From: Ulf Hansson <ulf.hansson@linaro.org>
To: Christoph Hellwig <hch@lst.de>
Cc: Russell King <linux@armlinux.org.uk>,
Nicolas Pitre <nico@fluxnic.net>,
Aaro Koskinen <aaro.koskinen@iki.fi>,
Ben Dooks <ben-linux@fluff.org>,
"linux-mmc@vger.kernel.org" <linux-mmc@vger.kernel.org>,
Linux ARM <linux-arm-kernel@lists.infradead.org>,
linux-omap <linux-omap@vger.kernel.org>,
"list@263.net:IOMMU DRIVERS <iommu@lists.linux-foundation.org>,
Joerg Roedel <joro@8bytes.org>,"
<iommu@lists.linux-foundation.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 05/11] mmc: s3cmci: handle highmem pages
Date: Wed, 30 Jan 2019 08:57:47 +0100 [thread overview]
Message-ID: <CAPDyKFpcHv7KwuVpWcKjxj--n4YOFADWD5WzOCJ6Dca_JjqnAw@mail.gmail.com> (raw)
In-Reply-To: <20190114095804.27978-6-hch@lst.de>
On Mon, 14 Jan 2019 at 10:58, Christoph Hellwig <hch@lst.de> wrote:
>
> Instead of setting up a kernel pointer to track the current PIO address,
> track the offset in the current page, and do an atomic kmap for the page
> while doing the actual PIO operations.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
Nitpick: This one have some trailing whitespace errors, which git
complains about when I apply it.
No need to re-spin due to this, I can fix it up.
Kind regards
Uffe
> ---
> drivers/mmc/host/s3cmci.c | 107 +++++++++++++++++++-------------------
> drivers/mmc/host/s3cmci.h | 3 +-
> 2 files changed, 55 insertions(+), 55 deletions(-)
>
> diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
> index 10f5219b3b40..1be84426c817 100644
> --- a/drivers/mmc/host/s3cmci.c
> +++ b/drivers/mmc/host/s3cmci.c
> @@ -15,6 +15,7 @@
> #include <linux/dmaengine.h>
> #include <linux/dma-mapping.h>
> #include <linux/clk.h>
> +#include <linux/highmem.h>
> #include <linux/mmc/host.h>
> #include <linux/platform_device.h>
> #include <linux/cpufreq.h>
> @@ -317,26 +318,17 @@ static void s3cmci_check_sdio_irq(struct s3cmci_host *host)
> }
> }
>
> -static inline int get_data_buffer(struct s3cmci_host *host,
> - u32 *bytes, u32 **pointer)
> +static inline int get_data_buffer(struct s3cmci_host *host)
> {
> - struct scatterlist *sg;
> -
> - if (host->pio_active == XFER_NONE)
> - return -EINVAL;
> -
> - if ((!host->mrq) || (!host->mrq->data))
> - return -EINVAL;
> -
> if (host->pio_sgptr >= host->mrq->data->sg_len) {
> dbg(host, dbg_debug, "no more buffers (%i/%i)\n",
> host->pio_sgptr, host->mrq->data->sg_len);
> return -EBUSY;
> }
> - sg = &host->mrq->data->sg[host->pio_sgptr];
> + host->cur_sg = &host->mrq->data->sg[host->pio_sgptr];
>
> - *bytes = sg->length;
> - *pointer = sg_virt(sg);
> + host->pio_bytes = host->cur_sg->length;
> + host->pio_offset = host->cur_sg->offset;
>
> host->pio_sgptr++;
>
> @@ -422,11 +414,16 @@ static void s3cmci_disable_irq(struct s3cmci_host *host, bool transfer)
>
> static void do_pio_read(struct s3cmci_host *host)
> {
> - int res;
> u32 fifo;
> u32 *ptr;
> u32 fifo_words;
> void __iomem *from_ptr;
> + void *buf;
> +
> + if (host->pio_active == XFER_NONE)
> + goto done;
> + if (!host->mrq || !host->mrq->data)
