.426337] Loading compiled-in X.509 certificates
> > > >>>[ 2.505422] imx-media: subdev ipu1_csi0_mux bound
> > > >>>[ 2.511142] imx-media: subdev ipu2_csi1_mux bound
> > > >>>[ 2.515930] imx-media: imx6-mipi-csi2:4 -> ipu2_csi1_mux:0
> > > >>>[ 2.518384] random: fast init done
> > > >>>[ 2.521600] imx-media: imx6-mipi-csi2:1 -> ipu1_csi0_mux:0
> > > >>>[ 2.530561] imx-media: ov5640 2-003c:0 -> imx6-mipi-csi2:0
> > > >>>[ 2.536094] imx-media: ipu2_csi1:1 -> ipu2_ic_prp:0
> > > >>>[ 2.541052] imx-media: ipu2_csi1:1 -> ipu2_vdic:0
> > > >>>[ 2.545801] imx-media: ipu2_csi1_mux:2 -> ipu2_csi1:0
> > > >>>[ 2.550932] imx-media: ipu2_csi0:1 -> ipu2_ic_prp:0
> > > >>>[ 2.555837] imx-media: ipu2_csi0:1 -> ipu2_vdic:0
> > > >>>[ 2.560629] imx-media: imx6-mipi-csi2:3 -> ipu2_csi0:0
> > > >>>[ 2.565800] imx-media: ipu1_csi1:1 -> ipu1_ic_prp:0
> > > >>>[ 2.570750] imx-media: ipu1_csi1:1 -> ipu1_vdic:0
> > > >>>[ 2.575497] imx-media: imx6-mipi-csi2:2 -> ipu1_csi1:0
> > > >>>[ 2.580716] imx-media: ipu1_csi0:1 -> ipu1_ic_prp:0
> > > >>>[ 2.585623] imx-media: ipu1_csi0:1 -> ipu1_vdic:0
> > > >>>[ 2.590411] imx-media: ipu1_csi0_mux:2 -> ipu1_csi0:0
> > > >>>[ 2.595499] imx-media: ipu2_ic_prp:1 -> ipu2_ic_prpenc:0
> > > >>>[ 2.600901] imx-media: ipu2_ic_prp:2 -> ipu2_ic_prpvf:0
> > > >>>[ 2.606159] imx-media: ipu1_ic_prp:1 -> ipu1_ic_prpenc:0
> > > >>>[ 2.611548] imx-media: ipu1_ic_prp:2 -> ipu1_ic_prpvf:0
> > > >>>[ 2.616803] imx-media: ipu2_vdic:2 -> ipu2_ic_prp:0
> > > >>>[ 2.621754] imx-media: ipu1_vdic:2 -> ipu1_ic_prp:0
> > > >>>[ 2.637015] imx_thermal tempmon: Industrial CPU temperature grade -
> > > >>>max:105C critical:100C passive:95C
> > > >>>[ 2.650475] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock
> > > >>>to 1970-01-01 00:00:00 UTC (0)
> > > >>>[ 2.659880] cfg80211: Loading compiled-in X.509 certificates for
> > > >>>regulatory database
> > > >>>[ 2.674031] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
> > > >>>[ 2.682013] platform regulatory.0: Direct firmware load for
> > > >>>regulatory.db failed with error -2
> > > >>>[ 2.690851] cfg80211: failed to load regulatory.db
> > > >>>[ 2.695737] ALSA device list:
> > > >>>[ 2.698762] No soundcards found.
> > > >>>[ 3.592224] EXT4-fs (mmcblk0p2): recovery complete
> > > >>>[ 3.602020] EXT4-fs (mmcblk0p2): mounted filesystem with ordered
> > > >>>data mode. Opts: (null)
> > > >>>[ 3.610371] VFS: Mounted root (ext4 filesystem) on device 179:2.
> > > >>>[ 3.618708] devtmpfs: mounted
> > > >>>[ 3.624665] Freeing unused kernel memory: 1024K
> > > >>>[ 3.743951] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
> > > >>>Starting logging: OK
> > > >>>Initializing random number generator... [ 3.897748] random: dd:
> > > >>>uninitialized urandom read (512 bytes read)
> > > >>>done.
> > > >>>Starting network: OK
> > > >>>
> > > >>>Welcome to Engicam i.CoreM6 Quad/Dual/DualLite/Solo
> > > >>>buildroot login: root
> > > >>># media-ctl -l "'ov5640 2-003c':0 -> 'imx6-mipi-csi2':0[1]"
> > > >>># media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]"
> > > >>># media-ctl -l "'ipu1_csi1':1 -> 'ipu1_ic_prp':0[1]"
> > > >>># media-ctl -l "'ipu1_ic_prp':1 -> 'ipu1_ic_prpenc':0[1]"
> > > >>># media-ctl -l "'ipu1_ic_prpenc':1 -> 'ipu1_ic_prpenc capture':0[1]"
> > > >>># media-ctl -V "'ov5640 2-003c':0 [fmt:UYVY2X8/640x480 field:none]"
> > > >>># media-ctl -V "'imx6-mipi-csi2':2 [fmt:UYVY2X8/640x480 field:none]"
> > > >>># media-ctl -V "'ipu1_csi1':1 [fmt:AYUV32/640x480 field:none]"
> > > >>># media-ctl -V "'ipu1_ic_prp':1 [fmt:AYUV32/640x480 field:none]"
> > > >>># media-ctl -V "'ipu1_ic_prpenc':1 [fmt:AYUV32/640x480 field:none]"
> > > >>># med# media-ctl -p
> > > >>>Media controller API version 4.17.0
> > > >>>
> > > >>>Media device information
> > > >>>------------------------
> > > >>>driver imx-media
> > > >>>model imx-media
> > > >>>serial
> > > >>>bus info
> > > >>>hw revision 0x0
> > > >>>driver version 4.17.0
> > > >>>
> > > >>>Device topology
> > > >>>- entity 1: ov5640 2-003c (1 pad, 1 link)
> > > >>> type V4L2 subdev subtype Sensor flags 0
> > > >>> device node name /dev/v4l-subdev0
> > > >>>pad0: Source
> > > >>>[fmt:UYVY8_2X8/640x480 field:none]
> > > >>>-> "imx6-mipi-csi2":0 [ENABLED]
> > > >>>
> > > >>>- entity 3: ipu1_vdic (3 pads, 3 links)
> > > >>> type V4L2 subdev subtype Unknown flags 0
> > > >>> device node name /dev/v4l-subdev1
> > > >>>pad0: Sink
> > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > >>><- "ipu1_csi0":1 []
> > > >>><- "ipu1_csi1":1 []
> > > >>>pad1: Sink
> > > >>>[fmt:UYVY8_2X8/640x480 field:none]
> > > >>>pad2: Source
> > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > >>>-> "ipu1_ic_prp":0 []
> > > >>>
> > > >>>- entity 7: ipu2_vdic (3 pads, 3 links)
> > > >>> type V4L2 subdev subtype Unknown flags 0
> > > >>> device node name /dev/v4l-subdev2
> > > >>>pad0: Sink
> > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > >>><- "ipu2_csi0":1 []
> > > >>><- "ipu2_csi1":1 []
> > > >>>pad1: Sink
> > > >>>[fmt:UYVY8_2X8/640x480 field:none]
> > > >>>pad2: Source
> > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > >>>-> "ipu2_ic_prp":0 []
> > > >>>
> > > >>>- entity 11: ipu1_ic_prp (3 pads, 5 links)
> > > >>> type V4L2 subdev subtype Unknown flags 0
> > > >>> device node name /dev/v4l-subdev3
> > > >>>pad0: Sink
> > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > >>><- "ipu1_vdic":2 []
> > > >>><- "ipu1_csi0":1 []
> > > >>><- "ipu1_csi1":1 [ENABLED]
> > > >>>pad1: Source
> > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > >>>-> "ipu1_ic_prpenc":0 [ENABLED]
> > > >>>pad2: Source
> > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > >>>-> "ipu1_ic_prpvf":0 []
> > > >>>
> > > >>>- entity 15: ipu1_ic_prpenc (2 pads, 2 links)
> > > >>> type V4L2 subdev subtype Unknown flags 0
> > > >>> device node name /dev/v4l-subdev4
> > > >>>pad0: Sink
> > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > >>><- "ipu1_ic_prp":1 [ENABLED]
> > > >>>pad1: Source
> > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > >>>-> "ipu1_ic_prpenc capture":0 [ENABLED]
> > > >>>
> > > >>>- entity 18: ipu1_ic_prpenc capture (1 pad, 1 link)
> > > >>> type Node subtype V4L flags 0
> > > >>> device node name /dev/video0
> > > >>>pad0: Sink
> > > >>><- "ipu1_ic_prpenc":1 [ENABLED]
> > > >>>
> > > >>>- entity 24: ipu1_ic_prpvf (2 pads, 2 links)
> > > >>> type V4L2 subdev subtype Unknown flags 0
> > > >>> device node name /dev/v4l-subdev5
> > > >>>pad0: Sink
> > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > >>><- "ipu1_ic_prp":2 []
> > > >>>pad1: Source
> > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > >>>-> "ipu1_ic_prpvf capture":0 []
> > > >>>
> > > >>>- entity 27: ipu1_ic_prpvf capture (1 pad, 1 link)
> > > >>> type Node subtype V4L flags 0
> > > >>> device node name /dev/video1
> > > >>>pad0: Sink
> > > >>><- "ipu1_ic_prpvf":1 []
> > > >>>
> > > >>>- entity 33: ipu2_ic_prp (3 pads, 5 links)
> > > >>> type V4L2 subdev subtype Unknown flags 0
> > > >>> device node name /dev/v4l-subdev6
> > > >>>pad0: Sink
> > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > >>><- "ipu2_vdic":2 []
> > > >>><- "ipu2_csi0":1 []
> > > >>><- "ipu2_csi1":1 []
> > > >>>pad1: Source
> > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > >>>-> "ipu2_ic_prpenc":0 []
> > > >>>pad2: Source
> > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > >>>-> "ipu2_ic_prpvf":0 []
> > > >>>
> > > >>>- entity 37: ipu2_ic_prpenc (2 pads, 2 links)
> > > >>> type V4L2 subdev subtype Unknown flags 0
> > > >>> device node name /dev/v4l-subdev7
> > > >>>pad0: Sink
> > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > >>><- "ipu2_ic_prp":1 []
> > > >>>pad1: Source
> > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > >>>-> "ipu2_ic_prpenc capture":0 []
> > > >>>
> > > >>>- entity 40: ipu2_ic_prpenc capture (1 pad, 1 link)
> > > >>> type Node subtype V4L flags 0
> > > >>> device node name /dev/video2
> > > >>>pad0: Sink
> > > >>><- "ipu2_ic_prpenc":1 []
> > > >>>
> > > >>>- entity 46: ipu2_ic_prpvf (2 pads, 2 links)
> > > >>> type V4L2 subdev subtype Unknown flags 0
> > > >>> device node name /dev/v4l-subdev8
> > > >>>pad0: Sink
> > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > >>><- "ipu2_ic_prp":2 []
> > > >>>pad1: Source
> > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > >>>-> "ipu2_ic_prpvf capture":0 []
> > > >>>
> > > >>>- entity 49: ipu2_ic_prpvf capture (1 pad, 1 link)
> > > >>> type Node subtype V4L flags 0
> > > >>> device node name /dev/video3
> > > >>>pad0: Sink
> > > >>><- "ipu2_ic_prpvf":1 []
> > > >>>
> > > >>>- entity 55: ipu1_csi0 (3 pads, 4 links)
> > > >>> type V4L2 subdev subtype Unknown flags 0
> > > >>> device node name /dev/v4l-subdev9
> > > >>>pad0: Sink
> > > >>>[fmt:UYVY8_2X8/640x480 field:none
> > > >>>crop.bounds:(0,0)/640x480
> > > >>>crop:(0,0)/640x480
> > > >>>compose.bounds:(0,0)/640x480
> > > >>>compose:(0,0)/640x480]
> > > >>><- "ipu1_csi0_mux":2 []
> > > >>>pad1: Source
> > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > >>>-> "ipu1_ic_prp":0 []
> > > >>>-> "ipu1_vdic":0 []
> > > >>>pad2: Source
> > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > >>>-> "ipu1_csi0 capture":0 []
> > > >>>
> > > >>>- entity 59: ipu1_csi0 capture (1 pad, 1 link)
> > > >>> type Node subtype V4L flags 0
> > > >>> device node name /dev/video4
> > > >>>pad0: Sink
> > > >>><- "ipu1_csi0":2 []
> > > >>>
> > > >>>- entity 65: ipu1_csi1 (3 pads, 4 links)
> > > >>> type V4L2 subdev subtype Unknown flags 0
> > > >>> device node name /dev/v4l-subdev10
> > > >>>pad0: Sink
> > > >>>[fmt:UYVY8_2X8/640x480 field:none
> > > >>>crop.bounds:(0,0)/640x480
> > > >>>crop:(0,0)/640x480
> > > >>>compose.bounds:(0,0)/640x480
> > > >>>compose:(0,0)/640x480]
> > > >>><- "imx6-mipi-csi2":2 [ENABLED]
> > > >>>pad1: Source
> > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > >>>-> "ipu1_ic_prp":0 [ENABLED]
> > > >>>-> "ipu1_vdic":0 []
> > > >>>pad2: Source
> > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > >>>-> "ipu1_csi1 capture":0 []
> > > >>>
> > > >>>- entity 69: ipu1_csi1 capture (1 pad, 1 link)
> > > >>> type Node subtype V4L flags 0
> > > >>> device node name /dev/video5
> > > >>>pad0: Sink
> > > >>><- "ipu1_csi1":2 []
> > > >>>
> > > >>>- entity 75: ipu2_csi0 (3 pads, 4 links)
> > > >>> type V4L2 subdev subtype Unknown flags 0
> > > >>> device node name /dev/v4l-subdev11
> > > >>>pad0: Sink
> > > >>>[fmt:UYVY8_2X8/640x480 field:none
> > > >>>crop.bounds:(0,0)/640x480
> > > >>>crop:(0,0)/640x480
> > > >>>compose.bounds:(0,0)/640x480
> > > >>>compose:(0,0)/640x480]
> > > >>><- "imx6-mipi-csi2":3 []
> > > >>>pad1: Source
> > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > >>>-> "ipu2_ic_prp":0 []
> > > >>>-> "ipu2_vdic":0 []
> > > >>>pad2: Source
> > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > >>>-> "ipu2_csi0 capture":0 []
> > > >>>
> > > >>>- entity 79: ipu2_csi0 capture (1 pad, 1 link)
> > > >>> type Node subtype V4L flags 0
> > > >>> device node name /dev/video6
> > > >>>pad0: Sink
> > > >>><- "ipu2_csi0":2 []
> > > >>>
> > > >>>- entity 85: ipu2_csi1 (3 pads, 4 links)
> > > >>> type V4L2 subdev subtype Unknown flags 0
> > > >>> device node name /dev/v4l-subdev12
> > > >>>pad0: Sink
> > > >>>[fmt:UYVY8_2X8/640x480 field:none
> > > >>>crop.bounds:(0,0)/640x480
> > > >>>crop:(0,0)/640x480
> > > >>>compose.bounds:(0,0)/640x480
> > > >>>compose:(0,0)/640x480]
> > > >>><- "ipu2_csi1_mux":2 []
> > > >>>pad1: Source
> > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > >>>-> "ipu2_ic_prp":0 []
> > > >>>-> "ipu2_vdic":0 []
> > > >>>pad2: Source
> > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > >>>-> "ipu2_csi1 capture":0 []
> > > >>>
> > > >>>- entity 89: ipu2_csi1 capture (1 pad, 1 link)
> > > >>> type Node subtype V4L flags 0
> > > >>> device node name /dev/video7
> > > >>>pad0: Sink
> > > >>><- "ipu2_csi1":2 []
> > > >>>
> > > >>>- entity 95: imx6-mipi-csi2 (5 pads, 5 links)
> > > >>> type V4L2 subdev subtype Unknown flags 0
> > > >>> device node name /dev/v4l-subdev13
> > > >>>pad0: Sink
> > > >>>[fmt:UYVY8_2X8/640x480 field:none]
> > > >>><- "ov5640 2-003c":0 [ENABLED]
> > > >>>pad1: Source
> > > >>>[fmt:UYVY8_2X8/640x480 field:none]
> > > >>>-> "ipu1_csi0_mux":0 []
> > > >>>pad2: Source
> > > >>>[fmt:UYVY8_2X8/640x480 field:none]
> > > >>>-> "ipu1_csi1":0 [ENABLED]
> > > >>>pad3: Source
> > > >>>[fmt:UYVY8_2X8/640x480 field:none]
> > > >>>-> "ipu2_csi0":0 []
> > > >>>pad4: Source
> > > >>>[fmt:UYVY8_2X8/640x480 field:none]
> > > >>>-> "ipu2_csi1_mux":0 []
> > > >>>
> > > >>>- entity 101: ipu1_csi0_mux (3 pads, 2 links)
> > > >>> type V4L2 subdev subtype Unknown flags 0
> > > >>> device node name /dev/v4l-subdev14
> > > >>>pad0: Sink
> > > >>>[fmt:unknown/0x0]
> > > >>><- "imx6-mipi-csi2":1 []
> > > >>>pad1: Sink
> > > >>>[fmt:unknown/0x0]
> > > >>>pad2: Source
> > > >>>[fmt:unknown/0x0]
> > > >>>-> "ipu1_csi0":0 []
> > > >>>
> > > >>>- entity 105: ipu2_csi1_mux (3 pads, 2 links)
> > > >>> type V4L2 subdev subtype Unknown flags 0
> > > >>> device node name /dev/v4l-subdev15
> > > >>>pad0: Sink
> > > >>>[fmt:unknown/0x0]
> > > >>><- "imx6-mipi-csi2":4 []
> > > >>>pad1: Sink
> > > >>>[fmt:unknown/0x0]
> > > >>>pad2: Source
> > > >>>[fmt:unknown/0x0]
> > > >>>-> "ipu2_csi1":0 []
> > > >>>
> > > >>># GST_DEBUG="v4l2*:5" gst-launch-1.0 -v v4l2src device=/dev/video1 ! \
> > > >>>>autovideosink
> > > >>>0:00:01.086281666 185 0x1dce880 DEBUG v4l2
> > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l1
> > > >>>0:00:01.087369666 185 0x1dce880 DEBUG v4l2
> > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l5
> > > >>>0:00:01.088496000 185 0x1dce880 DEBUG v4l2
> > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l.
> > > >>>0:00:01.089540333 185 0x1dce880 DEBUG v4l2
> > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4lR
> > > >>>0:00:01.090494666 185 0x1dce880 DEBUG v4l2
> > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4lH
> > > >>>0:00:01.091657666 185 0x1dce880 DEBUG v4l2
> > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l4
> > > >>>0:00:01.092745000 185 0x1dce880 DEBUG v4l2
> > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l
> > > >>>0:00:01.093703333 185 0x1dce880 DEBUG v4l2
> > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l
> > > >>>0:00:01.094854000 185 0x1dce880 DEBUG v4l2
> > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l
> > > >>>0:00:01.095815000 185 0x1dce880 DEBUG v4l2
> > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l
> > > >>>0:00:01.096818666 185 0x1dce880 DEBUG v4l2
> > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4lB
> > > >>>0:00:01.097819000 185 0x1dce880 DEBUG v4l2
> > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l8
> > > >>>0:00:01.098771000 185 0x1dce880 DEBUG v4l2
> > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l
> > > >>>0:00:01.099798666 185 0x1dce880 DEBUG v4l2
> > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l1
> > > >>>0:00:01.100776666 185 0x1dce880 DEBUG v4l2
> > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4lV
> > > >>>0:00:01.101755333 185 0x1dce880 DEBUG v4l2
> > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4lY
> > > >>>0:00:01.102771666 185 0x1dce880 DEBUG v4l2
> > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4lP
> > > >>>0:00:01.103712000 185 0x1dce880 DEBUG v4l2
> > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l4
> > > >>>0:00:01.104720000 185 0x1dce880 DEBUG v4l2
> > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4lO
> > > >>>0:00:01.105697000 185 0x1dce880 DEBUG v4l2
> > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4lP
> > > >>>0:00:01.106629666 185 0x1dce880 DEBUG v4l2
> > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l4
> > > >>>0:00:01.107681666 185 0x1dce880 DEBUG v4l2
> > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l4
> > > >>>0:00:01.108660666 185 0x1dce880 DEBUG v4l2
> > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l2
> > > >>>0:00:01.442437333 185 0x1dce880 DEBUG v4l2
> > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l0
> > > >>>0:00:01.444673333 185 0x1dce880 DEBUG v4l2
> > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l2
> > > >>>0:00:01.446842000 185 0x1dce880 DEBUG v4l2
> > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l2
> > > >>>0:00:01.449084000 185 0x1dce880 DEBUG v4l2
> > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l4
> > > >>>Setting pipeline to PAUSED ...
> > > >>>0:00:01.680823000 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:524:gst_v4l2_open:<v4l2src01
> > > >>>0:00:01.681953333 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:69:gst_v4l2_get_capabilities
> > > >>>0:00:01.683098666 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:140:gst_v4l2_fill_lists:<v4s
> > > >>>0:00:01.684056666 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:143:gst_v4l2_fill_lists:<v4s
> > > >>>0:00:01.685201000 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:215:gst_v4l2_fill_lists:<v4s
> > > >>>0:00:01.686159333 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > >>>0:00:01.687207666 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4C
> > > >>>0:00:01.688183666 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > >>>0:00:01.689155333 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4M
> > > >>>0:00:01.690142000 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > >>>0:00:01.691114000 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4P
> > > >>>0:00:01.692080000 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > >>>0:00:01.693073000 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4R
> > > >>>0:00:01.694043000 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > >>>0:00:01.695760000 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4L
> > > >>>0:00:01.696736333 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > >>>0:00:01.697708000 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4G
> > > >>>0:00:01.698699000 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > >>>0:00:01.699667000 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4H
> > > >>>0:00:01.700633000 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > >>>0:00:01.701623666 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4I
> > > >>>0:00:01.702591000 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > >>>0:00:01.703554333 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4K
> > > >>>0:00:01.704604000 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > >>>0:00:01.705576666 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4M
> > > >>>0:00:01.706567000 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > >>>0:00:02.040204667 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4B
> > > >>>0:00:02.042194667 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > >>>0:00:02.044190000 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4G
> > > >>>0:00:02.046338333 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > >>>0:00:02.048327667 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4H
> > > >>>0:00:02.050296000 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > >>>0:00:02.052385000 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4K
> > > >>>0:00:02.054376000 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > >>>0:00:02.056461333 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4L
> > > >>>0:00:02.058434000 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > >>>0:00:02.060423667 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4c
> > > >>>0:00:02.062382667 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:263:gst_v4l2_fill_lists:<v4s
> > > >>>0:00:02.064291333 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:283:gst_v4l2_fill_lists:<v40
> > > >>>0:00:02.066224667 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:292:gst_v4l2_fill_lists:<v4.
> > > >>>0:00:02.067190333 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:283:gst_v4l2_fill_lists:<v40
> > > >>>0:00:02.068174333 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:300:gst_v4l2_fill_lists:<v40
> > > >>>0:00:02.069141000 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:283:gst_v4l2_fill_lists:<v40
> > > >>>0:00:02.070113000 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:305:gst_v4l2_fill_lists:<v4d
> > > >>>0:00:02.071088333 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:456:gst_v4l2_fill_lists:<v4e
> > > >>>0:00:02.072040000 185 0x1dce880 INFO v4l2
> > > >>>v4l2_calls.c:592:gst_v4l2_open:<v4l2src0y
> > > >>>0:00:02.073017333 185 0x1dce880 DEBUG v4l2
> > > >>>gstv4l2object.c:804:gst_v4l2_set_default)
> > > >>>0:00:02.074010667 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:740:gst_v4l2_get_norm:<v4l2m
> > > >>>0:00:02.075021000 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:754:gst_v4l2_get_norm: Fail1
> > > >>>0:00:02.076012000 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:1027:gst_v4l2_get_input:<v4t
> > > >>>Pipeline is live and does not need PREROLL ...
> > > >>>0:00:02.080105333 185 0x1ec39b0 DEBUG v4l2
> > > >>>gstv4l2object.c:1109:gst_v4l2_object_fil.
> > > >>><v4l2src0> getting src format enumerations
> > > >>>0:00:02.412981333 185 0x1ec39b0 INFO New clock: GstSystemClock
> > > >>> v4l2 gstv4l2object.c:1146:gst_v4l2_object_fill_format_list:<v4l2src0>
> > > >>>got 7 format(s):
> > > >>>0:00:02.415407667 185 0x1ec39b0 INFO v4l2
> > > >>>gstv4l2object.c:1152:gst_v4l2_object_filV
> > > >>>0:00:02.417531667 185 0x1ec39b0 INFO v4l2
> > > >>>gstv4l2object.c:1152:gst_v4l2_object_filY
> > > >>>0:00:02.419703667 185 0x1ec39b0 INFO v4l2
> > > >>>gstv4l2object.c:1152:gst_v4l2_object_filP
> > > >>>0:00:02.421860000 185 0x1ec39b0 INFO v4l2
> > > >>>gstv4l2object.c:1152:gst_v4l2_object_fil2
> > > >>>0:00:02.424022667 185 0x1ec39b0 INFO v4l2
> > > >>>gstv4l2object.c:1152:gst_v4l2_object_fil2
> > > >>>0:00:02.426295000 185 0x1ec39b0 INFO v4l2
> > > >>>gstv4l2object.c:1152:gst_v4l2_object_fil6
> > > >>>0:00:02.428481333 185 0x1ec39b0 INFO v4l2
> > > >>>gstv4l2object.c:1152:gst_v4l2_object_fil2
> > > >>>0:00:02.430728333 185 0x1ec39b0 DEBUG v4l2
> > > >>>gstv4l2object.c:2564:gst_v4l2_object_proV
> > > >>>0:00:02.432985333 185 0x1ec39b0 DEBUG v4l2
> > > >>>gstv4l2object.c:2691:gst_v4l2_object_pro)
> > > >>>0:00:02.436117000 185 0x1ec39b0 DEBUG v4l2
> > > >>>gstv4l2object.c:2564:gst_v4l2_object_proY
> > > >>>0:00:02.437252333 185 0x1ec39b0 DEBUG v4l2
> > > >>>gstv4l2object.c:2691:gst_v4l2_object_pro)
> > > >>>0:00:02.438579000 185 0x1ec39b0 DEBUG v4l2
> > > >>>gstv4l2object.c:2564:gst_v4l2_object_proP
> > > >>>0:00:02.439656000 185 0x1ec39b0 DEBUG v4l2
> > > >>>gstv4l2object.c:2691:gst_v4l2_object_pro)
> > > >>>0:00:02.441016667 185 0x1ec39b0 DEBUG v4l2
> > > >>>gstv4l2object.c:2564:gst_v4l2_object_pro2
> > > >>>0:00:02.442092333 185 0x1ec39b0 DEBUG v4l2
> > > >>>gstv4l2object.c:2691:gst_v4l2_object_pro)
> > > >>>0:00:02.443443333 185 0x1ec39b0 DEBUG v4l2
> > > >>>gstv4l2object.c:2564:gst_v4l2_object_pro2
> > > >>>0:00:02.444626667 185 0x1ec39b0 DEBUG v4l2
> > > >>>gstv4l2object.c:2691:gst_v4l2_object_pro)
> > > >>>0:00:02.445990667 185 0x1ec39b0 DEBUG v4l2
> > > >>>gstv4l2object.c:2564:gst_v4l2_object_pro6
> > > >>>0:00:02.447063667 185 0x1ec39b0 DEBUG v4l2
> > > >>>gstv4l2object.c:2691:gst_v4l2_object_pro)
> > > >>>0:00:02.448410333 185 0x1ec39b0 DEBUG v4l2
> > > >>>gstv4l2object.c:2564:gst_v4l2_object_pro2
> > > >>>0:00:02.782148333 185 0x1ec39b0 DEBUG v4l2
> > > >>>gstv4l2object.c:2691:gst_v4l2_object_pro)
> > > >>>0:00:02.785264333 185 0x1ec39b0 INFO v4l2
> > > >>>gstv4l2object.c:3967:gst_v4l2_object_get}
> > > >>>0:00:02.788800000 185 0x1ec39b0 DEBUG v4l2src
> > > >>>gstv4l2src.c:300:gst_v4l2src_negotiate:<}
> > > >>>0:00:02.792207000 185 0x1ec39b0 DEBUG v4l2src
> > > >>>gstv4l2src.c:308:gst_v4l2src_negotiate:<]
> > > >>>0:00:02.795419000 185 0x1ec39b0 DEBUG v4l2src
> > > >>>gstv4l2src.c:316:gst_v4l2src_negotiate:<}
> > > >>>0:00:03.132052667 185 0x1ec39b0 DEBUG v4l2src
> > > >>>gstv4l2src.c:256:gst_v4l2src_fixate:<v4l}
> > > >>>0:00:03.134399667 185 0x1ec39b0 DEBUG v4l2src
> > > >>>gstv4l2src.c:282:gst_v4l2src_fixate:<v4l}
> > > >>>0:00:03.136800667 185 0x1ec39b0 DEBUG v4l2src
> > > >>>gstv4l2src.c:367:gst_v4l2src_negotiate:<1
> > > >>>0:00:03.139067333 185 0x1ec39b0 DEBUG v4l2
> > > >>>gstv4l2object.c:3887:gst_v4l2_object_stog
> > > >>>0:00:03.141452000 185 0x1ec39b0 DEBUG v4l2
> > > >>>gstv4l2object.c:3176:gst_v4l2_object_seto
> > > >>>0:00:03.143608667 185 0x1ec39b0 DEBUG v4l2
> > > >>>gstv4l2object.c:3310:gst_v4l2_object_set0
> > > >>>0:00:03.146025333 185 0x1ec39b0 DEBUG v4l2
> > > >>>gstv4l2object.c:3361:gst_v4l2_object_set1
> > > >>>0:00:03.148229000 185 0x1ec39b0 DEBUG v4l2
> > > >>>gstv4l2object.c:3370:gst_v4l2_object_set0
> > > >>>0:00:03.150373667 185 0x1ec39b0 DEBUG v4l2
> > > >>>gstv4l2object.c:3404:gst_v4l2_object_set1
> > > >>>0:00:03.152589667 185 0x1ec39b0 DEBUG v4l2
> > > >>>gstv4l2object.c:3414:gst_v4l2_object_set0
> > > >>>0:00:03.155250667 185 0x1ec39b0 DEBUG v4l2
> > > >>>gstv4l2object.c:3455:gst_v4l2_object_set1
> > > >>>0:00:03.156584667 185 0x1ec39b0 DEBUG v4l2
> > > >>>gstv4l2object.c:3472:gst_v4l2_object_set1
> > > >>>0:00:03.157659333 185 0x1ec39b0 INFO v4l2
> > > >>>gstv4l2object.c:3504:gst_v4l2_object_set1
> > > >>>0:00:03.491432000 185 0x1ec39b0 DEBUG v4l2
> > > >>>gstv4l2object.c:2960:gst_v4l2_object_ext0
> > > >>>0:00:03.493645333 185 0x1ec39b0 DEBUG v4l2
> > > >>>gstv4l2object.c:3071:gst_v4l2_object_sav0
> > > >>>0:00:03.496027333 185 0x1ec39b0 DEBUG v4l2
> > > >>>gstv4l2object.c:2843:gst_v4l2_object_setm
> > > >>>0:00:03.498180000 185 0x1ec39b0 INFO v4l2
> > > >>>gstv4l2object.c:2867:gst_v4l2_object_set2
> > > >>>0:00:03.502772000 185 0x1ec39b0 DEBUG v4l2bufferpool
> > > >>>gstv4l2bufferpool.c:509:gst_v4l2_buffer_;
> > > >>>0:00:03.505283333 185 0x1ec39b0 INFO v4l2bufferpool
> > > >>>gstv4l2bufferpool.c:557:gst_v4l2_buffer_2
> > > >>>0:00:03.507120000 185 0x1ec39b0 INFO v4l2bufferpool
> > > >>>gstv4l2bufferpool.c:570:gst_v4l2_buffer_2
> > > >>>/GstPipeline:pipeline0/GstV4l2Src:v4l2src0.GstPad:src: caps =
> > > >>>video/x-raw, format=(string)YUY2, width=(i1
> > > >>>/GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0.GstGhostPad:sink.GstProxyPad:proxypad0:
> > > >>>caps = vi1
> > > >>>/GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0/GstKMSSink:autovideosink0-actual-sink-kms.GstPad:1
> > > >>>0:00:03/GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0.GstGhostPad:sink:
> > > >>>caps = video/x-raw, form1
> > > >>>.512440000 185 0x1ec39b0 DEBUG v4l2
> > > >>>gstv4l2object.c:3985:gst_v4l2_object_decide_alln
> > > >>>0:00:03.513556667 185 0x1ec39b0 DEBUG v4l2
> > > >>>gstv4l2object.c:4011:gst_v4l2_object_dec>
> > > >>>0:00:03.514745667 185 0x1ec39b0 DEBUG v4l2
> > > >>>gstv4l2object.c:4069:gst_v4l2_object_dec>
> > > >>>0:00:03.515889000 185 0x1ec39b0 DEBUG v4l2
> > > >>>gstv4l2object.c:4134:gst_v4l2_object_deca
> > > >>>0:00:03.516969667 185 0x1ec39b0 DEBUG v4l2
> > > >>>gstv4l2object.c:4143:gst_v4l2_object_dec;
> > > >>>0:00:03.851350333 185 0x1ec39b0 DEBUG v4l2bufferpool
> > > >>>gstv4l2bufferpool.c:509:gst_v4l2_buffer_2
> > > >>>ams)NULL, options=(string)< GstBufferPoolOptionVideoMeta >;
> > > >>>0:00:03.853620333 185 0x1ec39b0 INFO v4l2bufferpool
> > > >>>gstv4l2bufferpool.c:570:gst_v4l2_buffer_2
> > > >>>0:00:03.855780667 185 0x1ec39b0 DEBUG v4l2
> > > >>>gstv4l2object.c:4150:gst_v4l2_object_dec;
> > > >>>0:00:03.858430000 185 0x1ec39b0 DEBUG v4l2bufferpool
> > > >>>gstv4l2bufferpool.c:509:gst_v4l2_buffer_;
> > > >>>0:00:03.861572333 185 0x1ec39b0 DEBUG v4l2bufferpool
> > > >>>gstv4l2bufferpool.c:707:gst_v4l2_buffer_l
> > > >>>0:00:03.863468333 185 0x1ec39b0 DEBUG v4l2bufferpool
> > > >>>gstv4l2bufferpool.c:737:gst_v4l2_buffer_s
> > > >>>0:00:03.918861000 185 0x1ec39b0 DEBUG v4l2allocator
> > > >>>gstv4l2allocator.c:706:gst_v4l2_allocatod
> > > >>>0:00:03.943783333 185 0x1ec39b0 DEBUG v4l2bufferpool
> > > >>>gstv4l2bufferpool.c:1389:gst_v4l2_buffer8
> > > >>>0:00:03.946129333 185 0x1ec39b0 DEBUG v4l2bufferpool
> > > >>>gstv4l2bufferpool.c:1389:gst_v4l2_buffer8
> > > >>>0:00:03.948065000 185 0x1ec39b0 DEBUG v4l2bufferpool
> > > >>>gstv4l2bufferpool.c:1389:gst_v4l2_buffer8
> > > >>>0:00:03.950006000 185 0x1ec39b0 DEBUG v4l2bufferpool
> > > >>>gstv4l2bufferpool.c:952:gst_v4l2_buffer_g
> > > >>>0:00:03.996241333 185 0x1ec39b0 ERROR v4l2bufferpool
> > > >>>gstv4l2bufferpool.c:641:gst_v4l2_buffer_)
> > > >>>0:00:03.998199667 185 0x1ec39b0 DEBUG v4l2bufferpool
> > > >>>gstv4l2bufferpool.c:1311:gst_v4l2_buffere
> > > >>>0:00:04.000463000 185 0x1ec39b0 WARN v4l2bufferpool
> > > >>>gstv4l2bufferpool.c:1064:gst_v4l2_buffer)
> > > >>>0:00:04.004649333 185 0x1ec39b0 DEBUG v4l2bufferpool
> > > >>>gstv4l2bufferpool.c:1283:gst_v4l2_bufferr
> > > >>>0:00:04.005853333 185 0x1ec39b0 WARN v4l2src
> > > >>>gstv4l2src.c:866:gst_v4l2src_create:<v4lr
> > > >>>ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Could
> > > >>>not read from resource.
