linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Baolin Wang <baolin.wang@linaro.org>
To: mathias.nyman@intel.com, Felipe Balbi <balbi@kernel.org>
Cc: Greg KH <gregkh@linuxfoundation.org>,
	Mark Brown <broonie@kernel.org>, USB <linux-usb@vger.kernel.org>,
	LKML <linux-kernel@vger.kernel.org>,
	Baolin Wang <baolin.wang@linaro.org>
Subject: Re: [PATCH v4 1/2] usb: host: plat: Enable xhci plat runtime PM
Date: Thu, 8 Dec 2016 15:04:57 +0800	[thread overview]
Message-ID: <CAMz4kuL8oT2ktaE1hARy7wc=t4BEaByDKqWhT2P6B73-Rj8SBA@mail.gmail.com> (raw)
In-Reply-To: <c73a231d4a976db35d4108b74fcf0d8491572f95.1479991143.git.baolin.wang@linaro.org>

Hi Mathias and Felipe,

On 28 November 2016 at 14:43, Baolin Wang <baolin.wang@linaro.org> wrote:
> Enable the xhci plat runtime PM for parent device to suspend/resume xhci.
> Also call pm_runtime_get_noresume() in probe() function in case the parent
> device doesn't call suspend/resume callback by runtime PM now.
>
> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
> ---
> Changes since v3:
>  - Fix kbuild error.
>
> Changes since v2:
>  - Add pm_runtime_get_noresume() in probe() function.
>  - Add pm_runtime_set_suspended()/pm_runtime_put_noidle() in remove() function.
>
> Changes since v1:
>  - No updates.
> ---
>  drivers/usb/host/xhci-plat.c |   41 ++++++++++++++++++++++++++++++++++++-----
>  1 file changed, 36 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
> index ed56bf9..5805c6a 100644
> --- a/drivers/usb/host/xhci-plat.c
> +++ b/drivers/usb/host/xhci-plat.c
> @@ -246,6 +246,10 @@ static int xhci_plat_probe(struct platform_device *pdev)
>         if (ret)
>                 goto dealloc_usb2_hcd;
>
> +       pm_runtime_get_noresume(&pdev->dev);
> +       pm_runtime_set_active(&pdev->dev);
> +       pm_runtime_enable(&pdev->dev);
> +
>         return 0;
>
>
> @@ -274,6 +278,10 @@ static int xhci_plat_remove(struct platform_device *dev)
>         struct xhci_hcd *xhci = hcd_to_xhci(hcd);
>         struct clk *clk = xhci->clk;
>
> +       pm_runtime_set_suspended(&dev->dev);
> +       pm_runtime_put_noidle(&dev->dev);
> +       pm_runtime_disable(&dev->dev);
> +
>         usb_remove_hcd(xhci->shared_hcd);
>         usb_phy_shutdown(hcd->usb_phy);
>
> @@ -311,14 +319,37 @@ static int xhci_plat_resume(struct device *dev)
>
>         return xhci_resume(xhci, 0);
>  }
> +#endif /* CONFIG_PM_SLEEP */
> +
> +#ifdef CONFIG_PM
> +static int xhci_plat_runtime_suspend(struct device *dev)
> +{
> +       struct usb_hcd  *hcd = dev_get_drvdata(dev);
> +       struct xhci_hcd *xhci = hcd_to_xhci(hcd);
> +
> +       return xhci_suspend(xhci, device_may_wakeup(dev));
> +}
> +
> +static int xhci_plat_runtime_resume(struct device *dev)
> +{
> +       struct usb_hcd  *hcd = dev_get_drvdata(dev);
> +       struct xhci_hcd *xhci = hcd_to_xhci(hcd);
> +
> +       return xhci_resume(xhci, 0);
> +}
> +
> +static int xhci_plat_runtime_idle(struct device *dev)
> +{
> +       return 0;
> +}
> +#endif /* CONFIG_PM */
>
>  static const struct dev_pm_ops xhci_plat_pm_ops = {
>         SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume)
> +
> +       SET_RUNTIME_PM_OPS(xhci_plat_runtime_suspend, xhci_plat_runtime_resume,
> +                          xhci_plat_runtime_idle)
>  };
> -#define DEV_PM_OPS     (&xhci_plat_pm_ops)
> -#else
> -#define DEV_PM_OPS     NULL
> -#endif /* CONFIG_PM */
>
>  static const struct acpi_device_id usb_xhci_acpi_match[] = {
>         /* XHCI-compliant USB Controller */
> @@ -332,7 +363,7 @@ static int xhci_plat_resume(struct device *dev)
>         .remove = xhci_plat_remove,
>         .driver = {
>                 .name = "xhci-hcd",
> -               .pm = DEV_PM_OPS,
> +               .pm = &xhci_plat_pm_ops,
>                 .of_match_table = of_match_ptr(usb_xhci_of_match),
>                 .acpi_match_table = ACPI_PTR(usb_xhci_acpi_match),
>         },
> --
> 1.7.9.5
>

Do you have any comments about this patch? Thanks.

-- 
Baolin.wang
Best Regards

      parent reply	other threads:[~2016-12-08  7:05 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-28  6:43 [PATCH v4 1/2] usb: host: plat: Enable xhci plat runtime PM Baolin Wang
2016-11-28  6:43 ` [PATCH v4 2/2] usb: dwc3: core: Support the dwc3 host suspend/resume Baolin Wang
2016-12-08  7:05   ` Baolin Wang
2016-12-08  9:40     ` Felipe Balbi
2016-12-08 10:20       ` Baolin Wang
2016-12-08 11:02         ` Felipe Balbi
2016-12-08 11:14           ` Baolin Wang
2016-12-08 17:52             ` Felipe Balbi
2016-12-09  3:23               ` Baolin Wang
2016-12-08  7:04 ` Baolin Wang [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAMz4kuL8oT2ktaE1hARy7wc=t4BEaByDKqWhT2P6B73-Rj8SBA@mail.gmail.com' \
    --to=baolin.wang@linaro.org \
    --cc=balbi@kernel.org \
    --cc=broonie@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mathias.nyman@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).