> + goto done;
>
> /* write real prescaler to host, it might be set slow to fix */
> writel(host->prescaler, host->base + S3C2410_SDIPRE);
> @@ -435,20 +432,12 @@ static void do_pio_read(struct s3cmci_host *host)
>
> while ((fifo = fifo_count(host))) {
> if (!host->pio_bytes) {
> - res = get_data_buffer(host, &host->pio_bytes,
> - &host->pio_ptr);
> - if (res) {
> - host->pio_active = XFER_NONE;
> - host->complete_what = COMPLETION_FINALIZE;
> -
> - dbg(host, dbg_pio, "pio_read(): "
> - "complete (no more data).\n");
> - return;
> - }
> + if (get_data_buffer(host) < 0)
> + goto done;
>
> dbg(host, dbg_pio,
> - "pio_read(): new target: [%i]@[%p]\n",
> - host->pio_bytes, host->pio_ptr);
> + "pio_read(): new target: [%i]@[%zu]\n",
> + host->pio_bytes, host->pio_offset);
> }
>
> dbg(host, dbg_pio,
> @@ -470,63 +459,65 @@ static void do_pio_read(struct s3cmci_host *host)
> host->pio_count += fifo;
>
> fifo_words = fifo >> 2;
> - ptr = host->pio_ptr;
> - while (fifo_words--)
> +
> + buf = (kmap_atomic(sg_page(host->cur_sg)) + host->pio_offset);
> + ptr = buf;
> + while (fifo_words--) {
> *ptr++ = readl(from_ptr);
> - host->pio_ptr = ptr;
> + host->pio_offset += 4;
> + }
>
> if (fifo & 3) {
> u32 n = fifo & 3;
> u32 data = readl(from_ptr);
> - u8 *p = (u8 *)host->pio_ptr;
> + u8 *p = (u8 *)ptr;
>
> while (n--) {
> *p++ = data;
> data >>= 8;
> + host->pio_offset++;
> }
> }
> + kunmap_atomic(buf);
> }
>
> if (!host->pio_bytes) {
> - res = get_data_buffer(host, &host->pio_bytes, &host->pio_ptr);
> - if (res) {
> - dbg(host, dbg_pio,
> - "pio_read(): complete (no more buffers).\n");
> - host->pio_active = XFER_NONE;
> - host->complete_what = COMPLETION_FINALIZE;
> -
> - return;
> - }
> + if (get_data_buffer(host) < 0)
> + goto done;
> }
>
> enable_imask(host,
> S3C2410_SDIIMSK_RXFIFOHALF | S3C2410_SDIIMSK_RXFIFOLAST);
> + return;
> +
> +done:
> + host->pio_active = XFER_NONE;
> + host->complete_what = COMPLETION_FINALIZE;
> + dbg(host, dbg_pio, "pio_read(): complete (no more data).\n");
> }
>
> static void do_pio_write(struct s3cmci_host *host)
> {
> void __iomem *to_ptr;
> - int res;
> + void *buf;
> u32 fifo;
> u32 *ptr;
>
> + if (host->pio_active == XFER_NONE)
> + goto done;
> + if (!host->mrq || !host->mrq->data)
> + goto done;
> +
> to_ptr = host->base + host->sdidata;
>
> while ((fifo = fifo_free(host)) > 3) {
> if (!host->pio_bytes) {
> - res = get_data_buffer(host, &host->pio_bytes,
> - &host->pio_ptr);
> - if (res) {
> - dbg(host, dbg_pio,
> - "pio_write(): complete (no more data).\n");
> - host->pio_active = XFER_NONE;
> -
> - return;
> - }
> + if (get_data_buffer(host) < 0)
> + goto done;
>
> dbg(host, dbg_pio,
> - "pio_write(): new source: [%i]@[%p]\n",
> - host->pio_bytes, host->pio_ptr);
> + "pio_write(): new source: [%i]@[%zd]\n",
> + host->pio_bytes, host->pio_offset);
>
> }
>
> @@ -543,13 +534,20 @@ static void do_pio_write(struct s3cmci_host *host)
> host->pio_count += fifo;
>
> fifo = (fifo + 3) >> 2;
> - ptr = host->pio_ptr;
> - while (fifo--)
> + buf = (kmap_atomic(sg_page(host->cur_sg)) + host->pio_offset);
