Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)

[Darrell Kavanagh <darrell.kavanagh@gmail.com>]

Thanks for the info, Hans. I was hoping there'd be something like
that. Compiling the whole kernel on this little machine will be
interesting, though...

On Wed, 1 Feb 2023 at 11:01, Hans de Goede <hdegoede@redhat.com> wrote:
>
> Hi,
>
> On 2/1/23 11:28, Jonathan Cameron wrote:
> > On Wed, 1 Feb 2023 01:40:49 +0000
> > Darrell Kavanagh <darrell.kavanagh@gmail.com> wrote:
> >
> >> Hello, all.
> >>
> >> I've finally reached a conclusion on this, after testing all the
> >> combinations of the patches (with and without reading the acpi
> >> mounting matrix), window managers (wayland, xorg) and the presence or
> >> not of my custom kernel parms.
> >>
> >> What works well is the full set of patches with the custom kernel
> >> parms and a new hwdb entry for the sensor:
> >>
> >> sensor:modalias:acpi:SMO8B30*:dmi:*:svnLENOVO*:pn82AT:*
> >>  ACCEL_MOUNT_MATRIX=0, 1, 0; -1, 0, 0; 0, 0, 1
> >>
> >> The autorotate then works correctly in wayland and xorg, but for xorg,
> >> the settings say the screen is "portrait left" when in actual fact it
> >> is in standard laptop landscape orientation. Wayland does not have
> >> this problem (I guess because wayland's view of the screen is straight
> >> from the kernel).
> >>
> >> Without the hwdb entry, the orientation is 90 degrees out without
> >> using the acpi matrix and 180 degrees out when using it. I could have
> >> gone either way here with appropriate hwdb entries, but my view is
> >> that we *should* be using the matrix.
> >
> > Added Hans de Goede as he has probably run into more of this mess
> > than anyone else.  Hans, any thoughts on if we are doing something
> > wrong on kernel side?  Or is the matrix just wrong *sigh*
>
> I see below that this laptop has a panel which is mounted 90 degrees
> rotated, that likely explains why the ACPI matrix does not work.
> So the best thing to do here is to just override it with a hwdb entries.
>
> IIRC there are already 1 or 2 other hwdb entries which actually
> override the ACPI provided matrix because of similar issues.
>
> Linux userspace expects the matrix in this case to be set so that
> it causes e.g. gnome's auto-rotation to put the image upright
> even with older gnome versions / mate / xfce which don't know about
> the panel being mounted 90 degrees.
>
> So e.g. "monitor-sensor" will report left-side-up or right-side-up
> while the device is actually in normal clamshell mode with the
> display up-right.
>
> This reporting of left-side-up or right-side-up is actually "correct"
> looking from the native LCD panel orientation and as mentioned is
> done for backward compatibility. This is documented here:
>
> https://github.com/systemd/systemd/blob/main/hwdb.d/60-sensor.hwdb#L54
>
> The way we are handling this is likely incompatible with how Windows
> handles this special case of 90° rotated screen + ROTM. Or the
> matrix in the ACPI tables could be just wrong...
>
> > I think 'ROTM' is defined by MS.
> > https://learn.microsoft.com/en-us/windows-hardware/drivers/sensors/sensors-acpi-entries
>
> Right and as such it would be good if we can still add support to
> it to the sensor driver in question. Because the ROTM info usually
> is correct and avoids the need for adding more and more hwdb entries.
>
> Note there already is existing support in some other sensor drivers.
>
> So we probably need to factor out some helper code for this and share
> that between sensor drivers.
>
>
> >> The only thing that concerns me is the need for custom kernel parms.
> >> It would be better if there was a way to avoid this, so that the user
> >> didn't have to mess around with their grub config. Though having said
> >> that, the sensors fix as we have it doesn't make things worse - under
> >> currently released kernels the screen always starts up sideways unless
> >> custom parms are added in grub.
>
> We actually have a quirk mechanism in the kernel for specifying
> the need for: video=DSI-1:panel_orientation=right_side_up  and this
> will also automatically fix the fbcon orientation, see:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/gpu/drm/drm_panel_orientation_quirks.c
>
> If you submit a patch for this upstream please Cc me.
