linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v4 00/15] media: mtk-vcodec: support for MT8183 decoder
@ 2021-04-27 11:15 Alexandre Courbot
  2021-04-27 11:15 ` [PATCH v4 01/15] media: mtk-vcodec: vdec: move stateful ops into their own file Alexandre Courbot
                   ` (16 more replies)
  0 siblings, 17 replies; 35+ messages in thread
From: Alexandre Courbot @ 2021-04-27 11:15 UTC (permalink / raw)
  To: Tiffany Lin, Andrew-CT Chen, Rob Herring, Yunfei Dong
  Cc: Mauro Carvalho Chehab, Hans Verkuil, linux-media, linux-kernel,
	linux-mediatek, Alexandre Courbot

This series adds support for the stateless API into mtk-vcodec, by first
separating the stateful ops into their own source file, and introducing
a new set of ops suitable for stateless decoding. As such, support for
stateful decoders should remain completely unaffected.

This series has been tested with both MT8183 and MT8173. Decoding was
working for both chips, and in the case of MT8173 no regression has been
noticed.

Patches 1-9 add MT8183 support to the decoder using the stateless API.
MT8183 only support H.264 acceleration.

Patches 10-15 are follow-ups that further improve compliance for the
decoder and encoder, by fixing support for commands on both. Patch 11
also makes sure that supported H.264 profiles are exported on MT8173.

Changes since v3:
* Stop checking that controls are set for every request.
* Add V4L2_CID_STATELESS_H264_START_CODE control.
* Stop mapping OUTPUT buffers and getting the NAL type from them, use the
  nal_ref_idc field instead.
* Make V4L2_CID_MIN_BUFFERS_FOR_CAPTURE control stateful-only.
* Set vb2_buffer's field to V4L2_FIELD_NONE in buffer validation hook.

Changes since v2:
* Add follow-up patches fixing support for START/STOP commands for the
  encoder, and stateful decoder.

Alexandre Courbot (8):
  media: mtk-vcodec: vdec: handle firmware version field
  media: mtk-vcodec: support version 2 of decoder firmware ABI
  media: add Mediatek's MM21 format
  dt-bindings: media: document mediatek,mt8183-vcodec-dec
  media: mtk-vcodec: vdec: use helpers in VIDIOC_(TRY_)DECODER_CMD
  media: mtk-vcodec: vdec: clamp OUTPUT resolution to hardware limits
  media: mtk-vcodec: make flush buffer reusable by encoder
  media: mtk-vcodec: venc: support START and STOP commands

Hirokazu Honda (1):
  media: mtk-vcodec: vdec: Support H264 profile control

Hsin-Yi Wang (1):
  media: mtk-vcodec: venc: make sure buffer exists in list before
    removing

Yunfei Dong (5):
  media: mtk-vcodec: vdec: move stateful ops into their own file
  media: mtk-vcodec: vdec: support stateless API
  media: mtk-vcodec: vdec: support stateless H.264 decoding
  media: mtk-vcodec: vdec: add media device if using stateless api
  media: mtk-vcodec: enable MT8183 decoder

 .../bindings/media/mediatek-vcodec.txt        |   1 +
 .../media/v4l/pixfmt-reserved.rst             |   7 +
 drivers/media/platform/Kconfig                |   2 +
 drivers/media/platform/mtk-vcodec/Makefile    |   3 +
 .../platform/mtk-vcodec/mtk_vcodec_dec.c      | 818 +++---------------
 .../platform/mtk-vcodec/mtk_vcodec_dec.h      |  28 +-
 .../platform/mtk-vcodec/mtk_vcodec_dec_drv.c  |  66 +-
 .../mtk-vcodec/mtk_vcodec_dec_stateful.c      | 667 ++++++++++++++
 .../mtk-vcodec/mtk_vcodec_dec_stateless.c     | 370 ++++++++
 .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  58 +-
 .../platform/mtk-vcodec/mtk_vcodec_enc.c      | 135 ++-
 .../platform/mtk-vcodec/mtk_vcodec_enc_drv.c  |   4 +
 .../mtk-vcodec/vdec/vdec_h264_req_if.c        | 780 +++++++++++++++++
 .../media/platform/mtk-vcodec/vdec_drv_if.c   |   3 +
 .../media/platform/mtk-vcodec/vdec_drv_if.h   |   1 +
 .../media/platform/mtk-vcodec/vdec_ipi_msg.h  |  23 +-
 .../media/platform/mtk-vcodec/vdec_vpu_if.c   |  43 +-
 .../media/platform/mtk-vcodec/vdec_vpu_if.h   |   5 +
 drivers/media/v4l2-core/v4l2-ioctl.c          |   1 +
 include/uapi/linux/videodev2.h                |   1 +
 20 files changed, 2293 insertions(+), 723 deletions(-)
 create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateful.c
 create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c
 create mode 100644 drivers/media/platform/mtk-vcodec/vdec/vdec_h264_req_if.c

--
2.31.1.498.g6c1eba8ee3d-goog


^ permalink raw reply	[flat|nested] 35+ messages in thread

* [PATCH v4 01/15] media: mtk-vcodec: vdec: move stateful ops into their own file
  2021-04-27 11:15 [PATCH v4 00/15] media: mtk-vcodec: support for MT8183 decoder Alexandre Courbot
@ 2021-04-27 11:15 ` Alexandre Courbot
  2021-04-27 11:15 ` [PATCH v4 02/15] media: mtk-vcodec: vdec: handle firmware version field Alexandre Courbot
                   ` (15 subsequent siblings)
  16 siblings, 0 replies; 35+ messages in thread
From: Alexandre Courbot @ 2021-04-27 11:15 UTC (permalink / raw)
  To: Tiffany Lin, Andrew-CT Chen, Rob Herring, Yunfei Dong
  Cc: Mauro Carvalho Chehab, Hans Verkuil, linux-media, linux-kernel,
	linux-mediatek, Alexandre Courbot

From: Yunfei Dong <yunfei.dong@mediatek.com>

We are planning to add support for stateless decoders to this driver.
Part of the driver will be shared between stateful and stateless
codecs, but a few ops need to be specialized for both. Extract the
stateful part of the driver and move it into its own file, accessible
through ops that the common driver parts can call.

This patch only moves code around and introduces a set of abstractions ;
the behavior of the driver should not be changed in any way.

Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
[acourbot: refactor, cleanup and split]
Co-developed-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
---
 drivers/media/platform/mtk-vcodec/Makefile    |   1 +
 .../platform/mtk-vcodec/mtk_vcodec_dec.c      | 717 ++----------------
 .../platform/mtk-vcodec/mtk_vcodec_dec.h      |  17 +-
 .../platform/mtk-vcodec/mtk_vcodec_dec_drv.c  |  10 +-
 .../mtk-vcodec/mtk_vcodec_dec_stateful.c      | 654 ++++++++++++++++
 .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  41 +
 6 files changed, 776 insertions(+), 664 deletions(-)
 create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateful.c

diff --git a/drivers/media/platform/mtk-vcodec/Makefile b/drivers/media/platform/mtk-vcodec/Makefile
index 4618d43dbbc8..9c3cbb5b800e 100644
--- a/drivers/media/platform/mtk-vcodec/Makefile
+++ b/drivers/media/platform/mtk-vcodec/Makefile
@@ -11,6 +11,7 @@ mtk-vcodec-dec-y := vdec/vdec_h264_if.o \
 		vdec_drv_if.o \
 		vdec_vpu_if.o \
 		mtk_vcodec_dec.o \
+		mtk_vcodec_dec_stateful.o \
 		mtk_vcodec_dec_pm.o \
 
 mtk-vcodec-enc-y := venc/venc_vp8_if.o \
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
index 56d86e59421e..4ad2662a43b2 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
@@ -16,68 +16,17 @@
 #include "vdec_drv_if.h"
 #include "mtk_vcodec_dec_pm.h"
 
-#define OUT_FMT_IDX	0
-#define CAP_FMT_IDX	3
-
-#define MTK_VDEC_MIN_W	64U
-#define MTK_VDEC_MIN_H	64U
 #define DFT_CFG_WIDTH	MTK_VDEC_MIN_W
 #define DFT_CFG_HEIGHT	MTK_VDEC_MIN_H
 
-static const struct mtk_video_fmt mtk_video_formats[] = {
-	{
-		.fourcc = V4L2_PIX_FMT_H264,
-		.type = MTK_FMT_DEC,
-		.num_planes = 1,
-		.flags = V4L2_FMT_FLAG_DYN_RESOLUTION,
-	},
-	{
-		.fourcc = V4L2_PIX_FMT_VP8,
-		.type = MTK_FMT_DEC,
-		.num_planes = 1,
-		.flags = V4L2_FMT_FLAG_DYN_RESOLUTION,
-	},
-	{
-		.fourcc = V4L2_PIX_FMT_VP9,
-		.type = MTK_FMT_DEC,
-		.num_planes = 1,
-		.flags = V4L2_FMT_FLAG_DYN_RESOLUTION,
-	},
-	{
-		.fourcc = V4L2_PIX_FMT_MT21C,
-		.type = MTK_FMT_FRAME,
-		.num_planes = 2,
-	},
-};
-
-static const struct mtk_codec_framesizes mtk_vdec_framesizes[] = {
-	{
-		.fourcc	= V4L2_PIX_FMT_H264,
-		.stepwise = {  MTK_VDEC_MIN_W, MTK_VDEC_MAX_W, 16,
-				MTK_VDEC_MIN_H, MTK_VDEC_MAX_H, 16 },
-	},
-	{
-		.fourcc	= V4L2_PIX_FMT_VP8,
-		.stepwise = {  MTK_VDEC_MIN_W, MTK_VDEC_MAX_W, 16,
-				MTK_VDEC_MIN_H, MTK_VDEC_MAX_H, 16 },
-	},
-	{
-		.fourcc = V4L2_PIX_FMT_VP9,
-		.stepwise = {  MTK_VDEC_MIN_W, MTK_VDEC_MAX_W, 16,
-				MTK_VDEC_MIN_H, MTK_VDEC_MAX_H, 16 },
-	},
-};
-
-#define NUM_SUPPORTED_FRAMESIZE ARRAY_SIZE(mtk_vdec_framesizes)
-#define NUM_FORMATS ARRAY_SIZE(mtk_video_formats)
-
-static const struct mtk_video_fmt *mtk_vdec_find_format(struct v4l2_format *f)
+static const struct mtk_video_fmt *mtk_vdec_find_format(struct v4l2_format *f,
+				   const struct mtk_vcodec_dec_pdata *dec_pdata)
 {
 	const struct mtk_video_fmt *fmt;
 	unsigned int k;
 
-	for (k = 0; k < NUM_FORMATS; k++) {
-		fmt = &mtk_video_formats[k];
+	for (k = 0; k < dec_pdata->num_formats; k++) {
+		fmt = &dec_pdata->vdec_formats[k];
 		if (fmt->fourcc == f->fmt.pix_mp.pixelformat)
 			return fmt;
 	}
@@ -94,393 +43,6 @@ static struct mtk_q_data *mtk_vdec_get_q_data(struct mtk_vcodec_ctx *ctx,
 	return &ctx->q_data[MTK_Q_DATA_DST];
 }
 
-/*
- * This function tries to clean all display buffers, the buffers will return
- * in display order.
- * Note the buffers returned from codec driver may still be in driver's
- * reference list.
- */
-static struct vb2_buffer *get_display_buffer(struct mtk_vcodec_ctx *ctx)
-{
-	struct vdec_fb *disp_frame_buffer = NULL;
-	struct mtk_video_dec_buf *dstbuf;
-	struct vb2_v4l2_buffer *vb;
-
-	mtk_v4l2_debug(3, "[%d]", ctx->id);
-	if (vdec_if_get_param(ctx,
-			GET_PARAM_DISP_FRAME_BUFFER,
-			&disp_frame_buffer)) {
-		mtk_v4l2_err("[%d]Cannot get param : GET_PARAM_DISP_FRAME_BUFFER",
-			ctx->id);
-		return NULL;
-	}
-
-	if (disp_frame_buffer == NULL) {
-		mtk_v4l2_debug(3, "No display frame buffer");
-		return NULL;
-	}
-
-	dstbuf = container_of(disp_frame_buffer, struct mtk_video_dec_buf,
-				frame_buffer);
-	vb = &dstbuf->m2m_buf.vb;
-	mutex_lock(&ctx->lock);
-	if (dstbuf->used) {
-		vb2_set_plane_payload(&vb->vb2_buf, 0,
-				      ctx->picinfo.fb_sz[0]);
-		if (ctx->q_data[MTK_Q_DATA_DST].fmt->num_planes == 2)
-			vb2_set_plane_payload(&vb->vb2_buf, 1,
-					      ctx->picinfo.fb_sz[1]);
-
-		mtk_v4l2_debug(2,
-				"[%d]status=%x queue id=%d to done_list %d",
-				ctx->id, disp_frame_buffer->status,
-				vb->vb2_buf.index,
-				dstbuf->queued_in_vb2);
-
-		v4l2_m2m_buf_done(vb, VB2_BUF_STATE_DONE);
-		ctx->decoded_frame_cnt++;
-	}
-	mutex_unlock(&ctx->lock);
-	return &vb->vb2_buf;
-}
-
-/*
- * This function tries to clean all capture buffers that are not used as
- * reference buffers by codec driver any more
- * In this case, we need re-queue buffer to vb2 buffer if user space
- * already returns this buffer to v4l2 or this buffer is just the output of
- * previous sps/pps/resolution change decode, or do nothing if user
- * space still owns this buffer
- */
-static struct vb2_buffer *get_free_buffer(struct mtk_vcodec_ctx *ctx)
-{
-	struct mtk_video_dec_buf *dstbuf;
-	struct vdec_fb *free_frame_buffer = NULL;
-	struct vb2_v4l2_buffer *vb;
-
-	if (vdec_if_get_param(ctx,
-				GET_PARAM_FREE_FRAME_BUFFER,
-				&free_frame_buffer)) {
-		mtk_v4l2_err("[%d] Error!! Cannot get param", ctx->id);
-		return NULL;
-	}
-	if (free_frame_buffer == NULL) {
-		mtk_v4l2_debug(3, " No free frame buffer");
-		return NULL;
-	}
-
-	mtk_v4l2_debug(3, "[%d] tmp_frame_addr = 0x%p",
-			ctx->id, free_frame_buffer);
-
-	dstbuf = container_of(free_frame_buffer, struct mtk_video_dec_buf,
-				frame_buffer);
-	vb = &dstbuf->m2m_buf.vb;
-
-	mutex_lock(&ctx->lock);
-	if (dstbuf->used) {
-		if ((dstbuf->queued_in_vb2) &&
-		    (dstbuf->queued_in_v4l2) &&
-		    (free_frame_buffer->status == FB_ST_FREE)) {
-			/*
-			 * After decode sps/pps or non-display buffer, we don't
-			 * need to return capture buffer to user space, but
-			 * just re-queue this capture buffer to vb2 queue.
-			 * This reduce overheads that dq/q unused capture
-			 * buffer. In this case, queued_in_vb2 = true.
-			 */
-			mtk_v4l2_debug(2,
-				"[%d]status=%x queue id=%d to rdy_queue %d",
-				ctx->id, free_frame_buffer->status,
-				vb->vb2_buf.index,
-				dstbuf->queued_in_vb2);
-			v4l2_m2m_buf_queue(ctx->m2m_ctx, vb);
-		} else if (!dstbuf->queued_in_vb2 && dstbuf->queued_in_v4l2) {
-			/*
-			 * If buffer in v4l2 driver but not in vb2 queue yet,
-			 * and we get this buffer from free_list, it means
-			 * that codec driver do not use this buffer as
-			 * reference buffer anymore. We should q buffer to vb2
-			 * queue, so later work thread could get this buffer
-			 * for decode. In this case, queued_in_vb2 = false
-			 * means this buffer is not from previous decode
-			 * output.
-			 */
-			mtk_v4l2_debug(2,
-					"[%d]status=%x queue id=%d to rdy_queue",
-					ctx->id, free_frame_buffer->status,
-					vb->vb2_buf.index);
-			v4l2_m2m_buf_queue(ctx->m2m_ctx, vb);
-			dstbuf->queued_in_vb2 = true;
-		} else {
-			/*
-			 * Codec driver do not need to reference this capture
-			 * buffer and this buffer is not in v4l2 driver.
-			 * Then we don't need to do any thing, just add log when
-			 * we need to debug buffer flow.
-			 * When this buffer q from user space, it could
-			 * directly q to vb2 buffer
-			 */
-			mtk_v4l2_debug(3, "[%d]status=%x err queue id=%d %d %d",
-					ctx->id, free_frame_buffer->status,
-					vb->vb2_buf.index,
-					dstbuf->queued_in_vb2,
-					dstbuf->queued_in_v4l2);
-		}
-		dstbuf->used = false;
-	}
-	mutex_unlock(&ctx->lock);
-	return &vb->vb2_buf;
-}
-
-static void clean_display_buffer(struct mtk_vcodec_ctx *ctx)
-{
-	struct vb2_buffer *framptr;
-
-	do {
-		framptr = get_display_buffer(ctx);
-	} while (framptr);
-}
-
-static void clean_free_buffer(struct mtk_vcodec_ctx *ctx)
-{
-	struct vb2_buffer *framptr;
-
-	do {
-		framptr = get_free_buffer(ctx);
-	} while (framptr);
-}
-
-static void mtk_vdec_queue_res_chg_event(struct mtk_vcodec_ctx *ctx)
-{
-	static const struct v4l2_event ev_src_ch = {
-		.type = V4L2_EVENT_SOURCE_CHANGE,
-		.u.src_change.changes =
-		V4L2_EVENT_SRC_CH_RESOLUTION,
-	};
-
-	mtk_v4l2_debug(1, "[%d]", ctx->id);
-	v4l2_event_queue_fh(&ctx->fh, &ev_src_ch);
-}
-
-static void mtk_vdec_flush_decoder(struct mtk_vcodec_ctx *ctx)
-{
-	bool res_chg;
-	int ret = 0;
-
-	ret = vdec_if_decode(ctx, NULL, NULL, &res_chg);
-	if (ret)
-		mtk_v4l2_err("DecodeFinal failed, ret=%d", ret);
-
-	clean_display_buffer(ctx);
-	clean_free_buffer(ctx);
-}
-
-static void mtk_vdec_update_fmt(struct mtk_vcodec_ctx *ctx,
-				unsigned int pixelformat)
-{
-	const struct mtk_video_fmt *fmt;
-	struct mtk_q_data *dst_q_data;
-	unsigned int k;
-
-	dst_q_data = &ctx->q_data[MTK_Q_DATA_DST];
-	for (k = 0; k < NUM_FORMATS; k++) {
-		fmt = &mtk_video_formats[k];
-		if (fmt->fourcc == pixelformat) {
-			mtk_v4l2_debug(1, "Update cap fourcc(%d -> %d)",
-				dst_q_data->fmt->fourcc, pixelformat);
-			dst_q_data->fmt = fmt;
-			return;
-		}
-	}
-
-	mtk_v4l2_err("Cannot get fourcc(%d), using init value", pixelformat);
-}
-
-static int mtk_vdec_pic_info_update(struct mtk_vcodec_ctx *ctx)
-{
-	unsigned int dpbsize = 0;
-	int ret;
-
-	if (vdec_if_get_param(ctx,
-				GET_PARAM_PIC_INFO,
-				&ctx->last_decoded_picinfo)) {
-		mtk_v4l2_err("[%d]Error!! Cannot get param : GET_PARAM_PICTURE_INFO ERR",
-				ctx->id);
-		return -EINVAL;
-	}
-
-	if (ctx->last_decoded_picinfo.pic_w == 0 ||
-		ctx->last_decoded_picinfo.pic_h == 0 ||
-		ctx->last_decoded_picinfo.buf_w == 0 ||
-		ctx->last_decoded_picinfo.buf_h == 0) {
-		mtk_v4l2_err("Cannot get correct pic info");
-		return -EINVAL;
-	}
-
-	if (ctx->last_decoded_picinfo.cap_fourcc != ctx->picinfo.cap_fourcc &&
-		ctx->picinfo.cap_fourcc != 0)
-		mtk_vdec_update_fmt(ctx, ctx->picinfo.cap_fourcc);
-
-	if ((ctx->last_decoded_picinfo.pic_w == ctx->picinfo.pic_w) ||
-	    (ctx->last_decoded_picinfo.pic_h == ctx->picinfo.pic_h))
-		return 0;
-
-	mtk_v4l2_debug(1,
-			"[%d]-> new(%d,%d), old(%d,%d), real(%d,%d)",
-			ctx->id, ctx->last_decoded_picinfo.pic_w,
-			ctx->last_decoded_picinfo.pic_h,
-			ctx->picinfo.pic_w, ctx->picinfo.pic_h,
-			ctx->last_decoded_picinfo.buf_w,
-			ctx->last_decoded_picinfo.buf_h);
-
-	ret = vdec_if_get_param(ctx, GET_PARAM_DPB_SIZE, &dpbsize);
-	if (dpbsize == 0)
-		mtk_v4l2_err("Incorrect dpb size, ret=%d", ret);
-
-	ctx->dpb_size = dpbsize;
-
-	return ret;
-}
-
-static void mtk_vdec_worker(struct work_struct *work)
-{
-	struct mtk_vcodec_ctx *ctx = container_of(work, struct mtk_vcodec_ctx,
-				decode_work);
-	struct mtk_vcodec_dev *dev = ctx->dev;
-	struct vb2_v4l2_buffer *src_buf, *dst_buf;
-	struct mtk_vcodec_mem buf;
-	struct vdec_fb *pfb;
-	bool res_chg = false;
-	int ret;
-	struct mtk_video_dec_buf *dst_buf_info, *src_buf_info;
-
-	src_buf = v4l2_m2m_next_src_buf(ctx->m2m_ctx);
-	if (src_buf == NULL) {
-		v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx);
-		mtk_v4l2_debug(1, "[%d] src_buf empty!!", ctx->id);
-		return;
-	}
-
-	dst_buf = v4l2_m2m_next_dst_buf(ctx->m2m_ctx);
-	if (dst_buf == NULL) {
-		v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx);
-		mtk_v4l2_debug(1, "[%d] dst_buf empty!!", ctx->id);
-		return;
-	}
-
-	src_buf_info = container_of(src_buf, struct mtk_video_dec_buf,
-				    m2m_buf.vb);
-	dst_buf_info = container_of(dst_buf, struct mtk_video_dec_buf,
-				    m2m_buf.vb);
-
-	pfb = &dst_buf_info->frame_buffer;
-	pfb->base_y.va = vb2_plane_vaddr(&dst_buf->vb2_buf, 0);
-	pfb->base_y.dma_addr = vb2_dma_contig_plane_dma_addr(&dst_buf->vb2_buf, 0);
-	pfb->base_y.size = ctx->picinfo.fb_sz[0];
-
-	pfb->base_c.va = vb2_plane_vaddr(&dst_buf->vb2_buf, 1);
-	pfb->base_c.dma_addr = vb2_dma_contig_plane_dma_addr(&dst_buf->vb2_buf, 1);
-	pfb->base_c.size = ctx->picinfo.fb_sz[1];
-	pfb->status = 0;
-	mtk_v4l2_debug(3, "===>[%d] vdec_if_decode() ===>", ctx->id);
-
-	mtk_v4l2_debug(3,
-			"id=%d Framebuf  pfb=%p VA=%p Y_DMA=%pad C_DMA=%pad Size=%zx",
-			dst_buf->vb2_buf.index, pfb,
-			pfb->base_y.va, &pfb->base_y.dma_addr,
-			&pfb->base_c.dma_addr, pfb->base_y.size);
-
-	if (src_buf_info->lastframe) {
-		mtk_v4l2_debug(1, "Got empty flush input buffer.");
-		src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx);
-
-		/* update dst buf status */
-		dst_buf = v4l2_m2m_dst_buf_remove(ctx->m2m_ctx);
-		mutex_lock(&ctx->lock);
-		dst_buf_info->used = false;
-		mutex_unlock(&ctx->lock);
-
-		vdec_if_decode(ctx, NULL, NULL, &res_chg);
-		clean_display_buffer(ctx);
-		vb2_set_plane_payload(&dst_buf->vb2_buf, 0, 0);
-		if (ctx->q_data[MTK_Q_DATA_DST].fmt->num_planes == 2)
-			vb2_set_plane_payload(&dst_buf->vb2_buf, 1, 0);
-		dst_buf->flags |= V4L2_BUF_FLAG_LAST;
-		v4l2_m2m_buf_done(dst_buf, VB2_BUF_STATE_DONE);
-		clean_free_buffer(ctx);
-		v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx);
-		return;
-	}
-	buf.va = vb2_plane_vaddr(&src_buf->vb2_buf, 0);
-	buf.dma_addr = vb2_dma_contig_plane_dma_addr(&src_buf->vb2_buf, 0);
-	buf.size = (size_t)src_buf->vb2_buf.planes[0].bytesused;
-	if (!buf.va) {
-		v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx);
-		mtk_v4l2_err("[%d] id=%d src_addr is NULL!!",
-				ctx->id, src_buf->vb2_buf.index);
-		return;
-	}
-	mtk_v4l2_debug(3, "[%d] Bitstream VA=%p DMA=%pad Size=%zx vb=%p",
-			ctx->id, buf.va, &buf.dma_addr, buf.size, src_buf);
-	dst_buf->vb2_buf.timestamp = src_buf->vb2_buf.timestamp;
-	dst_buf->timecode = src_buf->timecode;
-	mutex_lock(&ctx->lock);
-	dst_buf_info->used = true;
-	mutex_unlock(&ctx->lock);
-	src_buf_info->used = true;
-
-	ret = vdec_if_decode(ctx, &buf, pfb, &res_chg);
-
-	if (ret) {
-		mtk_v4l2_err(
-			" <===[%d], src_buf[%d] sz=0x%zx pts=%llu dst_buf[%d] vdec_if_decode() ret=%d res_chg=%d===>",
-			ctx->id,
-			src_buf->vb2_buf.index,
-			buf.size,
-			src_buf->vb2_buf.timestamp,
-			dst_buf->vb2_buf.index,
-			ret, res_chg);
-		src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx);
-		if (ret == -EIO) {
-			mutex_lock(&ctx->lock);
-			src_buf_info->error = true;
-			mutex_unlock(&ctx->lock);
-		}
-		v4l2_m2m_buf_done(src_buf, VB2_BUF_STATE_ERROR);
-	} else if (!res_chg) {
-		/*
-		 * we only return src buffer with VB2_BUF_STATE_DONE
-		 * when decode success without resolution change
-		 */
-		src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx);
-		v4l2_m2m_buf_done(src_buf, VB2_BUF_STATE_DONE);
-	}
-
-	dst_buf = v4l2_m2m_dst_buf_remove(ctx->m2m_ctx);
-	clean_display_buffer(ctx);
-	clean_free_buffer(ctx);
-
-	if (!ret && res_chg) {
-		mtk_vdec_pic_info_update(ctx);
-		/*
-		 * On encountering a resolution change in the stream.
-		 * The driver must first process and decode all
-		 * remaining buffers from before the resolution change
-		 * point, so call flush decode here
-		 */
-		mtk_vdec_flush_decoder(ctx);
-		/*
-		 * After all buffers containing decoded frames from
-		 * before the resolution change point ready to be
-		 * dequeued on the CAPTURE queue, the driver sends a
-		 * V4L2_EVENT_SOURCE_CHANGE event for source change
-		 * type V4L2_EVENT_SRC_CH_RESOLUTION
-		 */
-		mtk_vdec_queue_res_chg_event(ctx);
-	}
-	v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx);
-}
-
 static int vidioc_try_decoder_cmd(struct file *file, void *priv,
 				struct v4l2_decoder_cmd *cmd)
 {
@@ -561,10 +123,12 @@ void mtk_vcodec_dec_set_default_params(struct mtk_vcodec_ctx *ctx)
 {
 	struct mtk_q_data *q_data;
 
+	ctx->dev->vdec_pdata->init_vdec_params(ctx);
+
 	ctx->m2m_ctx->q_lock = &ctx->dev->dev_mutex;
 	ctx->fh.m2m_ctx = ctx->m2m_ctx;
 	ctx->fh.ctrl_handler = &ctx->ctrl_hdl;
-	INIT_WORK(&ctx->decode_work, mtk_vdec_worker);
+	INIT_WORK(&ctx->decode_work, ctx->dev->vdec_pdata->worker);
 	ctx->colorspace = V4L2_COLORSPACE_REC709;
 	ctx->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
 	ctx->quantization = V4L2_QUANTIZATION_DEFAULT;
@@ -574,7 +138,7 @@ void mtk_vcodec_dec_set_default_params(struct mtk_vcodec_ctx *ctx)
 	memset(q_data, 0, sizeof(struct mtk_q_data));
 	q_data->visible_width = DFT_CFG_WIDTH;
 	q_data->visible_height = DFT_CFG_HEIGHT;
-	q_data->fmt = &mtk_video_formats[OUT_FMT_IDX];
+	q_data->fmt = ctx->dev->vdec_pdata->default_out_fmt;
 	q_data->field = V4L2_FIELD_NONE;
 
 	q_data->sizeimage[0] = DFT_CFG_WIDTH * DFT_CFG_HEIGHT;
@@ -586,7 +150,7 @@ void mtk_vcodec_dec_set_default_params(struct mtk_vcodec_ctx *ctx)
 	q_data->visible_height = DFT_CFG_HEIGHT;
 	q_data->coded_width = DFT_CFG_WIDTH;
 	q_data->coded_height = DFT_CFG_HEIGHT;
-	q_data->fmt = &mtk_video_formats[CAP_FMT_IDX];
+	q_data->fmt = ctx->dev->vdec_pdata->default_cap_fmt;
 	q_data->field = V4L2_FIELD_NONE;
 
 	v4l_bound_align_image(&q_data->coded_width,
@@ -722,11 +286,14 @@ static int vidioc_try_fmt_vid_cap_mplane(struct file *file, void *priv,
 				struct v4l2_format *f)
 {
 	const struct mtk_video_fmt *fmt;
+	struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv);
+	const struct mtk_vcodec_dec_pdata *dec_pdata = ctx->dev->vdec_pdata;
 
-	fmt = mtk_vdec_find_format(f);
+	fmt = mtk_vdec_find_format(f, dec_pdata);
 	if (!fmt) {
-		f->fmt.pix.pixelformat = mtk_video_formats[CAP_FMT_IDX].fourcc;
-		fmt = mtk_vdec_find_format(f);
+		f->fmt.pix.pixelformat =
+			ctx->q_data[MTK_Q_DATA_DST].fmt->fourcc;
+		fmt = mtk_vdec_find_format(f, dec_pdata);
 	}
 
 	return vidioc_try_fmt(f, fmt);
@@ -737,11 +304,14 @@ static int vidioc_try_fmt_vid_out_mplane(struct file *file, void *priv,
 {
 	struct v4l2_pix_format_mplane *pix_fmt_mp = &f->fmt.pix_mp;
 	const struct mtk_video_fmt *fmt;
+	struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv);
+	const struct mtk_vcodec_dec_pdata *dec_pdata = ctx->dev->vdec_pdata;
 
-	fmt = mtk_vdec_find_format(f);
+	fmt = mtk_vdec_find_format(f, dec_pdata);
 	if (!fmt) {
-		f->fmt.pix.pixelformat = mtk_video_formats[OUT_FMT_IDX].fourcc;
-		fmt = mtk_vdec_find_format(f);
+		f->fmt.pix.pixelformat =
+			ctx->q_data[MTK_Q_DATA_SRC].fmt->fourcc;
+		fmt = mtk_vdec_find_format(f, dec_pdata);
 	}
 
 	if (pix_fmt_mp->plane_fmt[0].sizeimage == 0) {
@@ -831,6 +401,7 @@ static int vidioc_vdec_s_fmt(struct file *file, void *priv,
 	struct mtk_q_data *q_data;
 	int ret = 0;
 	const struct mtk_video_fmt *fmt;
+	const struct mtk_vcodec_dec_pdata *dec_pdata = ctx->dev->vdec_pdata;
 
 	mtk_v4l2_debug(3, "[%d]", ctx->id);
 
@@ -859,16 +430,16 @@ static int vidioc_vdec_s_fmt(struct file *file, void *priv,
 		ret = -EBUSY;
 	}
 
-	fmt = mtk_vdec_find_format(f);
+	fmt = mtk_vdec_find_format(f, dec_pdata);
 	if (fmt == NULL) {
 		if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
 			f->fmt.pix.pixelformat =
-				mtk_video_formats[OUT_FMT_IDX].fourcc;
-			fmt = mtk_vdec_find_format(f);
+				dec_pdata->default_out_fmt->fourcc;
+			fmt = mtk_vdec_find_format(f, dec_pdata);
 		} else if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
 			f->fmt.pix.pixelformat =
-				mtk_video_formats[CAP_FMT_IDX].fourcc;
-			fmt = mtk_vdec_find_format(f);
+				dec_pdata->default_cap_fmt->fourcc;
+			fmt = mtk_vdec_find_format(f, dec_pdata);
 		}
 	}
 	if (fmt == NULL)
@@ -905,16 +476,17 @@ static int vidioc_enum_framesizes(struct file *file, void *priv,
 {
 	int i = 0;
 	struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv);
+	const struct mtk_vcodec_dec_pdata *dec_pdata = ctx->dev->vdec_pdata;
 
 	if (fsize->index != 0)
 		return -EINVAL;
 
-	for (i = 0; i < NUM_SUPPORTED_FRAMESIZE; ++i) {
-		if (fsize->pixel_format != mtk_vdec_framesizes[i].fourcc)
+	for (i = 0; i < dec_pdata->num_framesizes; ++i) {
+		if (fsize->pixel_format != dec_pdata->vdec_framesizes[i].fourcc)
 			continue;
 
 		fsize->type = V4L2_FRMSIZE_TYPE_STEPWISE;
-		fsize->stepwise = mtk_vdec_framesizes[i].stepwise;
+		fsize->stepwise = dec_pdata->vdec_framesizes[i].stepwise;
 		if (!(ctx->dev->dec_capability &
 				VCODEC_CAPABILITY_4K_DISABLED)) {
 			mtk_v4l2_debug(3, "4K is enabled");
@@ -937,16 +509,20 @@ static int vidioc_enum_framesizes(struct file *file, void *priv,
 	return -EINVAL;
 }
 
-static int vidioc_enum_fmt(struct v4l2_fmtdesc *f, bool output_queue)
+static int vidioc_enum_fmt(struct v4l2_fmtdesc *f, void *priv,
+				bool output_queue)
 {
+	struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv);
+	const struct mtk_vcodec_dec_pdata *dec_pdata = ctx->dev->vdec_pdata;
 	const struct mtk_video_fmt *fmt;
 	int i, j = 0;
 
-	for (i = 0; i < NUM_FORMATS; i++) {
-		if (output_queue && (mtk_video_formats[i].type != MTK_FMT_DEC))
+	for (i = 0; i < dec_pdata->num_formats; i++) {
+		if (output_queue &&
+			(dec_pdata->vdec_formats[i].type != MTK_FMT_DEC))
 			continue;
 		if (!output_queue &&
-			(mtk_video_formats[i].type != MTK_FMT_FRAME))
+			(dec_pdata->vdec_formats[i].type != MTK_FMT_FRAME))
 			continue;
 
 		if (j == f->index)
@@ -954,10 +530,10 @@ static int vidioc_enum_fmt(struct v4l2_fmtdesc *f, bool output_queue)
 		++j;
 	}
 
-	if (i == NUM_FORMATS)
+	if (i == dec_pdata->num_formats)
 		return -EINVAL;
 
-	fmt = &mtk_video_formats[i];
+	fmt = &dec_pdata->vdec_formats[i];
 	f->pixelformat = fmt->fourcc;
 	f->flags = fmt->flags;
 
@@ -967,13 +543,13 @@ static int vidioc_enum_fmt(struct v4l2_fmtdesc *f, bool output_queue)
 static int vidioc_vdec_enum_fmt_vid_cap(struct file *file, void *priv,
 					struct v4l2_fmtdesc *f)
 {
-	return vidioc_enum_fmt(f, false);
+	return vidioc_enum_fmt(f, priv, false);
 }
 
 static int vidioc_vdec_enum_fmt_vid_out(struct file *file, void *priv,
 					struct v4l2_fmtdesc *f)
 {
-	return vidioc_enum_fmt(f, true);
+	return vidioc_enum_fmt(f, priv, true);
 }
 
 static int vidioc_vdec_g_fmt(struct file *file, void *priv,
@@ -1064,7 +640,7 @@ static int vidioc_vdec_g_fmt(struct file *file, void *priv,
 	return 0;
 }
 
-static int vb2ops_vdec_queue_setup(struct vb2_queue *vq,
+int vb2ops_vdec_queue_setup(struct vb2_queue *vq,
 				unsigned int *nbuffers,
 				unsigned int *nplanes,
 				unsigned int sizes[],
@@ -1088,7 +664,7 @@ static int vb2ops_vdec_queue_setup(struct vb2_queue *vq,
 		}
 	} else {
 		if (vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
-			*nplanes = 2;
+			*nplanes = q_data->fmt->num_planes;
 		else
 			*nplanes = 1;
 
@@ -1104,7 +680,7 @@ static int vb2ops_vdec_queue_setup(struct vb2_queue *vq,
 	return 0;
 }
 
-static int vb2ops_vdec_buf_prepare(struct vb2_buffer *vb)
+int vb2ops_vdec_buf_prepare(struct vb2_buffer *vb)
 {
 	struct mtk_vcodec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
 	struct mtk_q_data *q_data;
@@ -1126,128 +702,7 @@ static int vb2ops_vdec_buf_prepare(struct vb2_buffer *vb)
 	return 0;
 }
 
-static void vb2ops_vdec_buf_queue(struct vb2_buffer *vb)
-{
-	struct vb2_v4l2_buffer *src_buf;
-	struct mtk_vcodec_mem src_mem;
-	bool res_chg = false;
-	int ret = 0;
-	unsigned int dpbsize = 1, i = 0;
-	struct mtk_vcodec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
-	struct vb2_v4l2_buffer *vb2_v4l2 = NULL;
-	struct mtk_video_dec_buf *buf = NULL;
-	struct mtk_q_data *dst_q_data;
-
-	mtk_v4l2_debug(3, "[%d] (%d) id=%d, vb=%p",
-			ctx->id, vb->vb2_queue->type,
-			vb->index, vb);
-	/*
-	 * check if this buffer is ready to be used after decode
-	 */
-	if (vb->vb2_queue->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
-		vb2_v4l2 = to_vb2_v4l2_buffer(vb);
-		buf = container_of(vb2_v4l2, struct mtk_video_dec_buf,
-				   m2m_buf.vb);
-		mutex_lock(&ctx->lock);
-		if (!buf->used) {
-			v4l2_m2m_buf_queue(ctx->m2m_ctx, vb2_v4l2);
-			buf->queued_in_vb2 = true;
-			buf->queued_in_v4l2 = true;
-		} else {
-			buf->queued_in_vb2 = false;
-			buf->queued_in_v4l2 = true;
-		}
-		mutex_unlock(&ctx->lock);
-		return;
-	}
-
-	v4l2_m2m_buf_queue(ctx->m2m_ctx, to_vb2_v4l2_buffer(vb));
-
-	if (ctx->state != MTK_STATE_INIT) {
-		mtk_v4l2_debug(3, "[%d] already init driver %d",
-				ctx->id, ctx->state);
-		return;
-	}
-
-	src_buf = v4l2_m2m_next_src_buf(ctx->m2m_ctx);
-	if (!src_buf) {
-		mtk_v4l2_err("No src buffer");
-		return;
-	}
-	buf = container_of(src_buf, struct mtk_video_dec_buf, m2m_buf.vb);
-	if (buf->lastframe) {
-		/* This shouldn't happen. Just in case. */
-		mtk_v4l2_err("Invalid flush buffer.");
-		v4l2_m2m_src_buf_remove(ctx->m2m_ctx);
-		return;
-	}
-
-	src_mem.va = vb2_plane_vaddr(&src_buf->vb2_buf, 0);
-	src_mem.dma_addr = vb2_dma_contig_plane_dma_addr(&src_buf->vb2_buf, 0);
-	src_mem.size = (size_t)src_buf->vb2_buf.planes[0].bytesused;
-	mtk_v4l2_debug(2,
-			"[%d] buf id=%d va=%p dma=%pad size=%zx",
-			ctx->id, src_buf->vb2_buf.index,
-			src_mem.va, &src_mem.dma_addr,
-			src_mem.size);
-
-	ret = vdec_if_decode(ctx, &src_mem, NULL, &res_chg);
-	if (ret || !res_chg) {
-		/*
-		 * fb == NULL means to parse SPS/PPS header or
-		 * resolution info in src_mem. Decode can fail
-		 * if there is no SPS header or picture info
-		 * in bs
-		 */
-
-		src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx);
-		if (ret == -EIO) {
-			mtk_v4l2_err("[%d] Unrecoverable error in vdec_if_decode.",
-					ctx->id);
-			ctx->state = MTK_STATE_ABORT;
-			v4l2_m2m_buf_done(src_buf, VB2_BUF_STATE_ERROR);
-		} else {
-			v4l2_m2m_buf_done(src_buf, VB2_BUF_STATE_DONE);
-		}
-		mtk_v4l2_debug(ret ? 0 : 1,
-			       "[%d] vdec_if_decode() src_buf=%d, size=%zu, fail=%d, res_chg=%d",
-			       ctx->id, src_buf->vb2_buf.index,
-			       src_mem.size, ret, res_chg);
-		return;
-	}
-
-	if (vdec_if_get_param(ctx, GET_PARAM_PIC_INFO, &ctx->picinfo)) {
-		mtk_v4l2_err("[%d]Error!! Cannot get param : GET_PARAM_PICTURE_INFO ERR",
-				ctx->id);
-		return;
-	}
-
-	ctx->last_decoded_picinfo = ctx->picinfo;
-	dst_q_data = &ctx->q_data[MTK_Q_DATA_DST];
-	for (i = 0; i < dst_q_data->fmt->num_planes; i++) {
-		dst_q_data->sizeimage[i] = ctx->picinfo.fb_sz[i];
-		dst_q_data->bytesperline[i] = ctx->picinfo.buf_w;
-	}
-
-	mtk_v4l2_debug(2, "[%d] vdec_if_init() OK wxh=%dx%d pic wxh=%dx%d sz[0]=0x%x sz[1]=0x%x",
-			ctx->id,
-			ctx->picinfo.buf_w, ctx->picinfo.buf_h,
-			ctx->picinfo.pic_w, ctx->picinfo.pic_h,
-			dst_q_data->sizeimage[0],
-			dst_q_data->sizeimage[1]);
-
-	ret = vdec_if_get_param(ctx, GET_PARAM_DPB_SIZE, &dpbsize);
-	if (dpbsize == 0)
-		mtk_v4l2_err("[%d] GET_PARAM_DPB_SIZE fail=%d", ctx->id, ret);
-
-	ctx->dpb_size = dpbsize;
-	ctx->state = MTK_STATE_HEADER;
-	mtk_v4l2_debug(1, "[%d] dpbsize=%d", ctx->id, ctx->dpb_size);
-
-	mtk_vdec_queue_res_chg_event(ctx);
-}
-
-static void vb2ops_vdec_buf_finish(struct vb2_buffer *vb)
+void vb2ops_vdec_buf_finish(struct vb2_buffer *vb)
 {
 	struct mtk_vcodec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
 	struct vb2_v4l2_buffer *vb2_v4l2;
@@ -1270,7 +725,7 @@ static void vb2ops_vdec_buf_finish(struct vb2_buffer *vb)
 	}
 }
 
-static int vb2ops_vdec_buf_init(struct vb2_buffer *vb)
+int vb2ops_vdec_buf_init(struct vb2_buffer *vb)
 {
 	struct vb2_v4l2_buffer *vb2_v4l2 = container_of(vb,
 					struct vb2_v4l2_buffer, vb2_buf);
@@ -1287,7 +742,7 @@ static int vb2ops_vdec_buf_init(struct vb2_buffer *vb)
 	return 0;
 }
 
-static int vb2ops_vdec_start_streaming(struct vb2_queue *q, unsigned int count)
+int vb2ops_vdec_start_streaming(struct vb2_queue *q, unsigned int count)
 {
 	struct mtk_vcodec_ctx *ctx = vb2_get_drv_priv(q);
 
@@ -1297,10 +752,11 @@ static int vb2ops_vdec_start_streaming(struct vb2_queue *q, unsigned int count)
 	return 0;
 }
 
-static void vb2ops_vdec_stop_streaming(struct vb2_queue *q)
+void vb2ops_vdec_stop_streaming(struct vb2_queue *q)
 {
 	struct vb2_v4l2_buffer *src_buf = NULL, *dst_buf = NULL;
 	struct mtk_vcodec_ctx *ctx = vb2_get_drv_priv(q);
+	int ret;
 
 	mtk_v4l2_debug(3, "[%d] (%d) state=(%x) ctx->decoded_frame_cnt=%d",
 			ctx->id, q->type, ctx->state, ctx->decoded_frame_cnt);
@@ -1334,7 +790,9 @@ static void vb2ops_vdec_stop_streaming(struct vb2_queue *q)
 				ctx->last_decoded_picinfo.buf_w,
 				ctx->last_decoded_picinfo.buf_h);
 
-		mtk_vdec_flush_decoder(ctx);
+		ret = ctx->dev->vdec_pdata->flush_decoder(ctx);
+		if (ret)
+			mtk_v4l2_err("DecodeFinal failed, ret=%d", ret);
 	}
 	ctx->state = MTK_STATE_FLUSH;
 
@@ -1381,75 +839,12 @@ static void m2mops_vdec_job_abort(void *priv)
 	ctx->state = MTK_STATE_ABORT;
 }
 
