* Generic PHY "unload" crash
@ 2019-05-21 18:40 Alan Cooper
2019-05-21 19:15 ` Kishon Vijay Abraham I
0 siblings, 1 reply; 3+ messages in thread
From: Alan Cooper @ 2019-05-21 18:40 UTC (permalink / raw)
To: : Linux Kernel Mailing List, Kishon Vijay Abraham I
I'm seeing an issue on a system where I have a generic PHY that is
used by a USB XHCI driver. The XHCI driver does the phy_init() in
probe and the phy_exit() in remove. The problem happens when I use
sysfs to "unload" the PHY driver before doing an unload of the XHCI
driver. This is a result of the XHCI driver calling into the PHY
driver's phy_exit routine after it's been removed. It seems like this
issue will exist for other PHY provider/user pairs and I don't see an
easy solution. I was wondering if anyone had any suggestions on how to
solve this problem.
Al
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Generic PHY "unload" crash
2019-05-21 18:40 Generic PHY "unload" crash Alan Cooper
@ 2019-05-21 19:15 ` Kishon Vijay Abraham I
2019-05-22 14:03 ` Alan Cooper
0 siblings, 1 reply; 3+ messages in thread
From: Kishon Vijay Abraham I @ 2019-05-21 19:15 UTC (permalink / raw)
To: Alan Cooper, : Linux Kernel Mailing List
Hi Alan,
On 21/05/19 1:40 PM, Alan Cooper wrote:
> I'm seeing an issue on a system where I have a generic PHY that is
> used by a USB XHCI driver. The XHCI driver does the phy_init() in
> probe and the phy_exit() in remove. The problem happens when I use
> sysfs to "unload" the PHY driver before doing an unload of the XHCI
> driver. This is a result of the XHCI driver calling into the PHY
> driver's phy_exit routine after it's been removed. It seems like this
> issue will exist for other PHY provider/user pairs and I don't see an
> easy solution. I was wondering if anyone had any suggestions on how to
> solve this problem.
Can you share the crash dump please?
Thanks
Kishon
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Generic PHY "unload" crash
2019-05-21 19:15 ` Kishon Vijay Abraham I
@ 2019-05-22 14:03 ` Alan Cooper
0 siblings, 0 replies; 3+ messages in thread
From: Alan Cooper @ 2019-05-22 14:03 UTC (permalink / raw)
To: Kishon Vijay Abraham I; +Cc: : Linux Kernel Mailing List
Here the crash dump:
# echo >unbind 8b39000.xhci_v2
[168374.367560] xhci-brcm 8b39000.xhci_v2: remove, state 4
[168374.372914] usb usb2: USB disconnect, device number 1
[168374.379314] xhci-brcm 8b39000.xhci_v2: USB bus 2 deregistered
[168374.385771] xhci-brcm 8b39000.xhci_v2: remove, state 1
[168374.391170] usb usb1: USB disconnect, device number 1
[168374.396425] usb 1-1: USB disconnect, device number 2
[168374.416980] xhci-brcm 8b39000.xhci_v2: USB bus 1 deregistered
[168374.427437] Unable to handle kernel paging request at virtual
address d1265234
[168374.434916] pgd = cc887ac0
[168374.437843] [d1265234] *pgd=80000040007003, *pmd=4ca1a003, *pte=00000000
[168374.444872] Internal error: Oops: 207 [#1] SMP ARM
[168374.449824] Modules linked in:
[168374.453045] CPU: 0 PID: 1699 Comm: sh Not tainted 4.9.135-1.12pre #2
[168374.459544] Hardware name: Broadcom STB (Flattened Device Tree)
[168374.465614] task: cc9361c0 task.stack: cb3b0000
[168374.470306] PC is at usb_uninit_xhci+0x40/0x8c
[168374.474960] LR is at brcm_usb_phy_exit+0x110/0x130
[168374.479933] pc : [<c05ab870>] lr : [<c05aa608>] psr: 200e0113
[168374.479933] sp : cb3b1d78 ip : cb3b1d90 fp : cb3b1d8c
[168374.491698] r10: cc831d0c r9 : cb218a80 r8 : cb3b1f68
[168374.497096] r7 : cc960990 r6 : cc960800 r5 : cd34f38c r4 : cd34f310
[168374.503811] r3 : d1265200 r2 : c0c2dfa0 r1 : 00400000 r0 : cd34f310
[168374.510523] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM
Segment user
[168374.517901] Control: 30c5383d Table: 4c887ac0 DAC: fffffffd
[168374.523899] Process sh (pid: 1699, stack limit = 0xcb3b0210)
[168374.529718] Stack: (0xcb3b1d78 to 0xcb3b2000)
[168374.534216] 1d60:
cd34f310 cd34f38c
[168374.542578] 1d80: cb3b1dac cb3b1d90 c05aa608 c05ab83c c05aa4f8
00000000 cc960800 cc960990
[168374.550937] 1da0: cb3b1dcc cb3b1db0 c05a9104 c05aa504 cb12b000
cb12b000 00000010 c1a76a0c
[168374.559346] 1dc0: cb3b1de4 cb3b1dd0 c07da9c0 c05a906c cd368410