>
> Regards,
>
> Hans
>
>
>
>
>
>
> >>> On Mon, 30 Jan 2023 at 20:17, Jonathan Cameron <jic23@kernel.org> wrote:
> >>>>
> >>>> On Mon, 30 Jan 2023 20:02:31 +0000
> >>>> Darrell Kavanagh <darrell.kavanagh@gmail.com> wrote:
> >>>>
> >>>>> Thanks. To be clear, before I changed the grub command line, the
> >>>>> system always booted up "sideways", even when the sensor was not being
> >>>>> detected. This was true for everything, not just Gnome, except grub
> >>>>> itself.
> >>>>>
> >>>>> I added:
> >>>>>
> >>>>> GRUB_CMDLINE_LINUX_DEFAULT="fbcon=rotate:1
> >>>>> video=DSI-1:panel_orientation=right_side_up quiet splash"
> >>>>>
> >>>>> This fixed the orientation for pre-splash boot messages, the splash
> >>>>> screen and the desktop environment. But not, for example (as I saw
> >>>>> after adding my own module signing key for testing your fixes), the
> >>>>> MOK validation screens.
> >>>>>
> >>>>> Does this make sense?
> >>>>>
> >>>>> Does what you are proposing act at a lower level than changing the
> >>>>> systemd hwdb orientation matrix?
> >>>>
> >>>> I'm not sure on the userspace side of things, but intent is that
> >>>> it will provide the orientation data to any users - though only after
> >>>> the kernel boots and software needs to be aware of it.  Give it a go,
> >>>> and if not Bastien (IIRC wrote iio-sensor-proxy) may be able to advise.
> >>>>
> >>>> For Bastien - patches for kernel side are:
> >>>> https://lore.kernel.org/linux-iio/20230130201018.981024-1-jic23@kernel.org/T/#t
> >>>>
> >>>> Darrell is going to test them after back porting to 6.1.
> >>>> With the first patch he gets the right result in gnome but we weren't
> >>>> picking up the rotation matrix at that point (ROTM in ACPI).
> >>>>
> >>>> Thanks,
> >>>>
> >>>> Jonathan
> >>>>
> >>>>>
> >>>>> Thanks,
> >>>>> Darrell
> >>>>>
> >>>>> On Mon, 30 Jan 2023 at 19:27, Jonathan Cameron <jic23@kernel.org> wrote:
> >>>>>>
> >>>>>> On Mon, 30 Jan 2023 18:32:02 +0000
> >>>>>> Darrell Kavanagh <darrell.kavanagh@gmail.com> wrote:
> >>>>>>
> >>>>>>> On Mon, 30 Jan 2023 at 17:35, Jonathan Cameron
> >>>>>>> <Jonathan.Cameron@huawei.com> wrote:
> >>>>>>>
> >>>>>>>> That certainly looks like suitable matrix.
> >>>>>>>>
> >>>>>>>> If we are lucky it matches the handling in bmc150-accel-core.c for an identically
> >>>>>>>> named method.  That is going to swap the x and y axis which is I'd have thought would
> >>>>>>>> be rather bad if what you have is currently working well.
> >>>>>>>>
> >>>>>>>
> >>>>>>> Actually, that would be good, because at present I have to rotate 90
> >>>>>>> degrees in my grub command line.
> >>>>>> :)
> >>>>>>
> >>>>>> I'll see if I can roll a suitable patch.
> >>>>>>
> >>>>>> Jonathan
> >>>>>>
> >>>>>>>
> >>>>>>> Darrell
> >>>>>>>
> >>>>>>>>>             }
> >>>>>>>>>
> >>>>>>>>>             Method (PRIM, 0, NotSerialized)
> >>>>>>>>>             {
> >>>>>>>>>                 Name (RBUF, Buffer (One)
> >>>>>>>>>                 {
> >>>>>>>>>                      0x01                                             // .