-static int mtk_vdec_g_v_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct mtk_vcodec_ctx *ctx = ctrl_to_ctx(ctrl);
-	int ret = 0;
-
-	switch (ctrl->id) {
-	case V4L2_CID_MIN_BUFFERS_FOR_CAPTURE:
-		if (ctx->state >= MTK_STATE_HEADER) {
-			ctrl->val = ctx->dpb_size;
-		} else {
-			mtk_v4l2_debug(0, "Seqinfo not ready");
-			ctrl->val = 0;
-		}
-		break;
-	default:
-		ret = -EINVAL;
-	}
-	return ret;
-}
-
-static const struct v4l2_ctrl_ops mtk_vcodec_dec_ctrl_ops = {
-	.g_volatile_ctrl = mtk_vdec_g_v_ctrl,
-};
-
-int mtk_vcodec_dec_ctrls_setup(struct mtk_vcodec_ctx *ctx)
-{
-	struct v4l2_ctrl *ctrl;
-
-	v4l2_ctrl_handler_init(&ctx->ctrl_hdl, 1);
-
-	ctrl = v4l2_ctrl_new_std(&ctx->ctrl_hdl,
-				&mtk_vcodec_dec_ctrl_ops,
-				V4L2_CID_MIN_BUFFERS_FOR_CAPTURE,
-				0, 32, 1, 1);
-	ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE;
-	v4l2_ctrl_new_std_menu(&ctx->ctrl_hdl,
-				&mtk_vcodec_dec_ctrl_ops,
-				V4L2_CID_MPEG_VIDEO_VP9_PROFILE,
-				V4L2_MPEG_VIDEO_VP9_PROFILE_0,
-				0, V4L2_MPEG_VIDEO_VP9_PROFILE_0);
-
-	if (ctx->ctrl_hdl.error) {
-		mtk_v4l2_err("Adding control failed %d",
-				ctx->ctrl_hdl.error);
-		return ctx->ctrl_hdl.error;
-	}
-
-	v4l2_ctrl_handler_setup(&ctx->ctrl_hdl);
-	return 0;
-}
-
 const struct v4l2_m2m_ops mtk_vdec_m2m_ops = {
 	.device_run	= m2mops_vdec_device_run,
 	.job_ready	= m2mops_vdec_job_ready,
 	.job_abort	= m2mops_vdec_job_abort,
 };
 
-static const struct vb2_ops mtk_vdec_vb2_ops = {
-	.queue_setup	= vb2ops_vdec_queue_setup,
-	.buf_prepare	= vb2ops_vdec_buf_prepare,
-	.buf_queue	= vb2ops_vdec_buf_queue,
-	.wait_prepare	= vb2_ops_wait_prepare,
-	.wait_finish	= vb2_ops_wait_finish,
-	.buf_init	= vb2ops_vdec_buf_init,
-	.buf_finish	= vb2ops_vdec_buf_finish,
-	.start_streaming	= vb2ops_vdec_start_streaming,
-	.stop_streaming	= vb2ops_vdec_stop_streaming,
-};
-
 const struct v4l2_ioctl_ops mtk_vdec_ioctl_ops = {
 	.vidioc_streamon	= v4l2_m2m_ioctl_streamon,
 	.vidioc_streamoff	= v4l2_m2m_ioctl_streamoff,
@@ -1496,7 +891,7 @@ int mtk_vcodec_dec_queue_init(void *priv, struct vb2_queue *src_vq,
 	src_vq->io_modes	= VB2_DMABUF | VB2_MMAP;
 	src_vq->drv_priv	= ctx;
 	src_vq->buf_struct_size = sizeof(struct mtk_video_dec_buf);
-	src_vq->ops		= &mtk_vdec_vb2_ops;
+	src_vq->ops		= ctx->dev->vdec_pdata->vdec_vb2_ops;
 	src_vq->mem_ops		= &vb2_dma_contig_memops;
 	src_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
 	src_vq->lock		= &ctx->dev->dev_mutex;
@@ -1511,7 +906,7 @@ int mtk_vcodec_dec_queue_init(void *priv, struct vb2_queue *src_vq,
 	dst_vq->io_modes	= VB2_DMABUF | VB2_MMAP;
 	dst_vq->drv_priv	= ctx;
 	dst_vq->buf_struct_size = sizeof(struct mtk_video_dec_buf);
-	dst_vq->ops		= &mtk_vdec_vb2_ops;
+	dst_vq->ops		= ctx->dev->vdec_pdata->vdec_vb2_ops;
 	dst_vq->mem_ops		= &vb2_dma_contig_memops;
 	dst_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
 	dst_vq->lock		= &ctx->dev->dev_mutex;
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h
index cf26b6c1486a..6a18cb3bfe07 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h
@@ -16,6 +16,8 @@
 #define VCODEC_DEC_4K_CODED_HEIGHT	2304U
 #define MTK_VDEC_MAX_W	2048U
 #define MTK_VDEC_MAX_H	1088U
+#define MTK_VDEC_MIN_W	64U
+#define MTK_VDEC_MIN_H	64U
 
 #define MTK_VDEC_IRQ_STATUS_DEC_SUCCESS        0x10000
 
@@ -73,7 +75,20 @@ int mtk_vcodec_dec_queue_init(void *priv, struct vb2_queue *src_vq,
 			   struct vb2_queue *dst_vq);
 void mtk_vcodec_dec_set_default_params(struct mtk_vcodec_ctx *ctx);
 void mtk_vcodec_dec_release(struct mtk_vcodec_ctx *ctx);
-int mtk_vcodec_dec_ctrls_setup(struct mtk_vcodec_ctx *ctx);
+
+/*
+ * VB2 ops
+ */
+int vb2ops_vdec_queue_setup(struct vb2_queue *vq,
+				unsigned int *nbuffers,
+				unsigned int *nplanes,
+				unsigned int sizes[],
+				struct device *alloc_devs[]);
+int vb2ops_vdec_buf_prepare(struct vb2_buffer *vb);
+void vb2ops_vdec_buf_finish(struct vb2_buffer *vb);
+int vb2ops_vdec_buf_init(struct vb2_buffer *vb);
+int vb2ops_vdec_start_streaming(struct vb2_queue *q, unsigned int count);
+void vb2ops_vdec_stop_streaming(struct vb2_queue *q);
 
 
 #endif /* _MTK_VCODEC_DEC_H_ */
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
index 147dfef1638d..533781d4680a 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
@@ -106,7 +106,7 @@ static int fops_vcodec_open(struct file *file)
 	mutex_init(&ctx->lock);
 
 	ctx->type = MTK_INST_DECODER;
-	ret = mtk_vcodec_dec_ctrls_setup(ctx);
+	ret = dev->vdec_pdata->ctrls_setup(ctx);
 	if (ret) {
 		mtk_v4l2_err("Failed to setup mt vcodec controls");
 		goto err_ctrls_setup;
@@ -222,6 +222,7 @@ static int mtk_vcodec_probe(struct platform_device *pdev)
 	INIT_LIST_HEAD(&dev->ctx_list);
 	dev->plat_dev = pdev;
 
+	dev->vdec_pdata = of_device_get_match_data(&pdev->dev);
 	if (!of_property_read_u32(pdev->dev.of_node, "mediatek,vpu",
 				  &rproc_phandle)) {
 		fw_type = VPU;
@@ -349,8 +350,13 @@ static int mtk_vcodec_probe(struct platform_device *pdev)
 	return ret;
 }
 
+extern const struct mtk_vcodec_dec_pdata mtk_vdec_8173_pdata;
+
 static const struct of_device_id mtk_vcodec_match[] = {
-	{.compatible = "mediatek,mt8173-vcodec-dec",},
+	{
+		.compatible = "mediatek,mt8173-vcodec-dec",
+		.data = &mtk_vdec_8173_pdata,
+	},
 	{},
 };
 
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateful.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateful.c
new file mode 100644
index 000000000000..f31f4f94001d
--- /dev/null
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateful.c
@@ -0,0 +1,654 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <media/v4l2-event.h>
+#include <media/v4l2-mem2mem.h>
+#include <media/videobuf2-dma-contig.h>
+
+#include "mtk_vcodec_drv.h"
+#include "mtk_vcodec_dec.h"
+#include "mtk_vcodec_intr.h"
+#include "mtk_vcodec_util.h"
+#include "vdec_drv_if.h"
+#include "mtk_vcodec_dec_pm.h"
+
+static const struct mtk_video_fmt mtk_video_formats[] = {
+	{
+		.fourcc = V4L2_PIX_FMT_H264,
+		.type = MTK_FMT_DEC,
+		.num_planes = 1,
+		.flags = V4L2_FMT_FLAG_DYN_RESOLUTION,
+	},
+	{
+		.fourcc = V4L2_PIX_FMT_VP8,
+		.type = MTK_FMT_DEC,
+		.num_planes = 1,
+		.flags = V4L2_FMT_FLAG_DYN_RESOLUTION,
+	},
+	{
+		.fourcc = V4L2_PIX_FMT_VP9,
+		.type = MTK_FMT_DEC,
+		.num_planes = 1,
+		.flags = V4L2_FMT_FLAG_DYN_RESOLUTION,
+	},
+	{
+		.fourcc = V4L2_PIX_FMT_MT21C,
+		.type = MTK_FMT_FRAME,
+		.num_planes = 2,
+	},
+};
+
+#define NUM_FORMATS ARRAY_SIZE(mtk_video_formats)
+#define DEFAULT_OUT_FMT_IDX	0
+#define DEFAULT_CAP_FMT_IDX	3
+
+static const struct mtk_codec_framesizes mtk_vdec_framesizes[] = {
+	{
+		.fourcc	= V4L2_PIX_FMT_H264,
+		.stepwise = {  MTK_VDEC_MIN_W, MTK_VDEC_MAX_W, 16,
+				MTK_VDEC_MIN_H, MTK_VDEC_MAX_H, 16 },
+	},
+	{
+		.fourcc	= V4L2_PIX_FMT_VP8,
+		.stepwise = {  MTK_VDEC_MIN_W, MTK_VDEC_MAX_W, 16,
+				MTK_VDEC_MIN_H, MTK_VDEC_MAX_H, 16 },
+	},
+	{
+		.fourcc = V4L2_PIX_FMT_VP9,
+		.stepwise = {  MTK_VDEC_MIN_W, MTK_VDEC_MAX_W, 16,
+				MTK_VDEC_MIN_H, MTK_VDEC_MAX_H, 16 },
+	},
+};
+
+#define NUM_SUPPORTED_FRAMESIZE ARRAY_SIZE(mtk_vdec_framesizes)
+
+/*
+ * This function tries to clean all display buffers, the buffers will return
+ * in display order.
+ * Note the buffers returned from codec driver may still be in driver's
+ * reference list.
+ */
+static struct vb2_buffer *get_display_buffer(struct mtk_vcodec_ctx *ctx)
+{
+	struct vdec_fb *disp_frame_buffer = NULL;
+	struct mtk_video_dec_buf *dstbuf;
+	struct vb2_v4l2_buffer *vb;
+
+	mtk_v4l2_debug(3, "[%d]", ctx->id);
+	if (vdec_if_get_param(ctx,
+			GET_PARAM_DISP_FRAME_BUFFER,
+			&disp_frame_buffer)) {
+		mtk_v4l2_err("[%d]Cannot get param : GET_PARAM_DISP_FRAME_BUFFER",
+			ctx->id);
+		return NULL;
+	}
+
+	if (disp_frame_buffer == NULL) {
+		mtk_v4l2_debug(3, "No display frame buffer");
+		return NULL;
+	}
+
+	dstbuf = container_of(disp_frame_buffer, struct mtk_video_dec_buf,
+				frame_buffer);
+	vb = &dstbuf->m2m_buf.vb;
+	mutex_lock(&ctx->lock);
+	if (dstbuf->used) {
+		vb2_set_plane_payload(&vb->vb2_buf, 0,
+				      ctx->picinfo.fb_sz[0]);
+		if (ctx->q_data[MTK_Q_DATA_DST].fmt->num_planes == 2)
+			vb2_set_plane_payload(&vb->vb2_buf, 1,
+					      ctx->picinfo.fb_sz[1]);
+
+		mtk_v4l2_debug(2,
+				"[%d]status=%x queue id=%d to done_list %d",
+				ctx->id, disp_frame_buffer->status,
+				vb->vb2_buf.index,
+				dstbuf->queued_in_vb2);
+
+		v4l2_m2m_buf_done(vb, VB2_BUF_STATE_DONE);
+		ctx->decoded_frame_cnt++;
+	}
+	mutex_unlock(&ctx->lock);
+	return &vb->vb2_buf;
+}
+
+/*
+ * This function tries to clean all capture buffers that are not used as
+ * reference buffers by codec driver any more
+ * In this case, we need re-queue buffer to vb2 buffer if user space
+ * already returns this buffer to v4l2 or this buffer is just the output of
+ * previous sps/pps/resolution change decode, or do nothing if user
+ * space still owns this buffer
+ */
+static struct vb2_buffer *get_free_buffer(struct mtk_vcodec_ctx *ctx)
+{
+	struct mtk_video_dec_buf *dstbuf;
+	struct vdec_fb *free_frame_buffer = NULL;
+	struct vb2_v4l2_buffer *vb;
+
+	if (vdec_if_get_param(ctx,
+				GET_PARAM_FREE_FRAME_BUFFER,
+				&free_frame_buffer)) {
+		mtk_v4l2_err("[%d] Error!! Cannot get param", ctx->id);
+		return NULL;
+	}
+	if (free_frame_buffer == NULL) {
+		mtk_v4l2_debug(3, " No free frame buffer");
+		return NULL;
+	}
+
+	mtk_v4l2_debug(3, "[%d] tmp_frame_addr = 0x%p",
+			ctx->id, free_frame_buffer);
+
+	dstbuf = container_of(free_frame_buffer, struct mtk_video_dec_buf,
+				frame_buffer);
+	vb = &dstbuf->m2m_buf.vb;
+
+	mutex_lock(&ctx->lock);
+	if (dstbuf->used) {
+		if ((dstbuf->queued_in_vb2) &&
+		    (dstbuf->queued_in_v4l2) &&
+		    (free_frame_buffer->status == FB_ST_FREE)) {
+			/*
+			 * After decode sps/pps or non-display buffer, we don't
+			 * need to return capture buffer to user space, but
+			 * just re-queue this capture buffer to vb2 queue.
+			 * This reduce overheads that dq/q unused capture
+			 * buffer. In this case, queued_in_vb2 = true.
+			 */
+			mtk_v4l2_debug(2,
+				"[%d]status=%x queue id=%d to rdy_queue %d",
+				ctx->id, free_frame_buffer->status,
+				vb->vb2_buf.index,
+				dstbuf->queued_in_vb2);
+			v4l2_m2m_buf_queue(ctx->m2m_ctx, vb);
+		} else if (!dstbuf->queued_in_vb2 && dstbuf->queued_in_v4l2) {
+			/*
+			 * If buffer in v4l2 driver but not in vb2 queue yet,
+			 * and we get this buffer from free_list, it means
+			 * that codec driver do not use this buffer as
+			 * reference buffer anymore. We should q buffer to vb2
+			 * queue, so later work thread could get this buffer
+			 * for decode. In this case, queued_in_vb2 = false
+			 * means this buffer is not from previous decode
+			 * output.
+			 */
+			mtk_v4l2_debug(2,
+					"[%d]status=%x queue id=%d to rdy_queue",
+					ctx->id, free_frame_buffer->status,
+					vb->vb2_buf.index);
+			v4l2_m2m_buf_queue(ctx->m2m_ctx, vb);
+			dstbuf->queued_in_vb2 = true;
+		} else {
+			/*
+			 * Codec driver do not need to reference this capture
+			 * buffer and this buffer is not in v4l2 driver.
+			 * Then we don't need to do any thing, just add log when
+			 * we need to debug buffer flow.
+			 * When this buffer q from user space, it could
+			 * directly q to vb2 buffer
+			 */
+			mtk_v4l2_debug(3, "[%d]status=%x err queue id=%d %d %d",
+					ctx->id, free_frame_buffer->status,
+					vb->vb2_buf.index,
+					dstbuf->queued_in_vb2,
+					dstbuf->queued_in_v4l2);
+		}
+		dstbuf->used = false;
+	}
+	mutex_unlock(&ctx->lock);
+	return &vb->vb2_buf;
+}
+
+static void clean_display_buffer(struct mtk_vcodec_ctx *ctx)
+{
+	struct vb2_buffer *framptr;
+
+	do {
+		framptr = get_display_buffer(ctx);
+	} while (framptr);
+}
+
+static void clean_free_buffer(struct mtk_vcodec_ctx *ctx)
+{
+	struct vb2_buffer *framptr;
+
+	do {
+		framptr = get_free_buffer(ctx);
+	} while (framptr);
+}
+
+static void mtk_vdec_queue_res_chg_event(struct mtk_vcodec_ctx *ctx)
+{
+	static const struct v4l2_event ev_src_ch = {
+		.type = V4L2_EVENT_SOURCE_CHANGE,
+		.u.src_change.changes =
+		V4L2_EVENT_SRC_CH_RESOLUTION,
+	};
+
+	mtk_v4l2_debug(1, "[%d]", ctx->id);
+	v4l2_event_queue_fh(&ctx->fh, &ev_src_ch);
+}
+
+static int mtk_vdec_flush_decoder(struct mtk_vcodec_ctx *ctx)
+{
+	bool res_chg;
+	int ret = 0;
+
+	ret = vdec_if_decode(ctx, NULL, NULL, &res_chg);
+	if (ret)
+		mtk_v4l2_err("DecodeFinal failed, ret=%d", ret);
+
+	clean_display_buffer(ctx);
+	clean_free_buffer(ctx);
+
+	return 0;
+}
+
+static void mtk_vdec_update_fmt(struct mtk_vcodec_ctx *ctx,
+				unsigned int pixelformat)
+{
+	const struct mtk_video_fmt *fmt;
+	struct mtk_q_data *dst_q_data;
+	unsigned int k;
+
+	dst_q_data = &ctx->q_data[MTK_Q_DATA_DST];
+	for (k = 0; k < NUM_FORMATS; k++) {
+		fmt = &mtk_video_formats[k];
+		if (fmt->fourcc == pixelformat) {
+			mtk_v4l2_debug(1, "Update cap fourcc(%d -> %d)",
+				dst_q_data->fmt->fourcc, pixelformat);
+			dst_q_data->fmt = fmt;
+			return;
+		}
+	}
+
+	mtk_v4l2_err("Cannot get fourcc(%d), using init value", pixelformat);
+}
+
+static int mtk_vdec_pic_info_update(struct mtk_vcodec_ctx *ctx)
+{
+	unsigned int dpbsize = 0;
+	int ret;
+
+	if (vdec_if_get_param(ctx,
+				GET_PARAM_PIC_INFO,
+				&ctx->last_decoded_picinfo)) {
+		mtk_v4l2_err("[%d]Error!! Cannot get param : GET_PARAM_PICTURE_INFO ERR",
+				ctx->id);
+		return -EINVAL;
+	}
+
+	if (ctx->last_decoded_picinfo.pic_w == 0 ||
+		ctx->last_decoded_picinfo.pic_h == 0 ||
+		ctx->last_decoded_picinfo.buf_w == 0 ||
+		ctx->last_decoded_picinfo.buf_h == 0) {
+		mtk_v4l2_err("Cannot get correct pic info");
+		return -EINVAL;
+	}
+
+	if (ctx->last_decoded_picinfo.cap_fourcc != ctx->picinfo.cap_fourcc &&
+		ctx->picinfo.cap_fourcc != 0)
+		mtk_vdec_update_fmt(ctx, ctx->picinfo.cap_fourcc);
+
+	if ((ctx->last_decoded_picinfo.pic_w == ctx->picinfo.pic_w) ||
+	    (ctx->last_decoded_picinfo.pic_h == ctx->picinfo.pic_h))
+		return 0;
+
+	mtk_v4l2_debug(1,
+			"[%d]-> new(%d,%d), old(%d,%d), real(%d,%d)",
+			ctx->id, ctx->last_decoded_picinfo.pic_w,
+			ctx->last_decoded_picinfo.pic_h,
+			ctx->picinfo.pic_w, ctx->picinfo.pic_h,
+			ctx->last_decoded_picinfo.buf_w,
+			ctx->last_decoded_picinfo.buf_h);
+
+	ret = vdec_if_get_param(ctx, GET_PARAM_DPB_SIZE, &dpbsize);
+	if (dpbsize == 0)
+		mtk_v4l2_err("Incorrect dpb size, ret=%d", ret);
+
+	ctx->dpb_size = dpbsize;
+
+	return ret;
+}
+
+static void mtk_vdec_worker(struct work_struct *work)
+{
+	struct mtk_vcodec_ctx *ctx = container_of(work, struct mtk_vcodec_ctx,
+				decode_work);
+	struct mtk_vcodec_dev *dev = ctx->dev;
+	struct vb2_v4l2_buffer *src_buf, *dst_buf;
+	struct mtk_vcodec_mem buf;
+	struct vdec_fb *pfb;
+	bool res_chg = false;
+	int ret;
+	struct mtk_video_dec_buf *dst_buf_info, *src_buf_info;
+
+	src_buf = v4l2_m2m_next_src_buf(ctx->m2m_ctx);
+	if (src_buf == NULL) {
+		v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx);
+		mtk_v4l2_debug(1, "[%d] src_buf empty!!", ctx->id);
+		return;
+	}
+
+	dst_buf = v4l2_m2m_next_dst_buf(ctx->m2m_ctx);
+	if (dst_buf == NULL) {
+		v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx);
+		mtk_v4l2_debug(1, "[%d] dst_buf empty!!", ctx->id);
+		return;
+	}
+
+	src_buf_info = container_of(src_buf, struct mtk_video_dec_buf,
+				    m2m_buf.vb);
+	dst_buf_info = container_of(dst_buf, struct mtk_video_dec_buf,
+				    m2m_buf.vb);
+
+	pfb = &dst_buf_info->frame_buffer;
+	pfb->base_y.va = vb2_plane_vaddr(&dst_buf->vb2_buf, 0);
+	pfb->base_y.dma_addr = vb2_dma_contig_plane_dma_addr(&dst_buf->vb2_buf, 0);
+	pfb->base_y.size = ctx->picinfo.fb_sz[0];
+
+	pfb->base_c.va = vb2_plane_vaddr(&dst_buf->vb2_buf, 1);
+	pfb->base_c.dma_addr = vb2_dma_contig_plane_dma_addr(&dst_buf->vb2_buf, 1);
+	pfb->base_c.size = ctx->picinfo.fb_sz[1];
+	pfb->status = 0;
+	mtk_v4l2_debug(3, "===>[%d] vdec_if_decode() ===>", ctx->id);
+
+	mtk_v4l2_debug(3,
+			"id=%d Framebuf  pfb=%p VA=%p Y_DMA=%pad C_DMA=%pad Size=%zx",
+			dst_buf->vb2_buf.index, pfb,
+			pfb->base_y.va, &pfb->base_y.dma_addr,
+			&pfb->base_c.dma_addr, pfb->base_y.size);
+
+	if (src_buf_info->lastframe) {
+		mtk_v4l2_debug(1, "Got empty flush input buffer.");
+		src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx);
+
+		/* update dst buf status */
+		dst_buf = v4l2_m2m_dst_buf_remove(ctx->m2m_ctx);
+		mutex_lock(&ctx->lock);
+		dst_buf_info->used = false;
+		mutex_unlock(&ctx->lock);
+
+		vdec_if_decode(ctx, NULL, NULL, &res_chg);
+		clean_display_buffer(ctx);
+		vb2_set_plane_payload(&dst_buf->vb2_buf, 0, 0);
+		if (ctx->q_data[MTK_Q_DATA_DST].fmt->num_planes == 2)
+			vb2_set_plane_payload(&dst_buf->vb2_buf, 1, 0);
+		dst_buf->flags |= V4L2_BUF_FLAG_LAST;
+		v4l2_m2m_buf_done(dst_buf, VB2_BUF_STATE_DONE);
+		clean_free_buffer(ctx);
+		v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx);
+		return;
+	}
+	buf.va = vb2_plane_vaddr(&src_buf->vb2_buf, 0);
+	buf.dma_addr = vb2_dma_contig_plane_dma_addr(&src_buf->vb2_buf, 0);
+	buf.size = (size_t)src_buf->vb2_buf.planes[0].bytesused;
+	if (!buf.va) {
+		v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx);
+		mtk_v4l2_err("[%d] id=%d src_addr is NULL!!",
+				ctx->id, src_buf->vb2_buf.index);
+		return;
+	}
+	mtk_v4l2_debug(3, "[%d] Bitstream VA=%p DMA=%pad Size=%zx vb=%p",
+			ctx->id, buf.va, &buf.dma_addr, buf.size, src_buf);
+	dst_buf->vb2_buf.timestamp = src_buf->vb2_buf.timestamp;
+	dst_buf->timecode = src_buf->timecode;
+	mutex_lock(&ctx->lock);
+	dst_buf_info->used = true;
+	mutex_unlock(&ctx->lock);
+	src_buf_info->used = true;
+
+	ret = vdec_if_decode(ctx, &buf, pfb, &res_chg);
+
+	if (ret) {
+		mtk_v4l2_err(
+			" <===[%d], src_buf[%d] sz=0x%zx pts=%llu dst_buf[%d] vdec_if_decode() ret=%d res_chg=%d===>",
+			ctx->id,
+			src_buf->vb2_buf.index,
+			buf.size,
+			src_buf->vb2_buf.timestamp,
+			dst_buf->vb2_buf.index,
+			ret, res_chg);
+		src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx);
+		if (ret == -EIO) {
+			mutex_lock(&ctx->lock);
+			src_buf_info->error = true;
+			mutex_unlock(&ctx->lock);
+		}
+		v4l2_m2m_buf_done(src_buf, VB2_BUF_STATE_ERROR);
+	} else if (!res_chg) {
+		/*
+		 * we only return src buffer with VB2_BUF_STATE_DONE
+		 * when decode success without resolution change
+		 */
+		src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx);
+		v4l2_m2m_buf_done(src_buf, VB2_BUF_STATE_DONE);
+	}
+
+	dst_buf = v4l2_m2m_dst_buf_remove(ctx->m2m_ctx);
+	clean_display_buffer(ctx);
+	clean_free_buffer(ctx);
+
+	if (!ret && res_chg) {
+		mtk_vdec_pic_info_update(ctx);
+		/*
+		 * On encountering a resolution change in the stream.
+		 * The driver must first process and decode all
+		 * remaining buffers from before the resolution change
+		 * point, so call flush decode here
+		 */
+		mtk_vdec_flush_decoder(ctx);
+		/*
+		 * After all buffers containing decoded frames from
+		 * before the resolution change point ready to be
+		 * dequeued on the CAPTURE queue, the driver sends a
+		 * V4L2_EVENT_SOURCE_CHANGE event for source change
+		 * type V4L2_EVENT_SRC_CH_RESOLUTION
+		 */
+		mtk_vdec_queue_res_chg_event(ctx);
+	}
+	v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx);
+}
+
+static void vb2ops_vdec_stateful_buf_queue(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *src_buf;
+	struct mtk_vcodec_mem src_mem;
+	bool res_chg = false;
+	int ret = 0;
+	unsigned int dpbsize = 1, i = 0;
+	struct mtk_vcodec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
+	struct vb2_v4l2_buffer *vb2_v4l2 = NULL;
+	struct mtk_video_dec_buf *buf = NULL;
+	struct mtk_q_data *dst_q_data;
+
+	mtk_v4l2_debug(3, "[%d] (%d) id=%d, vb=%p",
+			ctx->id, vb->vb2_queue->type,
+			vb->index, vb);
+	/*
+	 * check if this buffer is ready to be used after decode
+	 */
+	if (vb->vb2_queue->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		vb2_v4l2 = to_vb2_v4l2_buffer(vb);
+		buf = container_of(vb2_v4l2, struct mtk_video_dec_buf,
+				   m2m_buf.vb);
+		mutex_lock(&ctx->lock);
+		if (!buf->used) {
+			v4l2_m2m_buf_queue(ctx->m2m_ctx, vb2_v4l2);
+			buf->queued_in_vb2 = true;
+			buf->queued_in_v4l2 = true;
+		} else {
+			buf->queued_in_vb2 = false;
+			buf->queued_in_v4l2 = true;
+		}
+		mutex_unlock(&ctx->lock);
+		return;
+	}
+
+	v4l2_m2m_buf_queue(ctx->m2m_ctx, to_vb2_v4l2_buffer(vb));
+
+	if (ctx->state != MTK_STATE_INIT) {
+		mtk_v4l2_debug(3, "[%d] already init driver %d",
+				ctx->id, ctx->state);
+		return;
+	}
+
+	src_buf = v4l2_m2m_next_src_buf(ctx->m2m_ctx);
+	if (!src_buf) {
+		mtk_v4l2_err("No src buffer");
+		return;
+	}
+	buf = container_of(src_buf, struct mtk_video_dec_buf, m2m_buf.vb);
+	if (buf->lastframe) {
+		/* This shouldn't happen. Just in case. */
+		mtk_v4l2_err("Invalid flush buffer.");
+		v4l2_m2m_src_buf_remove(ctx->m2m_ctx);
+		return;
+	}
+
+	src_mem.va = vb2_plane_vaddr(&src_buf->vb2_buf, 0);
+	src_mem.dma_addr = vb2_dma_contig_plane_dma_addr(&src_buf->vb2_buf, 0);
+	src_mem.size = (size_t)src_buf->vb2_buf.planes[0].bytesused;
+	mtk_v4l2_debug(2,
+			"[%d] buf id=%d va=%p dma=%pad size=%zx",
+			ctx->id, src_buf->vb2_buf.index,
+			src_mem.va, &src_mem.dma_addr,
+			src_mem.size);
+
+	ret = vdec_if_decode(ctx, &src_mem, NULL, &res_chg);
+	if (ret || !res_chg) {
+		/*
+		 * fb == NULL means to parse SPS/PPS header or
+		 * resolution info in src_mem. Decode can fail
+		 * if there is no SPS header or picture info
+		 * in bs
+		 */
+
+		src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx);
+		if (ret == -EIO) {
+			mtk_v4l2_err("[%d] Unrecoverable error in vdec_if_decode.",
+					ctx->id);
+			ctx->state = MTK_STATE_ABORT;
+			v4l2_m2m_buf_done(src_buf, VB2_BUF_STATE_ERROR);
+		} else {
+			v4l2_m2m_buf_done(src_buf, VB2_BUF_STATE_DONE);
+		}
+		mtk_v4l2_debug(ret ? 0 : 1,
+			       "[%d] vdec_if_decode() src_buf=%d, size=%zu, fail=%d, res_chg=%d",
+			       ctx->id, src_buf->vb2_buf.index,
+			       src_mem.size, ret, res_chg);
+		return;
+	}
+
+	if (vdec_if_get_param(ctx, GET_PARAM_PIC_INFO, &ctx->picinfo)) {
+		mtk_v4l2_err("[%d]Error!! Cannot get param : GET_PARAM_PICTURE_INFO ERR",
+				ctx->id);
+		return;
+	}
+
+	ctx->last_decoded_picinfo = ctx->picinfo;
+	dst_q_data = &ctx->q_data[MTK_Q_DATA_DST];
+	for (i = 0; i < dst_q_data->fmt->num_planes; i++) {
+		dst_q_data->sizeimage[i] = ctx->picinfo.fb_sz[i];
+		dst_q_data->bytesperline[i] = ctx->picinfo.buf_w;
+	}
+
+	mtk_v4l2_debug(2, "[%d] vdec_if_init() OK wxh=%dx%d pic wxh=%dx%d sz[0]=0x%x sz[1]=0x%x",
+			ctx->id,
+			ctx->picinfo.buf_w, ctx->picinfo.buf_h,
+			ctx->picinfo.pic_w, ctx->picinfo.pic_h,
+			dst_q_data->sizeimage[0],
+			dst_q_data->sizeimage[1]);
+
+	ret = vdec_if_get_param(ctx, GET_PARAM_DPB_SIZE, &dpbsize);
+	if (dpbsize == 0)
+		mtk_v4l2_err("[%d] GET_PARAM_DPB_SIZE fail=%d", ctx->id, ret);
+
+	ctx->dpb_size = dpbsize;
+	ctx->state = MTK_STATE_HEADER;
+	mtk_v4l2_debug(1, "[%d] dpbsize=%d", ctx->id, ctx->dpb_size);
+
+	mtk_vdec_queue_res_chg_event(ctx);
+}
+
+static int mtk_vdec_g_v_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct mtk_vcodec_ctx *ctx = ctrl_to_ctx(ctrl);
+	int ret = 0;
+
+	switch (ctrl->id) {
+	case V4L2_CID_MIN_BUFFERS_FOR_CAPTURE:
+		if (ctx->state >= MTK_STATE_HEADER) {
+			ctrl->val = ctx->dpb_size;
+		} else {
+			mtk_v4l2_debug(0, "Seqinfo not ready");
+			ctrl->val = 0;
+		}
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	return ret;
+}
+
+static const struct v4l2_ctrl_ops mtk_vcodec_dec_ctrl_ops = {
+	.g_volatile_ctrl = mtk_vdec_g_v_ctrl,
+};
+
+static int mtk_vcodec_dec_ctrls_setup(struct mtk_vcodec_ctx *ctx)
+{
+	struct v4l2_ctrl *ctrl;
+
+	v4l2_ctrl_handler_init(&ctx->ctrl_hdl, 1);
+
+	ctrl = v4l2_ctrl_new_std(&ctx->ctrl_hdl,
+				&mtk_vcodec_dec_ctrl_ops,
+				V4L2_CID_MIN_BUFFERS_FOR_CAPTURE,
+				0, 32, 1, 1);
+	ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE;
+	v4l2_ctrl_new_std_menu(&ctx->ctrl_hdl,
+				&mtk_vcodec_dec_ctrl_ops,
+				V4L2_CID_MPEG_VIDEO_VP9_PROFILE,
+				V4L2_MPEG_VIDEO_VP9_PROFILE_0,
+				0, V4L2_MPEG_VIDEO_VP9_PROFILE_0);
+
+	if (ctx->ctrl_hdl.error) {
+		mtk_v4l2_err("Adding control failed %d",
+				ctx->ctrl_hdl.error);
+		return ctx->ctrl_hdl.error;
+	}
+
+	v4l2_ctrl_handler_setup(&ctx->ctrl_hdl);
+	return 0;
+}
+
+static void mtk_init_vdec_params(struct mtk_vcodec_ctx *ctx)
+{
+}
+
+static struct vb2_ops mtk_vdec_frame_vb2_ops = {
+	.queue_setup	= vb2ops_vdec_queue_setup,
+	.buf_prepare	= vb2ops_vdec_buf_prepare,
+	.wait_prepare	= vb2_ops_wait_prepare,
+	.wait_finish	= vb2_ops_wait_finish,
+	.start_streaming	= vb2ops_vdec_start_streaming,
+
+	.buf_queue	= vb2ops_vdec_stateful_buf_queue,
+	.buf_init	= vb2ops_vdec_buf_init,
+	.buf_finish	= vb2ops_vdec_buf_finish,
+	.stop_streaming	= vb2ops_vdec_stop_streaming,
+};
+
+const struct mtk_vcodec_dec_pdata mtk_vdec_8173_pdata = {
+	.init_vdec_params = mtk_init_vdec_params,
+	.ctrls_setup = mtk_vcodec_dec_ctrls_setup,
+	.vdec_vb2_ops = &mtk_vdec_frame_vb2_ops,
+	.vdec_formats = mtk_video_formats,
+	.num_formats = NUM_FORMATS,
+	.default_out_fmt = &mtk_video_formats[DEFAULT_OUT_FMT_IDX],
+	.default_cap_fmt = &mtk_video_formats[DEFAULT_CAP_FMT_IDX],
+	.vdec_framesizes = mtk_vdec_framesizes,
+	.num_framesizes = NUM_SUPPORTED_FRAMESIZE,
+	.worker = mtk_vdec_worker,
+	.flush_decoder = mtk_vdec_flush_decoder,
+};
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
index d03cca95e99b..85af0bffc7be 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
@@ -304,6 +304,45 @@ enum mtk_chip {
 	MTK_MT8183,
 };
 
+/**
+ * struct mtk_vcodec_dec_pdata - compatible data for each IC
+ * @init_vdec_params: init vdec params
+ * @ctrls_setup: init vcodec dec ctrls
+ * @worker: worker to start a decode job
+ * @flush_decoder: function that flushes the decoder
+ *
+ * @vdec_vb2_ops: struct vb2_ops
+ *
+ * @vdec_formats: supported video decoder formats
+ * @num_formats: count of video decoder formats
+ * @default_out_fmt: default output buffer format
+ * @default_cap_fmt: default capture buffer format
+ *
+ * @vdec_framesizes: supported video decoder frame sizes
+ * @num_framesizes: count of video decoder frame sizes
+ *
+ * @uses_stateless_api: whether the decoder uses the stateless API with requests
+ */
+
+struct mtk_vcodec_dec_pdata {
+	void (*init_vdec_params)(struct mtk_vcodec_ctx *ctx);
+	int (*ctrls_setup)(struct mtk_vcodec_ctx *ctx);
+	void (*worker)(struct work_struct *work);
+	int (*flush_decoder)(struct mtk_vcodec_ctx *ctx);
+
+	struct vb2_ops *vdec_vb2_ops;
+
+	const struct mtk_video_fmt *vdec_formats;
+	const int num_formats;
+	const struct mtk_video_fmt *default_out_fmt;
+	const struct mtk_video_fmt *default_cap_fmt;
+
+	const struct mtk_codec_framesizes *vdec_framesizes;
+	const int num_framesizes;
+
+	bool uses_stateless_api;
+};
+
 /**
  * struct mtk_vcodec_enc_pdata - compatible data for each IC
  *
@@ -347,6 +386,7 @@ struct mtk_vcodec_enc_pdata {
  * @curr_ctx: The context that is waiting for codec hardware
  *
  * @reg_base: Mapped address of MTK Vcodec registers.
+ * @vdec_pdata: Current arch private data.
  *
  * @fw_handler: used to communicate with the firmware.
  * @id_counter: used to identify current opened instance
@@ -380,6 +420,7 @@ struct mtk_vcodec_dev {
 	spinlock_t irqlock;
 	struct mtk_vcodec_ctx *curr_ctx;
 	void __iomem *reg_base[NUM_MAX_VCODEC_REG_BASE];
+	const struct mtk_vcodec_dec_pdata *vdec_pdata;
 	const struct mtk_vcodec_enc_pdata *venc_pdata;
 
 	struct mtk_vcodec_fw *fw_handler;
-- 
2.31.1.498.g6c1eba8ee3d-goog


^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v4 02/15] media: mtk-vcodec: vdec: handle firmware version field
  2021-04-27 11:15 [PATCH v4 00/15] media: mtk-vcodec: support for MT8183 decoder Alexandre Courbot
  2021-04-27 11:15 ` [PATCH v4 01/15] media: mtk-vcodec: vdec: move stateful ops into their own file Alexandre Courbot
@ 2021-04-27 11:15 ` Alexandre Courbot
  2021-04-27 11:15 ` [PATCH v4 03/15] media: mtk-vcodec: support version 2 of decoder firmware ABI Alexandre Courbot
                   ` (14 subsequent siblings)
  16 siblings, 0 replies; 35+ messages in thread
From: Alexandre Courbot @ 2021-04-27 11:15 UTC (permalink / raw)
  To: Tiffany Lin, Andrew-CT Chen, Rob Herring, Yunfei Dong
  Cc: Mauro Carvalho Chehab, Hans Verkuil, linux-media, linux-kernel,
	linux-mediatek, Alexandre Courbot

Firmwares for decoders newer than MT8173 will include an ABI version
number in their initialization ack message. Add the capacity to manage
it and make initialization fail if the firmware ABI is of a version that
we don't support.

For MT8173, this ABI version field does not exist ; thus ignore it on
this chip. There should only be one firmware version available for it
anyway.

Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
---
 .../mtk-vcodec/mtk_vcodec_dec_stateful.c      |  1 +
 .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  4 ++++
 .../media/platform/mtk-vcodec/vdec_ipi_msg.h  |  5 +++++
 .../media/platform/mtk-vcodec/vdec_vpu_if.c   | 21 +++++++++++++++++--
 4 files changed, 29 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateful.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateful.c
index f31f4f94001d..c5538fcfc9a5 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateful.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateful.c
@@ -640,6 +640,7 @@ static struct vb2_ops mtk_vdec_frame_vb2_ops = {
 };
 
 const struct mtk_vcodec_dec_pdata mtk_vdec_8173_pdata = {
+	.chip = MTK_MT8173,
 	.init_vdec_params = mtk_init_vdec_params,
 	.ctrls_setup = mtk_vcodec_dec_ctrls_setup,
 	.vdec_vb2_ops = &mtk_vdec_frame_vb2_ops,
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
index 85af0bffc7be..e5b8309785e1 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
@@ -321,6 +321,8 @@ enum mtk_chip {
  * @vdec_framesizes: supported video decoder frame sizes
  * @num_framesizes: count of video decoder frame sizes
  *
+ * @chip: chip this decoder is compatible with
+ *
  * @uses_stateless_api: whether the decoder uses the stateless API with requests
  */
 
@@ -340,6 +342,8 @@ struct mtk_vcodec_dec_pdata {
 	const struct mtk_codec_framesizes *vdec_framesizes;
 	const int num_framesizes;
 
+	enum mtk_chip chip;
+
 	bool uses_stateless_api;
 };
 
diff --git a/drivers/media/platform/mtk-vcodec/vdec_ipi_msg.h b/drivers/media/platform/mtk-vcodec/vdec_ipi_msg.h
index 47a1c1c0fd04..eb66729fda63 100644
--- a/drivers/media/platform/mtk-vcodec/vdec_ipi_msg.h
+++ b/drivers/media/platform/mtk-vcodec/vdec_ipi_msg.h
@@ -83,12 +83,17 @@ struct vdec_ap_ipi_dec_start {
  * @status	: VPU exeuction result
  * @ap_inst_addr	: AP vcodec_vpu_inst instance address
  * @vpu_inst_addr	: VPU decoder instance address
+ * @vdec_abi_version:	ABI version of the firmware. Kernel can use it to
+ *			ensure that it is compatible with the firmware.
+ *			This field is not valid for MT8173 and must not be
+ *			accessed for this chip.
  */
 struct vdec_vpu_ipi_init_ack {
 	uint32_t msg_id;
 	int32_t status;
 	uint64_t ap_inst_addr;
 	uint32_t vpu_inst_addr;
+	uint32_t vdec_abi_version;
 };
 
 #endif
diff --git a/drivers/media/platform/mtk-vcodec/vdec_vpu_if.c b/drivers/media/platform/mtk-vcodec/vdec_vpu_if.c
index 58b0e6fa8fd2..203089213e67 100644
--- a/drivers/media/platform/mtk-vcodec/vdec_vpu_if.c
+++ b/drivers/media/platform/mtk-vcodec/vdec_vpu_if.c
@@ -24,6 +24,22 @@ static void handle_init_ack_msg(const struct vdec_vpu_ipi_init_ack *msg)
 	vpu->inst_addr = msg->vpu_inst_addr;
 
 	mtk_vcodec_debug(vpu, "- vpu_inst_addr = 0x%x", vpu->inst_addr);
+
+	/* Firmware version field does not exist on MT8173. */
+	if (vpu->ctx->dev->vdec_pdata->chip == MTK_MT8173)
+		return;
+
+	/* Check firmware version. */
+	mtk_vcodec_debug(vpu, "firmware version 0x%x\n", msg->vdec_abi_version);
+	switch (msg->vdec_abi_version) {
+	case 1:
+		break;
+	default:
+		mtk_vcodec_err(vpu, "unhandled firmware version 0x%x\n",
+			       msg->vdec_abi_version);
+		vpu->failure = 1;
+		break;
+	}
 }
 
 /*
@@ -44,6 +60,9 @@ static void vpu_dec_ipi_handler(void *data, unsigned int len, void *priv)
 
 	mtk_vcodec_debug(vpu, "+ id=%X", msg->msg_id);
 
+	vpu->failure = msg->status;
+	vpu->signaled = 1;
+
 	if (msg->status == 0) {
 		switch (msg->msg_id) {
 		case VPU_IPIMSG_DEC_INIT_ACK:
@@ -63,8 +82,6 @@ static void vpu_dec_ipi_handler(void *data, unsigned int len, void *priv)
 	}
 
 	mtk_vcodec_debug(vpu, "- id=%X", msg->msg_id);
-	vpu->failure = msg->status;
-	vpu->signaled = 1;
 }
 
 static int vcodec_vpu_send_msg(struct vdec_vpu_inst *vpu, void *msg, int len)
-- 
2.31.1.498.g6c1eba8ee3d-goog


^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v4 03/15] media: mtk-vcodec: support version 2 of decoder firmware ABI
  2021-04-27 11:15 [PATCH v4 00/15] media: mtk-vcodec: support for MT8183 decoder Alexandre Courbot
  2021-04-27 11:15 ` [PATCH v4 01/15] media: mtk-vcodec: vdec: move stateful ops into their own file Alexandre Courbot
  2021-04-27 11:15 ` [PATCH v4 02/15] media: mtk-vcodec: vdec: handle firmware version field Alexandre Courbot
@ 2021-04-27 11:15 ` Alexandre Courbot
  2021-04-27 11:15 ` [PATCH v4 04/15] media: add Mediatek's MM21 format Alexandre Courbot
                   ` (13 subsequent siblings)
  16 siblings, 0 replies; 35+ messages in thread
From: Alexandre Courbot @ 2021-04-27 11:15 UTC (permalink / raw)
  To: Tiffany Lin, Andrew-CT Chen, Rob Herring, Yunfei Dong
  Cc: Mauro Carvalho Chehab, Hans Verkuil, linux-media, linux-kernel,
	linux-mediatek, Alexandre Courbot

Add support for decoder firmware version 2, which makes the kernel
responsible for managing the VSI context and is used for stateless
codecs.

Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
---
 .../media/platform/mtk-vcodec/vdec_ipi_msg.h  | 18 +++++++++---
 .../media/platform/mtk-vcodec/vdec_vpu_if.c   | 28 +++++++++++++++----
 .../media/platform/mtk-vcodec/vdec_vpu_if.h   |  5 ++++
 3 files changed, 42 insertions(+), 9 deletions(-)

diff --git a/drivers/media/platform/mtk-vcodec/vdec_ipi_msg.h b/drivers/media/platform/mtk-vcodec/vdec_ipi_msg.h
index eb66729fda63..a0e773ae3ab3 100644
--- a/drivers/media/platform/mtk-vcodec/vdec_ipi_msg.h
+++ b/drivers/media/platform/mtk-vcodec/vdec_ipi_msg.h
@@ -29,11 +29,15 @@ enum vdec_ipi_msgid {
 /**
  * struct vdec_ap_ipi_cmd - generic AP to VPU ipi command format
  * @msg_id	: vdec_ipi_msgid
- * @vpu_inst_addr	: VPU decoder instance address
+ * @vpu_inst_addr : VPU decoder instance address. Used if ABI version < 2.
+ * @inst_id     : instance ID. Used if the ABI version >= 2.
  */
 struct vdec_ap_ipi_cmd {
 	uint32_t msg_id;
-	uint32_t vpu_inst_addr;
+	union {
+		uint32_t vpu_inst_addr;
+		uint32_t inst_id;
+	};
 };
 
 /**
@@ -63,7 +67,8 @@ struct vdec_ap_ipi_init {
 /**
  * struct vdec_ap_ipi_dec_start - for AP_IPIMSG_DEC_START
  * @msg_id	: AP_IPIMSG_DEC_START
- * @vpu_inst_addr	: VPU decoder instance address
+ * @vpu_inst_addr : VPU decoder instance address. Used if ABI version < 2.
+ * @inst_id     : instance ID. Used if the ABI version >= 2.
  * @data	: Header info
  *	H264 decoder [0]:buf_sz [1]:nal_start
  *	VP8 decoder  [0]:width/height
@@ -72,7 +77,10 @@ struct vdec_ap_ipi_init {
  */
 struct vdec_ap_ipi_dec_start {
 	uint32_t msg_id;
-	uint32_t vpu_inst_addr;
+	union {
+		uint32_t vpu_inst_addr;
+		uint32_t inst_id;
+	};
 	uint32_t data[3];
 	uint32_t reserved;
 };
@@ -87,6 +95,7 @@ struct vdec_ap_ipi_dec_start {
  *			ensure that it is compatible with the firmware.
  *			This field is not valid for MT8173 and must not be
  *			accessed for this chip.
+ * @inst_id     : instance ID. Valid only if the ABI version >= 2.
  */
 struct vdec_vpu_ipi_init_ack {
 	uint32_t msg_id;
@@ -94,6 +103,7 @@ struct vdec_vpu_ipi_init_ack {
 	uint64_t ap_inst_addr;
 	uint32_t vpu_inst_addr;
 	uint32_t vdec_abi_version;
+	uint32_t inst_id;
 };
 
 #endif
diff --git a/drivers/media/platform/mtk-vcodec/vdec_vpu_if.c b/drivers/media/platform/mtk-vcodec/vdec_vpu_if.c
index 203089213e67..5dffc459a33d 100644
--- a/drivers/media/platform/mtk-vcodec/vdec_vpu_if.c
+++ b/drivers/media/platform/mtk-vcodec/vdec_vpu_if.c
@@ -25,18 +25,30 @@ static void handle_init_ack_msg(const struct vdec_vpu_ipi_init_ack *msg)
 
 	mtk_vcodec_debug(vpu, "- vpu_inst_addr = 0x%x", vpu->inst_addr);
 
+	/* Set default ABI version if dealing with unversioned firmware. */
+	vpu->fw_abi_version = 0;
+	/*
+	 * Instance ID is only used if ABI version >= 2. Initialize it with
+	 * garbage by default.
+	 */
+	vpu->inst_id = 0xdeadbeef;
+
 	/* Firmware version field does not exist on MT8173. */
 	if (vpu->ctx->dev->vdec_pdata->chip == MTK_MT8173)
 		return;
 
 	/* Check firmware version. */
-	mtk_vcodec_debug(vpu, "firmware version 0x%x\n", msg->vdec_abi_version);
-	switch (msg->vdec_abi_version) {
+	vpu->fw_abi_version = msg->vdec_abi_version;
+	mtk_vcodec_debug(vpu, "firmware version 0x%x\n", vpu->fw_abi_version);
+	switch (vpu->fw_abi_version) {
 	case 1:
 		break;
+	case 2:
+		vpu->inst_id = msg->inst_id;
+		break;
 	default:
 		mtk_vcodec_err(vpu, "unhandled firmware version 0x%x\n",
-			       msg->vdec_abi_version);
+			       vpu->fw_abi_version);
 		vpu->failure = 1;
 		break;
 	}
@@ -113,7 +125,10 @@ static int vcodec_send_ap_ipi(struct vdec_vpu_inst *vpu, unsigned int msg_id)
 
 	memset(&msg, 0, sizeof(msg));
 	msg.msg_id = msg_id;
-	msg.vpu_inst_addr = vpu->inst_addr;
+	if (vpu->fw_abi_version < 2)
+		msg.vpu_inst_addr = vpu->inst_addr;
+	else
+		msg.inst_id = vpu->inst_id;
 
 	err = vcodec_vpu_send_msg(vpu, &msg, sizeof(msg));
 	mtk_vcodec_debug(vpu, "- id=%X ret=%d", msg_id, err);
@@ -163,7 +178,10 @@ int vpu_dec_start(struct vdec_vpu_inst *vpu, uint32_t *data, unsigned int len)
 
 	memset(&msg, 0, sizeof(msg));
 	msg.msg_id = AP_IPIMSG_DEC_START;
-	msg.vpu_inst_addr = vpu->inst_addr;
+	if (vpu->fw_abi_version < 2)
+		msg.vpu_inst_addr = vpu->inst_addr;
+	else
+		msg.inst_id = vpu->inst_id;
 
 	for (i = 0; i < len; i++)
 		msg.data[i] = data[i];
diff --git a/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h b/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h
index 85224eb7e34b..c2ed5b6cab8b 100644
--- a/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h
+++ b/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h
@@ -18,6 +18,9 @@ struct mtk_vcodec_ctx;
  *                for control and info share
  * @failure     : VPU execution result status, 0: success, others: fail
  * @inst_addr	: VPU decoder instance address
+ * @fw_abi_version : ABI version of the firmware.
+ * @inst_id	: if fw_abi_version >= 2, contains the instance ID to be given
+ *                in place of inst_addr in messages.
  * @signaled    : 1 - Host has received ack message from VPU, 0 - not received
  * @ctx         : context for v4l2 layer integration
  * @dev		: platform device of VPU
@@ -29,6 +32,8 @@ struct vdec_vpu_inst {
 	void *vsi;
 	int32_t failure;
 	uint32_t inst_addr;
+	uint32_t fw_abi_version;
+	uint32_t inst_id;
 	unsigned int signaled;
 	struct mtk_vcodec_ctx *ctx;
 	wait_queue_head_t wq;
-- 
2.31.1.498.g6c1eba8ee3d-goog


^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v4 04/15] media: add Mediatek's MM21 format
  2021-04-27 11:15 [PATCH v4 00/15] media: mtk-vcodec: support for MT8183 decoder Alexandre Courbot
                   ` (2 preceding siblings ...)
  2021-04-27 11:15 ` [PATCH v4 03/15] media: mtk-vcodec: support version 2 of decoder firmware ABI Alexandre Courbot
@ 2021-04-27 11:15 ` Alexandre Courbot
  2021-04-29  7:16   ` Hans Verkuil
  2021-04-27 11:15 ` [PATCH v4 05/15] media: mtk-vcodec: vdec: support stateless API Alexandre Courbot
                   ` (12 subsequent siblings)
  16 siblings, 1 reply; 35+ messages in thread
From: Alexandre Courbot @ 2021-04-27 11:15 UTC (permalink / raw)
  To: Tiffany Lin, Andrew-CT Chen, Rob Herring, Yunfei Dong
  Cc: Mauro Carvalho Chehab, Hans Verkuil, linux-media, linux-kernel,
	linux-mediatek, Alexandre Courbot

Add Mediatek's non-compressed 8 bit block video mode. This format is
produced by the MT8183 codec and can be converted to a non-proprietary
format by the MDP3 component.

Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
---
 Documentation/userspace-api/media/v4l/pixfmt-reserved.rst | 7 +++++++
 drivers/media/v4l2-core/v4l2-ioctl.c                      | 1 +
 include/uapi/linux/videodev2.h                            | 1 +
 3 files changed, 9 insertions(+)

diff --git a/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst b/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst
index 0b879c0da713..42357b0b3535 100644
--- a/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst
+++ b/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst
@@ -246,6 +246,13 @@ please make a proposal on the linux-media mailing list.
 	It is an opaque intermediate format and the MDP hardware must be
 	used to convert ``V4L2_PIX_FMT_MT21C`` to ``V4L2_PIX_FMT_NV12M``,
 	``V4L2_PIX_FMT_YUV420M`` or ``V4L2_PIX_FMT_YVU420``.
+    * .. _V4L2-PIX-FMT-MM21:
+
+      - ``V4L2_PIX_FMT_MM21``
+      - 'MM21'
+      - Non-compressed, tiled two-planar format used by Mediatek MT8183.
+	This is an opaque intermediate format and the MDP3 hardware can be
+	used to convert it to other formats.
     * .. _V4L2-PIX-FMT-SUNXI-TILED-NV12:
 
       - ``V4L2_PIX_FMT_SUNXI_TILED_NV12``
diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
index 6a5d1c6d11d6..608e3ddc0f42 100644
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -1385,6 +1385,7 @@ static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt)
 	case V4L2_PIX_FMT_TM6000:	descr = "A/V + VBI Mux Packet"; break;
 	case V4L2_PIX_FMT_CIT_YYVYUY:	descr = "GSPCA CIT YYVYUY"; break;
 	case V4L2_PIX_FMT_KONICA420:	descr = "GSPCA KONICA420"; break;
+	case V4L2_PIX_FMT_MM21:		descr = "Mediatek 8-bit block format"; break;
 	case V4L2_PIX_FMT_HSV24:	descr = "24-bit HSV 8-8-8"; break;
 	case V4L2_PIX_FMT_HSV32:	descr = "32-bit XHSV 8-8-8-8"; break;
 	case V4L2_SDR_FMT_CU8:		descr = "Complex U8"; break;
diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
index 311a01cc5775..db04e37da1a8 100644
--- a/include/uapi/linux/videodev2.h
+++ b/include/uapi/linux/videodev2.h
@@ -733,6 +733,7 @@ struct v4l2_pix_format {
 #define V4L2_PIX_FMT_Y12I     v4l2_fourcc('Y', '1', '2', 'I') /* Greyscale 12-bit L/R interleaved */
 #define V4L2_PIX_FMT_Z16      v4l2_fourcc('Z', '1', '6', ' ') /* Depth data 16-bit */
 #define V4L2_PIX_FMT_MT21C    v4l2_fourcc('M', 'T', '2', '1') /* Mediatek compressed block mode  */
+#define V4L2_PIX_FMT_MM21     v4l2_fourcc('M', 'M', '2', '1') /* Mediatek 8-bit block mode, two non-contiguous planes */
 #define V4L2_PIX_FMT_INZI     v4l2_fourcc('I', 'N', 'Z', 'I') /* Intel Planar Greyscale 10-bit and Depth 16-bit */
 #define V4L2_PIX_FMT_SUNXI_TILED_NV12 v4l2_fourcc('S', 'T', '1', '2') /* Sunxi Tiled NV12 Format */
 #define V4L2_PIX_FMT_CNF4     v4l2_fourcc('C', 'N', 'F', '4') /* Intel 4-bit packed depth confidence information */
-- 
2.31.1.498.g6c1eba8ee3d-goog


^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v4 05/15] media: mtk-vcodec: vdec: support stateless API
  2021-04-27 11:15 [PATCH v4 00/15] media: mtk-vcodec: support for MT8183 decoder Alexandre Courbot
                   ` (3 preceding siblings ...)
  2021-04-27 11:15 ` [PATCH v4 04/15] media: add Mediatek's MM21 format Alexandre Courbot
@ 2021-04-27 11:15 ` Alexandre Courbot
  2021-04-29  7:27   ` Hans Verkuil
  2021-04-29 12:10   ` Dafna Hirschfeld
  2021-04-27 11:15 ` [PATCH v4 06/15] media: mtk-vcodec: vdec: support stateless H.264 decoding Alexandre Courbot
                   ` (11 subsequent siblings)
  16 siblings, 2 replies; 35+ messages in thread
From: Alexandre Courbot @ 2021-04-27 11:15 UTC (permalink / raw)
  To: Tiffany Lin, Andrew-CT Chen, Rob Herring, Yunfei Dong
  Cc: Mauro Carvalho Chehab, Hans Verkuil, linux-media, linux-kernel,
	linux-mediatek, Alexandre Courbot

From: Yunfei Dong <yunfei.dong@mediatek.com>

Support the stateless codec API that will be used by MT8183.

Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
[acourbot: refactor, cleanup and split]
Co-developed-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
---
 drivers/media/platform/mtk-vcodec/Makefile    |   1 +
 .../platform/mtk-vcodec/mtk_vcodec_dec.c      |  66 +++-
 .../platform/mtk-vcodec/mtk_vcodec_dec.h      |   9 +-
 .../mtk-vcodec/mtk_vcodec_dec_stateless.c     | 370 ++++++++++++++++++
 .../platform/mtk-vcodec/mtk_vcodec_drv.h      |   3 +
 5 files changed, 446 insertions(+), 3 deletions(-)
 create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c

diff --git a/drivers/media/platform/mtk-vcodec/Makefile b/drivers/media/platform/mtk-vcodec/Makefile
index 9c3cbb5b800e..4ba93d838ab6 100644
--- a/drivers/media/platform/mtk-vcodec/Makefile
+++ b/drivers/media/platform/mtk-vcodec/Makefile
@@ -12,6 +12,7 @@ mtk-vcodec-dec-y := vdec/vdec_h264_if.o \
 		vdec_vpu_if.o \
 		mtk_vcodec_dec.o \
 		mtk_vcodec_dec_stateful.o \
+		mtk_vcodec_dec_stateless.o \
 		mtk_vcodec_dec_pm.o \
 
 mtk-vcodec-enc-y := venc/venc_vp8_if.o \
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
index 4ad2662a43b2..01c5333d6cff 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
@@ -46,6 +46,13 @@ static struct mtk_q_data *mtk_vdec_get_q_data(struct mtk_vcodec_ctx *ctx,
 static int vidioc_try_decoder_cmd(struct file *file, void *priv,
 				struct v4l2_decoder_cmd *cmd)
 {
+	struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv);
+
+	/* Use M2M stateless helper if relevant */
+	if (ctx->dev->vdec_pdata->uses_stateless_api)
+		return v4l2_m2m_ioctl_stateless_try_decoder_cmd(file, priv,
+								cmd);
+
 	switch (cmd->cmd) {
 	case V4L2_DEC_CMD_STOP:
 	case V4L2_DEC_CMD_START:
@@ -72,6 +79,10 @@ static int vidioc_decoder_cmd(struct file *file, void *priv,
 	if (ret)
 		return ret;
 
+	/* Use M2M stateless helper if relevant */
+	if (ctx->dev->vdec_pdata->uses_stateless_api)
+		return v4l2_m2m_ioctl_stateless_decoder_cmd(file, priv, cmd);
+
 	mtk_v4l2_debug(1, "decoder cmd=%u", cmd->cmd);
 	dst_vq = v4l2_m2m_get_vq(ctx->m2m_ctx,
 				V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE);
@@ -414,7 +425,8 @@ static int vidioc_vdec_s_fmt(struct file *file, void *priv,
 	 * Setting OUTPUT format after OUTPUT buffers are allocated is invalid
 	 * if using the stateful API.
 	 */
-	if ((f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) &&
+	if (!dec_pdata->uses_stateless_api &&
+	    (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) &&
 	    vb2_is_busy(&ctx->m2m_ctx->out_q_ctx.q)) {
 		mtk_v4l2_err("out_q_ctx buffers already requested");
 		ret = -EBUSY;
@@ -457,6 +469,7 @@ static int vidioc_vdec_s_fmt(struct file *file, void *priv,
 		ctx->quantization = pix_mp->quantization;
 		ctx->xfer_func = pix_mp->xfer_func;
 
+		ctx->current_codec = fmt->fourcc;
 		if (ctx->state == MTK_STATE_FREE) {
 			ret = vdec_if_init(ctx, q_data->fmt->fourcc);
 			if (ret) {
@@ -468,6 +481,49 @@ static int vidioc_vdec_s_fmt(struct file *file, void *priv,
 		}
 	}
 
+	/*
+	 * If using the stateless API, S_FMT should have the effect of setting
+	 * the CAPTURE queue resolution no matter which queue it was called on.
+	 */
+	if (dec_pdata->uses_stateless_api) {
+		ctx->picinfo.pic_w = pix_mp->width;
+		ctx->picinfo.pic_h = pix_mp->height;
+
+		ret = vdec_if_get_param(ctx, GET_PARAM_PIC_INFO, &ctx->picinfo);
+		if (ret) {
+			mtk_v4l2_err("[%d]Error!! Get GET_PARAM_PICTURE_INFO Fail",
+				ctx->id);
+			return -EINVAL;
+		}
+
+		ctx->last_decoded_picinfo = ctx->picinfo;
+
+		if (ctx->q_data[MTK_Q_DATA_DST].fmt->num_planes == 1) {
+			ctx->q_data[MTK_Q_DATA_DST].sizeimage[0] =
+				ctx->picinfo.fb_sz[0] +
+				ctx->picinfo.fb_sz[1];
+			ctx->q_data[MTK_Q_DATA_DST].bytesperline[0] =
+				ctx->picinfo.buf_w;
+		} else {
+			ctx->q_data[MTK_Q_DATA_DST].sizeimage[0] =
+				ctx->picinfo.fb_sz[0];
+			ctx->q_data[MTK_Q_DATA_DST].bytesperline[0] =
+				ctx->picinfo.buf_w;
+			ctx->q_data[MTK_Q_DATA_DST].sizeimage[1] =
+				ctx->picinfo.fb_sz[1];
+			ctx->q_data[MTK_Q_DATA_DST].bytesperline[1] =
+				ctx->picinfo.buf_w;
+		}
+
+		ctx->q_data[MTK_Q_DATA_DST].coded_width = ctx->picinfo.buf_w;
+		ctx->q_data[MTK_Q_DATA_DST].coded_height = ctx->picinfo.buf_h;
+		mtk_v4l2_debug(2, "[%d] vdec_if_init() num_plane = %d wxh=%dx%d pic wxh=%dx%d sz[0]=0x%x sz[1]=0x%x",
+			ctx->id, pix_mp->num_planes,
+			ctx->picinfo.buf_w, ctx->picinfo.buf_h,
+			ctx->picinfo.pic_w, ctx->picinfo.pic_h,
+			ctx->q_data[MTK_Q_DATA_DST].sizeimage[0],
+			ctx->q_data[MTK_Q_DATA_DST].sizeimage[1]);
+	}
 	return 0;
 }
 
@@ -765,9 +821,15 @@ void vb2ops_vdec_stop_streaming(struct vb2_queue *q)
 		while ((src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx))) {
 			struct mtk_video_dec_buf *buf_info = container_of(
 				 src_buf, struct mtk_video_dec_buf, m2m_buf.vb);
-			if (!buf_info->lastframe)
+			if (!buf_info->lastframe) {
+				struct media_request *req =
+					src_buf->vb2_buf.req_obj.req;
 				v4l2_m2m_buf_done(src_buf,
 						VB2_BUF_STATE_ERROR);
+				if (req)
+					v4l2_ctrl_request_complete(req,
+								&ctx->ctrl_hdl);
+			}
 		}
 		return;
 	}
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h
index 6a18cb3bfe07..6b29d7d9ae15 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h
@@ -45,6 +45,7 @@ struct vdec_fb {
  * @lastframe:		Intput buffer is last buffer - EOS
  * @error:		An unrecoverable error occurs on this buffer.
  * @frame_buffer:	Decode status, and buffer information of Capture buffer
+ * @bs_buffer:	Output buffer info
  *
  * Note : These status information help us track and debug buffer state
  */
@@ -55,12 +56,18 @@ struct mtk_video_dec_buf {
 	bool	queued_in_vb2;
 	bool	queued_in_v4l2;
 	bool	lastframe;
+
 	bool	error;
-	struct vdec_fb	frame_buffer;
+
+	union {
+		struct vdec_fb	frame_buffer;
+		struct mtk_vcodec_mem	bs_buffer;
+	};
 };
 
 extern const struct v4l2_ioctl_ops mtk_vdec_ioctl_ops;
 extern const struct v4l2_m2m_ops mtk_vdec_m2m_ops;
+extern const struct media_device_ops mtk_vcodec_media_ops;
 
 
 /*
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c
new file mode 100644
index 000000000000..75ddf53e2876
--- /dev/null
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c
@@ -0,0 +1,370 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "media/videobuf2-v4l2.h"
+#include <media/videobuf2-dma-contig.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-mem2mem.h>
+#include <linux/module.h>
+
+#include "mtk_vcodec_drv.h"
+#include "mtk_vcodec_dec.h"
+#include "mtk_vcodec_intr.h"
+#include "mtk_vcodec_util.h"
+#include "vdec_drv_if.h"
+#include "mtk_vcodec_dec_pm.h"
+
+/**
+ * struct mtk_stateless_control  - CID control type
+ * @cfg: control configuration
+ * @codec_type: codec type (V4L2 pixel format) for CID control type
+ */
+struct mtk_stateless_control {
+	struct v4l2_ctrl_config cfg;
+	int codec_type;
+};
+
+static const struct mtk_stateless_control mtk_stateless_controls[] = {
+	{
+		.cfg = {
+			.id = V4L2_CID_STATELESS_H264_SPS,
+		},
+		.codec_type = V4L2_PIX_FMT_H264_SLICE,
+	},
+	{
+		.cfg = {
+			.id = V4L2_CID_STATELESS_H264_PPS,
+		},
+		.codec_type = V4L2_PIX_FMT_H264_SLICE,
+	},
+	{
+		.cfg = {
+			.id = V4L2_CID_STATELESS_H264_SCALING_MATRIX,
+		},
+		.codec_type = V4L2_PIX_FMT_H264_SLICE,
+	},
+	{
+		.cfg = {
+			.id = V4L2_CID_STATELESS_H264_DECODE_PARAMS,
+		},
+		.codec_type = V4L2_PIX_FMT_H264_SLICE,
+	},
+	{
+		.cfg = {
+			.id = V4L2_CID_MPEG_VIDEO_H264_PROFILE,
+			.def = V4L2_MPEG_VIDEO_H264_PROFILE_MAIN,
+			.max = V4L2_MPEG_VIDEO_H264_PROFILE_HIGH,
+			.menu_skip_mask =
+				BIT(V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE) |
+				BIT(V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED),
+		},
+		.codec_type = V4L2_PIX_FMT_H264_SLICE,
+	},
+	{
+		.cfg = {
+			.id = V4L2_CID_STATELESS_H264_DECODE_MODE,
+			.min = V4L2_STATELESS_H264_DECODE_MODE_FRAME_BASED,
+			.def = V4L2_STATELESS_H264_DECODE_MODE_FRAME_BASED,
+			.max = V4L2_STATELESS_H264_DECODE_MODE_FRAME_BASED,
+		},
+		.codec_type = V4L2_PIX_FMT_H264_SLICE,
+	},
+	{
+		.cfg = {
+			.id = V4L2_CID_STATELESS_H264_START_CODE,
+			.min = V4L2_STATELESS_H264_START_CODE_ANNEX_B,
+			.def = V4L2_STATELESS_H264_START_CODE_ANNEX_B,
+			.max = V4L2_STATELESS_H264_START_CODE_ANNEX_B,
+		},
+		.codec_type = V4L2_PIX_FMT_H264_SLICE,
+	}
+};
+#define NUM_CTRLS ARRAY_SIZE(mtk_stateless_controls)
+
+static const struct mtk_video_fmt mtk_video_formats[] = {
+	{
+		.fourcc = V4L2_PIX_FMT_H264_SLICE,
+		.type = MTK_FMT_DEC,
+		.num_planes = 1,
+	},
+	{
+		.fourcc = V4L2_PIX_FMT_MM21,
+		.type = MTK_FMT_FRAME,
+		.num_planes = 2,
+	},
+};
+#define NUM_FORMATS ARRAY_SIZE(mtk_video_formats)
+#define DEFAULT_OUT_FMT_IDX    0
+#define DEFAULT_CAP_FMT_IDX    1
+
+static const struct mtk_codec_framesizes mtk_vdec_framesizes[] = {
+	{
+		.fourcc	= V4L2_PIX_FMT_H264_SLICE,
+		.stepwise = {  MTK_VDEC_MIN_W, MTK_VDEC_MAX_W, 16,
+				MTK_VDEC_MIN_H, MTK_VDEC_MAX_H, 16 },
+	},
+};
+
+#define NUM_SUPPORTED_FRAMESIZE ARRAY_SIZE(mtk_vdec_framesizes)
+
+static void mtk_vdec_stateless_set_dst_payload(struct mtk_vcodec_ctx *ctx,
+					       struct vdec_fb *fb)
+{
+	struct mtk_video_dec_buf *vdec_frame_buf =
+		container_of(fb, struct mtk_video_dec_buf, frame_buffer);
+	struct vb2_v4l2_buffer *vb = &vdec_frame_buf->m2m_buf.vb;
+	unsigned int cap_y_size = ctx->q_data[MTK_Q_DATA_DST].sizeimage[0];
+
+	vb2_set_plane_payload(&vb->vb2_buf, 0, cap_y_size);
+	if (ctx->q_data[MTK_Q_DATA_DST].fmt->num_planes == 2) {
+		unsigned int cap_c_size =
+			ctx->q_data[MTK_Q_DATA_DST].sizeimage[1];
+
+		vb2_set_plane_payload(&vb->vb2_buf, 1, cap_c_size);
+	}
+}
+
+static struct vdec_fb *vdec_get_cap_buffer(struct mtk_vcodec_ctx *ctx,
+					   struct vb2_v4l2_buffer *vb2_v4l2)
+{
+	struct mtk_video_dec_buf *framebuf =
+		container_of(vb2_v4l2, struct mtk_video_dec_buf, m2m_buf.vb);
+	struct vdec_fb *pfb = &framebuf->frame_buffer;
+	struct vb2_buffer *dst_buf = &vb2_v4l2->vb2_buf;
+
+	pfb = &framebuf->frame_buffer;
+	pfb->base_y.va = NULL;
+	pfb->base_y.dma_addr = vb2_dma_contig_plane_dma_addr(dst_buf, 0);
+	pfb->base_y.size = ctx->q_data[MTK_Q_DATA_DST].sizeimage[0];
+
+	if (ctx->q_data[MTK_Q_DATA_DST].fmt->num_planes == 2) {
+		pfb->base_c.va = NULL;
+		pfb->base_c.dma_addr =
+			vb2_dma_contig_plane_dma_addr(dst_buf, 1);
+		pfb->base_c.size = ctx->q_data[MTK_Q_DATA_DST].sizeimage[1];
+	}
+	mtk_v4l2_debug(1,
+		"id=%d Framebuf  pfb=%p VA=%p Y_DMA=%pad C_DMA=%pad Size=%zx frame_count = %d",
+		dst_buf->index, pfb,
+		pfb->base_y.va, &pfb->base_y.dma_addr,
+		&pfb->base_c.dma_addr, pfb->base_y.size,
+		ctx->decoded_frame_cnt);
+
+	return pfb;
+}
+
+static void vb2ops_vdec_buf_request_complete(struct vb2_buffer *vb)
+{
+	struct mtk_vcodec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
+
+	v4l2_ctrl_request_complete(vb->req_obj.req, &ctx->ctrl_hdl);
+}
+
+static int fops_media_request_validate(struct media_request *mreq)
+{
+	const unsigned int buffer_cnt = vb2_request_buffer_cnt(mreq);
+
+	switch (buffer_cnt) {
+	case 1:
+		/* We expect exactly one buffer with the request */
+		break;
+	case 0:
+		mtk_v4l2_err("No buffer provided with the request");
+		return -ENOENT;
+	default:
+		mtk_v4l2_err("Too many buffers (%d) provided with the request",
+			     buffer_cnt);
+		return -EINVAL;
+	}
+
+	return vb2_request_validate(mreq);
+}
+
+static void mtk_vdec_worker(struct work_struct *work)
+{
+	struct mtk_vcodec_ctx *ctx =
+		container_of(work, struct mtk_vcodec_ctx, decode_work);
+	struct mtk_vcodec_dev *dev = ctx->dev;
+	struct vb2_v4l2_buffer *vb2_v4l2_src, *vb2_v4l2_dst;
+	struct vb2_buffer *vb2_src;
+	struct mtk_vcodec_mem *bs_src;
+	struct mtk_video_dec_buf *dec_buf_src;
+	struct media_request *src_buf_req;
+	struct vdec_fb *dst_buf;
+	bool res_chg = false;
+	int ret;
+
+	vb2_v4l2_src = v4l2_m2m_next_src_buf(ctx->m2m_ctx);
+	if (vb2_v4l2_src == NULL) {
+		v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx);
+		mtk_v4l2_debug(1, "[%d] no available source buffer", ctx->id);
+		return;
+	}
+
+	vb2_v4l2_dst = v4l2_m2m_next_dst_buf(ctx->m2m_ctx);
+	if (vb2_v4l2_dst == NULL) {
+		v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx);
+		mtk_v4l2_debug(1, "[%d] no available destination buffer", ctx->id);
+		return;
+	}
+
+	vb2_src = &vb2_v4l2_src->vb2_buf;
+	dec_buf_src = container_of(vb2_v4l2_src, struct mtk_video_dec_buf,
+				   m2m_buf.vb);
+	bs_src = &dec_buf_src->bs_buffer;
+
+	mtk_v4l2_debug(3, "[%d] (%d) id=%d, vb=%p buf_info = %p",
+			ctx->id, src_buf->vb2_queue->type,
+			src_buf->index, src_buf, src_buf_info);
+
+	bs_src->va = NULL;
+	bs_src->dma_addr = vb2_dma_contig_plane_dma_addr(vb2_src, 0);
+	bs_src->size = (size_t)vb2_src->planes[0].bytesused;
+
+	mtk_v4l2_debug(3, "[%d] Bitstream VA=%p DMA=%pad Size=%zx vb=%p",
+			ctx->id, buf->va, &buf->dma_addr, buf->size, src_buf);
+	/* Apply request controls. */
+	src_buf_req = vb2_src->req_obj.req;
+	if (src_buf_req)
+		v4l2_ctrl_request_setup(src_buf_req, &ctx->ctrl_hdl);
+	else
+		mtk_v4l2_err("vb2 buffer media request is NULL");
+
+	dst_buf = vdec_get_cap_buffer(ctx, vb2_v4l2_dst);
+	v4l2_m2m_buf_copy_metadata(vb2_v4l2_src, vb2_v4l2_dst, true);
+	ret = vdec_if_decode(ctx, bs_src, dst_buf, &res_chg);
+	if (ret) {
+		mtk_v4l2_err(
+			" <===[%d], src_buf[%d] sz=0x%zx pts=%llu vdec_if_decode() ret=%d res_chg=%d===>",
+			ctx->id, vb2_src->index, bs_src->size,
+			vb2_src->timestamp, ret, res_chg);
+		if (ret == -EIO) {
+			mutex_lock(&ctx->lock);
+			dec_buf_src->error = true;
+			mutex_unlock(&ctx->lock);
+		}
+	}
+
+	mtk_vdec_stateless_set_dst_payload(ctx, dst_buf);
+
+	v4l2_m2m_buf_done_and_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx,
+		ret ? VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
+
+	v4l2_ctrl_request_complete(src_buf_req, &ctx->ctrl_hdl);
+}
+
+static void vb2ops_vdec_stateless_buf_queue(struct vb2_buffer *vb)
+{
+	struct mtk_vcodec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
+	struct vb2_v4l2_buffer *vb2_v4l2 = to_vb2_v4l2_buffer(vb);
+
+	mtk_v4l2_debug(3, "[%d] (%d) id=%d, vb=%p",
+			ctx->id, vb->vb2_queue->type,
+			vb->index, vb);
+
+	mutex_lock(&ctx->lock);
+	v4l2_m2m_buf_queue(ctx->m2m_ctx, vb2_v4l2);
+	mutex_unlock(&ctx->lock);
+	if (vb->vb2_queue->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
+		return;
+
+	mtk_v4l2_debug(3, "(%d) id=%d, bs=%p",
+		vb->vb2_queue->type, vb->index, src_buf);
+
+	/* If an OUTPUT buffer, we may need to update the state */
+	if (ctx->state == MTK_STATE_INIT) {
+		ctx->state = MTK_STATE_HEADER;
+		mtk_v4l2_debug(1, "Init driver from init to header.");
+	} else {
+		mtk_v4l2_debug(3, "[%d] already init driver %d",
+				ctx->id, ctx->state);
+	}
+}
+
+static int mtk_vdec_flush_decoder(struct mtk_vcodec_ctx *ctx)
+{
+	bool res_chg;
+
+	return vdec_if_decode(ctx, NULL, NULL, &res_chg);
+}
+
+static int mtk_vcodec_dec_ctrls_setup(struct mtk_vcodec_ctx *ctx)
+{
+	unsigned int i;
+
+	v4l2_ctrl_handler_init(&ctx->ctrl_hdl, NUM_CTRLS);
+	if (ctx->ctrl_hdl.error) {
+		mtk_v4l2_err("v4l2_ctrl_handler_init failed\n");
+		return ctx->ctrl_hdl.error;
+	}
+
+	for (i = 0; i < NUM_CTRLS; i++) {
+		struct v4l2_ctrl_config cfg = mtk_stateless_controls[i].cfg;
+
+		v4l2_ctrl_new_custom(&ctx->ctrl_hdl, &cfg, NULL);
+		if (ctx->ctrl_hdl.error) {
+			mtk_v4l2_err("Adding control %d failed %d",
+					i, ctx->ctrl_hdl.error);
+			return ctx->ctrl_hdl.error;
+		}
+	}
+
+	v4l2_ctrl_handler_setup(&ctx->ctrl_hdl);
+
+	return 0;
+}
+
+const struct media_device_ops mtk_vcodec_media_ops = {
+	.req_validate	= fops_media_request_validate,
+	.req_queue	= v4l2_m2m_request_queue,
+};
+
+static void mtk_init_vdec_params(struct mtk_vcodec_ctx *ctx)
+{
+	struct vb2_queue *src_vq;
+
+	src_vq = v4l2_m2m_get_vq(ctx->m2m_ctx,
+				 V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE);
+
+	/* Support request api for output plane */
+	src_vq->supports_requests = true;
+	src_vq->requires_requests = true;
+}
+
+static int vb2ops_vdec_out_buf_validate(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+
+	vbuf->field = V4L2_FIELD_NONE;
+	return 0;
+}
+
+static struct vb2_ops mtk_vdec_request_vb2_ops = {
+	.queue_setup	= vb2ops_vdec_queue_setup,
+	.buf_prepare	= vb2ops_vdec_buf_prepare,
+	.wait_prepare	= vb2_ops_wait_prepare,
+	.wait_finish	= vb2_ops_wait_finish,
+	.start_streaming	= vb2ops_vdec_start_streaming,
+
+	.buf_queue	= vb2ops_vdec_stateless_buf_queue,
+	.buf_out_validate = vb2ops_vdec_out_buf_validate,
+	.buf_init	= vb2ops_vdec_buf_init,
+	.buf_finish	= vb2ops_vdec_buf_finish,
+	.stop_streaming	= vb2ops_vdec_stop_streaming,
+	.buf_request_complete = vb2ops_vdec_buf_request_complete,
+};
+
+const struct mtk_vcodec_dec_pdata mtk_vdec_8183_pdata = {
+	.chip = MTK_MT8183,
+	.init_vdec_params = mtk_init_vdec_params,
+	.ctrls_setup = mtk_vcodec_dec_ctrls_setup,
+	.vdec_vb2_ops = &mtk_vdec_request_vb2_ops,
+	.vdec_formats = mtk_video_formats,
+	.num_formats = NUM_FORMATS,
+	.default_out_fmt = &mtk_video_formats[DEFAULT_OUT_FMT_IDX],
+	.default_cap_fmt = &mtk_video_formats[DEFAULT_CAP_FMT_IDX],
+	.vdec_framesizes = mtk_vdec_framesizes,
+	.num_framesizes = NUM_SUPPORTED_FRAMESIZE,
+	.uses_stateless_api = true,
+	.worker = mtk_vdec_worker,
+	.flush_decoder = mtk_vdec_flush_decoder,
+};
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
index e5b8309785e1..78d4a7728ddf 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
@@ -250,6 +250,7 @@ struct vdec_pic_info {
  * @encode_work: worker for the encoding
  * @last_decoded_picinfo: pic information get from latest decode
  * @empty_flush_buf: a fake size-0 capture buffer that indicates flush
+ * @current_codec: current set input codec, in V4L2 pixel format
  *
  * @colorspace: enum v4l2_colorspace; supplemental to pixelformat
  * @ycbcr_enc: enum v4l2_ycbcr_encoding, Y'CbCr encoding
@@ -289,6 +290,8 @@ struct mtk_vcodec_ctx {
 	struct vdec_pic_info last_decoded_picinfo;
 	struct mtk_video_dec_buf *empty_flush_buf;
 
+	u32 current_codec;
+
 	enum v4l2_colorspace colorspace;
 	enum v4l2_ycbcr_encoding ycbcr_enc;
 	enum v4l2_quantization quantization;
-- 
2.31.1.498.g6c1eba8ee3d-goog


^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v4 06/15] media: mtk-vcodec: vdec: support stateless H.264 decoding
  2021-04-27 11:15 [PATCH v4 00/15] media: mtk-vcodec: support for MT8183 decoder Alexandre Courbot
                   ` (4 preceding siblings ...)
  2021-04-27 11:15 ` [PATCH v4 05/15] media: mtk-vcodec: vdec: support stateless API Alexandre Courbot
@ 2021-04-27 11:15 ` Alexandre Courbot
  2021-04-27 11:15 ` [PATCH v4 07/15] media: mtk-vcodec: vdec: add media device if using stateless api Alexandre Courbot
                   ` (10 subsequent siblings)
  16 siblings, 0 replies; 35+ messages in thread
From: Alexandre Courbot @ 2021-04-27 11:15 UTC (permalink / raw)
  To: Tiffany Lin, Andrew-CT Chen, Rob Herring, Yunfei Dong
  Cc: Mauro Carvalho Chehab, Hans Verkuil, linux-media, linux-kernel,
	linux-mediatek, Alexandre Courbot

From: Yunfei Dong <yunfei.dong@mediatek.com>

Add support for H.264 decoding using the stateless API, as supported by
MT8183. This support takes advantage of the V4L2 H.264 reference list
builders.

Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
[acourbot: refactor, cleanup and split]
Co-developed-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
---
 drivers/media/platform/Kconfig                |   1 +
 drivers/media/platform/mtk-vcodec/Makefile    |   1 +
 .../mtk-vcodec/vdec/vdec_h264_req_if.c        | 780 ++++++++++++++++++
 .../media/platform/mtk-vcodec/vdec_drv_if.c   |   3 +
 .../media/platform/mtk-vcodec/vdec_drv_if.h   |   1 +
 5 files changed, 786 insertions(+)
 create mode 100644 drivers/media/platform/mtk-vcodec/vdec/vdec_h264_req_if.c

diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index 157c924686e4..ae1468aa1b4e 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -314,6 +314,7 @@ config VIDEO_MEDIATEK_VCODEC
 	select V4L2_MEM2MEM_DEV
 	select VIDEO_MEDIATEK_VCODEC_VPU if VIDEO_MEDIATEK_VPU
 	select VIDEO_MEDIATEK_VCODEC_SCP if MTK_SCP
+	select V4L2_H264
 	help
 	  Mediatek video codec driver provides HW capability to
 	  encode and decode in a range of video formats on MT8173
diff --git a/drivers/media/platform/mtk-vcodec/Makefile b/drivers/media/platform/mtk-vcodec/Makefile
index 4ba93d838ab6..ca8e9e7a9c4e 100644
--- a/drivers/media/platform/mtk-vcodec/Makefile
+++ b/drivers/media/platform/mtk-vcodec/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_VIDEO_MEDIATEK_VCODEC) += mtk-vcodec-dec.o \
 mtk-vcodec-dec-y := vdec/vdec_h264_if.o \
 		vdec/vdec_vp8_if.o \
 		vdec/vdec_vp9_if.o \
+		vdec/vdec_h264_req_if.o \
 		mtk_vcodec_dec_drv.o \
 		vdec_drv_if.o \
 		vdec_vpu_if.o \
diff --git a/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_req_if.c b/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_req_if.c
new file mode 100644
index 000000000000..8ec8da469ef3
--- /dev/null
+++ b/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_req_if.c
@@ -0,0 +1,780 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <media/v4l2-mem2mem.h>
+#include <media/v4l2-h264.h>
+#include <media/videobuf2-dma-contig.h>
+
+#include "../vdec_drv_if.h"
+#include "../mtk_vcodec_util.h"
+#include "../mtk_vcodec_dec.h"
+#include "../mtk_vcodec_intr.h"
+#include "../vdec_vpu_if.h"
+#include "../vdec_drv_base.h"
+
+#define BUF_PREDICTION_SZ			(64 * 4096)
+#define MB_UNIT_LEN				16
+
+/* get used parameters for sps/pps */
+#define GET_MTK_VDEC_FLAG(cond, flag) \
+	{ dst_param->cond = ((src_param->flags & flag) ? (1) : (0)); }
+#define GET_MTK_VDEC_PARAM(param) \
+	{ dst_param->param = src_param->param; }
+/* motion vector size (bytes) for every macro block */
+#define HW_MB_STORE_SZ				64
+
+#define H264_MAX_FB_NUM				17
+#define H264_MAX_MV_NUM				32
+#define HDR_PARSING_BUF_SZ			1024
+
+/**
+ * struct mtk_h264_dpb_info  - h264 dpb information
+ * @y_dma_addr: Y bitstream physical address
+ * @c_dma_addr: CbCr bitstream physical address
+ * @reference_flag: reference picture flag (short/long term reference picture)
+ * @field: field picture flag
+ */
+struct mtk_h264_dpb_info {
+	dma_addr_t y_dma_addr;
+	dma_addr_t c_dma_addr;
+	int reference_flag;
+	int field;
+};
+
+/**
+ * struct mtk_h264_sps_param  - parameters for sps
+ */
+struct mtk_h264_sps_param {
+	unsigned char chroma_format_idc;
+	unsigned char bit_depth_luma_minus8;
+	unsigned char bit_depth_chroma_minus8;
+	unsigned char log2_max_frame_num_minus4;
+	unsigned char pic_order_cnt_type;
+	unsigned char log2_max_pic_order_cnt_lsb_minus4;
+	unsigned char max_num_ref_frames;
+	unsigned char separate_colour_plane_flag;
+	unsigned short pic_width_in_mbs_minus1;
+	unsigned short pic_height_in_map_units_minus1;
+	unsigned int max_frame_nums;
+	unsigned char qpprime_y_zero_transform_bypass_flag;
+	unsigned char delta_pic_order_always_zero_flag;
+	unsigned char frame_mbs_only_flag;
+	unsigned char mb_adaptive_frame_field_flag;
+	unsigned char direct_8x8_inference_flag;
+	unsigned char reserved[3];
+};
+
+/**
+ * struct mtk_h264_pps_param  - parameters for pps
+ */
+struct mtk_h264_pps_param {
+	unsigned char num_ref_idx_l0_default_active_minus1;
+	unsigned char num_ref_idx_l1_default_active_minus1;
+	unsigned char weighted_bipred_idc;
+	char pic_init_qp_minus26;
+	char chroma_qp_index_offset;
+	char second_chroma_qp_index_offset;
+	unsigned char entropy_coding_mode_flag;
+	unsigned char pic_order_present_flag;
+	unsigned char deblocking_filter_control_present_flag;
+	unsigned char constrained_intra_pred_flag;
+	unsigned char weighted_pred_flag;
+	unsigned char redundant_pic_cnt_present_flag;
+	unsigned char transform_8x8_mode_flag;
+	unsigned char scaling_matrix_present_flag;
+	unsigned char reserved[2];
+};
+
+struct slice_api_h264_scaling_matrix {
+	unsigned char scaling_list_4x4[6][16];
+	unsigned char scaling_list_8x8[6][64];
+};
+
+struct slice_h264_dpb_entry {
+	unsigned long long reference_ts;
+	unsigned short frame_num;
+	unsigned short pic_num;
+	/* Note that field is indicated by v4l2_buffer.field */
+	int top_field_order_cnt;
+	int bottom_field_order_cnt;
+	unsigned int flags; /* V4L2_H264_DPB_ENTRY_FLAG_* */
+};
+
+/**
+ * struct slice_api_h264_decode_param - parameters for decode.
+ */
+struct slice_api_h264_decode_param {
+	struct slice_h264_dpb_entry dpb[16];
+	unsigned short num_slices;
+	unsigned short nal_ref_idc;
+	unsigned char ref_pic_list_p0[32];
+	unsigned char ref_pic_list_b0[32];
+	unsigned char ref_pic_list_b1[32];
+	int top_field_order_cnt;
+	int bottom_field_order_cnt;
+	unsigned int flags; /* V4L2_H264_DECODE_PARAM_FLAG_* */
+};
+
+/**
+ * struct mtk_h264_dec_slice_param  - parameters for decode current frame
+ */
+struct mtk_h264_dec_slice_param {
+	struct mtk_h264_sps_param			sps;
+	struct mtk_h264_pps_param			pps;
+	struct slice_api_h264_scaling_matrix		scaling_matrix;
+	struct slice_api_h264_decode_param		decode_params;
+	struct mtk_h264_dpb_info h264_dpb_info[16];
+};
+
+/**
+ * struct h264_fb - h264 decode frame buffer information
+ * @vdec_fb_va  : virtual address of struct vdec_fb
+ * @y_fb_dma    : dma address of Y frame buffer (luma)
+ * @c_fb_dma    : dma address of C frame buffer (chroma)
+ * @poc         : picture order count of frame buffer
+ * @reserved    : for 8 bytes alignment
+ */
+struct h264_fb {
+	uint64_t vdec_fb_va;
+	uint64_t y_fb_dma;
+	uint64_t c_fb_dma;
+	int32_t poc;
+	uint32_t reserved;
+};
+
+/**
+ * struct vdec_h264_dec_info - decode information
+ * @dpb_sz		: decoding picture buffer size
+ * @resolution_changed  : resoltion change happen
+ * @realloc_mv_buf	: flag to notify driver to re-allocate mv buffer
+ * @cap_num_planes	: number planes of capture buffer
+ * @bs_dma		: Input bit-stream buffer dma address
+ * @y_fb_dma		: Y frame buffer dma address
+ * @c_fb_dma		: C frame buffer dma address
+ * @vdec_fb_va		: VDEC frame buffer struct virtual address
+ */
+struct vdec_h264_dec_info {
+	uint32_t dpb_sz;
+	uint32_t resolution_changed;
+	uint32_t realloc_mv_buf;
+	uint32_t cap_num_planes;
+	uint64_t bs_dma;
+	uint64_t y_fb_dma;
+	uint64_t c_fb_dma;
+	uint64_t vdec_fb_va;
+};
+
+/**
+ * struct vdec_h264_vsi - shared memory for decode information exchange
+ *                        between VPU and Host.
+ *                        The memory is allocated by VPU then mapping to Host
+ *                        in vpu_dec_init() and freed in vpu_dec_deinit()
+ *                        by VPU.
+ *                        AP-W/R : AP is writer/reader on this item
+ *                        VPU-W/R: VPU is write/reader on this item
+ * @pred_buf_dma : HW working predication buffer dma address (AP-W, VPU-R)
+ * @mv_buf_dma   : HW working motion vector buffer dma address (AP-W, VPU-R)
+ * @dec          : decode information (AP-R, VPU-W)
+ * @pic          : picture information (AP-R, VPU-W)
+ * @crop         : crop information (AP-R, VPU-W)
+ */
+struct vdec_h264_vsi {
+	uint64_t pred_buf_dma;
+	uint64_t mv_buf_dma[H264_MAX_MV_NUM];
+	struct vdec_h264_dec_info dec;
+	struct vdec_pic_info pic;
+	struct v4l2_rect crop;
+	struct mtk_h264_dec_slice_param h264_slice_params;
+};
+
+/**
+ * struct vdec_h264_slice_inst - h264 decoder instance
+ * @num_nalu : how many nalus be decoded
+ * @ctx      : point to mtk_vcodec_ctx
+ * @pred_buf : HW working predication buffer
+ * @mv_buf   : HW working motion vector buffer
+ * @vpu      : VPU instance
+ * @vsi_ctx  : Local VSI data for this decoding context
+ */
+struct vdec_h264_slice_inst {
+	unsigned int num_nalu;
+	struct mtk_vcodec_ctx *ctx;
+	struct mtk_vcodec_mem pred_buf;
+	struct mtk_vcodec_mem mv_buf[H264_MAX_MV_NUM];
+	struct vdec_vpu_inst vpu;
+	struct vdec_h264_vsi vsi_ctx;
+	struct mtk_h264_dec_slice_param h264_slice_param;
+
+	struct v4l2_h264_dpb_entry dpb[16];
+};
+
+static void *get_ctrl_ptr(struct mtk_vcodec_ctx *ctx,
+				 int id)
+{
+	struct v4l2_ctrl *ctrl = v4l2_ctrl_find(&ctx->ctrl_hdl, id);
+
+	return ctrl->p_cur.p;
+}
+
+static void get_h264_dpb_list(struct vdec_h264_slice_inst *inst,
+			      struct mtk_h264_dec_slice_param *slice_param)
+{
+	struct vb2_queue *vq;
+	struct vb2_buffer *vb;
+	struct vb2_v4l2_buffer *vb2_v4l2;
+	u64 index;
+
+	vq = v4l2_m2m_get_vq(inst->ctx->m2m_ctx,
+		V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE);
+
+	for (index = 0; index < ARRAY_SIZE(slice_param->decode_params.dpb); index++) {
+		const struct slice_h264_dpb_entry *dpb;
+		int vb2_index;
+
+		dpb = &slice_param->decode_params.dpb[index];
+		if (!(dpb->flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE)) {
+			slice_param->h264_dpb_info[index].reference_flag = 0;
+			continue;
+		}
+
+		vb2_index = vb2_find_timestamp(vq, dpb->reference_ts, 0);
+		if (vb2_index < 0) {
+			mtk_vcodec_err(inst, "Reference invalid: dpb_index(%lld) reference_ts(%lld)",
+				index, dpb->reference_ts);
+			continue;
+		}
+		/* 1 for short term reference, 2 for long term reference */
+		if (!(dpb->flags & V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM))
+			slice_param->h264_dpb_info[index].reference_flag = 1;
+		else
+			slice_param->h264_dpb_info[index].reference_flag = 2;
+
+		vb = vq->bufs[vb2_index];
+		vb2_v4l2 = container_of(vb, struct vb2_v4l2_buffer, vb2_buf);
+		slice_param->h264_dpb_info[index].field = vb2_v4l2->field;
+
+		slice_param->h264_dpb_info[index].y_dma_addr =
+			vb2_dma_contig_plane_dma_addr(vb, 0);
+		if (inst->ctx->q_data[MTK_Q_DATA_DST].fmt->num_planes == 2) {
+			slice_param->h264_dpb_info[index].c_dma_addr =
+				vb2_dma_contig_plane_dma_addr(vb, 1);
+		}
+	}
+}
+
+static void get_h264_sps_parameters(struct mtk_h264_sps_param *dst_param,
+	const struct v4l2_ctrl_h264_sps *src_param)
+{
+	GET_MTK_VDEC_PARAM(chroma_format_idc);
+	GET_MTK_VDEC_PARAM(bit_depth_luma_minus8);
+	GET_MTK_VDEC_PARAM(bit_depth_chroma_minus8);
+	GET_MTK_VDEC_PARAM(log2_max_frame_num_minus4);
+	GET_MTK_VDEC_PARAM(pic_order_cnt_type);
+	GET_MTK_VDEC_PARAM(log2_max_pic_order_cnt_lsb_minus4);
+	GET_MTK_VDEC_PARAM(max_num_ref_frames);
+	GET_MTK_VDEC_PARAM(pic_width_in_mbs_minus1);
+	GET_MTK_VDEC_PARAM(pic_height_in_map_units_minus1);
+
+	GET_MTK_VDEC_FLAG(separate_colour_plane_flag,
+		V4L2_H264_SPS_FLAG_SEPARATE_COLOUR_PLANE);
+	GET_MTK_VDEC_FLAG(qpprime_y_zero_transform_bypass_flag,
+		V4L2_H264_SPS_FLAG_QPPRIME_Y_ZERO_TRANSFORM_BYPASS);
+	GET_MTK_VDEC_FLAG(delta_pic_order_always_zero_flag,
+		V4L2_H264_SPS_FLAG_DELTA_PIC_ORDER_ALWAYS_ZERO);
+	GET_MTK_VDEC_FLAG(frame_mbs_only_flag,
+		V4L2_H264_SPS_FLAG_FRAME_MBS_ONLY);
+	GET_MTK_VDEC_FLAG(mb_adaptive_frame_field_flag,
+		V4L2_H264_SPS_FLAG_MB_ADAPTIVE_FRAME_FIELD);
+	GET_MTK_VDEC_FLAG(direct_8x8_inference_flag,
+		V4L2_H264_SPS_FLAG_DIRECT_8X8_INFERENCE);
+}
+
+static void get_h264_pps_parameters(struct mtk_h264_pps_param *dst_param,
+	const struct v4l2_ctrl_h264_pps *src_param)
+{
+	GET_MTK_VDEC_PARAM(num_ref_idx_l0_default_active_minus1);
+	GET_MTK_VDEC_PARAM(num_ref_idx_l1_default_active_minus1);
+	GET_MTK_VDEC_PARAM(weighted_bipred_idc);
+	GET_MTK_VDEC_PARAM(pic_init_qp_minus26);
+	GET_MTK_VDEC_PARAM(chroma_qp_index_offset);
+	GET_MTK_VDEC_PARAM(second_chroma_qp_index_offset);
+
+	GET_MTK_VDEC_FLAG(entropy_coding_mode_flag,
+		V4L2_H264_PPS_FLAG_ENTROPY_CODING_MODE);
+	GET_MTK_VDEC_FLAG(pic_order_present_flag,
+		V4L2_H264_PPS_FLAG_BOTTOM_FIELD_PIC_ORDER_IN_FRAME_PRESENT);
+	GET_MTK_VDEC_FLAG(weighted_pred_flag,
+		V4L2_H264_PPS_FLAG_WEIGHTED_PRED);
+	GET_MTK_VDEC_FLAG(deblocking_filter_control_present_flag,
+		V4L2_H264_PPS_FLAG_DEBLOCKING_FILTER_CONTROL_PRESENT);
+	GET_MTK_VDEC_FLAG(constrained_intra_pred_flag,
+		V4L2_H264_PPS_FLAG_CONSTRAINED_INTRA_PRED);
+	GET_MTK_VDEC_FLAG(redundant_pic_cnt_present_flag,
+		V4L2_H264_PPS_FLAG_REDUNDANT_PIC_CNT_PRESENT);
+	GET_MTK_VDEC_FLAG(transform_8x8_mode_flag,
+		V4L2_H264_PPS_FLAG_TRANSFORM_8X8_MODE);
+	GET_MTK_VDEC_FLAG(scaling_matrix_present_flag,
+		V4L2_H264_PPS_FLAG_SCALING_MATRIX_PRESENT);
+}
+
+static void
+get_h264_scaling_matrix(struct slice_api_h264_scaling_matrix *dst_matrix,
+			const struct v4l2_ctrl_h264_scaling_matrix *src_matrix)
+{
+	memcpy(dst_matrix->scaling_list_4x4, src_matrix->scaling_list_4x4,
+	       sizeof(dst_matrix->scaling_list_4x4));
+
+	memcpy(dst_matrix->scaling_list_8x8, src_matrix->scaling_list_8x8,
+	       sizeof(dst_matrix->scaling_list_8x8));
+}
+
+static void get_h264_decode_parameters(
+	struct slice_api_h264_decode_param *dst_params,
+	const struct v4l2_ctrl_h264_decode_params *src_params,
+	const struct v4l2_h264_dpb_entry dpb[V4L2_H264_NUM_DPB_ENTRIES])
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(dst_params->dpb); i++) {
+		struct slice_h264_dpb_entry *dst_entry = &dst_params->dpb[i];
+		const struct v4l2_h264_dpb_entry *src_entry = &dpb[i];
+
+		dst_entry->reference_ts = src_entry->reference_ts;
+		dst_entry->frame_num = src_entry->frame_num;
+		dst_entry->pic_num = src_entry->pic_num;
+		dst_entry->top_field_order_cnt = src_entry->top_field_order_cnt;
+		dst_entry->bottom_field_order_cnt =
+			src_entry->bottom_field_order_cnt;
+		dst_entry->flags = src_entry->flags;
+	}
+
+	/*
+	 * num_slices is a leftover from the old H.264 support and is ignored
+	 * by the firmware.
+	 */
+	dst_params->num_slices = 0;
+	dst_params->nal_ref_idc = src_params->nal_ref_idc;
+	dst_params->top_field_order_cnt = src_params->top_field_order_cnt;
+	dst_params->bottom_field_order_cnt = src_params->bottom_field_order_cnt;
+	dst_params->flags = src_params->flags;
+}
+
+static bool dpb_entry_match(const struct v4l2_h264_dpb_entry *a,
+			    const struct v4l2_h264_dpb_entry *b)
+{
+	return a->top_field_order_cnt == b->top_field_order_cnt &&
+	       a->bottom_field_order_cnt == b->bottom_field_order_cnt;
+}
+
+/*
+ * Move DPB entries of dec_param that refer to a frame already existing in dpb
+ * into the already existing slot in dpb, and move other entries into new slots.
+ *
+ * This function is an adaptation of the similarly-named function in
+ * hantro_h264.c.
+ */
+static void update_dpb(const struct v4l2_ctrl_h264_decode_params *dec_param,
+		       struct v4l2_h264_dpb_entry *dpb)
+{
+	DECLARE_BITMAP(new, ARRAY_SIZE(dec_param->dpb)) = { 0, };
+	DECLARE_BITMAP(in_use, ARRAY_SIZE(dec_param->dpb)) = { 0, };
+	DECLARE_BITMAP(used, ARRAY_SIZE(dec_param->dpb)) = { 0, };
+	unsigned int i, j;
+
+	/* Disable all entries by default, and mark the ones in use. */
+	for (i = 0; i < ARRAY_SIZE(dec_param->dpb); i++) {
+		if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE)
+			set_bit(i, in_use);
+		dpb[i].flags &= ~V4L2_H264_DPB_ENTRY_FLAG_ACTIVE;
+	}
+
+	/* Try to match new DPB entries with existing ones by their POCs. */
+	for (i = 0; i < ARRAY_SIZE(dec_param->dpb); i++) {
+		const struct v4l2_h264_dpb_entry *ndpb = &dec_param->dpb[i];
+
+		if (!(ndpb->flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE))
+			continue;
+
+		/*
+		 * To cut off some comparisons, iterate only on target DPB
+		 * entries were already used.
+		 */
+		for_each_set_bit(j, in_use, ARRAY_SIZE(dec_param->dpb)) {
+			struct v4l2_h264_dpb_entry *cdpb;
+
+			cdpb = &dpb[j];
+			if (!dpb_entry_match(cdpb, ndpb))
+				continue;
+
+			*cdpb = *ndpb;
+			set_bit(j, used);
+			/* Don't reiterate on this one. */
+			clear_bit(j, in_use);
+			break;
+		}
+
+		if (j == ARRAY_SIZE(dec_param->dpb))
+			set_bit(i, new);
+	}
+
+	/* For entries that could not be matched, use remaining free slots. */
+	for_each_set_bit(i, new, ARRAY_SIZE(dec_param->dpb)) {
+		const struct v4l2_h264_dpb_entry *ndpb = &dec_param->dpb[i];
+		struct v4l2_h264_dpb_entry *cdpb;
+
+		/*
+		 * Both arrays are of the same sizes, so there is no way
+		 * we can end up with no space in target array, unless
+		 * something is buggy.
+		 */
+		j = find_first_zero_bit(used, ARRAY_SIZE(dec_param->dpb));
+		if (WARN_ON(j >= ARRAY_SIZE(dec_param->dpb)))
+			return;
+
+		cdpb = &dpb[j];
+		*cdpb = *ndpb;
+		set_bit(j, used);
+	}
+}
+
+/*
+ * The firmware expects unused reflist entries to have the value 0x20.
+ */
+static void fixup_ref_list(u8 *ref_list, size_t num_valid)
+{
+	memset(&ref_list[num_valid], 0x20, 32 - num_valid);
+}
+
+static void get_vdec_decode_parameters(struct vdec_h264_slice_inst *inst)
+{
+	const struct v4l2_ctrl_h264_decode_params *dec_params =
+		get_ctrl_ptr(inst->ctx, V4L2_CID_STATELESS_H264_DECODE_PARAMS);
+	const struct v4l2_ctrl_h264_sps *sps =
+		get_ctrl_ptr(inst->ctx, V4L2_CID_STATELESS_H264_SPS);
+	const struct v4l2_ctrl_h264_pps *pps =
+		get_ctrl_ptr(inst->ctx, V4L2_CID_STATELESS_H264_PPS);
+	const struct v4l2_ctrl_h264_scaling_matrix *scaling_matrix =
+		get_ctrl_ptr(inst->ctx, V4L2_CID_STATELESS_H264_SCALING_MATRIX);
+	struct mtk_h264_dec_slice_param *slice_param = &inst->h264_slice_param;
+	struct v4l2_h264_reflist_builder reflist_builder;
+	u8 *p0_reflist = slice_param->decode_params.ref_pic_list_p0;
+	u8 *b0_reflist = slice_param->decode_params.ref_pic_list_b0;
+	u8 *b1_reflist = slice_param->decode_params.ref_pic_list_b1;
+
+	update_dpb(dec_params, inst->dpb);
+
+	get_h264_sps_parameters(&slice_param->sps, sps);
+	get_h264_pps_parameters(&slice_param->pps, pps);
+	get_h264_scaling_matrix(&slice_param->scaling_matrix, scaling_matrix);
+	get_h264_decode_parameters(&slice_param->decode_params, dec_params,
+				   inst->dpb);
+	get_h264_dpb_list(inst, slice_param);
+
+	/* Build the reference lists */
+	v4l2_h264_init_reflist_builder(&reflist_builder, dec_params, sps,
+				       inst->dpb);
+	v4l2_h264_build_p_ref_list(&reflist_builder, p0_reflist);
+	v4l2_h264_build_b_ref_lists(&reflist_builder, b0_reflist, b1_reflist);
+	/* Adapt the built lists to the firmware's expectations */
+	fixup_ref_list(p0_reflist, reflist_builder.num_valid);
+	fixup_ref_list(b0_reflist, reflist_builder.num_valid);
+	fixup_ref_list(b1_reflist, reflist_builder.num_valid);
+
+	memcpy(&inst->vsi_ctx.h264_slice_params, slice_param,
+	       sizeof(inst->vsi_ctx.h264_slice_params));
+}
+
+static unsigned int get_mv_buf_size(unsigned int width, unsigned int height)
+{
+	int unit_size = (width / MB_UNIT_LEN) * (height / MB_UNIT_LEN) + 8;
+
+	return HW_MB_STORE_SZ * unit_size;
+}
+
+static int allocate_predication_buf(struct vdec_h264_slice_inst *inst)
+{
+	int err = 0;
+
+	inst->pred_buf.size = BUF_PREDICTION_SZ;
+	err = mtk_vcodec_mem_alloc(inst->ctx, &inst->pred_buf);
+	if (err) {
+		mtk_vcodec_err(inst, "failed to allocate ppl buf");
+		return err;
+	}
+
+	inst->vsi_ctx.pred_buf_dma = inst->pred_buf.dma_addr;
+	return 0;
+}
+
+static void free_predication_buf(struct vdec_h264_slice_inst *inst)
+{
+	struct mtk_vcodec_mem *mem = NULL;
+
+	mtk_vcodec_debug_enter(inst);
+
+	inst->vsi_ctx.pred_buf_dma = 0;
+	mem = &inst->pred_buf;
+	if (mem->va)
+		mtk_vcodec_mem_free(inst->ctx, mem);
+}
+
+static int alloc_mv_buf(struct vdec_h264_slice_inst *inst,
+	struct vdec_pic_info *pic)
+{
+	int i;
+	int err;
+	struct mtk_vcodec_mem *mem = NULL;
+	unsigned int buf_sz = get_mv_buf_size(pic->buf_w, pic->buf_h);
+
+	mtk_v4l2_debug(3, "size = 0x%lx", buf_sz);
+	for (i = 0; i < H264_MAX_MV_NUM; i++) {
+		mem = &inst->mv_buf[i];
+		if (mem->va)
+			mtk_vcodec_mem_free(inst->ctx, mem);
+		mem->size = buf_sz;
+		err = mtk_vcodec_mem_alloc(inst->ctx, mem);
+		if (err) {
+			mtk_vcodec_err(inst, "failed to allocate mv buf");
+			return err;
+		}
+		inst->vsi_ctx.mv_buf_dma[i] = mem->dma_addr;
+	}
+
+	return 0;
+}
+
+static void free_mv_buf(struct vdec_h264_slice_inst *inst)
+{
+	int i;
+	struct mtk_vcodec_mem *mem = NULL;
+
+	for (i = 0; i < H264_MAX_MV_NUM; i++) {
+		inst->vsi_ctx.mv_buf_dma[i] = 0;
+		mem = &inst->mv_buf[i];
+		if (mem->va)
+			mtk_vcodec_mem_free(inst->ctx, mem);
+	}
+}
+
+static void get_pic_info(struct vdec_h264_slice_inst *inst,
+			 struct vdec_pic_info *pic)
+{
+	struct mtk_vcodec_ctx *ctx = inst->ctx;
+
+	ctx->picinfo.buf_w = (ctx->picinfo.pic_w + 15) & 0xFFFFFFF0;
+	ctx->picinfo.buf_h = (ctx->picinfo.pic_h + 31) & 0xFFFFFFE0;
+	ctx->picinfo.fb_sz[0] = ctx->picinfo.buf_w * ctx->picinfo.buf_h;
+	ctx->picinfo.fb_sz[1] = ctx->picinfo.fb_sz[0] >> 1;
+	inst->vsi_ctx.dec.cap_num_planes =
+		ctx->q_data[MTK_Q_DATA_DST].fmt->num_planes;
+
+	*pic = ctx->picinfo;
+	mtk_vcodec_debug(inst, "pic(%d, %d), buf(%d, %d)",
+			 ctx->picinfo.pic_w, ctx->picinfo.pic_h,
+			 ctx->picinfo.buf_w, ctx->picinfo.buf_h);
+	mtk_vcodec_debug(inst, "Y/C(%d, %d)", ctx->picinfo.fb_sz[0],
+		ctx->picinfo.fb_sz[1]);
+
+	if ((ctx->last_decoded_picinfo.pic_w != ctx->picinfo.pic_w) ||
+		(ctx->last_decoded_picinfo.pic_h != ctx->picinfo.pic_h)) {
+		inst->vsi_ctx.dec.resolution_changed = true;
+		if ((ctx->last_decoded_picinfo.buf_w != ctx->picinfo.buf_w) ||
+			(ctx->last_decoded_picinfo.buf_h != ctx->picinfo.buf_h))
+			inst->vsi_ctx.dec.realloc_mv_buf = true;
+
+		mtk_v4l2_debug(1, "ResChg: (%d %d) : old(%d, %d) -> new(%d, %d)",
+			inst->vsi_ctx.dec.resolution_changed,
+			inst->vsi_ctx.dec.realloc_mv_buf,
+			ctx->last_decoded_picinfo.pic_w,
+			ctx->last_decoded_picinfo.pic_h,
+			ctx->picinfo.pic_w, ctx->picinfo.pic_h);
+	}
+}
+
+static void get_crop_info(struct vdec_h264_slice_inst *inst,
+	struct v4l2_rect *cr)
+{
+	cr->left = inst->vsi_ctx.crop.left;
+	cr->top = inst->vsi_ctx.crop.top;
+	cr->width = inst->vsi_ctx.crop.width;
+	cr->height = inst->vsi_ctx.crop.height;
+
+	mtk_vcodec_debug(inst, "l=%d, t=%d, w=%d, h=%d",
+			 cr->left, cr->top, cr->width, cr->height);
+}
+
+static void get_dpb_size(struct vdec_h264_slice_inst *inst,
+	unsigned int *dpb_sz)
+{
+	*dpb_sz = inst->vsi_ctx.dec.dpb_sz;
+	mtk_vcodec_debug(inst, "sz=%d", *dpb_sz);
+}
+
+static int vdec_h264_slice_init(struct mtk_vcodec_ctx *ctx)
+{
+	struct vdec_h264_slice_inst *inst = NULL;
+	int err;
+
+	inst = kzalloc(sizeof(*inst), GFP_KERNEL);
+	if (!inst)
+		return -ENOMEM;
+
+	inst->ctx = ctx;
+
+	inst->vpu.id = SCP_IPI_VDEC_H264;
+	inst->vpu.ctx = ctx;
+
+	err = vpu_dec_init(&inst->vpu);
+	if (err) {
+		mtk_vcodec_err(inst, "vdec_h264 init err=%d", err);
+		goto error_free_inst;
+	}
+
+	memcpy(&inst->vsi_ctx, inst->vpu.vsi, sizeof(inst->vsi_ctx));
+	inst->vsi_ctx.dec.resolution_changed = true;
+	inst->vsi_ctx.dec.realloc_mv_buf = true;
+
+	err = allocate_predication_buf(inst);
+	if (err)
+		goto error_deinit;
+
+	mtk_vcodec_debug(inst, "struct size = %d,%d,%d,%d\n",
+		sizeof(struct mtk_h264_sps_param),
+		sizeof(struct mtk_h264_pps_param),
+		sizeof(struct mtk_h264_dec_slice_param),
+		sizeof(struct mtk_h264_dpb_info));
+
+	mtk_vcodec_debug(inst, "H264 Instance >> %p", inst);
+
+	ctx->drv_handle = inst;
+	return 0;
+
+error_deinit:
+	vpu_dec_deinit(&inst->vpu);
+
+error_free_inst:
+	kfree(inst);
+	return err;
+}
+
+static void vdec_h264_slice_deinit(void *h_vdec)
+{
+	struct vdec_h264_slice_inst *inst =
+		(struct vdec_h264_slice_inst *)h_vdec;
+
+	mtk_vcodec_debug_enter(inst);
+
+	vpu_dec_deinit(&inst->vpu);
+	free_predication_buf(inst);
+	free_mv_buf(inst);
+
+	kfree(inst);
+}
+
+static int vdec_h264_slice_decode(void *h_vdec, struct mtk_vcodec_mem *bs,
+				  struct vdec_fb *fb, bool *res_chg)
+{
+	struct vdec_h264_slice_inst *inst =
+		(struct vdec_h264_slice_inst *)h_vdec;
+	const struct v4l2_ctrl_h264_decode_params *dec_params =
+		get_ctrl_ptr(inst->ctx, V4L2_CID_STATELESS_H264_DECODE_PARAMS);
+	struct vdec_vpu_inst *vpu = &inst->vpu;
+	uint32_t data[2];
+	uint64_t y_fb_dma;
+	uint64_t c_fb_dma;
+	int err;
+
+	mtk_vcodec_debug(inst, "+ [%d] FB y_dma=%llx c_dma=%llx va=%p",
+			 ++inst->num_nalu, y_fb_dma, c_fb_dma, fb);
+
+	/* bs NULL means flush decoder */
+	if (bs == NULL)
+		return vpu_dec_reset(vpu);
+
+	y_fb_dma = fb ? (u64)fb->base_y.dma_addr : 0;
+	c_fb_dma = fb ? (u64)fb->base_c.dma_addr : 0;
+
+	inst->vsi_ctx.dec.bs_dma = (uint64_t)bs->dma_addr;
+	inst->vsi_ctx.dec.y_fb_dma = y_fb_dma;
+	inst->vsi_ctx.dec.c_fb_dma = c_fb_dma;
+	inst->vsi_ctx.dec.vdec_fb_va = (u64)(uintptr_t)fb;
+
+	get_vdec_decode_parameters(inst);
+	data[0] = bs->size;
+	/*
+	 * Reconstruct the first byte of the NAL unit, as the firmware requests
+	 * that information to be passed even though it is present in the stream
+	 * itself...
+	 */
+	data[1] = (dec_params->nal_ref_idc << 5) |
+		  ((dec_params->flags & V4L2_H264_DECODE_PARAM_FLAG_IDR_PIC)
+			? 0x5 : 0x1);
+
+	*res_chg = inst->vsi_ctx.dec.resolution_changed;
+	if (*res_chg) {
+		mtk_vcodec_debug(inst, "- resolution changed -");
+		if (inst->vsi_ctx.dec.realloc_mv_buf) {
+			err = alloc_mv_buf(inst, &(inst->ctx->picinfo));
+			inst->vsi_ctx.dec.realloc_mv_buf = false;
+			if (err)
+				goto err_free_fb_out;
+		}
+		*res_chg = false;
+	}
+
+	memcpy(inst->vpu.vsi, &inst->vsi_ctx, sizeof(inst->vsi_ctx));
+	err = vpu_dec_start(vpu, data, 2);
+	if (err)
+		goto err_free_fb_out;
+
+	/* wait decoder done interrupt */
+	err = mtk_vcodec_wait_for_done_ctx(inst->ctx,
+					   MTK_INST_IRQ_RECEIVED,
+					   WAIT_INTR_TIMEOUT_MS);
+	if (err)
+		goto err_free_fb_out;
+	vpu_dec_end(vpu);
+
+	memcpy(&inst->vsi_ctx, inst->vpu.vsi, sizeof(inst->vsi_ctx));
+	mtk_vcodec_debug(inst, "\n - NALU[%d] -\n", inst->num_nalu, nal_type);
+	return 0;
+
+err_free_fb_out:
+	mtk_vcodec_err(inst, "\n - NALU[%d] err=%d -\n", inst->num_nalu, err);
+	return err;
+}
+
+static int vdec_h264_slice_get_param(void *h_vdec,
+			       enum vdec_get_param_type type, void *out)
+{
+	struct vdec_h264_slice_inst *inst =
+		(struct vdec_h264_slice_inst *)h_vdec;
+
+	switch (type) {
+	case GET_PARAM_PIC_INFO:
+		get_pic_info(inst, out);
+		break;
+
+	case GET_PARAM_DPB_SIZE:
+		get_dpb_size(inst, out);
+		break;
+
+	case GET_PARAM_CROP_INFO:
+		get_crop_info(inst, out);
+		break;
+
+	default:
+		mtk_vcodec_err(inst, "invalid get parameter type=%d", type);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+const struct vdec_common_if vdec_h264_slice_if = {
+	.init		= vdec_h264_slice_init,
+	.decode		= vdec_h264_slice_decode,
+	.get_param	= vdec_h264_slice_get_param,
+	.deinit		= vdec_h264_slice_deinit,
+};
diff --git a/drivers/media/platform/mtk-vcodec/vdec_drv_if.c b/drivers/media/platform/mtk-vcodec/vdec_drv_if.c
index b18743b906ea..42008243ceac 100644
--- a/drivers/media/platform/mtk-vcodec/vdec_drv_if.c
+++ b/drivers/media/platform/mtk-vcodec/vdec_drv_if.c
@@ -19,6 +19,9 @@ int vdec_if_init(struct mtk_vcodec_ctx *ctx, unsigned int fourcc)
 	int ret = 0;
 
 	switch (fourcc) {
+	case V4L2_PIX_FMT_H264_SLICE:
+		ctx->dec_if = &vdec_h264_slice_if;
+		break;
 	case V4L2_PIX_FMT_H264:
 		ctx->dec_if = &vdec_h264_if;
 		break;
diff --git a/drivers/media/platform/mtk-vcodec/vdec_drv_if.h b/drivers/media/platform/mtk-vcodec/vdec_drv_if.h
index ec8f4e8d3d23..d467e8af4a84 100644
--- a/drivers/media/platform/mtk-vcodec/vdec_drv_if.h
+++ b/drivers/media/platform/mtk-vcodec/vdec_drv_if.h
@@ -55,6 +55,7 @@ struct vdec_fb_node {
 };
 
 extern const struct vdec_common_if vdec_h264_if;
+extern const struct vdec_common_if vdec_h264_slice_if;
 extern const struct vdec_common_if vdec_vp8_if;
 extern const struct vdec_common_if vdec_vp9_if;
 
-- 
2.31.1.498.g6c1eba8ee3d-goog


^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v4 07/15] media: mtk-vcodec: vdec: add media device if using stateless api
  2021-04-27 11:15 [PATCH v4 00/15] media: mtk-vcodec: support for MT8183 decoder Alexandre Courbot
                   ` (5 preceding siblings ...)
  2021-04-27 11:15 ` [PATCH v4 06/15] media: mtk-vcodec: vdec: support stateless H.264 decoding Alexandre Courbot
@ 2021-04-27 11:15 ` Alexandre Courbot
  2021-04-29  7:28   ` Hans Verkuil
  2021-05-17  4:35   ` Hsin-Yi Wang
  2021-04-27 11:15 ` [PATCH v4 08/15] dt-bindings: media: document mediatek,mt8183-vcodec-dec Alexandre Courbot
                   ` (9 subsequent siblings)
  16 siblings, 2 replies; 35+ messages in thread
From: Alexandre Courbot @ 2021-04-27 11:15 UTC (permalink / raw)
  To: Tiffany Lin, Andrew-CT Chen, Rob Herring, Yunfei Dong
  Cc: Mauro Carvalho Chehab, Hans Verkuil, linux-media, linux-kernel,
	linux-mediatek, Alexandre Courbot

From: Yunfei Dong <yunfei.dong@mediatek.com>

The stateless API requires a media device for issuing requests. Add one
if we are being instantiated as a stateless decoder.

Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
[acourbot: refactor, cleanup and split]
Co-developed-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
---
 drivers/media/platform/Kconfig                |  1 +
 .../platform/mtk-vcodec/mtk_vcodec_dec_drv.c  | 39 +++++++++++++++++++
 .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  2 +
 3 files changed, 42 insertions(+)

diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index ae1468aa1b4e..4154fdec2efb 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -315,6 +315,7 @@ config VIDEO_MEDIATEK_VCODEC
 	select VIDEO_MEDIATEK_VCODEC_VPU if VIDEO_MEDIATEK_VPU
 	select VIDEO_MEDIATEK_VCODEC_SCP if MTK_SCP
 	select V4L2_H264
+	select MEDIA_CONTROLLER
 	help
 	  Mediatek video codec driver provides HW capability to
 	  encode and decode in a range of video formats on MT8173
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
index 533781d4680a..e942e28f96fe 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
@@ -14,6 +14,7 @@
 #include <media/v4l2-event.h>
 #include <media/v4l2-mem2mem.h>
 #include <media/videobuf2-dma-contig.h>
+#include <media/v4l2-device.h>
 
 #include "mtk_vcodec_drv.h"
 #include "mtk_vcodec_dec.h"
@@ -324,6 +325,31 @@ static int mtk_vcodec_probe(struct platform_device *pdev)
 		goto err_event_workq;
 	}
 
+	if (dev->vdec_pdata->uses_stateless_api) {
+		dev->mdev_dec.dev = &pdev->dev;
+		strscpy(dev->mdev_dec.model, MTK_VCODEC_DEC_NAME,
+				sizeof(dev->mdev_dec.model));
+
+		media_device_init(&dev->mdev_dec);
+		dev->mdev_dec.ops = &mtk_vcodec_media_ops;
+		dev->v4l2_dev.mdev = &dev->mdev_dec;
+
+		ret = v4l2_m2m_register_media_controller(dev->m2m_dev_dec,
+			dev->vfd_dec, MEDIA_ENT_F_PROC_VIDEO_DECODER);
+		if (ret) {
+			mtk_v4l2_err("Failed to register media controller");
+			goto err_reg_cont;
+		}
+
+		ret = media_device_register(&dev->mdev_dec);
+		if (ret) {
+			mtk_v4l2_err("Failed to register media device");
+			goto err_media_reg;
+		}
+
+		mtk_v4l2_debug(0, "media registered as /dev/media%d",
+			vfd_dec->num);
+	}
 	ret = video_register_device(vfd_dec, VFL_TYPE_VIDEO, 0);
 	if (ret) {
 		mtk_v4l2_err("Failed to register video device");
@@ -336,6 +362,12 @@ static int mtk_vcodec_probe(struct platform_device *pdev)
 	return 0;
 
 err_dec_reg:
+	if (dev->vdec_pdata->uses_stateless_api)
+		media_device_unregister(&dev->mdev_dec);
+err_media_reg:
+	if (dev->vdec_pdata->uses_stateless_api)
+		v4l2_m2m_unregister_media_controller(dev->m2m_dev_dec);
+err_reg_cont:
 	destroy_workqueue(dev->decode_workqueue);
 err_event_workq:
 	v4l2_m2m_release(dev->m2m_dev_dec);
@@ -368,6 +400,13 @@ static int mtk_vcodec_dec_remove(struct platform_device *pdev)
 
 	flush_workqueue(dev->decode_workqueue);
 	destroy_workqueue(dev->decode_workqueue);
+
+	if (media_devnode_is_registered(dev->mdev_dec.devnode)) {
+		media_device_unregister(&dev->mdev_dec);
+		v4l2_m2m_unregister_media_controller(dev->m2m_dev_dec);
+		media_device_cleanup(&dev->mdev_dec);
+	}
+
 	if (dev->m2m_dev_dec)
 		v4l2_m2m_release(dev->m2m_dev_dec);
 
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
index 78d4a7728ddf..10edd238c939 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
@@ -383,6 +383,7 @@ struct mtk_vcodec_enc_pdata {
  * struct mtk_vcodec_dev - driver data
  * @v4l2_dev: V4L2 device to register video devices for.
  * @vfd_dec: Video device for decoder
+ * @mdev_dec: Media device for decoder
  * @vfd_enc: Video device for encoder.
  *
  * @m2m_dev_dec: m2m device for decoder
@@ -418,6 +419,7 @@ struct mtk_vcodec_enc_pdata {
 struct mtk_vcodec_dev {
 	struct v4l2_device v4l2_dev;
 	struct video_device *vfd_dec;
+	struct media_device mdev_dec;
 	struct video_device *vfd_enc;
 
 	struct v4l2_m2m_dev *m2m_dev_dec;
-- 
2.31.1.498.g6c1eba8ee3d-goog


^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v4 08/15] dt-bindings: media: document mediatek,mt8183-vcodec-dec
  2021-04-27 11:15 [PATCH v4 00/15] media: mtk-vcodec: support for MT8183 decoder Alexandre Courbot
                   ` (6 preceding siblings ...)
  2021-04-27 11:15 ` [PATCH v4 07/15] media: mtk-vcodec: vdec: add media device if using stateless api Alexandre Courbot
@ 2021-04-27 11:15 ` Alexandre Courbot
  2021-05-04 12:55   ` Alexandre Courbot
  2021-04-27 11:15 ` [PATCH v4 09/15] media: mtk-vcodec: enable MT8183 decoder Alexandre Courbot
                   ` (8 subsequent siblings)
  16 siblings, 1 reply; 35+ messages in thread
From: Alexandre Courbot @ 2021-04-27 11:15 UTC (permalink / raw)
  To: Tiffany Lin, Andrew-CT Chen, Rob Herring, Yunfei Dong
  Cc: Mauro Carvalho Chehab, Hans Verkuil, linux-media, linux-kernel,
	linux-mediatek, Alexandre Courbot

MT8183's decoder is instantiated similarly to MT8173's.

Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
---
 Documentation/devicetree/bindings/media/mediatek-vcodec.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
index 06db6837cefd..a2a2a9e2ade3 100644
--- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
@@ -9,6 +9,7 @@ Required properties:
   "mediatek,mt8173-vcodec-enc" for mt8173 avc encoder.
   "mediatek,mt8183-vcodec-enc" for MT8183 encoder.
   "mediatek,mt8173-vcodec-dec" for MT8173 decoder.
+  "mediatek,mt8183-vcodec-dec" for MT8183 decoder.
 - reg : Physical base address of the video codec registers and length of
   memory mapped region.
 - interrupts : interrupt number to the cpu.
-- 
2.31.1.498.g6c1eba8ee3d-goog


^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v4 09/15] media: mtk-vcodec: enable MT8183 decoder
  2021-04-27 11:15 [PATCH v4 00/15] media: mtk-vcodec: support for MT8183 decoder Alexandre Courbot
                   ` (7 preceding siblings ...)
  2021-04-27 11:15 ` [PATCH v4 08/15] dt-bindings: media: document mediatek,mt8183-vcodec-dec Alexandre Courbot
@ 2021-04-27 11:15 ` Alexandre Courbot
  2021-04-27 11:15 ` [PATCH v4 10/15] media: mtk-vcodec: vdec: use helpers in VIDIOC_(TRY_)DECODER_CMD Alexandre Courbot
                   ` (7 subsequent siblings)
  16 siblings, 0 replies; 35+ messages in thread
From: Alexandre Courbot @ 2021-04-27 11:15 UTC (permalink / raw)
  To: Tiffany Lin, Andrew-CT Chen, Rob Herring, Yunfei Dong
  Cc: Mauro Carvalho Chehab, Hans Verkuil, linux-media, linux-kernel,
	linux-mediatek, Alexandre Courbot

From: Yunfei Dong <yunfei.dong@mediatek.com>

Now that all the supporting blocks are present, enable decoder for
MT8183.

Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
[acourbot: refactor, cleanup and split]
Co-developed-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
---
 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
index e942e28f96fe..e0526c0900c8 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
@@ -383,12 +383,17 @@ static int mtk_vcodec_probe(struct platform_device *pdev)
 }
 
 extern const struct mtk_vcodec_dec_pdata mtk_vdec_8173_pdata;
+extern const struct mtk_vcodec_dec_pdata mtk_vdec_8183_pdata;
 
 static const struct of_device_id mtk_vcodec_match[] = {
 	{
 		.compatible = "mediatek,mt8173-vcodec-dec",
 		.data = &mtk_vdec_8173_pdata,
 	},
+	{
+		.compatible = "mediatek,mt8183-vcodec-dec",
+		.data = &mtk_vdec_8183_pdata,
+	},
 	{},
 };
 
-- 
2.31.1.498.g6c1eba8ee3d-goog


^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v4 10/15] media: mtk-vcodec: vdec: use helpers in VIDIOC_(TRY_)DECODER_CMD
  2021-04-27 11:15 [PATCH v4 00/15] media: mtk-vcodec: support for MT8183 decoder Alexandre Courbot
                   ` (8 preceding siblings ...)
  2021-04-27 11:15 ` [PATCH v4 09/15] media: mtk-vcodec: enable MT8183 decoder Alexandre Courbot
@ 2021-04-27 11:15 ` Alexandre Courbot
  2021-04-27 11:15 ` [PATCH v4 11/15] media: mtk-vcodec: vdec: Support H264 profile control Alexandre Courbot
                   ` (6 subsequent siblings)
  16 siblings, 0 replies; 35+ messages in thread
From: Alexandre Courbot @ 2021-04-27 11:15 UTC (permalink / raw)
  To: Tiffany Lin, Andrew-CT Chen, Rob Herring, Yunfei Dong
  Cc: Mauro Carvalho Chehab, Hans Verkuil, linux-media, linux-kernel,
	linux-mediatek, Alexandre Courbot

Let's use the dedicated helpers to make sure we get the expected
behavior on stateful decoders as well.

Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
---
 .../media/platform/mtk-vcodec/mtk_vcodec_dec.c   | 16 ++--------------
 1 file changed, 2 insertions(+), 14 deletions(-)

diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
index 01c5333d6cff..4ef4b68ec9bd 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
@@ -52,22 +52,10 @@ static int vidioc_try_decoder_cmd(struct file *file, void *priv,
 	if (ctx->dev->vdec_pdata->uses_stateless_api)
 		return v4l2_m2m_ioctl_stateless_try_decoder_cmd(file, priv,
 								cmd);
-
-	switch (cmd->cmd) {
-	case V4L2_DEC_CMD_STOP:
-	case V4L2_DEC_CMD_START:
-		if (cmd->flags != 0) {
-			mtk_v4l2_err("cmd->flags=%u", cmd->flags);
-			return -EINVAL;
-		}
-		break;
-	default:
-		return -EINVAL;
-	}
-	return 0;
+	else
+		return v4l2_m2m_ioctl_try_decoder_cmd(file, priv, cmd);
 }
 
-
 static int vidioc_decoder_cmd(struct file *file, void *priv,
 				struct v4l2_decoder_cmd *cmd)
 {
-- 
2.31.1.498.g6c1eba8ee3d-goog


^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v4 11/15] media: mtk-vcodec: vdec: Support H264 profile control
  2021-04-27 11:15 [PATCH v4 00/15] media: mtk-vcodec: support for MT8183 decoder Alexandre Courbot
                   ` (9 preceding siblings ...)
  2021-04-27 11:15 ` [PATCH v4 10/15] media: mtk-vcodec: vdec: use helpers in VIDIOC_(TRY_)DECODER_CMD Alexandre Courbot
@ 2021-04-27 11:15 ` Alexandre Courbot
  2021-04-27 11:15 ` [PATCH v4 12/15] media: mtk-vcodec: vdec: clamp OUTPUT resolution to hardware limits Alexandre Courbot
                   ` (5 subsequent siblings)
  16 siblings, 0 replies; 35+ messages in thread
From: Alexandre Courbot @ 2021-04-27 11:15 UTC (permalink / raw)
  To: Tiffany Lin, Andrew-CT Chen, Rob Herring, Yunfei Dong
  Cc: Mauro Carvalho Chehab, Hans Verkuil, linux-media, linux-kernel,
	linux-mediatek, Hirokazu Honda, Alexandre Courbot

From: Hirokazu Honda <hiroh@chromium.org>

Add H264 profiles supported by the MediaTek 8173 decoder.

Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
[acourbot: fix commit log a bit]
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
---
 .../platform/mtk-vcodec/mtk_vcodec_dec_stateful.c     | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateful.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateful.c
index c5538fcfc9a5..d815125c81a4 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateful.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateful.c
@@ -611,7 +611,16 @@ static int mtk_vcodec_dec_ctrls_setup(struct mtk_vcodec_ctx *ctx)
 				V4L2_CID_MPEG_VIDEO_VP9_PROFILE,
 				V4L2_MPEG_VIDEO_VP9_PROFILE_0,
 				0, V4L2_MPEG_VIDEO_VP9_PROFILE_0);
-
+	/*
+	 * H264. Baseline / Extended decoding is not supported.
+	 */
+	v4l2_ctrl_new_std_menu(&ctx->ctrl_hdl,
+			&mtk_vcodec_dec_ctrl_ops,
+			V4L2_CID_MPEG_VIDEO_H264_PROFILE,
+			V4L2_MPEG_VIDEO_H264_PROFILE_HIGH,
+			BIT(V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE) |
+			BIT(V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED),
+			V4L2_MPEG_VIDEO_H264_PROFILE_MAIN);
 	if (ctx->ctrl_hdl.error) {
 		mtk_v4l2_err("Adding control failed %d",
 				ctx->ctrl_hdl.error);
-- 
2.31.1.498.g6c1eba8ee3d-goog


^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v4 12/15] media: mtk-vcodec: vdec: clamp OUTPUT resolution to hardware limits
  2021-04-27 11:15 [PATCH v4 00/15] media: mtk-vcodec: support for MT8183 decoder Alexandre Courbot
                   ` (10 preceding siblings ...)
  2021-04-27 11:15 ` [PATCH v4 11/15] media: mtk-vcodec: vdec: Support H264 profile control Alexandre Courbot
@ 2021-04-27 11:15 ` Alexandre Courbot
  2021-04-27 11:15 ` [PATCH v4 13/15] media: mtk-vcodec: make flush buffer reusable by encoder Alexandre Courbot
                   ` (4 subsequent siblings)
  16 siblings, 0 replies; 35+ messages in thread
From: Alexandre Courbot @ 2021-04-27 11:15 UTC (permalink / raw)
  To: Tiffany Lin, Andrew-CT Chen, Rob Herring, Yunfei Dong
  Cc: Mauro Carvalho Chehab, Hans Verkuil, linux-media, linux-kernel,
	linux-mediatek, Alexandre Courbot

Calling S_FMT or TRY_FMT on the OUTPUT queue should adjust the
resolution to the limits supported by the hardware. Until now this was
only done on the CAPTURE queue, which could make clients believe that
unsupported resolutions can be used when they set the coded size on the
OUTPUT queue.

In the case of the stateless decoder, the problem was even bigger since
subsequently calling G_FMT on the CAPTURE queue would result in the
unclamped resolution being returned, further inducing the client into
error.

Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
---
 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
index 4ef4b68ec9bd..0fafe8f9e1b9 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
@@ -223,19 +223,19 @@ static int vidioc_try_fmt(struct v4l2_format *f,
 
 	pix_fmt_mp->field = V4L2_FIELD_NONE;
 
+	pix_fmt_mp->width = clamp(pix_fmt_mp->width,
+				MTK_VDEC_MIN_W,
+				MTK_VDEC_MAX_W);
+	pix_fmt_mp->height = clamp(pix_fmt_mp->height,
+				MTK_VDEC_MIN_H,
+				MTK_VDEC_MAX_H);
+
 	if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
 		pix_fmt_mp->num_planes = 1;
 		pix_fmt_mp->plane_fmt[0].bytesperline = 0;
 	} else if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
 		int tmp_w, tmp_h;
 
-		pix_fmt_mp->height = clamp(pix_fmt_mp->height,
-					MTK_VDEC_MIN_H,
-					MTK_VDEC_MAX_H);
-		pix_fmt_mp->width = clamp(pix_fmt_mp->width,
-					MTK_VDEC_MIN_W,
-					MTK_VDEC_MAX_W);
-
 		/*
 		 * Find next closer width align 64, heign align 64, size align
 		 * 64 rectangle
-- 
2.31.1.498.g6c1eba8ee3d-goog


^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v4 13/15] media: mtk-vcodec: make flush buffer reusable by encoder
  2021-04-27 11:15 [PATCH v4 00/15] media: mtk-vcodec: support for MT8183 decoder Alexandre Courbot
                   ` (11 preceding siblings ...)
  2021-04-27 11:15 ` [PATCH v4 12/15] media: mtk-vcodec: vdec: clamp OUTPUT resolution to hardware limits Alexandre Courbot
@ 2021-04-27 11:15 ` Alexandre Courbot
  2021-04-27 11:15 ` [PATCH v4 14/15] media: mtk-vcodec: venc: support START and STOP commands Alexandre Courbot
                   ` (3 subsequent siblings)
  16 siblings, 0 replies; 35+ messages in thread
From: Alexandre Courbot @ 2021-04-27 11:15 UTC (permalink / raw)
  To: Tiffany Lin, Andrew-CT Chen, Rob Herring, Yunfei Dong
  Cc: Mauro Carvalho Chehab, Hans Verkuil, linux-media, linux-kernel,
	linux-mediatek, Alexandre Courbot

The flush buffer is a special buffer that tells the decoder driver to
send an empty CAPTURE frame to the client with V4L2_BUF_FLAG_LAST set.

We need similar functionality for the encoder ; however currently the
flush buffer depends on decoder-specific structures and thus cannot be
reused with the encoder.

Fix this by testing for this buffer by its VB2 address, and not through
a dedicated flag stored in a higher-level decoder structure. This also
allows us to remove said flag and simplify the code a bit.

Since the flush buffer should never be used in the stateless decoder,
also add safeguards to check against it.

Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
---
 .../media/platform/mtk-vcodec/mtk_vcodec_dec.c    |  9 ++-------
 .../media/platform/mtk-vcodec/mtk_vcodec_dec.h    |  2 --
 .../platform/mtk-vcodec/mtk_vcodec_dec_drv.c      | 12 +-----------
 .../platform/mtk-vcodec/mtk_vcodec_dec_stateful.c | 15 +++++++++------
 .../media/platform/mtk-vcodec/mtk_vcodec_drv.h    |  6 ++++--
 5 files changed, 16 insertions(+), 28 deletions(-)

diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
index 0fafe8f9e1b9..914b1c526943 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
@@ -86,8 +86,7 @@ static int vidioc_decoder_cmd(struct file *file, void *priv,
 			mtk_v4l2_debug(1, "Capture stream is off. No need to flush.");
 			return 0;
 		}
-		v4l2_m2m_buf_queue(ctx->m2m_ctx,
-				   &ctx->empty_flush_buf->m2m_buf.vb);
+		v4l2_m2m_buf_queue(ctx->m2m_ctx, &ctx->empty_flush_buf.vb);
 		v4l2_m2m_try_schedule(ctx->m2m_ctx);
 		break;
 
@@ -779,8 +778,6 @@ int vb2ops_vdec_buf_init(struct vb2_buffer *vb)
 	if (vb->vb2_queue->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
 		buf->used = false;
 		buf->queued_in_v4l2 = false;
-	} else {
-		buf->lastframe = false;
 	}
 
 	return 0;
@@ -807,9 +804,7 @@ void vb2ops_vdec_stop_streaming(struct vb2_queue *q)
 
 	if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
 		while ((src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx))) {
-			struct mtk_video_dec_buf *buf_info = container_of(
-				 src_buf, struct mtk_video_dec_buf, m2m_buf.vb);
-			if (!buf_info->lastframe) {
+			if (src_buf != &ctx->empty_flush_buf.vb) {
 				struct media_request *req =
 					src_buf->vb2_buf.req_obj.req;
 				v4l2_m2m_buf_done(src_buf,
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h
index 6b29d7d9ae15..bb0dfa9795b8 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h
@@ -42,7 +42,6 @@ struct vdec_fb {
  * @queued_in_vb2:	Capture buffer is queue in vb2
  * @queued_in_v4l2:	Capture buffer is in v4l2 driver, but not in vb2
  *			queue yet
- * @lastframe:		Intput buffer is last buffer - EOS
  * @error:		An unrecoverable error occurs on this buffer.
  * @frame_buffer:	Decode status, and buffer information of Capture buffer
  * @bs_buffer:	Output buffer info
@@ -55,7 +54,6 @@ struct mtk_video_dec_buf {
 	bool	used;
 	bool	queued_in_vb2;
 	bool	queued_in_v4l2;
-	bool	lastframe;
 
 	bool	error;
 
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
index e0526c0900c8..4789e669c258 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
@@ -82,21 +82,14 @@ static int fops_vcodec_open(struct file *file)
 {
 	struct mtk_vcodec_dev *dev = video_drvdata(file);
 	struct mtk_vcodec_ctx *ctx = NULL;
-	struct mtk_video_dec_buf *mtk_buf = NULL;
 	int ret = 0;
 	struct vb2_queue *src_vq;
 
 	ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
 	if (!ctx)
 		return -ENOMEM;
-	mtk_buf = kzalloc(sizeof(*mtk_buf), GFP_KERNEL);
-	if (!mtk_buf) {
-		kfree(ctx);
-		return -ENOMEM;
-	}
 
 	mutex_lock(&dev->dev_mutex);
-	ctx->empty_flush_buf = mtk_buf;
 	ctx->id = dev->id_counter++;
 	v4l2_fh_init(&ctx->fh, video_devdata(file));
 	file->private_data = &ctx->fh;
@@ -122,8 +115,7 @@ static int fops_vcodec_open(struct file *file)
 	}
 	src_vq = v4l2_m2m_get_vq(ctx->m2m_ctx,
 				V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE);
-	ctx->empty_flush_buf->m2m_buf.vb.vb2_buf.vb2_queue = src_vq;
-	ctx->empty_flush_buf->lastframe = true;
+	ctx->empty_flush_buf.vb.vb2_buf.vb2_queue = src_vq;
 	mtk_vcodec_dec_set_default_params(ctx);
 
 	if (v4l2_fh_is_singular(&ctx->fh)) {
@@ -161,7 +153,6 @@ static int fops_vcodec_open(struct file *file)
 err_ctrls_setup:
 	v4l2_fh_del(&ctx->fh);
 	v4l2_fh_exit(&ctx->fh);
-	kfree(ctx->empty_flush_buf);
 	kfree(ctx);
 	mutex_unlock(&dev->dev_mutex);
 
@@ -192,7 +183,6 @@ static int fops_vcodec_release(struct file *file)
 	v4l2_ctrl_handler_free(&ctx->ctrl_hdl);
 
 	list_del_init(&ctx->list);
-	kfree(ctx->empty_flush_buf);
 	kfree(ctx);
 	mutex_unlock(&dev->dev_mutex);
 	return 0;
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateful.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateful.c
index d815125c81a4..1f68d92e5c3a 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateful.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateful.c
@@ -337,8 +337,6 @@ static void mtk_vdec_worker(struct work_struct *work)
 		return;
 	}
 
-	src_buf_info = container_of(src_buf, struct mtk_video_dec_buf,
-				    m2m_buf.vb);
 	dst_buf_info = container_of(dst_buf, struct mtk_video_dec_buf,
 				    m2m_buf.vb);
 
@@ -359,7 +357,7 @@ static void mtk_vdec_worker(struct work_struct *work)
 			pfb->base_y.va, &pfb->base_y.dma_addr,
 			&pfb->base_c.dma_addr, pfb->base_y.size);
 
-	if (src_buf_info->lastframe) {
+	if (src_buf == &ctx->empty_flush_buf.vb) {
 		mtk_v4l2_debug(1, "Got empty flush input buffer.");
 		src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx);
 
@@ -380,6 +378,10 @@ static void mtk_vdec_worker(struct work_struct *work)
 		v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx);
 		return;
 	}
+
+	src_buf_info = container_of(src_buf, struct mtk_video_dec_buf,
+				    m2m_buf.vb);
+
 	buf.va = vb2_plane_vaddr(&src_buf->vb2_buf, 0);
 	buf.dma_addr = vb2_dma_contig_plane_dma_addr(&src_buf->vb2_buf, 0);
 	buf.size = (size_t)src_buf->vb2_buf.planes[0].bytesused;
@@ -459,7 +461,6 @@ static void vb2ops_vdec_stateful_buf_queue(struct vb2_buffer *vb)
 	unsigned int dpbsize = 1, i = 0;
 	struct mtk_vcodec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
 	struct vb2_v4l2_buffer *vb2_v4l2 = NULL;
-	struct mtk_video_dec_buf *buf = NULL;
 	struct mtk_q_data *dst_q_data;
 
 	mtk_v4l2_debug(3, "[%d] (%d) id=%d, vb=%p",
@@ -469,6 +470,8 @@ static void vb2ops_vdec_stateful_buf_queue(struct vb2_buffer *vb)
 	 * check if this buffer is ready to be used after decode
 	 */
 	if (vb->vb2_queue->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		struct mtk_video_dec_buf *buf;
+
 		vb2_v4l2 = to_vb2_v4l2_buffer(vb);
 		buf = container_of(vb2_v4l2, struct mtk_video_dec_buf,
 				   m2m_buf.vb);
@@ -498,8 +501,8 @@ static void vb2ops_vdec_stateful_buf_queue(struct vb2_buffer *vb)
 		mtk_v4l2_err("No src buffer");
 		return;
 	}
-	buf = container_of(src_buf, struct mtk_video_dec_buf, m2m_buf.vb);
-	if (buf->lastframe) {
+
+	if (src_buf == &ctx->empty_flush_buf.vb) {
 		/* This shouldn't happen. Just in case. */
 		mtk_v4l2_err("Invalid flush buffer.");
 		v4l2_m2m_src_buf_remove(ctx->m2m_ctx);
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
index 10edd238c939..c2f4cad6cfc2 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
@@ -13,6 +13,7 @@
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
+#include <media/v4l2-mem2mem.h>
 #include <media/videobuf2-core.h>
 #include "mtk_vcodec_util.h"
 
@@ -249,7 +250,8 @@ struct vdec_pic_info {
  * @decode_work: worker for the decoding
  * @encode_work: worker for the encoding
  * @last_decoded_picinfo: pic information get from latest decode
- * @empty_flush_buf: a fake size-0 capture buffer that indicates flush
+ * @empty_flush_buf: a fake size-0 capture buffer that indicates flush. Only
+ *		     to be used with encoder and stateful decoder.
  * @current_codec: current set input codec, in V4L2 pixel format
  *
  * @colorspace: enum v4l2_colorspace; supplemental to pixelformat
@@ -288,7 +290,7 @@ struct mtk_vcodec_ctx {
 	struct work_struct decode_work;
 	struct work_struct encode_work;
 	struct vdec_pic_info last_decoded_picinfo;
-	struct mtk_video_dec_buf *empty_flush_buf;
+	struct v4l2_m2m_buffer empty_flush_buf;
 
 	u32 current_codec;
 
-- 
2.31.1.498.g6c1eba8ee3d-goog


^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v4 14/15] media: mtk-vcodec: venc: support START and STOP commands
  2021-04-27 11:15 [PATCH v4 00/15] media: mtk-vcodec: support for MT8183 decoder Alexandre Courbot
                   ` (12 preceding siblings ...)
  2021-04-27 11:15 ` [PATCH v4 13/15] media: mtk-vcodec: make flush buffer reusable by encoder Alexandre Courbot
@ 2021-04-27 11:15 ` Alexandre Courbot
  2021-08-04 12:53   ` Dafna Hirschfeld
  2021-04-27 11:15 ` [PATCH v4 15/15] media: mtk-vcodec: venc: make sure buffer exists in list before removing Alexandre Courbot
                   ` (2 subsequent siblings)
  16 siblings, 1 reply; 35+ messages in thread
From: Alexandre Courbot @ 2021-04-27 11:15 UTC (permalink / raw)
  To: Tiffany Lin, Andrew-CT Chen, Rob Herring, Yunfei Dong
  Cc: Mauro Carvalho Chehab, Hans Verkuil, linux-media, linux-kernel,
	linux-mediatek, Alexandre Courbot

The V4L2 encoder specification requires encoders to support the
V4L2_ENC_CMD_START and V4L2_ENC_CMD_STOP commands. Add support for these
to the mtk-vcodec encoder by reusing the same flush buffer as used by
the decoder driver.

Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
---
 .../platform/mtk-vcodec/mtk_vcodec_drv.h      |   2 +
 .../platform/mtk-vcodec/mtk_vcodec_enc.c      | 123 +++++++++++++++++-
 .../platform/mtk-vcodec/mtk_vcodec_enc_drv.c  |   4 +
 3 files changed, 122 insertions(+), 7 deletions(-)

diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
index c2f4cad6cfc2..1b61d722d313 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
@@ -252,6 +252,7 @@ struct vdec_pic_info {
  * @last_decoded_picinfo: pic information get from latest decode
  * @empty_flush_buf: a fake size-0 capture buffer that indicates flush. Only
  *		     to be used with encoder and stateful decoder.
+ * @is_flushing: set to true if flushing is in progress.
  * @current_codec: current set input codec, in V4L2 pixel format
  *
  * @colorspace: enum v4l2_colorspace; supplemental to pixelformat
@@ -291,6 +292,7 @@ struct mtk_vcodec_ctx {
 	struct work_struct encode_work;
 	struct vdec_pic_info last_decoded_picinfo;
 	struct v4l2_m2m_buffer empty_flush_buf;
+	bool is_flushing;
 
 	u32 current_codec;
 
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
index 4831052f475d..8058331dc553 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
@@ -659,6 +659,7 @@ static int vidioc_venc_dqbuf(struct file *file, void *priv,
 			     struct v4l2_buffer *buf)
 {
 	struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv);
+	int ret;
 
 	if (ctx->state == MTK_STATE_ABORT) {
 		mtk_v4l2_err("[%d] Call on QBUF after unrecoverable error",
@@ -666,7 +667,77 @@ static int vidioc_venc_dqbuf(struct file *file, void *priv,
 		return -EIO;
 	}
 
-	return v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf);
+	ret = v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf);
+	if (ret)
+		return ret;
+
+	/*
+	 * Complete flush if the user dequeued the 0-payload LAST buffer.
+	 * We check the payload because a buffer with the LAST flag can also
+	 * be seen during resolution changes. If we happen to be flushing at
+	 * that time, the last buffer before the resolution changes could be
+	 * misinterpreted for the buffer generated by the flush and terminate
+	 * it earlier than we want.
+	 */
+	if (!V4L2_TYPE_IS_OUTPUT(buf->type) &&
+	    buf->flags & V4L2_BUF_FLAG_LAST &&
+	    buf->m.planes[0].bytesused == 0 &&
+	    ctx->is_flushing) {
+		/*
+		 * Last CAPTURE buffer is dequeued, we can allow another flush
+		 * to take place.
+		 */
+		ctx->is_flushing = false;
+	}
+
+	return 0;
+}
+
+static int vidioc_encoder_cmd(struct file *file, void *priv,
+			      struct v4l2_encoder_cmd *cmd)
+{
+	struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv);
+	struct vb2_queue *src_vq, *dst_vq;
+	int ret;
+
+	ret = v4l2_m2m_ioctl_try_encoder_cmd(file, priv, cmd);
+	if (ret)
+		return ret;
+
+	/* Calling START or STOP is invalid if a flush is in progress */
+	if (ctx->is_flushing)
+		return -EBUSY;
+
+	mtk_v4l2_debug(1, "encoder cmd=%u", cmd->cmd);
+
+	dst_vq = v4l2_m2m_get_vq(ctx->m2m_ctx,
+				V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE);
+	switch (cmd->cmd) {
+	case V4L2_ENC_CMD_STOP:
+		src_vq = v4l2_m2m_get_vq(ctx->m2m_ctx,
+				V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE);
+		if (!vb2_is_streaming(src_vq)) {
+			mtk_v4l2_debug(1, "Output stream is off. No need to flush.");
+			return 0;
+		}
+		if (!vb2_is_streaming(dst_vq)) {
+			mtk_v4l2_debug(1, "Capture stream is off. No need to flush.");
+			return 0;
+		}
+		ctx->is_flushing = true;
+		v4l2_m2m_buf_queue(ctx->m2m_ctx, &ctx->empty_flush_buf.vb);
+		v4l2_m2m_try_schedule(ctx->m2m_ctx);
+		break;
+
+	case V4L2_ENC_CMD_START:
+		vb2_clear_last_buffer_dequeued(dst_vq);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
 }
 
 const struct v4l2_ioctl_ops mtk_venc_ioctl_ops = {
@@ -702,6 +773,9 @@ const struct v4l2_ioctl_ops mtk_venc_ioctl_ops = {
 
 	.vidioc_g_selection		= vidioc_venc_g_selection,
 	.vidioc_s_selection		= vidioc_venc_s_selection,
+
+	.vidioc_encoder_cmd		= vidioc_encoder_cmd,
+	.vidioc_try_encoder_cmd		= v4l2_m2m_ioctl_try_encoder_cmd,
 };
 
 static int vb2ops_venc_queue_setup(struct vb2_queue *vq,
@@ -869,9 +943,27 @@ static void vb2ops_venc_stop_streaming(struct vb2_queue *q)
 			dst_buf->vb2_buf.planes[0].bytesused = 0;
 			v4l2_m2m_buf_done(dst_buf, VB2_BUF_STATE_ERROR);
 		}
+		/* STREAMOFF on the CAPTURE queue completes any ongoing flush */
+		if (ctx->is_flushing) {
+			mtk_v4l2_debug(1, "STREAMOFF called while flushing");
+			v4l2_m2m_buf_remove_by_buf(&ctx->m2m_ctx->out_q_ctx,
+						   &ctx->empty_flush_buf.vb);
+			ctx->is_flushing = false;
+		}
 	} else {
-		while ((src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx)))
-			v4l2_m2m_buf_done(src_buf, VB2_BUF_STATE_ERROR);
+		while ((src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx))) {
+			if (src_buf != &ctx->empty_flush_buf.vb)
+				v4l2_m2m_buf_done(src_buf, VB2_BUF_STATE_ERROR);
+		}
+		if (ctx->is_flushing) {
+			/*
+			 * If we are in the middle of a flush, put the flush
+			 * buffer back into the queue so the next CAPTURE
+			 * buffer gets returned with the LAST flag set.
+			 */
+			v4l2_m2m_buf_queue(ctx->m2m_ctx,
+					   &ctx->empty_flush_buf.vb);
+		}
 	}
 
 	if ((q->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE &&
@@ -971,12 +1063,15 @@ static int mtk_venc_param_change(struct mtk_vcodec_ctx *ctx)
 {
 	struct venc_enc_param enc_prm;
 	struct vb2_v4l2_buffer *vb2_v4l2 = v4l2_m2m_next_src_buf(ctx->m2m_ctx);
-	struct mtk_video_enc_buf *mtk_buf =
-			container_of(vb2_v4l2, struct mtk_video_enc_buf,
-				     m2m_buf.vb);
-
+	struct mtk_video_enc_buf *mtk_buf;
 	int ret = 0;
 
+	/* Don't upcast the empty flush buffer */
+	if (vb2_v4l2 == &ctx->empty_flush_buf.vb)
+		return 0;
+
+	mtk_buf = container_of(vb2_v4l2, struct mtk_video_enc_buf, m2m_buf.vb);
+
 	memset(&enc_prm, 0, sizeof(enc_prm));
 	if (mtk_buf->param_change == MTK_ENCODE_PARAM_NONE)
 		return 0;
@@ -1062,6 +1157,20 @@ static void mtk_venc_worker(struct work_struct *work)
 	}
 
 	src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx);
+
+	/*
+	 * If we see the flush buffer, send an empty buffer with the LAST flag
+	 * to the client. is_flushing will be reset at the time the buffer
+	 * is dequeued.
+	 */
+	if (src_buf == &ctx->empty_flush_buf.vb) {
+		vb2_set_plane_payload(&dst_buf->vb2_buf, 0, 0);
+		dst_buf->flags |= V4L2_BUF_FLAG_LAST;
+		v4l2_m2m_buf_done(dst_buf, VB2_BUF_STATE_DONE);
+		v4l2_m2m_job_finish(ctx->dev->m2m_dev_enc, ctx->m2m_ctx);
+		return;
+	}
+
 	memset(&frm_buf, 0, sizeof(frm_buf));
 	for (i = 0; i < src_buf->vb2_buf.num_planes ; i++) {
 		frm_buf.fb_addr[i].dma_addr =
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c
index 7d7b8cfc2cc5..2dd6fef896df 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c
@@ -131,6 +131,7 @@ static int fops_vcodec_open(struct file *file)
 	struct mtk_vcodec_dev *dev = video_drvdata(file);
 	struct mtk_vcodec_ctx *ctx = NULL;
 	int ret = 0;
+	struct vb2_queue *src_vq;
 
 	ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
 	if (!ctx)
@@ -164,6 +165,9 @@ static int fops_vcodec_open(struct file *file)
 				ret);
 		goto err_m2m_ctx_init;
 	}
+	src_vq = v4l2_m2m_get_vq(ctx->m2m_ctx,
+				V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE);
+	ctx->empty_flush_buf.vb.vb2_buf.vb2_queue = src_vq;
 	mtk_vcodec_enc_set_default_params(ctx);
 
 	if (v4l2_fh_is_singular(&ctx->fh)) {
-- 
2.31.1.498.g6c1eba8ee3d-goog


^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v4 15/15] media: mtk-vcodec: venc: make sure buffer exists in list before removing
  2021-04-27 11:15 [PATCH v4 00/15] media: mtk-vcodec: support for MT8183 decoder Alexandre Courbot
                   ` (13 preceding siblings ...)
  2021-04-27 11:15 ` [PATCH v4 14/15] media: mtk-vcodec: venc: support START and STOP commands Alexandre Courbot
@ 2021-04-27 11:15 ` Alexandre Courbot
  2021-04-29  7:35 ` [PATCH v4 00/15] media: mtk-vcodec: support for MT8183 decoder Hans Verkuil
  2021-04-29 12:07 ` Dafna Hirschfeld
  16 siblings, 0 replies; 35+ messages in thread
From: Alexandre Courbot @ 2021-04-27 11:15 UTC (permalink / raw)
  To: Tiffany Lin, Andrew-CT Chen, Rob Herring, Yunfei Dong
  Cc: Mauro Carvalho Chehab, Hans Verkuil, linux-media, linux-kernel,
	linux-mediatek, Hsin-Yi Wang, Alexandre Courbot

From: Hsin-Yi Wang <hsinyi@chromium.org>

It is possible that empty_flush_buf is removed in mtk_venc_worker() and
then again in vb2ops_venc_stop_streaming(). However, there's no empty
list check in v4l2_m2m_buf_remove_by_buf(). Double remove causes a
kernel crash.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
[acourbot: fix commit log a bit]
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
---
 .../media/platform/mtk-vcodec/mtk_vcodec_enc.c   | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
index 8058331dc553..4701dea251ca 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
@@ -945,9 +945,21 @@ static void vb2ops_venc_stop_streaming(struct vb2_queue *q)
 		}
 		/* STREAMOFF on the CAPTURE queue completes any ongoing flush */
 		if (ctx->is_flushing) {
+			struct v4l2_m2m_buffer *b, *n;
+
 			mtk_v4l2_debug(1, "STREAMOFF called while flushing");
-			v4l2_m2m_buf_remove_by_buf(&ctx->m2m_ctx->out_q_ctx,
-						   &ctx->empty_flush_buf.vb);
+			/*
+			 * STREAMOFF could be called before the flush buffer is
+			 * dequeued. Check whether empty flush buf is still in
+			 * queue before removing it.
+			 */
+			v4l2_m2m_for_each_src_buf_safe(ctx->m2m_ctx, b, n) {
+				if (b == &ctx->empty_flush_buf) {
+					v4l2_m2m_src_buf_remove_by_buf(
+							ctx->m2m_ctx, &b->vb);
+					break;
+				}
+			}
 			ctx->is_flushing = false;
 		}
 	} else {
-- 
2.31.1.498.g6c1eba8ee3d-goog


^ permalink raw reply related	[flat|nested] 35+ messages in thread

* Re: [PATCH v4 04/15] media: add Mediatek's MM21 format
  2021-04-27 11:15 ` [PATCH v4 04/15] media: add Mediatek's MM21 format Alexandre Courbot
@ 2021-04-29  7:16   ` Hans Verkuil
  0 siblings, 0 replies; 35+ messages in thread
From: Hans Verkuil @ 2021-04-29  7:16 UTC (permalink / raw)
  To: Alexandre Courbot, Tiffany Lin, Andrew-CT Chen, Rob Herring, Yunfei Dong
  Cc: Mauro Carvalho Chehab, linux-media, linux-kernel, linux-mediatek

On 27/04/2021 13:15, Alexandre Courbot wrote:
> Add Mediatek's non-compressed 8 bit block video mode. This format is
> produced by the MT8183 codec and can be converted to a non-proprietary
> format by the MDP3 component.
> 
> Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
> ---
>  Documentation/userspace-api/media/v4l/pixfmt-reserved.rst | 7 +++++++
>  drivers/media/v4l2-core/v4l2-ioctl.c                      | 1 +
>  include/uapi/linux/videodev2.h                            | 1 +
>  3 files changed, 9 insertions(+)
> 
> diff --git a/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst b/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst
> index 0b879c0da713..42357b0b3535 100644
> --- a/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst
> +++ b/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst
> @@ -246,6 +246,13 @@ please make a proposal on the linux-media mailing list.
>  	It is an opaque intermediate format and the MDP hardware must be
>  	used to convert ``V4L2_PIX_FMT_MT21C`` to ``V4L2_PIX_FMT_NV12M``,
>  	``V4L2_PIX_FMT_YUV420M`` or ``V4L2_PIX_FMT_YVU420``.
> +    * .. _V4L2-PIX-FMT-MM21:
> +
> +      - ``V4L2_PIX_FMT_MM21``
> +      - 'MM21'
> +      - Non-compressed, tiled two-planar format used by Mediatek MT8183.
> +	This is an opaque intermediate format and the MDP3 hardware can be
> +	used to convert it to other formats.
>      * .. _V4L2-PIX-FMT-SUNXI-TILED-NV12:
>  
>        - ``V4L2_PIX_FMT_SUNXI_TILED_NV12``
> diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
> index 6a5d1c6d11d6..608e3ddc0f42 100644
> --- a/drivers/media/v4l2-core/v4l2-ioctl.c
> +++ b/drivers/media/v4l2-core/v4l2-ioctl.c
> @@ -1385,6 +1385,7 @@ static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt)
>  	case V4L2_PIX_FMT_TM6000:	descr = "A/V + VBI Mux Packet"; break;
>  	case V4L2_PIX_FMT_CIT_YYVYUY:	descr = "GSPCA CIT YYVYUY"; break;
>  	case V4L2_PIX_FMT_KONICA420:	descr = "GSPCA KONICA420"; break;
> +	case V4L2_PIX_FMT_MM21:		descr = "Mediatek 8-bit block format"; break;

block format -> Block Format

(to be consistent with the other descriptions)

Regards,

	Hans

>  	case V4L2_PIX_FMT_HSV24:	descr = "24-bit HSV 8-8-8"; break;
>  	case V4L2_PIX_FMT_HSV32:	descr = "32-bit XHSV 8-8-8-8"; break;
>  	case V4L2_SDR_FMT_CU8:		descr = "Complex U8"; break;
> diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
> index 311a01cc5775..db04e37da1a8 100644
> --- a/include/uapi/linux/videodev2.h
> +++ b/include/uapi/linux/videodev2.h
> @@ -733,6 +733,7 @@ struct v4l2_pix_format {
>  #define V4L2_PIX_FMT_Y12I     v4l2_fourcc('Y', '1', '2', 'I') /* Greyscale 12-bit L/R interleaved */
>  #define V4L2_PIX_FMT_Z16      v4l2_fourcc('Z', '1', '6', ' ') /* Depth data 16-bit */
>  #define V4L2_PIX_FMT_MT21C    v4l2_fourcc('M', 'T', '2', '1') /* Mediatek compressed block mode  */
> +#define V4L2_PIX_FMT_MM21     v4l2_fourcc('M', 'M', '2', '1') /* Mediatek 8-bit block mode, two non-contiguous planes */
>  #define V4L2_PIX_FMT_INZI     v4l2_fourcc('I', 'N', 'Z', 'I') /* Intel Planar Greyscale 10-bit and Depth 16-bit */
>  #define V4L2_PIX_FMT_SUNXI_TILED_NV12 v4l2_fourcc('S', 'T', '1', '2') /* Sunxi Tiled NV12 Format */
>  #define V4L2_PIX_FMT_CNF4     v4l2_fourcc('C', 'N', 'F', '4') /* Intel 4-bit packed depth confidence information */
> 


^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v4 05/15] media: mtk-vcodec: vdec: support stateless API
  2021-04-27 11:15 ` [PATCH v4 05/15] media: mtk-vcodec: vdec: support stateless API Alexandre Courbot
@ 2021-04-29  7:27   ` Hans Verkuil
  2021-05-13  9:20     ` Alexandre Courbot
  2021-04-29 12:10   ` Dafna Hirschfeld
  1 sibling, 1 reply; 35+ messages in thread
From: Hans Verkuil @ 2021-04-29  7:27 UTC (permalink / raw)
  To: Alexandre Courbot, Tiffany Lin, Andrew-CT Chen, Rob Herring, Yunfei Dong
  Cc: Mauro Carvalho Chehab, linux-media, linux-kernel, linux-mediatek

On 27/04/2021 13:15, Alexandre Courbot wrote:
> From: Yunfei Dong <yunfei.dong@mediatek.com>
> 
> Support the stateless codec API that will be used by MT8183.
> 
> Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
> [acourbot: refactor, cleanup and split]
> Co-developed-by: Alexandre Courbot <acourbot@chromium.org>
> Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
> ---
>  drivers/media/platform/mtk-vcodec/Makefile    |   1 +
>  .../platform/mtk-vcodec/mtk_vcodec_dec.c      |  66 +++-
>  .../platform/mtk-vcodec/mtk_vcodec_dec.h      |   9 +-
>  .../mtk-vcodec/mtk_vcodec_dec_stateless.c     | 370 ++++++++++++++++++
>  .../platform/mtk-vcodec/mtk_vcodec_drv.h      |   3 +
>  5 files changed, 446 insertions(+), 3 deletions(-)
>  create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c
> 
> diff --git a/drivers/media/platform/mtk-vcodec/Makefile b/drivers/media/platform/mtk-vcodec/Makefile
> index 9c3cbb5b800e..4ba93d838ab6 100644
> --- a/drivers/media/platform/mtk-vcodec/Makefile
> +++ b/drivers/media/platform/mtk-vcodec/Makefile
> @@ -12,6 +12,7 @@ mtk-vcodec-dec-y := vdec/vdec_h264_if.o \
>  		vdec_vpu_if.o \
>  		mtk_vcodec_dec.o \
>  		mtk_vcodec_dec_stateful.o \
> +		mtk_vcodec_dec_stateless.o \
>  		mtk_vcodec_dec_pm.o \
>  
>  mtk-vcodec-enc-y := venc/venc_vp8_if.o \
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
> index 4ad2662a43b2..01c5333d6cff 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
> @@ -46,6 +46,13 @@ static struct mtk_q_data *mtk_vdec_get_q_data(struct mtk_vcodec_ctx *ctx,
>  static int vidioc_try_decoder_cmd(struct file *file, void *priv,
>  				struct v4l2_decoder_cmd *cmd)
>  {
> +	struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv);
> +
> +	/* Use M2M stateless helper if relevant */
> +	if (ctx->dev->vdec_pdata->uses_stateless_api)
> +		return v4l2_m2m_ioctl_stateless_try_decoder_cmd(file, priv,
> +								cmd);
> +
>  	switch (cmd->cmd) {
>  	case V4L2_DEC_CMD_STOP:
>  	case V4L2_DEC_CMD_START:
> @@ -72,6 +79,10 @@ static int vidioc_decoder_cmd(struct file *file, void *priv,
>  	if (ret)
>  		return ret;
>  
> +	/* Use M2M stateless helper if relevant */
> +	if (ctx->dev->vdec_pdata->uses_stateless_api)
> +		return v4l2_m2m_ioctl_stateless_decoder_cmd(file, priv, cmd);
> +
>  	mtk_v4l2_debug(1, "decoder cmd=%u", cmd->cmd);
>  	dst_vq = v4l2_m2m_get_vq(ctx->m2m_ctx,
>  				V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE);
> @@ -414,7 +425,8 @@ static int vidioc_vdec_s_fmt(struct file *file, void *priv,
>  	 * Setting OUTPUT format after OUTPUT buffers are allocated is invalid
>  	 * if using the stateful API.
>  	 */
> -	if ((f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) &&
> +	if (!dec_pdata->uses_stateless_api &&
> +	    (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) &&
>  	    vb2_is_busy(&ctx->m2m_ctx->out_q_ctx.q)) {
>  		mtk_v4l2_err("out_q_ctx buffers already requested");
>  		ret = -EBUSY;
> @@ -457,6 +469,7 @@ static int vidioc_vdec_s_fmt(struct file *file, void *priv,
>  		ctx->quantization = pix_mp->quantization;
>  		ctx->xfer_func = pix_mp->xfer_func;
>  
> +		ctx->current_codec = fmt->fourcc;
>  		if (ctx->state == MTK_STATE_FREE) {
>  			ret = vdec_if_init(ctx, q_data->fmt->fourcc);
>  			if (ret) {
> @@ -468,6 +481,49 @@ static int vidioc_vdec_s_fmt(struct file *file, void *priv,
>  		}
>  	}
>  
> +	/*
> +	 * If using the stateless API, S_FMT should have the effect of setting
> +	 * the CAPTURE queue resolution no matter which queue it was called on.
> +	 */
> +	if (dec_pdata->uses_stateless_api) {
> +		ctx->picinfo.pic_w = pix_mp->width;
> +		ctx->picinfo.pic_h = pix_mp->height;
> +
> +		ret = vdec_if_get_param(ctx, GET_PARAM_PIC_INFO, &ctx->picinfo);
> +		if (ret) {
> +			mtk_v4l2_err("[%d]Error!! Get GET_PARAM_PICTURE_INFO Fail",
> +				ctx->id);
> +			return -EINVAL;
> +		}
> +
> +		ctx->last_decoded_picinfo = ctx->picinfo;
> +
> +		if (ctx->q_data[MTK_Q_DATA_DST].fmt->num_planes == 1) {
> +			ctx->q_data[MTK_Q_DATA_DST].sizeimage[0] =
> +				ctx->picinfo.fb_sz[0] +
> +				ctx->picinfo.fb_sz[1];
> +			ctx->q_data[MTK_Q_DATA_DST].bytesperline[0] =
> +				ctx->picinfo.buf_w;
> +		} else {
> +			ctx->q_data[MTK_Q_DATA_DST].sizeimage[0] =
> +				ctx->picinfo.fb_sz[0];
> +			ctx->q_data[MTK_Q_DATA_DST].bytesperline[0] =
> +				ctx->picinfo.buf_w;
> +			ctx->q_data[MTK_Q_DATA_DST].sizeimage[1] =
> +				ctx->picinfo.fb_sz[1];
> +			ctx->q_data[MTK_Q_DATA_DST].bytesperline[1] =
> +				ctx->picinfo.buf_w;
> +		}
> +
> +		ctx->q_data[MTK_Q_DATA_DST].coded_width = ctx->picinfo.buf_w;
> +		ctx->q_data[MTK_Q_DATA_DST].coded_height = ctx->picinfo.buf_h;
> +		mtk_v4l2_debug(2, "[%d] vdec_if_init() num_plane = %d wxh=%dx%d pic wxh=%dx%d sz[0]=0x%x sz[1]=0x%x",
> +			ctx->id, pix_mp->num_planes,
> +			ctx->picinfo.buf_w, ctx->picinfo.buf_h,
> +			ctx->picinfo.pic_w, ctx->picinfo.pic_h,
> +			ctx->q_data[MTK_Q_DATA_DST].sizeimage[0],
> +			ctx->q_data[MTK_Q_DATA_DST].sizeimage[1]);
> +	}
>  	return 0;
>  }
>  
> @@ -765,9 +821,15 @@ void vb2ops_vdec_stop_streaming(struct vb2_queue *q)
>  		while ((src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx))) {
>  			struct mtk_video_dec_buf *buf_info = container_of(
>  				 src_buf, struct mtk_video_dec_buf, m2m_buf.vb);
> -			if (!buf_info->lastframe)
> +			if (!buf_info->lastframe) {
> +				struct media_request *req =
> +					src_buf->vb2_buf.req_obj.req;
>  				v4l2_m2m_buf_done(src_buf,
>  						VB2_BUF_STATE_ERROR);
> +				if (req)
> +					v4l2_ctrl_request_complete(req,
> +								&ctx->ctrl_hdl);
> +			}
>  		}
>  		return;
>  	}
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h
> index 6a18cb3bfe07..6b29d7d9ae15 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h
> @@ -45,6 +45,7 @@ struct vdec_fb {
>   * @lastframe:		Intput buffer is last buffer - EOS
>   * @error:		An unrecoverable error occurs on this buffer.
>   * @frame_buffer:	Decode status, and buffer information of Capture buffer
> + * @bs_buffer:	Output buffer info
>   *
>   * Note : These status information help us track and debug buffer state
>   */
> @@ -55,12 +56,18 @@ struct mtk_video_dec_buf {
>  	bool	queued_in_vb2;
>  	bool	queued_in_v4l2;
>  	bool	lastframe;
> +
>  	bool	error;
> -	struct vdec_fb	frame_buffer;
> +
> +	union {
> +		struct vdec_fb	frame_buffer;
> +		struct mtk_vcodec_mem	bs_buffer;
> +	};
>  };
>  
>  extern const struct v4l2_ioctl_ops mtk_vdec_ioctl_ops;
>  extern const struct v4l2_m2m_ops mtk_vdec_m2m_ops;
> +extern const struct media_device_ops mtk_vcodec_media_ops;
>  
>  
>  /*
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c
> new file mode 100644
> index 000000000000..75ddf53e2876
> --- /dev/null
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c
> @@ -0,0 +1,370 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +#include "media/videobuf2-v4l2.h"
> +#include <media/videobuf2-dma-contig.h>
> +#include <media/v4l2-event.h>
> +#include <media/v4l2-mem2mem.h>
> +#include <linux/module.h>
> +
> +#include "mtk_vcodec_drv.h"
> +#include "mtk_vcodec_dec.h"
> +#include "mtk_vcodec_intr.h"
> +#include "mtk_vcodec_util.h"
> +#include "vdec_drv_if.h"
> +#include "mtk_vcodec_dec_pm.h"
> +
> +/**
> + * struct mtk_stateless_control  - CID control type
> + * @cfg: control configuration
> + * @codec_type: codec type (V4L2 pixel format) for CID control type
> + */
> +struct mtk_stateless_control {
> +	struct v4l2_ctrl_config cfg;
> +	int codec_type;
> +};
> +
> +static const struct mtk_stateless_control mtk_stateless_controls[] = {
> +	{
> +		.cfg = {
> +			.id = V4L2_CID_STATELESS_H264_SPS,
> +		},
> +		.codec_type = V4L2_PIX_FMT_H264_SLICE,
> +	},
> +	{
> +		.cfg = {
> +			.id = V4L2_CID_STATELESS_H264_PPS,
> +		},
> +		.codec_type = V4L2_PIX_FMT_H264_SLICE,
> +	},
> +	{
> +		.cfg = {
> +			.id = V4L2_CID_STATELESS_H264_SCALING_MATRIX,
> +		},
> +		.codec_type = V4L2_PIX_FMT_H264_SLICE,
> +	},
> +	{
> +		.cfg = {
> +			.id = V4L2_CID_STATELESS_H264_DECODE_PARAMS,
> +		},
> +		.codec_type = V4L2_PIX_FMT_H264_SLICE,
> +	},
> +	{
> +		.cfg = {
> +			.id = V4L2_CID_MPEG_VIDEO_H264_PROFILE,
> +			.def = V4L2_MPEG_VIDEO_H264_PROFILE_MAIN,
> +			.max = V4L2_MPEG_VIDEO_H264_PROFILE_HIGH,
> +			.menu_skip_mask =
> +				BIT(V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE) |
> +				BIT(V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED),
> +		},
> +		.codec_type = V4L2_PIX_FMT_H264_SLICE,
> +	},
> +	{
> +		.cfg = {
> +			.id = V4L2_CID_STATELESS_H264_DECODE_MODE,
> +			.min = V4L2_STATELESS_H264_DECODE_MODE_FRAME_BASED,
> +			.def = V4L2_STATELESS_H264_DECODE_MODE_FRAME_BASED,
> +			.max = V4L2_STATELESS_H264_DECODE_MODE_FRAME_BASED,
> +		},
> +		.codec_type = V4L2_PIX_FMT_H264_SLICE,
> +	},
> +	{
> +		.cfg = {
> +			.id = V4L2_CID_STATELESS_H264_START_CODE,
> +			.min = V4L2_STATELESS_H264_START_CODE_ANNEX_B,
> +			.def = V4L2_STATELESS_H264_START_CODE_ANNEX_B,
> +			.max = V4L2_STATELESS_H264_START_CODE_ANNEX_B,
> +		},
> +		.codec_type = V4L2_PIX_FMT_H264_SLICE,
> +	}
> +};
> +#define NUM_CTRLS ARRAY_SIZE(mtk_stateless_controls)
> +
> +static const struct mtk_video_fmt mtk_video_formats[] = {
> +	{
> +		.fourcc = V4L2_PIX_FMT_H264_SLICE,
> +		.type = MTK_FMT_DEC,
> +		.num_planes = 1,
> +	},
> +	{
> +		.fourcc = V4L2_PIX_FMT_MM21,
> +		.type = MTK_FMT_FRAME,
> +		.num_planes = 2,
> +	},
> +};
> +#define NUM_FORMATS ARRAY_SIZE(mtk_video_formats)
> +#define DEFAULT_OUT_FMT_IDX    0
> +#define DEFAULT_CAP_FMT_IDX    1
> +
> +static const struct mtk_codec_framesizes mtk_vdec_framesizes[] = {
> +	{
> +		.fourcc	= V4L2_PIX_FMT_H264_SLICE,
> +		.stepwise = {  MTK_VDEC_MIN_W, MTK_VDEC_MAX_W, 16,
> +				MTK_VDEC_MIN_H, MTK_VDEC_MAX_H, 16 },
> +	},
> +};
> +
> +#define NUM_SUPPORTED_FRAMESIZE ARRAY_SIZE(mtk_vdec_framesizes)
> +
> +static void mtk_vdec_stateless_set_dst_payload(struct mtk_vcodec_ctx *ctx,
> +					       struct vdec_fb *fb)
> +{
> +	struct mtk_video_dec_buf *vdec_frame_buf =
> +		container_of(fb, struct mtk_video_dec_buf, frame_buffer);
> +	struct vb2_v4l2_buffer *vb = &vdec_frame_buf->m2m_buf.vb;
> +	unsigned int cap_y_size = ctx->q_data[MTK_Q_DATA_DST].sizeimage[0];
> +
> +	vb2_set_plane_payload(&vb->vb2_buf, 0, cap_y_size);
> +	if (ctx->q_data[MTK_Q_DATA_DST].fmt->num_planes == 2) {
> +		unsigned int cap_c_size =
> +			ctx->q_data[MTK_Q_DATA_DST].sizeimage[1];
> +
> +		vb2_set_plane_payload(&vb->vb2_buf, 1, cap_c_size);
> +	}
> +}
> +
> +static struct vdec_fb *vdec_get_cap_buffer(struct mtk_vcodec_ctx *ctx,
> +					   struct vb2_v4l2_buffer *vb2_v4l2)
> +{
> +	struct mtk_video_dec_buf *framebuf =
> +		container_of(vb2_v4l2, struct mtk_video_dec_buf, m2m_buf.vb);
> +	struct vdec_fb *pfb = &framebuf->frame_buffer;
> +	struct vb2_buffer *dst_buf = &vb2_v4l2->vb2_buf;
> +
> +	pfb = &framebuf->frame_buffer;
> +	pfb->base_y.va = NULL;
> +	pfb->base_y.dma_addr = vb2_dma_contig_plane_dma_addr(dst_buf, 0);
> +	pfb->base_y.size = ctx->q_data[MTK_Q_DATA_DST].sizeimage[0];
> +
> +	if (ctx->q_data[MTK_Q_DATA_DST].fmt->num_planes == 2) {
> +		pfb->base_c.va = NULL;
> +		pfb->base_c.dma_addr =
> +			vb2_dma_contig_plane_dma_addr(dst_buf, 1);
> +		pfb->base_c.size = ctx->q_data[MTK_Q_DATA_DST].sizeimage[1];
> +	}
> +	mtk_v4l2_debug(1,
> +		"id=%d Framebuf  pfb=%p VA=%p Y_DMA=%pad C_DMA=%pad Size=%zx frame_count = %d",
> +		dst_buf->index, pfb,
> +		pfb->base_y.va, &pfb->base_y.dma_addr,
> +		&pfb->base_c.dma_addr, pfb->base_y.size,
> +		ctx->decoded_frame_cnt);
> +
> +	return pfb;
> +}
> +
> +static void vb2ops_vdec_buf_request_complete(struct vb2_buffer *vb)
> +{
> +	struct mtk_vcodec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
> +
> +	v4l2_ctrl_request_complete(vb->req_obj.req, &ctx->ctrl_hdl);
> +}
> +
> +static int fops_media_request_validate(struct media_request *mreq)

I think this function should be moved to just before mtk_vcodec_media_ops.
It's a bit weird to have this in the middle of the code.

> +{
> +	const unsigned int buffer_cnt = vb2_request_buffer_cnt(mreq);
> +
> +	switch (buffer_cnt) {
> +	case 1:
> +		/* We expect exactly one buffer with the request */
> +		break;
> +	case 0:
> +		mtk_v4l2_err("No buffer provided with the request");
> +		return -ENOENT;
> +	default:
> +		mtk_v4l2_err("Too many buffers (%d) provided with the request",
> +			     buffer_cnt);

These aren't errors: user errors are not something that should be reported
in the kernel log, only driver/hw errors should be reported there.

Use _debug instead.