> > > >>>Additional debug info:
> > > >>>gstv4l2bufferpool.c(1064): gst_v4l2_buffer_pool_poll ():
> > > >>>/GstPipeline:pipeline0/GstV4l2Src:v4l2src0:
> > > >>>poll error 1: Resource temporarily unavailable (11)
> > > >>>Execution ended after 0:00:01.606871334
> > > >>>Setting pipeline to PAUSED ...
> > > >>>0:00:04.022385000 185 0x1dce880 DEBUG v4l2bufferpool
> > > >>>gstv4l2bufferpool.c:931:gst_v4l2_buffer_g
> > > >>>Setting pipeline to READY ...
> > > >>>0:00:04.024850667 185 0x1dce880 DEBUG v4l2bufferpool
> > > >>>gstv4l2bufferpool.c:879:gst_v4l2_buffer_l
> > > >>>0:00:04.026764000 185 0x1dce880 DEBUG v4l2allocator
> > > >>>gstv4l2allocator.c:757:gst_v4l2_allocator
> > > >>>0:00:04.028598333 185 0x1dce880 DEBUG v4l2allocator
> > > >>>gstv4l2allocator.c:765:gst_v4l2_allocatoe
> > > >>>0:00:04.362785667 185 0x1dce880 WARN v4l2bufferpool
> > > >>>gstv4l2bufferpool.c:918:gst_v4l2_buffer_g
> > > >>>0:00:04.364712333 185 0x1dce880 DEBUG v4l2bufferpool
> > > >>>gstv4l2bufferpool.c:952:gst_v4l2_buffer_g
> > > >>>0:00:04.366504333 185 0x1dce880 DEBUG v4l2bufferpool
> > > >>>gstv4l2bufferpool.c:629:gst_v4l2_buffer_g
> > > >>>0:00:04.368607000 185 0x1dce880 DEBUG v4l2
> > > >>>gstv4l2object.c:3887:gst_v4l2_object_stog
> > > >>>0:00:04.370713333 185 0x1dce880 DEBUG v4l2
> > > >>>gstv4l2object.c:3895:gst_v4l2_object_stol
> > > >>>0:00:04.372809333 185 0x1dce880 DEBUG v4l2bufferpool
> > > >>>gstv4l2bufferpool.c:931:gst_v4l2_buffer_g
> > > >>>0:00:04.374732000 185 0x1dce880 DEBUG v4l2bufferpool
> > > >>>gstv4l2bufferpool.c:879:gst_v4l2_buffer_l
> > > >>>0:00:04.376541000 185 0x1dce880 DEBUG v4l2bufferpool
> > > >>>gstv4l2bufferpool.c:663:gst_v4l2_buffer_g
> > > >>>0:00:04.378334000 185 0x1dce880 DEBUG v4l2allocator
> > > >>>gstv4l2allocator.c:757:gst_v4l2_allocator
> > > >>>Setting pipeline to NULL ...
> > > >>>0:00:04.394764333 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:716:gst_v4l2_close:<v4l2src1
> > > >>>0:00:04.395897667 185 0x1dce880 DEBUG v4l2
> > > >>>v4l2_calls.c:464:gst_v4l2_empty_lists:<vs
> > > >>>Freeing pipeline ...
> > > >>>
> > > >>>[1] https://linuxtv.org/downloads/v4l-dvb-apis/v4l-drivers/imx.html#sabresd-with-mipi-csi-2-ov5640
> > > >>>[2] https://paste.ubuntu.com/p/CTvFqdbyMW/
> > > >>>
> > > >>>Jagan.
> > > >>>
> > > >>>--
> > > >>>Jagan Teki
> > > >>>Senior Linux Kernel Engineer | Amarula Solutions
> > > >>>U-Boot, Linux | Upstream Maintainer
> > > >>>Hyderabad, India.
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
2018-10-19 19:42 ` Adam Ford
@ 2018-10-22 11:33 ` jacopo mondi
2018-10-22 12:25 ` Adam Ford
0 siblings, 1 reply; 38+ messages in thread
From: jacopo mondi @ 2018-10-22 11:33 UTC (permalink / raw)
To: Adam Ford
Cc: steve_longerbeam, Jagan Teki, p.zabel, Fabio Estevam,
gstreamer-devel, linux-media, Linux Kernel Mailing List
[-- Attachment #1: Type: text/plain, Size: 61649 bytes --]
Hi Adam,
On Fri, Oct 19, 2018 at 02:42:56PM -0500, Adam Ford wrote:
> On Fri, Oct 19, 2018 at 8:45 AM Adam Ford <aford173@gmail.com> wrote:
> >
> > On Wed, Oct 17, 2018 at 3:01 AM jacopo mondi <jacopo@jmondi.org> wrote:
> > >
> > > Hi Adam, Seve,
> > >
> > > On Tue, Oct 16, 2018 at 05:13:24PM -0700, Steve Longerbeam wrote:
> > > > Hi Adam,
> > > >
> > > >
> > > > On 10/16/18 12:46 PM, Adam Ford wrote:
> > > > >On Thu, Sep 20, 2018 at 9:58 AM jacopo mondi <jacopo@jmondi.org> wrote:
> > > > >>Hi imx6 people,
> > > > >>
> > > > >>On Thu, May 31, 2018 at 08:39:20PM +0530, Jagan Teki wrote:
> > > > >>>Hi All,
> > > > >>>
> > > > >>>I'm trying to verify MIPI-CSI2 OV5640 camera on i.MX6 platform with
> > > > >>>Mainline Linux.
> > > > >>Sorry to resurect this, but before diving deep into details, do anyone
> > > > >>of you verified JPEG capture with ov5640 and i.MX6 platforms, and has
> > > > >>maybe a pipeline configuration to share :) ?
> > > > >
> > > > >I have a 4.14 kernel for my i.MX6D/Q using an ov5640 connected in a
> > > > >similar way as the sabresd and I'm getting similar timeouts.
> > > > >when executing
> > > > >
> > > > >media-ctl -l "'ov5640 2-0010':0 -> 'imx6-mipi-csi2':0[1]"
> > > > >media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]"
> > > >
> > > >
> > > > You're routing through imx6-mipi-csi2 pad 2, which is CSI-2 virtual
> > > > channel 1, so make sure the ov5640 is transmitting on that channel,
> > > > see virtual_channel module parameter.
> >
> > First, I want to apologize for the spam. I don't normally want to ask
> > for hand-holding, but after spending 4 solid days on this, I'm getting
> > frustrated, and I've tried to read the instructions, and the technical
> > reference manual is huge and somewhat overwhelming.
> >
> > Once I get my hardware working and I develop a better understanding of
> > how this system works, I'll be more than happy to volunteer to help
> > test patches on my hardware.
> >
> > I am not sure I fully understand how the media-ctl handles the
> > routing. I just basically copied what I could find from some
> > documentation. I looked for some documentation but I wasn't able to
> > find much. Maybe you can point me to some.
> >
> > I can share with you some of my device tree, and I'll try to explain
> > my connections. Firstly, I have an i.MX6Q and i.MX6Q which share the
> > same device tree.
> >
> > The CSI pins on the OV5640 camera go to i.MX6 pins:
> > CSI_CLK0M / CSI_CLK0P,
> > CSI_D0M / CSI_D0P,
> > CSI_D1M / CSI_D1P,
> >
> > CSI_D2 and D3 pins on the processor are all floating, and CSI_REXT is
> > grounded through a 6.04k pull-down resistor.
> >
> > I am not sure if these technically translate to CSI0, CSI1, or CSI2,
> > but I assumed the CSI2 since that's how the SabreSD board appears to
> > work.
> >
> > The ov5640 is connected to i2c3 with the following tree entry:
> >
> > ov5640: camera@10 {
> > compatible = "ovti,ov5640";
> > pinctrl-names = "default";
> > pinctrl-0 = <&pinctrl_ov5640>;
> > reg = <0x10>;
> > clocks = <&clks IMX6QDL_CLK_CKO>;
> > clock-names = "xclk";
> > DOVDD-supply = <&mipi_pwr>;
> > AVDD-supply = <&mipi_pwr>;
> > DVDD-supply = <&mipi_pwr>;
> > reset-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
> > powerdown-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
> >
> > port {
> > ov5640_to_mipi_csi2: endpoint {
> > remote-endpoint = <&mipi_csi2_in>;
> > clock-lanes = <0>;
> > data-lanes = <1 2>;
> > };
> > };
> >
> > I will be the first person to admit, I don't understand how the
> > clock-lands and data-lanes interact with the mipi_csis and the camera,
> > but I tried to match the sabresd board device tree.
> >
> > For the MIPI_CSI interface, I wasn't sure which ports are the proper
> > reference. Looking at the sabresd board, I used it as an example. I
> > wasn't sure if port0 and reg 0 were the right options.
> > &mipi_csi {
> > status = "okay";
> >
> > port@0 {
> > reg = <0>;
> > mipi_csi2_in: endpoint {
> > remote-endpoint = <&ov5640_to_mipi_csi2>;
> > clock-lanes = <0>;
> > data-lanes = <1 2>;
> > };
> > };
> > };
> >
> > There was one section of the sabresd board that I wasn't sure I
> > needed, because I am new to this camera stuff. I wasn't thinking I
> > needed it, but I copied it because the sabresd board had it. I know
> > it has two cameras, but the interaction between the csi interface and
> > the ipu isn't clear to me.
> >
> > &ipu1_csi1_from_mipi_vc1 {
> > clock-lanes = <0>;
> > data-lanes = <1 2>;
> > };
> >
> >
> > I am not 100% certain the following is correct, but I tried to disable
> > unwanted features to help save power, but it's quite possible it's
> > interfering with the settings i have above.
> >
> > &ipu1_csi0 {
> > status = "disabled";
> > };
> >
> > &ipu2_csi0 {
> > status = "disabled";
> > };
> >
> > &mipi_dsi {
> > status = "disabled";
> > };
> >
> >
> > > >
> > > >
> > > > >media-ctl -l "'ipu1_csi1':1 -> 'ipu1_ic_prp':0[1]"
> > > > >media-ctl -l "'ipu1_ic_prp':1 -> 'ipu1_ic_prpenc':0[1]"
> > > > >media-ctl -l "'ipu1_ic_prpenc':1 -> 'ipu1_ic_prpenc capture':0[1]"
> > > > >
> > > > >
> > > > >media-ctl -V "'ov5640 2-0010':0 [fmt:UYVY2X8/640x480 field:none]"
> > > > >media-ctl -V "'imx6-mipi-csi2':2 [fmt:UYVY2X8/640x480 field:none]"
> > > > >media-ctl -V "'ipu1_csi1':1 [fmt:AYUV32/640x480 field:none]"
> > > > >media-ctl -V "'ipu1_ic_prp':1 [fmt:AYUV32/640x480 field:none]"
> > > > >media-ctl -V "'ipu1_ic_prpenc':1 [fmt:AYUV32/640x480 field:none]"
> > > > >
> > > > >
> > > > > gst-launch-1.0 -v v4l2src num-buffers=1 device=/dev/video0 ! jpegenc
> > > > >! filesink location=test.jpg
> > >
> > > Thanks, am I wrong or jpegenc is a software JPEG encoder?
> > >
> > > I was interested in options for capturing the JPEG frames as produced
> > > by the sensor. I'm not even sure it is possible at all.
> >
> > I am ok with simple streaming to the screen. I'm ok with converting
> > to video. At this point, I'm trying to just simply see the camera
> > work. :-)
> >
> > >
> > > > >
> > > > >[ 72.799015] ipu1_ic_prpenc: EOF timeout
> > > > >[ 73.838985] ipu1_ic_prpenc: wait last EOF timeout
> > > > >
> > > > >When I try to jump directly to 4.19-RC8, I get errors regarding memory
> > > > >allocation, so I think there might be something else there I am
> > > > >missing.
> > > > >
> > >
>
> On startup the system shows the following linking the ov5640 to the imx6.
>
> [ 7.301223] ov5640 2-0010: Linked as a consumer to regulator.17
> [ 7.316817] coda 2040000.vpu: codec registered as /dev/video[8-9]
> [ 7.365485] imx-media: subdev ov5640 2-0010 bound
> [ 7.371381] imx-media: ov5640 2-0010:0 -> imx6-mipi-csi2:0
> [ 7.383666] imx-media: imx6-mipi-csi2:4 -> ipu2_csi1_mux:0
> [ 7.398218] imx-media: imx6-mipi-csi2:1 -> ipu1_csi0_mux:0
> [ 7.404929] imx-media: ipu2_csi1:1 -> ipu2_ic_prp:0
> [ 7.411899] imx-media: ipu2_csi1:1 -> ipu2_vdic:0
> [ 7.418117] imx-media: ipu2_csi1_mux:2 -> ipu2_csi1:0
> [ 7.424567] imx-media: ipu2_csi0:1 -> ipu2_ic_prp:0
> [ 7.430350] imx-media: ipu2_csi0:1 -> ipu2_vdic:0
> [ 7.437033] imx-media: imx6-mipi-csi2:3 -> ipu2_csi0:0
> [ 7.442679] imx-media: ipu1_csi1:1 -> ipu1_ic_prp:0
> [ 7.447742] imx-media: ipu1_csi1:1 -> ipu1_vdic:0
> [ 7.452532] imx-media: imx6-mipi-csi2:2 -> ipu1_csi1:0
> [ 7.457892] imx-media: ipu1_csi0:1 -> ipu1_ic_prp:0
> [ 7.462815] imx-media: ipu1_csi0:1 -> ipu1_vdic:0
> [ 7.467693] imx-media: ipu1_csi0_mux:2 -> ipu1_csi0:0
> [ 7.472799] imx-media: ipu2_ic_prp:1 -> ipu2_ic_prpenc:0
> [ 7.478304] imx-media: ipu2_ic_prp:2 -> ipu2_ic_prpvf:0
> [ 7.483679] imx-media: ipu1_ic_prp:1 -> ipu1_ic_prpenc:0
> [ 7.489043] imx-media: ipu1_ic_prp:2 -> ipu1_ic_prpvf:0
> [ 7.494479] imx-media: ipu2_vdic:2 -> ipu2_ic_prp:0
> [ 7.499468] imx-media: ipu1_vdic:2 -> ipu1_ic_prp:0
>
>
> > > Please share the errors. I am using v4.19-rc7 without issues.
>
> For the folllwing example, I am just trying to stream to a fakesink,
> toward the bottom, there are a couple errors ''Failed to allocate
> required memory' and 'Buffer pool activation failed'.
>
>
> # gst-launch-1.0 --gst-debug=v4l2src:5 v4l2src device=/dev/video0 ! fakesink
> Setting pipeline to PAUSED ...
> Pipeline is live and does not need PREROLL ...
> 0:00:03.541852667 264 0xd5b600 DEBUG v4l2src
> gstv4l2src.c:512:gst_v4l2src_negotiate:<v4l2src0> caps of src:
> video/x-raw, format=(string)YUY2, framerate=(fraction)25/1,
> width=(int)640, h
> eight=(int)480; video/x-raw, format=(string)UYVY,
> framerate=(fraction)25/1, width=(int)640, height=(int)480;
> video/x-raw, format=(stri[ 218.912460] ipu1_ic_prpenc: pipeline start
> failed with -32
> ng)Y42B, framerate=(fraction)25/1, width=(int)640, height=(int)480;
> video/x-raw, format=(string)I420, framerate=(fraction)25/1,
> width=(int)640, height=(int)480; video/x-raw, format=(string)YV12,
> framerate
> =(fraction)25/1, width=(int)640, height=(int)480; video/x-raw,
> format=(string)NV16, framerate=(fraction)25/1, width=(int)640,
> height=(int)480; video/x-raw, format=(string)NV12,
> framerate=(fraction)25/1, w
> idth=(int)640, height=(int)480
> 0:00:03.542103334 264 0xd5b600 DEBUG v4l2src
> gstv4l2src.c:520:gst_v4l2src_negotiate:<v4l2src0> caps of peer: ANY
> 0:00:03.542328667 264 0xd5b600 DEBUG v4l2src
> gstv4l2src.c:403:gst_v4l2src_fixate:<v4l2src0> fixating caps
> video/x-raw, format=(string)YUY2, framerate=(fraction)25/1,
> width=(int)640, hei
> ght=(int)480; video/x-raw, format=(string)UYVY,
> framerate=(fraction)25/1, width=(int)640, height=(int)480;
> video/x-raw, format=(string)Y42B, framerate=(fraction)25/1,
> width=(int)640, height=(int)480; vide
> o/x-raw, format=(string)I420, framerate=(fraction)25/1,
> width=(int)640, height=(int)480; video/x-raw, format=(string)YV12,
> framerate=(fraction)25/1, width=(int)640, height=(int)480;
> video/x-raw, format=(s
> tring)NV16, framerate=(fraction)25/1, width=(int)640, height=(int)480;
> video/x-raw, format=(string)NV12, framerate=(fraction)25/1,
> width=(int)640, height=(int)480
> 0:00:03.542499667 264 0xd5b600 DEBUG v4l2src
> gstv4l2src.c:418:gst_v4l2src_fixate:<v4l2src0> Prefered size 3840x2160
> Setting pipeline to PLAYING ...
> 0:00:03.543068334 264 0xd5b600 DEBUG v4l2src
> gstv4l2src.c:435:gst_v4l2src_fixate:<v4l2src0> sorted and normalized
> caps video/x-raw, format=(string)YUY2, framerate=(fraction)25/1,
> width=
> (int)640, height=(int)480; video/x-raw, format=(string)UYVY,
> framerate=(fraction)25/1, width=(int)640, height=(int)480;
> video/x-raw, format=(string)Y42B, framerate=(fraction)25/1,
> width=(int)640, height=(
> int)480; video/x-raw, format=(string)I420, framerate=(fraction)25/1,
> width=(int)640, height=(int)480; video/x-raw, format=(string)YV12,
> framerate=(fraction)25/1, width=(int)640, height=(int)480; video/x-r
> aw, format=(string)NV16, framerate=(fraction)25/1, width=(int)640,
> height=(int)480; video/x-raw, format=(string)NV12,
> framerate=(fraction)25/1, width=(int)640, height=(int)480
> New clock: GstSystemClock
> 0:00:03.544924000 264 0xd5b600 DEBUG v4l2src
> gstv4l2src.c:497:gst_v4l2src_fixate:<v4l2src0> fixated caps
> video/x-raw, format=(string)YUY2, framerate=(fraction)25/1,
> width=(int)640, heig
> ht=(int)480, colorimetry=(string)bt601, interlace-mode=(string)progressive
> 0:00:03.545072334 264 0xd5b600 DEBUG v4l2src
> gstv4l2src.c:550:gst_v4l2src_negotiate:<v4l2src0> fixated to:
> video/x-raw, format=(string)YUY2, framerate=(fraction)25/1,
> width=(int)640, he
> ight=(int)480, colorimetry=(string)bt601, interlace-mode=(string)progressive
> 0:00:03.582344000 264 0xd5b600 WARN v4l2src
> gstv4l2src.c:658:gst_v4l2src_decide_allocation:<v4l2src0> error:
> Failed to allocate required memory.
> 0:00:03.582701667 264 0xd5b600 WARN v4l2src
> gstv4l2src.c:658:gst_v4l2src_decide_allocation:<v4l2src0> error:
> Buffer pool activation failed
> ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Failed
> to allocate required memory.
> Additional debug info:
> gstv4l2src.c(658): gst_v4l2src_decide_allocation ():
> /GstPipeline:pipeline0/GstV4l2Src:v4l2src0:
> Buffer pool activation failed
> Execution ended after 0:00:00.039860000
> Setting pipeline to PAUSED ...
> Setting pipeline to READY ...
> Setting pipeline to NULL ...
> Freeing pipeline ...
> #
>
>
>
>
> I configured the pipeline as follows:
> media-ctl -l "'ov5640 2-0010':0 -> 'imx6-mipi-csi2':0[1]"
> media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]"
> media-ctl -l "'ipu1_csi1':1 -> 'ipu1_ic_prp':0[1]"
> media-ctl -l "'ipu1_ic_prp':1 -> 'ipu1_ic_prpenc':0[1]"
> media-ctl -l "'ipu1_ic_prpenc':1 -> 'ipu1_ic_prpenc capture':0[1]"
>
> I am hoping I am doing this correctly.
>
I admit I have copied the pipeline setup script I used from Jagan's website
#https://openedev.amarulasolutions.com/display/ODWIKI/i.CoreM6+1.5#i.CoreM61.5-MIPI-CSI2OV5640Camera
Here it is for reference:
media-ctl --links "'ov5640 2-003c':0->'imx6-mipi-csi2':0[1]"
media-ctl --links "'imx6-mipi-csi2':1->'ipu1_csi0_mux':0[1]"
media-ctl --links "'ipu1_csi0_mux':2->'ipu1_csi0':0[1]"
media-ctl --links "'ipu1_csi0':2->'ipu1_csi0 capture':0[1]"
media-ctl --set-v4l2 "'ov5640 2-003c':0[fmt:UYVY2X8/640x480 field:none]"
media-ctl --set-v4l2 "'imx6-mipi-csi2':1[fmt:UYVY2X8/640x480 field:none]"
media-ctl --set-v4l2 "'ipu1_csi0_mux':2[fmt:UYVY2X8/640x480 field:none]"
media-ctl --set-v4l2 "'ipu1_csi0':2[fmt:AYUV32/640x480 field:none]"
gst-launch-1.0 -v v4l2src device=/dev/video4 ! fakesink
Hope it helps
> adam
>
> > >
> > > > >Has anyone tried this camera module on a 4.14 kernel? I noticed there
> > > > >are a bunch of driver updates, and I was hoping there might be some
> > > > >patches that could be be backported to the 4.14.y stable branch.
> > > >
> > > > I would suggest backporting all the ov5640 commits. You can also
> > > > backport the imx-media commits, but that shouldn't be the cause
> > > > of the timeouts you are seeing.
> > > >
> > >
> > > Yes, try to backport the recent ov5640 developments on your kernel
> > > version. There are a lot of fixes there, and I don't think there is
> > > any dependency on new developments on the v4l2 framework you don't
> > > have in v4.14 (I might be wrong though).
> >
> > I ported the entire ov5640 driver, but there appear to be some v4l
> > changes which preclude me from copying the whole driver. I was hoping
> > to use as close to stock 4.14 LTS kernel since 4.19 isn't quite done
> > yet. (I 'think' 4.19 will be an LTS kernel if I'm not mistaken, so
> > this kernel is open for discussion if we must transition to it)
> >
> > My i.MX6 board is running some tests now, but I'll try to build
> > 4.19-rc8 and share some logs.
> > >
> > > In case something breaks when cherry-picking patches or when building,
> > > please share and someone might help (I have recently backported those
> > > changes to a v3.14 kernel, so I might help too).
> >
> > I first went through the git commit logs for the ov5640 and tried to
> > grab anything with the word 'fix' in the headlines. I'll try this
> > afternoon, to get a better feeling for which fixes were ported. In
> > theory, I can go and request certain fixes to be backported too, but I
> > want to make sure they actually work before I waste people's time.
> >
> > adam
> >
> > >
> > > Thanks
> > > j
> > >
> > > >
> > > > Steve
> > > >
> > > >
> > > >
> > > > >
> > > > >thanks for any suggestions to try.
> > > > >
> > > > >adam
> > > > >
> > > > >>Thanks
> > > > >> j
> > > > >>
> > > > >>>I've followed these[1] instructions to configure MC links and pads
> > > > >>>based on the probing details from dmesg and trying to capture
> > > > >>>ipu1_ic_prpenc capture (/dev/video1) but it's not working.
> > > > >>>
> > > > >>>Can anyone help me to verify whether I configured all the details
> > > > >>>properly if not please suggest.
> > > > >>>
> > > > >>>I'm pasting full log here, so-that anyone can comment in line and dt
> > > > >>>changes are at [2]
> > > > >>>
> > > > >>>Log:
> > > > >>>-----
> > > > >>>
> > > > >>>[ 1.211866] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0
> > > > >>>[ 1.220211] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 0
> > > > >>>[ 1.230344] imx-ipuv3 2400000.ipu: IPUv3H probed
> > > > >>>[ 1.237170] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> > > > >>>[ 1.243920] [drm] No driver support for vblank timestamp query.