> >>>>>>>>>                 })
> >>>>>>>>>                 Return (RBUF) /* \_SB_.PCI0.I2C5.DEV_.PRIM.RBUF */
> >>>>>>>>>             }
> >>>>>>>>>
> >>>>>>>>>             Method (_STA, 0, NotSerialized)  // _STA: Status
> >>>>>>>>>             {
> >>>>>>>>>                 If ((GAVT == 0x6A))
> >>>>>>>>>                 {
> >>>>>>>>>                     Return (0x0F)
> >>>>>>>>>                 }
> >>>>>>>>>                 Else
> >>>>>>>>>                 {
> >>>>>>>>>                     Return (Zero)
> >>>>>>>>>                 }
> >>>>>>>>>             }
> >>>>>>>>>
> >>>>>>>>>             Method (CALS, 1, NotSerialized)
> >>>>>>>>>             {
> >>>>>>>>>                 Local0 = Arg0
> >>>>>>>>>                 If (((Local0 == Zero) || (Local0 == Ones)))
> >>>>>>>>>                 {
> >>>>>>>>>                     Local0 = BAC1 /* \BAC1 */
> >>>>>>>>>                     Return (Local0)
> >>>>>>>>>                 }
> >>>>>>>>>                 Else
> >>>>>>>>>                 {
> >>>>>>>>>                     BAC1 = Local0
> >>>>>>>>>                     BACS = Local0
> >>>>>>>>>                     BSCA (0xB0)
> >>>>>>>>>                 }
> >>>>>>>>>             }
> >>>>>>>>>         }
> >>>>>>>>>     }
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> Thanks,
> >>>>>>>>> Darrell
> >>>>>>>>>
> >>>>>>>>> On Mon, 30 Jan 2023 at 12:31, Jonathan Cameron
> >>>>>>>>> <Jonathan.Cameron@huawei.com> wrote:
> >>>>>>>>>>
> >>>>>>>>>> On Mon, 30 Jan 2023 03:37:23 +0000
> >>>>>>>>>> Darrell Kavanagh <darrell.kavanagh@gmail.com> wrote:
> >>>>>>>>>>
> >>>>>>>>>>> Forwarding because original html messages were rejected by the server...
> >>>>>>>>>>>
> >>>>>>>>>>> ---------- Forwarded message ---------
> >>>>>>>>>>> From: Darrell Kavanagh <darrell.kavanagh@gmail.com>
> >>>>>>>>>>> Date: Mon, 30 Jan 2023 at 02:52
> >>>>>>>>>>> Subject: Re: Bug#1029850: linux: Driver not loaded for ST
> >>>>>>>>>>> Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
> >>>>>>>>>>> To: Jonathan Cameron <jic23@kernel.org>
> >>>>>>>>>>> Cc: <lorenzo@kernel.org>, <lars@metafoo.de>,
> >>>>>>>>>>> <linux-iio@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
> >>>>>>>>>>> <carnil@debian.org>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> Hi Jonathan,
> >>>>>>>>>>>
> >>>>>>>>>>> Thank you. The driver has evolved quite a bit in 6.2 (I read somewhere
> >>>>>>>>>>> that 6.2 includes some i2c enhancements), but I adapted your changes
> >>>>>>>>>>> to fit my Debian 6.1 kernel and it works. Two IIO devices are created
> >>>>>>>>>>> in sysfs, iio-sensor-proxy.service starts up and automatic screen
> >>>>>>>>>>> rotation in Gnome just works.
> >>>>>>>>>>>
> >>>>>>>>>>> To get the modules to load on boot, I made a small change to your code
> >>>>>>>>>>> in st_lsm6dsx_i2c to add the acpi alias to modules.alias:
> >>>>>>>>>>>
> >>>>>>>>>>> adding a null element to st_lsm6dsx_i2c_acpi_match:
> >>>>>>>>>>>     static const struct acpi_device_id st_lsm6dsx_i2c_acpi_match[] = {
> >>>>>>>>>>>          { "SMO8B30", ST_LSM6DS3TRC_ID, },
> >>>>>>>>>>>          { },
> >>>>>>>>>>>     };
> >>>>>>>>>>> then:
> >>>>>>>>>>>    MODULE_DEVICE_TABLE(acpi, st_lsm6dsx_i2c_acpi_match);
> >>>>>>>>>>
> >>>>>>>>>> doh! That was indeed sloppy of me to miss even for an untested hack.