> +		return -EINVAL;
> +	}
> +
> +	return vb2_request_validate(mreq);
> +}
> +
> +static void mtk_vdec_worker(struct work_struct *work)
> +{
> +	struct mtk_vcodec_ctx *ctx =
> +		container_of(work, struct mtk_vcodec_ctx, decode_work);
> +	struct mtk_vcodec_dev *dev = ctx->dev;
> +	struct vb2_v4l2_buffer *vb2_v4l2_src, *vb2_v4l2_dst;
> +	struct vb2_buffer *vb2_src;
> +	struct mtk_vcodec_mem *bs_src;
> +	struct mtk_video_dec_buf *dec_buf_src;
> +	struct media_request *src_buf_req;
> +	struct vdec_fb *dst_buf;
> +	bool res_chg = false;
> +	int ret;
> +
> +	vb2_v4l2_src = v4l2_m2m_next_src_buf(ctx->m2m_ctx);
> +	if (vb2_v4l2_src == NULL) {
> +		v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx);
> +		mtk_v4l2_debug(1, "[%d] no available source buffer", ctx->id);
> +		return;
> +	}
> +
> +	vb2_v4l2_dst = v4l2_m2m_next_dst_buf(ctx->m2m_ctx);
> +	if (vb2_v4l2_dst == NULL) {
> +		v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx);
> +		mtk_v4l2_debug(1, "[%d] no available destination buffer", ctx->id);
> +		return;
> +	}
> +
> +	vb2_src = &vb2_v4l2_src->vb2_buf;
> +	dec_buf_src = container_of(vb2_v4l2_src, struct mtk_video_dec_buf,
> +				   m2m_buf.vb);
> +	bs_src = &dec_buf_src->bs_buffer;
> +
> +	mtk_v4l2_debug(3, "[%d] (%d) id=%d, vb=%p buf_info = %p",
> +			ctx->id, src_buf->vb2_queue->type,
> +			src_buf->index, src_buf, src_buf_info);
> +
> +	bs_src->va = NULL;
> +	bs_src->dma_addr = vb2_dma_contig_plane_dma_addr(vb2_src, 0);
> +	bs_src->size = (size_t)vb2_src->planes[0].bytesused;
> +
> +	mtk_v4l2_debug(3, "[%d] Bitstream VA=%p DMA=%pad Size=%zx vb=%p",
> +			ctx->id, buf->va, &buf->dma_addr, buf->size, src_buf);
> +	/* Apply request controls. */
> +	src_buf_req = vb2_src->req_obj.req;
> +	if (src_buf_req)
> +		v4l2_ctrl_request_setup(src_buf_req, &ctx->ctrl_hdl);
> +	else
> +		mtk_v4l2_err("vb2 buffer media request is NULL");
> +
> +	dst_buf = vdec_get_cap_buffer(ctx, vb2_v4l2_dst);
> +	v4l2_m2m_buf_copy_metadata(vb2_v4l2_src, vb2_v4l2_dst, true);
> +	ret = vdec_if_decode(ctx, bs_src, dst_buf, &res_chg);
> +	if (ret) {
> +		mtk_v4l2_err(
> +			" <===[%d], src_buf[%d] sz=0x%zx pts=%llu vdec_if_decode() ret=%d res_chg=%d===>",
> +			ctx->id, vb2_src->index, bs_src->size,
> +			vb2_src->timestamp, ret, res_chg);
> +		if (ret == -EIO) {
> +			mutex_lock(&ctx->lock);
> +			dec_buf_src->error = true;
> +			mutex_unlock(&ctx->lock);
> +		}
> +	}
> +
> +	mtk_vdec_stateless_set_dst_payload(ctx, dst_buf);
> +
> +	v4l2_m2m_buf_done_and_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx,
> +		ret ? VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
> +
> +	v4l2_ctrl_request_complete(src_buf_req, &ctx->ctrl_hdl);
> +}
> +
> +static void vb2ops_vdec_stateless_buf_queue(struct vb2_buffer *vb)
> +{
> +	struct mtk_vcodec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
> +	struct vb2_v4l2_buffer *vb2_v4l2 = to_vb2_v4l2_buffer(vb);
> +
> +	mtk_v4l2_debug(3, "[%d] (%d) id=%d, vb=%p",
> +			ctx->id, vb->vb2_queue->type,
> +			vb->index, vb);
> +
> +	mutex_lock(&ctx->lock);
> +	v4l2_m2m_buf_queue(ctx->m2m_ctx, vb2_v4l2);
> +	mutex_unlock(&ctx->lock);
> +	if (vb->vb2_queue->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
> +		return;
> +
> +	mtk_v4l2_debug(3, "(%d) id=%d, bs=%p",
> +		vb->vb2_queue->type, vb->index, src_buf);
> +
> +	/* If an OUTPUT buffer, we may need to update the state */
> +	if (ctx->state == MTK_STATE_INIT) {
> +		ctx->state = MTK_STATE_HEADER;
> +		mtk_v4l2_debug(1, "Init driver from init to header.");
> +	} else {
> +		mtk_v4l2_debug(3, "[%d] already init driver %d",
> +				ctx->id, ctx->state);
> +	}
> +}
> +
> +static int mtk_vdec_flush_decoder(struct mtk_vcodec_ctx *ctx)
> +{
> +	bool res_chg;
> +
> +	return vdec_if_decode(ctx, NULL, NULL, &res_chg);
> +}
> +
> +static int mtk_vcodec_dec_ctrls_setup(struct mtk_vcodec_ctx *ctx)
> +{
> +	unsigned int i;
> +
> +	v4l2_ctrl_handler_init(&ctx->ctrl_hdl, NUM_CTRLS);
> +	if (ctx->ctrl_hdl.error) {
> +		mtk_v4l2_err("v4l2_ctrl_handler_init failed\n");
> +		return ctx->ctrl_hdl.error;
> +	}
> +
> +	for (i = 0; i < NUM_CTRLS; i++) {
> +		struct v4l2_ctrl_config cfg = mtk_stateless_controls[i].cfg;
> +
> +		v4l2_ctrl_new_custom(&ctx->ctrl_hdl, &cfg, NULL);
> +		if (ctx->ctrl_hdl.error) {
> +			mtk_v4l2_err("Adding control %d failed %d",
> +					i, ctx->ctrl_hdl.error);
> +			return ctx->ctrl_hdl.error;
> +		}
> +	}
> +
> +	v4l2_ctrl_handler_setup(&ctx->ctrl_hdl);
> +
> +	return 0;
> +}
> +
> +const struct media_device_ops mtk_vcodec_media_ops = {
> +	.req_validate	= fops_media_request_validate,
> +	.req_queue	= v4l2_m2m_request_queue,
> +};
> +
> +static void mtk_init_vdec_params(struct mtk_vcodec_ctx *ctx)
> +{
> +	struct vb2_queue *src_vq;
> +
> +	src_vq = v4l2_m2m_get_vq(ctx->m2m_ctx,
> +				 V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE);
> +
> +	/* Support request api for output plane */
> +	src_vq->supports_requests = true;
> +	src_vq->requires_requests = true;
> +}
> +
> +static int vb2ops_vdec_out_buf_validate(struct vb2_buffer *vb)
> +{
> +	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> +
> +	vbuf->field = V4L2_FIELD_NONE;
> +	return 0;
> +}
> +
> +static struct vb2_ops mtk_vdec_request_vb2_ops = {
> +	.queue_setup	= vb2ops_vdec_queue_setup,
> +	.buf_prepare	= vb2ops_vdec_buf_prepare,

Should be with the other .buf ops.

> +	.wait_prepare	= vb2_ops_wait_prepare,
> +	.wait_finish	= vb2_ops_wait_finish,
> +	.start_streaming	= vb2ops_vdec_start_streaming,
> +
> +	.buf_queue	= vb2ops_vdec_stateless_buf_queue,
> +	.buf_out_validate = vb2ops_vdec_out_buf_validate,
> +	.buf_init	= vb2ops_vdec_buf_init,
> +	.buf_finish	= vb2ops_vdec_buf_finish,
> +	.stop_streaming	= vb2ops_vdec_stop_streaming,

Shouldn't stop_streaming be just after .start_streaming? It's weird to see
them separated by other ops.

> +	.buf_request_complete = vb2ops_vdec_buf_request_complete,
> +};
> +
> +const struct mtk_vcodec_dec_pdata mtk_vdec_8183_pdata = {
> +	.chip = MTK_MT8183,
> +	.init_vdec_params = mtk_init_vdec_params,
> +	.ctrls_setup = mtk_vcodec_dec_ctrls_setup,
> +	.vdec_vb2_ops = &mtk_vdec_request_vb2_ops,
> +	.vdec_formats = mtk_video_formats,
> +	.num_formats = NUM_FORMATS,
> +	.default_out_fmt = &mtk_video_formats[DEFAULT_OUT_FMT_IDX],
> +	.default_cap_fmt = &mtk_video_formats[DEFAULT_CAP_FMT_IDX],
> +	.vdec_framesizes = mtk_vdec_framesizes,
> +	.num_framesizes = NUM_SUPPORTED_FRAMESIZE,
> +	.uses_stateless_api = true,
> +	.worker = mtk_vdec_worker,
> +	.flush_decoder = mtk_vdec_flush_decoder,
> +};
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> index e5b8309785e1..78d4a7728ddf 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> @@ -250,6 +250,7 @@ struct vdec_pic_info {
>   * @encode_work: worker for the encoding
>   * @last_decoded_picinfo: pic information get from latest decode
>   * @empty_flush_buf: a fake size-0 capture buffer that indicates flush
> + * @current_codec: current set input codec, in V4L2 pixel format
>   *
>   * @colorspace: enum v4l2_colorspace; supplemental to pixelformat
>   * @ycbcr_enc: enum v4l2_ycbcr_encoding, Y'CbCr encoding
> @@ -289,6 +290,8 @@ struct mtk_vcodec_ctx {
>  	struct vdec_pic_info last_decoded_picinfo;
>  	struct mtk_video_dec_buf *empty_flush_buf;
>  
> +	u32 current_codec;
> +
>  	enum v4l2_colorspace colorspace;
>  	enum v4l2_ycbcr_encoding ycbcr_enc;
>  	enum v4l2_quantization quantization;
> 

Regards,

	Hans

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v4 07/15] media: mtk-vcodec: vdec: add media device if using stateless api
  2021-04-27 11:15 ` [PATCH v4 07/15] media: mtk-vcodec: vdec: add media device if using stateless api Alexandre Courbot
@ 2021-04-29  7:28   ` Hans Verkuil
  2021-05-13  8:05     ` Alexandre Courbot
  2021-05-17  4:35   ` Hsin-Yi Wang
  1 sibling, 1 reply; 35+ messages in thread
From: Hans Verkuil @ 2021-04-29  7:28 UTC (permalink / raw)
  To: Alexandre Courbot, Tiffany Lin, Andrew-CT Chen, Rob Herring, Yunfei Dong
  Cc: Mauro Carvalho Chehab, linux-media, linux-kernel, linux-mediatek

On 27/04/2021 13:15, Alexandre Courbot wrote:
> From: Yunfei Dong <yunfei.dong@mediatek.com>
> 
> The stateless API requires a media device for issuing requests. Add one
> if we are being instantiated as a stateless decoder.

Why for the stateless decoder only? Why not create one for all?

It's not a blocker, but I would recommend looking at this.

Regards,

	Hans

> 
> Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
> [acourbot: refactor, cleanup and split]
> Co-developed-by: Alexandre Courbot <acourbot@chromium.org>
> Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
> ---
>  drivers/media/platform/Kconfig                |  1 +
>  .../platform/mtk-vcodec/mtk_vcodec_dec_drv.c  | 39 +++++++++++++++++++
>  .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  2 +
>  3 files changed, 42 insertions(+)
> 
> diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
> index ae1468aa1b4e..4154fdec2efb 100644
> --- a/drivers/media/platform/Kconfig
> +++ b/drivers/media/platform/Kconfig
> @@ -315,6 +315,7 @@ config VIDEO_MEDIATEK_VCODEC
>  	select VIDEO_MEDIATEK_VCODEC_VPU if VIDEO_MEDIATEK_VPU
>  	select VIDEO_MEDIATEK_VCODEC_SCP if MTK_SCP
>  	select V4L2_H264
> +	select MEDIA_CONTROLLER
>  	help
>  	  Mediatek video codec driver provides HW capability to
>  	  encode and decode in a range of video formats on MT8173
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
> index 533781d4680a..e942e28f96fe 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
> @@ -14,6 +14,7 @@
>  #include <media/v4l2-event.h>
>  #include <media/v4l2-mem2mem.h>
>  #include <media/videobuf2-dma-contig.h>
> +#include <media/v4l2-device.h>
>  
>  #include "mtk_vcodec_drv.h"
>  #include "mtk_vcodec_dec.h"
> @@ -324,6 +325,31 @@ static int mtk_vcodec_probe(struct platform_device *pdev)
>  		goto err_event_workq;
>  	}
>  
> +	if (dev->vdec_pdata->uses_stateless_api) {
> +		dev->mdev_dec.dev = &pdev->dev;
> +		strscpy(dev->mdev_dec.model, MTK_VCODEC_DEC_NAME,
> +				sizeof(dev->mdev_dec.model));
> +
> +		media_device_init(&dev->mdev_dec);
> +		dev->mdev_dec.ops = &mtk_vcodec_media_ops;
> +		dev->v4l2_dev.mdev = &dev->mdev_dec;
> +
> +		ret = v4l2_m2m_register_media_controller(dev->m2m_dev_dec,
> +			dev->vfd_dec, MEDIA_ENT_F_PROC_VIDEO_DECODER);
> +		if (ret) {
> +			mtk_v4l2_err("Failed to register media controller");
> +			goto err_reg_cont;
> +		}
> +
> +		ret = media_device_register(&dev->mdev_dec);
> +		if (ret) {
> +			mtk_v4l2_err("Failed to register media device");
> +			goto err_media_reg;
> +		}
> +
> +		mtk_v4l2_debug(0, "media registered as /dev/media%d",
> +			vfd_dec->num);
> +	}
>  	ret = video_register_device(vfd_dec, VFL_TYPE_VIDEO, 0);
>  	if (ret) {
>  		mtk_v4l2_err("Failed to register video device");
> @@ -336,6 +362,12 @@ static int mtk_vcodec_probe(struct platform_device *pdev)
>  	return 0;
>  
>  err_dec_reg:
> +	if (dev->vdec_pdata->uses_stateless_api)
> +		media_device_unregister(&dev->mdev_dec);
> +err_media_reg:
> +	if (dev->vdec_pdata->uses_stateless_api)
> +		v4l2_m2m_unregister_media_controller(dev->m2m_dev_dec);
> +err_reg_cont:
>  	destroy_workqueue(dev->decode_workqueue);
>  err_event_workq:
>  	v4l2_m2m_release(dev->m2m_dev_dec);
> @@ -368,6 +400,13 @@ static int mtk_vcodec_dec_remove(struct platform_device *pdev)
>  
>  	flush_workqueue(dev->decode_workqueue);
>  	destroy_workqueue(dev->decode_workqueue);
> +
> +	if (media_devnode_is_registered(dev->mdev_dec.devnode)) {
> +		media_device_unregister(&dev->mdev_dec);
> +		v4l2_m2m_unregister_media_controller(dev->m2m_dev_dec);
> +		media_device_cleanup(&dev->mdev_dec);
> +	}
> +
>  	if (dev->m2m_dev_dec)
>  		v4l2_m2m_release(dev->m2m_dev_dec);
>  
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> index 78d4a7728ddf..10edd238c939 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> @@ -383,6 +383,7 @@ struct mtk_vcodec_enc_pdata {
>   * struct mtk_vcodec_dev - driver data
>   * @v4l2_dev: V4L2 device to register video devices for.
>   * @vfd_dec: Video device for decoder
> + * @mdev_dec: Media device for decoder
>   * @vfd_enc: Video device for encoder.
>   *
>   * @m2m_dev_dec: m2m device for decoder
> @@ -418,6 +419,7 @@ struct mtk_vcodec_enc_pdata {
>  struct mtk_vcodec_dev {
>  	struct v4l2_device v4l2_dev;
>  	struct video_device *vfd_dec;
> +	struct media_device mdev_dec;
>  	struct video_device *vfd_enc;
>  
>  	struct v4l2_m2m_dev *m2m_dev_dec;
> 


^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v4 00/15] media: mtk-vcodec: support for MT8183 decoder
  2021-04-27 11:15 [PATCH v4 00/15] media: mtk-vcodec: support for MT8183 decoder Alexandre Courbot
                   ` (14 preceding siblings ...)
  2021-04-27 11:15 ` [PATCH v4 15/15] media: mtk-vcodec: venc: make sure buffer exists in list before removing Alexandre Courbot
@ 2021-04-29  7:35 ` Hans Verkuil
  2021-05-13  8:06   ` Alexandre Courbot
  2021-04-29 12:07 ` Dafna Hirschfeld
  16 siblings, 1 reply; 35+ messages in thread
From: Hans Verkuil @ 2021-04-29  7:35 UTC (permalink / raw)
  To: Alexandre Courbot, Tiffany Lin, Andrew-CT Chen, Rob Herring, Yunfei Dong
  Cc: Mauro Carvalho Chehab, linux-media, linux-kernel, linux-mediatek

On 27/04/2021 13:15, Alexandre Courbot wrote:
> This series adds support for the stateless API into mtk-vcodec, by first
> separating the stateful ops into their own source file, and introducing
> a new set of ops suitable for stateless decoding. As such, support for
> stateful decoders should remain completely unaffected.
> 
> This series has been tested with both MT8183 and MT8173. Decoding was
> working for both chips, and in the case of MT8173 no regression has been
> noticed.
> 
> Patches 1-9 add MT8183 support to the decoder using the stateless API.
> MT8183 only support H.264 acceleration.
> 
> Patches 10-15 are follow-ups that further improve compliance for the
> decoder and encoder, by fixing support for commands on both. Patch 11
> also makes sure that supported H.264 profiles are exported on MT8173.

For a v5 I would recommend that - where possible - these 'improve compliance'
patches are moved to the beginning of the series. That way they can be picked
up quickly without having to wait for the whole series to be accepted.

Regards,

	Hans

> 
> Changes since v3:
> * Stop checking that controls are set for every request.
> * Add V4L2_CID_STATELESS_H264_START_CODE control.
> * Stop mapping OUTPUT buffers and getting the NAL type from them, use the
>   nal_ref_idc field instead.
> * Make V4L2_CID_MIN_BUFFERS_FOR_CAPTURE control stateful-only.
> * Set vb2_buffer's field to V4L2_FIELD_NONE in buffer validation hook.
> 
> Changes since v2:
> * Add follow-up patches fixing support for START/STOP commands for the
>   encoder, and stateful decoder.
> 
> Alexandre Courbot (8):
>   media: mtk-vcodec: vdec: handle firmware version field
>   media: mtk-vcodec: support version 2 of decoder firmware ABI
>   media: add Mediatek's MM21 format
>   dt-bindings: media: document mediatek,mt8183-vcodec-dec
>   media: mtk-vcodec: vdec: use helpers in VIDIOC_(TRY_)DECODER_CMD
>   media: mtk-vcodec: vdec: clamp OUTPUT resolution to hardware limits
>   media: mtk-vcodec: make flush buffer reusable by encoder
>   media: mtk-vcodec: venc: support START and STOP commands
> 
> Hirokazu Honda (1):
>   media: mtk-vcodec: vdec: Support H264 profile control
> 
> Hsin-Yi Wang (1):
>   media: mtk-vcodec: venc: make sure buffer exists in list before
>     removing
> 
> Yunfei Dong (5):
>   media: mtk-vcodec: vdec: move stateful ops into their own file
>   media: mtk-vcodec: vdec: support stateless API
>   media: mtk-vcodec: vdec: support stateless H.264 decoding
>   media: mtk-vcodec: vdec: add media device if using stateless api
>   media: mtk-vcodec: enable MT8183 decoder
> 
>  .../bindings/media/mediatek-vcodec.txt        |   1 +
>  .../media/v4l/pixfmt-reserved.rst             |   7 +
>  drivers/media/platform/Kconfig                |   2 +
>  drivers/media/platform/mtk-vcodec/Makefile    |   3 +
>  .../platform/mtk-vcodec/mtk_vcodec_dec.c      | 818 +++---------------
>  .../platform/mtk-vcodec/mtk_vcodec_dec.h      |  28 +-
>  .../platform/mtk-vcodec/mtk_vcodec_dec_drv.c  |  66 +-
>  .../mtk-vcodec/mtk_vcodec_dec_stateful.c      | 667 ++++++++++++++
>  .../mtk-vcodec/mtk_vcodec_dec_stateless.c     | 370 ++++++++
>  .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  58 +-
>  .../platform/mtk-vcodec/mtk_vcodec_enc.c      | 135 ++-
>  .../platform/mtk-vcodec/mtk_vcodec_enc_drv.c  |   4 +
>  .../mtk-vcodec/vdec/vdec_h264_req_if.c        | 780 +++++++++++++++++
>  .../media/platform/mtk-vcodec/vdec_drv_if.c   |   3 +
>  .../media/platform/mtk-vcodec/vdec_drv_if.h   |   1 +
>  .../media/platform/mtk-vcodec/vdec_ipi_msg.h  |  23 +-
>  .../media/platform/mtk-vcodec/vdec_vpu_if.c   |  43 +-
>  .../media/platform/mtk-vcodec/vdec_vpu_if.h   |   5 +
>  drivers/media/v4l2-core/v4l2-ioctl.c          |   1 +
>  include/uapi/linux/videodev2.h                |   1 +
>  20 files changed, 2293 insertions(+), 723 deletions(-)
>  create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateful.c
>  create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c
>  create mode 100644 drivers/media/platform/mtk-vcodec/vdec/vdec_h264_req_if.c
> 
> --
> 2.31.1.498.g6c1eba8ee3d-goog
> 


^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v4 00/15] media: mtk-vcodec: support for MT8183 decoder
  2021-04-27 11:15 [PATCH v4 00/15] media: mtk-vcodec: support for MT8183 decoder Alexandre Courbot
                   ` (15 preceding siblings ...)
  2021-04-29  7:35 ` [PATCH v4 00/15] media: mtk-vcodec: support for MT8183 decoder Hans Verkuil
@ 2021-04-29 12:07 ` Dafna Hirschfeld
  2021-05-13  8:21   ` Alexandre Courbot
  16 siblings, 1 reply; 35+ messages in thread
From: Dafna Hirschfeld @ 2021-04-29 12:07 UTC (permalink / raw)
  To: Alexandre Courbot, Tiffany Lin, Andrew-CT Chen, Rob Herring, Yunfei Dong
  Cc: Mauro Carvalho Chehab, Hans Verkuil, linux-media, linux-kernel,
	linux-mediatek

Hi,

On 27.04.21 13:15, Alexandre Courbot wrote:
> This series adds support for the stateless API into mtk-vcodec, by first
> separating the stateful ops into their own source file, and introducing
> a new set of ops suitable for stateless decoding. As such, support for
> stateful decoders should remain completely unaffected.
> 
> This series has been tested with both MT8183 and MT8173. Decoding was
> working for both chips, and in the case of MT8173 no regression has been
> noticed.

I am trying to test the decoder with this patchset using v4l2-ctl on mt8173.

I am trying to decode an h264 file into V4L2_PIX_FMT_MT21C format.
I am not able to do it. It seems that the driver expects each buffer to start
with a nal starting code, and the v4l2-ctl command just read the files into
buffers without any parsing.

Can you share the command and the files you used for testing?

Thank you,
Dafna

> 
> Patches 1-9 add MT8183 support to the decoder using the stateless API.
> MT8183 only support H.264 acceleration.
> 
> Patches 10-15 are follow-ups that further improve compliance for the
> decoder and encoder, by fixing support for commands on both. Patch 11
> also makes sure that supported H.264 profiles are exported on MT8173.
> 
> Changes since v3:
> * Stop checking that controls are set for every request.
> * Add V4L2_CID_STATELESS_H264_START_CODE control.
> * Stop mapping OUTPUT buffers and getting the NAL type from them, use the
>    nal_ref_idc field instead.
> * Make V4L2_CID_MIN_BUFFERS_FOR_CAPTURE control stateful-only.
> * Set vb2_buffer's field to V4L2_FIELD_NONE in buffer validation hook.
> 
> Changes since v2:
> * Add follow-up patches fixing support for START/STOP commands for the
>    encoder, and stateful decoder.
> 
> Alexandre Courbot (8):
>    media: mtk-vcodec: vdec: handle firmware version field
>    media: mtk-vcodec: support version 2 of decoder firmware ABI
>    media: add Mediatek's MM21 format
>    dt-bindings: media: document mediatek,mt8183-vcodec-dec
>    media: mtk-vcodec: vdec: use helpers in VIDIOC_(TRY_)DECODER_CMD
>    media: mtk-vcodec: vdec: clamp OUTPUT resolution to hardware limits
>    media: mtk-vcodec: make flush buffer reusable by encoder
>    media: mtk-vcodec: venc: support START and STOP commands
> 
> Hirokazu Honda (1):
>    media: mtk-vcodec: vdec: Support H264 profile control
> 
> Hsin-Yi Wang (1):
>    media: mtk-vcodec: venc: make sure buffer exists in list before
>      removing
> 
> Yunfei Dong (5):
>    media: mtk-vcodec: vdec: move stateful ops into their own file
>    media: mtk-vcodec: vdec: support stateless API
>    media: mtk-vcodec: vdec: support stateless H.264 decoding
>    media: mtk-vcodec: vdec: add media device if using stateless api
>    media: mtk-vcodec: enable MT8183 decoder
> 
>   .../bindings/media/mediatek-vcodec.txt        |   1 +
>   .../media/v4l/pixfmt-reserved.rst             |   7 +
>   drivers/media/platform/Kconfig                |   2 +
>   drivers/media/platform/mtk-vcodec/Makefile    |   3 +
>   .../platform/mtk-vcodec/mtk_vcodec_dec.c      | 818 +++---------------
>   .../platform/mtk-vcodec/mtk_vcodec_dec.h      |  28 +-
>   .../platform/mtk-vcodec/mtk_vcodec_dec_drv.c  |  66 +-
>   .../mtk-vcodec/mtk_vcodec_dec_stateful.c      | 667 ++++++++++++++
>   .../mtk-vcodec/mtk_vcodec_dec_stateless.c     | 370 ++++++++
>   .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  58 +-
>   .../platform/mtk-vcodec/mtk_vcodec_enc.c      | 135 ++-
>   .../platform/mtk-vcodec/mtk_vcodec_enc_drv.c  |   4 +
>   .../mtk-vcodec/vdec/vdec_h264_req_if.c        | 780 +++++++++++++++++
>   .../media/platform/mtk-vcodec/vdec_drv_if.c   |   3 +
>   .../media/platform/mtk-vcodec/vdec_drv_if.h   |   1 +
>   .../media/platform/mtk-vcodec/vdec_ipi_msg.h  |  23 +-
>   .../media/platform/mtk-vcodec/vdec_vpu_if.c   |  43 +-
>   .../media/platform/mtk-vcodec/vdec_vpu_if.h   |   5 +
>   drivers/media/v4l2-core/v4l2-ioctl.c          |   1 +
>   include/uapi/linux/videodev2.h                |   1 +
>   20 files changed, 2293 insertions(+), 723 deletions(-)
>   create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateful.c
>   create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c
>   create mode 100644 drivers/media/platform/mtk-vcodec/vdec/vdec_h264_req_if.c
> 
> --
> 2.31.1.498.g6c1eba8ee3d-goog
> 

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v4 05/15] media: mtk-vcodec: vdec: support stateless API
  2021-04-27 11:15 ` [PATCH v4 05/15] media: mtk-vcodec: vdec: support stateless API Alexandre Courbot
  2021-04-29  7:27   ` Hans Verkuil
@ 2021-04-29 12:10   ` Dafna Hirschfeld
  2021-05-13  9:21     ` Alexandre Courbot
  1 sibling, 1 reply; 35+ messages in thread
From: Dafna Hirschfeld @ 2021-04-29 12:10 UTC (permalink / raw)
  To: Alexandre Courbot, Tiffany Lin, Andrew-CT Chen, Rob Herring, Yunfei Dong
  Cc: Mauro Carvalho Chehab, Hans Verkuil, linux-media, linux-kernel,
	linux-mediatek



On 27.04.21 13:15, Alexandre Courbot wrote:
> From: Yunfei Dong <yunfei.dong@mediatek.com>
> 
> Support the stateless codec API that will be used by MT8183.
> 
> Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
> [acourbot: refactor, cleanup and split]
> Co-developed-by: Alexandre Courbot <acourbot@chromium.org>
> Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
> ---
>   drivers/media/platform/mtk-vcodec/Makefile    |   1 +
>   .../platform/mtk-vcodec/mtk_vcodec_dec.c      |  66 +++-
>   .../platform/mtk-vcodec/mtk_vcodec_dec.h      |   9 +-
>   .../mtk-vcodec/mtk_vcodec_dec_stateless.c     | 370 ++++++++++++++++++
>   .../platform/mtk-vcodec/mtk_vcodec_drv.h      |   3 +
>   5 files changed, 446 insertions(+), 3 deletions(-)
>   create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c
> 
> diff --git a/drivers/media/platform/mtk-vcodec/Makefile b/drivers/media/platform/mtk-vcodec/Makefile
> index 9c3cbb5b800e..4ba93d838ab6 100644
> --- a/drivers/media/platform/mtk-vcodec/Makefile
> +++ b/drivers/media/platform/mtk-vcodec/Makefile
> @@ -12,6 +12,7 @@ mtk-vcodec-dec-y := vdec/vdec_h264_if.o \
>   		vdec_vpu_if.o \
>   		mtk_vcodec_dec.o \
>   		mtk_vcodec_dec_stateful.o \
> +		mtk_vcodec_dec_stateless.o \
>   		mtk_vcodec_dec_pm.o \
>   
>   mtk-vcodec-enc-y := venc/venc_vp8_if.o \
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
> index 4ad2662a43b2..01c5333d6cff 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
> @@ -46,6 +46,13 @@ static struct mtk_q_data *mtk_vdec_get_q_data(struct mtk_vcodec_ctx *ctx,
>   static int vidioc_try_decoder_cmd(struct file *file, void *priv,
>   				struct v4l2_decoder_cmd *cmd)
>   {
> +	struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv);
> +
> +	/* Use M2M stateless helper if relevant */
> +	if (ctx->dev->vdec_pdata->uses_stateless_api)
> +		return v4l2_m2m_ioctl_stateless_try_decoder_cmd(file, priv,
> +								cmd);
> +
>   	switch (cmd->cmd) {
>   	case V4L2_DEC_CMD_STOP:
>   	case V4L2_DEC_CMD_START:
> @@ -72,6 +79,10 @@ static int vidioc_decoder_cmd(struct file *file, void *priv,
>   	if (ret)
>   		return ret;
>   
> +	/* Use M2M stateless helper if relevant */
> +	if (ctx->dev->vdec_pdata->uses_stateless_api)
> +		return v4l2_m2m_ioctl_stateless_decoder_cmd(file, priv, cmd);
> +
>   	mtk_v4l2_debug(1, "decoder cmd=%u", cmd->cmd);
>   	dst_vq = v4l2_m2m_get_vq(ctx->m2m_ctx,
>   				V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE);
> @@ -414,7 +425,8 @@ static int vidioc_vdec_s_fmt(struct file *file, void *priv,
>   	 * Setting OUTPUT format after OUTPUT buffers are allocated is invalid
>   	 * if using the stateful API.
>   	 */
> -	if ((f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) &&
> +	if (!dec_pdata->uses_stateless_api &&
> +	    (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) &&
>   	    vb2_is_busy(&ctx->m2m_ctx->out_q_ctx.q)) {
>   		mtk_v4l2_err("out_q_ctx buffers already requested");
>   		ret = -EBUSY;
> @@ -457,6 +469,7 @@ static int vidioc_vdec_s_fmt(struct file *file, void *priv,
>   		ctx->quantization = pix_mp->quantization;
>   		ctx->xfer_func = pix_mp->xfer_func;
>   
> +		ctx->current_codec = fmt->fourcc;
>   		if (ctx->state == MTK_STATE_FREE) {
>   			ret = vdec_if_init(ctx, q_data->fmt->fourcc);
>   			if (ret) {
> @@ -468,6 +481,49 @@ static int vidioc_vdec_s_fmt(struct file *file, void *priv,
>   		}
>   	}
>   
> +	/*
> +	 * If using the stateless API, S_FMT should have the effect of setting
> +	 * the CAPTURE queue resolution no matter which queue it was called on.
> +	 */
> +	if (dec_pdata->uses_stateless_api) {
> +		ctx->picinfo.pic_w = pix_mp->width;
> +		ctx->picinfo.pic_h = pix_mp->height;
> +
> +		ret = vdec_if_get_param(ctx, GET_PARAM_PIC_INFO, &ctx->picinfo);
> +		if (ret) {
> +			mtk_v4l2_err("[%d]Error!! Get GET_PARAM_PICTURE_INFO Fail",
> +				ctx->id);
> +			return -EINVAL;
> +		}
> +
> +		ctx->last_decoded_picinfo = ctx->picinfo;
> +
> +		if (ctx->q_data[MTK_Q_DATA_DST].fmt->num_planes == 1) {
> +			ctx->q_data[MTK_Q_DATA_DST].sizeimage[0] =
> +				ctx->picinfo.fb_sz[0] +
> +				ctx->picinfo.fb_sz[1];
> +			ctx->q_data[MTK_Q_DATA_DST].bytesperline[0] =
> +				ctx->picinfo.buf_w;
> +		} else {
> +			ctx->q_data[MTK_Q_DATA_DST].sizeimage[0] =
> +				ctx->picinfo.fb_sz[0];
> +			ctx->q_data[MTK_Q_DATA_DST].bytesperline[0] =
> +				ctx->picinfo.buf_w;
> +			ctx->q_data[MTK_Q_DATA_DST].sizeimage[1] =
> +				ctx->picinfo.fb_sz[1];
> +			ctx->q_data[MTK_Q_DATA_DST].bytesperline[1] =
> +				ctx->picinfo.buf_w;
> +		}
> +
> +		ctx->q_data[MTK_Q_DATA_DST].coded_width = ctx->picinfo.buf_w;
> +		ctx->q_data[MTK_Q_DATA_DST].coded_height = ctx->picinfo.buf_h;
> +		mtk_v4l2_debug(2, "[%d] vdec_if_init() num_plane = %d wxh=%dx%d pic wxh=%dx%d sz[0]=0x%x sz[1]=0x%x",
> +			ctx->id, pix_mp->num_planes,
> +			ctx->picinfo.buf_w, ctx->picinfo.buf_h,
> +			ctx->picinfo.pic_w, ctx->picinfo.pic_h,
> +			ctx->q_data[MTK_Q_DATA_DST].sizeimage[0],
> +			ctx->q_data[MTK_Q_DATA_DST].sizeimage[1]);
> +	}
>   	return 0;
>   }
>   
> @@ -765,9 +821,15 @@ void vb2ops_vdec_stop_streaming(struct vb2_queue *q)
>   		while ((src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx))) {
>   			struct mtk_video_dec_buf *buf_info = container_of(
>   				 src_buf, struct mtk_video_dec_buf, m2m_buf.vb);
> -			if (!buf_info->lastframe)
> +			if (!buf_info->lastframe) {
> +				struct media_request *req =
> +					src_buf->vb2_buf.req_obj.req;
>   				v4l2_m2m_buf_done(src_buf,
>   						VB2_BUF_STATE_ERROR);
> +				if (req)
> +					v4l2_ctrl_request_complete(req,
> +								&ctx->ctrl_hdl);
> +			}
>   		}
>   		return;
>   	}
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h
> index 6a18cb3bfe07..6b29d7d9ae15 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h
> @@ -45,6 +45,7 @@ struct vdec_fb {
>    * @lastframe:		Intput buffer is last buffer - EOS
>    * @error:		An unrecoverable error occurs on this buffer.
>    * @frame_buffer:	Decode status, and buffer information of Capture buffer
> + * @bs_buffer:	Output buffer info
>    *
>    * Note : These status information help us track and debug buffer state
>    */
> @@ -55,12 +56,18 @@ struct mtk_video_dec_buf {
>   	bool	queued_in_vb2;
>   	bool	queued_in_v4l2;
>   	bool	lastframe;
> +
>   	bool	error;
> -	struct vdec_fb	frame_buffer;
> +
> +	union {
> +		struct vdec_fb	frame_buffer;
> +		struct mtk_vcodec_mem	bs_buffer;
> +	};
>   };
>   
>   extern const struct v4l2_ioctl_ops mtk_vdec_ioctl_ops;
>   extern const struct v4l2_m2m_ops mtk_vdec_m2m_ops;
> +extern const struct media_device_ops mtk_vcodec_media_ops;
>   
>   
>   /*
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c
> new file mode 100644
> index 000000000000..75ddf53e2876
> --- /dev/null
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c

Hi, when compiling with -DDEBUG flag, I got some compilation errors for this file.

Thanks,
Dafna

> @@ -0,0 +1,370 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +#include "media/videobuf2-v4l2.h"
> +#include <media/videobuf2-dma-contig.h>
> +#include <media/v4l2-event.h>
> +#include <media/v4l2-mem2mem.h>
> +#include <linux/module.h>
> +
> +#include "mtk_vcodec_drv.h"
> +#include "mtk_vcodec_dec.h"
> +#include "mtk_vcodec_intr.h"
> +#include "mtk_vcodec_util.h"
> +#include "vdec_drv_if.h"
> +#include "mtk_vcodec_dec_pm.h"
> +
> +/**
> + * struct mtk_stateless_control  - CID control type
> + * @cfg: control configuration
> + * @codec_type: codec type (V4L2 pixel format) for CID control type
> + */
> +struct mtk_stateless_control {
> +	struct v4l2_ctrl_config cfg;
> +	int codec_type;
> +};
> +
> +static const struct mtk_stateless_control mtk_stateless_controls[] = {
> +	{
> +		.cfg = {
> +			.id = V4L2_CID_STATELESS_H264_SPS,
> +		},
> +		.codec_type = V4L2_PIX_FMT_H264_SLICE,
> +	},
> +	{
> +		.cfg = {
> +			.id = V4L2_CID_STATELESS_H264_PPS,
> +		},
> +		.codec_type = V4L2_PIX_FMT_H264_SLICE,
> +	},
> +	{
> +		.cfg = {
> +			.id = V4L2_CID_STATELESS_H264_SCALING_MATRIX,
> +		},
> +		.codec_type = V4L2_PIX_FMT_H264_SLICE,
> +	},
> +	{
> +		.cfg = {
> +			.id = V4L2_CID_STATELESS_H264_DECODE_PARAMS,
> +		},
> +		.codec_type = V4L2_PIX_FMT_H264_SLICE,
> +	},
> +	{
> +		.cfg = {
> +			.id = V4L2_CID_MPEG_VIDEO_H264_PROFILE,
> +			.def = V4L2_MPEG_VIDEO_H264_PROFILE_MAIN,
> +			.max = V4L2_MPEG_VIDEO_H264_PROFILE_HIGH,
> +			.menu_skip_mask =
> +				BIT(V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE) |
> +				BIT(V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED),
> +		},
> +		.codec_type = V4L2_PIX_FMT_H264_SLICE,
> +	},
> +	{
> +		.cfg = {
> +			.id = V4L2_CID_STATELESS_H264_DECODE_MODE,
> +			.min = V4L2_STATELESS_H264_DECODE_MODE_FRAME_BASED,
> +			.def = V4L2_STATELESS_H264_DECODE_MODE_FRAME_BASED,
> +			.max = V4L2_STATELESS_H264_DECODE_MODE_FRAME_BASED,
> +		},
> +		.codec_type = V4L2_PIX_FMT_H264_SLICE,
> +	},
> +	{
> +		.cfg = {
> +			.id = V4L2_CID_STATELESS_H264_START_CODE,
> +			.min = V4L2_STATELESS_H264_START_CODE_ANNEX_B,
> +			.def = V4L2_STATELESS_H264_START_CODE_ANNEX_B,
> +			.max = V4L2_STATELESS_H264_START_CODE_ANNEX_B,
> +		},
> +		.codec_type = V4L2_PIX_FMT_H264_SLICE,
> +	}
> +};
> +#define NUM_CTRLS ARRAY_SIZE(mtk_stateless_controls)
> +
> +static const struct mtk_video_fmt mtk_video_formats[] = {
> +	{
> +		.fourcc = V4L2_PIX_FMT_H264_SLICE,
> +		.type = MTK_FMT_DEC,
> +		.num_planes = 1,
> +	},
> +	{
> +		.fourcc = V4L2_PIX_FMT_MM21,
> +		.type = MTK_FMT_FRAME,
> +		.num_planes = 2,
> +	},
> +};
> +#define NUM_FORMATS ARRAY_SIZE(mtk_video_formats)
> +#define DEFAULT_OUT_FMT_IDX    0
> +#define DEFAULT_CAP_FMT_IDX    1
> +
> +static const struct mtk_codec_framesizes mtk_vdec_framesizes[] = {
> +	{
> +		.fourcc	= V4L2_PIX_FMT_H264_SLICE,
> +		.stepwise = {  MTK_VDEC_MIN_W, MTK_VDEC_MAX_W, 16,
> +				MTK_VDEC_MIN_H, MTK_VDEC_MAX_H, 16 },
> +	},
> +};
> +
> +#define NUM_SUPPORTED_FRAMESIZE ARRAY_SIZE(mtk_vdec_framesizes)
> +
> +static void mtk_vdec_stateless_set_dst_payload(struct mtk_vcodec_ctx *ctx,
> +					       struct vdec_fb *fb)
> +{
> +	struct mtk_video_dec_buf *vdec_frame_buf =
> +		container_of(fb, struct mtk_video_dec_buf, frame_buffer);
> +	struct vb2_v4l2_buffer *vb = &vdec_frame_buf->m2m_buf.vb;
> +	unsigned int cap_y_size = ctx->q_data[MTK_Q_DATA_DST].sizeimage[0];
> +
> +	vb2_set_plane_payload(&vb->vb2_buf, 0, cap_y_size);
> +	if (ctx->q_data[MTK_Q_DATA_DST].fmt->num_planes == 2) {
> +		unsigned int cap_c_size =
> +			ctx->q_data[MTK_Q_DATA_DST].sizeimage[1];
> +
> +		vb2_set_plane_payload(&vb->vb2_buf, 1, cap_c_size);
> +	}
> +}
> +
> +static struct vdec_fb *vdec_get_cap_buffer(struct mtk_vcodec_ctx *ctx,
> +					   struct vb2_v4l2_buffer *vb2_v4l2)
> +{
> +	struct mtk_video_dec_buf *framebuf =
> +		container_of(vb2_v4l2, struct mtk_video_dec_buf, m2m_buf.vb);
> +	struct vdec_fb *pfb = &framebuf->frame_buffer;
> +	struct vb2_buffer *dst_buf = &vb2_v4l2->vb2_buf;
> +
> +	pfb = &framebuf->frame_buffer;
> +	pfb->base_y.va = NULL;
> +	pfb->base_y.dma_addr = vb2_dma_contig_plane_dma_addr(dst_buf, 0);
> +	pfb->base_y.size = ctx->q_data[MTK_Q_DATA_DST].sizeimage[0];
> +
> +	if (ctx->q_data[MTK_Q_DATA_DST].fmt->num_planes == 2) {
> +		pfb->base_c.va = NULL;
> +		pfb->base_c.dma_addr =
> +			vb2_dma_contig_plane_dma_addr(dst_buf, 1);
> +		pfb->base_c.size = ctx->q_data[MTK_Q_DATA_DST].sizeimage[1];
> +	}
> +	mtk_v4l2_debug(1,
> +		"id=%d Framebuf  pfb=%p VA=%p Y_DMA=%pad C_DMA=%pad Size=%zx frame_count = %d",
> +		dst_buf->index, pfb,
> +		pfb->base_y.va, &pfb->base_y.dma_addr,
> +		&pfb->base_c.dma_addr, pfb->base_y.size,
> +		ctx->decoded_frame_cnt);
> +
> +	return pfb;
> +}
> +
> +static void vb2ops_vdec_buf_request_complete(struct vb2_buffer *vb)
> +{
> +	struct mtk_vcodec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
> +
> +	v4l2_ctrl_request_complete(vb->req_obj.req, &ctx->ctrl_hdl);
> +}
> +
> +static int fops_media_request_validate(struct media_request *mreq)
> +{
> +	const unsigned int buffer_cnt = vb2_request_buffer_cnt(mreq);
> +
> +	switch (buffer_cnt) {
> +	case 1:
> +		/* We expect exactly one buffer with the request */
> +		break;
> +	case 0:
> +		mtk_v4l2_err("No buffer provided with the request");
> +		return -ENOENT;
> +	default:
> +		mtk_v4l2_err("Too many buffers (%d) provided with the request",
> +			     buffer_cnt);
> +		return -EINVAL;
> +	}
> +
> +	return vb2_request_validate(mreq);
> +}
> +
> +static void mtk_vdec_worker(struct work_struct *work)
> +{
> +	struct mtk_vcodec_ctx *ctx =
> +		container_of(work, struct mtk_vcodec_ctx, decode_work);
> +	struct mtk_vcodec_dev *dev = ctx->dev;
> +	struct vb2_v4l2_buffer *vb2_v4l2_src, *vb2_v4l2_dst;
> +	struct vb2_buffer *vb2_src;
> +	struct mtk_vcodec_mem *bs_src;
> +	struct mtk_video_dec_buf *dec_buf_src;
> +	struct media_request *src_buf_req;
> +	struct vdec_fb *dst_buf;
> +	bool res_chg = false;
> +	int ret;
> +
> +	vb2_v4l2_src = v4l2_m2m_next_src_buf(ctx->m2m_ctx);
> +	if (vb2_v4l2_src == NULL) {
> +		v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx);
> +		mtk_v4l2_debug(1, "[%d] no available source buffer", ctx->id);
> +		return;
> +	}
> +
> +	vb2_v4l2_dst = v4l2_m2m_next_dst_buf(ctx->m2m_ctx);
> +	if (vb2_v4l2_dst == NULL) {
> +		v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx);
> +		mtk_v4l2_debug(1, "[%d] no available destination buffer", ctx->id);
> +		return;
> +	}
> +
> +	vb2_src = &vb2_v4l2_src->vb2_buf;
> +	dec_buf_src = container_of(vb2_v4l2_src, struct mtk_video_dec_buf,
> +				   m2m_buf.vb);
> +	bs_src = &dec_buf_src->bs_buffer;
> +
> +	mtk_v4l2_debug(3, "[%d] (%d) id=%d, vb=%p buf_info = %p",
> +			ctx->id, src_buf->vb2_queue->type,
> +			src_buf->index, src_buf, src_buf_info);
> +
> +	bs_src->va = NULL;
> +	bs_src->dma_addr = vb2_dma_contig_plane_dma_addr(vb2_src, 0);
> +	bs_src->size = (size_t)vb2_src->planes[0].bytesused;
> +
> +	mtk_v4l2_debug(3, "[%d] Bitstream VA=%p DMA=%pad Size=%zx vb=%p",
> +			ctx->id, buf->va, &buf->dma_addr, buf->size, src_buf);
> +	/* Apply request controls. */
> +	src_buf_req = vb2_src->req_obj.req;
> +	if (src_buf_req)
> +		v4l2_ctrl_request_setup(src_buf_req, &ctx->ctrl_hdl);
> +	else
> +		mtk_v4l2_err("vb2 buffer media request is NULL");
> +
> +	dst_buf = vdec_get_cap_buffer(ctx, vb2_v4l2_dst);
> +	v4l2_m2m_buf_copy_metadata(vb2_v4l2_src, vb2_v4l2_dst, true);
> +	ret = vdec_if_decode(ctx, bs_src, dst_buf, &res_chg);
> +	if (ret) {
> +		mtk_v4l2_err(
> +			" <===[%d], src_buf[%d] sz=0x%zx pts=%llu vdec_if_decode() ret=%d res_chg=%d===>",
> +			ctx->id, vb2_src->index, bs_src->size,
> +			vb2_src->timestamp, ret, res_chg);
> +		if (ret == -EIO) {
> +			mutex_lock(&ctx->lock);
> +			dec_buf_src->error = true;
> +			mutex_unlock(&ctx->lock);
> +		}
> +	}
> +
> +	mtk_vdec_stateless_set_dst_payload(ctx, dst_buf);
> +
> +	v4l2_m2m_buf_done_and_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx,
> +		ret ? VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
> +
> +	v4l2_ctrl_request_complete(src_buf_req, &ctx->ctrl_hdl);
> +}
> +
> +static void vb2ops_vdec_stateless_buf_queue(struct vb2_buffer *vb)
> +{
> +	struct mtk_vcodec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
> +	struct vb2_v4l2_buffer *vb2_v4l2 = to_vb2_v4l2_buffer(vb);
> +
> +	mtk_v4l2_debug(3, "[%d] (%d) id=%d, vb=%p",
> +			ctx->id, vb->vb2_queue->type,
> +			vb->index, vb);
> +
> +	mutex_lock(&ctx->lock);
> +	v4l2_m2m_buf_queue(ctx->m2m_ctx, vb2_v4l2);
> +	mutex_unlock(&ctx->lock);
> +	if (vb->vb2_queue->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
> +		return;
> +
> +	mtk_v4l2_debug(3, "(%d) id=%d, bs=%p",
> +		vb->vb2_queue->type, vb->index, src_buf);
> +
> +	/* If an OUTPUT buffer, we may need to update the state */
> +	if (ctx->state == MTK_STATE_INIT) {
> +		ctx->state = MTK_STATE_HEADER;
> +		mtk_v4l2_debug(1, "Init driver from init to header.");
> +	} else {
> +		mtk_v4l2_debug(3, "[%d] already init driver %d",
> +				ctx->id, ctx->state);
> +	}
> +}
> +
> +static int mtk_vdec_flush_decoder(struct mtk_vcodec_ctx *ctx)
> +{
> +	bool res_chg;
> +
> +	return vdec_if_decode(ctx, NULL, NULL, &res_chg);
> +}
> +
> +static int mtk_vcodec_dec_ctrls_setup(struct mtk_vcodec_ctx *ctx)
> +{
> +	unsigned int i;
> +
> +	v4l2_ctrl_handler_init(&ctx->ctrl_hdl, NUM_CTRLS);
> +	if (ctx->ctrl_hdl.error) {
> +		mtk_v4l2_err("v4l2_ctrl_handler_init failed\n");
> +		return ctx->ctrl_hdl.error;
> +	}
> +
> +	for (i = 0; i < NUM_CTRLS; i++) {
> +		struct v4l2_ctrl_config cfg = mtk_stateless_controls[i].cfg;
> +
> +		v4l2_ctrl_new_custom(&ctx->ctrl_hdl, &cfg, NULL);
> +		if (ctx->ctrl_hdl.error) {
> +			mtk_v4l2_err("Adding control %d failed %d",
> +					i, ctx->ctrl_hdl.error);
> +			return ctx->ctrl_hdl.error;
> +		}
> +	}
> +
> +	v4l2_ctrl_handler_setup(&ctx->ctrl_hdl);
> +
> +	return 0;
> +}
> +
> +const struct media_device_ops mtk_vcodec_media_ops = {
> +	.req_validate	= fops_media_request_validate,
> +	.req_queue	= v4l2_m2m_request_queue,
> +};
> +
> +static void mtk_init_vdec_params(struct mtk_vcodec_ctx *ctx)
> +{
> +	struct vb2_queue *src_vq;
> +
> +	src_vq = v4l2_m2m_get_vq(ctx->m2m_ctx,
> +				 V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE);
> +
> +	/* Support request api for output plane */
> +	src_vq->supports_requests = true;
> +	src_vq->requires_requests = true;
> +}
> +
> +static int vb2ops_vdec_out_buf_validate(struct vb2_buffer *vb)
> +{
> +	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> +
> +	vbuf->field = V4L2_FIELD_NONE;
> +	return 0;
> +}
> +
> +static struct vb2_ops mtk_vdec_request_vb2_ops = {
> +	.queue_setup	= vb2ops_vdec_queue_setup,
> +	.buf_prepare	= vb2ops_vdec_buf_prepare,
> +	.wait_prepare	= vb2_ops_wait_prepare,
> +	.wait_finish	= vb2_ops_wait_finish,
> +	.start_streaming	= vb2ops_vdec_start_streaming,
> +
> +	.buf_queue	= vb2ops_vdec_stateless_buf_queue,
> +	.buf_out_validate = vb2ops_vdec_out_buf_validate,
> +	.buf_init	= vb2ops_vdec_buf_init,
> +	.buf_finish	= vb2ops_vdec_buf_finish,
> +	.stop_streaming	= vb2ops_vdec_stop_streaming,
> +	.buf_request_complete = vb2ops_vdec_buf_request_complete,
> +};
> +
> +const struct mtk_vcodec_dec_pdata mtk_vdec_8183_pdata = {
> +	.chip = MTK_MT8183,
> +	.init_vdec_params = mtk_init_vdec_params,
> +	.ctrls_setup = mtk_vcodec_dec_ctrls_setup,
> +	.vdec_vb2_ops = &mtk_vdec_request_vb2_ops,
> +	.vdec_formats = mtk_video_formats,
> +	.num_formats = NUM_FORMATS,
> +	.default_out_fmt = &mtk_video_formats[DEFAULT_OUT_FMT_IDX],
> +	.default_cap_fmt = &mtk_video_formats[DEFAULT_CAP_FMT_IDX],
> +	.vdec_framesizes = mtk_vdec_framesizes,
> +	.num_framesizes = NUM_SUPPORTED_FRAMESIZE,
> +	.uses_stateless_api = true,
> +	.worker = mtk_vdec_worker,
> +	.flush_decoder = mtk_vdec_flush_decoder,
> +};
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> index e5b8309785e1..78d4a7728ddf 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> @@ -250,6 +250,7 @@ struct vdec_pic_info {
>    * @encode_work: worker for the encoding
>    * @last_decoded_picinfo: pic information get from latest decode
>    * @empty_flush_buf: a fake size-0 capture buffer that indicates flush
> + * @current_codec: current set input codec, in V4L2 pixel format
>    *
>    * @colorspace: enum v4l2_colorspace; supplemental to pixelformat
>    * @ycbcr_enc: enum v4l2_ycbcr_encoding, Y'CbCr encoding
> @@ -289,6 +290,8 @@ struct mtk_vcodec_ctx {
>   	struct vdec_pic_info last_decoded_picinfo;
>   	struct mtk_video_dec_buf *empty_flush_buf;
>   
> +	u32 current_codec;
> +
>   	enum v4l2_colorspace colorspace;
>   	enum v4l2_ycbcr_encoding ycbcr_enc;
>   	enum v4l2_quantization quantization;
> 