> > > > >>>[ 1.250831] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops
> > > > >>>ipu_crtc_ops)
> > > > >>>[ 1.258503] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops
> > > > >>>ipu_crtc_ops)
> > > > >>>[ 1.266293] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops
> > > > >>>ipu_crtc_ops)
> > > > >>>[ 1.274027] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops
> > > > >>>ipu_crtc_ops)
> > > > >>>[ 1.282304] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller
> > > > >>>v1.30a with HDCP (DWC HDMI 3D TX PHY)
> > > > >>>[ 1.295722] imx-drm display-subsystem: bound 120000.hdmi (ops
> > > > >>>dw_hdmi_imx_ops)
> > > > >>>[ 1.373615] Console: switching to colour frame buffer device 128x48
> > > > >>>[ 1.396495] imx-drm display-subsystem: fb0: frame buffer device
> > > > >>>[ 1.404620] [drm] Initialized imx-drm 1.0.0 20120507 for
> > > > >>>display-subsystem on minor 1
> > > > >>>[ 1.412763] imx-ipuv3 2800000.ipu: IPUv3H probed
> > > > >>>[ 1.439673] brd: module loaded
> > > > >>>[ 1.469099] loop: module loaded
> > > > >>>[ 1.480324] nand: No NAND device found
> > > > >>>[ 1.487768] libphy: Fixed MDIO Bus: probed
> > > > >>>[ 1.493034] CAN device driver interface
> > > > >>>[ 1.499057] fec 2188000.ethernet: 2188000.ethernet supply phy not
> > > > >>>found, using dummy regulator
> > > > >>>[ 1.511633] pps pps0: new PPS source ptp0
> > > > >>>[ 1.516928] fec 2188000.ethernet (unnamed net_device)
> > > > >>>(uninitialized): Invalid MAC address: 00:00:00:00:00:00
> > > > >>>[ 1.527177] fec 2188000.ethernet (unnamed net_device)
> > > > >>>(uninitialized): Using random MAC address: f2:5a:6d:a6:90:74
> > > > >>>[ 1.543567] libphy: fec_enet_mii_bus: probed
> > > > >>>[ 1.549138] fec 2188000.ethernet eth0: registered PHC device 0
> > > > >>>[ 1.556499] usbcore: registered new interface driver asix
> > > > >>>[ 1.562066] usbcore: registered new interface driver ax88179_178a
> > > > >>>[ 1.568259] usbcore: registered new interface driver cdc_ether
> > > > >>>[ 1.574276] usbcore: registered new interface driver net1080
> > > > >>>[ 1.580097] usbcore: registered new interface driver cdc_subset
> > > > >>>[ 1.586144] usbcore: registered new interface driver zaurus
> > > > >>>[ 1.591910] usbcore: registered new interface driver cdc_ncm
> > > > >>>[ 1.597589] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> > > > >>>[ 1.604209] ehci-pci: EHCI PCI platform driver
> > > > >>>[ 1.608760] ehci-mxc: Freescale On-Chip EHCI Host driver
> > > > >>>[ 1.614851] usbcore: registered new interface driver usb-storage
> > > > >>>[ 1.629947] ci_hdrc ci_hdrc.0: EHCI Host Controller
> > > > >>>[ 1.635066] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
> > > > >>>[ 1.669473] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
> > > > >>>[ 1.677809] hub 1-0:1.0: USB hub found
> > > > >>>[ 1.681902] hub 1-0:1.0: 1 port detected
> > > > >>>[ 1.692839] ci_hdrc ci_hdrc.1: EHCI Host Controller
> > > > >>>[ 1.697791] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2
> > > > >>>[ 1.729537] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
> > > > >>>[ 1.736740] hub 2-0:1.0: USB hub found
> > > > >>>[ 1.740655] hub 2-0:1.0: 1 port detected
> > > > >>>[ 1.753468] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered
> > > > >>>20cc000.snvs:snvs-rtc-lp as rtc0
> > > > >>>[ 1.762976] i2c /dev entries driver
> > > > >>>[ 1.811339] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
> > > > >>>[ 1.817865] Bluetooth: HCI UART driver ver 2.3
> > > > >>>[ 1.822460] Bluetooth: HCI UART protocol H4 registered
> > > > >>>[ 1.828297] Bluetooth: HCI UART protocol LL registered
> > > > >>>[ 1.834774] sdhci: Secure Digital Host Controller Interface driver
> > > > >>>[ 1.841059] sdhci: Copyright(c) Pierre Ossman
> > > > >>>[ 1.845437] sdhci-pltfm: SDHCI platform and OF driver helper
> > > > >>>[ 1.852834] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO
> > > > >>>[ 1.893497] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc]
> > > > >>>using ADMA
> > > > >>>[ 1.937500] mmc1: SDHCI controller on 2198000.usdhc [2198000.usdhc]
> > > > >>>using ADMA
> > > > >>>[ 1.945049] mmc0: host does not support reading read-only switch,
> > > > >>>assuming write-enable
> > > > >>>[ 1.959799] mmc0: new high speed SDHC card at address 1234
> > > > >>>[ 1.968363] mmcblk0: mmc0:1234 SA04G 3.71 GiB
> > > > >>>[ 1.977984] caam 2100000.caam: Entropy delay = 3200
> > > > >>>[ 2.043796] caam 2100000.caam: Instantiated RNG4 SH0
> > > > >>>[ 2.104558] caam 2100000.caam: Instantiated RNG4 SH1
> > > > >>>[ 2.109596] caam 2100000.caam: device ID = 0x0a16010000000000 (Era 4)
> > > > >>>[ 2.116060] caam 2100000.caam: job rings = 2, qi = 0, dpaa2 = no
> > > > >>>[ 2.139266] caam algorithms registered in /proc/crypto
> > > > >>>[ 2.139341] mmcblk0: p1 p2
> > > > >>>[ 2.150910] caam_jr 2101000.jr0: registering rng-caam
> > > > >>>[ 2.157327] usbcore: registered new interface driver usbhid
> > > > >>>[ 2.163103] usbhid: USB HID core driver
> > > > >>>[ 2.171149] imx-media: subdev ov5640 2-003c bound
> > > > >>>[ 2.176631] imx-media: subdev ipu1_vdic bound
> > > > >>>[ 2.181640] imx-media: subdev ipu2_vdic bound
> > > > >>>[ 2.183831] mmc1: new high speed MMC card at address 0001
> > > > >>>[ 2.186357] imx-media: subdev ipu1_ic_prp bound
> > > > >>>[ 2.193649] mmcblk1: mmc1:0001 M62704 3.53 GiB
> > > > >>>[ 2.197342] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video0
> > > > >>>[ 2.202620] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB
> > > > >>>[ 2.208083] imx-media: subdev ipu1_ic_prpenc bound
> > > > >>>[ 2.215764] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB
> > > > >>>[ 2.219512] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video1
> > > > >>>[ 2.231868] imx-media: subdev ipu1_ic_prpvf bound
> > > > >>>[ 2.232186] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB,
> > > > >>>chardev (244:0)
> > > > >>>[ 2.236748] imx-media: subdev ipu2_ic_prp bound
> > > > >>>[ 2.245958] mmcblk1: p1 p2
> > > > >>>[ 2.251569] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video2
> > > > >>>[ 2.258696] imx-media: subdev ipu2_ic_prpenc bound
> > > > >>>[ 2.264108] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video3
> > > > >>>[ 2.271119] imx-media: subdev ipu2_ic_prpvf bound
> > > > >>>[ 2.277042] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video4
> > > > >>>[ 2.283312] imx-media: subdev ipu1_csi0 bound
> > > > >>>[ 2.288312] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video5
> > > > >>>[ 2.294583] imx-media: subdev ipu1_csi1 bound
> > > > >>>[ 2.299694] ipu2_csi0: Registered ipu2_csi0 capture as /dev/video6
> > > > >>>[ 2.305902] imx-media: subdev ipu2_csi0 bound
> > > > >>>[ 2.310953] ipu2_csi1: Registered ipu2_csi1 capture as /dev/video7
> > > > >>>[ 2.317162] imx-media: subdev ipu2_csi1 bound
> > > > >>>[ 2.322293] imx-media: subdev imx6-mipi-csi2 bound
> > > > >>>[ 2.336025] sgtl5000 2-000a: Error reading chip id -6
> > > > >>>[ 2.346932] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW
> > > > >>>[ 2.360345] NET: Registered protocol family 10
> > > > >>>[ 2.367761] Segment Routing with IPv6
> > > > >>>[ 2.371704] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
> > > > >>>[ 2.379180] NET: Registered protocol family 17
> > > > >>>[ 2.383872] can: controller area network core (rev 20170425 abi 9)
> > > > >>>[ 2.390281] NET: Registered protocol family 29
> > > > >>>[ 2.394756] can: raw protocol (rev 20170425)
> > > > >>>[ 2.399126] can: broadcast manager protocol (rev 20170425 t)
> > > > >>>[ 2.404869] can: netlink gateway (rev 20170425) max_hops=1
> > > > >>>[ 2.410989] Key type dns_resolver registered
> > > > >>>[ 2.420041] Registering SWP/SWPB emulation handler
> > > > >>>[ 2.426337] Loading compiled-in X.509 certificates
> > > > >>>[ 2.505422] imx-media: subdev ipu1_csi0_mux bound
> > > > >>>[ 2.511142] imx-media: subdev ipu2_csi1_mux bound
> > > > >>>[ 2.515930] imx-media: imx6-mipi-csi2:4 -> ipu2_csi1_mux:0
> > > > >>>[ 2.518384] random: fast init done
> > > > >>>[ 2.521600] imx-media: imx6-mipi-csi2:1 -> ipu1_csi0_mux:0
> > > > >>>[ 2.530561] imx-media: ov5640 2-003c:0 -> imx6-mipi-csi2:0
> > > > >>>[ 2.536094] imx-media: ipu2_csi1:1 -> ipu2_ic_prp:0
> > > > >>>[ 2.541052] imx-media: ipu2_csi1:1 -> ipu2_vdic:0
> > > > >>>[ 2.545801] imx-media: ipu2_csi1_mux:2 -> ipu2_csi1:0
> > > > >>>[ 2.550932] imx-media: ipu2_csi0:1 -> ipu2_ic_prp:0
> > > > >>>[ 2.555837] imx-media: ipu2_csi0:1 -> ipu2_vdic:0
> > > > >>>[ 2.560629] imx-media: imx6-mipi-csi2:3 -> ipu2_csi0:0
> > > > >>>[ 2.565800] imx-media: ipu1_csi1:1 -> ipu1_ic_prp:0
> > > > >>>[ 2.570750] imx-media: ipu1_csi1:1 -> ipu1_vdic:0
> > > > >>>[ 2.575497] imx-media: imx6-mipi-csi2:2 -> ipu1_csi1:0
> > > > >>>[ 2.580716] imx-media: ipu1_csi0:1 -> ipu1_ic_prp:0
> > > > >>>[ 2.585623] imx-media: ipu1_csi0:1 -> ipu1_vdic:0
> > > > >>>[ 2.590411] imx-media: ipu1_csi0_mux:2 -> ipu1_csi0:0
> > > > >>>[ 2.595499] imx-media: ipu2_ic_prp:1 -> ipu2_ic_prpenc:0
> > > > >>>[ 2.600901] imx-media: ipu2_ic_prp:2 -> ipu2_ic_prpvf:0
> > > > >>>[ 2.606159] imx-media: ipu1_ic_prp:1 -> ipu1_ic_prpenc:0
> > > > >>>[ 2.611548] imx-media: ipu1_ic_prp:2 -> ipu1_ic_prpvf:0
> > > > >>>[ 2.616803] imx-media: ipu2_vdic:2 -> ipu2_ic_prp:0
> > > > >>>[ 2.621754] imx-media: ipu1_vdic:2 -> ipu1_ic_prp:0
> > > > >>>[ 2.637015] imx_thermal tempmon: Industrial CPU temperature grade -
> > > > >>>max:105C critical:100C passive:95C
> > > > >>>[ 2.650475] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock
> > > > >>>to 1970-01-01 00:00:00 UTC (0)
> > > > >>>[ 2.659880] cfg80211: Loading compiled-in X.509 certificates for
> > > > >>>regulatory database
> > > > >>>[ 2.674031] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
> > > > >>>[ 2.682013] platform regulatory.0: Direct firmware load for
> > > > >>>regulatory.db failed with error -2
> > > > >>>[ 2.690851] cfg80211: failed to load regulatory.db
> > > > >>>[ 2.695737] ALSA device list:
> > > > >>>[ 2.698762] No soundcards found.
> > > > >>>[ 3.592224] EXT4-fs (mmcblk0p2): recovery complete
> > > > >>>[ 3.602020] EXT4-fs (mmcblk0p2): mounted filesystem with ordered
> > > > >>>data mode. Opts: (null)
> > > > >>>[ 3.610371] VFS: Mounted root (ext4 filesystem) on device 179:2.
> > > > >>>[ 3.618708] devtmpfs: mounted
> > > > >>>[ 3.624665] Freeing unused kernel memory: 1024K
> > > > >>>[ 3.743951] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
> > > > >>>Starting logging: OK
> > > > >>>Initializing random number generator... [ 3.897748] random: dd:
> > > > >>>uninitialized urandom read (512 bytes read)
> > > > >>>done.
> > > > >>>Starting network: OK
> > > > >>>
> > > > >>>Welcome to Engicam i.CoreM6 Quad/Dual/DualLite/Solo
> > > > >>>buildroot login: root
> > > > >>># media-ctl -l "'ov5640 2-003c':0 -> 'imx6-mipi-csi2':0[1]"
> > > > >>># media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]"
> > > > >>># media-ctl -l "'ipu1_csi1':1 -> 'ipu1_ic_prp':0[1]"
> > > > >>># media-ctl -l "'ipu1_ic_prp':1 -> 'ipu1_ic_prpenc':0[1]"
> > > > >>># media-ctl -l "'ipu1_ic_prpenc':1 -> 'ipu1_ic_prpenc capture':0[1]"
> > > > >>># media-ctl -V "'ov5640 2-003c':0 [fmt:UYVY2X8/640x480 field:none]"
> > > > >>># media-ctl -V "'imx6-mipi-csi2':2 [fmt:UYVY2X8/640x480 field:none]"
> > > > >>># media-ctl -V "'ipu1_csi1':1 [fmt:AYUV32/640x480 field:none]"
> > > > >>># media-ctl -V "'ipu1_ic_prp':1 [fmt:AYUV32/640x480 field:none]"
> > > > >>># media-ctl -V "'ipu1_ic_prpenc':1 [fmt:AYUV32/640x480 field:none]"
> > > > >>># med# media-ctl -p
> > > > >>>Media controller API version 4.17.0
> > > > >>>
> > > > >>>Media device information
> > > > >>>------------------------
> > > > >>>driver imx-media
> > > > >>>model imx-media
> > > > >>>serial
> > > > >>>bus info
> > > > >>>hw revision 0x0
> > > > >>>driver version 4.17.0
> > > > >>>
> > > > >>>Device topology
> > > > >>>- entity 1: ov5640 2-003c (1 pad, 1 link)
> > > > >>> type V4L2 subdev subtype Sensor flags 0
> > > > >>> device node name /dev/v4l-subdev0
> > > > >>>pad0: Source
> > > > >>>[fmt:UYVY8_2X8/640x480 field:none]
> > > > >>>-> "imx6-mipi-csi2":0 [ENABLED]
> > > > >>>
> > > > >>>- entity 3: ipu1_vdic (3 pads, 3 links)
> > > > >>> type V4L2 subdev subtype Unknown flags 0
> > > > >>> device node name /dev/v4l-subdev1
> > > > >>>pad0: Sink
> > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > >>><- "ipu1_csi0":1 []
> > > > >>><- "ipu1_csi1":1 []
> > > > >>>pad1: Sink
> > > > >>>[fmt:UYVY8_2X8/640x480 field:none]
> > > > >>>pad2: Source
> > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > >>>-> "ipu1_ic_prp":0 []
> > > > >>>
> > > > >>>- entity 7: ipu2_vdic (3 pads, 3 links)
> > > > >>> type V4L2 subdev subtype Unknown flags 0
> > > > >>> device node name /dev/v4l-subdev2
> > > > >>>pad0: Sink
> > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > >>><- "ipu2_csi0":1 []
> > > > >>><- "ipu2_csi1":1 []
> > > > >>>pad1: Sink
> > > > >>>[fmt:UYVY8_2X8/640x480 field:none]
> > > > >>>pad2: Source
> > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > >>>-> "ipu2_ic_prp":0 []
> > > > >>>
> > > > >>>- entity 11: ipu1_ic_prp (3 pads, 5 links)
> > > > >>> type V4L2 subdev subtype Unknown flags 0
> > > > >>> device node name /dev/v4l-subdev3
> > > > >>>pad0: Sink
> > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > >>><- "ipu1_vdic":2 []
> > > > >>><- "ipu1_csi0":1 []
> > > > >>><- "ipu1_csi1":1 [ENABLED]
> > > > >>>pad1: Source
> > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > >>>-> "ipu1_ic_prpenc":0 [ENABLED]
> > > > >>>pad2: Source
> > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > >>>-> "ipu1_ic_prpvf":0 []
> > > > >>>
> > > > >>>- entity 15: ipu1_ic_prpenc (2 pads, 2 links)
> > > > >>> type V4L2 subdev subtype Unknown flags 0
> > > > >>> device node name /dev/v4l-subdev4
> > > > >>>pad0: Sink
> > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > >>><- "ipu1_ic_prp":1 [ENABLED]
> > > > >>>pad1: Source
> > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > >>>-> "ipu1_ic_prpenc capture":0 [ENABLED]
> > > > >>>
> > > > >>>- entity 18: ipu1_ic_prpenc capture (1 pad, 1 link)
> > > > >>> type Node subtype V4L flags 0
> > > > >>> device node name /dev/video0
> > > > >>>pad0: Sink
> > > > >>><- "ipu1_ic_prpenc":1 [ENABLED]
> > > > >>>
> > > > >>>- entity 24: ipu1_ic_prpvf (2 pads, 2 links)
> > > > >>> type V4L2 subdev subtype Unknown flags 0
> > > > >>> device node name /dev/v4l-subdev5
> > > > >>>pad0: Sink
> > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > >>><- "ipu1_ic_prp":2 []
> > > > >>>pad1: Source
> > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > >>>-> "ipu1_ic_prpvf capture":0 []
> > > > >>>
> > > > >>>- entity 27: ipu1_ic_prpvf capture (1 pad, 1 link)
> > > > >>> type Node subtype V4L flags 0
> > > > >>> device node name /dev/video1
> > > > >>>pad0: Sink
> > > > >>><- "ipu1_ic_prpvf":1 []
> > > > >>>
> > > > >>>- entity 33: ipu2_ic_prp (3 pads, 5 links)
> > > > >>> type V4L2 subdev subtype Unknown flags 0
> > > > >>> device node name /dev/v4l-subdev6
> > > > >>>pad0: Sink
> > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > >>><- "ipu2_vdic":2 []
> > > > >>><- "ipu2_csi0":1 []
> > > > >>><- "ipu2_csi1":1 []
> > > > >>>pad1: Source
> > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > >>>-> "ipu2_ic_prpenc":0 []
> > > > >>>pad2: Source
> > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > >>>-> "ipu2_ic_prpvf":0 []
> > > > >>>
> > > > >>>- entity 37: ipu2_ic_prpenc (2 pads, 2 links)
> > > > >>> type V4L2 subdev subtype Unknown flags 0
> > > > >>> device node name /dev/v4l-subdev7
> > > > >>>pad0: Sink
> > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > >>><- "ipu2_ic_prp":1 []
> > > > >>>pad1: Source
> > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > >>>-> "ipu2_ic_prpenc capture":0 []
> > > > >>>
> > > > >>>- entity 40: ipu2_ic_prpenc capture (1 pad, 1 link)
> > > > >>> type Node subtype V4L flags 0
> > > > >>> device node name /dev/video2
> > > > >>>pad0: Sink
> > > > >>><- "ipu2_ic_prpenc":1 []
> > > > >>>
> > > > >>>- entity 46: ipu2_ic_prpvf (2 pads, 2 links)
> > > > >>> type V4L2 subdev subtype Unknown flags 0
> > > > >>> device node name /dev/v4l-subdev8
> > > > >>>pad0: Sink
> > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > >>><- "ipu2_ic_prp":2 []
> > > > >>>pad1: Source
> > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > >>>-> "ipu2_ic_prpvf capture":0 []
> > > > >>>
> > > > >>>- entity 49: ipu2_ic_prpvf capture (1 pad, 1 link)
> > > > >>> type Node subtype V4L flags 0
> > > > >>> device node name /dev/video3
> > > > >>>pad0: Sink
> > > > >>><- "ipu2_ic_prpvf":1 []
> > > > >>>
> > > > >>>- entity 55: ipu1_csi0 (3 pads, 4 links)
> > > > >>> type V4L2 subdev subtype Unknown flags 0
> > > > >>> device node name /dev/v4l-subdev9
> > > > >>>pad0: Sink
> > > > >>>[fmt:UYVY8_2X8/640x480 field:none
> > > > >>>crop.bounds:(0,0)/640x480
> > > > >>>crop:(0,0)/640x480
> > > > >>>compose.bounds:(0,0)/640x480
> > > > >>>compose:(0,0)/640x480]
> > > > >>><- "ipu1_csi0_mux":2 []
> > > > >>>pad1: Source
> > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > >>>-> "ipu1_ic_prp":0 []
> > > > >>>-> "ipu1_vdic":0 []
> > > > >>>pad2: Source
> > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > >>>-> "ipu1_csi0 capture":0 []
> > > > >>>
> > > > >>>- entity 59: ipu1_csi0 capture (1 pad, 1 link)
> > > > >>> type Node subtype V4L flags 0
> > > > >>> device node name /dev/video4
> > > > >>>pad0: Sink
> > > > >>><- "ipu1_csi0":2 []
> > > > >>>
> > > > >>>- entity 65: ipu1_csi1 (3 pads, 4 links)
> > > > >>> type V4L2 subdev subtype Unknown flags 0
> > > > >>> device node name /dev/v4l-subdev10
> > > > >>>pad0: Sink
> > > > >>>[fmt:UYVY8_2X8/640x480 field:none
> > > > >>>crop.bounds:(0,0)/640x480
> > > > >>>crop:(0,0)/640x480
> > > > >>>compose.bounds:(0,0)/640x480
> > > > >>>compose:(0,0)/640x480]
> > > > >>><- "imx6-mipi-csi2":2 [ENABLED]
> > > > >>>pad1: Source
> > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > >>>-> "ipu1_ic_prp":0 [ENABLED]
> > > > >>>-> "ipu1_vdic":0 []
> > > > >>>pad2: Source
> > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > >>>-> "ipu1_csi1 capture":0 []
> > > > >>>
> > > > >>>- entity 69: ipu1_csi1 capture (1 pad, 1 link)
> > > > >>> type Node subtype V4L flags 0
> > > > >>> device node name /dev/video5
> > > > >>>pad0: Sink
> > > > >>><- "ipu1_csi1":2 []
> > > > >>>
> > > > >>>- entity 75: ipu2_csi0 (3 pads, 4 links)
> > > > >>> type V4L2 subdev subtype Unknown flags 0
> > > > >>> device node name /dev/v4l-subdev11
> > > > >>>pad0: Sink
> > > > >>>[fmt:UYVY8_2X8/640x480 field:none
> > > > >>>crop.bounds:(0,0)/640x480
> > > > >>>crop:(0,0)/640x480
> > > > >>>compose.bounds:(0,0)/640x480
> > > > >>>compose:(0,0)/640x480]
> > > > >>><- "imx6-mipi-csi2":3 []
> > > > >>>pad1: Source
> > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > >>>-> "ipu2_ic_prp":0 []
> > > > >>>-> "ipu2_vdic":0 []
> > > > >>>pad2: Source
> > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > >>>-> "ipu2_csi0 capture":0 []
> > > > >>>
> > > > >>>- entity 79: ipu2_csi0 capture (1 pad, 1 link)
> > > > >>> type Node subtype V4L flags 0
> > > > >>> device node name /dev/video6
> > > > >>>pad0: Sink
> > > > >>><- "ipu2_csi0":2 []
> > > > >>>
> > > > >>>- entity 85: ipu2_csi1 (3 pads, 4 links)
> > > > >>> type V4L2 subdev subtype Unknown flags 0
> > > > >>> device node name /dev/v4l-subdev12
> > > > >>>pad0: Sink
> > > > >>>[fmt:UYVY8_2X8/640x480 field:none
> > > > >>>crop.bounds:(0,0)/640x480
> > > > >>>crop:(0,0)/640x480
> > > > >>>compose.bounds:(0,0)/640x480
> > > > >>>compose:(0,0)/640x480]
> > > > >>><- "ipu2_csi1_mux":2 []
> > > > >>>pad1: Source
> > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > >>>-> "ipu2_ic_prp":0 []
> > > > >>>-> "ipu2_vdic":0 []
> > > > >>>pad2: Source
> > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > >>>-> "ipu2_csi1 capture":0 []
> > > > >>>
> > > > >>>- entity 89: ipu2_csi1 capture (1 pad, 1 link)
> > > > >>> type Node subtype V4L flags 0
> > > > >>> device node name /dev/video7
> > > > >>>pad0: Sink
> > > > >>><- "ipu2_csi1":2 []
> > > > >>>
> > > > >>>- entity 95: imx6-mipi-csi2 (5 pads, 5 links)
> > > > >>> type V4L2 subdev subtype Unknown flags 0
> > > > >>> device node name /dev/v4l-subdev13
> > > > >>>pad0: Sink
> > > > >>>[fmt:UYVY8_2X8/640x480 field:none]
> > > > >>><- "ov5640 2-003c":0 [ENABLED]
> > > > >>>pad1: Source
> > > > >>>[fmt:UYVY8_2X8/640x480 field:none]
> > > > >>>-> "ipu1_csi0_mux":0 []
> > > > >>>pad2: Source
> > > > >>>[fmt:UYVY8_2X8/640x480 field:none]
> > > > >>>-> "ipu1_csi1":0 [ENABLED]
> > > > >>>pad3: Source
> > > > >>>[fmt:UYVY8_2X8/640x480 field:none]
> > > > >>>-> "ipu2_csi0":0 []
> > > > >>>pad4: Source
> > > > >>>[fmt:UYVY8_2X8/640x480 field:none]
> > > > >>>-> "ipu2_csi1_mux":0 []
> > > > >>>
> > > > >>>- entity 101: ipu1_csi0_mux (3 pads, 2 links)
> > > > >>> type V4L2 subdev subtype Unknown flags 0
> > > > >>> device node name /dev/v4l-subdev14
> > > > >>>pad0: Sink
> > > > >>>[fmt:unknown/0x0]
> > > > >>><- "imx6-mipi-csi2":1 []
> > > > >>>pad1: Sink
> > > > >>>[fmt:unknown/0x0]
> > > > >>>pad2: Source
> > > > >>>[fmt:unknown/0x0]
> > > > >>>-> "ipu1_csi0":0 []
> > > > >>>
> > > > >>>- entity 105: ipu2_csi1_mux (3 pads, 2 links)
> > > > >>> type V4L2 subdev subtype Unknown flags 0
> > > > >>> device node name /dev/v4l-subdev15
> > > > >>>pad0: Sink
> > > > >>>[fmt:unknown/0x0]
> > > > >>><- "imx6-mipi-csi2":4 []
> > > > >>>pad1: Sink
> > > > >>>[fmt:unknown/0x0]
> > > > >>>pad2: Source
> > > > >>>[fmt:unknown/0x0]
> > > > >>>-> "ipu2_csi1":0 []
> > > > >>>
> > > > >>># GST_DEBUG="v4l2*:5" gst-launch-1.0 -v v4l2src device=/dev/video1 ! \
> > > > >>>>autovideosink
> > > > >>>0:00:01.086281666 185 0x1dce880 DEBUG v4l2
> > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l1
> > > > >>>0:00:01.087369666 185 0x1dce880 DEBUG v4l2
> > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l5
> > > > >>>0:00:01.088496000 185 0x1dce880 DEBUG v4l2
> > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l.
> > > > >>>0:00:01.089540333 185 0x1dce880 DEBUG v4l2
> > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4lR
> > > > >>>0:00:01.090494666 185 0x1dce880 DEBUG v4l2
> > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4lH
> > > > >>>0:00:01.091657666 185 0x1dce880 DEBUG v4l2
> > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l4
> > > > >>>0:00:01.092745000 185 0x1dce880 DEBUG v4l2
> > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l
> > > > >>>0:00:01.093703333 185 0x1dce880 DEBUG v4l2
> > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l
> > > > >>>0:00:01.094854000 185 0x1dce880 DEBUG v4l2
> > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l
> > > > >>>0:00:01.095815000 185 0x1dce880 DEBUG v4l2
> > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l
> > > > >>>0:00:01.096818666 185 0x1dce880 DEBUG v4l2
> > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4lB
> > > > >>>0:00:01.097819000 185 0x1dce880 DEBUG v4l2
> > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l8
> > > > >>>0:00:01.098771000 185 0x1dce880 DEBUG v4l2
> > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l
> > > > >>>0:00:01.099798666 185 0x1dce880 DEBUG v4l2
> > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l1
> > > > >>>0:00:01.100776666 185 0x1dce880 DEBUG v4l2
> > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4lV
> > > > >>>0:00:01.101755333 185 0x1dce880 DEBUG v4l2
> > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4lY
> > > > >>>0:00:01.102771666 185 0x1dce880 DEBUG v4l2
> > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4lP
> > > > >>>0:00:01.103712000 185 0x1dce880 DEBUG v4l2
> > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l4
> > > > >>>0:00:01.104720000 185 0x1dce880 DEBUG v4l2
> > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4lO
> > > > >>>0:00:01.105697000 185 0x1dce880 DEBUG v4l2
> > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4lP
> > > > >>>0:00:01.106629666 185 0x1dce880 DEBUG v4l2
> > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l4
> > > > >>>0:00:01.107681666 185 0x1dce880 DEBUG v4l2
> > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l4
> > > > >>>0:00:01.108660666 185 0x1dce880 DEBUG v4l2
> > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l2
> > > > >>>0:00:01.442437333 185 0x1dce880 DEBUG v4l2
> > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l0
> > > > >>>0:00:01.444673333 185 0x1dce880 DEBUG v4l2
> > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l2
> > > > >>>0:00:01.446842000 185 0x1dce880 DEBUG v4l2
> > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l2
> > > > >>>0:00:01.449084000 185 0x1dce880 DEBUG v4l2
> > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l4
> > > > >>>Setting pipeline to PAUSED ...
> > > > >>>0:00:01.680823000 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:524:gst_v4l2_open:<v4l2src01
> > > > >>>0:00:01.681953333 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:69:gst_v4l2_get_capabilities
> > > > >>>0:00:01.683098666 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:140:gst_v4l2_fill_lists:<v4s
> > > > >>>0:00:01.684056666 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:143:gst_v4l2_fill_lists:<v4s
> > > > >>>0:00:01.685201000 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:215:gst_v4l2_fill_lists:<v4s
> > > > >>>0:00:01.686159333 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > > >>>0:00:01.687207666 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4C
> > > > >>>0:00:01.688183666 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > > >>>0:00:01.689155333 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4M
> > > > >>>0:00:01.690142000 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > > >>>0:00:01.691114000 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4P
> > > > >>>0:00:01.692080000 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > > >>>0:00:01.693073000 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4R
> > > > >>>0:00:01.694043000 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > > >>>0:00:01.695760000 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4L
> > > > >>>0:00:01.696736333 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > > >>>0:00:01.697708000 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4G
> > > > >>>0:00:01.698699000 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > > >>>0:00:01.699667000 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4H
> > > > >>>0:00:01.700633000 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > > >>>0:00:01.701623666 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4I
> > > > >>>0:00:01.702591000 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > > >>>0:00:01.703554333 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4K
> > > > >>>0:00:01.704604000 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > > >>>0:00:01.705576666 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4M
> > > > >>>0:00:01.706567000 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > > >>>0:00:02.040204667 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4B
> > > > >>>0:00:02.042194667 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > > >>>0:00:02.044190000 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4G
> > > > >>>0:00:02.046338333 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > > >>>0:00:02.048327667 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4H
> > > > >>>0:00:02.050296000 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > > >>>0:00:02.052385000 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4K
> > > > >>>0:00:02.054376000 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > > >>>0:00:02.056461333 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4L
> > > > >>>0:00:02.058434000 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > > >>>0:00:02.060423667 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4c
> > > > >>>0:00:02.062382667 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:263:gst_v4l2_fill_lists:<v4s
> > > > >>>0:00:02.064291333 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:283:gst_v4l2_fill_lists:<v40
> > > > >>>0:00:02.066224667 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:292:gst_v4l2_fill_lists:<v4.
> > > > >>>0:00:02.067190333 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:283:gst_v4l2_fill_lists:<v40
> > > > >>>0:00:02.068174333 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:300:gst_v4l2_fill_lists:<v40
> > > > >>>0:00:02.069141000 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:283:gst_v4l2_fill_lists:<v40
> > > > >>>0:00:02.070113000 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:305:gst_v4l2_fill_lists:<v4d
> > > > >>>0:00:02.071088333 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:456:gst_v4l2_fill_lists:<v4e
> > > > >>>0:00:02.072040000 185 0x1dce880 INFO v4l2
> > > > >>>v4l2_calls.c:592:gst_v4l2_open:<v4l2src0y
> > > > >>>0:00:02.073017333 185 0x1dce880 DEBUG v4l2
> > > > >>>gstv4l2object.c:804:gst_v4l2_set_default)
> > > > >>>0:00:02.074010667 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:740:gst_v4l2_get_norm:<v4l2m
> > > > >>>0:00:02.075021000 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:754:gst_v4l2_get_norm: Fail1
> > > > >>>0:00:02.076012000 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:1027:gst_v4l2_get_input:<v4t
> > > > >>>Pipeline is live and does not need PREROLL ...
> > > > >>>0:00:02.080105333 185 0x1ec39b0 DEBUG v4l2
> > > > >>>gstv4l2object.c:1109:gst_v4l2_object_fil.
