RE: [PATCH V2 1/2] usb: dwc3: Add node to update cache type setting

[Ran Wang <ran.wang_1@nxp.com>]

Hi Felipe,

On Friday, July 26, 2019 05:56, Rob Herring <robh@kernel.org> wrote:
> 
> On Wed, Jul 24, 2019 at 8:29 PM Ran Wang <ran.wang_1@nxp.com> wrote:
> >
> > Hi Rob,
> >
> > On Thursday, July 25, 2019 04:42 Rob Herring <robh@kernel.org> wrote:
> > >
> > > On Fri, Jul 12, 2019 at 02:42:05PM +0800, Ran Wang wrote:
> > > > Some Layerscape paltforms (such as LS1088A, LS2088A, etc)
> > > > encounter USB detect failues when adding dma-coherent to DWC3
> > > > node. This is because the HW default cache type configuration of
> > > > those SoC are not right, need to be updated in DTS.
> > > >
> > > > Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
> > > > ---
> > > > Change in v2:
> > > >     - New file.
> > > >
> > > >  Documentation/devicetree/bindings/usb/dwc3.txt | 43
> > > > ++++++++++++++++++++++++++
> > > >  1 file changed, 43 insertions(+)
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt
> > > > b/Documentation/devicetree/bindings/usb/dwc3.txt
> > > > index 8e5265e..7bc1cef 100644
> > > > --- a/Documentation/devicetree/bindings/usb/dwc3.txt
> > > > +++ b/Documentation/devicetree/bindings/usb/dwc3.txt
> > > > @@ -110,6 +110,43 @@ Optional properties:
> > > >   - in addition all properties from usb-xhci.txt from the current directory are
> > > >     supported as well
> > > >
> > > > +* Cache type nodes (optional)
> > > > +
> > > > +The Cache type node is used to tell how to configure cache type
> > > > +on 4 different transfer types: Data Read, Desc Read, Data Write
> > > > +and Desc write. For each treasfer type, controller has a 4-bit
> > > > +register field to enable different cache type. Quoted from DWC3
> > > > +data book Table 6-5
> > > Cache Type Bit Assignments:
> > > > +----------------------------------------------------------------
> > > > +MBUS_TYPE| bit[3]       |bit[2]       |bit[1]     |bit[0]
> > > > +----------------------------------------------------------------
> > > > +AHB      |Cacheable     |Bufferable   |Privilegge |Data
> > > > +AXI3     |Write Allocate|Read Allocate|Cacheable  |Bufferable
> > > > +AXI4     |Allocate Other|Allocate     |Modifiable |Bufferable
> > > > +AXI4     |Other Allocate|Allocate     |Modifiable |Bufferable
> > > > +Native   |Same as AXI   |Same as AXI  |Same as AXI|Same as AXI
> > > > +----------------------------------------------------------------
> > > > +Note: The AHB, AXI3, AXI4, and PCIe busses use different names
> > > > +for certain signals, which have the same meaning:
> > > > +  Bufferable = Posted
> > > > +  Cacheable = Modifiable = Snoop (negation of No Snoop)
> > >
> > > This should all be implied from the SoC specific compatible strings.
> >
> > Did you mean I could implement a soc driver which can be matched by
> compatible of 'fsl,ls1088a-dwc3' which will pass known bus type to DWC3 driver?
> If yes, how to pass?
> 
> Yes. The DT match table can have data associated with that compatible string.
> Beyond that, I'm not really familiar with the DWC3 driver.

Do you have any suggestion here?
If I add a glue driver on DWC3 core driver (I know you are not happy on this way), I don't
know how to pass the MBUS_TYPE info. from my glue driver to DWC3 core driver (I think cache
type related programming should be done by DWC3 core driver, am I right?)

Thanks
Ran