linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marco Elver <elver@google.com>
To: Daniel Axtens <dja@axtens.net>
Cc: LKML <linux-kernel@vger.kernel.org>,
	Linux Memory Management List <linux-mm@kvack.org>,
	kasan-dev <kasan-dev@googlegroups.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	Andrey Konovalov <andreyknvl@gmail.com>,
	linuxppc-dev@lists.ozlabs.org,
	Christophe Leroy <christophe.leroy@csgroup.eu>,
	aneesh.kumar@linux.ibm.com, Balbir Singh <bsingharora@gmail.com>,
	"Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Subject: Re: [PATCH v13 2/3] kasan: allow architectures to provide an outline readiness check
Date: Wed, 16 Jun 2021 10:56:11 +0200	[thread overview]
Message-ID: <CANpmjNP8U_Mg05F0qOKsC3g58e9+hsuYkTQg0ZqsY==B5uLNqw@mail.gmail.com> (raw)
In-Reply-To: <20210616080244.51236-3-dja@axtens.net>

On Wed, 16 Jun 2021 at 10:02, Daniel Axtens <dja@axtens.net> wrote:
> Allow architectures to define a kasan_arch_is_ready() hook that bails
> out of any function that's about to touch the shadow unless the arch
> says that it is ready for the memory to be accessed. This is fairly
> uninvasive and should have a negligible performance penalty.
>
> This will only work in outline mode, so an arch must specify
> ARCH_DISABLE_KASAN_INLINE if it requires this.
>
> Cc: Balbir Singh <bsingharora@gmail.com>
> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
> Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
> Signed-off-by: Daniel Axtens <dja@axtens.net>

Reviewed-by: Marco Elver <elver@google.com>

but also check if an assertion that this is only used with
KASAN_GENERIC might make sense (below). Depends on how much we want to
make sure kasan_arch_is_ready() could be useful for other modes (which
I don't think it makes sense).

> --
>
> I discuss the justfication for this later in the series. Also,
> both previous RFCs for ppc64 - by 2 different people - have
> needed this trick! See:
>  - https://lore.kernel.org/patchwork/patch/592820/ # ppc64 hash series
>  - https://patchwork.ozlabs.org/patch/795211/      # ppc radix series
> ---
>  mm/kasan/common.c  | 4 ++++
>  mm/kasan/generic.c | 3 +++
>  mm/kasan/kasan.h   | 4 ++++
>  mm/kasan/shadow.c  | 8 ++++++++
>  4 files changed, 19 insertions(+)
>
> diff --git a/mm/kasan/common.c b/mm/kasan/common.c
> index 10177cc26d06..0ad615f3801d 100644
> --- a/mm/kasan/common.c
> +++ b/mm/kasan/common.c
> @@ -331,6 +331,10 @@ static inline bool ____kasan_slab_free(struct kmem_cache *cache, void *object,
>         u8 tag;
>         void *tagged_object;
>
> +       /* Bail if the arch isn't ready */
> +       if (!kasan_arch_is_ready())
> +               return false;
> +
>         tag = get_tag(object);
>         tagged_object = object;
>         object = kasan_reset_tag(object);
> diff --git a/mm/kasan/generic.c b/mm/kasan/generic.c
> index 53cbf28859b5..c3f5ba7a294a 100644
> --- a/mm/kasan/generic.c
> +++ b/mm/kasan/generic.c
> @@ -163,6 +163,9 @@ static __always_inline bool check_region_inline(unsigned long addr,
>                                                 size_t size, bool write,
>                                                 unsigned long ret_ip)
>  {
> +       if (!kasan_arch_is_ready())
> +               return true;
> +
>         if (unlikely(size == 0))
>                 return true;
>
> diff --git a/mm/kasan/kasan.h b/mm/kasan/kasan.h
> index 8f450bc28045..19323a3d5975 100644
> --- a/mm/kasan/kasan.h
> +++ b/mm/kasan/kasan.h
> @@ -449,6 +449,10 @@ static inline void kasan_poison_last_granule(const void *address, size_t size) {
>
>  #endif /* CONFIG_KASAN_GENERIC */
>
> +#ifndef kasan_arch_is_ready
> +static inline bool kasan_arch_is_ready(void)   { return true; }
> +#endif
> +

I've been trying to think of a way to make it clear this is only for
KASAN_GENERIC mode, and not the others. An arch can always define this
function, but of course it might not be used. One way would be to add
an '#ifndef CONFIG_KASAN_GENERIC' in the #else case and #error if it's
not generic mode.

I think trying to make this do anything useful for SW_TAGS or HW_TAGS
modes does not make sense (at least right now).

>  /*
>   * Exported functions for interfaces called from assembly or from generated
>   * code. Declarations here to avoid warning about missing declarations.
> diff --git a/mm/kasan/shadow.c b/mm/kasan/shadow.c
> index 082ee5b6d9a1..3c7f7efe6f68 100644
> --- a/mm/kasan/shadow.c
> +++ b/mm/kasan/shadow.c
> @@ -73,6 +73,10 @@ void kasan_poison(const void *addr, size_t size, u8 value, bool init)
>  {
>         void *shadow_start, *shadow_end;
>
> +       /* Don't touch the shadow memory if arch isn't ready */
> +       if (!kasan_arch_is_ready())
> +               return;
> +
>         /*
>          * Perform shadow offset calculation based on untagged address, as
>          * some of the callers (e.g. kasan_poison_object_data) pass tagged
> @@ -99,6 +103,10 @@ EXPORT_SYMBOL(kasan_poison);
>  #ifdef CONFIG_KASAN_GENERIC
>  void kasan_poison_last_granule(const void *addr, size_t size)
>  {
> +       /* Don't touch the shadow memory if arch isn't ready */
> +       if (!kasan_arch_is_ready())
> +               return;
> +
>         if (size & KASAN_GRANULE_MASK) {
>                 u8 *shadow = (u8 *)kasan_mem_to_shadow(addr + size);
>                 *shadow = size & KASAN_GRANULE_MASK;
> --
> 2.30.2
>
> --
> You received this message because you are subscribed to the Google Groups "kasan-dev" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to kasan-dev+unsubscribe@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/kasan-dev/20210616080244.51236-3-dja%40axtens.net.

  reply	other threads:[~2021-06-16  8:56 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-16  8:02 [PATCH v13 0/3] KASAN core changes for ppc64 radix KASAN Daniel Axtens
2021-06-16  8:02 ` [PATCH v13 1/3] kasan: allow an architecture to disable inline instrumentation Daniel Axtens
2021-06-16  9:09   ` Marco Elver
2021-06-16  8:02 ` [PATCH v13 2/3] kasan: allow architectures to provide an outline readiness check Daniel Axtens
2021-06-16  8:56   ` Marco Elver [this message]
2021-06-16  8:02 ` [PATCH v13 3/3] kasan: define and use MAX_PTRS_PER_* for early shadow tables Daniel Axtens
2021-06-16  9:07   ` Marco Elver
2021-06-16 17:23     ` Christophe Leroy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CANpmjNP8U_Mg05F0qOKsC3g58e9+hsuYkTQg0ZqsY==B5uLNqw@mail.gmail.com' \
    --to=elver@google.com \
    --cc=akpm@linux-foundation.org \
    --cc=andreyknvl@gmail.com \
    --cc=aneesh.kumar@linux.ibm.com \
    --cc=aneesh.kumar@linux.vnet.ibm.com \
    --cc=bsingharora@gmail.com \
    --cc=christophe.leroy@csgroup.eu \
    --cc=dja@axtens.net \
    --cc=kasan-dev@googlegroups.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).