> > > > >>><v4l2src0> getting src format enumerations
> > > > >>>0:00:02.412981333 185 0x1ec39b0 INFO New clock: GstSystemClock
> > > > >>> v4l2 gstv4l2object.c:1146:gst_v4l2_object_fill_format_list:<v4l2src0>
> > > > >>>got 7 format(s):
> > > > >>>0:00:02.415407667 185 0x1ec39b0 INFO v4l2
> > > > >>>gstv4l2object.c:1152:gst_v4l2_object_filV
> > > > >>>0:00:02.417531667 185 0x1ec39b0 INFO v4l2
> > > > >>>gstv4l2object.c:1152:gst_v4l2_object_filY
> > > > >>>0:00:02.419703667 185 0x1ec39b0 INFO v4l2
> > > > >>>gstv4l2object.c:1152:gst_v4l2_object_filP
> > > > >>>0:00:02.421860000 185 0x1ec39b0 INFO v4l2
> > > > >>>gstv4l2object.c:1152:gst_v4l2_object_fil2
> > > > >>>0:00:02.424022667 185 0x1ec39b0 INFO v4l2
> > > > >>>gstv4l2object.c:1152:gst_v4l2_object_fil2
> > > > >>>0:00:02.426295000 185 0x1ec39b0 INFO v4l2
> > > > >>>gstv4l2object.c:1152:gst_v4l2_object_fil6
> > > > >>>0:00:02.428481333 185 0x1ec39b0 INFO v4l2
> > > > >>>gstv4l2object.c:1152:gst_v4l2_object_fil2
> > > > >>>0:00:02.430728333 185 0x1ec39b0 DEBUG v4l2
> > > > >>>gstv4l2object.c:2564:gst_v4l2_object_proV
> > > > >>>0:00:02.432985333 185 0x1ec39b0 DEBUG v4l2
> > > > >>>gstv4l2object.c:2691:gst_v4l2_object_pro)
> > > > >>>0:00:02.436117000 185 0x1ec39b0 DEBUG v4l2
> > > > >>>gstv4l2object.c:2564:gst_v4l2_object_proY
> > > > >>>0:00:02.437252333 185 0x1ec39b0 DEBUG v4l2
> > > > >>>gstv4l2object.c:2691:gst_v4l2_object_pro)
> > > > >>>0:00:02.438579000 185 0x1ec39b0 DEBUG v4l2
> > > > >>>gstv4l2object.c:2564:gst_v4l2_object_proP
> > > > >>>0:00:02.439656000 185 0x1ec39b0 DEBUG v4l2
> > > > >>>gstv4l2object.c:2691:gst_v4l2_object_pro)
> > > > >>>0:00:02.441016667 185 0x1ec39b0 DEBUG v4l2
> > > > >>>gstv4l2object.c:2564:gst_v4l2_object_pro2
> > > > >>>0:00:02.442092333 185 0x1ec39b0 DEBUG v4l2
> > > > >>>gstv4l2object.c:2691:gst_v4l2_object_pro)
> > > > >>>0:00:02.443443333 185 0x1ec39b0 DEBUG v4l2
> > > > >>>gstv4l2object.c:2564:gst_v4l2_object_pro2
> > > > >>>0:00:02.444626667 185 0x1ec39b0 DEBUG v4l2
> > > > >>>gstv4l2object.c:2691:gst_v4l2_object_pro)
> > > > >>>0:00:02.445990667 185 0x1ec39b0 DEBUG v4l2
> > > > >>>gstv4l2object.c:2564:gst_v4l2_object_pro6
> > > > >>>0:00:02.447063667 185 0x1ec39b0 DEBUG v4l2
> > > > >>>gstv4l2object.c:2691:gst_v4l2_object_pro)
> > > > >>>0:00:02.448410333 185 0x1ec39b0 DEBUG v4l2
> > > > >>>gstv4l2object.c:2564:gst_v4l2_object_pro2
> > > > >>>0:00:02.782148333 185 0x1ec39b0 DEBUG v4l2
> > > > >>>gstv4l2object.c:2691:gst_v4l2_object_pro)
> > > > >>>0:00:02.785264333 185 0x1ec39b0 INFO v4l2
> > > > >>>gstv4l2object.c:3967:gst_v4l2_object_get}
> > > > >>>0:00:02.788800000 185 0x1ec39b0 DEBUG v4l2src
> > > > >>>gstv4l2src.c:300:gst_v4l2src_negotiate:<}
> > > > >>>0:00:02.792207000 185 0x1ec39b0 DEBUG v4l2src
> > > > >>>gstv4l2src.c:308:gst_v4l2src_negotiate:<]
> > > > >>>0:00:02.795419000 185 0x1ec39b0 DEBUG v4l2src
> > > > >>>gstv4l2src.c:316:gst_v4l2src_negotiate:<}
> > > > >>>0:00:03.132052667 185 0x1ec39b0 DEBUG v4l2src
> > > > >>>gstv4l2src.c:256:gst_v4l2src_fixate:<v4l}
> > > > >>>0:00:03.134399667 185 0x1ec39b0 DEBUG v4l2src
> > > > >>>gstv4l2src.c:282:gst_v4l2src_fixate:<v4l}
> > > > >>>0:00:03.136800667 185 0x1ec39b0 DEBUG v4l2src
> > > > >>>gstv4l2src.c:367:gst_v4l2src_negotiate:<1
> > > > >>>0:00:03.139067333 185 0x1ec39b0 DEBUG v4l2
> > > > >>>gstv4l2object.c:3887:gst_v4l2_object_stog
> > > > >>>0:00:03.141452000 185 0x1ec39b0 DEBUG v4l2
> > > > >>>gstv4l2object.c:3176:gst_v4l2_object_seto
> > > > >>>0:00:03.143608667 185 0x1ec39b0 DEBUG v4l2
> > > > >>>gstv4l2object.c:3310:gst_v4l2_object_set0
> > > > >>>0:00:03.146025333 185 0x1ec39b0 DEBUG v4l2
> > > > >>>gstv4l2object.c:3361:gst_v4l2_object_set1
> > > > >>>0:00:03.148229000 185 0x1ec39b0 DEBUG v4l2
> > > > >>>gstv4l2object.c:3370:gst_v4l2_object_set0
> > > > >>>0:00:03.150373667 185 0x1ec39b0 DEBUG v4l2
> > > > >>>gstv4l2object.c:3404:gst_v4l2_object_set1
> > > > >>>0:00:03.152589667 185 0x1ec39b0 DEBUG v4l2
> > > > >>>gstv4l2object.c:3414:gst_v4l2_object_set0
> > > > >>>0:00:03.155250667 185 0x1ec39b0 DEBUG v4l2
> > > > >>>gstv4l2object.c:3455:gst_v4l2_object_set1
> > > > >>>0:00:03.156584667 185 0x1ec39b0 DEBUG v4l2
> > > > >>>gstv4l2object.c:3472:gst_v4l2_object_set1
> > > > >>>0:00:03.157659333 185 0x1ec39b0 INFO v4l2
> > > > >>>gstv4l2object.c:3504:gst_v4l2_object_set1
> > > > >>>0:00:03.491432000 185 0x1ec39b0 DEBUG v4l2
> > > > >>>gstv4l2object.c:2960:gst_v4l2_object_ext0
> > > > >>>0:00:03.493645333 185 0x1ec39b0 DEBUG v4l2
> > > > >>>gstv4l2object.c:3071:gst_v4l2_object_sav0
> > > > >>>0:00:03.496027333 185 0x1ec39b0 DEBUG v4l2
> > > > >>>gstv4l2object.c:2843:gst_v4l2_object_setm
> > > > >>>0:00:03.498180000 185 0x1ec39b0 INFO v4l2
> > > > >>>gstv4l2object.c:2867:gst_v4l2_object_set2
> > > > >>>0:00:03.502772000 185 0x1ec39b0 DEBUG v4l2bufferpool
> > > > >>>gstv4l2bufferpool.c:509:gst_v4l2_buffer_;
> > > > >>>0:00:03.505283333 185 0x1ec39b0 INFO v4l2bufferpool
> > > > >>>gstv4l2bufferpool.c:557:gst_v4l2_buffer_2
> > > > >>>0:00:03.507120000 185 0x1ec39b0 INFO v4l2bufferpool
> > > > >>>gstv4l2bufferpool.c:570:gst_v4l2_buffer_2
> > > > >>>/GstPipeline:pipeline0/GstV4l2Src:v4l2src0.GstPad:src: caps =
> > > > >>>video/x-raw, format=(string)YUY2, width=(i1
> > > > >>>/GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0.GstGhostPad:sink.GstProxyPad:proxypad0:
> > > > >>>caps = vi1
> > > > >>>/GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0/GstKMSSink:autovideosink0-actual-sink-kms.GstPad:1
> > > > >>>0:00:03/GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0.GstGhostPad:sink:
> > > > >>>caps = video/x-raw, form1
> > > > >>>.512440000 185 0x1ec39b0 DEBUG v4l2
> > > > >>>gstv4l2object.c:3985:gst_v4l2_object_decide_alln
> > > > >>>0:00:03.513556667 185 0x1ec39b0 DEBUG v4l2
> > > > >>>gstv4l2object.c:4011:gst_v4l2_object_dec>
> > > > >>>0:00:03.514745667 185 0x1ec39b0 DEBUG v4l2
> > > > >>>gstv4l2object.c:4069:gst_v4l2_object_dec>
> > > > >>>0:00:03.515889000 185 0x1ec39b0 DEBUG v4l2
> > > > >>>gstv4l2object.c:4134:gst_v4l2_object_deca
> > > > >>>0:00:03.516969667 185 0x1ec39b0 DEBUG v4l2
> > > > >>>gstv4l2object.c:4143:gst_v4l2_object_dec;
> > > > >>>0:00:03.851350333 185 0x1ec39b0 DEBUG v4l2bufferpool
> > > > >>>gstv4l2bufferpool.c:509:gst_v4l2_buffer_2
> > > > >>>ams)NULL, options=(string)< GstBufferPoolOptionVideoMeta >;
> > > > >>>0:00:03.853620333 185 0x1ec39b0 INFO v4l2bufferpool
> > > > >>>gstv4l2bufferpool.c:570:gst_v4l2_buffer_2
> > > > >>>0:00:03.855780667 185 0x1ec39b0 DEBUG v4l2
> > > > >>>gstv4l2object.c:4150:gst_v4l2_object_dec;
> > > > >>>0:00:03.858430000 185 0x1ec39b0 DEBUG v4l2bufferpool
> > > > >>>gstv4l2bufferpool.c:509:gst_v4l2_buffer_;
> > > > >>>0:00:03.861572333 185 0x1ec39b0 DEBUG v4l2bufferpool
> > > > >>>gstv4l2bufferpool.c:707:gst_v4l2_buffer_l
> > > > >>>0:00:03.863468333 185 0x1ec39b0 DEBUG v4l2bufferpool
> > > > >>>gstv4l2bufferpool.c:737:gst_v4l2_buffer_s
> > > > >>>0:00:03.918861000 185 0x1ec39b0 DEBUG v4l2allocator
> > > > >>>gstv4l2allocator.c:706:gst_v4l2_allocatod
> > > > >>>0:00:03.943783333 185 0x1ec39b0 DEBUG v4l2bufferpool
> > > > >>>gstv4l2bufferpool.c:1389:gst_v4l2_buffer8
> > > > >>>0:00:03.946129333 185 0x1ec39b0 DEBUG v4l2bufferpool
> > > > >>>gstv4l2bufferpool.c:1389:gst_v4l2_buffer8
> > > > >>>0:00:03.948065000 185 0x1ec39b0 DEBUG v4l2bufferpool
> > > > >>>gstv4l2bufferpool.c:1389:gst_v4l2_buffer8
> > > > >>>0:00:03.950006000 185 0x1ec39b0 DEBUG v4l2bufferpool
> > > > >>>gstv4l2bufferpool.c:952:gst_v4l2_buffer_g
> > > > >>>0:00:03.996241333 185 0x1ec39b0 ERROR v4l2bufferpool
> > > > >>>gstv4l2bufferpool.c:641:gst_v4l2_buffer_)
> > > > >>>0:00:03.998199667 185 0x1ec39b0 DEBUG v4l2bufferpool
> > > > >>>gstv4l2bufferpool.c:1311:gst_v4l2_buffere
> > > > >>>0:00:04.000463000 185 0x1ec39b0 WARN v4l2bufferpool
> > > > >>>gstv4l2bufferpool.c:1064:gst_v4l2_buffer)
> > > > >>>0:00:04.004649333 185 0x1ec39b0 DEBUG v4l2bufferpool
> > > > >>>gstv4l2bufferpool.c:1283:gst_v4l2_bufferr
> > > > >>>0:00:04.005853333 185 0x1ec39b0 WARN v4l2src
> > > > >>>gstv4l2src.c:866:gst_v4l2src_create:<v4lr
> > > > >>>ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Could
> > > > >>>not read from resource.
> > > > >>>Additional debug info:
> > > > >>>gstv4l2bufferpool.c(1064): gst_v4l2_buffer_pool_poll ():
> > > > >>>/GstPipeline:pipeline0/GstV4l2Src:v4l2src0:
> > > > >>>poll error 1: Resource temporarily unavailable (11)
> > > > >>>Execution ended after 0:00:01.606871334
> > > > >>>Setting pipeline to PAUSED ...
> > > > >>>0:00:04.022385000 185 0x1dce880 DEBUG v4l2bufferpool
> > > > >>>gstv4l2bufferpool.c:931:gst_v4l2_buffer_g
> > > > >>>Setting pipeline to READY ...
> > > > >>>0:00:04.024850667 185 0x1dce880 DEBUG v4l2bufferpool
> > > > >>>gstv4l2bufferpool.c:879:gst_v4l2_buffer_l
> > > > >>>0:00:04.026764000 185 0x1dce880 DEBUG v4l2allocator
> > > > >>>gstv4l2allocator.c:757:gst_v4l2_allocator
> > > > >>>0:00:04.028598333 185 0x1dce880 DEBUG v4l2allocator
> > > > >>>gstv4l2allocator.c:765:gst_v4l2_allocatoe
> > > > >>>0:00:04.362785667 185 0x1dce880 WARN v4l2bufferpool
> > > > >>>gstv4l2bufferpool.c:918:gst_v4l2_buffer_g
> > > > >>>0:00:04.364712333 185 0x1dce880 DEBUG v4l2bufferpool
> > > > >>>gstv4l2bufferpool.c:952:gst_v4l2_buffer_g
> > > > >>>0:00:04.366504333 185 0x1dce880 DEBUG v4l2bufferpool
> > > > >>>gstv4l2bufferpool.c:629:gst_v4l2_buffer_g
> > > > >>>0:00:04.368607000 185 0x1dce880 DEBUG v4l2
> > > > >>>gstv4l2object.c:3887:gst_v4l2_object_stog
> > > > >>>0:00:04.370713333 185 0x1dce880 DEBUG v4l2
> > > > >>>gstv4l2object.c:3895:gst_v4l2_object_stol
> > > > >>>0:00:04.372809333 185 0x1dce880 DEBUG v4l2bufferpool
> > > > >>>gstv4l2bufferpool.c:931:gst_v4l2_buffer_g
> > > > >>>0:00:04.374732000 185 0x1dce880 DEBUG v4l2bufferpool
> > > > >>>gstv4l2bufferpool.c:879:gst_v4l2_buffer_l
> > > > >>>0:00:04.376541000 185 0x1dce880 DEBUG v4l2bufferpool
> > > > >>>gstv4l2bufferpool.c:663:gst_v4l2_buffer_g
> > > > >>>0:00:04.378334000 185 0x1dce880 DEBUG v4l2allocator
> > > > >>>gstv4l2allocator.c:757:gst_v4l2_allocator
> > > > >>>Setting pipeline to NULL ...
> > > > >>>0:00:04.394764333 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:716:gst_v4l2_close:<v4l2src1
> > > > >>>0:00:04.395897667 185 0x1dce880 DEBUG v4l2
> > > > >>>v4l2_calls.c:464:gst_v4l2_empty_lists:<vs
> > > > >>>Freeing pipeline ...
> > > > >>>
> > > > >>>[1] https://linuxtv.org/downloads/v4l-dvb-apis/v4l-drivers/imx.html#sabresd-with-mipi-csi-2-ov5640
> > > > >>>[2] https://paste.ubuntu.com/p/CTvFqdbyMW/
> > > > >>>
> > > > >>>Jagan.
> > > > >>>
> > > > >>>--
> > > > >>>Jagan Teki
> > > > >>>Senior Linux Kernel Engineer | Amarula Solutions
> > > > >>>U-Boot, Linux | Upstream Maintainer
> > > > >>>Hyderabad, India.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
2018-10-22 11:33 ` jacopo mondi
@ 2018-10-22 12:25 ` Adam Ford
2018-10-22 12:40 ` Fabio Estevam
0 siblings, 1 reply; 38+ messages in thread
From: Adam Ford @ 2018-10-22 12:25 UTC (permalink / raw)
To: jacopo
Cc: steve_longerbeam, Jagan Teki, p.zabel, Fabio Estevam,
gstreamer-devel, linux-media, Linux Kernel Mailing List
On Mon, Oct 22, 2018 at 6:33 AM jacopo mondi <jacopo@jmondi.org> wrote:
>
> Hi Adam,
>
> On Fri, Oct 19, 2018 at 02:42:56PM -0500, Adam Ford wrote:
> > On Fri, Oct 19, 2018 at 8:45 AM Adam Ford <aford173@gmail.com> wrote:
> > >
> > > On Wed, Oct 17, 2018 at 3:01 AM jacopo mondi <jacopo@jmondi.org> wrote:
> > > >
> > > > Hi Adam, Seve,
> > > >
> > > > On Tue, Oct 16, 2018 at 05:13:24PM -0700, Steve Longerbeam wrote:
> > > > > Hi Adam,
> > > > >
> > > > >
> > > > > On 10/16/18 12:46 PM, Adam Ford wrote:
> > > > > >On Thu, Sep 20, 2018 at 9:58 AM jacopo mondi <jacopo@jmondi.org> wrote:
> > > > > >>Hi imx6 people,
> > > > > >>
> > > > > >>On Thu, May 31, 2018 at 08:39:20PM +0530, Jagan Teki wrote:
> > > > > >>>Hi All,
> > > > > >>>
> > > > > >>>I'm trying to verify MIPI-CSI2 OV5640 camera on i.MX6 platform with
> > > > > >>>Mainline Linux.
> > > > > >>Sorry to resurect this, but before diving deep into details, do anyone
> > > > > >>of you verified JPEG capture with ov5640 and i.MX6 platforms, and has
> > > > > >>maybe a pipeline configuration to share :) ?
> > > > > >
> > > > > >I have a 4.14 kernel for my i.MX6D/Q using an ov5640 connected in a
> > > > > >similar way as the sabresd and I'm getting similar timeouts.
> > > > > >when executing
> > > > > >
> > > > > >media-ctl -l "'ov5640 2-0010':0 -> 'imx6-mipi-csi2':0[1]"
> > > > > >media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]"
> > > > >
> > > > >
> > > > > You're routing through imx6-mipi-csi2 pad 2, which is CSI-2 virtual
> > > > > channel 1, so make sure the ov5640 is transmitting on that channel,
> > > > > see virtual_channel module parameter.
> > >
> > > First, I want to apologize for the spam. I don't normally want to ask
> > > for hand-holding, but after spending 4 solid days on this, I'm getting
> > > frustrated, and I've tried to read the instructions, and the technical
> > > reference manual is huge and somewhat overwhelming.
> > >
> > > Once I get my hardware working and I develop a better understanding of
> > > how this system works, I'll be more than happy to volunteer to help
> > > test patches on my hardware.
> > >
> > > I am not sure I fully understand how the media-ctl handles the
> > > routing. I just basically copied what I could find from some
> > > documentation. I looked for some documentation but I wasn't able to
> > > find much. Maybe you can point me to some.
> > >
> > > I can share with you some of my device tree, and I'll try to explain
> > > my connections. Firstly, I have an i.MX6Q and i.MX6Q which share the
> > > same device tree.
> > >
> > > The CSI pins on the OV5640 camera go to i.MX6 pins:
> > > CSI_CLK0M / CSI_CLK0P,
> > > CSI_D0M / CSI_D0P,
> > > CSI_D1M / CSI_D1P,
> > >
> > > CSI_D2 and D3 pins on the processor are all floating, and CSI_REXT is
> > > grounded through a 6.04k pull-down resistor.
> > >
> > > I am not sure if these technically translate to CSI0, CSI1, or CSI2,
> > > but I assumed the CSI2 since that's how the SabreSD board appears to
> > > work.
> > >
> > > The ov5640 is connected to i2c3 with the following tree entry:
> > >
> > > ov5640: camera@10 {
> > > compatible = "ovti,ov5640";
> > > pinctrl-names = "default";
> > > pinctrl-0 = <&pinctrl_ov5640>;
> > > reg = <0x10>;
> > > clocks = <&clks IMX6QDL_CLK_CKO>;
> > > clock-names = "xclk";
> > > DOVDD-supply = <&mipi_pwr>;
> > > AVDD-supply = <&mipi_pwr>;
> > > DVDD-supply = <&mipi_pwr>;
> > > reset-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
> > > powerdown-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
> > >
> > > port {
> > > ov5640_to_mipi_csi2: endpoint {
> > > remote-endpoint = <&mipi_csi2_in>;
> > > clock-lanes = <0>;
> > > data-lanes = <1 2>;
> > > };
> > > };
> > >
> > > I will be the first person to admit, I don't understand how the
> > > clock-lands and data-lanes interact with the mipi_csis and the camera,
> > > but I tried to match the sabresd board device tree.
> > >
> > > For the MIPI_CSI interface, I wasn't sure which ports are the proper
> > > reference. Looking at the sabresd board, I used it as an example. I
> > > wasn't sure if port0 and reg 0 were the right options.
> > > &mipi_csi {
> > > status = "okay";
> > >
> > > port@0 {
> > > reg = <0>;
> > > mipi_csi2_in: endpoint {
> > > remote-endpoint = <&ov5640_to_mipi_csi2>;
> > > clock-lanes = <0>;
> > > data-lanes = <1 2>;
> > > };
> > > };
> > > };
> > >
> > > There was one section of the sabresd board that I wasn't sure I
> > > needed, because I am new to this camera stuff. I wasn't thinking I
> > > needed it, but I copied it because the sabresd board had it. I know
> > > it has two cameras, but the interaction between the csi interface and
> > > the ipu isn't clear to me.
> > >
> > > &ipu1_csi1_from_mipi_vc1 {
> > > clock-lanes = <0>;
> > > data-lanes = <1 2>;
> > > };
> > >
> > >
> > > I am not 100% certain the following is correct, but I tried to disable
> > > unwanted features to help save power, but it's quite possible it's
> > > interfering with the settings i have above.
> > >
> > > &ipu1_csi0 {
> > > status = "disabled";
> > > };
> > >
> > > &ipu2_csi0 {
> > > status = "disabled";
> > > };
> > >
> > > &mipi_dsi {
> > > status = "disabled";
> > > };
> > >
> > >
> > > > >
> > > > >
> > > > > >media-ctl -l "'ipu1_csi1':1 -> 'ipu1_ic_prp':0[1]"
> > > > > >media-ctl -l "'ipu1_ic_prp':1 -> 'ipu1_ic_prpenc':0[1]"
> > > > > >media-ctl -l "'ipu1_ic_prpenc':1 -> 'ipu1_ic_prpenc capture':0[1]"
> > > > > >
> > > > > >
> > > > > >media-ctl -V "'ov5640 2-0010':0 [fmt:UYVY2X8/640x480 field:none]"
> > > > > >media-ctl -V "'imx6-mipi-csi2':2 [fmt:UYVY2X8/640x480 field:none]"
> > > > > >media-ctl -V "'ipu1_csi1':1 [fmt:AYUV32/640x480 field:none]"
> > > > > >media-ctl -V "'ipu1_ic_prp':1 [fmt:AYUV32/640x480 field:none]"
> > > > > >media-ctl -V "'ipu1_ic_prpenc':1 [fmt:AYUV32/640x480 field:none]"
> > > > > >
> > > > > >
> > > > > > gst-launch-1.0 -v v4l2src num-buffers=1 device=/dev/video0 ! jpegenc
> > > > > >! filesink location=test.jpg
> > > >
> > > > Thanks, am I wrong or jpegenc is a software JPEG encoder?
> > > >
> > > > I was interested in options for capturing the JPEG frames as produced
> > > > by the sensor. I'm not even sure it is possible at all.
> > >
> > > I am ok with simple streaming to the screen. I'm ok with converting
> > > to video. At this point, I'm trying to just simply see the camera
> > > work. :-)
> > >
> > > >
> > > > > >
> > > > > >[ 72.799015] ipu1_ic_prpenc: EOF timeout
> > > > > >[ 73.838985] ipu1_ic_prpenc: wait last EOF timeout
> > > > > >
> > > > > >When I try to jump directly to 4.19-RC8, I get errors regarding memory
> > > > > >allocation, so I think there might be something else there I am
> > > > > >missing.
> > > > > >
> > > >
> >
> > On startup the system shows the following linking the ov5640 to the imx6.
> >
> > [ 7.301223] ov5640 2-0010: Linked as a consumer to regulator.17
> > [ 7.316817] coda 2040000.vpu: codec registered as /dev/video[8-9]
> > [ 7.365485] imx-media: subdev ov5640 2-0010 bound
> > [ 7.371381] imx-media: ov5640 2-0010:0 -> imx6-mipi-csi2:0
> > [ 7.383666] imx-media: imx6-mipi-csi2:4 -> ipu2_csi1_mux:0
> > [ 7.398218] imx-media: imx6-mipi-csi2:1 -> ipu1_csi0_mux:0
> > [ 7.404929] imx-media: ipu2_csi1:1 -> ipu2_ic_prp:0
> > [ 7.411899] imx-media: ipu2_csi1:1 -> ipu2_vdic:0
> > [ 7.418117] imx-media: ipu2_csi1_mux:2 -> ipu2_csi1:0
> > [ 7.424567] imx-media: ipu2_csi0:1 -> ipu2_ic_prp:0
> > [ 7.430350] imx-media: ipu2_csi0:1 -> ipu2_vdic:0
> > [ 7.437033] imx-media: imx6-mipi-csi2:3 -> ipu2_csi0:0
> > [ 7.442679] imx-media: ipu1_csi1:1 -> ipu1_ic_prp:0
> > [ 7.447742] imx-media: ipu1_csi1:1 -> ipu1_vdic:0
> > [ 7.452532] imx-media: imx6-mipi-csi2:2 -> ipu1_csi1:0
> > [ 7.457892] imx-media: ipu1_csi0:1 -> ipu1_ic_prp:0
> > [ 7.462815] imx-media: ipu1_csi0:1 -> ipu1_vdic:0
> > [ 7.467693] imx-media: ipu1_csi0_mux:2 -> ipu1_csi0:0
> > [ 7.472799] imx-media: ipu2_ic_prp:1 -> ipu2_ic_prpenc:0
> > [ 7.478304] imx-media: ipu2_ic_prp:2 -> ipu2_ic_prpvf:0
> > [ 7.483679] imx-media: ipu1_ic_prp:1 -> ipu1_ic_prpenc:0
> > [ 7.489043] imx-media: ipu1_ic_prp:2 -> ipu1_ic_prpvf:0
> > [ 7.494479] imx-media: ipu2_vdic:2 -> ipu2_ic_prp:0
> > [ 7.499468] imx-media: ipu1_vdic:2 -> ipu1_ic_prp:0
> >
> >
> > > > Please share the errors. I am using v4.19-rc7 without issues.
> >
> > For the folllwing example, I am just trying to stream to a fakesink,
> > toward the bottom, there are a couple errors ''Failed to allocate
> > required memory' and 'Buffer pool activation failed'.
> >
> >
> > # gst-launch-1.0 --gst-debug=v4l2src:5 v4l2src device=/dev/video0 ! fakesink
> > Setting pipeline to PAUSED ...
> > Pipeline is live and does not need PREROLL ...
> > 0:00:03.541852667 264 0xd5b600 DEBUG v4l2src
> > gstv4l2src.c:512:gst_v4l2src_negotiate:<v4l2src0> caps of src:
> > video/x-raw, format=(string)YUY2, framerate=(fraction)25/1,
> > width=(int)640, h
> > eight=(int)480; video/x-raw, format=(string)UYVY,
> > framerate=(fraction)25/1, width=(int)640, height=(int)480;
> > video/x-raw, format=(stri[ 218.912460] ipu1_ic_prpenc: pipeline start
> > failed with -32
> > ng)Y42B, framerate=(fraction)25/1, width=(int)640, height=(int)480;
> > video/x-raw, format=(string)I420, framerate=(fraction)25/1,
> > width=(int)640, height=(int)480; video/x-raw, format=(string)YV12,
> > framerate
> > =(fraction)25/1, width=(int)640, height=(int)480; video/x-raw,
> > format=(string)NV16, framerate=(fraction)25/1, width=(int)640,
> > height=(int)480; video/x-raw, format=(string)NV12,
> > framerate=(fraction)25/1, w
> > idth=(int)640, height=(int)480
> > 0:00:03.542103334 264 0xd5b600 DEBUG v4l2src
> > gstv4l2src.c:520:gst_v4l2src_negotiate:<v4l2src0> caps of peer: ANY
> > 0:00:03.542328667 264 0xd5b600 DEBUG v4l2src
> > gstv4l2src.c:403:gst_v4l2src_fixate:<v4l2src0> fixating caps
> > video/x-raw, format=(string)YUY2, framerate=(fraction)25/1,
> > width=(int)640, hei
> > ght=(int)480; video/x-raw, format=(string)UYVY,
> > framerate=(fraction)25/1, width=(int)640, height=(int)480;
> > video/x-raw, format=(string)Y42B, framerate=(fraction)25/1,
> > width=(int)640, height=(int)480; vide
> > o/x-raw, format=(string)I420, framerate=(fraction)25/1,
> > width=(int)640, height=(int)480; video/x-raw, format=(string)YV12,
> > framerate=(fraction)25/1, width=(int)640, height=(int)480;
> > video/x-raw, format=(s
> > tring)NV16, framerate=(fraction)25/1, width=(int)640, height=(int)480;
> > video/x-raw, format=(string)NV12, framerate=(fraction)25/1,
> > width=(int)640, height=(int)480
> > 0:00:03.542499667 264 0xd5b600 DEBUG v4l2src
> > gstv4l2src.c:418:gst_v4l2src_fixate:<v4l2src0> Prefered size 3840x2160
> > Setting pipeline to PLAYING ...
> > 0:00:03.543068334 264 0xd5b600 DEBUG v4l2src
> > gstv4l2src.c:435:gst_v4l2src_fixate:<v4l2src0> sorted and normalized
> > caps video/x-raw, format=(string)YUY2, framerate=(fraction)25/1,
> > width=
> > (int)640, height=(int)480; video/x-raw, format=(string)UYVY,
> > framerate=(fraction)25/1, width=(int)640, height=(int)480;
> > video/x-raw, format=(string)Y42B, framerate=(fraction)25/1,
> > width=(int)640, height=(
> > int)480; video/x-raw, format=(string)I420, framerate=(fraction)25/1,
> > width=(int)640, height=(int)480; video/x-raw, format=(string)YV12,
> > framerate=(fraction)25/1, width=(int)640, height=(int)480; video/x-r
> > aw, format=(string)NV16, framerate=(fraction)25/1, width=(int)640,
> > height=(int)480; video/x-raw, format=(string)NV12,
> > framerate=(fraction)25/1, width=(int)640, height=(int)480
> > New clock: GstSystemClock
> > 0:00:03.544924000 264 0xd5b600 DEBUG v4l2src
> > gstv4l2src.c:497:gst_v4l2src_fixate:<v4l2src0> fixated caps
> > video/x-raw, format=(string)YUY2, framerate=(fraction)25/1,
> > width=(int)640, heig
> > ht=(int)480, colorimetry=(string)bt601, interlace-mode=(string)progressive
> > 0:00:03.545072334 264 0xd5b600 DEBUG v4l2src
> > gstv4l2src.c:550:gst_v4l2src_negotiate:<v4l2src0> fixated to:
> > video/x-raw, format=(string)YUY2, framerate=(fraction)25/1,
> > width=(int)640, he
> > ight=(int)480, colorimetry=(string)bt601, interlace-mode=(string)progressive
> > 0:00:03.582344000 264 0xd5b600 WARN v4l2src
> > gstv4l2src.c:658:gst_v4l2src_decide_allocation:<v4l2src0> error:
> > Failed to allocate required memory.