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> dmesg shows:
> >>>>>>>>>>>
> >>>>>>>>>>> [ 7366.120208] st_lsm6dsx_i2c i2c-SMO8B30:00: supply vdd not found,
> >>>>>>>>>>> using dummy regulator
> >>>>>>>>>>> [ 7366.120260] st_lsm6dsx_i2c i2c-SMO8B30:00: supply vddio not found,
> >>>>>>>>>>> using dummy regulator
> >>>>>>>>>>> [ 7366.650839] st_lsm6dsx_i2c i2c-SMO8B30:00: mounting matrix not
> >>>>>>>>>>> found: using identity...
> >>>>>>>>>>>
> >>>>>>>>>>> Is this a problem?
> >>>>>>>>>>
> >>>>>>>>>> Those are all fine. For regulators that's expected on ACPI and should
> >>>>>>>>>> be harmless as it's up to the firmware to manage power (in DT it may
> >>>>>>>>>> be up to the kernel).
> >>>>>>>>>> For the mounting matrix, there is often something in ACPI DSDT
> >>>>>>>>>> (non standard though).  Could you
> >>>>>>>>>> cat /sys/firmware/acpi/tables/DSDT > ~/dsdt
> >>>>>>>>>> then run through iasl from acpitools
> >>>>>>>>>> iasl -d ~/dsdt
> >>>>>>>>>> and find the bit related to this device.
> >>>>>>>>>>
> >>>>>>>>>> If you can then share that there may be a _DSM or similar in there that
> >>>>>>>>>> is effectively the mounting matrix.  If we are lucky it will look like
> >>>>>>>>>> some existing versions we have code to handle and can add that support
> >>>>>>>>>> as well.
> >>>>>>>>>>
> >>>>>>>>>> Either way - I'll spin a formal patch with your fixes above and we can
> >>>>>>>>>> get this upstream for future kernels.  Mounting matrix can follow
> >>>>>>>>>> later if needed.
> >>>>>>>>>>
> >>>>>>>>>> Thanks,
> >>>>>>>>>>
> >>>>>>>>>> Jonathan
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> Thanks again.
> >>>>>>>>>>>
> >>>>>>>>>>> Darrell
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> On Sun, 29 Jan 2023 at 18:10, Jonathan Cameron <jic23@kernel.org> wrote:
> >>>>>>>>>>>>
> >>>>>>>>>>>> On Sun, 29 Jan 2023 17:03:51 +0000
> >>>>>>>>>>>> Darrell Kavanagh <darrell.kavanagh@gmail.com> wrote:
> >>>>>>>>>>>>
> >>>>>>>>>>>>> Hi,
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> I raised this bug in Debian, and have been asked to raise it upstream and
> >>>>>>>>>>>>> was given your addresses to do so. Will this email be OK, or should I raise
> >>>>>>>>>>>>> it in a bug tracking system somewhere?
> >>>>>>>>>>>>
> >>>>>>>>>>>> Email is the right option.
> >>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Many thanks,
> >>>>>>>>>>>>> Darrell
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> ---------- Forwarded message ---------
> >>>>>>>>>>>>> From: Salvatore Bonaccorso <carnil@debian.org>
> >>>>>>>>>>>>> Date: Sat, 28 Jan 2023 at 20:33
> >>>>>>>>>>>>> Subject: Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics
> >>>>>>>>>>>>> LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
> >>>>>>>>>>>>> To: Darrell Kavanagh <darrell.kavanagh@gmail.com>, <1029850@bugs.debian.org>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Hi Darrell,
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> On Sat, Jan 28, 2023 at 08:13:16PM +0000, Darrell Kavanagh wrote:
> >>>>>>>>>>>>>> Package: src:linux
> >>>>>>>>>>>>>> Version: 6.1.4-1
> >>>>>>>>>>>>>> Severity: normal
> >>>>>>>>>>>>>> File: linux
> >>>>>>>>>>>>>> X-Debbugs-Cc: darrell.kavanagh@gmail.com
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> Dear Maintainer,
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> This is a convertable touchscreen tablet/laptop. The rotation sensor
> >>>>>>>>>>>>> device
> >>>>>>>>>>>>>> ST Microelectronics LSM6DS3TR-C does not work. It is detected via ACPI
> >>>>>>>>>>>>> and the
> >>>>>>>>>>>>>> sysfs trees are created at
> >>>>>>>>>>>>> devices/pci0000:00/0000:00:17.1/i2c_designware.3/i2c-4/i2c-SMO8B30:00
> >>>>>>>>>>>>>> and devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:3c/SMO8B30:00 with
> >>>>>>>>>>>>>> symlinks bus/acpi/devices/SMO8B30:00 and bus/i2c/devices/i2c-SMO8B30:00,
> >>>>>>>>>>>>> but
> >>>>>>>>>>>>>> no driver is loaded.