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v4 08/15] dt-bindings: media: document mediatek,mt8183-vcodec-dec
  2021-04-27 11:15 ` [PATCH v4 08/15] dt-bindings: media: document mediatek,mt8183-vcodec-dec Alexandre Courbot
@ 2021-05-04 12:55   ` Alexandre Courbot
  2021-05-04 14:48     ` Rob Herring
  0 siblings, 1 reply; 35+ messages in thread
From: Alexandre Courbot @ 2021-05-04 12:55 UTC (permalink / raw)
  To: Rob Herring, Hans Verkuil
  Cc: Mauro Carvalho Chehab, Yunfei Dong, Andrew-CT Chen, Tiffany Lin,
	Linux Media Mailing List, LKML,
	moderated list:ARM/Mediatek SoC support

Hi Rob,

On Tue, Apr 27, 2021 at 8:16 PM Alexandre Courbot <acourbot@chromium.org> wrote:
>
> MT8183's decoder is instantiated similarly to MT8173's.

Gentle ping on this, could we get your Acked-by for this minor change?

Thanks,
Alex.

>
> Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
> ---
>  Documentation/devicetree/bindings/media/mediatek-vcodec.txt | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
> index 06db6837cefd..a2a2a9e2ade3 100644
> --- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
> +++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
> @@ -9,6 +9,7 @@ Required properties:
>    "mediatek,mt8173-vcodec-enc" for mt8173 avc encoder.
>    "mediatek,mt8183-vcodec-enc" for MT8183 encoder.
>    "mediatek,mt8173-vcodec-dec" for MT8173 decoder.
> +  "mediatek,mt8183-vcodec-dec" for MT8183 decoder.
>  - reg : Physical base address of the video codec registers and length of
>    memory mapped region.
>  - interrupts : interrupt number to the cpu.
> --
> 2.31.1.498.g6c1eba8ee3d-goog
>

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v4 08/15] dt-bindings: media: document mediatek,mt8183-vcodec-dec
  2021-05-04 12:55   ` Alexandre Courbot
@ 2021-05-04 14:48     ` Rob Herring
  0 siblings, 0 replies; 35+ messages in thread
From: Rob Herring @ 2021-05-04 14:48 UTC (permalink / raw)
  To: Alexandre Courbot
  Cc: Hans Verkuil, Mauro Carvalho Chehab, Yunfei Dong, Andrew-CT Chen,
	Tiffany Lin, Linux Media Mailing List, LKML,
	moderated list:ARM/Mediatek SoC support

On Tue, May 4, 2021 at 7:56 AM Alexandre Courbot <acourbot@chromium.org> wrote:
>
> Hi Rob,
>
> On Tue, Apr 27, 2021 at 8:16 PM Alexandre Courbot <acourbot@chromium.org> wrote:
> >
> > MT8183's decoder is instantiated similarly to MT8173's.
>
> Gentle ping on this, could we get your Acked-by for this minor change?

First, please don't ping for replies during the merge window. Second,
if you want to be sure of getting a response, you have to CC the DT
list and then you can check PW and see where you are in my queue[1].
Third, my ack really isn't needed on a simple compatible string
addition.

In any case,

Acked-by: Rob Herring <robh@kernel.org>

Rob

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v4 07/15] media: mtk-vcodec: vdec: add media device if using stateless api
  2021-04-29  7:28   ` Hans Verkuil
@ 2021-05-13  8:05     ` Alexandre Courbot
  2021-05-13 15:07       ` Nicolas Dufresne
  0 siblings, 1 reply; 35+ messages in thread
From: Alexandre Courbot @ 2021-05-13  8:05 UTC (permalink / raw)
  To: Hans Verkuil
  Cc: Tiffany Lin, Andrew-CT Chen, Rob Herring, Yunfei Dong,
	Mauro Carvalho Chehab, Linux Media Mailing List, LKML,
	moderated list:ARM/Mediatek SoC support

Hi Hans, thanks for the review!

On Thu, Apr 29, 2021 at 4:28 PM Hans Verkuil <hverkuil-cisco@xs4all.nl> wrote:
>
> On 27/04/2021 13:15, Alexandre Courbot wrote:
> > From: Yunfei Dong <yunfei.dong@mediatek.com>
> >
> > The stateless API requires a media device for issuing requests. Add one
> > if we are being instantiated as a stateless decoder.
>
> Why for the stateless decoder only? Why not create one for all?
>
> It's not a blocker, but I would recommend looking at this.

Would there be any use in creating a media device for a stateful
decoder that does not need to use requests?

Cheers,
Alex.

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v4 00/15] media: mtk-vcodec: support for MT8183 decoder
  2021-04-29  7:35 ` [PATCH v4 00/15] media: mtk-vcodec: support for MT8183 decoder Hans Verkuil
@ 2021-05-13  8:06   ` Alexandre Courbot
  0 siblings, 0 replies; 35+ messages in thread
From: Alexandre Courbot @ 2021-05-13  8:06 UTC (permalink / raw)
  To: Hans Verkuil
  Cc: Tiffany Lin, Andrew-CT Chen, Rob Herring, Yunfei Dong,
	Mauro Carvalho Chehab, Linux Media Mailing List, LKML,
	moderated list:ARM/Mediatek SoC support

On Thu, Apr 29, 2021 at 4:35 PM Hans Verkuil <hverkuil-cisco@xs4all.nl> wrote:
>
> On 27/04/2021 13:15, Alexandre Courbot wrote:
> > This series adds support for the stateless API into mtk-vcodec, by first
> > separating the stateful ops into their own source file, and introducing
> > a new set of ops suitable for stateless decoding. As such, support for
> > stateful decoders should remain completely unaffected.
> >
> > This series has been tested with both MT8183 and MT8173. Decoding was
> > working for both chips, and in the case of MT8173 no regression has been
> > noticed.
> >
> > Patches 1-9 add MT8183 support to the decoder using the stateless API.
> > MT8183 only support H.264 acceleration.
> >
> > Patches 10-15 are follow-ups that further improve compliance for the
> > decoder and encoder, by fixing support for commands on both. Patch 11
> > also makes sure that supported H.264 profiles are exported on MT8173.
>
> For a v5 I would recommend that - where possible - these 'improve compliance'
> patches are moved to the beginning of the series. That way they can be picked
> up quickly without having to wait for the whole series to be accepted.

Makes sense, the current order reflects the chronology these patches
have been written, but I agree that improving compliance should be
merged first. Let me try to reorder things a bit.

Cheers,
Alex.

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v4 00/15] media: mtk-vcodec: support for MT8183 decoder
  2021-04-29 12:07 ` Dafna Hirschfeld
@ 2021-05-13  8:21   ` Alexandre Courbot
  2021-07-19 11:43     ` Dafna Hirschfeld
  0 siblings, 1 reply; 35+ messages in thread
From: Alexandre Courbot @ 2021-05-13  8:21 UTC (permalink / raw)
  To: Dafna Hirschfeld
  Cc: Tiffany Lin, Andrew-CT Chen, Rob Herring, Yunfei Dong,
	Mauro Carvalho Chehab, Hans Verkuil, Linux Media Mailing List,
	LKML, moderated list:ARM/Mediatek SoC support

Hi Dafna,

On Thu, Apr 29, 2021 at 9:07 PM Dafna Hirschfeld
<dafna.hirschfeld@collabora.com> wrote:
>
> Hi,
>
> On 27.04.21 13:15, Alexandre Courbot wrote:
> > This series adds support for the stateless API into mtk-vcodec, by first
> > separating the stateful ops into their own source file, and introducing
> > a new set of ops suitable for stateless decoding. As such, support for
> > stateful decoders should remain completely unaffected.
> >
> > This series has been tested with both MT8183 and MT8173. Decoding was
> > working for both chips, and in the case of MT8173 no regression has been
> > noticed.
>
> I am trying to test the decoder with this patchset using v4l2-ctl on mt8173.
>
> I am trying to decode an h264 file into V4L2_PIX_FMT_MT21C format.
> I am not able to do it. It seems that the driver expects each buffer to start
> with a nal starting code, and the v4l2-ctl command just read the files into
> buffers without any parsing.
>
> Can you share the command and the files you used for testing?

I have been using the Chromium test suite (aka
video_decode_accelerator_tests). I had doubts after reading your email
but I tested the series again using this tool and confirmed it was
working.

Unfortunately this test is not easy to build, but maybe if you have a
Chromium environment ready you can run it. mtk-vcodec does expect the
input buffers to be split by NAL units (as per the spec [1] IIUC), so
that would explain why v4l2-ctl failed (I assume that it also fails
without this series?).

Maybe ffmpeg can also be used to exercice this driver with properly
split NAL units, but I am not familiar with its use with V4L2. I'm
also not sure it would be happy about the MT21C format that the driver
outputs, or that it could pick the MDP to convert it to something
readable...

Cheers,
Alex.

[1] https://www.kernel.org/doc/html/latest/userspace-api/media/v4l/pixfmt-compressed.html#compressed-formats

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v4 05/15] media: mtk-vcodec: vdec: support stateless API
  2021-04-29  7:27   ` Hans Verkuil
@ 2021-05-13  9:20     ` Alexandre Courbot
  0 siblings, 0 replies; 35+ messages in thread
From: Alexandre Courbot @ 2021-05-13  9:20 UTC (permalink / raw)
  To: Hans Verkuil
  Cc: Tiffany Lin, Andrew-CT Chen, Rob Herring, Yunfei Dong,
	Mauro Carvalho Chehab, Linux Media Mailing List, LKML,
	moderated list:ARM/Mediatek SoC support

Hi Hans,

On Thu, Apr 29, 2021 at 4:27 PM Hans Verkuil <hverkuil-cisco@xs4all.nl> wrote:
>
> On 27/04/2021 13:15, Alexandre Courbot wrote:
> > From: Yunfei Dong <yunfei.dong@mediatek.com>
> >
> > Support the stateless codec API that will be used by MT8183.
> >
> > Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
> > [acourbot: refactor, cleanup and split]
> > Co-developed-by: Alexandre Courbot <acourbot@chromium.org>
> > Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
> > ---
> >  drivers/media/platform/mtk-vcodec/Makefile    |   1 +
> >  .../platform/mtk-vcodec/mtk_vcodec_dec.c      |  66 +++-
> >  .../platform/mtk-vcodec/mtk_vcodec_dec.h      |   9 +-
> >  .../mtk-vcodec/mtk_vcodec_dec_stateless.c     | 370 ++++++++++++++++++
> >  .../platform/mtk-vcodec/mtk_vcodec_drv.h      |   3 +
> >  5 files changed, 446 insertions(+), 3 deletions(-)
> >  create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c
> >
> > diff --git a/drivers/media/platform/mtk-vcodec/Makefile b/drivers/media/platform/mtk-vcodec/Makefile
> > index 9c3cbb5b800e..4ba93d838ab6 100644
> > --- a/drivers/media/platform/mtk-vcodec/Makefile
> > +++ b/drivers/media/platform/mtk-vcodec/Makefile
> > @@ -12,6 +12,7 @@ mtk-vcodec-dec-y := vdec/vdec_h264_if.o \
> >               vdec_vpu_if.o \
> >               mtk_vcodec_dec.o \
> >               mtk_vcodec_dec_stateful.o \
> > +             mtk_vcodec_dec_stateless.o \
> >               mtk_vcodec_dec_pm.o \
> >
> >  mtk-vcodec-enc-y := venc/venc_vp8_if.o \
> > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
> > index 4ad2662a43b2..01c5333d6cff 100644
> > --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
> > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
> > @@ -46,6 +46,13 @@ static struct mtk_q_data *mtk_vdec_get_q_data(struct mtk_vcodec_ctx *ctx,
> >  static int vidioc_try_decoder_cmd(struct file *file, void *priv,
> >                               struct v4l2_decoder_cmd *cmd)
> >  {
> > +     struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv);
> > +
> > +     /* Use M2M stateless helper if relevant */
> > +     if (ctx->dev->vdec_pdata->uses_stateless_api)
> > +             return v4l2_m2m_ioctl_stateless_try_decoder_cmd(file, priv,
> > +                                                             cmd);
> > +
> >       switch (cmd->cmd) {
> >       case V4L2_DEC_CMD_STOP:
> >       case V4L2_DEC_CMD_START:
> > @@ -72,6 +79,10 @@ static int vidioc_decoder_cmd(struct file *file, void *priv,
> >       if (ret)
> >               return ret;
> >
> > +     /* Use M2M stateless helper if relevant */
> > +     if (ctx->dev->vdec_pdata->uses_stateless_api)
> > +             return v4l2_m2m_ioctl_stateless_decoder_cmd(file, priv, cmd);
> > +
> >       mtk_v4l2_debug(1, "decoder cmd=%u", cmd->cmd);
> >       dst_vq = v4l2_m2m_get_vq(ctx->m2m_ctx,
> >                               V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE);
> > @@ -414,7 +425,8 @@ static int vidioc_vdec_s_fmt(struct file *file, void *priv,
> >        * Setting OUTPUT format after OUTPUT buffers are allocated is invalid
> >        * if using the stateful API.
> >        */
> > -     if ((f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) &&
> > +     if (!dec_pdata->uses_stateless_api &&
> > +         (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) &&
> >           vb2_is_busy(&ctx->m2m_ctx->out_q_ctx.q)) {
> >               mtk_v4l2_err("out_q_ctx buffers already requested");
> >               ret = -EBUSY;
> > @@ -457,6 +469,7 @@ static int vidioc_vdec_s_fmt(struct file *file, void *priv,
> >               ctx->quantization = pix_mp->quantization;
> >               ctx->xfer_func = pix_mp->xfer_func;
> >
> > +             ctx->current_codec = fmt->fourcc;
> >               if (ctx->state == MTK_STATE_FREE) {
> >                       ret = vdec_if_init(ctx, q_data->fmt->fourcc);
> >                       if (ret) {
> > @@ -468,6 +481,49 @@ static int vidioc_vdec_s_fmt(struct file *file, void *priv,
> >               }
> >       }
> >
> > +     /*
> > +      * If using the stateless API, S_FMT should have the effect of setting
> > +      * the CAPTURE queue resolution no matter which queue it was called on.
> > +      */
> > +     if (dec_pdata->uses_stateless_api) {
> > +             ctx->picinfo.pic_w = pix_mp->width;
> > +             ctx->picinfo.pic_h = pix_mp->height;
> > +
> > +             ret = vdec_if_get_param(ctx, GET_PARAM_PIC_INFO, &ctx->picinfo);
> > +             if (ret) {
> > +                     mtk_v4l2_err("[%d]Error!! Get GET_PARAM_PICTURE_INFO Fail",
> > +                             ctx->id);
> > +                     return -EINVAL;
> > +             }
> > +
> > +             ctx->last_decoded_picinfo = ctx->picinfo;
> > +
> > +             if (ctx->q_data[MTK_Q_DATA_DST].fmt->num_planes == 1) {
> > +                     ctx->q_data[MTK_Q_DATA_DST].sizeimage[0] =
> > +                             ctx->picinfo.fb_sz[0] +
> > +                             ctx->picinfo.fb_sz[1];
> > +                     ctx->q_data[MTK_Q_DATA_DST].bytesperline[0] =
> > +                             ctx->picinfo.buf_w;
> > +             } else {
> > +                     ctx->q_data[MTK_Q_DATA_DST].sizeimage[0] =
> > +                             ctx->picinfo.fb_sz[0];
> > +                     ctx->q_data[MTK_Q_DATA_DST].bytesperline[0] =
> > +                             ctx->picinfo.buf_w;
> > +                     ctx->q_data[MTK_Q_DATA_DST].sizeimage[1] =
> > +                             ctx->picinfo.fb_sz[1];
> > +                     ctx->q_data[MTK_Q_DATA_DST].bytesperline[1] =
> > +                             ctx->picinfo.buf_w;
> > +             }
> > +
> > +             ctx->q_data[MTK_Q_DATA_DST].coded_width = ctx->picinfo.buf_w;
> > +             ctx->q_data[MTK_Q_DATA_DST].coded_height = ctx->picinfo.buf_h;
> > +             mtk_v4l2_debug(2, "[%d] vdec_if_init() num_plane = %d wxh=%dx%d pic wxh=%dx%d sz[0]=0x%x sz[1]=0x%x",
> > +                     ctx->id, pix_mp->num_planes,
> > +                     ctx->picinfo.buf_w, ctx->picinfo.buf_h,
> > +                     ctx->picinfo.pic_w, ctx->picinfo.pic_h,
> > +                     ctx->q_data[MTK_Q_DATA_DST].sizeimage[0],
> > +                     ctx->q_data[MTK_Q_DATA_DST].sizeimage[1]);
> > +     }
> >       return 0;
> >  }
> >
> > @@ -765,9 +821,15 @@ void vb2ops_vdec_stop_streaming(struct vb2_queue *q)
> >               while ((src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx))) {
> >                       struct mtk_video_dec_buf *buf_info = container_of(
> >                                src_buf, struct mtk_video_dec_buf, m2m_buf.vb);
> > -                     if (!buf_info->lastframe)
> > +                     if (!buf_info->lastframe) {
> > +                             struct media_request *req =
> > +                                     src_buf->vb2_buf.req_obj.req;
> >                               v4l2_m2m_buf_done(src_buf,
> >                                               VB2_BUF_STATE_ERROR);
> > +                             if (req)
> > +                                     v4l2_ctrl_request_complete(req,
> > +                                                             &ctx->ctrl_hdl);
> > +                     }
> >               }
> >               return;
> >       }
> > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h
> > index 6a18cb3bfe07..6b29d7d9ae15 100644
> > --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h
> > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h
> > @@ -45,6 +45,7 @@ struct vdec_fb {
> >   * @lastframe:               Intput buffer is last buffer - EOS
> >   * @error:           An unrecoverable error occurs on this buffer.
> >   * @frame_buffer:    Decode status, and buffer information of Capture buffer
> > + * @bs_buffer:       Output buffer info
> >   *
> >   * Note : These status information help us track and debug buffer state
> >   */
> > @@ -55,12 +56,18 @@ struct mtk_video_dec_buf {
> >       bool    queued_in_vb2;
> >       bool    queued_in_v4l2;
> >       bool    lastframe;
> > +
> >       bool    error;
> > -     struct vdec_fb  frame_buffer;
> > +
> > +     union {
> > +             struct vdec_fb  frame_buffer;
> > +             struct mtk_vcodec_mem   bs_buffer;
> > +     };
> >  };
> >
> >  extern const struct v4l2_ioctl_ops mtk_vdec_ioctl_ops;
> >  extern const struct v4l2_m2m_ops mtk_vdec_m2m_ops;
> > +extern const struct media_device_ops mtk_vcodec_media_ops;
> >
> >
> >  /*
> > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c
> > new file mode 100644
> > index 000000000000..75ddf53e2876
> > --- /dev/null
> > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c
> > @@ -0,0 +1,370 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +
> > +#include "media/videobuf2-v4l2.h"
> > +#include <media/videobuf2-dma-contig.h>
> > +#include <media/v4l2-event.h>
> > +#include <media/v4l2-mem2mem.h>
> > +#include <linux/module.h>
> > +
> > +#include "mtk_vcodec_drv.h"
> > +#include "mtk_vcodec_dec.h"
> > +#include "mtk_vcodec_intr.h"
> > +#include "mtk_vcodec_util.h"
> > +#include "vdec_drv_if.h"
> > +#include "mtk_vcodec_dec_pm.h"
> > +
> > +/**
> > + * struct mtk_stateless_control  - CID control type
> > + * @cfg: control configuration
> > + * @codec_type: codec type (V4L2 pixel format) for CID control type
> > + */
> > +struct mtk_stateless_control {
> > +     struct v4l2_ctrl_config cfg;
> > +     int codec_type;
> > +};
> > +
> > +static const struct mtk_stateless_control mtk_stateless_controls[] = {
> > +     {
> > +             .cfg = {
> > +                     .id = V4L2_CID_STATELESS_H264_SPS,
> > +             },
> > +             .codec_type = V4L2_PIX_FMT_H264_SLICE,
> > +     },
> > +     {
> > +             .cfg = {
> > +                     .id = V4L2_CID_STATELESS_H264_PPS,
> > +             },
> > +             .codec_type = V4L2_PIX_FMT_H264_SLICE,
> > +     },
> > +     {
> > +             .cfg = {
> > +                     .id = V4L2_CID_STATELESS_H264_SCALING_MATRIX,
> > +             },
> > +             .codec_type = V4L2_PIX_FMT_H264_SLICE,
> > +     },
> > +     {
> > +             .cfg = {
> > +                     .id = V4L2_CID_STATELESS_H264_DECODE_PARAMS,
> > +             },
> > +             .codec_type = V4L2_PIX_FMT_H264_SLICE,
> > +     },
> > +     {
> > +             .cfg = {
> > +                     .id = V4L2_CID_MPEG_VIDEO_H264_PROFILE,
> > +                     .def = V4L2_MPEG_VIDEO_H264_PROFILE_MAIN,
> > +                     .max = V4L2_MPEG_VIDEO_H264_PROFILE_HIGH,
> > +                     .menu_skip_mask =
> > +                             BIT(V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE) |
> > +                             BIT(V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED),
> > +             },
> > +             .codec_type = V4L2_PIX_FMT_H264_SLICE,
> > +     },
> > +     {
> > +             .cfg = {
> > +                     .id = V4L2_CID_STATELESS_H264_DECODE_MODE,
> > +                     .min = V4L2_STATELESS_H264_DECODE_MODE_FRAME_BASED,
> > +                     .def = V4L2_STATELESS_H264_DECODE_MODE_FRAME_BASED,
> > +                     .max = V4L2_STATELESS_H264_DECODE_MODE_FRAME_BASED,
> > +             },
> > +             .codec_type = V4L2_PIX_FMT_H264_SLICE,
> > +     },
> > +     {
> > +             .cfg = {
> > +                     .id = V4L2_CID_STATELESS_H264_START_CODE,
> > +                     .min = V4L2_STATELESS_H264_START_CODE_ANNEX_B,
> > +                     .def = V4L2_STATELESS_H264_START_CODE_ANNEX_B,
> > +                     .max = V4L2_STATELESS_H264_START_CODE_ANNEX_B,
> > +             },
> > +             .codec_type = V4L2_PIX_FMT_H264_SLICE,
> > +     }
> > +};
> > +#define NUM_CTRLS ARRAY_SIZE(mtk_stateless_controls)
> > +
> > +static const struct mtk_video_fmt mtk_video_formats[] = {
> > +     {
> > +             .fourcc = V4L2_PIX_FMT_H264_SLICE,
> > +             .type = MTK_FMT_DEC,
> > +             .num_planes = 1,
> > +     },
> > +     {
> > +             .fourcc = V4L2_PIX_FMT_MM21,
> > +             .type = MTK_FMT_FRAME,
> > +             .num_planes = 2,
> > +     },
> > +};
> > +#define NUM_FORMATS ARRAY_SIZE(mtk_video_formats)
> > +#define DEFAULT_OUT_FMT_IDX    0
> > +#define DEFAULT_CAP_FMT_IDX    1
> > +
> > +static const struct mtk_codec_framesizes mtk_vdec_framesizes[] = {
> > +     {
> > +             .fourcc = V4L2_PIX_FMT_H264_SLICE,
> > +             .stepwise = {  MTK_VDEC_MIN_W, MTK_VDEC_MAX_W, 16,
> > +                             MTK_VDEC_MIN_H, MTK_VDEC_MAX_H, 16 },
> > +     },
> > +};
> > +
> > +#define NUM_SUPPORTED_FRAMESIZE ARRAY_SIZE(mtk_vdec_framesizes)
> > +
> > +static void mtk_vdec_stateless_set_dst_payload(struct mtk_vcodec_ctx *ctx,
> > +                                            struct vdec_fb *fb)
> > +{
> > +     struct mtk_video_dec_buf *vdec_frame_buf =
> > +             container_of(fb, struct mtk_video_dec_buf, frame_buffer);
> > +     struct vb2_v4l2_buffer *vb = &vdec_frame_buf->m2m_buf.vb;
> > +     unsigned int cap_y_size = ctx->q_data[MTK_Q_DATA_DST].sizeimage[0];
> > +
> > +     vb2_set_plane_payload(&vb->vb2_buf, 0, cap_y_size);
> > +     if (ctx->q_data[MTK_Q_DATA_DST].fmt->num_planes == 2) {
> > +             unsigned int cap_c_size =
> > +                     ctx->q_data[MTK_Q_DATA_DST].sizeimage[1];
> > +
> > +             vb2_set_plane_payload(&vb->vb2_buf, 1, cap_c_size);
> > +     }
> > +}
> > +
> > +static struct vdec_fb *vdec_get_cap_buffer(struct mtk_vcodec_ctx *ctx,
> > +                                        struct vb2_v4l2_buffer *vb2_v4l2)
> > +{
> > +     struct mtk_video_dec_buf *framebuf =
> > +             container_of(vb2_v4l2, struct mtk_video_dec_buf, m2m_buf.vb);
> > +     struct vdec_fb *pfb = &framebuf->frame_buffer;
> > +     struct vb2_buffer *dst_buf = &vb2_v4l2->vb2_buf;
> > +
> > +     pfb = &framebuf->frame_buffer;
> > +     pfb->base_y.va = NULL;
> > +     pfb->base_y.dma_addr = vb2_dma_contig_plane_dma_addr(dst_buf, 0);
> > +     pfb->base_y.size = ctx->q_data[MTK_Q_DATA_DST].sizeimage[0];
> > +
> > +     if (ctx->q_data[MTK_Q_DATA_DST].fmt->num_planes == 2) {
> > +             pfb->base_c.va = NULL;
> > +             pfb->base_c.dma_addr =
> > +                     vb2_dma_contig_plane_dma_addr(dst_buf, 1);
> > +             pfb->base_c.size = ctx->q_data[MTK_Q_DATA_DST].sizeimage[1];
> > +     }
> > +     mtk_v4l2_debug(1,
> > +             "id=%d Framebuf  pfb=%p VA=%p Y_DMA=%pad C_DMA=%pad Size=%zx frame_count = %d",
> > +             dst_buf->index, pfb,
> > +             pfb->base_y.va, &pfb->base_y.dma_addr,
> > +             &pfb->base_c.dma_addr, pfb->base_y.size,
> > +             ctx->decoded_frame_cnt);
> > +
> > +     return pfb;
> > +}
> > +
> > +static void vb2ops_vdec_buf_request_complete(struct vb2_buffer *vb)
> > +{
> > +     struct mtk_vcodec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
> > +
> > +     v4l2_ctrl_request_complete(vb->req_obj.req, &ctx->ctrl_hdl);
> > +}
> > +
> > +static int fops_media_request_validate(struct media_request *mreq)
>
> I think this function should be moved to just before mtk_vcodec_media_ops.
> It's a bit weird to have this in the middle of the code.
>
> > +{
> > +     const unsigned int buffer_cnt = vb2_request_buffer_cnt(mreq);
> > +
> > +     switch (buffer_cnt) {
> > +     case 1:
> > +             /* We expect exactly one buffer with the request */
> > +             break;
> > +     case 0:
> > +             mtk_v4l2_err("No buffer provided with the request");
> > +             return -ENOENT;
> > +     default:
> > +             mtk_v4l2_err("Too many buffers (%d) provided with the request",
> > +                          buffer_cnt);
>
> These aren't errors: user errors are not something that should be reported
> in the kernel log, only driver/hw errors should be reported there.
>
> Use _debug instead.
>
> > +             return -EINVAL;
> > +     }
> > +
> > +     return vb2_request_validate(mreq);
> > +}
> > +
> > +static void mtk_vdec_worker(struct work_struct *work)
> > +{
> > +     struct mtk_vcodec_ctx *ctx =
> > +             container_of(work, struct mtk_vcodec_ctx, decode_work);
> > +     struct mtk_vcodec_dev *dev = ctx->dev;
> > +     struct vb2_v4l2_buffer *vb2_v4l2_src, *vb2_v4l2_dst;
> > +     struct vb2_buffer *vb2_src;
> > +     struct mtk_vcodec_mem *bs_src;
> > +     struct mtk_video_dec_buf *dec_buf_src;
> > +     struct media_request *src_buf_req;
> > +     struct vdec_fb *dst_buf;
> > +     bool res_chg = false;
> > +     int ret;
> > +
> > +     vb2_v4l2_src = v4l2_m2m_next_src_buf(ctx->m2m_ctx);
> > +     if (vb2_v4l2_src == NULL) {
> > +             v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx);
> > +             mtk_v4l2_debug(1, "[%d] no available source buffer", ctx->id);
> > +             return;
> > +     }
> > +
> > +     vb2_v4l2_dst = v4l2_m2m_next_dst_buf(ctx->m2m_ctx);
> > +     if (vb2_v4l2_dst == NULL) {
> > +             v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx);
> > +             mtk_v4l2_debug(1, "[%d] no available destination buffer", ctx->id);
> > +             return;
> > +     }
> > +
> > +     vb2_src = &vb2_v4l2_src->vb2_buf;
> > +     dec_buf_src = container_of(vb2_v4l2_src, struct mtk_video_dec_buf,
> > +                                m2m_buf.vb);
> > +     bs_src = &dec_buf_src->bs_buffer;
> > +
> > +     mtk_v4l2_debug(3, "[%d] (%d) id=%d, vb=%p buf_info = %p",
> > +                     ctx->id, src_buf->vb2_queue->type,
> > +                     src_buf->index, src_buf, src_buf_info);
> > +
> > +     bs_src->va = NULL;
> > +     bs_src->dma_addr = vb2_dma_contig_plane_dma_addr(vb2_src, 0);
> > +     bs_src->size = (size_t)vb2_src->planes[0].bytesused;
> > +
> > +     mtk_v4l2_debug(3, "[%d] Bitstream VA=%p DMA=%pad Size=%zx vb=%p",
> > +                     ctx->id, buf->va, &buf->dma_addr, buf->size, src_buf);
> > +     /* Apply request controls. */
> > +     src_buf_req = vb2_src->req_obj.req;
> > +     if (src_buf_req)
> > +             v4l2_ctrl_request_setup(src_buf_req, &ctx->ctrl_hdl);
> > +     else
> > +             mtk_v4l2_err("vb2 buffer media request is NULL");
> > +
> > +     dst_buf = vdec_get_cap_buffer(ctx, vb2_v4l2_dst);
> > +     v4l2_m2m_buf_copy_metadata(vb2_v4l2_src, vb2_v4l2_dst, true);
> > +     ret = vdec_if_decode(ctx, bs_src, dst_buf, &res_chg);
> > +     if (ret) {
> > +             mtk_v4l2_err(
> > +                     " <===[%d], src_buf[%d] sz=0x%zx pts=%llu vdec_if_decode() ret=%d res_chg=%d===>",
> > +                     ctx->id, vb2_src->index, bs_src->size,
> > +                     vb2_src->timestamp, ret, res_chg);
> > +             if (ret == -EIO) {
> > +                     mutex_lock(&ctx->lock);
> > +                     dec_buf_src->error = true;
> > +                     mutex_unlock(&ctx->lock);
> > +             }
> > +     }
> > +
> > +     mtk_vdec_stateless_set_dst_payload(ctx, dst_buf);
> > +
> > +     v4l2_m2m_buf_done_and_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx,
> > +             ret ? VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
> > +
> > +     v4l2_ctrl_request_complete(src_buf_req, &ctx->ctrl_hdl);
> > +}
> > +
> > +static void vb2ops_vdec_stateless_buf_queue(struct vb2_buffer *vb)
> > +{
> > +     struct mtk_vcodec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
> > +     struct vb2_v4l2_buffer *vb2_v4l2 = to_vb2_v4l2_buffer(vb);
> > +
> > +     mtk_v4l2_debug(3, "[%d] (%d) id=%d, vb=%p",
> > +                     ctx->id, vb->vb2_queue->type,
> > +                     vb->index, vb);
> > +
> > +     mutex_lock(&ctx->lock);
> > +     v4l2_m2m_buf_queue(ctx->m2m_ctx, vb2_v4l2);
> > +     mutex_unlock(&ctx->lock);
> > +     if (vb->vb2_queue->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
> > +             return;
> > +
> > +     mtk_v4l2_debug(3, "(%d) id=%d, bs=%p",
> > +             vb->vb2_queue->type, vb->index, src_buf);
> > +
> > +     /* If an OUTPUT buffer, we may need to update the state */
> > +     if (ctx->state == MTK_STATE_INIT) {
> > +             ctx->state = MTK_STATE_HEADER;
> > +             mtk_v4l2_debug(1, "Init driver from init to header.");
> > +     } else {
> > +             mtk_v4l2_debug(3, "[%d] already init driver %d",
> > +                             ctx->id, ctx->state);
> > +     }
> > +}
> > +
> > +static int mtk_vdec_flush_decoder(struct mtk_vcodec_ctx *ctx)
> > +{
> > +     bool res_chg;
> > +
> > +     return vdec_if_decode(ctx, NULL, NULL, &res_chg);
> > +}
> > +
> > +static int mtk_vcodec_dec_ctrls_setup(struct mtk_vcodec_ctx *ctx)
> > +{
> > +     unsigned int i;
> > +
> > +     v4l2_ctrl_handler_init(&ctx->ctrl_hdl, NUM_CTRLS);
> > +     if (ctx->ctrl_hdl.error) {
> > +             mtk_v4l2_err("v4l2_ctrl_handler_init failed\n");
> > +             return ctx->ctrl_hdl.error;
> > +     }
> > +
> > +     for (i = 0; i < NUM_CTRLS; i++) {
> > +             struct v4l2_ctrl_config cfg = mtk_stateless_controls[i].cfg;
> > +
> > +             v4l2_ctrl_new_custom(&ctx->ctrl_hdl, &cfg, NULL);
> > +             if (ctx->ctrl_hdl.error) {
> > +                     mtk_v4l2_err("Adding control %d failed %d",
> > +                                     i, ctx->ctrl_hdl.error);
> > +                     return ctx->ctrl_hdl.error;
> > +             }
> > +     }
> > +
> > +     v4l2_ctrl_handler_setup(&ctx->ctrl_hdl);
> > +
> > +     return 0;
> > +}
> > +
> > +const struct media_device_ops mtk_vcodec_media_ops = {
> > +     .req_validate   = fops_media_request_validate,
> > +     .req_queue      = v4l2_m2m_request_queue,
> > +};
> > +
> > +static void mtk_init_vdec_params(struct mtk_vcodec_ctx *ctx)
> > +{
> > +     struct vb2_queue *src_vq;
> > +
> > +     src_vq = v4l2_m2m_get_vq(ctx->m2m_ctx,
> > +                              V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE);
> > +
> > +     /* Support request api for output plane */
> > +     src_vq->supports_requests = true;
> > +     src_vq->requires_requests = true;
> > +}
> > +
> > +static int vb2ops_vdec_out_buf_validate(struct vb2_buffer *vb)
> > +{
> > +     struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> > +
> > +     vbuf->field = V4L2_FIELD_NONE;
> > +     return 0;
> > +}
> > +
> > +static struct vb2_ops mtk_vdec_request_vb2_ops = {
> > +     .queue_setup    = vb2ops_vdec_queue_setup,
> > +     .buf_prepare    = vb2ops_vdec_buf_prepare,
>
> Should be with the other .buf ops.
>
> > +     .wait_prepare   = vb2_ops_wait_prepare,
> > +     .wait_finish    = vb2_ops_wait_finish,
> > +     .start_streaming        = vb2ops_vdec_start_streaming,
> > +
> > +     .buf_queue      = vb2ops_vdec_stateless_buf_queue,
> > +     .buf_out_validate = vb2ops_vdec_out_buf_validate,
> > +     .buf_init       = vb2ops_vdec_buf_init,
> > +     .buf_finish     = vb2ops_vdec_buf_finish,
> > +     .stop_streaming = vb2ops_vdec_stop_streaming,
>
> Shouldn't stop_streaming be just after .start_streaming? It's weird to see
> them separated by other ops.

All suggestions applied, thanks!

Cheers,
Alex.

