RE: [PATCH] mailbox: imx: Add context save/restore for suspend/resume

[Anson Huang <anson.huang@nxp.com>]

Gentle ping...


> Subject: RE: [PATCH] mailbox: imx: Add context save/restore for
> suspend/resume
> 
> 
> 
> > Subject: RE: [PATCH] mailbox: imx: Add context save/restore for
> > suspend/resume
> >
> > > From: Anson Huang <anson.huang@nxp.com>
> > > Sent: Friday, April 24, 2020 10:33 AM
> > >
> > > > Subject: RE: [PATCH] mailbox: imx: Add context save/restore for
> > > > suspend/resume
> > > >
> > > > > From: Anson Huang <Anson.Huang@nxp.com>
> > > > > Sent: Friday, April 24, 2020 7:01 AM
> > > > >
> > > > > For "mem" mode suspend on i.MX8 SoCs, MU settings could be lost
> > > > > because its power is off, so save/restore is needed for MU
> > > > > settings during
> > > > suspend/resume.
> > > > > However, the restore can ONLY be done when MU settings are
> > > > > actually lost, for the scenario of settings NOT lost in "freeze"
> > > > > mode suspend, since there could be still IPC going on multiple
> > > > > CPUs, restoring the MU settings could overwrite the TIE by
> > > > > mistake and cause system freeze, so need to make sure ONLY
> > > > > restore the MU settings when it is
> > > > powered off.
> > > > >
> > > > > Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> > > >
> > > > As mentioned before, we'd better keep the original author.
> > > >
> > > > > ---
> > > > >  drivers/mailbox/imx-mailbox.c | 35
> > > > > +++++++++++++++++++++++++++++++++++
> > > > >  1 file changed, 35 insertions(+)
> > > > >
> > > > > diff --git a/drivers/mailbox/imx-mailbox.c
> > > > > b/drivers/mailbox/imx-mailbox.c index 97bf0ac..b53cf63 100644
> > > > > --- a/drivers/mailbox/imx-mailbox.c
> > > > > +++ b/drivers/mailbox/imx-mailbox.c
> > > > > @@ -67,6 +67,8 @@ struct imx_mu_priv {
> > > > >  	struct clk		*clk;
> > > > >  	int			irq;
> > > > >
> > > > > +	u32 xcr;
> > > > > +
> > > > >  	bool			side_b;
> > > > >  };
> > > > >
> > > > > @@ -583,12 +585,45 @@ static const struct of_device_id
> > > > > imx_mu_dt_ids[] = {  };  MODULE_DEVICE_TABLE(of, imx_mu_dt_ids);
> > > > >
> > > > > +static int imx_mu_suspend_noirq(struct device *dev) {
> > > > > +	struct imx_mu_priv *priv = dev_get_drvdata(dev);
> > > > > +
> > > > > +	priv->xcr = imx_mu_read(priv, priv->dcfg->xCR);
> > > > > +
> > > > > +	return 0;
> > > > > +}
> > > > > +
> > > > > +static int imx_mu_resume_noirq(struct device *dev) {
> > > > > +	struct imx_mu_priv *priv = dev_get_drvdata(dev);
> > > > > +
> > > > > +	/*
> > > > > +	 * ONLY restore MU when context lost, the TIE could
> > > > > +	 * be set during noirq resume as there is MU data
> > > > > +	 * communication going on, and restore the saved
> > > > > +	 * value will overwrite the TIE and cause MU data
> > > > > +	 * send failed, may lead to system freeze. This issue
> > > > > +	 * is observed by testing freeze mode suspend.
> > > > > +	 */
> > > > > +	if (!imx_mu_read(priv, priv->dcfg->xCR))
> > > > > +		imx_mu_write(priv, priv->xcr, priv->dcfg->xCR);
> > > >
> > > > This could be separate patch if it aims to fix a specific corner case.
> > >
> > > This is NOT corner case, it can be reproduced with our imx_5.4.y
> > > very easily, and this issue cause me many days to debug...Also cause
> > > Clark's effort to help test it a lot for many days...
> > >
> >
> > Is this issue only happen for non-state lost case (eg. Freeze mode)?
> > If yes, it's a specific case and worth a separate patch to highlight it IMHO.
> >
> > BTW, it seems most drivers have this issue in current kernel because
> > they don't know whether the state are really lost, it seems like
> > kernel still doesn't support this well.
> >
> > > I do NOT think it makes sense to first send out your patch with bug
> > > for review, And then add another patch to fix it. 1 patch is enough
> > > for this
> > feature.
> > >
> >
> > Anyway, if you really want to go with one patch, for this case, we
> > usually could keep original author and add a small fix note in commit
> message.
> > (You could see many community guys do like this if you search kernel
> > commit
> > log)
> >
> > Basically we try our best to keep origin author in order to respect
> > others' work for community work.
> 
> I am fine with whoever is the author, my focus is the issue fix and easy rebase.
> If maintainer agrees that introduce a patch with bug and add another patch to
> fix is OK, then I can rework the patch into 2 patches.
> 
> Anson