RE: [PATCH V5 1/2] dt-bindings: firmware: imx: Move system control into dt-binding headfile

[Anson Huang <anson.huang@nxp.com>]

Hi, Marco


> Subject: Re: [PATCH V5 1/2] dt-bindings: firmware: imx: Move system control
> into dt-binding headfile
> 
> Hi Anson,
> 
> sorry for jumping in..
> 
> On 20-04-26 16:11, Anson Huang wrote:
> > From: Dong Aisheng <aisheng.dong@nxp.com>
> >
> > i.MX8 SoCs DTS file needs system control macro definitions, so move
> > them into dt-binding headfile, then include/linux/firmware/imx/types.h
> > can be removed and those drivers using it should be changed accordingly.
> >
> > Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
> > Signed-off-by: Jacky Bai <ping.bai@nxp.com>
> > Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> > ---
> > Changes since V4:
> > 	- Use another patch for new added system controls and PM clock types.
> > ---
> >  drivers/firmware/imx/imx-scu.c          |  1 -
> >  drivers/thermal/imx_sc_thermal.c        |  2 +-
> >  include/dt-bindings/firmware/imx/rsrc.h | 51
> ++++++++++++++++++++++++++
> >  include/linux/firmware/imx/sci.h        |  1 -
> >  include/linux/firmware/imx/types.h      | 65 ---------------------------------
> >  5 files changed, 52 insertions(+), 68 deletions(-)  delete mode
> > 100644 include/linux/firmware/imx/types.h
> >
> > diff --git a/drivers/firmware/imx/imx-scu.c
> > b/drivers/firmware/imx/imx-scu.c index f71eaa5..f3340fa 100644
> > --- a/drivers/firmware/imx/imx-scu.c
> > +++ b/drivers/firmware/imx/imx-scu.c
> > @@ -8,7 +8,6 @@
> >   */
> >
> >  #include <linux/err.h>
> > -#include <linux/firmware/imx/types.h>  #include
> > <linux/firmware/imx/ipc.h>  #include <linux/firmware/imx/sci.h>
> > #include <linux/interrupt.h>
> 
> You don't need this anymore here or was it a needless include?

I don't need this anymore, and since it is going to be removed, so this include also needs to be removed.

Thanks,
Anson