> >>>>>>>>>>>>
> >>>>>>>>>>>> At least this is using the ST PNP ID which is better than average
> >>>>>>>>>>>> (long story!)
> >>>>>>>>>>>>
> >>>>>>>>>>>> The driver in question (ultimately drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
> >>>>>>>>>>>> does not currently have an ACPI support.  It should be straight forwards
> >>>>>>>>>>>> to add though the driver first needs converting to use
> >>>>>>>>>>>> device_get_match_data() with appropriate fallback so that it will match on
> >>>>>>>>>>>> ACPI, OF or original spi_device_id tables
> >>>>>>>>>>>>
> >>>>>>>>>>>> Completely untested but something like the following
> >>>>>>>>>>>> (the offset in the enum is needed to allow us to tell if we got a result when
> >>>>>>>>>>>> calling device_get_match_data() as it returns NULL on failure IIRC)
> >>>>>>>>>>>>
> >>>>>>>>>>>> I'm not sure how sucessful the driver will be at finding any interrupts etc, but
> >>>>>>>>>>>> it may get you basic functionality.
> >>>>>>>>>>>>
> >>>>>>>>>>>> Good luck and others more familiar with the driver may well tell me what I forgot
> >>>>>>>>>>>> when hacking the below ;)
> >>>>>>>>>>>>
> >>>>>>>>>>>> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> >>>>>>>>>>>> index 499fcf8875b4..2617ce236ddc 100644
> >>>>>>>>>>>> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> >>>>>>>>>>>> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> >>>>>>>>>>>> @@ -39,7 +39,7 @@
> >>>>>>>>>>>>  #define ST_ISM330IS_DEV_NAME   "ism330is"
> >>>>>>>>>>>>
> >>>>>>>>>>>>  enum st_lsm6dsx_hw_id {
> >>>>>>>>>>>> -       ST_LSM6DS3_ID,
> >>>>>>>>>>>> +       ST_LSM6DS3_ID = 1,
> >>>>>>>>>>>>         ST_LSM6DS3H_ID,
> >>>>>>>>>>>>         ST_LSM6DSL_ID,
> >>>>>>>>>>>>         ST_LSM6DSM_ID,
> >>>>>>>>>>>> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
> >>>>>>>>>>>> index df5f60925260..ecfceb2fb3db 100644
> >>>>>>>>>>>> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
> >>>>>>>>>>>> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
> >>>>>>>>>>>> @@ -23,10 +23,15 @@ static const struct regmap_config st_lsm6dsx_i2c_regmap_config = {
> >>>>>>>>>>>>
> >>>>>>>>>>>>  static int st_lsm6dsx_i2c_probe(struct i2c_client *client)
> >>>>>>>>>>>>  {
> >>>>>>>>>>>> -       const struct i2c_device_id *id = i2c_client_get_device_id(client);
> >>>>>>>>>>>> -       int hw_id = id->driver_data;
> >>>>>>>>>>>> +       int hw_id;
> >>>>>>>>>>>>         struct regmap *regmap;
> >>>>>>>>>>>>
> >>>>>>>>>>>> +       hw_id = (kernel_ulong_t)device_get_match_data(&client->dev);
> >>>>>>>>>>>> +       if (!hw_id)
> >>>>>>>>>>>> +               hw_id = i2c_client_get_device_id(client)->driver_data;
> >>>>>>>>>>>> +       if (!hw_id)
> >>>>>>>>>>>> +               return -EINVAL;
> >>>>>>>>>>>> +
> >>>>>>>>>>>>         regmap = devm_regmap_init_i2c(client, &st_lsm6dsx_i2c_regmap_config);
> >>>>>>>>>>>>         if (IS_ERR(regmap)) {
> >>>>>>>>>>>>                 dev_err(&client->dev, "Failed to register i2c regmap %ld\n", PTR_ERR(regmap));
