From: Ulf Hansson <ulf.hansson@linaro.org>
To: Stefan Agner <stefan@agner.ch>
Cc: Adrian Hunter <adrian.hunter@intel.com>,
Fabio Estevam <fabio.estevam@nxp.com>,
Haibo Chen <haibo.chen@nxp.com>,
Aisheng Dong <aisheng.dong@nxp.com>,
Michael Trimarchi <michael@amarulasolutions.com>,
Russell King <rmk+kernel@armlinux.org.uk>,
"linux-mmc@vger.kernel.org" <linux-mmc@vger.kernel.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 1/3] mmc: sdhci-esdhc-imx: get rid of support_vsel
Date: Mon, 2 Jul 2018 16:36:38 +0200 [thread overview]
Message-ID: <CAPDyKFqazWbHfn=poZcbDXddsUVk3=Mz5m6-K-6wC7FD6O1jLw@mail.gmail.com> (raw)
In-Reply-To: <20180628081331.13051-2-stefan@agner.ch>
On 28 June 2018 at 10:13, Stefan Agner <stefan@agner.ch> wrote:
> The field support_vsel is currently only used in the device tree
> case. Get rid of it. No change in behavior.
>
> Signed-off-by: Stefan Agner <stefan@agner.ch>
Thanks, applied for next!
Kind regards
Uffe
> ---
> drivers/mmc/host/sdhci-esdhc-imx.c | 8 ++------
> include/linux/platform_data/mmc-esdhc-imx.h | 2 --
> 2 files changed, 2 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
> index 6f444731754d..20a420b765b3 100644
> --- a/drivers/mmc/host/sdhci-esdhc-imx.c
> +++ b/drivers/mmc/host/sdhci-esdhc-imx.c
> @@ -1145,18 +1145,14 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
> &boarddata->tuning_start_tap);
>
> if (of_find_property(np, "no-1-8-v", NULL))
> - boarddata->support_vsel = false;
> - else
> - boarddata->support_vsel = true;
> + host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
>
> if (of_property_read_u32(np, "fsl,delay-line", &boarddata->delay_line))
> boarddata->delay_line = 0;
>
> mmc_of_parse_voltage(np, &host->ocr_mask);
>
> - /* sdr50 and sdr104 need work on 1.8v signal voltage */
> - if ((boarddata->support_vsel) && esdhc_is_usdhc(imx_data) &&
> - !IS_ERR(imx_data->pins_default)) {
> + if (esdhc_is_usdhc(imx_data) && !IS_ERR(imx_data->pins_default)) {
> imx_data->pins_100mhz = pinctrl_lookup_state(imx_data->pinctrl,
> ESDHC_PINCTRL_STATE_100MHZ);
> imx_data->pins_200mhz = pinctrl_lookup_state(imx_data->pinctrl,
> diff --git a/include/linux/platform_data/mmc-esdhc-imx.h b/include/linux/platform_data/mmc-esdhc-imx.h
> index 7daa78a2f342..640dec8b5b0c 100644
> --- a/include/linux/platform_data/mmc-esdhc-imx.h
> +++ b/include/linux/platform_data/mmc-esdhc-imx.h
> @@ -34,7 +34,6 @@ enum cd_types {
> * @cd_gpio: gpio for card_detect interrupt
> * @wp_type: type of write_protect method (see wp_types enum above)
> * @cd_type: type of card_detect method (see cd_types enum above)
> - * @support_vsel: indicate it supports 1.8v switching
> */
>
> struct esdhc_platform_data {
> @@ -43,7 +42,6 @@ struct esdhc_platform_data {
> enum wp_types wp_type;
> enum cd_types cd_type;
> int max_bus_width;
> - bool support_vsel;
> unsigned int delay_line;
> unsigned int tuning_step; /* The delay cell steps in tuning procedure */
> unsigned int tuning_start_tap; /* The start delay cell point in tuning procedure */
> --
> 2.18.0
>
next prev parent reply other threads:[~2018-07-02 14:36 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-28 8:13 [PATCH 0/3] mmc: sdhci-esdhc-imx: fix no UHS modes Stefan Agner
2018-06-28 8:13 ` [PATCH 1/3] mmc: sdhci-esdhc-imx: get rid of support_vsel Stefan Agner
2018-07-02 14:36 ` Ulf Hansson [this message]
2018-07-05 2:52 ` A.s. Dong
2018-07-05 11:16 ` Stefan Agner
2018-06-28 8:13 ` [PATCH 2/3] mmc: sdhci: add quirk to prevent higher speed modes Stefan Agner
2018-07-02 14:36 ` Ulf Hansson
2018-07-03 8:48 ` Stefan Agner
2018-07-04 10:07 ` Ulf Hansson
2018-07-04 10:55 ` Stefan Agner
2018-07-04 11:16 ` Ulf Hansson
2018-07-04 13:18 ` Stefan Agner
2018-06-28 8:13 ` [PATCH 3/3] mmc: sdhci-esdhc-imx: prevent stack from using " Stefan Agner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAPDyKFqazWbHfn=poZcbDXddsUVk3=Mz5m6-K-6wC7FD6O1jLw@mail.gmail.com' \
--to=ulf.hansson@linaro.org \
--cc=adrian.hunter@intel.com \
--cc=aisheng.dong@nxp.com \
--cc=fabio.estevam@nxp.com \
--cc=haibo.chen@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=michael@amarulasolutions.com \
--cc=rmk+kernel@armlinux.org.uk \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).