cd368410 cb3b1dfc cb3b1de8
[168374.567717] 1de0: c068a4b0 c07da980 cd368410 c1a76a0c cb3b1e14
cb3b1e00 c0687a6c c068a488
[168374.576082] 1e00: cd368444 cd368410 cb3b1e2c cb3b1e18 c0687b34
c06879e0 c1a69a38 cd368410
[168374.584443] 1e20: cb3b1e4c cb3b1e30 c06866f4 c0687b14 c068666c
cc831d00 00000000 00000000
[168374.592804] 1e40: cb3b1e64 cb3b1e50 c0685874 c0686678 c0685844
cc831d00 cb3b1e7c cb3b1e68
[168374.601223] 1e60: c03d1eec c0685850 00000010 cc831d00 cb3b1eb4
cb3b1e80 c03d165c c03d1ea8
[168374.609596] 1e80: 00000000 00000000 c036f488 c1a03088 c16ab240
c03d1580 cb3b1f68 00000000
[168374.618018] 1ea0: 000df2a0 00000010 cb3b1f34 cb3b1eb8 c035d9f4
c03d158c 00000000 00000052
[168374.626426] 1ec0: 00000000 00000000 00000000 00040987 0000000a
cd2efe00 cc887780 0000000a
[168374.634850] 1ee0: 00000400 c037f90c cb3b1f24 cb3b1ef8 c037ef4c
00040987 00000000 00000000
[168374.643217] 1f00: cb263a80 00040987 00000000 00000010 c16ab240
000df2a0 cb3b1f68 00000000
[168374.651577] 1f20: 000df2a0 00000010 cb3b1f64 cb3b1f38 c035e8e4
c035d9b8 c16ab240 c037f44c
[168374.659929] 1f40: c1a03088 c16ab240 00000000 00000000 c16ab240
000df2a0 cb3b1fa4 cb3b1f68
[168374.668274] 1f60: c035f804 c035e83c 00000000 00000000 c037f2d4
00040987 000e0a48 00000010
[168374.676618] 1f80: 000df2a0 b6eddd60 00000004 c02092a4 cb3b0000
00000004 00000000 cb3b1fa8
[168374.684961] 1fa0: c0209100 c035f7b4 00000010 000df2a0 00000001
000df2a0 00000010 00000000
[168374.693303] 1fc0: 00000010 000df2a0 b6eddd60 00000004 000df2a0
00000010 000b8228 000b57d8
[168374.701646] 1fe0: 00000000 befc5a1c b6e40bab b6e7d2c6 00070030
00000001 00000000 00000000
[168374.710015] [<c05ab870>] (usb_uninit_xhci) from [<c05aa608>]
(brcm_usb_phy_exit+0x110/0x130)
[168374.718628] [<c05aa608>] (brcm_usb_phy_exit) from [<c05a9104>]
(phy_exit+0xa4/0xc8)
[168374.726458] [<c05a9104>] (phy_exit) from [<c07da9c0>]
(xhci_brcm_remove+0x4c/0x70)
[168374.734202] [<c07da9c0>] (xhci_brcm_remove) from [<c068a4b0>]
(platform_drv_remove+0x34/0x4c)
[168374.742904] [<c068a4b0>] (platform_drv_remove) from [<c0687a6c>]
(__device_release_driver+0x98/0x134)
[168374.752298] [<c0687a6c>] (__device_release_driver) from
[<c0687b34>] (device_release_driver+0x2c/0x38)
[168374.761778] [<c0687b34>] (device_release_driver) from [<c06866f4>]
(unbind_store+0x88/0x108)
[168374.770385] [<c06866f4>] (unbind_store) from [<c0685874>]
(drv_attr_store+0x30/0x3c)
[168374.778303] [<c0685874>] (drv_attr_store) from [<c03d1eec>]
(sysfs_kf_write+0x50/0x54)
[168374.786396] [<c03d1eec>] (sysfs_kf_write) from [<c03d165c>]
(kernfs_fop_write+0xdc/0x1b8)
[168374.794746] [<c03d165c>] (kernfs_fop_write) from [<c035d9f4>]
(__vfs_write+0x48/0x140)
[168374.802832] [<c035d9f4>] (__vfs_write) from [<c035e8e4>]
(vfs_write+0xb4/0x178)
[168374.810306] [<c035e8e4>] (vfs_write) from [<c035f804>] (SyS_write+0x5c/0xbc)
[168374.817505] [<c035f804>] (SyS_write) from [<c0209100>]
(ret_fast_syscall+0x0/0x1c)
[168374.825242] Code: e5943000 e592101c e3510000 0a000006 (e5932034)
[168374.831584] ---[ end trace 91aec3f8a9835a40 ]---
Thanks
Al
On Tue, May 21, 2019 at 3:15 PM Kishon Vijay Abraham I <kishon@ti.com> wrote:
>
> Hi Alan,
>
> On 21/05/19 1:40 PM, Alan Cooper wrote:
> > I'm seeing an issue on a system where I have a generic PHY that is
> > used by a USB XHCI driver. The XHCI driver does the phy_init() in
> > probe and the phy_exit() in remove. The problem happens when I use
> > sysfs to "unload" the PHY driver before doing an unload of the XHCI
> > driver. This is a result of the XHCI driver calling into the PHY
> > driver's phy_exit routine after it's been removed. It seems like this
> > issue will exist for other PHY provider/user pairs and I don't see an
> > easy solution. I was wondering if anyone had any suggestions on how to
> > solve this problem.
>
> Can you share the crash dump please?
>
> Thanks
> Kishon
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-05-22 14:03 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-21 18:40 Generic PHY "unload" crash Alan Cooper
2019-05-21 19:15 ` Kishon Vijay Abraham I
2019-05-22 14:03 ` Alan Cooper
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).