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v4 05/15] media: mtk-vcodec: vdec: support stateless API
  2021-04-29 12:10   ` Dafna Hirschfeld
@ 2021-05-13  9:21     ` Alexandre Courbot
  0 siblings, 0 replies; 35+ messages in thread
From: Alexandre Courbot @ 2021-05-13  9:21 UTC (permalink / raw)
  To: Dafna Hirschfeld
  Cc: Tiffany Lin, Andrew-CT Chen, Rob Herring, Yunfei Dong,
	Mauro Carvalho Chehab, Hans Verkuil, Linux Media Mailing List,
	LKML, moderated list:ARM/Mediatek SoC support

Hi Dafna,

On Thu, Apr 29, 2021 at 9:10 PM Dafna Hirschfeld
<dafna.hirschfeld@collabora.com> wrote:
>
>
>
> On 27.04.21 13:15, Alexandre Courbot wrote:
> > From: Yunfei Dong <yunfei.dong@mediatek.com>
> >
> > Support the stateless codec API that will be used by MT8183.
> >
> > Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
> > [acourbot: refactor, cleanup and split]
> > Co-developed-by: Alexandre Courbot <acourbot@chromium.org>
> > Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
> > ---
> >   drivers/media/platform/mtk-vcodec/Makefile    |   1 +
> >   .../platform/mtk-vcodec/mtk_vcodec_dec.c      |  66 +++-
> >   .../platform/mtk-vcodec/mtk_vcodec_dec.h      |   9 +-
> >   .../mtk-vcodec/mtk_vcodec_dec_stateless.c     | 370 ++++++++++++++++++
> >   .../platform/mtk-vcodec/mtk_vcodec_drv.h      |   3 +
> >   5 files changed, 446 insertions(+), 3 deletions(-)
> >   create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c
> >
> > diff --git a/drivers/media/platform/mtk-vcodec/Makefile b/drivers/media/platform/mtk-vcodec/Makefile
> > index 9c3cbb5b800e..4ba93d838ab6 100644
> > --- a/drivers/media/platform/mtk-vcodec/Makefile
> > +++ b/drivers/media/platform/mtk-vcodec/Makefile
> > @@ -12,6 +12,7 @@ mtk-vcodec-dec-y := vdec/vdec_h264_if.o \
> >               vdec_vpu_if.o \
> >               mtk_vcodec_dec.o \
> >               mtk_vcodec_dec_stateful.o \
> > +             mtk_vcodec_dec_stateless.o \
> >               mtk_vcodec_dec_pm.o \
> >
> >   mtk-vcodec-enc-y := venc/venc_vp8_if.o \
> > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
> > index 4ad2662a43b2..01c5333d6cff 100644
> > --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
> > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
> > @@ -46,6 +46,13 @@ static struct mtk_q_data *mtk_vdec_get_q_data(struct mtk_vcodec_ctx *ctx,
> >   static int vidioc_try_decoder_cmd(struct file *file, void *priv,
> >                               struct v4l2_decoder_cmd *cmd)
> >   {
> > +     struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv);
> > +
> > +     /* Use M2M stateless helper if relevant */
> > +     if (ctx->dev->vdec_pdata->uses_stateless_api)
> > +             return v4l2_m2m_ioctl_stateless_try_decoder_cmd(file, priv,
> > +                                                             cmd);
> > +
> >       switch (cmd->cmd) {
> >       case V4L2_DEC_CMD_STOP:
> >       case V4L2_DEC_CMD_START:
> > @@ -72,6 +79,10 @@ static int vidioc_decoder_cmd(struct file *file, void *priv,
> >       if (ret)
> >               return ret;
> >
> > +     /* Use M2M stateless helper if relevant */
> > +     if (ctx->dev->vdec_pdata->uses_stateless_api)
> > +             return v4l2_m2m_ioctl_stateless_decoder_cmd(file, priv, cmd);
> > +
> >       mtk_v4l2_debug(1, "decoder cmd=%u", cmd->cmd);
> >       dst_vq = v4l2_m2m_get_vq(ctx->m2m_ctx,
> >                               V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE);
> > @@ -414,7 +425,8 @@ static int vidioc_vdec_s_fmt(struct file *file, void *priv,
> >        * Setting OUTPUT format after OUTPUT buffers are allocated is invalid
> >        * if using the stateful API.
> >        */
> > -     if ((f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) &&
> > +     if (!dec_pdata->uses_stateless_api &&
> > +         (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) &&
> >           vb2_is_busy(&ctx->m2m_ctx->out_q_ctx.q)) {
> >               mtk_v4l2_err("out_q_ctx buffers already requested");
> >               ret = -EBUSY;
> > @@ -457,6 +469,7 @@ static int vidioc_vdec_s_fmt(struct file *file, void *priv,
> >               ctx->quantization = pix_mp->quantization;
> >               ctx->xfer_func = pix_mp->xfer_func;
> >
> > +             ctx->current_codec = fmt->fourcc;
> >               if (ctx->state == MTK_STATE_FREE) {
> >                       ret = vdec_if_init(ctx, q_data->fmt->fourcc);
> >                       if (ret) {
> > @@ -468,6 +481,49 @@ static int vidioc_vdec_s_fmt(struct file *file, void *priv,
> >               }
> >       }
> >
> > +     /*
> > +      * If using the stateless API, S_FMT should have the effect of setting
> > +      * the CAPTURE queue resolution no matter which queue it was called on.
> > +      */
> > +     if (dec_pdata->uses_stateless_api) {
> > +             ctx->picinfo.pic_w = pix_mp->width;
> > +             ctx->picinfo.pic_h = pix_mp->height;
> > +
> > +             ret = vdec_if_get_param(ctx, GET_PARAM_PIC_INFO, &ctx->picinfo);
> > +             if (ret) {
> > +                     mtk_v4l2_err("[%d]Error!! Get GET_PARAM_PICTURE_INFO Fail",
> > +                             ctx->id);
> > +                     return -EINVAL;
> > +             }
> > +
> > +             ctx->last_decoded_picinfo = ctx->picinfo;
> > +
> > +             if (ctx->q_data[MTK_Q_DATA_DST].fmt->num_planes == 1) {
> > +                     ctx->q_data[MTK_Q_DATA_DST].sizeimage[0] =
> > +                             ctx->picinfo.fb_sz[0] +
> > +                             ctx->picinfo.fb_sz[1];
> > +                     ctx->q_data[MTK_Q_DATA_DST].bytesperline[0] =
> > +                             ctx->picinfo.buf_w;
> > +             } else {
> > +                     ctx->q_data[MTK_Q_DATA_DST].sizeimage[0] =
> > +                             ctx->picinfo.fb_sz[0];
> > +                     ctx->q_data[MTK_Q_DATA_DST].bytesperline[0] =
> > +                             ctx->picinfo.buf_w;
> > +                     ctx->q_data[MTK_Q_DATA_DST].sizeimage[1] =
> > +                             ctx->picinfo.fb_sz[1];
> > +                     ctx->q_data[MTK_Q_DATA_DST].bytesperline[1] =
> > +                             ctx->picinfo.buf_w;
> > +             }
> > +
> > +             ctx->q_data[MTK_Q_DATA_DST].coded_width = ctx->picinfo.buf_w;
> > +             ctx->q_data[MTK_Q_DATA_DST].coded_height = ctx->picinfo.buf_h;
> > +             mtk_v4l2_debug(2, "[%d] vdec_if_init() num_plane = %d wxh=%dx%d pic wxh=%dx%d sz[0]=0x%x sz[1]=0x%x",
> > +                     ctx->id, pix_mp->num_planes,
> > +                     ctx->picinfo.buf_w, ctx->picinfo.buf_h,
> > +                     ctx->picinfo.pic_w, ctx->picinfo.pic_h,
> > +                     ctx->q_data[MTK_Q_DATA_DST].sizeimage[0],
> > +                     ctx->q_data[MTK_Q_DATA_DST].sizeimage[1]);
> > +     }
> >       return 0;
> >   }
> >
> > @@ -765,9 +821,15 @@ void vb2ops_vdec_stop_streaming(struct vb2_queue *q)
> >               while ((src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx))) {
> >                       struct mtk_video_dec_buf *buf_info = container_of(
> >                                src_buf, struct mtk_video_dec_buf, m2m_buf.vb);
> > -                     if (!buf_info->lastframe)
> > +                     if (!buf_info->lastframe) {
> > +                             struct media_request *req =
> > +                                     src_buf->vb2_buf.req_obj.req;
> >                               v4l2_m2m_buf_done(src_buf,
> >                                               VB2_BUF_STATE_ERROR);
> > +                             if (req)
> > +                                     v4l2_ctrl_request_complete(req,
> > +                                                             &ctx->ctrl_hdl);
> > +                     }
> >               }
> >               return;
> >       }
> > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h
> > index 6a18cb3bfe07..6b29d7d9ae15 100644
> > --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h
> > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h
> > @@ -45,6 +45,7 @@ struct vdec_fb {
> >    * @lastframe:              Intput buffer is last buffer - EOS
> >    * @error:          An unrecoverable error occurs on this buffer.
> >    * @frame_buffer:   Decode status, and buffer information of Capture buffer
> > + * @bs_buffer:       Output buffer info
> >    *
> >    * Note : These status information help us track and debug buffer state
> >    */
> > @@ -55,12 +56,18 @@ struct mtk_video_dec_buf {
> >       bool    queued_in_vb2;
> >       bool    queued_in_v4l2;
> >       bool    lastframe;
> > +
> >       bool    error;
> > -     struct vdec_fb  frame_buffer;
> > +
> > +     union {
> > +             struct vdec_fb  frame_buffer;
> > +             struct mtk_vcodec_mem   bs_buffer;
> > +     };
> >   };
> >
> >   extern const struct v4l2_ioctl_ops mtk_vdec_ioctl_ops;
> >   extern const struct v4l2_m2m_ops mtk_vdec_m2m_ops;
> > +extern const struct media_device_ops mtk_vcodec_media_ops;
> >
> >
> >   /*
> > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c
> > new file mode 100644
> > index 000000000000..75ddf53e2876
> > --- /dev/null
> > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c
>
> Hi, when compiling with -DDEBUG flag, I got some compilation errors for this file.

Nice catch, I've made sure the whole driver compiles with -DDEBUG.

Thanks,
Alex.

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v4 07/15] media: mtk-vcodec: vdec: add media device if using stateless api
  2021-05-13  8:05     ` Alexandre Courbot
@ 2021-05-13 15:07       ` Nicolas Dufresne
  0 siblings, 0 replies; 35+ messages in thread
From: Nicolas Dufresne @ 2021-05-13 15:07 UTC (permalink / raw)
  To: Alexandre Courbot, Hans Verkuil
  Cc: Tiffany Lin, Andrew-CT Chen, Rob Herring, Yunfei Dong,
	Mauro Carvalho Chehab, Linux Media Mailing List, LKML,
	moderated list:ARM/Mediatek SoC support

Le jeudi 13 mai 2021 à 17:05 +0900, Alexandre Courbot a écrit :
> Hi Hans, thanks for the review!
> 
> On Thu, Apr 29, 2021 at 4:28 PM Hans Verkuil <hverkuil-cisco@xs4all.nl> wrote:
> > 
> > On 27/04/2021 13:15, Alexandre Courbot wrote:
> > > From: Yunfei Dong <yunfei.dong@mediatek.com>
> > > 
> > > The stateless API requires a media device for issuing requests. Add one
> > > if we are being instantiated as a stateless decoder.
> > 
> > Why for the stateless decoder only? Why not create one for all?
> > 
> > It's not a blocker, but I would recommend looking at this.
> 
> Would there be any use in creating a media device for a stateful
> decoder that does not need to use requests?

The only thing I can think of is classification. In GStreamer support for
stateless decoders, I use the topology to classify what is a decoder by walking
the toplogy and making sure it's what I expect, and that there is no other
branches or functions that I may not support. This makes it more strict, so less
likely to confuse driver function.

Note that v4l2-compliance just use the same old heuristic we have used for
stateful, which is to check that one side have only RAW format, and the other
side have only encoded formats. It works too, it's just less strict.

> 
> Cheers,
> Alex.



^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v4 07/15] media: mtk-vcodec: vdec: add media device if using stateless api
  2021-04-27 11:15 ` [PATCH v4 07/15] media: mtk-vcodec: vdec: add media device if using stateless api Alexandre Courbot
  2021-04-29  7:28   ` Hans Verkuil
@ 2021-05-17  4:35   ` Hsin-Yi Wang
  2021-05-19  5:23     ` Alexandre Courbot
  1 sibling, 1 reply; 35+ messages in thread
From: Hsin-Yi Wang @ 2021-05-17  4:35 UTC (permalink / raw)
  To: Alexandre Courbot
  Cc: Tiffany Lin, Andrew-CT Chen, Rob Herring, Yunfei Dong,
	Mauro Carvalho Chehab, Hans Verkuil, linux-media, lkml,
	moderated list:ARM/Mediatek SoC support

On Tue, Apr 27, 2021 at 7:16 PM Alexandre Courbot <acourbot@chromium.org> wrote:
>
> From: Yunfei Dong <yunfei.dong@mediatek.com>
>
> The stateless API requires a media device for issuing requests. Add one
> if we are being instantiated as a stateless decoder.
>
> Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
> [acourbot: refactor, cleanup and split]
> Co-developed-by: Alexandre Courbot <acourbot@chromium.org>
> Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
> ---
>  drivers/media/platform/Kconfig                |  1 +
>  .../platform/mtk-vcodec/mtk_vcodec_dec_drv.c  | 39 +++++++++++++++++++
>  .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  2 +
>  3 files changed, 42 insertions(+)
>
> diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
> index ae1468aa1b4e..4154fdec2efb 100644
> --- a/drivers/media/platform/Kconfig
> +++ b/drivers/media/platform/Kconfig
> @@ -315,6 +315,7 @@ config VIDEO_MEDIATEK_VCODEC
>         select VIDEO_MEDIATEK_VCODEC_VPU if VIDEO_MEDIATEK_VPU
>         select VIDEO_MEDIATEK_VCODEC_SCP if MTK_SCP
>         select V4L2_H264
> +       select MEDIA_CONTROLLER

Should this also select MEDIA_CONTROLLER_REQUEST_API config?

Thanks
>         help
>           Mediatek video codec driver provides HW capability to
>           encode and decode in a range of video formats on MT8173
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
> index 533781d4680a..e942e28f96fe 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
> @@ -14,6 +14,7 @@
>  #include <media/v4l2-event.h>
>  #include <media/v4l2-mem2mem.h>
>  #include <media/videobuf2-dma-contig.h>
> +#include <media/v4l2-device.h>
>
>  #include "mtk_vcodec_drv.h"
>  #include "mtk_vcodec_dec.h"
> @@ -324,6 +325,31 @@ static int mtk_vcodec_probe(struct platform_device *pdev)
>                 goto err_event_workq;
>         }
>
> +       if (dev->vdec_pdata->uses_stateless_api) {
> +               dev->mdev_dec.dev = &pdev->dev;
> +               strscpy(dev->mdev_dec.model, MTK_VCODEC_DEC_NAME,
> +                               sizeof(dev->mdev_dec.model));
> +
> +               media_device_init(&dev->mdev_dec);
> +               dev->mdev_dec.ops = &mtk_vcodec_media_ops;
> +               dev->v4l2_dev.mdev = &dev->mdev_dec;
> +
> +               ret = v4l2_m2m_register_media_controller(dev->m2m_dev_dec,
> +                       dev->vfd_dec, MEDIA_ENT_F_PROC_VIDEO_DECODER);
> +               if (ret) {
> +                       mtk_v4l2_err("Failed to register media controller");
> +                       goto err_reg_cont;
> +               }
> +
> +               ret = media_device_register(&dev->mdev_dec);
> +               if (ret) {
> +                       mtk_v4l2_err("Failed to register media device");
> +                       goto err_media_reg;
> +               }
> +
> +               mtk_v4l2_debug(0, "media registered as /dev/media%d",
> +                       vfd_dec->num);
> +       }
>         ret = video_register_device(vfd_dec, VFL_TYPE_VIDEO, 0);
>         if (ret) {
>                 mtk_v4l2_err("Failed to register video device");
> @@ -336,6 +362,12 @@ static int mtk_vcodec_probe(struct platform_device *pdev)
>         return 0;
>
>  err_dec_reg:
> +       if (dev->vdec_pdata->uses_stateless_api)
> +               media_device_unregister(&dev->mdev_dec);
> +err_media_reg:
> +       if (dev->vdec_pdata->uses_stateless_api)
> +               v4l2_m2m_unregister_media_controller(dev->m2m_dev_dec);
> +err_reg_cont:
>         destroy_workqueue(dev->decode_workqueue);
>  err_event_workq:
>         v4l2_m2m_release(dev->m2m_dev_dec);
> @@ -368,6 +400,13 @@ static int mtk_vcodec_dec_remove(struct platform_device *pdev)
>
>         flush_workqueue(dev->decode_workqueue);
>         destroy_workqueue(dev->decode_workqueue);
> +
> +       if (media_devnode_is_registered(dev->mdev_dec.devnode)) {
> +               media_device_unregister(&dev->mdev_dec);
> +               v4l2_m2m_unregister_media_controller(dev->m2m_dev_dec);
> +               media_device_cleanup(&dev->mdev_dec);
> +       }
> +
>         if (dev->m2m_dev_dec)
>                 v4l2_m2m_release(dev->m2m_dev_dec);
>
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> index 78d4a7728ddf..10edd238c939 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> @@ -383,6 +383,7 @@ struct mtk_vcodec_enc_pdata {
>   * struct mtk_vcodec_dev - driver data
>   * @v4l2_dev: V4L2 device to register video devices for.
>   * @vfd_dec: Video device for decoder
> + * @mdev_dec: Media device for decoder
>   * @vfd_enc: Video device for encoder.
>   *
>   * @m2m_dev_dec: m2m device for decoder
> @@ -418,6 +419,7 @@ struct mtk_vcodec_enc_pdata {
>  struct mtk_vcodec_dev {
>         struct v4l2_device v4l2_dev;
>         struct video_device *vfd_dec;
> +       struct media_device mdev_dec;
>         struct video_device *vfd_enc;
>
>         struct v4l2_m2m_dev *m2m_dev_dec;
> --
> 2.31.1.498.g6c1eba8ee3d-goog
>
>
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v4 07/15] media: mtk-vcodec: vdec: add media device if using stateless api
  2021-05-17  4:35   ` Hsin-Yi Wang
@ 2021-05-19  5:23     ` Alexandre Courbot
  0 siblings, 0 replies; 35+ messages in thread
From: Alexandre Courbot @ 2021-05-19  5:23 UTC (permalink / raw)
  To: Hsin-Yi Wang
  Cc: Tiffany Lin, Andrew-CT Chen, Rob Herring, Yunfei Dong,
	Mauro Carvalho Chehab, Hans Verkuil, Linux Media Mailing List,
	lkml, moderated list:ARM/Mediatek SoC support

On Mon, May 17, 2021 at 1:35 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> On Tue, Apr 27, 2021 at 7:16 PM Alexandre Courbot <acourbot@chromium.org> wrote:
> >
> > From: Yunfei Dong <yunfei.dong@mediatek.com>
> >
> > The stateless API requires a media device for issuing requests. Add one
> > if we are being instantiated as a stateless decoder.
> >
> > Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
> > [acourbot: refactor, cleanup and split]
> > Co-developed-by: Alexandre Courbot <acourbot@chromium.org>
> > Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
> > ---
> >  drivers/media/platform/Kconfig                |  1 +
> >  .../platform/mtk-vcodec/mtk_vcodec_dec_drv.c  | 39 +++++++++++++++++++
> >  .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  2 +
> >  3 files changed, 42 insertions(+)
> >
> > diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
> > index ae1468aa1b4e..4154fdec2efb 100644
> > --- a/drivers/media/platform/Kconfig
> > +++ b/drivers/media/platform/Kconfig
> > @@ -315,6 +315,7 @@ config VIDEO_MEDIATEK_VCODEC
> >         select VIDEO_MEDIATEK_VCODEC_VPU if VIDEO_MEDIATEK_VPU
> >         select VIDEO_MEDIATEK_VCODEC_SCP if MTK_SCP
> >         select V4L2_H264
> > +       select MEDIA_CONTROLLER
>
> Should this also select MEDIA_CONTROLLER_REQUEST_API config?

Yup, it probably should. hantro and rkvdec also select it, so let's do the same.

Thanks!
Alex.

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v4 00/15] media: mtk-vcodec: support for MT8183 decoder
  2021-05-13  8:21   ` Alexandre Courbot
@ 2021-07-19 11:43     ` Dafna Hirschfeld
  0 siblings, 0 replies; 35+ messages in thread
From: Dafna Hirschfeld @ 2021-07-19 11:43 UTC (permalink / raw)
  To: Alexandre Courbot
  Cc: Tiffany Lin, Andrew-CT Chen, Rob Herring, Yunfei Dong,
	Mauro Carvalho Chehab, Hans Verkuil, Linux Media Mailing List,
	LKML, moderated list:ARM/Mediatek SoC support,
	Enric Balletbo i Serra, Collabora Kernel ML, Tomasz Figa,
	Eizan Miyamoto, Hsin-Yi Wang



On 13.05.21 10:21, Alexandre Courbot wrote:
> Hi Dafna,
> 
> On Thu, Apr 29, 2021 at 9:07 PM Dafna Hirschfeld
> <dafna.hirschfeld@collabora.com> wrote:
>>
>> Hi,
>>
>> On 27.04.21 13:15, Alexandre Courbot wrote:
>>> This series adds support for the stateless API into mtk-vcodec, by first
>>> separating the stateful ops into their own source file, and introducing
>>> a new set of ops suitable for stateless decoding. As such, support for
>>> stateful decoders should remain completely unaffected.
>>>
>>> This series has been tested with both MT8183 and MT8173. Decoding was
>>> working for both chips, and in the case of MT8173 no regression has been
>>> noticed.
>>
>> I am trying to test the decoder with this patchset using v4l2-ctl on mt8173.
>>
>> I am trying to decode an h264 file into V4L2_PIX_FMT_MT21C format.
>> I am not able to do it. It seems that the driver expects each buffer to start
>> with a nal starting code, and the v4l2-ctl command just read the files into
>> buffers without any parsing.
>>
>> Can you share the command and the files you used for testing?
> 
> I have been using the Chromium test suite (aka
> video_decode_accelerator_tests). I had doubts after reading your email
> but I tested the series again using this tool and confirmed it was
> working.

Hi, I have a chromeos userspace that I compiled. I use it to test the codec drivers on latest 5.14.
Could you share the exact command you use for your tests?

I used the command:
tast -verbose run -build=false 10.42.0.175 video.DecodeAccel*h264*

With that commands, all the tests that ends with 'VD' fail , the other tests pass.

The docs in [1] says that the command video_decode_accelerator_tests  does not require the "full Chrome browser stack",
does that mean that it can be compiled and run on userspace other than chromeos?
I could not find the instructions of how to compile and install that command. Could you instruct me to it?

The mt8173 doc [2] says that the supported video decoders are "H.264,  H.265 / HEVC,  MPEG-1/2/4"
But running 'v4l2-ctl --list-formats-out -d0' shows:

ioctl: VIDIOC_ENUM_FMT
     Type: Video Output Multiplanar

     [0]: 'H264' (H.264, compressed)
     [1]: 'VP80' (VP8, compressed)
     [2]: 'VP90' (VP9, compressed)

So the source code shows support for vp8, vp9 which is not stated in the official doc.
Do you know the explanation for that difference? Do you know if elm device should support vp8, vp9?

[1] https://chromium.googlesource.com/chromium/src/+/HEAD/docs/media/gpu/video_decoder_test_usage.md

[2] https://www.mediatek.com/products/tablets/mt8173

Thanks,
Dafna

> 
> Unfortunately this test is not easy to build, but maybe if you have a
> Chromium environment ready you can run it. mtk-vcodec does expect the
> input buffers to be split by NAL units (as per the spec [1] IIUC), so
> that would explain why v4l2-ctl failed (I assume that it also fails
> without this series?).
> 
> Maybe ffmpeg can also be used to exercice this driver with properly
> split NAL units, but I am not familiar with its use with V4L2. I'm
> also not sure it would be happy about the MT21C format that the driver
> outputs, or that it could pick the MDP to convert it to something
> readable...
> 
> Cheers,
> Alex.
> 
> [1] https://www.kernel.org/doc/html/latest/userspace-api/media/v4l/pixfmt-compressed.html#compressed-formats
> 

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v4 14/15] media: mtk-vcodec: venc: support START and STOP commands
  2021-04-27 11:15 ` [PATCH v4 14/15] media: mtk-vcodec: venc: support START and STOP commands Alexandre Courbot
@ 2021-08-04 12:53   ` Dafna Hirschfeld
  2021-08-05  9:56     ` Dafna Hirschfeld
  0 siblings, 1 reply; 35+ messages in thread
From: Dafna Hirschfeld @ 2021-08-04 12:53 UTC (permalink / raw)
  To: Alexandre Courbot, Tiffany Lin, Andrew-CT Chen, Rob Herring, Yunfei Dong
  Cc: Mauro Carvalho Chehab, Hans Verkuil, linux-media, linux-kernel,
	linux-mediatek



On 27.04.21 13:15, Alexandre Courbot wrote:
> The V4L2 encoder specification requires encoders to support the
> V4L2_ENC_CMD_START and V4L2_ENC_CMD_STOP commands. Add support for these
> to the mtk-vcodec encoder by reusing the same flush buffer as used by
> the decoder driver.
> 
> Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
> ---
>   .../platform/mtk-vcodec/mtk_vcodec_drv.h      |   2 +
>   .../platform/mtk-vcodec/mtk_vcodec_enc.c      | 123 +++++++++++++++++-
>   .../platform/mtk-vcodec/mtk_vcodec_enc_drv.c  |   4 +
>   3 files changed, 122 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> index c2f4cad6cfc2..1b61d722d313 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> @@ -252,6 +252,7 @@ struct vdec_pic_info {
>    * @last_decoded_picinfo: pic information get from latest decode
>    * @empty_flush_buf: a fake size-0 capture buffer that indicates flush. Only
>    *		     to be used with encoder and stateful decoder.
> + * @is_flushing: set to true if flushing is in progress.
>    * @current_codec: current set input codec, in V4L2 pixel format
>    *
>    * @colorspace: enum v4l2_colorspace; supplemental to pixelformat
> @@ -291,6 +292,7 @@ struct mtk_vcodec_ctx {
>   	struct work_struct encode_work;
>   	struct vdec_pic_info last_decoded_picinfo;
>   	struct v4l2_m2m_buffer empty_flush_buf;
> +	bool is_flushing;
>   
>   	u32 current_codec;
>   
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
> index 4831052f475d..8058331dc553 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
> @@ -659,6 +659,7 @@ static int vidioc_venc_dqbuf(struct file *file, void *priv,
>   			     struct v4l2_buffer *buf)
>   {
>   	struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv);
> +	int ret;
>   
>   	if (ctx->state == MTK_STATE_ABORT) {
>   		mtk_v4l2_err("[%d] Call on QBUF after unrecoverable error",
> @@ -666,7 +667,77 @@ static int vidioc_venc_dqbuf(struct file *file, void *priv,
>   		return -EIO;
>   	}
>   
> -	return v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf);
> +	ret = v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf);
> +	if (ret)
> +		return ret;
> +
> +	/*
> +	 * Complete flush if the user dequeued the 0-payload LAST buffer.
> +	 * We check the payload because a buffer with the LAST flag can also
> +	 * be seen during resolution changes. If we happen to be flushing at
> +	 * that time, the last buffer before the resolution changes could be
> +	 * misinterpreted for the buffer generated by the flush and terminate
> +	 * it earlier than we want.
> +	 */
> +	if (!V4L2_TYPE_IS_OUTPUT(buf->type) &&
> +	    buf->flags & V4L2_BUF_FLAG_LAST &&
> +	    buf->m.planes[0].bytesused == 0 &&
> +	    ctx->is_flushing) {
> +		/*
> +		 * Last CAPTURE buffer is dequeued, we can allow another flush
> +		 * to take place.
> +		 */
> +		ctx->is_flushing = false;
> +	}
> +
> +	return 0;
> +}
> +
> +static int vidioc_encoder_cmd(struct file *file, void *priv,
> +			      struct v4l2_encoder_cmd *cmd)
> +{
> +	struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv);
> +	struct vb2_queue *src_vq, *dst_vq;
> +	int ret;
> +
> +	ret = v4l2_m2m_ioctl_try_encoder_cmd(file, priv, cmd);
> +	if (ret)
> +		return ret;
> +
> +	/* Calling START or STOP is invalid if a flush is in progress */
> +	if (ctx->is_flushing)
> +		return -EBUSY;
> +
> +	mtk_v4l2_debug(1, "encoder cmd=%u", cmd->cmd);
> +
> +	dst_vq = v4l2_m2m_get_vq(ctx->m2m_ctx,
> +				V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE);
> +	switch (cmd->cmd) {
> +	case V4L2_ENC_CMD_STOP:
> +		src_vq = v4l2_m2m_get_vq(ctx->m2m_ctx,
> +				V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE);
> +		if (!vb2_is_streaming(src_vq)) {
> +			mtk_v4l2_debug(1, "Output stream is off. No need to flush.");
> +			return 0;
> +		}
> +		if (!vb2_is_streaming(dst_vq)) {
> +			mtk_v4l2_debug(1, "Capture stream is off. No need to flush.");
> +			return 0;
> +		}
> +		ctx->is_flushing = true;
> +		v4l2_m2m_buf_queue(ctx->m2m_ctx, &ctx->empty_flush_buf.vb);
> +		v4l2_m2m_try_schedule(ctx->m2m_ctx);
> +		break;
> +
> +	case V4L2_ENC_CMD_START:
> +		vb2_clear_last_buffer_dequeued(dst_vq);
> +		break;
> +
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	return 0;
>   }
>   
>   const struct v4l2_ioctl_ops mtk_venc_ioctl_ops = {
> @@ -702,6 +773,9 @@ const struct v4l2_ioctl_ops mtk_venc_ioctl_ops = {
>   
>   	.vidioc_g_selection		= vidioc_venc_g_selection,
>   	.vidioc_s_selection		= vidioc_venc_s_selection,
> +
> +	.vidioc_encoder_cmd		= vidioc_encoder_cmd,
> +	.vidioc_try_encoder_cmd		= v4l2_m2m_ioctl_try_encoder_cmd,
>   };
>   
>   static int vb2ops_venc_queue_setup(struct vb2_queue *vq,
> @@ -869,9 +943,27 @@ static void vb2ops_venc_stop_streaming(struct vb2_queue *q)
>   			dst_buf->vb2_buf.planes[0].bytesused = 0;
>   			v4l2_m2m_buf_done(dst_buf, VB2_BUF_STATE_ERROR);
>   		}
> +		/* STREAMOFF on the CAPTURE queue completes any ongoing flush */
> +		if (ctx->is_flushing) {
> +			mtk_v4l2_debug(1, "STREAMOFF called while flushing");
> +			v4l2_m2m_buf_remove_by_buf(&ctx->m2m_ctx->out_q_ctx,
> +						   &ctx->empty_flush_buf.vb);
> +			ctx->is_flushing = false;
> +		}
>   	} else {
> -		while ((src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx)))
> -			v4l2_m2m_buf_done(src_buf, VB2_BUF_STATE_ERROR);
> +		while ((src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx))) {
> +			if (src_buf != &ctx->empty_flush_buf.vb)
> +				v4l2_m2m_buf_done(src_buf, VB2_BUF_STATE_ERROR);
> +		}
> +		if (ctx->is_flushing) {
> +			/*
> +			 * If we are in the middle of a flush, put the flush
> +			 * buffer back into the queue so the next CAPTURE
> +			 * buffer gets returned with the LAST flag set.
> +			 */
> +			v4l2_m2m_buf_queue(ctx->m2m_ctx,
> +					   &ctx->empty_flush_buf.vb);
> +		}
>   	}
>   
>   	if ((q->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE &&
> @@ -971,12 +1063,15 @@ static int mtk_venc_param_change(struct mtk_vcodec_ctx *ctx)
>   {
>   	struct venc_enc_param enc_prm;
>   	struct vb2_v4l2_buffer *vb2_v4l2 = v4l2_m2m_next_src_buf(ctx->m2m_ctx);
> -	struct mtk_video_enc_buf *mtk_buf =
> -			container_of(vb2_v4l2, struct mtk_video_enc_buf,
> -				     m2m_buf.vb);
> -
> +	struct mtk_video_enc_buf *mtk_buf;
>   	int ret = 0;
>   
> +	/* Don't upcast the empty flush buffer */
> +	if (vb2_v4l2 == &ctx->empty_flush_buf.vb)
> +		return 0;

Hi, this check should also be in vb2ops_venc_buf_queue before upcasting

Thanks,
Dafna

> +
> +	mtk_buf = container_of(vb2_v4l2, struct mtk_video_enc_buf, m2m_buf.vb);
> +
>   	memset(&enc_prm, 0, sizeof(enc_prm));
>   	if (mtk_buf->param_change == MTK_ENCODE_PARAM_NONE)
>   		return 0;
> @@ -1062,6 +1157,20 @@ static void mtk_venc_worker(struct work_struct *work)
>   	}
>   
>   	src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx);
> +
> +	/*
> +	 * If we see the flush buffer, send an empty buffer with the LAST flag
> +	 * to the client. is_flushing will be reset at the time the buffer
> +	 * is dequeued.
> +	 */
> +	if (src_buf == &ctx->empty_flush_buf.vb) {
> +		vb2_set_plane_payload(&dst_buf->vb2_buf, 0, 0);
> +		dst_buf->flags |= V4L2_BUF_FLAG_LAST;
> +		v4l2_m2m_buf_done(dst_buf, VB2_BUF_STATE_DONE);
> +		v4l2_m2m_job_finish(ctx->dev->m2m_dev_enc, ctx->m2m_ctx);
> +		return;
> +	}
> +
>   	memset(&frm_buf, 0, sizeof(frm_buf));
>   	for (i = 0; i < src_buf->vb2_buf.num_planes ; i++) {
>   		frm_buf.fb_addr[i].dma_addr =
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c
> index 7d7b8cfc2cc5..2dd6fef896df 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c
> @@ -131,6 +131,7 @@ static int fops_vcodec_open(struct file *file)
>   	struct mtk_vcodec_dev *dev = video_drvdata(file);
>   	struct mtk_vcodec_ctx *ctx = NULL;
>   	int ret = 0;
> +	struct vb2_queue *src_vq;
>   
>   	ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
>   	if (!ctx)
> @@ -164,6 +165,9 @@ static int fops_vcodec_open(struct file *file)
>   				ret);
>   		goto err_m2m_ctx_init;
>   	}
> +	src_vq = v4l2_m2m_get_vq(ctx->m2m_ctx,
> +				V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE);
> +	ctx->empty_flush_buf.vb.vb2_buf.vb2_queue = src_vq;
>   	mtk_vcodec_enc_set_default_params(ctx);
>   
>   	if (v4l2_fh_is_singular(&ctx->fh)) {
> 

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v4 14/15] media: mtk-vcodec: venc: support START and STOP commands
  2021-08-04 12:53   ` Dafna Hirschfeld
@ 2021-08-05  9:56     ` Dafna Hirschfeld
  0 siblings, 0 replies; 35+ messages in thread
From: Dafna Hirschfeld @ 2021-08-05  9:56 UTC (permalink / raw)
  To: Alexandre Courbot, Tiffany Lin, Andrew-CT Chen, Rob Herring, Yunfei Dong
  Cc: Mauro Carvalho Chehab, Hans Verkuil, linux-media, linux-kernel,
	linux-mediatek



On 04.08.21 14:53, Dafna Hirschfeld wrote:
> 
> 
> On 27.04.21 13:15, Alexandre Courbot wrote:
>> The V4L2 encoder specification requires encoders to support the
>> V4L2_ENC_CMD_START and V4L2_ENC_CMD_STOP commands. Add support for these
>> to the mtk-vcodec encoder by reusing the same flush buffer as used by
>> the decoder driver.
>>
>> Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
>> ---
>>   .../platform/mtk-vcodec/mtk_vcodec_drv.h      |   2 +
>>   .../platform/mtk-vcodec/mtk_vcodec_enc.c      | 123 +++++++++++++++++-
>>   .../platform/mtk-vcodec/mtk_vcodec_enc_drv.c  |   4 +
>>   3 files changed, 122 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
>> index c2f4cad6cfc2..1b61d722d313 100644
>> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
>> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
>> @@ -252,6 +252,7 @@ struct vdec_pic_info {
>>    * @last_decoded_picinfo: pic information get from latest decode
>>    * @empty_flush_buf: a fake size-0 capture buffer that indicates flush. Only
>>    *             to be used with encoder and stateful decoder.
>> + * @is_flushing: set to true if flushing is in progress.
>>    * @current_codec: current set input codec, in V4L2 pixel format
>>    *
>>    * @colorspace: enum v4l2_colorspace; supplemental to pixelformat
>> @@ -291,6 +292,7 @@ struct mtk_vcodec_ctx {
>>       struct work_struct encode_work;
>>       struct vdec_pic_info last_decoded_picinfo;
>>       struct v4l2_m2m_buffer empty_flush_buf;
>> +    bool is_flushing;
>>       u32 current_codec;
>> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
>> index 4831052f475d..8058331dc553 100644
>> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
>> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
>> @@ -659,6 +659,7 @@ static int vidioc_venc_dqbuf(struct file *file, void *priv,
>>                    struct v4l2_buffer *buf)
>>   {
>>       struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv);
>> +    int ret;
>>       if (ctx->state == MTK_STATE_ABORT) {
>>           mtk_v4l2_err("[%d] Call on QBUF after unrecoverable error",
>> @@ -666,7 +667,77 @@ static int vidioc_venc_dqbuf(struct file *file, void *priv,
>>           return -EIO;
>>       }
>> -    return v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf);
>> +    ret = v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf);
>> +    if (ret)
>> +        return ret;
>> +
>> +    /*
>> +     * Complete flush if the user dequeued the 0-payload LAST buffer.
>> +     * We check the payload because a buffer with the LAST flag can also
>> +     * be seen during resolution changes. If we happen to be flushing at
>> +     * that time, the last buffer before the resolution changes could be
>> +     * misinterpreted for the buffer generated by the flush and terminate
>> +     * it earlier than we want.
>> +     */
>> +    if (!V4L2_TYPE_IS_OUTPUT(buf->type) &&
>> +        buf->flags & V4L2_BUF_FLAG_LAST &&
>> +        buf->m.planes[0].bytesused == 0 &&
>> +        ctx->is_flushing) {
>> +        /*
>> +         * Last CAPTURE buffer is dequeued, we can allow another flush
>> +         * to take place.
>> +         */
>> +        ctx->is_flushing = false;
>> +    }
>> +
>> +    return 0;
>> +}
>> +
>> +static int vidioc_encoder_cmd(struct file *file, void *priv,
>> +                  struct v4l2_encoder_cmd *cmd)
>> +{
>> +    struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv);
>> +    struct vb2_queue *src_vq, *dst_vq;
>> +    int ret;
>> +
>> +    ret = v4l2_m2m_ioctl_try_encoder_cmd(file, priv, cmd);
>> +    if (ret)
>> +        return ret;
>> +
>> +    /* Calling START or STOP is invalid if a flush is in progress */
>> +    if (ctx->is_flushing)
>> +        return -EBUSY;
>> +
>> +    mtk_v4l2_debug(1, "encoder cmd=%u", cmd->cmd);
>> +
>> +    dst_vq = v4l2_m2m_get_vq(ctx->m2m_ctx,
>> +                V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE);
>> +    switch (cmd->cmd) {
>> +    case V4L2_ENC_CMD_STOP:
>> +        src_vq = v4l2_m2m_get_vq(ctx->m2m_ctx,
>> +                V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE);
>> +        if (!vb2_is_streaming(src_vq)) {
>> +            mtk_v4l2_debug(1, "Output stream is off. No need to flush.");
>> +            return 0;
>> +        }
>> +        if (!vb2_is_streaming(dst_vq)) {
>> +            mtk_v4l2_debug(1, "Capture stream is off. No need to flush.");
>> +            return 0;
>> +        }
>> +        ctx->is_flushing = true;
>> +        v4l2_m2m_buf_queue(ctx->m2m_ctx, &ctx->empty_flush_buf.vb);
>> +        v4l2_m2m_try_schedule(ctx->m2m_ctx);
>> +        break;
>> +
>> +    case V4L2_ENC_CMD_START:
>> +        vb2_clear_last_buffer_dequeued(dst_vq);
>> +        break;
>> +
>> +    default:
>> +        return -EINVAL;
>> +    }
>> +
>> +    return 0;
>>   }
>>   const struct v4l2_ioctl_ops mtk_venc_ioctl_ops = {
>> @@ -702,6 +773,9 @@ const struct v4l2_ioctl_ops mtk_venc_ioctl_ops = {
>>       .vidioc_g_selection        = vidioc_venc_g_selection,
>>       .vidioc_s_selection        = vidioc_venc_s_selection,
>> +
>> +    .vidioc_encoder_cmd        = vidioc_encoder_cmd,
>> +    .vidioc_try_encoder_cmd        = v4l2_m2m_ioctl_try_encoder_cmd,
>>   };
>>   static int vb2ops_venc_queue_setup(struct vb2_queue *vq,
>> @@ -869,9 +943,27 @@ static void vb2ops_venc_stop_streaming(struct vb2_queue *q)
>>               dst_buf->vb2_buf.planes[0].bytesused = 0;
>>               v4l2_m2m_buf_done(dst_buf, VB2_BUF_STATE_ERROR);
>>           }
>> +        /* STREAMOFF on the CAPTURE queue completes any ongoing flush */
>> +        if (ctx->is_flushing) {
>> +            mtk_v4l2_debug(1, "STREAMOFF called while flushing");
>> +            v4l2_m2m_buf_remove_by_buf(&ctx->m2m_ctx->out_q_ctx,
>> +                           &ctx->empty_flush_buf.vb);
>> +            ctx->is_flushing = false;
>> +        }
>>       } else {
>> -        while ((src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx)))
>> -            v4l2_m2m_buf_done(src_buf, VB2_BUF_STATE_ERROR);
>> +        while ((src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx))) {
>> +            if (src_buf != &ctx->empty_flush_buf.vb)
>> +                v4l2_m2m_buf_done(src_buf, VB2_BUF_STATE_ERROR);
>> +        }
>> +        if (ctx->is_flushing) {
>> +            /*
>> +             * If we are in the middle of a flush, put the flush
>> +             * buffer back into the queue so the next CAPTURE
>> +             * buffer gets returned with the LAST flag set.
>> +             */
>> +            v4l2_m2m_buf_queue(ctx->m2m_ctx,
>> +                       &ctx->empty_flush_buf.vb);
>> +        }
>>       }
>>       if ((q->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE &&
>> @@ -971,12 +1063,15 @@ static int mtk_venc_param_change(struct mtk_vcodec_ctx *ctx)
>>   {
>>       struct venc_enc_param enc_prm;
>>       struct vb2_v4l2_buffer *vb2_v4l2 = v4l2_m2m_next_src_buf(ctx->m2m_ctx);
>> -    struct mtk_video_enc_buf *mtk_buf =
>> -            container_of(vb2_v4l2, struct mtk_video_enc_buf,
>> -                     m2m_buf.vb);
>> -
>> +    struct mtk_video_enc_buf *mtk_buf;
>>       int ret = 0;
>> +    /* Don't upcast the empty flush buffer */
>> +    if (vb2_v4l2 == &ctx->empty_flush_buf.vb)
>> +        return 0;
> 
> Hi, this check should also be in vb2ops_venc_buf_queue before upcasting

oh, sorry, the empty_flush_buf can't come from userspace so this test is not needed there.
> 
> Thanks,
> Dafna
> 
>> +
>> +    mtk_buf = container_of(vb2_v4l2, struct mtk_video_enc_buf, m2m_buf.vb);
>> +
>>       memset(&enc_prm, 0, sizeof(enc_prm));
>>       if (mtk_buf->param_change == MTK_ENCODE_PARAM_NONE)
>>           return 0;
>> @@ -1062,6 +1157,20 @@ static void mtk_venc_worker(struct work_struct *work)
>>       }
>>       src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx);
>> +
>> +    /*
>> +     * If we see the flush buffer, send an empty buffer with the LAST flag
>> +     * to the client. is_flushing will be reset at the time the buffer
>> +     * is dequeued.
>> +     */
>> +    if (src_buf == &ctx->empty_flush_buf.vb) {
>> +        vb2_set_plane_payload(&dst_buf->vb2_buf, 0, 0);
>> +        dst_buf->flags |= V4L2_BUF_FLAG_LAST;
>> +        v4l2_m2m_buf_done(dst_buf, VB2_BUF_STATE_DONE);
>> +        v4l2_m2m_job_finish(ctx->dev->m2m_dev_enc, ctx->m2m_ctx);
>> +        return;
>> +    }
>> +
>>       memset(&frm_buf, 0, sizeof(frm_buf));
>>       for (i = 0; i < src_buf->vb2_buf.num_planes ; i++) {
>>           frm_buf.fb_addr[i].dma_addr =
>> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c
>> index 7d7b8cfc2cc5..2dd6fef896df 100644
>> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c
>> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c
>> @@ -131,6 +131,7 @@ static int fops_vcodec_open(struct file *file)
>>       struct mtk_vcodec_dev *dev = video_drvdata(file);
>>       struct mtk_vcodec_ctx *ctx = NULL;
>>       int ret = 0;
>> +    struct vb2_queue *src_vq;
>>       ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
>>       if (!ctx)
>> @@ -164,6 +165,9 @@ static int fops_vcodec_open(struct file *file)
>>                   ret);
>>           goto err_m2m_ctx_init;
>>       }
>> +    src_vq = v4l2_m2m_get_vq(ctx->m2m_ctx,
>> +                V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE);
>> +    ctx->empty_flush_buf.vb.vb2_buf.vb2_queue = src_vq;
>>       mtk_vcodec_enc_set_default_params(ctx);
>>       if (v4l2_fh_is_singular(&ctx->fh)) {
>>

^ permalink raw reply	[flat|nested] 35+ messages in thread

end of thread, other threads:[~2021-08-05  9:56 UTC | newest]

Thread overview: 35+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-27 11:15 [PATCH v4 00/15] media: mtk-vcodec: support for MT8183 decoder Alexandre Courbot
2021-04-27 11:15 ` [PATCH v4 01/15] media: mtk-vcodec: vdec: move stateful ops into their own file Alexandre Courbot
2021-04-27 11:15 ` [PATCH v4 02/15] media: mtk-vcodec: vdec: handle firmware version field Alexandre Courbot
2021-04-27 11:15 ` [PATCH v4 03/15] media: mtk-vcodec: support version 2 of decoder firmware ABI Alexandre Courbot
2021-04-27 11:15 ` [PATCH v4 04/15] media: add Mediatek's MM21 format Alexandre Courbot
2021-04-29  7:16   ` Hans Verkuil
2021-04-27 11:15 ` [PATCH v4 05/15] media: mtk-vcodec: vdec: support stateless API Alexandre Courbot
2021-04-29  7:27   ` Hans Verkuil
2021-05-13  9:20     ` Alexandre Courbot
2021-04-29 12:10   ` Dafna Hirschfeld
2021-05-13  9:21     ` Alexandre Courbot
2021-04-27 11:15 ` [PATCH v4 06/15] media: mtk-vcodec: vdec: support stateless H.264 decoding Alexandre Courbot
2021-04-27 11:15 ` [PATCH v4 07/15] media: mtk-vcodec: vdec: add media device if using stateless api Alexandre Courbot
2021-04-29  7:28   ` Hans Verkuil
2021-05-13  8:05     ` Alexandre Courbot
2021-05-13 15:07       ` Nicolas Dufresne
2021-05-17  4:35   ` Hsin-Yi Wang
2021-05-19  5:23     ` Alexandre Courbot
2021-04-27 11:15 ` [PATCH v4 08/15] dt-bindings: media: document mediatek,mt8183-vcodec-dec Alexandre Courbot
2021-05-04 12:55   ` Alexandre Courbot
2021-05-04 14:48     ` Rob Herring
2021-04-27 11:15 ` [PATCH v4 09/15] media: mtk-vcodec: enable MT8183 decoder Alexandre Courbot
2021-04-27 11:15 ` [PATCH v4 10/15] media: mtk-vcodec: vdec: use helpers in VIDIOC_(TRY_)DECODER_CMD Alexandre Courbot
2021-04-27 11:15 ` [PATCH v4 11/15] media: mtk-vcodec: vdec: Support H264 profile control Alexandre Courbot
2021-04-27 11:15 ` [PATCH v4 12/15] media: mtk-vcodec: vdec: clamp OUTPUT resolution to hardware limits Alexandre Courbot
2021-04-27 11:15 ` [PATCH v4 13/15] media: mtk-vcodec: make flush buffer reusable by encoder Alexandre Courbot
2021-04-27 11:15 ` [PATCH v4 14/15] media: mtk-vcodec: venc: support START and STOP commands Alexandre Courbot
2021-08-04 12:53   ` Dafna Hirschfeld
2021-08-05  9:56     ` Dafna Hirschfeld
2021-04-27 11:15 ` [PATCH v4 15/15] media: mtk-vcodec: venc: make sure buffer exists in list before removing Alexandre Courbot
2021-04-29  7:35 ` [PATCH v4 00/15] media: mtk-vcodec: support for MT8183 decoder Hans Verkuil
2021-05-13  8:06   ` Alexandre Courbot
2021-04-29 12:07 ` Dafna Hirschfeld
2021-05-13  8:21   ` Alexandre Courbot
2021-07-19 11:43     ` Dafna Hirschfeld

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).