> > 0:00:03.582701667 264 0xd5b600 WARN v4l2src
> > gstv4l2src.c:658:gst_v4l2src_decide_allocation:<v4l2src0> error:
> > Buffer pool activation failed
> > ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Failed
> > to allocate required memory.
> > Additional debug info:
> > gstv4l2src.c(658): gst_v4l2src_decide_allocation ():
> > /GstPipeline:pipeline0/GstV4l2Src:v4l2src0:
> > Buffer pool activation failed
> > Execution ended after 0:00:00.039860000
> > Setting pipeline to PAUSED ...
> > Setting pipeline to READY ...
> > Setting pipeline to NULL ...
> > Freeing pipeline ...
> > #
> >
> >
> >
> >
> > I configured the pipeline as follows:
> > media-ctl -l "'ov5640 2-0010':0 -> 'imx6-mipi-csi2':0[1]"
> > media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]"
> > media-ctl -l "'ipu1_csi1':1 -> 'ipu1_ic_prp':0[1]"
> > media-ctl -l "'ipu1_ic_prp':1 -> 'ipu1_ic_prpenc':0[1]"
> > media-ctl -l "'ipu1_ic_prpenc':1 -> 'ipu1_ic_prpenc capture':0[1]"
> >
> > I am hoping I am doing this correctly.
> >
>
> I admit I have copied the pipeline setup script I used from Jagan's website
> #https://openedev.amarulasolutions.com/display/ODWIKI/i.CoreM6+1.5#i.CoreM61.5-MIPI-CSI2OV5640Camera
>
Thank you! This tutorial web site is exactly what I need. The
documentation page in Linux touched on the media-ctl links, but it
didn't explain the syntax or the mapping. This graphical
interpretation really helps it make more sense.
adam
> Here it is for reference:
>
> media-ctl --links "'ov5640 2-003c':0->'imx6-mipi-csi2':0[1]"
> media-ctl --links "'imx6-mipi-csi2':1->'ipu1_csi0_mux':0[1]"
> media-ctl --links "'ipu1_csi0_mux':2->'ipu1_csi0':0[1]"
> media-ctl --links "'ipu1_csi0':2->'ipu1_csi0 capture':0[1]"
>
> media-ctl --set-v4l2 "'ov5640 2-003c':0[fmt:UYVY2X8/640x480 field:none]"
> media-ctl --set-v4l2 "'imx6-mipi-csi2':1[fmt:UYVY2X8/640x480 field:none]"
> media-ctl --set-v4l2 "'ipu1_csi0_mux':2[fmt:UYVY2X8/640x480 field:none]"
> media-ctl --set-v4l2 "'ipu1_csi0':2[fmt:AYUV32/640x480 field:none]"
>
> gst-launch-1.0 -v v4l2src device=/dev/video4 ! fakesink
>
> Hope it helps
>
>
> > adam
> >
> > > >
> > > > > >Has anyone tried this camera module on a 4.14 kernel? I noticed there
> > > > > >are a bunch of driver updates, and I was hoping there might be some
> > > > > >patches that could be be backported to the 4.14.y stable branch.
> > > > >
> > > > > I would suggest backporting all the ov5640 commits. You can also
> > > > > backport the imx-media commits, but that shouldn't be the cause
> > > > > of the timeouts you are seeing.
> > > > >
> > > >
> > > > Yes, try to backport the recent ov5640 developments on your kernel
> > > > version. There are a lot of fixes there, and I don't think there is
> > > > any dependency on new developments on the v4l2 framework you don't
> > > > have in v4.14 (I might be wrong though).
> > >
> > > I ported the entire ov5640 driver, but there appear to be some v4l
> > > changes which preclude me from copying the whole driver. I was hoping
> > > to use as close to stock 4.14 LTS kernel since 4.19 isn't quite done
> > > yet. (I 'think' 4.19 will be an LTS kernel if I'm not mistaken, so
> > > this kernel is open for discussion if we must transition to it)
> > >
> > > My i.MX6 board is running some tests now, but I'll try to build
> > > 4.19-rc8 and share some logs.
> > > >
> > > > In case something breaks when cherry-picking patches or when building,
> > > > please share and someone might help (I have recently backported those
> > > > changes to a v3.14 kernel, so I might help too).
> > >
> > > I first went through the git commit logs for the ov5640 and tried to
> > > grab anything with the word 'fix' in the headlines. I'll try this
> > > afternoon, to get a better feeling for which fixes were ported. In
> > > theory, I can go and request certain fixes to be backported too, but I
> > > want to make sure they actually work before I waste people's time.
> > >
> > > adam
> > >
> > > >
> > > > Thanks
> > > > j
> > > >
> > > > >
> > > > > Steve
> > > > >
> > > > >
> > > > >
> > > > > >
> > > > > >thanks for any suggestions to try.
> > > > > >
> > > > > >adam
> > > > > >
> > > > > >>Thanks
> > > > > >> j
> > > > > >>
> > > > > >>>I've followed these[1] instructions to configure MC links and pads
> > > > > >>>based on the probing details from dmesg and trying to capture
> > > > > >>>ipu1_ic_prpenc capture (/dev/video1) but it's not working.
> > > > > >>>
> > > > > >>>Can anyone help me to verify whether I configured all the details
> > > > > >>>properly if not please suggest.
> > > > > >>>
> > > > > >>>I'm pasting full log here, so-that anyone can comment in line and dt
> > > > > >>>changes are at [2]
> > > > > >>>
> > > > > >>>Log:
> > > > > >>>-----
> > > > > >>>
> > > > > >>>[ 1.211866] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0
> > > > > >>>[ 1.220211] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 0
> > > > > >>>[ 1.230344] imx-ipuv3 2400000.ipu: IPUv3H probed
> > > > > >>>[ 1.237170] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> > > > > >>>[ 1.243920] [drm] No driver support for vblank timestamp query.
> > > > > >>>[ 1.250831] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops
> > > > > >>>ipu_crtc_ops)
> > > > > >>>[ 1.258503] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops
> > > > > >>>ipu_crtc_ops)
> > > > > >>>[ 1.266293] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops
> > > > > >>>ipu_crtc_ops)
> > > > > >>>[ 1.274027] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops
> > > > > >>>ipu_crtc_ops)
> > > > > >>>[ 1.282304] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller
> > > > > >>>v1.30a with HDCP (DWC HDMI 3D TX PHY)
> > > > > >>>[ 1.295722] imx-drm display-subsystem: bound 120000.hdmi (ops
> > > > > >>>dw_hdmi_imx_ops)
> > > > > >>>[ 1.373615] Console: switching to colour frame buffer device 128x48
> > > > > >>>[ 1.396495] imx-drm display-subsystem: fb0: frame buffer device
> > > > > >>>[ 1.404620] [drm] Initialized imx-drm 1.0.0 20120507 for
> > > > > >>>display-subsystem on minor 1
> > > > > >>>[ 1.412763] imx-ipuv3 2800000.ipu: IPUv3H probed
> > > > > >>>[ 1.439673] brd: module loaded
> > > > > >>>[ 1.469099] loop: module loaded
> > > > > >>>[ 1.480324] nand: No NAND device found
> > > > > >>>[ 1.487768] libphy: Fixed MDIO Bus: probed
> > > > > >>>[ 1.493034] CAN device driver interface
> > > > > >>>[ 1.499057] fec 2188000.ethernet: 2188000.ethernet supply phy not
> > > > > >>>found, using dummy regulator
> > > > > >>>[ 1.511633] pps pps0: new PPS source ptp0
> > > > > >>>[ 1.516928] fec 2188000.ethernet (unnamed net_device)
> > > > > >>>(uninitialized): Invalid MAC address: 00:00:00:00:00:00
> > > > > >>>[ 1.527177] fec 2188000.ethernet (unnamed net_device)
> > > > > >>>(uninitialized): Using random MAC address: f2:5a:6d:a6:90:74
> > > > > >>>[ 1.543567] libphy: fec_enet_mii_bus: probed
> > > > > >>>[ 1.549138] fec 2188000.ethernet eth0: registered PHC device 0
> > > > > >>>[ 1.556499] usbcore: registered new interface driver asix
> > > > > >>>[ 1.562066] usbcore: registered new interface driver ax88179_178a
> > > > > >>>[ 1.568259] usbcore: registered new interface driver cdc_ether
> > > > > >>>[ 1.574276] usbcore: registered new interface driver net1080
> > > > > >>>[ 1.580097] usbcore: registered new interface driver cdc_subset
> > > > > >>>[ 1.586144] usbcore: registered new interface driver zaurus
> > > > > >>>[ 1.591910] usbcore: registered new interface driver cdc_ncm
> > > > > >>>[ 1.597589] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> > > > > >>>[ 1.604209] ehci-pci: EHCI PCI platform driver
> > > > > >>>[ 1.608760] ehci-mxc: Freescale On-Chip EHCI Host driver
> > > > > >>>[ 1.614851] usbcore: registered new interface driver usb-storage
> > > > > >>>[ 1.629947] ci_hdrc ci_hdrc.0: EHCI Host Controller
> > > > > >>>[ 1.635066] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
> > > > > >>>[ 1.669473] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
> > > > > >>>[ 1.677809] hub 1-0:1.0: USB hub found
> > > > > >>>[ 1.681902] hub 1-0:1.0: 1 port detected
> > > > > >>>[ 1.692839] ci_hdrc ci_hdrc.1: EHCI Host Controller
> > > > > >>>[ 1.697791] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2
> > > > > >>>[ 1.729537] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
> > > > > >>>[ 1.736740] hub 2-0:1.0: USB hub found
> > > > > >>>[ 1.740655] hub 2-0:1.0: 1 port detected
> > > > > >>>[ 1.753468] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered
> > > > > >>>20cc000.snvs:snvs-rtc-lp as rtc0
> > > > > >>>[ 1.762976] i2c /dev entries driver
> > > > > >>>[ 1.811339] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
> > > > > >>>[ 1.817865] Bluetooth: HCI UART driver ver 2.3
> > > > > >>>[ 1.822460] Bluetooth: HCI UART protocol H4 registered
> > > > > >>>[ 1.828297] Bluetooth: HCI UART protocol LL registered
> > > > > >>>[ 1.834774] sdhci: Secure Digital Host Controller Interface driver
> > > > > >>>[ 1.841059] sdhci: Copyright(c) Pierre Ossman
> > > > > >>>[ 1.845437] sdhci-pltfm: SDHCI platform and OF driver helper
> > > > > >>>[ 1.852834] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO
> > > > > >>>[ 1.893497] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc]
> > > > > >>>using ADMA
> > > > > >>>[ 1.937500] mmc1: SDHCI controller on 2198000.usdhc [2198000.usdhc]
> > > > > >>>using ADMA
> > > > > >>>[ 1.945049] mmc0: host does not support reading read-only switch,
> > > > > >>>assuming write-enable
> > > > > >>>[ 1.959799] mmc0: new high speed SDHC card at address 1234
> > > > > >>>[ 1.968363] mmcblk0: mmc0:1234 SA04G 3.71 GiB
> > > > > >>>[ 1.977984] caam 2100000.caam: Entropy delay = 3200
> > > > > >>>[ 2.043796] caam 2100000.caam: Instantiated RNG4 SH0
> > > > > >>>[ 2.104558] caam 2100000.caam: Instantiated RNG4 SH1
> > > > > >>>[ 2.109596] caam 2100000.caam: device ID = 0x0a16010000000000 (Era 4)
> > > > > >>>[ 2.116060] caam 2100000.caam: job rings = 2, qi = 0, dpaa2 = no
> > > > > >>>[ 2.139266] caam algorithms registered in /proc/crypto
> > > > > >>>[ 2.139341] mmcblk0: p1 p2
> > > > > >>>[ 2.150910] caam_jr 2101000.jr0: registering rng-caam
> > > > > >>>[ 2.157327] usbcore: registered new interface driver usbhid
> > > > > >>>[ 2.163103] usbhid: USB HID core driver
> > > > > >>>[ 2.171149] imx-media: subdev ov5640 2-003c bound
> > > > > >>>[ 2.176631] imx-media: subdev ipu1_vdic bound
> > > > > >>>[ 2.181640] imx-media: subdev ipu2_vdic bound
> > > > > >>>[ 2.183831] mmc1: new high speed MMC card at address 0001
> > > > > >>>[ 2.186357] imx-media: subdev ipu1_ic_prp bound
> > > > > >>>[ 2.193649] mmcblk1: mmc1:0001 M62704 3.53 GiB
> > > > > >>>[ 2.197342] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video0
> > > > > >>>[ 2.202620] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB
> > > > > >>>[ 2.208083] imx-media: subdev ipu1_ic_prpenc bound
> > > > > >>>[ 2.215764] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB
> > > > > >>>[ 2.219512] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video1
> > > > > >>>[ 2.231868] imx-media: subdev ipu1_ic_prpvf bound
> > > > > >>>[ 2.232186] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB,
> > > > > >>>chardev (244:0)
> > > > > >>>[ 2.236748] imx-media: subdev ipu2_ic_prp bound
> > > > > >>>[ 2.245958] mmcblk1: p1 p2
> > > > > >>>[ 2.251569] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video2
> > > > > >>>[ 2.258696] imx-media: subdev ipu2_ic_prpenc bound
> > > > > >>>[ 2.264108] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video3
> > > > > >>>[ 2.271119] imx-media: subdev ipu2_ic_prpvf bound
> > > > > >>>[ 2.277042] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video4
> > > > > >>>[ 2.283312] imx-media: subdev ipu1_csi0 bound
> > > > > >>>[ 2.288312] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video5
> > > > > >>>[ 2.294583] imx-media: subdev ipu1_csi1 bound
> > > > > >>>[ 2.299694] ipu2_csi0: Registered ipu2_csi0 capture as /dev/video6
> > > > > >>>[ 2.305902] imx-media: subdev ipu2_csi0 bound
> > > > > >>>[ 2.310953] ipu2_csi1: Registered ipu2_csi1 capture as /dev/video7
> > > > > >>>[ 2.317162] imx-media: subdev ipu2_csi1 bound
> > > > > >>>[ 2.322293] imx-media: subdev imx6-mipi-csi2 bound
> > > > > >>>[ 2.336025] sgtl5000 2-000a: Error reading chip id -6
> > > > > >>>[ 2.346932] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW
> > > > > >>>[ 2.360345] NET: Registered protocol family 10
> > > > > >>>[ 2.367761] Segment Routing with IPv6
> > > > > >>>[ 2.371704] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
> > > > > >>>[ 2.379180] NET: Registered protocol family 17
> > > > > >>>[ 2.383872] can: controller area network core (rev 20170425 abi 9)
> > > > > >>>[ 2.390281] NET: Registered protocol family 29
> > > > > >>>[ 2.394756] can: raw protocol (rev 20170425)
> > > > > >>>[ 2.399126] can: broadcast manager protocol (rev 20170425 t)
> > > > > >>>[ 2.404869] can: netlink gateway (rev 20170425) max_hops=1
> > > > > >>>[ 2.410989] Key type dns_resolver registered
> > > > > >>>[ 2.420041] Registering SWP/SWPB emulation handler
> > > > > >>>[ 2.426337] Loading compiled-in X.509 certificates
> > > > > >>>[ 2.505422] imx-media: subdev ipu1_csi0_mux bound
> > > > > >>>[ 2.511142] imx-media: subdev ipu2_csi1_mux bound
> > > > > >>>[ 2.515930] imx-media: imx6-mipi-csi2:4 -> ipu2_csi1_mux:0
> > > > > >>>[ 2.518384] random: fast init done
> > > > > >>>[ 2.521600] imx-media: imx6-mipi-csi2:1 -> ipu1_csi0_mux:0
> > > > > >>>[ 2.530561] imx-media: ov5640 2-003c:0 -> imx6-mipi-csi2:0
> > > > > >>>[ 2.536094] imx-media: ipu2_csi1:1 -> ipu2_ic_prp:0
> > > > > >>>[ 2.541052] imx-media: ipu2_csi1:1 -> ipu2_vdic:0
> > > > > >>>[ 2.545801] imx-media: ipu2_csi1_mux:2 -> ipu2_csi1:0
> > > > > >>>[ 2.550932] imx-media: ipu2_csi0:1 -> ipu2_ic_prp:0
> > > > > >>>[ 2.555837] imx-media: ipu2_csi0:1 -> ipu2_vdic:0
> > > > > >>>[ 2.560629] imx-media: imx6-mipi-csi2:3 -> ipu2_csi0:0
> > > > > >>>[ 2.565800] imx-media: ipu1_csi1:1 -> ipu1_ic_prp:0
> > > > > >>>[ 2.570750] imx-media: ipu1_csi1:1 -> ipu1_vdic:0
> > > > > >>>[ 2.575497] imx-media: imx6-mipi-csi2:2 -> ipu1_csi1:0
> > > > > >>>[ 2.580716] imx-media: ipu1_csi0:1 -> ipu1_ic_prp:0
> > > > > >>>[ 2.585623] imx-media: ipu1_csi0:1 -> ipu1_vdic:0
> > > > > >>>[ 2.590411] imx-media: ipu1_csi0_mux:2 -> ipu1_csi0:0
> > > > > >>>[ 2.595499] imx-media: ipu2_ic_prp:1 -> ipu2_ic_prpenc:0
> > > > > >>>[ 2.600901] imx-media: ipu2_ic_prp:2 -> ipu2_ic_prpvf:0
> > > > > >>>[ 2.606159] imx-media: ipu1_ic_prp:1 -> ipu1_ic_prpenc:0
> > > > > >>>[ 2.611548] imx-media: ipu1_ic_prp:2 -> ipu1_ic_prpvf:0
> > > > > >>>[ 2.616803] imx-media: ipu2_vdic:2 -> ipu2_ic_prp:0
> > > > > >>>[ 2.621754] imx-media: ipu1_vdic:2 -> ipu1_ic_prp:0
> > > > > >>>[ 2.637015] imx_thermal tempmon: Industrial CPU temperature grade -
> > > > > >>>max:105C critical:100C passive:95C
> > > > > >>>[ 2.650475] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock
> > > > > >>>to 1970-01-01 00:00:00 UTC (0)
> > > > > >>>[ 2.659880] cfg80211: Loading compiled-in X.509 certificates for
> > > > > >>>regulatory database
> > > > > >>>[ 2.674031] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
> > > > > >>>[ 2.682013] platform regulatory.0: Direct firmware load for
> > > > > >>>regulatory.db failed with error -2
> > > > > >>>[ 2.690851] cfg80211: failed to load regulatory.db
> > > > > >>>[ 2.695737] ALSA device list:
> > > > > >>>[ 2.698762] No soundcards found.
> > > > > >>>[ 3.592224] EXT4-fs (mmcblk0p2): recovery complete
> > > > > >>>[ 3.602020] EXT4-fs (mmcblk0p2): mounted filesystem with ordered
> > > > > >>>data mode. Opts: (null)
> > > > > >>>[ 3.610371] VFS: Mounted root (ext4 filesystem) on device 179:2.
> > > > > >>>[ 3.618708] devtmpfs: mounted
> > > > > >>>[ 3.624665] Freeing unused kernel memory: 1024K
> > > > > >>>[ 3.743951] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
> > > > > >>>Starting logging: OK
> > > > > >>>Initializing random number generator... [ 3.897748] random: dd:
> > > > > >>>uninitialized urandom read (512 bytes read)
> > > > > >>>done.
> > > > > >>>Starting network: OK
> > > > > >>>
> > > > > >>>Welcome to Engicam i.CoreM6 Quad/Dual/DualLite/Solo
> > > > > >>>buildroot login: root
> > > > > >>># media-ctl -l "'ov5640 2-003c':0 -> 'imx6-mipi-csi2':0[1]"
> > > > > >>># media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]"
> > > > > >>># media-ctl -l "'ipu1_csi1':1 -> 'ipu1_ic_prp':0[1]"
> > > > > >>># media-ctl -l "'ipu1_ic_prp':1 -> 'ipu1_ic_prpenc':0[1]"
> > > > > >>># media-ctl -l "'ipu1_ic_prpenc':1 -> 'ipu1_ic_prpenc capture':0[1]"
> > > > > >>># media-ctl -V "'ov5640 2-003c':0 [fmt:UYVY2X8/640x480 field:none]"
> > > > > >>># media-ctl -V "'imx6-mipi-csi2':2 [fmt:UYVY2X8/640x480 field:none]"
> > > > > >>># media-ctl -V "'ipu1_csi1':1 [fmt:AYUV32/640x480 field:none]"
> > > > > >>># media-ctl -V "'ipu1_ic_prp':1 [fmt:AYUV32/640x480 field:none]"
> > > > > >>># media-ctl -V "'ipu1_ic_prpenc':1 [fmt:AYUV32/640x480 field:none]"
> > > > > >>># med# media-ctl -p
> > > > > >>>Media controller API version 4.17.0
> > > > > >>>
> > > > > >>>Media device information
> > > > > >>>------------------------
> > > > > >>>driver imx-media
> > > > > >>>model imx-media
> > > > > >>>serial
> > > > > >>>bus info
> > > > > >>>hw revision 0x0
> > > > > >>>driver version 4.17.0
> > > > > >>>
> > > > > >>>Device topology
> > > > > >>>- entity 1: ov5640 2-003c (1 pad, 1 link)
> > > > > >>> type V4L2 subdev subtype Sensor flags 0
> > > > > >>> device node name /dev/v4l-subdev0
> > > > > >>>pad0: Source
> > > > > >>>[fmt:UYVY8_2X8/640x480 field:none]
> > > > > >>>-> "imx6-mipi-csi2":0 [ENABLED]
> > > > > >>>
> > > > > >>>- entity 3: ipu1_vdic (3 pads, 3 links)
> > > > > >>> type V4L2 subdev subtype Unknown flags 0
> > > > > >>> device node name /dev/v4l-subdev1
> > > > > >>>pad0: Sink
> > > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > > >>><- "ipu1_csi0":1 []
> > > > > >>><- "ipu1_csi1":1 []
> > > > > >>>pad1: Sink
> > > > > >>>[fmt:UYVY8_2X8/640x480 field:none]
> > > > > >>>pad2: Source
> > > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > > >>>-> "ipu1_ic_prp":0 []
> > > > > >>>
> > > > > >>>- entity 7: ipu2_vdic (3 pads, 3 links)
> > > > > >>> type V4L2 subdev subtype Unknown flags 0
> > > > > >>> device node name /dev/v4l-subdev2
> > > > > >>>pad0: Sink
> > > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > > >>><- "ipu2_csi0":1 []
> > > > > >>><- "ipu2_csi1":1 []
> > > > > >>>pad1: Sink
> > > > > >>>[fmt:UYVY8_2X8/640x480 field:none]
> > > > > >>>pad2: Source
> > > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > > >>>-> "ipu2_ic_prp":0 []
> > > > > >>>
> > > > > >>>- entity 11: ipu1_ic_prp (3 pads, 5 links)
> > > > > >>> type V4L2 subdev subtype Unknown flags 0
> > > > > >>> device node name /dev/v4l-subdev3
> > > > > >>>pad0: Sink
> > > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > > >>><- "ipu1_vdic":2 []
> > > > > >>><- "ipu1_csi0":1 []
> > > > > >>><- "ipu1_csi1":1 [ENABLED]
> > > > > >>>pad1: Source
> > > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > > >>>-> "ipu1_ic_prpenc":0 [ENABLED]
> > > > > >>>pad2: Source
> > > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > > >>>-> "ipu1_ic_prpvf":0 []
> > > > > >>>
> > > > > >>>- entity 15: ipu1_ic_prpenc (2 pads, 2 links)
> > > > > >>> type V4L2 subdev subtype Unknown flags 0
> > > > > >>> device node name /dev/v4l-subdev4
> > > > > >>>pad0: Sink
> > > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > > >>><- "ipu1_ic_prp":1 [ENABLED]
> > > > > >>>pad1: Source
> > > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > > >>>-> "ipu1_ic_prpenc capture":0 [ENABLED]
> > > > > >>>
> > > > > >>>- entity 18: ipu1_ic_prpenc capture (1 pad, 1 link)
> > > > > >>> type Node subtype V4L flags 0
> > > > > >>> device node name /dev/video0
> > > > > >>>pad0: Sink
> > > > > >>><- "ipu1_ic_prpenc":1 [ENABLED]
> > > > > >>>
> > > > > >>>- entity 24: ipu1_ic_prpvf (2 pads, 2 links)
> > > > > >>> type V4L2 subdev subtype Unknown flags 0
> > > > > >>> device node name /dev/v4l-subdev5
> > > > > >>>pad0: Sink
> > > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > > >>><- "ipu1_ic_prp":2 []
> > > > > >>>pad1: Source
> > > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > > >>>-> "ipu1_ic_prpvf capture":0 []
> > > > > >>>
> > > > > >>>- entity 27: ipu1_ic_prpvf capture (1 pad, 1 link)
> > > > > >>> type Node subtype V4L flags 0
> > > > > >>> device node name /dev/video1
> > > > > >>>pad0: Sink
> > > > > >>><- "ipu1_ic_prpvf":1 []
> > > > > >>>
> > > > > >>>- entity 33: ipu2_ic_prp (3 pads, 5 links)
> > > > > >>> type V4L2 subdev subtype Unknown flags 0
> > > > > >>> device node name /dev/v4l-subdev6
> > > > > >>>pad0: Sink
> > > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > > >>><- "ipu2_vdic":2 []
> > > > > >>><- "ipu2_csi0":1 []
> > > > > >>><- "ipu2_csi1":1 []
> > > > > >>>pad1: Source
> > > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > > >>>-> "ipu2_ic_prpenc":0 []
> > > > > >>>pad2: Source
> > > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > > >>>-> "ipu2_ic_prpvf":0 []
> > > > > >>>
> > > > > >>>- entity 37: ipu2_ic_prpenc (2 pads, 2 links)
> > > > > >>> type V4L2 subdev subtype Unknown flags 0
> > > > > >>> device node name /dev/v4l-subdev7
> > > > > >>>pad0: Sink
> > > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > > >>><- "ipu2_ic_prp":1 []
> > > > > >>>pad1: Source
> > > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > > >>>-> "ipu2_ic_prpenc capture":0 []
> > > > > >>>
> > > > > >>>- entity 40: ipu2_ic_prpenc capture (1 pad, 1 link)
> > > > > >>> type Node subtype V4L flags 0
> > > > > >>> device node name /dev/video2
> > > > > >>>pad0: Sink
> > > > > >>><- "ipu2_ic_prpenc":1 []
> > > > > >>>
> > > > > >>>- entity 46: ipu2_ic_prpvf (2 pads, 2 links)
> > > > > >>> type V4L2 subdev subtype Unknown flags 0
> > > > > >>> device node name /dev/v4l-subdev8
> > > > > >>>pad0: Sink
> > > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > > >>><- "ipu2_ic_prp":2 []
> > > > > >>>pad1: Source
> > > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > > >>>-> "ipu2_ic_prpvf capture":0 []
> > > > > >>>
> > > > > >>>- entity 49: ipu2_ic_prpvf capture (1 pad, 1 link)
> > > > > >>> type Node subtype V4L flags 0
> > > > > >>> device node name /dev/video3
> > > > > >>>pad0: Sink
> > > > > >>><- "ipu2_ic_prpvf":1 []
> > > > > >>>
> > > > > >>>- entity 55: ipu1_csi0 (3 pads, 4 links)
> > > > > >>> type V4L2 subdev subtype Unknown flags 0
> > > > > >>> device node name /dev/v4l-subdev9
> > > > > >>>pad0: Sink
> > > > > >>>[fmt:UYVY8_2X8/640x480 field:none
> > > > > >>>crop.bounds:(0,0)/640x480
> > > > > >>>crop:(0,0)/640x480
> > > > > >>>compose.bounds:(0,0)/640x480
> > > > > >>>compose:(0,0)/640x480]
> > > > > >>><- "ipu1_csi0_mux":2 []
> > > > > >>>pad1: Source
> > > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > > >>>-> "ipu1_ic_prp":0 []
> > > > > >>>-> "ipu1_vdic":0 []
> > > > > >>>pad2: Source
> > > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > > >>>-> "ipu1_csi0 capture":0 []
> > > > > >>>
> > > > > >>>- entity 59: ipu1_csi0 capture (1 pad, 1 link)
> > > > > >>> type Node subtype V4L flags 0
> > > > > >>> device node name /dev/video4
> > > > > >>>pad0: Sink
> > > > > >>><- "ipu1_csi0":2 []
> > > > > >>>
> > > > > >>>- entity 65: ipu1_csi1 (3 pads, 4 links)
> > > > > >>> type V4L2 subdev subtype Unknown flags 0
> > > > > >>> device node name /dev/v4l-subdev10
> > > > > >>>pad0: Sink
> > > > > >>>[fmt:UYVY8_2X8/640x480 field:none
> > > > > >>>crop.bounds:(0,0)/640x480
> > > > > >>>crop:(0,0)/640x480
> > > > > >>>compose.bounds:(0,0)/640x480
> > > > > >>>compose:(0,0)/640x480]
> > > > > >>><- "imx6-mipi-csi2":2 [ENABLED]
> > > > > >>>pad1: Source
> > > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > > >>>-> "ipu1_ic_prp":0 [ENABLED]
> > > > > >>>-> "ipu1_vdic":0 []
> > > > > >>>pad2: Source
> > > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > > >>>-> "ipu1_csi1 capture":0 []
> > > > > >>>
> > > > > >>>- entity 69: ipu1_csi1 capture (1 pad, 1 link)
> > > > > >>> type Node subtype V4L flags 0
> > > > > >>> device node name /dev/video5
> > > > > >>>pad0: Sink
> > > > > >>><- "ipu1_csi1":2 []
> > > > > >>>
> > > > > >>>- entity 75: ipu2_csi0 (3 pads, 4 links)
> > > > > >>> type V4L2 subdev subtype Unknown flags 0
> > > > > >>> device node name /dev/v4l-subdev11
> > > > > >>>pad0: Sink
> > > > > >>>[fmt:UYVY8_2X8/640x480 field:none
> > > > > >>>crop.bounds:(0,0)/640x480
> > > > > >>>crop:(0,0)/640x480
> > > > > >>>compose.bounds:(0,0)/640x480
> > > > > >>>compose:(0,0)/640x480]
> > > > > >>><- "imx6-mipi-csi2":3 []
> > > > > >>>pad1: Source
> > > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > > >>>-> "ipu2_ic_prp":0 []
> > > > > >>>-> "ipu2_vdic":0 []
> > > > > >>>pad2: Source
> > > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > > >>>-> "ipu2_csi0 capture":0 []
> > > > > >>>
> > > > > >>>- entity 79: ipu2_csi0 capture (1 pad, 1 link)
> > > > > >>> type Node subtype V4L flags 0
> > > > > >>> device node name /dev/video6
> > > > > >>>pad0: Sink
> > > > > >>><- "ipu2_csi0":2 []
> > > > > >>>
> > > > > >>>- entity 85: ipu2_csi1 (3 pads, 4 links)
> > > > > >>> type V4L2 subdev subtype Unknown flags 0
> > > > > >>> device node name /dev/v4l-subdev12
> > > > > >>>pad0: Sink
> > > > > >>>[fmt:UYVY8_2X8/640x480 field:none
> > > > > >>>crop.bounds:(0,0)/640x480
> > > > > >>>crop:(0,0)/640x480
> > > > > >>>compose.bounds:(0,0)/640x480
> > > > > >>>compose:(0,0)/640x480]
> > > > > >>><- "ipu2_csi1_mux":2 []
> > > > > >>>pad1: Source
> > > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > > >>>-> "ipu2_ic_prp":0 []
> > > > > >>>-> "ipu2_vdic":0 []
> > > > > >>>pad2: Source
> > > > > >>>[fmt:AYUV8_1X32/640x480 field:none]
> > > > > >>>-> "ipu2_csi1 capture":0 []
> > > > > >>>
> > > > > >>>- entity 89: ipu2_csi1 capture (1 pad, 1 link)
> > > > > >>> type Node subtype V4L flags 0
> > > > > >>> device node name /dev/video7
> > > > > >>>pad0: Sink
> > > > > >>><- "ipu2_csi1":2 []
> > > > > >>>
> > > > > >>>- entity 95: imx6-mipi-csi2 (5 pads, 5 links)
> > > > > >>> type V4L2 subdev subtype Unknown flags 0
> > > > > >>> device node name /dev/v4l-subdev13
> > > > > >>>pad0: Sink
> > > > > >>>[fmt:UYVY8_2X8/640x480 field:none]
> > > > > >>><- "ov5640 2-003c":0 [ENABLED]
> > > > > >>>pad1: Source
> > > > > >>>[fmt:UYVY8_2X8/640x480 field:none]
> > > > > >>>-> "ipu1_csi0_mux":0 []
> > > > > >>>pad2: Source
> > > > > >>>[fmt:UYVY8_2X8/640x480 field:none]
> > > > > >>>-> "ipu1_csi1":0 [ENABLED]
> > > > > >>>pad3: Source
> > > > > >>>[fmt:UYVY8_2X8/640x480 field:none]
> > > > > >>>-> "ipu2_csi0":0 []
> > > > > >>>pad4: Source
> > > > > >>>[fmt:UYVY8_2X8/640x480 field:none]
> > > > > >>>-> "ipu2_csi1_mux":0 []
> > > > > >>>
> > > > > >>>- entity 101: ipu1_csi0_mux (3 pads, 2 links)
> > > > > >>> type V4L2 subdev subtype Unknown flags 0
> > > > > >>> device node name /dev/v4l-subdev14
> > > > > >>>pad0: Sink
> > > > > >>>[fmt:unknown/0x0]
> > > > > >>><- "imx6-mipi-csi2":1 []
> > > > > >>>pad1: Sink
> > > > > >>>[fmt:unknown/0x0]
> > > > > >>>pad2: Source
> > > > > >>>[fmt:unknown/0x0]
> > > > > >>>-> "ipu1_csi0":0 []
> > > > > >>>
> > > > > >>>- entity 105: ipu2_csi1_mux (3 pads, 2 links)
> > > > > >>> type V4L2 subdev subtype Unknown flags 0
> > > > > >>> device node name /dev/v4l-subdev15
> > > > > >>>pad0: Sink
> > > > > >>>[fmt:unknown/0x0]
> > > > > >>><- "imx6-mipi-csi2":4 []
> > > > > >>>pad1: Sink
> > > > > >>>[fmt:unknown/0x0]
> > > > > >>>pad2: Source
> > > > > >>>[fmt:unknown/0x0]
> > > > > >>>-> "ipu2_csi1":0 []
> > > > > >>>
> > > > > >>># GST_DEBUG="v4l2*:5" gst-launch-1.0 -v v4l2src device=/dev/video1 ! \
> > > > > >>>>autovideosink
> > > > > >>>0:00:01.086281666 185 0x1dce880 DEBUG v4l2
> > > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l1
> > > > > >>>0:00:01.087369666 185 0x1dce880 DEBUG v4l2
> > > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l5
> > > > > >>>0:00:01.088496000 185 0x1dce880 DEBUG v4l2
> > > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l.