> + ptr = buf;
> + while (fifo--) {
> writel(*ptr++, to_ptr);
> - host->pio_ptr = ptr;
> + host->pio_offset += 4;
> + }
> + kunmap_atomic(buf);
> }
>
> enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF);
> + return;
> +done:
> + dbg(host, dbg_pio, "pio_write(): complete (no more data).\n");
> + host->pio_active = XFER_NONE;
> }
>
> static void pio_tasklet(unsigned long data)
> @@ -1055,6 +1053,7 @@ static int s3cmci_prepare_pio(struct s3cmci_host *host, struct mmc_data *data)
> BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR);
>
> host->pio_sgptr = 0;
> + host->cur_sg = &host->mrq->data->sg[host->pio_sgptr];
> host->pio_bytes = 0;
> host->pio_count = 0;
> host->pio_active = rw ? XFER_WRITE : XFER_READ;
> diff --git a/drivers/mmc/host/s3cmci.h b/drivers/mmc/host/s3cmci.h
> index 30c2c0dd1bc8..4320f7d832dc 100644
> --- a/drivers/mmc/host/s3cmci.h
> +++ b/drivers/mmc/host/s3cmci.h
> @@ -50,10 +50,11 @@ struct s3cmci_host {
>
> int dma_complete;
>
> + struct scatterlist *cur_sg;
> u32 pio_sgptr;
> u32 pio_bytes;
> u32 pio_count;
> - u32 *pio_ptr;
> + u32 pio_offset;
> #define XFER_NONE 0
> #define XFER_READ 1
> #define XFER_WRITE 2
> --
> 2.20.1
>
next prev parent reply other threads:[~2019-01-30 7:58 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-14 9:57 remove block layer bounce buffering for MMC Christoph Hellwig
2019-01-14 9:57 ` [PATCH 01/11] mmc: davinci: handle highmem pages Christoph Hellwig
2019-01-14 9:57 ` [PATCH 02/11] mmc: moxart: " Christoph Hellwig
2019-01-14 9:57 ` [PATCH 03/11] mmc: omap: " Christoph Hellwig
2019-01-14 9:57 ` [PATCH 04/11] mmc: omap: handle chained sglists Christoph Hellwig
2019-01-14 9:57 ` [PATCH 05/11] mmc: s3cmci: handle highmem pages Christoph Hellwig
2019-01-30 7:57 ` Ulf Hansson [this message]
2019-01-30 8:04 ` Christoph Hellwig
2019-01-30 8:16 ` Ulf Hansson
2019-01-14 9:57 ` [PATCH 06/11] mmc: s3cmci: handle chained sglists Christoph Hellwig
2019-01-14 9:58 ` [PATCH 07/11] mmc: mvsdio: handle highmem pages Christoph Hellwig
2019-01-14 16:29 ` Nicolas Pitre
2019-01-30 7:55 ` Ulf Hansson
2019-01-14 9:58 ` [PATCH 08/11] mmc: sh_mmcif: " Christoph Hellwig
2019-01-14 9:58 ` [PATCH 09/11] mmc: sh_mmcif: handle chained sglists Christoph Hellwig
2019-01-14 9:58 ` [PATCH 10/11] mmc: core: don't use block layer bounce buffers Christoph Hellwig
2019-01-14 9:58 ` [PATCH 11/11] dma-mapping: remove dma_max_pfn Christoph Hellwig
2019-01-14 10:26 ` remove block layer bounce buffering for MMC Ulf Hansson
2019-01-16 10:24 ` Arnd Bergmann
2019-01-16 13:51 ` Linus Walleij
2019-01-16 13:54 ` Arnd Bergmann
2019-01-14 16:52 ` Robin Murphy
2019-01-14 16:57 ` Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAPDyKFpcHv7KwuVpWcKjxj--n4YOFADWD5WzOCJ6Dca_JjqnAw@mail.gmail.com \
--to=ulf.hansson@linaro.org \
--cc=aaro.koskinen@iki.fi \
--cc=ben-linux@fluff.org \
--cc=hch@lst.de \
--cc=iommu@lists.linux-foundation.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=nico@fluxnic.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).