> >>>>>>>>>>>> @@ -129,6 +134,10 @@ static const struct of_device_id st_lsm6dsx_i2c_of_match[] = {
> >>>>>>>>>>>>  };
> >>>>>>>>>>>>  MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match);
> >>>>>>>>>>>>
> >>>>>>>>>>>> +static const struct acpi_device_id st_lsm6dsx_i2c_acpi_match[] = {
> >>>>>>>>>>>> +       { "SMO8B30", ST_LSM6DS3TRC_ID, },
> >>>>>>>>>>>> +};
> >>>>>>>>>>>> +
> >>>>>>>>>>>>  static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = {
> >>>>>>>>>>>>         { ST_LSM6DS3_DEV_NAME, ST_LSM6DS3_ID },
> >>>>>>>>>>>>         { ST_LSM6DS3H_DEV_NAME, ST_LSM6DS3H_ID },
> >>>>>>>>>>>> @@ -161,6 +170,7 @@ static struct i2c_driver st_lsm6dsx_driver = {
> >>>>>>>>>>>>                 .name = "st_lsm6dsx_i2c",
> >>>>>>>>>>>>                 .pm = pm_sleep_ptr(&st_lsm6dsx_pm_ops),
> >>>>>>>>>>>>                 .of_match_table = st_lsm6dsx_i2c_of_match,
> >>>>>>>>>>>> +               .acpi_match_table = st_lsm6dsx_i2c_acpi_match,
> >>>>>>>>>>>>         },
> >>>>>>>>>>>>         .probe_new = st_lsm6dsx_i2c_probe,
> >>>>>>>>>>>>         .id_table = st_lsm6dsx_i2c_id_table,
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> The device is identifying itself to the kernel with PNP id SMO8B30:
> >>>>>>>>>>>>>> physical_node:
> >>>>>>>>>>>>>>       modalias=acpi:SMO8B30:SMO8B30:
> >>>>>>>>>>>>>>       name=SMO8B30:00
> >>>>>>>>>>>>>>       uevent=MODALIAS=acpi:SMO8B30:SMO8B30:
> >>>>>>>>>>>>>>       waiting_for_supplier=0
> >>>>>>>>>>>>>> firmware_node:
> >>>>>>>>>>>>>>       hid=SMO8B30
> >>>>>>>>>>>>>>       modalias=acpi:SMO8B30:SMO8B30:
> >>>>>>>>>>>>>>       path=\_SB_.PCI0.I2C5.DEV_
> >>>>>>>>>>>>>>       status=15
> >>>>>>>>>>>>>>       uevent=MODALIAS=acpi:SMO8B30:SMO8B30:
> >>>>>>>>>>>>>>       uid=0
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> The kernel module for the appropriate driver (st_lsm6dsx_i2c) is not
> >>>>>>>>>>>>> loaded on boot.
> >>>>>>>>>>>>>> Modprobing it does not associate it with the device, as I would expect as
> >>>>>>>>>>>>>> the module does not provide an alias for the above acpi/pnp id.
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Can you report this issue upstream? Gues to reach out are according to
> >>>>>>>>>>>>> get_maintainers.pl script:
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Lorenzo Bianconi <lorenzo@kernel.org> (maintainer:ST LSM6DSx IMU IIO DRIVER)
> >>>>>>>>>>>>> Jonathan Cameron <jic23@kernel.org> (maintainer:IIO SUBSYSTEM AND DRIVERS)
> >>>>>>>>>>>>> Lars-Peter Clausen <lars@metafoo.de> (reviewer:IIO SUBSYSTEM AND DRIVERS)
> >>>>>>>>>>>>> linux-iio@vger.kernel.org (open list:ST LSM6DSx IMU IIO DRIVER)
> >>>>>>>>>>>>> linux-kernel@vger.kernel.org (open list)
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Please keep us in the loop.
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Regards,
> >>>>>>>>>>>>> Salvatore
> >>>>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>
> >>>>>>
> >>>>
> >
>