> > > > > >>>0:00:01.089540333 185 0x1dce880 DEBUG v4l2
> > > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4lR
> > > > > >>>0:00:01.090494666 185 0x1dce880 DEBUG v4l2
> > > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4lH
> > > > > >>>0:00:01.091657666 185 0x1dce880 DEBUG v4l2
> > > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l4
> > > > > >>>0:00:01.092745000 185 0x1dce880 DEBUG v4l2
> > > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l
> > > > > >>>0:00:01.093703333 185 0x1dce880 DEBUG v4l2
> > > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l
> > > > > >>>0:00:01.094854000 185 0x1dce880 DEBUG v4l2
> > > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l
> > > > > >>>0:00:01.095815000 185 0x1dce880 DEBUG v4l2
> > > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l
> > > > > >>>0:00:01.096818666 185 0x1dce880 DEBUG v4l2
> > > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4lB
> > > > > >>>0:00:01.097819000 185 0x1dce880 DEBUG v4l2
> > > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l8
> > > > > >>>0:00:01.098771000 185 0x1dce880 DEBUG v4l2
> > > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l
> > > > > >>>0:00:01.099798666 185 0x1dce880 DEBUG v4l2
> > > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l1
> > > > > >>>0:00:01.100776666 185 0x1dce880 DEBUG v4l2
> > > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4lV
> > > > > >>>0:00:01.101755333 185 0x1dce880 DEBUG v4l2
> > > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4lY
> > > > > >>>0:00:01.102771666 185 0x1dce880 DEBUG v4l2
> > > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4lP
> > > > > >>>0:00:01.103712000 185 0x1dce880 DEBUG v4l2
> > > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l4
> > > > > >>>0:00:01.104720000 185 0x1dce880 DEBUG v4l2
> > > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4lO
> > > > > >>>0:00:01.105697000 185 0x1dce880 DEBUG v4l2
> > > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4lP
> > > > > >>>0:00:01.106629666 185 0x1dce880 DEBUG v4l2
> > > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l4
> > > > > >>>0:00:01.107681666 185 0x1dce880 DEBUG v4l2
> > > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l4
> > > > > >>>0:00:01.108660666 185 0x1dce880 DEBUG v4l2
> > > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l2
> > > > > >>>0:00:01.442437333 185 0x1dce880 DEBUG v4l2
> > > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l0
> > > > > >>>0:00:01.444673333 185 0x1dce880 DEBUG v4l2
> > > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l2
> > > > > >>>0:00:01.446842000 185 0x1dce880 DEBUG v4l2
> > > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l2
> > > > > >>>0:00:01.449084000 185 0x1dce880 DEBUG v4l2
> > > > > >>>gstv4l2object.c:1487:gst_v4l2_object_v4l4
> > > > > >>>Setting pipeline to PAUSED ...
> > > > > >>>0:00:01.680823000 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:524:gst_v4l2_open:<v4l2src01
> > > > > >>>0:00:01.681953333 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:69:gst_v4l2_get_capabilities
> > > > > >>>0:00:01.683098666 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:140:gst_v4l2_fill_lists:<v4s
> > > > > >>>0:00:01.684056666 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:143:gst_v4l2_fill_lists:<v4s
> > > > > >>>0:00:01.685201000 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:215:gst_v4l2_fill_lists:<v4s
> > > > > >>>0:00:01.686159333 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > > > >>>0:00:01.687207666 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4C
> > > > > >>>0:00:01.688183666 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > > > >>>0:00:01.689155333 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4M
> > > > > >>>0:00:01.690142000 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > > > >>>0:00:01.691114000 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4P
> > > > > >>>0:00:01.692080000 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > > > >>>0:00:01.693073000 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4R
> > > > > >>>0:00:01.694043000 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > > > >>>0:00:01.695760000 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4L
> > > > > >>>0:00:01.696736333 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > > > >>>0:00:01.697708000 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4G
> > > > > >>>0:00:01.698699000 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > > > >>>0:00:01.699667000 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4H
> > > > > >>>0:00:01.700633000 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > > > >>>0:00:01.701623666 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4I
> > > > > >>>0:00:01.702591000 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > > > >>>0:00:01.703554333 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4K
> > > > > >>>0:00:01.704604000 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > > > >>>0:00:01.705576666 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4M
> > > > > >>>0:00:01.706567000 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > > > >>>0:00:02.040204667 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4B
> > > > > >>>0:00:02.042194667 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > > > >>>0:00:02.044190000 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4G
> > > > > >>>0:00:02.046338333 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > > > >>>0:00:02.048327667 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4H
> > > > > >>>0:00:02.050296000 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > > > >>>0:00:02.052385000 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4K
> > > > > >>>0:00:02.054376000 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > > > >>>0:00:02.056461333 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4L
> > > > > >>>0:00:02.058434000 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:247:gst_v4l2_fill_lists:<v41
> > > > > >>>0:00:02.060423667 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:257:gst_v4l2_fill_lists:<v4c
> > > > > >>>0:00:02.062382667 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:263:gst_v4l2_fill_lists:<v4s
> > > > > >>>0:00:02.064291333 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:283:gst_v4l2_fill_lists:<v40
> > > > > >>>0:00:02.066224667 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:292:gst_v4l2_fill_lists:<v4.
> > > > > >>>0:00:02.067190333 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:283:gst_v4l2_fill_lists:<v40
> > > > > >>>0:00:02.068174333 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:300:gst_v4l2_fill_lists:<v40
> > > > > >>>0:00:02.069141000 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:283:gst_v4l2_fill_lists:<v40
> > > > > >>>0:00:02.070113000 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:305:gst_v4l2_fill_lists:<v4d
> > > > > >>>0:00:02.071088333 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:456:gst_v4l2_fill_lists:<v4e
> > > > > >>>0:00:02.072040000 185 0x1dce880 INFO v4l2
> > > > > >>>v4l2_calls.c:592:gst_v4l2_open:<v4l2src0y
> > > > > >>>0:00:02.073017333 185 0x1dce880 DEBUG v4l2
> > > > > >>>gstv4l2object.c:804:gst_v4l2_set_default)
> > > > > >>>0:00:02.074010667 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:740:gst_v4l2_get_norm:<v4l2m
> > > > > >>>0:00:02.075021000 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:754:gst_v4l2_get_norm: Fail1
> > > > > >>>0:00:02.076012000 185 0x1dce880 DEBUG v4l2
> > > > > >>>v4l2_calls.c:1027:gst_v4l2_get_input:<v4t
> > > > > >>>Pipeline is live and does not need PREROLL ...
> > > > > >>>0:00:02.080105333 185 0x1ec39b0 DEBUG v4l2
> > > > > >>>gstv4l2object.c:1109:gst_v4l2_object_fil.
> > > > > >>><v4l2src0> getting src format enumerations
> > > > > >>>0:00:02.412981333 185 0x1ec39b0 INFO New clock: GstSystemClock
> > > > > >>> v4l2 gstv4l2object.c:1146:gst_v4l2_object_fill_format_list:<v4l2src0>
> > > > > >>>got 7 format(s):
> > > > > >>>0:00:02.415407667 185 0x1ec39b0 INFO v4l2
> > > > > >>>gstv4l2object.c:1152:gst_v4l2_object_filV
> > > > > >>>0:00:02.417531667 185 0x1ec39b0 INFO v4l2
> > > > > >>>gstv4l2object.c:1152:gst_v4l2_object_filY
> > > > > >>>0:00:02.419703667 185 0x1ec39b0 INFO v4l2
> > > > > >>>gstv4l2object.c:1152:gst_v4l2_object_filP
> > > > > >>>0:00:02.421860000 185 0x1ec39b0 INFO v4l2
> > > > > >>>gstv4l2object.c:1152:gst_v4l2_object_fil2
> > > > > >>>0:00:02.424022667 185 0x1ec39b0 INFO v4l2
> > > > > >>>gstv4l2object.c:1152:gst_v4l2_object_fil2
> > > > > >>>0:00:02.426295000 185 0x1ec39b0 INFO v4l2
> > > > > >>>gstv4l2object.c:1152:gst_v4l2_object_fil6
> > > > > >>>0:00:02.428481333 185 0x1ec39b0 INFO v4l2
> > > > > >>>gstv4l2object.c:1152:gst_v4l2_object_fil2
> > > > > >>>0:00:02.430728333 185 0x1ec39b0 DEBUG v4l2
> > > > > >>>gstv4l2object.c:2564:gst_v4l2_object_proV
> > > > > >>>0:00:02.432985333 185 0x1ec39b0 DEBUG v4l2
> > > > > >>>gstv4l2object.c:2691:gst_v4l2_object_pro)
> > > > > >>>0:00:02.436117000 185 0x1ec39b0 DEBUG v4l2
> > > > > >>>gstv4l2object.c:2564:gst_v4l2_object_proY
> > > > > >>>0:00:02.437252333 185 0x1ec39b0 DEBUG v4l2
> > > > > >>>gstv4l2object.c:2691:gst_v4l2_object_pro)
> > > > > >>>0:00:02.438579000 185 0x1ec39b0 DEBUG v4l2
> > > > > >>>gstv4l2object.c:2564:gst_v4l2_object_proP
> > > > > >>>0:00:02.439656000 185 0x1ec39b0 DEBUG v4l2
> > > > > >>>gstv4l2object.c:2691:gst_v4l2_object_pro)
> > > > > >>>0:00:02.441016667 185 0x1ec39b0 DEBUG v4l2
> > > > > >>>gstv4l2object.c:2564:gst_v4l2_object_pro2
> > > > > >>>0:00:02.442092333 185 0x1ec39b0 DEBUG v4l2
> > > > > >>>gstv4l2object.c:2691:gst_v4l2_object_pro)
> > > > > >>>0:00:02.443443333 185 0x1ec39b0 DEBUG v4l2
> > > > > >>>gstv4l2object.c:2564:gst_v4l2_object_pro2
> > > > > >>>0:00:02.444626667 185 0x1ec39b0 DEBUG v4l2
> > > > > >>>gstv4l2object.c:2691:gst_v4l2_object_pro)
> > > > > >>>0:00:02.445990667 185 0x1ec39b0 DEBUG v4l2
> > > > > >>>gstv4l2object.c:2564:gst_v4l2_object_pro6
> > > > > >>>0:00:02.447063667 185 0x1ec39b0 DEBUG v4l2
> > > > > >>>gstv4l2object.c:2691:gst_v4l2_object_pro)
> > > > > >>>0:00:02.448410333 185 0x1ec39b0 DEBUG v4l2
> > > > > >>>gstv4l2object.c:2564:gst_v4l2_object_pro2
> > > > > >>>0:00:02.782148333 185 0x1ec39b0 DEBUG v4l2
> > > > > >>>gstv4l2object.c:2691:gst_v4l2_object_pro)
> > > > > >>>0:00:02.785264333 185 0x1ec39b0 INFO v4l2
> > > > > >>>gstv4l2object.c:3967:gst_v4l2_object_get}
> > > > > >>>0:00:02.788800000 185 0x1ec39b0 DEBUG v4l2src
> > > > > >>>gstv4l2src.c:300:gst_v4l2src_negotiate:<}
> > > > > >>>0:00:02.792207000 185 0x1ec39b0 DEBUG v4l2src
> > > > > >>>gstv4l2src.c:308:gst_v4l2src_negotiate:<]
> > > > > >>>0:00:02.795419000 185 0x1ec39b0 DEBUG v4l2src
> > > > > >>>gstv4l2src.c:316:gst_v4l2src_negotiate:<}
> > > > > >>>0:00:03.132052667 185 0x1ec39b0 DEBUG v4l2src
> > > > > >>>gstv4l2src.c:256:gst_v4l2src_fixate:<v4l}
> > > > > >>>0:00:03.134399667 185 0x1ec39b0 DEBUG v4l2src
> > > > > >>>gstv4l2src.c:282:gst_v4l2src_fixate:<v4l}
> > > > > >>>0:00:03.136800667 185 0x1ec39b0 DEBUG v4l2src
> > > > > >>>gstv4l2src.c:367:gst_v4l2src_negotiate:<1
> > > > > >>>0:00:03.139067333 185 0x1ec39b0 DEBUG v4l2
> > > > > >>>gstv4l2object.c:3887:gst_v4l2_object_stog
> > > > > >>>0:00:03.141452000 185 0x1ec39b0 DEBUG v4l2
> > > > > >>>gstv4l2object.c:3176:gst_v4l2_object_seto
> > > > > >>>0:00:03.143608667 185 0x1ec39b0 DEBUG v4l2
> > > > > >>>gstv4l2object.c:3310:gst_v4l2_object_set0
> > > > > >>>0:00:03.146025333 185 0x1ec39b0 DEBUG v4l2
> > > > > >>>gstv4l2object.c:3361:gst_v4l2_object_set1
> > > > > >>>0:00:03.148229000 185 0x1ec39b0 DEBUG v4l2
> > > > > >>>gstv4l2object.c:3370:gst_v4l2_object_set0
> > > > > >>>0:00:03.150373667 185 0x1ec39b0 DEBUG v4l2
> > > > > >>>gstv4l2object.c:3404:gst_v4l2_object_set1
> > > > > >>>0:00:03.152589667 185 0x1ec39b0 DEBUG v4l2
> > > > > >>>gstv4l2object.c:3414:gst_v4l2_object_set0
> > > > > >>>0:00:03.155250667 185 0x1ec39b0 DEBUG v4l2
> > > > > >>>gstv4l2object.c:3455:gst_v4l2_object_set1
> > > > > >>>0:00:03.156584667 185 0x1ec39b0 DEBUG v4l2
> > > > > >>>gstv4l2object.c:3472:gst_v4l2_object_set1
> > > > > >>>0:00:03.157659333 185 0x1ec39b0 INFO v4l2
> > > > > >>>gstv4l2object.c:3504:gst_v4l2_object_set1
> > > > > >>>0:00:03.491432000 185 0x1ec39b0 DEBUG v4l2
> > > > > >>>gstv4l2object.c:2960:gst_v4l2_object_ext0
> > > > > >>>0:00:03.493645333 185 0x1ec39b0 DEBUG v4l2
> > > > > >>>gstv4l2object.c:3071:gst_v4l2_object_sav0
> > > > > >>>0:00:03.496027333 185 0x1ec39b0 DEBUG v4l2
> > > > > >>>gstv4l2object.c:2843:gst_v4l2_object_setm
> > > > > >>>0:00:03.498180000 185 0x1ec39b0 INFO v4l2
> > > > > >>>gstv4l2object.c:2867:gst_v4l2_object_set2
> > > > > >>>0:00:03.502772000 185 0x1ec39b0 DEBUG v4l2bufferpool
> > > > > >>>gstv4l2bufferpool.c:509:gst_v4l2_buffer_;
> > > > > >>>0:00:03.505283333 185 0x1ec39b0 INFO v4l2bufferpool
> > > > > >>>gstv4l2bufferpool.c:557:gst_v4l2_buffer_2
> > > > > >>>0:00:03.507120000 185 0x1ec39b0 INFO v4l2bufferpool
> > > > > >>>gstv4l2bufferpool.c:570:gst_v4l2_buffer_2
> > > > > >>>/GstPipeline:pipeline0/GstV4l2Src:v4l2src0.GstPad:src: caps =
> > > > > >>>video/x-raw, format=(string)YUY2, width=(i1
> > > > > >>>/GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0.GstGhostPad:sink.GstProxyPad:proxypad0:
> > > > > >>>caps = vi1
> > > > > >>>/GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0/GstKMSSink:autovideosink0-actual-sink-kms.GstPad:1
> > > > > >>>0:00:03/GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0.GstGhostPad:sink:
> > > > > >>>caps = video/x-raw, form1
> > > > > >>>.512440000 185 0x1ec39b0 DEBUG v4l2
> > > > > >>>gstv4l2object.c:3985:gst_v4l2_object_decide_alln
> > > > > >>>0:00:03.513556667 185 0x1ec39b0 DEBUG v4l2
> > > > > >>>gstv4l2object.c:4011:gst_v4l2_object_dec>
> > > > > >>>0:00:03.514745667 185 0x1ec39b0 DEBUG v4l2
> > > > > >>>gstv4l2object.c:4069:gst_v4l2_object_dec>
> > > > > >>>0:00:03.515889000 185 0x1ec39b0 DEBUG v4l2
> > > > > >>>gstv4l2object.c:4134:gst_v4l2_object_deca
> > > > > >>>0:00:03.516969667 185 0x1ec39b0 DEBUG v4l2
> > > > > >>>gstv4l2object.c:4143:gst_v4l2_object_dec;
> > > > > >>>0:00:03.851350333 185 0x1ec39b0 DEBUG v4l2bufferpool
> > > > > >>>gstv4l2bufferpool.c:509:gst_v4l2_buffer_2
> > > > > >>>ams)NULL, options=(string)< GstBufferPoolOptionVideoMeta >;
> > > > > >>>0:00:03.853620333 185 0x1ec39b0 INFO v4l2bufferpool
> > > > > >>>gstv4l2bufferpool.c:570:gst_v4l2_buffer_2
> > > > > >>>0:00:03.855780667 185 0x1ec39b0 DEBUG v4l2
> > > > > >>>gstv4l2object.c:4150:gst_v4l2_object_dec;
> > > > > >>>0:00:03.858430000 185 0x1ec39b0 DEBUG v4l2bufferpool
> > > > > >>>gstv4l2bufferpool.c:509:gst_v4l2_buffer_;
> > > > > >>>0:00:03.861572333 185 0x1ec39b0 DEBUG v4l2bufferpool
> > > > > >>>gstv4l2bufferpool.c:707:gst_v4l2_buffer_l
> > > > > >>>0:00:03.863468333 185 0x1ec39b0 DEBUG v4l2bufferpool
> > > > > >>>gstv4l2bufferpool.c:737:gst_v4l2_buffer_s
> > > > > >>>0:00:03.918861000 185 0x1ec39b0 DEBUG v4l2allocator
> > > > > >>>gstv4l2allocator.c:706:gst_v4l2_allocatod
> > > > > >>>0:00:03.943783333 185 0x1ec39b0 DEBUG v4l2bufferpool
> > > > > >>>gstv4l2bufferpool.c:1389:gst_v4l2_buffer8
> > > > > >>>0:00:03.946129333 185 0x1ec39b0 DEBUG v4l2bufferpool
> > > > > >>>gstv4l2bufferpool.c:1389:gst_v4l2_buffer8
> > > > > >>>0:00:03.948065000 185 0x1ec39b0 DEBUG v4l2bufferpool
> > > > > >>>gstv4l2bufferpool.c:1389:gst_v4l2_buffer8
> > > > > >>>0:00:03.950006000 185 0x1ec39b0 DEBUG v4l2bufferpool
> > > > > >>>gstv4l2bufferpool.c:952:gst_v4l2_buffer_g
> > > > > >>>0:00:03.996241333 185 0x1ec39b0 ERROR v4l2bufferpool
> > > > > >>>gstv4l2bufferpool.c:641:gst_v4l2_buffer_)
> > > > > >>>0:00:03.998199667 185 0x1ec39b0 DEBUG v4l2bufferpool
> > > > > >>>gstv4l2bufferpool.c:1311:gst_v4l2_buffere
> > > > > >>>0:00:04.000463000 185 0x1ec39b0 WARN v4l2bufferpool
> > > > > >>>gstv4l2bufferpool.c:1064:gst_v4l2_buffer)
> > > > > >>>0:00:04.004649333 185 0x1ec39b0 DEBUG v4l2bufferpool
> > > > > >>>gstv4l2bufferpool.c:1283:gst_v4l2_bufferr
> > > > > >>>0:00:04.005853333 185 0x1ec39b0 WARN
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
2018-10-22 12:25 ` Adam Ford
@ 2018-10-22 12:40 ` Fabio Estevam
2018-10-23 15:19 ` Adam Ford
0 siblings, 1 reply; 38+ messages in thread
From: Fabio Estevam @ 2018-10-22 12:40 UTC (permalink / raw)
To: Adam Ford
Cc: jacopo mondi, Steve Longerbeam, Jagan Teki, Philipp Zabel,
Fabio Estevam,
Discussion of the development of and with GStreamer, linux-media,
linux-kernel
Hi Adam,
On Mon, Oct 22, 2018 at 9:37 AM Adam Ford <aford173@gmail.com> wrote:
> Thank you! This tutorial web site is exactly what I need. The
> documentation page in Linux touched on the media-ctl links, but it
> didn't explain the syntax or the mapping. This graphical
> interpretation really helps it make more sense.
Is capturing working well on your i.MX6 board now?
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
2018-10-22 12:40 ` Fabio Estevam
@ 2018-10-23 15:19 ` Adam Ford
2018-10-23 16:36 ` Steve Longerbeam
0 siblings, 1 reply; 38+ messages in thread
From: Adam Ford @ 2018-10-23 15:19 UTC (permalink / raw)
To: Fabio Estevam
Cc: jacopo, steve_longerbeam, Jagan Teki, p.zabel, Fabio Estevam,
gstreamer-devel, linux-media, Linux Kernel Mailing List
On Mon, Oct 22, 2018 at 7:40 AM Fabio Estevam <festevam@gmail.com> wrote:
>
> Hi Adam,
>
> On Mon, Oct 22, 2018 at 9:37 AM Adam Ford <aford173@gmail.com> wrote:
>
> > Thank you! This tutorial web site is exactly what I need. The
> > documentation page in Linux touched on the media-ctl links, but it
> > didn't explain the syntax or the mapping. This graphical
> > interpretation really helps it make more sense.
>
> Is capturing working well on your i.MX6 board now?
Fabio,
Unfortunately, no. I built the rootfs based on Jagan's instructions
at https://openedev.amarulasolutions.com/display/ODWIKI/i.CoreM6+1.5
I tried building both the 4.15-RC6 kernel, a 4.19 kernel and a 4.14 LTS kernel.
Using the suggested method of generating the graphical display of the
pipeline options, I am able to enable various pipeline options
connecting different /dev/videoX options tot he camera. I have tried
both the suggested method above as well as the instructions found in
Documentation/media/v4l-drivers/imx.rst for their respective kernels,
and I have tried multiple options to capture through
ipu1_csi1_capture, ipu2_csi1_capture, and ip1_ic_prepenc capture, and
all yield a broken pipe.
libv4l2: error turning on stream: Broken pipe
ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Could
not read from resource.
Additional debug info:
gstv4l2bufferpool.c(1064): gst_v4l2_buffer_pool_poll ():
/GstPipeline:pipeline0/GstV4l2Src:v4l2src0:
poll error 1: Broken pipe (32)
I can hear the camera click when I start gstreamer and click again
when it stops trying to stream.
dmesg indicates a broken pipe as well..
[ 2419.851502] ipu2_csi1: pipeline start failed with -32
might you have any suggestions?
thanks,
adam
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
2018-10-23 15:19 ` Adam Ford
@ 2018-10-23 16:36 ` Steve Longerbeam
2018-10-23 17:34 ` Adam Ford
0 siblings, 1 reply; 38+ messages in thread
From: Steve Longerbeam @ 2018-10-23 16:36 UTC (permalink / raw)
To: Adam Ford, Fabio Estevam
Cc: jacopo, Jagan Teki, p.zabel, Fabio Estevam, gstreamer-devel,
linux-media, Linux Kernel Mailing List
Hi Adam,
On 10/23/18 8:19 AM, Adam Ford wrote:
> On Mon, Oct 22, 2018 at 7:40 AM Fabio Estevam <festevam@gmail.com> wrote:
>> Hi Adam,
>>
>> On Mon, Oct 22, 2018 at 9:37 AM Adam Ford <aford173@gmail.com> wrote:
>>
>>> Thank you! This tutorial web site is exactly what I need. The
>>> documentation page in Linux touched on the media-ctl links, but it
>>> didn't explain the syntax or the mapping. This graphical
>>> interpretation really helps it make more sense.
>> Is capturing working well on your i.MX6 board now?
> Fabio,
>
> Unfortunately, no. I built the rootfs based on Jagan's instructions
> at https://openedev.amarulasolutions.com/display/ODWIKI/i.CoreM6+1.5
>
> I tried building both the 4.15-RC6 kernel, a 4.19 kernel and a 4.14 LTS kernel.
>
> Using the suggested method of generating the graphical display of the
> pipeline options, I am able to enable various pipeline options
> connecting different /dev/videoX options tot he camera. I have tried
> both the suggested method above as well as the instructions found in
> Documentation/media/v4l-drivers/imx.rst for their respective kernels,
> and I have tried multiple options to capture through
> ipu1_csi1_capture, ipu2_csi1_capture, and ip1_ic_prepenc capture, and
> all yield a broken pipe.
>
> libv4l2: error turning on stream: Broken pipe
> ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Could
> not read from resource.
> Additional debug info:
> gstv4l2bufferpool.c(1064): gst_v4l2_buffer_pool_poll ():
> /GstPipeline:pipeline0/GstV4l2Src:v4l2src0:
> poll error 1: Broken pipe (32)
>
> I can hear the camera click when I start gstreamer and click again
> when it stops trying to stream.
>
> dmesg indicates a broken pipe as well..
>
> [ 2419.851502] ipu2_csi1: pipeline start failed with -32
>
> might you have any suggestions?
This -EPIPE error might mean you have a mis-match of resolution, pixel
format, or field type between one of the source->sink pad links. You can
find out which pads have a mis-match by enabling dynamic debug in the
kernel function __media_pipeline_start.
Also make sure you are attempting to stream from the correct /dev/videoN.
Steve
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
2018-10-23 16:36 ` Steve Longerbeam
@ 2018-10-23 17:34 ` Adam Ford
2018-10-23 17:39 ` Steve Longerbeam
0 siblings, 1 reply; 38+ messages in thread
From: Adam Ford @ 2018-10-23 17:34 UTC (permalink / raw)
To: steve_longerbeam
Cc: Fabio Estevam, jacopo, Jagan Teki, p.zabel, Fabio Estevam,
gstreamer-devel, linux-media, Linux Kernel Mailing List
On Tue, Oct 23, 2018 at 11:36 AM Steve Longerbeam
<steve_longerbeam@mentor.com> wrote:
>
> Hi Adam,
>
> On 10/23/18 8:19 AM, Adam Ford wrote:
> > On Mon, Oct 22, 2018 at 7:40 AM Fabio Estevam <festevam@gmail.com> wrote:
> >> Hi Adam,
> >>
> >> On Mon, Oct 22, 2018 at 9:37 AM Adam Ford <aford173@gmail.com> wrote:
> >>
> >>> Thank you! This tutorial web site is exactly what I need. The
> >>> documentation page in Linux touched on the media-ctl links, but it
> >>> didn't explain the syntax or the mapping. This graphical
> >>> interpretation really helps it make more sense.
> >> Is capturing working well on your i.MX6 board now?
> > Fabio,
> >
> > Unfortunately, no. I built the rootfs based on Jagan's instructions
> > at https://openedev.amarulasolutions.com/display/ODWIKI/i.CoreM6+1.5
> >
> > I tried building both the 4.15-RC6 kernel, a 4.19 kernel and a 4.14 LTS kernel.
> >
> > Using the suggested method of generating the graphical display of the
> > pipeline options, I am able to enable various pipeline options
> > connecting different /dev/videoX options tot he camera. I have tried
> > both the suggested method above as well as the instructions found in
> > Documentation/media/v4l-drivers/imx.rst for their respective kernels,
> > and I have tried multiple options to capture through
> > ipu1_csi1_capture, ipu2_csi1_capture, and ip1_ic_prepenc capture, and
> > all yield a broken pipe.
> >
> > libv4l2: error turning on stream: Broken pipe
> > ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Could
> > not read from resource.
> > Additional debug info:
> > gstv4l2bufferpool.c(1064): gst_v4l2_buffer_pool_poll ():
> > /GstPipeline:pipeline0/GstV4l2Src:v4l2src0:
> > poll error 1: Broken pipe (32)
> >
> > I can hear the camera click when I start gstreamer and click again
> > when it stops trying to stream.
> >
> > dmesg indicates a broken pipe as well..
