linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] m68k/mac: Refactor iop_preinit() and iop_init()
@ 2020-11-20  4:39 Finn Thain
  2020-11-20  7:56 ` Geert Uytterhoeven
  0 siblings, 1 reply; 2+ messages in thread
From: Finn Thain @ 2020-11-20  4:39 UTC (permalink / raw)
  To: Geert Uytterhoeven; +Cc: Joshua Thompson, linux-m68k, linux-kernel

The idea behind iop_preinit() was to put the SCC IOP into bypass mode.
However, that remains unimplemented and implementing it would be
difficult. Let the comments and code reflect this. Even if iop_preinit()
worked as described in the comments, it gets called immediately before
iop_init() so it might as well part of iop_init().

Cc: Joshua Thompson <funaho@jurai.org>
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
---
 arch/m68k/mac/config.c |  8 -------
 arch/m68k/mac/iop.c    | 54 ++++++++++++++----------------------------
 2 files changed, 18 insertions(+), 44 deletions(-)

diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index 2bea1799b8de..f66944909be9 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -55,7 +55,6 @@ struct mac_booter_data mac_bi_data;
 static unsigned long mac_orig_videoaddr;
 
 extern int mac_hwclk(int, struct rtc_time *);
-extern void iop_preinit(void);
 extern void iop_init(void);
 extern void via_init(void);
 extern void via_init_clock(irq_handler_t func);
@@ -836,13 +835,6 @@ static void __init mac_identify(void)
 		break;
 	}
 
-	/*
-	 * We need to pre-init the IOPs, if any. Otherwise
-	 * the serial console won't work if the user had
-	 * the serial ports set to "Faster" mode in MacOS.
-	 */
-	iop_preinit();
-
 	pr_info("Detected Macintosh model: %d\n", model);
 
 	/*
diff --git a/arch/m68k/mac/iop.c b/arch/m68k/mac/iop.c
index c669a7644301..de156a027f5b 100644
--- a/arch/m68k/mac/iop.c
+++ b/arch/m68k/mac/iop.c
@@ -47,6 +47,10 @@
  *
  * TODO:
  *
+ * o The SCC IOP has to be placed in bypass mode before the serial console
+ *   gets initialized. iop_init() would be one place to do that. Or the
+ *   bootloader could do that. For now, the Serial Switch control panel
+ *   is needed for that -- contrary to the changelog above.
  * o Something should be periodically checking iop_alive() to make sure the
  *   IOP hasn't died.
  * o Some of the IOP manager routines need better error checking and
@@ -224,40 +228,6 @@ static struct iop_msg *iop_get_unused_msg(void)
 	return NULL;
 }
 
-/*
- * This is called by the startup code before anything else. Its purpose
- * is to find and initialize the IOPs early in the boot sequence, so that
- * the serial IOP can be placed into bypass mode _before_ we try to
- * initialize the serial console.
- */
-
-void __init iop_preinit(void)
-{
-	if (macintosh_config->scc_type == MAC_SCC_IOP) {
-		if (macintosh_config->ident == MAC_MODEL_IIFX) {
-			iop_base[IOP_NUM_SCC] = (struct mac_iop *) SCC_IOP_BASE_IIFX;
-		} else {
-			iop_base[IOP_NUM_SCC] = (struct mac_iop *) SCC_IOP_BASE_QUADRA;
-		}
-		iop_scc_present = 1;
-	} else {
-		iop_base[IOP_NUM_SCC] = NULL;
-		iop_scc_present = 0;
-	}
-	if (macintosh_config->adb_type == MAC_ADB_IOP) {
-		if (macintosh_config->ident == MAC_MODEL_IIFX) {
-			iop_base[IOP_NUM_ISM] = (struct mac_iop *) ISM_IOP_BASE_IIFX;
-		} else {
-			iop_base[IOP_NUM_ISM] = (struct mac_iop *) ISM_IOP_BASE_QUADRA;
-		}
-		iop_stop(iop_base[IOP_NUM_ISM]);
-		iop_ism_present = 1;
-	} else {
-		iop_base[IOP_NUM_ISM] = NULL;
-		iop_ism_present = 0;
-	}
-}
-
 /*
  * Initialize the IOPs, if present.
  */
@@ -266,11 +236,23 @@ void __init iop_init(void)
 {
 	int i;
 
-	if (iop_scc_present) {
+	if (macintosh_config->scc_type == MAC_SCC_IOP) {
+		if (macintosh_config->ident == MAC_MODEL_IIFX)
+			iop_base[IOP_NUM_SCC] = (struct mac_iop *)SCC_IOP_BASE_IIFX;
+		else
+			iop_base[IOP_NUM_SCC] = (struct mac_iop *)SCC_IOP_BASE_QUADRA;
+		iop_scc_present = 1;
 		pr_debug("SCC IOP detected at %p\n", iop_base[IOP_NUM_SCC]);
 	}
-	if (iop_ism_present) {
+	if (macintosh_config->adb_type == MAC_ADB_IOP) {
+		if (macintosh_config->ident == MAC_MODEL_IIFX)
+			iop_base[IOP_NUM_ISM] = (struct mac_iop *)ISM_IOP_BASE_IIFX;
+		else
+			iop_base[IOP_NUM_ISM] = (struct mac_iop *)ISM_IOP_BASE_QUADRA;
+		iop_ism_present = 1;
 		pr_debug("ISM IOP detected at %p\n", iop_base[IOP_NUM_ISM]);
+
+		iop_stop(iop_base[IOP_NUM_ISM]);
 		iop_start(iop_base[IOP_NUM_ISM]);
 		iop_alive(iop_base[IOP_NUM_ISM]); /* clears the alive flag */
 	}
-- 
2.26.2


^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [PATCH] m68k/mac: Refactor iop_preinit() and iop_init()
  2020-11-20  4:39 [PATCH] m68k/mac: Refactor iop_preinit() and iop_init() Finn Thain
@ 2020-11-20  7:56 ` Geert Uytterhoeven
  0 siblings, 0 replies; 2+ messages in thread
From: Geert Uytterhoeven @ 2020-11-20  7:56 UTC (permalink / raw)
  To: Finn Thain; +Cc: Joshua Thompson, linux-m68k, Linux Kernel Mailing List

On Fri, Nov 20, 2020 at 5:51 AM Finn Thain <fthain@telegraphics.com.au> wrote:
> The idea behind iop_preinit() was to put the SCC IOP into bypass mode.
> However, that remains unimplemented and implementing it would be
> difficult. Let the comments and code reflect this. Even if iop_preinit()
> worked as described in the comments, it gets called immediately before
> iop_init() so it might as well part of iop_init().
>
> Cc: Joshua Thompson <funaho@jurai.org>
> Tested-by: Stan Johnson <userm57@yahoo.com>
> Signed-off-by: Finn Thain <fthain@telegraphics.com.au>

Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
i.e. will queue in the m68k for-v5.11 branch.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2020-11-20  7:56 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-11-20  4:39 [PATCH] m68k/mac: Refactor iop_preinit() and iop_init() Finn Thain
2020-11-20  7:56 ` Geert Uytterhoeven

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).