> >
> > [ 2419.851502] ipu2_csi1: pipeline start failed with -32
> >
> > might you have any suggestions?
>
>
> This -EPIPE error might mean you have a mis-match of resolution, pixel
> format, or field type between one of the source->sink pad links. You can
> find out which pads have a mis-match by enabling dynamic debug in the
> kernel function __media_pipeline_start.
Following Jagan's suggestion, I tried to make sure all the resolution
and pixel formats were set the same between each source and sink.
media-ctl --set-v4l2 "'ov5640 2-0010':0[fmt:UYVY2X8/640x480
field:none]"
media-ctl --set-v4l2 "'imx6-mipi-csi2':1[fmt:UYVY2X8/640x480
field:none]"
media-ctl --set-v4l2 "'ipu1_csi0_mux':2[fmt:UYVY2X8/640x480
field:none]"
media-ctl --set-v4l2 "'ipu1_csi0':2[fmt:AYUV32/640x480 field:none]"
>
> Also make sure you are attempting to stream from the correct /dev/videoN.
I have graphically plotted the pipeline using media-ctl --print-dot
and I can see the proper video is routed, but your dynamic debug
suggestion yielded something:
imx-media capture-subsystem: link validation failed for 'ov5640
2-0010':0 -> 'imx6-mipi-csi2':0, error -32
I am assume this means the interface between the camera and the csi2
isn't working. I am going to double check the power rails and the
clocks. i can hear it click when activated and deactivated, so
something is happening.
adam
>
> Steve
>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
2018-10-23 17:34 ` Adam Ford
@ 2018-10-23 17:39 ` Steve Longerbeam
2018-10-23 17:54 ` Adam Ford
0 siblings, 1 reply; 38+ messages in thread
From: Steve Longerbeam @ 2018-10-23 17:39 UTC (permalink / raw)
To: Adam Ford
Cc: Fabio Estevam, jacopo, Jagan Teki, p.zabel, Fabio Estevam,
gstreamer-devel, linux-media, Linux Kernel Mailing List
On 10/23/18 10:34 AM, Adam Ford wrote:
> On Tue, Oct 23, 2018 at 11:36 AM Steve Longerbeam
> <steve_longerbeam@mentor.com> wrote:
>> Hi Adam,
>>
>> On 10/23/18 8:19 AM, Adam Ford wrote:
>>> On Mon, Oct 22, 2018 at 7:40 AM Fabio Estevam <festevam@gmail.com> wrote:
>>>> Hi Adam,
>>>>
>>>> On Mon, Oct 22, 2018 at 9:37 AM Adam Ford <aford173@gmail.com> wrote:
>>>>
>>>>> Thank you! This tutorial web site is exactly what I need. The
>>>>> documentation page in Linux touched on the media-ctl links, but it
>>>>> didn't explain the syntax or the mapping. This graphical
>>>>> interpretation really helps it make more sense.
>>>> Is capturing working well on your i.MX6 board now?
>>> Fabio,
>>>
>>> Unfortunately, no. I built the rootfs based on Jagan's instructions
>>> at https://openedev.amarulasolutions.com/display/ODWIKI/i.CoreM6+1.5
>>>
>>> I tried building both the 4.15-RC6 kernel, a 4.19 kernel and a 4.14 LTS kernel.
>>>
>>> Using the suggested method of generating the graphical display of the
>>> pipeline options, I am able to enable various pipeline options
>>> connecting different /dev/videoX options tot he camera. I have tried
>>> both the suggested method above as well as the instructions found in
>>> Documentation/media/v4l-drivers/imx.rst for their respective kernels,
>>> and I have tried multiple options to capture through
>>> ipu1_csi1_capture, ipu2_csi1_capture, and ip1_ic_prepenc capture, and
>>> all yield a broken pipe.
>>>
>>> libv4l2: error turning on stream: Broken pipe
>>> ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Could
>>> not read from resource.
>>> Additional debug info:
>>> gstv4l2bufferpool.c(1064): gst_v4l2_buffer_pool_poll ():
>>> /GstPipeline:pipeline0/GstV4l2Src:v4l2src0:
>>> poll error 1: Broken pipe (32)
>>>
>>> I can hear the camera click when I start gstreamer and click again
>>> when it stops trying to stream.
>>>
>>> dmesg indicates a broken pipe as well..
>>>
>>> [ 2419.851502] ipu2_csi1: pipeline start failed with -32
>>>
>>> might you have any suggestions?
>>
>> This -EPIPE error might mean you have a mis-match of resolution, pixel
>> format, or field type between one of the source->sink pad links. You can
>> find out which pads have a mis-match by enabling dynamic debug in the
>> kernel function __media_pipeline_start.
> Following Jagan's suggestion, I tried to make sure all the resolution
> and pixel formats were set the same between each source and sink.
>
> media-ctl --set-v4l2 "'ov5640 2-0010':0[fmt:UYVY2X8/640x480
> field:none]"
> media-ctl --set-v4l2 "'imx6-mipi-csi2':1[fmt:UYVY2X8/640x480
> field:none]"
> media-ctl --set-v4l2 "'ipu1_csi0_mux':2[fmt:UYVY2X8/640x480
> field:none]"
> media-ctl --set-v4l2 "'ipu1_csi0':2[fmt:AYUV32/640x480 field:none]"
>
>> Also make sure you are attempting to stream from the correct /dev/videoN.
> I have graphically plotted the pipeline using media-ctl --print-dot
> and I can see the proper video is routed, but your dynamic debug
> suggestion yielded something:
>
> imx-media capture-subsystem: link validation failed for 'ov5640
> 2-0010':0 -> 'imx6-mipi-csi2':0, error -32
It's what I expected, you have a format mismatch between those pads.
Steve
>
> I am assume this means the interface between the camera and the csi2
> isn't working. I am going to double check the power rails and the
> clocks. i can hear it click when activated and deactivated, so
> something is happening.
>
> adam
>
>> Steve
>>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
2018-10-23 17:39 ` Steve Longerbeam
@ 2018-10-23 17:54 ` Adam Ford
2018-10-23 18:11 ` Steve Longerbeam
2018-10-23 23:03 ` jacopo mondi
0 siblings, 2 replies; 38+ messages in thread
From: Adam Ford @ 2018-10-23 17:54 UTC (permalink / raw)
To: steve_longerbeam
Cc: Fabio Estevam, jacopo, Jagan Teki, p.zabel, Fabio Estevam,
gstreamer-devel, linux-media, Linux Kernel Mailing List
On Tue, Oct 23, 2018 at 12:39 PM Steve Longerbeam
<steve_longerbeam@mentor.com> wrote:
>
>
> On 10/23/18 10:34 AM, Adam Ford wrote:
> > On Tue, Oct 23, 2018 at 11:36 AM Steve Longerbeam
> > <steve_longerbeam@mentor.com> wrote:
> >> Hi Adam,
> >>
> >> On 10/23/18 8:19 AM, Adam Ford wrote:
> >>> On Mon, Oct 22, 2018 at 7:40 AM Fabio Estevam <festevam@gmail.com> wrote:
> >>>> Hi Adam,
> >>>>
> >>>> On Mon, Oct 22, 2018 at 9:37 AM Adam Ford <aford173@gmail.com> wrote:
> >>>>
> >>>>> Thank you! This tutorial web site is exactly what I need. The
> >>>>> documentation page in Linux touched on the media-ctl links, but it
> >>>>> didn't explain the syntax or the mapping. This graphical
> >>>>> interpretation really helps it make more sense.
> >>>> Is capturing working well on your i.MX6 board now?
> >>> Fabio,
> >>>
> >>> Unfortunately, no. I built the rootfs based on Jagan's instructions
> >>> at https://openedev.amarulasolutions.com/display/ODWIKI/i.CoreM6+1.5
> >>>
> >>> I tried building both the 4.15-RC6 kernel, a 4.19 kernel and a 4.14 LTS kernel.
> >>>
> >>> Using the suggested method of generating the graphical display of the
> >>> pipeline options, I am able to enable various pipeline options
> >>> connecting different /dev/videoX options tot he camera. I have tried
> >>> both the suggested method above as well as the instructions found in
> >>> Documentation/media/v4l-drivers/imx.rst for their respective kernels,
> >>> and I have tried multiple options to capture through
> >>> ipu1_csi1_capture, ipu2_csi1_capture, and ip1_ic_prepenc capture, and
> >>> all yield a broken pipe.
> >>>
> >>> libv4l2: error turning on stream: Broken pipe
> >>> ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Could
> >>> not read from resource.
> >>> Additional debug info:
> >>> gstv4l2bufferpool.c(1064): gst_v4l2_buffer_pool_poll ():
> >>> /GstPipeline:pipeline0/GstV4l2Src:v4l2src0:
> >>> poll error 1: Broken pipe (32)
> >>>
> >>> I can hear the camera click when I start gstreamer and click again
> >>> when it stops trying to stream.
> >>>
> >>> dmesg indicates a broken pipe as well..
> >>>
> >>> [ 2419.851502] ipu2_csi1: pipeline start failed with -32
> >>>
> >>> might you have any suggestions?
> >>
> >> This -EPIPE error might mean you have a mis-match of resolution, pixel
> >> format, or field type between one of the source->sink pad links. You can
> >> find out which pads have a mis-match by enabling dynamic debug in the
> >> kernel function __media_pipeline_start.
> > Following Jagan's suggestion, I tried to make sure all the resolution
> > and pixel formats were set the same between each source and sink.
> >
> > media-ctl --set-v4l2 "'ov5640 2-0010':0[fmt:UYVY2X8/640x480
> > field:none]"
> > media-ctl --set-v4l2 "'imx6-mipi-csi2':1[fmt:UYVY2X8/640x480
> > field:none]"
> > media-ctl --set-v4l2 "'ipu1_csi0_mux':2[fmt:UYVY2X8/640x480
> > field:none]"
> > media-ctl --set-v4l2 "'ipu1_csi0':2[fmt:AYUV32/640x480 field:none]"
> >
> >> Also make sure you are attempting to stream from the correct /dev/videoN.
> > I have graphically plotted the pipeline using media-ctl --print-dot
> > and I can see the proper video is routed, but your dynamic debug
> > suggestion yielded something:
> >
> > imx-media capture-subsystem: link validation failed for 'ov5640
> > 2-0010':0 -> 'imx6-mipi-csi2':0, error -32
>
>
> It's what I expected, you have a format mismatch between those pads.
Is the mismatch something I am doing wrong with:
media-ctl --set-v4l2 "'ov5640 2-0010':0[fmt:UYVY2X8/640x480 field:none]"
media-ctl --set-v4l2 "'imx6-mipi-csi2':2[fmt:UYVY2X8/640x480 field:none]"
or is there something else I need to do? I just used Jagan's suggestion.
adam
>
> Steve
>
>
> >
> > I am assume this means the interface between the camera and the csi2
> > isn't working. I am going to double check the power rails and the
> > clocks. i can hear it click when activated and deactivated, so
> > something is happening.
> >
> > adam
> >
> >> Steve
> >>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
2018-10-23 17:54 ` Adam Ford
@ 2018-10-23 18:11 ` Steve Longerbeam
2018-10-23 23:03 ` jacopo mondi
1 sibling, 0 replies; 38+ messages in thread
From: Steve Longerbeam @ 2018-10-23 18:11 UTC (permalink / raw)
To: Adam Ford
Cc: Fabio Estevam, jacopo, Jagan Teki, p.zabel, Fabio Estevam,
gstreamer-devel, linux-media, Linux Kernel Mailing List
On 10/23/18 10:54 AM, Adam Ford wrote:
> On Tue, Oct 23, 2018 at 12:39 PM Steve Longerbeam
> <steve_longerbeam@mentor.com> wrote:
>>
>> On 10/23/18 10:34 AM, Adam Ford wrote:
>>> On Tue, Oct 23, 2018 at 11:36 AM Steve Longerbeam
>>> <steve_longerbeam@mentor.com> wrote:
>>>> Hi Adam,
>>>>
>>>> On 10/23/18 8:19 AM, Adam Ford wrote:
>>>>> On Mon, Oct 22, 2018 at 7:40 AM Fabio Estevam <festevam@gmail.com> wrote:
>>>>>> Hi Adam,
>>>>>>
>>>>>> On Mon, Oct 22, 2018 at 9:37 AM Adam Ford <aford173@gmail.com> wrote:
>>>>>>
>>>>>>> Thank you! This tutorial web site is exactly what I need. The
>>>>>>> documentation page in Linux touched on the media-ctl links, but it
>>>>>>> didn't explain the syntax or the mapping. This graphical
>>>>>>> interpretation really helps it make more sense.
>>>>>> Is capturing working well on your i.MX6 board now?
>>>>> Fabio,
>>>>>
>>>>> Unfortunately, no. I built the rootfs based on Jagan's instructions
>>>>> at https://openedev.amarulasolutions.com/display/ODWIKI/i.CoreM6+1.5
>>>>>
>>>>> I tried building both the 4.15-RC6 kernel, a 4.19 kernel and a 4.14 LTS kernel.
>>>>>
>>>>> Using the suggested method of generating the graphical display of the
>>>>> pipeline options, I am able to enable various pipeline options
>>>>> connecting different /dev/videoX options tot he camera. I have tried
>>>>> both the suggested method above as well as the instructions found in
>>>>> Documentation/media/v4l-drivers/imx.rst for their respective kernels,
>>>>> and I have tried multiple options to capture through
>>>>> ipu1_csi1_capture, ipu2_csi1_capture, and ip1_ic_prepenc capture, and
>>>>> all yield a broken pipe.
>>>>>
>>>>> libv4l2: error turning on stream: Broken pipe
>>>>> ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Could
>>>>> not read from resource.
>>>>> Additional debug info:
>>>>> gstv4l2bufferpool.c(1064): gst_v4l2_buffer_pool_poll ():
>>>>> /GstPipeline:pipeline0/GstV4l2Src:v4l2src0:
>>>>> poll error 1: Broken pipe (32)
>>>>>
>>>>> I can hear the camera click when I start gstreamer and click again
>>>>> when it stops trying to stream.
>>>>>
>>>>> dmesg indicates a broken pipe as well..
>>>>>
>>>>> [ 2419.851502] ipu2_csi1: pipeline start failed with -32
>>>>>
>>>>> might you have any suggestions?
>>>> This -EPIPE error might mean you have a mis-match of resolution, pixel
>>>> format, or field type between one of the source->sink pad links. You can
>>>> find out which pads have a mis-match by enabling dynamic debug in the
>>>> kernel function __media_pipeline_start.
>>> Following Jagan's suggestion, I tried to make sure all the resolution
>>> and pixel formats were set the same between each source and sink.
>>>
>>> media-ctl --set-v4l2 "'ov5640 2-0010':0[fmt:UYVY2X8/640x480
>>> field:none]"
>>> media-ctl --set-v4l2 "'imx6-mipi-csi2':1[fmt:UYVY2X8/640x480
>>> field:none]"
>>> media-ctl --set-v4l2 "'ipu1_csi0_mux':2[fmt:UYVY2X8/640x480
>>> field:none]"
>>> media-ctl --set-v4l2 "'ipu1_csi0':2[fmt:AYUV32/640x480 field:none]"
>>>
>>>> Also make sure you are attempting to stream from the correct /dev/videoN.
>>> I have graphically plotted the pipeline using media-ctl --print-dot
>>> and I can see the proper video is routed, but your dynamic debug
>>> suggestion yielded something:
>>>
>>> imx-media capture-subsystem: link validation failed for 'ov5640
>>> 2-0010':0 -> 'imx6-mipi-csi2':0, error -32
>>
>> It's what I expected, you have a format mismatch between those pads.
> Is the mismatch something I am doing wrong with:
>
> media-ctl --set-v4l2 "'ov5640 2-0010':0[fmt:UYVY2X8/640x480 field:none]"
> media-ctl --set-v4l2 "'imx6-mipi-csi2':2[fmt:UYVY2X8/640x480 field:none]"
>
> or is there something else I need to do? I just used Jagan's suggestion.
Yeah, that looks correct, media-ctl _should_ automatically propagate the
format at 'ov5640 2-0010':0 to 'imx6-mipi-csi2':0. What version of
media-ctl are you using? If you have an older version of media-ctl tool
that doesn't propagate formats from source->sink pads, you'll have to
explicitly set the format at 'imx6-mipi-csi2':0, and at all the other
sink pads in your pipeline. Better yet, upgrade! :)
Steve
>
>>> I am assume this means the interface between the camera and the csi2
>>> isn't working. I am going to double check the power rails and the
>>> clocks. i can hear it click when activated and deactivated, so
>>> something is happening.
>>>
>>> adam
>>>
>>>> Steve
>>>>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
2018-10-23 17:54 ` Adam Ford
2018-10-23 18:11 ` Steve Longerbeam
@ 2018-10-23 23:03 ` jacopo mondi
2018-10-24 13:53 ` Adam Ford
1 sibling, 1 reply; 38+ messages in thread
From: jacopo mondi @ 2018-10-23 23:03 UTC (permalink / raw)
To: Adam Ford
Cc: steve_longerbeam, Fabio Estevam, Jagan Teki, p.zabel,
Fabio Estevam, gstreamer-devel, linux-media,
Linux Kernel Mailing List
[-- Attachment #1: Type: text/plain, Size: 4783 bytes --]
Hi Adam,
On Tue, Oct 23, 2018 at 12:54:12PM -0500, Adam Ford wrote:
> On Tue, Oct 23, 2018 at 12:39 PM Steve Longerbeam
> <steve_longerbeam@mentor.com> wrote:
> >
> >
> > On 10/23/18 10:34 AM, Adam Ford wrote:
> > > On Tue, Oct 23, 2018 at 11:36 AM Steve Longerbeam
> > > <steve_longerbeam@mentor.com> wrote:
> > >> Hi Adam,
> > >>
> > >> On 10/23/18 8:19 AM, Adam Ford wrote:
> > >>> On Mon, Oct 22, 2018 at 7:40 AM Fabio Estevam <festevam@gmail.com> wrote:
> > >>>> Hi Adam,
> > >>>>
> > >>>> On Mon, Oct 22, 2018 at 9:37 AM Adam Ford <aford173@gmail.com> wrote:
> > >>>>
> > >>>>> Thank you! This tutorial web site is exactly what I need. The
> > >>>>> documentation page in Linux touched on the media-ctl links, but it
> > >>>>> didn't explain the syntax or the mapping. This graphical
> > >>>>> interpretation really helps it make more sense.
> > >>>> Is capturing working well on your i.MX6 board now?
> > >>> Fabio,
> > >>>
> > >>> Unfortunately, no. I built the rootfs based on Jagan's instructions
> > >>> at https://openedev.amarulasolutions.com/display/ODWIKI/i.CoreM6+1.5
> > >>>
> > >>> I tried building both the 4.15-RC6 kernel, a 4.19 kernel and a 4.14 LTS kernel.
> > >>>
> > >>> Using the suggested method of generating the graphical display of the
> > >>> pipeline options, I am able to enable various pipeline options
> > >>> connecting different /dev/videoX options tot he camera. I have tried
> > >>> both the suggested method above as well as the instructions found in
> > >>> Documentation/media/v4l-drivers/imx.rst for their respective kernels,
> > >>> and I have tried multiple options to capture through
> > >>> ipu1_csi1_capture, ipu2_csi1_capture, and ip1_ic_prepenc capture, and
> > >>> all yield a broken pipe.
> > >>>
> > >>> libv4l2: error turning on stream: Broken pipe
> > >>> ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Could
> > >>> not read from resource.
> > >>> Additional debug info:
> > >>> gstv4l2bufferpool.c(1064): gst_v4l2_buffer_pool_poll ():
> > >>> /GstPipeline:pipeline0/GstV4l2Src:v4l2src0:
> > >>> poll error 1: Broken pipe (32)
> > >>>
> > >>> I can hear the camera click when I start gstreamer and click again
> > >>> when it stops trying to stream.
> > >>>
> > >>> dmesg indicates a broken pipe as well..
> > >>>
> > >>> [ 2419.851502] ipu2_csi1: pipeline start failed with -32
> > >>>
> > >>> might you have any suggestions?
> > >>
> > >> This -EPIPE error might mean you have a mis-match of resolution, pixel
> > >> format, or field type between one of the source->sink pad links. You can
> > >> find out which pads have a mis-match by enabling dynamic debug in the
> > >> kernel function __media_pipeline_start.
> > > Following Jagan's suggestion, I tried to make sure all the resolution
> > > and pixel formats were set the same between each source and sink.
> > >
> > > media-ctl --set-v4l2 "'ov5640 2-0010':0[fmt:UYVY2X8/640x480
> > > field:none]"
> > > media-ctl --set-v4l2 "'imx6-mipi-csi2':1[fmt:UYVY2X8/640x480
> > > field:none]"
> > > media-ctl --set-v4l2 "'ipu1_csi0_mux':2[fmt:UYVY2X8/640x480
> > > field:none]"
> > > media-ctl --set-v4l2 "'ipu1_csi0':2[fmt:AYUV32/640x480 field:none]"
> > >
> > >> Also make sure you are attempting to stream from the correct /dev/videoN.
> > > I have graphically plotted the pipeline using media-ctl --print-dot
> > > and I can see the proper video is routed, but your dynamic debug
> > > suggestion yielded something:
> > >
> > > imx-media capture-subsystem: link validation failed for 'ov5640
> > > 2-0010':0 -> 'imx6-mipi-csi2':0, error -32
> >
> >
> > It's what I expected, you have a format mismatch between those pads.
>
> Is the mismatch something I am doing wrong with:
>
> media-ctl --set-v4l2 "'ov5640 2-0010':0[fmt:UYVY2X8/640x480 field:none]"
> media-ctl --set-v4l2 "'imx6-mipi-csi2':2[fmt:UYVY2X8/640x480 field:none]"
>
Could you try to verify the actual format configured on the sensor?
(media-ctl --get-v4l2 "'ov5640 2-0010':0").
Depending on the driver version you are running, you might be affected
by different regressions.
> or is there something else I need to do? I just used Jagan's suggestion.
I suggest you to update the driver version to the last one available
in the media-tree master, or at least try to backport the following
commit:
fb98e29 media: ov5640: fix mode change regression
If it turns out the format and mode configured on the sensor do not
match the one you want.
Thanks
j
> adam
> >
> > Steve
> >
> >
> > >
> > > I am assume this means the interface between the camera and the csi2
> > > isn't working. I am going to double check the power rails and the
> > > clocks. i can hear it click when activated and deactivated, so
> > > something is happening.
> > >
> > > adam
> > >
> > >> Steve
> > >>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
2018-10-23 23:03 ` jacopo mondi
@ 2018-10-24 13:53 ` Adam Ford
2018-10-24 14:08 ` jacopo mondi
0 siblings, 1 reply; 38+ messages in thread
From: Adam Ford @ 2018-10-24 13:53 UTC (permalink / raw)
To: jacopo
Cc: steve_longerbeam, Fabio Estevam, Jagan Teki, p.zabel,
Fabio Estevam, gstreamer-devel, linux-media,
Linux Kernel Mailing List
On Tue, Oct 23, 2018 at 6:03 PM jacopo mondi <jacopo@jmondi.org> wrote:
>
> Hi Adam,
>
> On Tue, Oct 23, 2018 at 12:54:12PM -0500, Adam Ford wrote:
> > On Tue, Oct 23, 2018 at 12:39 PM Steve Longerbeam
> > <steve_longerbeam@mentor.com> wrote:
> > >
> > >
> > > On 10/23/18 10:34 AM, Adam Ford wrote:
> > > > On Tue, Oct 23, 2018 at 11:36 AM Steve Longerbeam
> > > > <steve_longerbeam@mentor.com> wrote:
> > > >> Hi Adam,
> > > >>
> > > >> On 10/23/18 8:19 AM, Adam Ford wrote:
> > > >>> On Mon, Oct 22, 2018 at 7:40 AM Fabio Estevam <festevam@gmail.com> wrote:
> > > >>>> Hi Adam,
> > > >>>>
> > > >>>> On Mon, Oct 22, 2018 at 9:37 AM Adam Ford <aford173@gmail.com> wrote:
> > > >>>>
> > > >>>>> Thank you! This tutorial web site is exactly what I need. The
> > > >>>>> documentation page in Linux touched on the media-ctl links, but it
> > > >>>>> didn't explain the syntax or the mapping. This graphical
> > > >>>>> interpretation really helps it make more sense.
> > > >>>> Is capturing working well on your i.MX6 board now?
> > > >>> Fabio,
> > > >>>
> > > >>> Unfortunately, no. I built the rootfs based on Jagan's instructions
> > > >>> at https://openedev.amarulasolutions.com/display/ODWIKI/i.CoreM6+1.5
> > > >>>
> > > >>> I tried building both the 4.15-RC6 kernel, a 4.19 kernel and a 4.14 LTS kernel.
> > > >>>
> > > >>> Using the suggested method of generating the graphical display of the
> > > >>> pipeline options, I am able to enable various pipeline options
> > > >>> connecting different /dev/videoX options tot he camera. I have tried
> > > >>> both the suggested method above as well as the instructions found in
> > > >>> Documentation/media/v4l-drivers/imx.rst for their respective kernels,
> > > >>> and I have tried multiple options to capture through
> > > >>> ipu1_csi1_capture, ipu2_csi1_capture, and ip1_ic_prepenc capture, and
> > > >>> all yield a broken pipe.
> > > >>>
> > > >>> libv4l2: error turning on stream: Broken pipe
> > > >>> ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Could
> > > >>> not read from resource.
> > > >>> Additional debug info:
> > > >>> gstv4l2bufferpool.c(1064): gst_v4l2_buffer_pool_poll ():
> > > >>> /GstPipeline:pipeline0/GstV4l2Src:v4l2src0:
> > > >>> poll error 1: Broken pipe (32)
> > > >>>
> > > >>> I can hear the camera click when I start gstreamer and click again
> > > >>> when it stops trying to stream.
> > > >>>
> > > >>> dmesg indicates a broken pipe as well..
> > > >>>
> > > >>> [ 2419.851502] ipu2_csi1: pipeline start failed with -32
> > > >>>
> > > >>> might you have any suggestions?
> > > >>
> > > >> This -EPIPE error might mean you have a mis-match of resolution, pixel
> > > >> format, or field type between one of the source->sink pad links. You can
> > > >> find out which pads have a mis-match by enabling dynamic debug in the
> > > >> kernel function __media_pipeline_start.
> > > > Following Jagan's suggestion, I tried to make sure all the resolution
> > > > and pixel formats were set the same between each source and sink.
> > > >
> > > > media-ctl --set-v4l2 "'ov5640 2-0010':0[fmt:UYVY2X8/640x480
> > > > field:none]"
> > > > media-ctl --set-v4l2 "'imx6-mipi-csi2':1[fmt:UYVY2X8/640x480
> > > > field:none]"
> > > > media-ctl --set-v4l2 "'ipu1_csi0_mux':2[fmt:UYVY2X8/640x480
> > > > field:none]"
> > > > media-ctl --set-v4l2 "'ipu1_csi0':2[fmt:AYUV32/640x480 field:none]"
> > > >
> > > >> Also make sure you are attempting to stream from the correct /dev/videoN.
> > > > I have graphically plotted the pipeline using media-ctl --print-dot
> > > > and I can see the proper video is routed, but your dynamic debug
> > > > suggestion yielded something:
> > > >
> > > > imx-media capture-subsystem: link validation failed for 'ov5640
> > > > 2-0010':0 -> 'imx6-mipi-csi2':0, error -32
> > >
> > >
> > > It's what I expected, you have a format mismatch between those pads.
> >
> > Is the mismatch something I am doing wrong with:
> >
> > media-ctl --set-v4l2 "'ov5640 2-0010':0[fmt:UYVY2X8/640x480 field:none]"
> > media-ctl --set-v4l2 "'imx6-mipi-csi2':2[fmt:UYVY2X8/640x480 field:none]"
> >
>
> Could you try to verify the actual format configured on the sensor?
> (media-ctl --get-v4l2 "'ov5640 2-0010':0").
>
> Depending on the driver version you are running, you might be affected
> by different regressions.
>
> > or is there something else I need to do? I just used Jagan's suggestion.
>
> I suggest you to update the driver version to the last one available
> in the media-tree master, or at least try to backport the following
> commit:
> fb98e29 media: ov5640: fix mode change regression
>
> If it turns out the format and mode configured on the sensor do not
> match the one you want.
>
> Thanks
That got me past one hurdle. Wtih your help, I was able to confirm
the mis-match of the modes between the sensor and the csi1 source. I
applied the patch as you suggested, but now I get a new error.
[ 295.294370] imx6-mipi-csi2: LP-11 timeout, phy_state = 0x00000230
[ 295.300681] ipu1_csi0: pipeline start failed with -110
I am going to go through various patches to the imx framework and
ov5640 driver to see if I can find the solution, but if you have
suggestions as to which fixes are appropriate, I'll test those. If I
can get this working, would it make sense for me to submit some
requests with kernel-stable to backport some of these commits to 4.19
and if applicable, 4.14 too?
adam
> j
>
> > adam
> > >
> > > Steve
> > >
> > >
> > > >
> > > > I am assume this means the interface between the camera and the csi2
> > > > isn't working. I am going to double check the power rails and the
> > > > clocks. i can hear it click when activated and deactivated, so
> > > > something is happening.
> > > >
> > > > adam
> > > >
> > > >> Steve
> > > >>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
2018-10-24 13:53 ` Adam Ford
@ 2018-10-24 14:08 ` jacopo mondi
2018-10-24 14:17 ` Adam Ford
0 siblings, 1 reply; 38+ messages in thread
From: jacopo mondi @ 2018-10-24 14:08 UTC (permalink / raw)
To: Adam Ford
Cc: steve_longerbeam, Fabio Estevam, Jagan Teki, p.zabel,
Fabio Estevam, gstreamer-devel, linux-media,
Linux Kernel Mailing List
[-- Attachment #1: Type: text/plain, Size: 6704 bytes --]
Hi Adam,
On Wed, Oct 24, 2018 at 08:53:41AM -0500, Adam Ford wrote:
> On Tue, Oct 23, 2018 at 6:03 PM jacopo mondi <jacopo@jmondi.org> wrote:
> >
> > Hi Adam,
> >
> > On Tue, Oct 23, 2018 at 12:54:12PM -0500, Adam Ford wrote:
> > > On Tue, Oct 23, 2018 at 12:39 PM Steve Longerbeam
> > > <steve_longerbeam@mentor.com> wrote:
> > > >
> > > >
> > > > On 10/23/18 10:34 AM, Adam Ford wrote:
> > > > > On Tue, Oct 23, 2018 at 11:36 AM Steve Longerbeam
> > > > > <steve_longerbeam@mentor.com> wrote:
> > > > >> Hi Adam,
> > > > >>
> > > > >> On 10/23/18 8:19 AM, Adam Ford wrote:
> > > > >>> On Mon, Oct 22, 2018 at 7:40 AM Fabio Estevam <festevam@gmail.com> wrote:
> > > > >>>> Hi Adam,
> > > > >>>>
> > > > >>>> On Mon, Oct 22, 2018 at 9:37 AM Adam Ford <aford173@gmail.com> wrote:
> > > > >>>>
> > > > >>>>> Thank you! This tutorial web site is exactly what I need. The
> > > > >>>>> documentation page in Linux touched on the media-ctl links, but it
> > > > >>>>> didn't explain the syntax or the mapping. This graphical
> > > > >>>>> interpretation really helps it make more sense.
> > > > >>>> Is capturing working well on your i.MX6 board now?
> > > > >>> Fabio,
> > > > >>>
> > > > >>> Unfortunately, no. I built the rootfs based on Jagan's instructions
> > > > >>> at https://openedev.amarulasolutions.com/display/ODWIKI/i.CoreM6+1.5
> > > > >>>
> > > > >>> I tried building both the 4.15-RC6 kernel, a 4.19 kernel and a 4.14 LTS kernel.
> > > > >>>
> > > > >>> Using the suggested method of generating the graphical display of the
> > > > >>> pipeline options, I am able to enable various pipeline options
> > > > >>> connecting different /dev/videoX options tot he camera. I have tried
> > > > >>> both the suggested method above as well as the instructions found in
> > > > >>> Documentation/media/v4l-drivers/imx.rst for their respective kernels,
> > > > >>> and I have tried multiple options to capture through
> > > > >>> ipu1_csi1_capture, ipu2_csi1_capture, and ip1_ic_prepenc capture, and
> > > > >>> all yield a broken pipe.
> > > > >>>
> > > > >>> libv4l2: error turning on stream: Broken pipe
> > > > >>> ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Could
> > > > >>> not read from resource.
> > > > >>> Additional debug info:
> > > > >>> gstv4l2bufferpool.c(1064): gst_v4l2_buffer_pool_poll ():
> > > > >>> /GstPipeline:pipeline0/GstV4l2Src:v4l2src0:
> > > > >>> poll error 1: Broken pipe (32)
> > > > >>>
> > > > >>> I can hear the camera click when I start gstreamer and click again
> > > > >>> when it stops trying to stream.
> > > > >>>
> > > > >>> dmesg indicates a broken pipe as well..
> > > > >>>
> > > > >>> [ 2419.851502] ipu2_csi1: pipeline start failed with -32
> > > > >>>
> > > > >>> might you have any suggestions?
> > > > >>
> > > > >> This -EPIPE error might mean you have a mis-match of resolution, pixel
> > > > >> format, or field type between one of the source->sink pad links. You can
> > > > >> find out which pads have a mis-match by enabling dynamic debug in the
> > > > >> kernel function __media_pipeline_start.
> > > > > Following Jagan's suggestion, I tried to make sure all the resolution
> > > > > and pixel formats were set the same between each source and sink.
> > > > >
> > > > > media-ctl --set-v4l2 "'ov5640 2-0010':0[fmt:UYVY2X8/640x480
> > > > > field:none]"
> > > > > media-ctl --set-v4l2 "'imx6-mipi-csi2':1[fmt:UYVY2X8/640x480
> > > > > field:none]"
> > > > > media-ctl --set-v4l2 "'ipu1_csi0_mux':2[fmt:UYVY2X8/640x480
> > > > > field:none]"
> > > > > media-ctl --set-v4l2 "'ipu1_csi0':2[fmt:AYUV32/640x480 field:none]"
> > > > >
> > > > >> Also make sure you are attempting to stream from the correct /dev/videoN.
> > > > > I have graphically plotted the pipeline using media-ctl --print-dot
> > > > > and I can see the proper video is routed, but your dynamic debug
> > > > > suggestion yielded something:
> > > > >
> > > > > imx-media capture-subsystem: link validation failed for 'ov5640
> > > > > 2-0010':0 -> 'imx6-mipi-csi2':0, error -32
> > > >
> > > >
> > > > It's what I expected, you have a format mismatch between those pads.
> > >
> > > Is the mismatch something I am doing wrong with:
> > >
> > > media-ctl --set-v4l2 "'ov5640 2-0010':0[fmt:UYVY2X8/640x480 field:none]"
> > > media-ctl --set-v4l2 "'imx6-mipi-csi2':2[fmt:UYVY2X8/640x480 field:none]"
> > >
> >
> > Could you try to verify the actual format configured on the sensor?
> > (media-ctl --get-v4l2 "'ov5640 2-0010':0").
> >
> > Depending on the driver version you are running, you might be affected
> > by different regressions.
> >
> > > or is there something else I need to do? I just used Jagan's suggestion.
> >
> > I suggest you to update the driver version to the last one available
> > in the media-tree master, or at least try to backport the following
> > commit:
> > fb98e29 media: ov5640: fix mode change regression
> >
> > If it turns out the format and mode configured on the sensor do not
> > match the one you want.
> >
> > Thanks
>
> That got me past one hurdle. Wtih your help, I was able to confirm
> the mis-match of the modes between the sensor and the csi1 source. I
> applied the patch as you suggested, but now I get a new error.
>
> [ 295.294370] imx6-mipi-csi2: LP-11 timeout, phy_state = 0x00000230
> [ 295.300681] ipu1_csi0: pipeline start failed with -110
>
>
Here you go:
bad1774 media: ov5640: Fix timings setup code
aa4bb8b media: ov5640: Re-work MIPI startup sequence
Please update your ov5640 driver to the last version available on
linux-media master repository. There have been a looot of developments
and fixes recently (and I would be happy to know if they have helped
you)
> I am going to go through various patches to the imx framework and
> ov5640 driver to see if I can find the solution, but if you have
> suggestions as to which fixes are appropriate, I'll test those. If I
Just get what's on linux-media master tree.
> can get this working, would it make sense for me to submit some
> requests with kernel-stable to backport some of these commits to 4.19
> and if applicable, 4.14 too?
Sure it will (even if I'm not familiar with the procedure used to tag
patches to be applied to stable. I would just apply everything that's
on the latest media tree)
Keep us posted!
j
>
> adam
> > j
> >
> > > adam
> > > >
> > > > Steve
> > > >
> > > >
> > > > >
> > > > > I am assume this means the interface between the camera and the csi2
> > > > > isn't working. I am going to double check the power rails and the
> > > > > clocks. i can hear it click when activated and deactivated, so
> > > > > something is happening.
> > > > >
> > > > > adam
> > > > >
> > > > >> Steve
> > > > >>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
2018-10-24 14:08 ` jacopo mondi
@ 2018-10-24 14:17 ` Adam Ford
2018-10-28 18:57 ` Adam Ford
0 siblings, 1 reply; 38+ messages in thread
From: Adam Ford @ 2018-10-24 14:17 UTC (permalink / raw)
To: jacopo
Cc: steve_longerbeam, Fabio Estevam, Jagan Teki, p.zabel,
Fabio Estevam, gstreamer-devel, linux-media,
Linux Kernel Mailing List
On Wed, Oct 24, 2018 at 9:08 AM jacopo mondi <jacopo@jmondi.org> wrote:
>
> Hi Adam,
>
> On Wed, Oct 24, 2018 at 08:53:41AM -0500, Adam Ford wrote:
> > On Tue, Oct 23, 2018 at 6:03 PM jacopo mondi <jacopo@jmondi.org> wrote:
> > >
> > > Hi Adam,
> > >
> > > On Tue, Oct 23, 2018 at 12:54:12PM -0500, Adam Ford wrote:
> > > > On Tue, Oct 23, 2018 at 12:39 PM Steve Longerbeam
> > > > <steve_longerbeam@mentor.com> wrote:
> > > > >
> > > > >
> > > > > On 10/23/18 10:34 AM, Adam Ford wrote:
> > > > > > On Tue, Oct 23, 2018 at 11:36 AM Steve Longerbeam
> > > > > > <steve_longerbeam@mentor.com> wrote:
> > > > > >> Hi Adam,
> > > > > >>
> > > > > >> On 10/23/18 8:19 AM, Adam Ford wrote:
> > > > > >>> On Mon, Oct 22, 2018 at 7:40 AM Fabio Estevam <festevam@gmail.com> wrote:
> > > > > >>>> Hi Adam,
> > > > > >>>>
> > > > > >>>> On Mon, Oct 22, 2018 at 9:37 AM Adam Ford <aford173@gmail.com> wrote:
> > > > > >>>>
> > > > > >>>>> Thank you! This tutorial web site is exactly what I need. The
> > > > > >>>>> documentation page in Linux touched on the media-ctl links, but it
> > > > > >>>>> didn't explain the syntax or the mapping. This graphical
> > > > > >>>>> interpretation really helps it make more sense.
> > > > > >>>> Is capturing working well on your i.MX6 board now?
> > > > > >>> Fabio,
> > > > > >>>
> > > > > >>> Unfortunately, no. I built the rootfs based on Jagan's instructions
> > > > > >>> at https://openedev.amarulasolutions.com/display/ODWIKI/i.CoreM6+1.5
> > > > > >>>
> > > > > >>> I tried building both the 4.15-RC6 kernel, a 4.19 kernel and a 4.14 LTS kernel.
> > > > > >>>
> > > > > >>> Using the suggested method of generating the graphical display of the
> > > > > >>> pipeline options, I am able to enable various pipeline options
> > > > > >>> connecting different /dev/videoX options tot he camera. I have tried
> > > > > >>> both the suggested method above as well as the instructions found in
> > > > > >>> Documentation/media/v4l-drivers/imx.rst for their respective kernels,
> > > > > >>> and I have tried multiple options to capture through
> > > > > >>> ipu1_csi1_capture, ipu2_csi1_capture, and ip1_ic_prepenc capture, and
> > > > > >>> all yield a broken pipe.
> > > > > >>>
> > > > > >>> libv4l2: error turning on stream: Broken pipe
> > > > > >>> ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Could
> > > > > >>> not read from resource.
> > > > > >>> Additional debug info:
> > > > > >>> gstv4l2bufferpool.c(1064): gst_v4l2_buffer_pool_poll ():
> > > > > >>> /GstPipeline:pipeline0/GstV4l2Src:v4l2src0:
> > > > > >>> poll error 1: Broken pipe (32)
> > > > > >>>
> > > > > >>> I can hear the camera click when I start gstreamer and click again
> > > > > >>> when it stops trying to stream.
> > > > > >>>
> > > > > >>> dmesg indicates a broken pipe as well..
> > > > > >>>
> > > > > >>> [ 2419.851502] ipu2_csi1: pipeline start failed with -32
> > > > > >>>
> > > > > >>> might you have any suggestions?
> > > > > >>
> > > > > >> This -EPIPE error might mean you have a mis-match of resolution, pixel
> > > > > >> format, or field type between one of the source->sink pad links. You can
> > > > > >> find out which pads have a mis-match by enabling dynamic debug in the
> > > > > >> kernel function __media_pipeline_start.
> > > > > > Following Jagan's suggestion, I tried to make sure all the resolution
> > > > > > and pixel formats were set the same between each source and sink.
> > > > > >
> > > > > > media-ctl --set-v4l2 "'ov5640 2-0010':0[fmt:UYVY2X8/640x480
> > > > > > field:none]"
> > > > > > media-ctl --set-v4l2 "'imx6-mipi-csi2':1[fmt:UYVY2X8/640x480
> > > > > > field:none]"
> > > > > > media-ctl --set-v4l2 "'ipu1_csi0_mux':2[fmt:UYVY2X8/640x480
> > > > > > field:none]"
> > > > > > media-ctl --set-v4l2 "'ipu1_csi0':2[fmt:AYUV32/640x480 field:none]"
> > > > > >
> > > > > >> Also make sure you are attempting to stream from the correct /dev/videoN.
> > > > > > I have graphically plotted the pipeline using media-ctl --print-dot
> > > > > > and I can see the proper video is routed, but your dynamic debug
> > > > > > suggestion yielded something:
> > > > > >
> > > > > > imx-media capture-subsystem: link validation failed for 'ov5640
> > > > > > 2-0010':0 -> 'imx6-mipi-csi2':0, error -32
> > > > >
> > > > >
> > > > > It's what I expected, you have a format mismatch between those pads.
> > > >
> > > > Is the mismatch something I am doing wrong with:
> > > >
> > > > media-ctl --set-v4l2 "'ov5640 2-0010':0[fmt:UYVY2X8/640x480 field:none]"
> > > > media-ctl --set-v4l2 "'imx6-mipi-csi2':2[fmt:UYVY2X8/640x480 field:none]"
> > > >
> > >
> > > Could you try to verify the actual format configured on the sensor?
> > > (media-ctl --get-v4l2 "'ov5640 2-0010':0").
> > >
> > > Depending on the driver version you are running, you might be affected
> > > by different regressions.
> > >
> > > > or is there something else I need to do? I just used Jagan's suggestion.
> > >
> > > I suggest you to update the driver version to the last one available
> > > in the media-tree master, or at least try to backport the following
> > > commit:
> > > fb98e29 media: ov5640: fix mode change regression
> > >
> > > If it turns out the format and mode configured on the sensor do not
> > > match the one you want.
> > >
> > > Thanks
> >
> > That got me past one hurdle. Wtih your help, I was able to confirm
> > the mis-match of the modes between the sensor and the csi1 source. I
> > applied the patch as you suggested, but now I get a new error.
> >
> > [ 295.294370] imx6-mipi-csi2: LP-11 timeout, phy_state = 0x00000230
> > [ 295.300681] ipu1_csi0: pipeline start failed with -110
> >
> >
>
> Here you go:
> bad1774 media: ov5640: Fix timings setup code
> aa4bb8b media: ov5640: Re-work MIPI startup sequence
>
> Please update your ov5640 driver to the last version available on
> linux-media master repository. There have been a looot of developments
> and fixes recently (and I would be happy to know if they have helped
> you)
>
> > I am going to go through various patches to the imx framework and
> > ov5640 driver to see if I can find the solution, but if you have
> > suggestions as to which fixes are appropriate, I'll test those. If I
>
> Just get what's on linux-media master tree.
>
> > can get this working, would it make sense for me to submit some
> > requests with kernel-stable to backport some of these commits to 4.19
> > and if applicable, 4.14 too?
>
> Sure it will (even if I'm not familiar with the procedure used to tag
> patches to be applied to stable. I would just apply everything that's
> on the latest media tree)
>
> Keep us posted!
Thank you everyone for your help. I pulled the linux-media master and
built it, and it works perfectly from what I can tell. I'll go through
the patch list and see what's back-port-able to 4.19. I noticed that
just copying the ov5640.c driver breaks the build on 4.19.0, so I'm
going to focus on just patches labeled 'fix' on both the ov5640 for
now.
I appreciate everyone's help, and Iearned a lot about the v4l system
in the process.
adam
> j
> >
> > adam
> > > j
> > >
> > > > adam
> > > > >
> > > > > Steve
> > > > >
> > > > >
> > > > > >
> > > > > > I am assume this means the interface between the camera and the csi2
> > > > > > isn't working. I am going to double check the power rails and the
> > > > > > clocks. i can hear it click when activated and deactivated, so
> > > > > > something is happening.
> > > > > >
> > > > > > adam
> > > > > >
> > > > > >> Steve
> > > > > >>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
2018-10-24 14:17 ` Adam Ford
@ 2018-10-28 18:57 ` Adam Ford
2018-10-29 13:49 ` Fabio Estevam
0 siblings, 1 reply; 38+ messages in thread
From: Adam Ford @ 2018-10-28 18:57 UTC (permalink / raw)
To: jacopo
Cc: steve_longerbeam, Fabio Estevam, Jagan Teki, p.zabel,
Fabio Estevam, gstreamer-devel, linux-media,
Linux Kernel Mailing List
On Wed, Oct 24, 2018 at 9:17 AM Adam Ford <aford173@gmail.com> wrote:
>
> On Wed, Oct 24, 2018 at 9:08 AM jacopo mondi <jacopo@jmondi.org> wrote:
> >
> > Hi Adam,
> >
> > On Wed, Oct 24, 2018 at 08:53:41AM -0500, Adam Ford wrote:
> > > On Tue, Oct 23, 2018 at 6:03 PM jacopo mondi <jacopo@jmondi.org> wrote:
> > > >
> > > > Hi Adam,
> > > >
> > > > On Tue, Oct 23, 2018 at 12:54:12PM -0500, Adam Ford wrote:
> > > > > On Tue, Oct 23, 2018 at 12:39 PM Steve Longerbeam
> > > > > <steve_longerbeam@mentor.com> wrote:
> > > > > >
> > > > > >
> > > > > > On 10/23/18 10:34 AM, Adam Ford wrote:
> > > > > > > On Tue, Oct 23, 2018 at 11:36 AM Steve Longerbeam
> > > > > > > <steve_longerbeam@mentor.com> wrote:
> > > > > > >> Hi Adam,
> > > > > > >>
> > > > > > >> On 10/23/18 8:19 AM, Adam Ford wrote:
> > > > > > >>> On Mon, Oct 22, 2018 at 7:40 AM Fabio Estevam <festevam@gmail.com> wrote:
> > > > > > >>>> Hi Adam,
> > > > > > >>>>
> > > > > > >>>> On Mon, Oct 22, 2018 at 9:37 AM Adam Ford <aford173@gmail.com> wrote:
> > > > > > >>>>
> > > > > > >>>>> Thank you! This tutorial web site is exactly what I need. The
> > > > > > >>>>> documentation page in Linux touched on the media-ctl links, but it
> > > > > > >>>>> didn't explain the syntax or the mapping. This graphical
> > > > > > >>>>> interpretation really helps it make more sense.
> > > > > > >>>> Is capturing working well on your i.MX6 board now?
> > > > > > >>> Fabio,
> > > > > > >>>
> > > > > > >>> Unfortunately, no. I built the rootfs based on Jagan's instructions
> > > > > > >>> at https://openedev.amarulasolutions.com/display/ODWIKI/i.CoreM6+1.5
> > > > > > >>>
> > > > > > >>> I tried building both the 4.15-RC6 kernel, a 4.19 kernel and a 4.14 LTS kernel.
> > > > > > >>>
> > > > > > >>> Using the suggested method of generating the graphical display of the
> > > > > > >>> pipeline options, I am able to enable various pipeline options
> > > > > > >>> connecting different /dev/videoX options tot he camera. I have tried
> > > > > > >>> both the suggested method above as well as the instructions found in
> > > > > > >>> Documentation/media/v4l-drivers/imx.rst for their respective kernels,
> > > > > > >>> and I have tried multiple options to capture through
> > > > > > >>> ipu1_csi1_capture, ipu2_csi1_capture, and ip1_ic_prepenc capture, and
> > > > > > >>> all yield a broken pipe.
> > > > > > >>>
> > > > > > >>> libv4l2: error turning on stream: Broken pipe
> > > > > > >>> ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Could
> > > > > > >>> not read from resource.
> > > > > > >>> Additional debug info:
> > > > > > >>> gstv4l2bufferpool.c(1064): gst_v4l2_buffer_pool_poll ():
> > > > > > >>> /GstPipeline:pipeline0/GstV4l2Src:v4l2src0:
> > > > > > >>> poll error 1: Broken pipe (32)
> > > > > > >>>
> > > > > > >>> I can hear the camera click when I start gstreamer and click again
> > > > > > >>> when it stops trying to stream.
> > > > > > >>>
> > > > > > >>> dmesg indicates a broken pipe as well..
> > > > > > >>>
> > > > > > >>> [ 2419.851502] ipu2_csi1: pipeline start failed with -32
> > > > > > >>>
> > > > > > >>> might you have any suggestions?
> > > > > > >>
> > > > > > >> This -EPIPE error might mean you have a mis-match of resolution, pixel
> > > > > > >> format, or field type between one of the source->sink pad links. You can
> > > > > > >> find out which pads have a mis-match by enabling dynamic debug in the
> > > > > > >> kernel function __media_pipeline_start.
> > > > > > > Following Jagan's suggestion, I tried to make sure all the resolution
> > > > > > > and pixel formats were set the same between each source and sink.
> > > > > > >
> > > > > > > media-ctl --set-v4l2 "'ov5640 2-0010':0[fmt:UYVY2X8/640x480
> > > > > > > field:none]"
> > > > > > > media-ctl --set-v4l2 "'imx6-mipi-csi2':1[fmt:UYVY2X8/640x480
> > > > > > > field:none]"
> > > > > > > media-ctl --set-v4l2 "'ipu1_csi0_mux':2[fmt:UYVY2X8/640x480
> > > > > > > field:none]"
> > > > > > > media-ctl --set-v4l2 "'ipu1_csi0':2[fmt:AYUV32/640x480 field:none]"
> > > > > > >
> > > > > > >> Also make sure you are attempting to stream from the correct /dev/videoN.
> > > > > > > I have graphically plotted the pipeline using media-ctl --print-dot
> > > > > > > and I can see the proper video is routed, but your dynamic debug
> > > > > > > suggestion yielded something:
> > > > > > >
> > > > > > > imx-media capture-subsystem: link validation failed for 'ov5640
> > > > > > > 2-0010':0 -> 'imx6-mipi-csi2':0, error -32
> > > > > >
> > > > > >
> > > > > > It's what I expected, you have a format mismatch between those pads.
> > > > >
> > > > > Is the mismatch something I am doing wrong with:
> > > > >
> > > > > media-ctl --set-v4l2 "'ov5640 2-0010':0[fmt:UYVY2X8/640x480 field:none]"
> > > > > media-ctl --set-v4l2 "'imx6-mipi-csi2':2[fmt:UYVY2X8/640x480 field:none]"
> > > > >
> > > >
> > > > Could you try to verify the actual format configured on the sensor?
> > > > (media-ctl --get-v4l2 "'ov5640 2-0010':0").
> > > >
> > > > Depending on the driver version you are running, you might be affected
> > > > by different regressions.
> > > >
> > > > > or is there something else I need to do? I just used Jagan's suggestion.
> > > >
> > > > I suggest you to update the driver version to the last one available
> > > > in the media-tree master, or at least try to backport the following
> > > > commit:
> > > > fb98e29 media: ov5640: fix mode change regression
> > > >
> > > > If it turns out the format and mode configured on the sensor do not
> > > > match the one you want.
> > > >
> > > > Thanks
> > >
> > > That got me past one hurdle. Wtih your help, I was able to confirm
> > > the mis-match of the modes between the sensor and the csi1 source. I
> > > applied the patch as you suggested, but now I get a new error.
> > >
> > > [ 295.294370] imx6-mipi-csi2: LP-11 timeout, phy_state = 0x00000230
> > > [ 295.300681] ipu1_csi0: pipeline start failed with -110
> > >
> > >
> >
> > Here you go:
> > bad1774 media: ov5640: Fix timings setup code
> > aa4bb8b media: ov5640: Re-work MIPI startup sequence
> >
> > Please update your ov5640 driver to the last version available on
> > linux-media master repository. There have been a looot of developments
> > and fixes recently (and I would be happy to know if they have helped
> > you)
> >
> > > I am going to go through various patches to the imx framework and
> > > ov5640 driver to see if I can find the solution, but if you have
> > > suggestions as to which fixes are appropriate, I'll test those. If I
> >
> > Just get what's on linux-media master tree.
> >
> > > can get this working, would it make sense for me to submit some
> > > requests with kernel-stable to backport some of these commits to 4.19
> > > and if applicable, 4.14 too?
> >
> > Sure it will (even if I'm not familiar with the procedure used to tag
> > patches to be applied to stable. I would just apply everything that's
> > on the latest media tree)
> >
> > Keep us posted!
>
> Thank you everyone for your help. I pulled the linux-media master and
> built it, and it works perfectly from what I can tell. I'll go through
> the patch list and see what's back-port-able to 4.19. I noticed that
> just copying the ov5640.c driver breaks the build on 4.19.0, so I'm
> going to focus on just patches labeled 'fix' on both the ov5640 for
> now.
>
> I appreciate everyone's help, and Iearned a lot about the v4l system
> in the process.
>
Does anyone know when the media branch get's merged into the mainline
kernel? I assume we're in the merge window with 4.19 just having been
released. Once these have been merged into the mainline, I'll go
through and start requesting they get pulled into 4.19 and/or 4.14
if/when appropriate.
adam
> adam
>
> > j
> > >
> > > adam
> > > > j
> > > >
> > > > > adam
> > > > > >
> > > > > > Steve
> > > > > >
> > > > > >
> > > > > > >
> > > > > > > I am assume this means the interface between the camera and the csi2
> > > > > > > isn't working. I am going to double check the power rails and the
> > > > > > > clocks. i can hear it click when activated and deactivated, so
> > > > > > > something is happening.
> > > > > > >
> > > > > > > adam
> > > > > > >
> > > > > > >> Steve
> > > > > > >>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
2018-10-28 18:57 ` Adam Ford
@ 2018-10-29 13:49 ` Fabio Estevam
2018-11-05 22:32 ` Adam Ford
0 siblings, 1 reply; 38+ messages in thread
From: Fabio Estevam @ 2018-10-29 13:49 UTC (permalink / raw)
To: Adam Ford
Cc: jacopo mondi, Steve Longerbeam, Jagan Teki, Philipp Zabel,
Fabio Estevam,
Discussion of the development of and with GStreamer, linux-media,
linux-kernel
Hi Adam,
On Sun, Oct 28, 2018 at 3:58 PM Adam Ford <aford173@gmail.com> wrote:
> Does anyone know when the media branch get's merged into the mainline
> kernel? I assume we're in the merge window with 4.19 just having been
> released. Once these have been merged into the mainline, I'll go
> through and start requesting they get pulled into 4.19 and/or 4.14
> if/when appropriate.
This should happen in 4.20-rc1, which will probably be out next Sunday.
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
2018-10-29 13:49 ` Fabio Estevam
@ 2018-11-05 22:32 ` Adam Ford
2018-11-06 8:27 ` jacopo mondi
0 siblings, 1 reply; 38+ messages in thread
From: Adam Ford @ 2018-11-05 22:32 UTC (permalink / raw)
To: Fabio Estevam
Cc: jacopo, steve_longerbeam, Jagan Teki, p.zabel, Fabio Estevam,
gstreamer-devel, linux-media, Linux Kernel Mailing List
On Mon, Oct 29, 2018 at 8:49 AM Fabio Estevam <festevam@gmail.com> wrote:
>
> Hi Adam,
>
> On Sun, Oct 28, 2018 at 3:58 PM Adam Ford <aford173@gmail.com> wrote:
>
> > Does anyone know when the media branch get's merged into the mainline
> > kernel? I assume we're in the merge window with 4.19 just having been
> > released. Once these have been merged into the mainline, I'll go
> > through and start requesting they get pulled into 4.19 and/or 4.14
> > if/when appropriate.
>
> This should happen in 4.20-rc1, which will probably be out next Sunday.
I sent an e-mail to stable with a list of a variety of patches for the
ov5640 to be applied to 4.19.y So far all looks pretty good, but I
think I found on minor bug:
If I attempt to change just the resolution, it doesn't take.
Initial read
media-ctl --get-v4l2 "'ov5640 2-0010':0"
[fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:srgb xfer:srgb
ycbcr:601 quantization:full-range]
Change resolution
# media-ctl --set-v4l2 "'ov5640 2-0010':0[fmt:UYVY2X8/720x480 field:none]"
Read it back
# media-ctl --get-v4l2 "'ov5640 2-0010':0"
[fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:srgb xfer:srgb
ycbcr:601 quantization:full-range]
However, if I change the resolution AND the format to something other
than UYVY2x8, the resolution changes. I can then change the format
back to UYVY and capture and stream video at 1080p and 720x480.
I can work around this, but I thought I'd mention it. I was trying to
figure out a patch to apply to the mailing list myself, but I wasn't
able to fix it quickly.
adam
adam
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
2018-11-05 22:32 ` Adam Ford
@ 2018-11-06 8:27 ` jacopo mondi
0 siblings, 0 replies; 38+ messages in thread
From: jacopo mondi @ 2018-11-06 8:27 UTC (permalink / raw)
To: Adam Ford
Cc: Fabio Estevam, steve_longerbeam, Jagan Teki, p.zabel,
Fabio Estevam, gstreamer-devel, linux-media,
Linux Kernel Mailing List
[-- Attachment #1: Type: text/plain, Size: 2474 bytes --]
Hi Adam,
On Mon, Nov 05, 2018 at 04:32:33PM -0600, Adam Ford wrote:
> On Mon, Oct 29, 2018 at 8:49 AM Fabio Estevam <festevam@gmail.com> wrote:
> >
> > Hi Adam,
> >
> > On Sun, Oct 28, 2018 at 3:58 PM Adam Ford <aford173@gmail.com> wrote:
> >
> > > Does anyone know when the media branch get's merged into the mainline
> > > kernel? I assume we're in the merge window with 4.19 just having been
> > > released. Once these have been merged into the mainline, I'll go
> > > through and start requesting they get pulled into 4.19 and/or 4.14
> > > if/when appropriate.
> >
> > This should happen in 4.20-rc1, which will probably be out next Sunday.
> I sent an e-mail to stable with a list of a variety of patches for the
> ov5640 to be applied to 4.19.y So far all looks pretty good, but I
> think I found on minor bug:
Thanks!
>
> If I attempt to change just the resolution, it doesn't take.
>
> Initial read
> media-ctl --get-v4l2 "'ov5640 2-0010':0"
> [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:srgb xfer:srgb
> ycbcr:601 quantization:full-range]
>
> Change resolution
> # media-ctl --set-v4l2 "'ov5640 2-0010':0[fmt:UYVY2X8/720x480 field:none]"
>
> Read it back
> # media-ctl --get-v4l2 "'ov5640 2-0010':0"
> [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:srgb xfer:srgb
> ycbcr:601 quantization:full-range]
>
> However, if I change the resolution AND the format to something other
> than UYVY2x8, the resolution changes. I can then change the format
> back to UYVY and capture and stream video at 1080p and 720x480.
> I can work around this, but I thought I'd mention it. I was trying to
> figure out a patch to apply to the mailing list myself, but I wasn't
> able to fix it quickly.
Thanks, you are right, this is a known issue :(
There have been patches to address this issue floating around the
mailing list, none of them has yet made it up to inclusion.
Sam has sent a patch to fix this:
https://patchwork.linuxtv.org/patch/52489/
Hugues had something similar I cannot find, if I'm not wrong, and I
carry myself the patch I posted in the patchwork discussion in my
trees.
Feel free to go through the media list and comment. One more report on
this would help to increase chances to have one of those patches
re-sent and then included.
Also, bug reports are always very welcome, but to maximize the chances
they receive the required attention, could you make a new email thread
next time and drop this one please?
Thanks
j
>
> adam
> adam
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 38+ messages in thread
end of thread, other threads:[~2018-11-06 8:27 UTC | newest]
Thread overview: 38+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-05-31 15:09 i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux Jagan Teki
2018-05-31 16:10 ` Nicolas Dufresne
2018-05-31 16:25 ` Jagan Teki
2018-05-31 19:06 ` Philipp Zabel
2018-06-01 5:19 ` Jagan Teki
2018-06-01 9:53 ` Sakari Ailus
2018-06-01 11:41 ` Jagan Teki
2018-06-29 21:46 ` Fabio Estevam
2018-07-03 18:41 ` jacopo mondi
2018-07-04 0:18 ` Fabio Estevam
2018-07-04 5:18 ` Jagan Teki
2018-07-04 6:57 ` Jagan Teki
2018-07-04 14:26 ` Fabio Estevam
[not found] ` <588A2275-4D45-442D-8B38-7A17C27BED10@gmail.com>
2018-07-04 6:59 ` Jagan Teki
2018-07-04 7:11 ` chain256
2018-09-20 14:56 ` jacopo mondi
2018-10-16 19:46 ` Adam Ford
2018-10-17 0:13 ` Steve Longerbeam
2018-10-17 8:01 ` jacopo mondi
2018-10-19 13:45 ` Adam Ford
2018-10-19 19:42 ` Adam Ford
2018-10-22 11:33 ` jacopo mondi
2018-10-22 12:25 ` Adam Ford
2018-10-22 12:40 ` Fabio Estevam
2018-10-23 15:19 ` Adam Ford
2018-10-23 16:36 ` Steve Longerbeam
2018-10-23 17:34 ` Adam Ford
2018-10-23 17:39 ` Steve Longerbeam
2018-10-23 17:54 ` Adam Ford
2018-10-23 18:11 ` Steve Longerbeam
2018-10-23 23:03 ` jacopo mondi
2018-10-24 13:53 ` Adam Ford
2018-10-24 14:08 ` jacopo mondi
2018-10-24 14:17 ` Adam Ford
2018-10-28 18:57 ` Adam Ford
2018-10-29 13:49 ` Fabio Estevam
2018-11-05 22:32 ` Adam Ford
2018-11-06 8:27 ` jacopo mondi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).