Thank you Bingbu for review, I'll implement your remarks in V2 that I'm working on now > Bogdan, thanks for your patch. > > On 9/11/20 12:24 AM, Bogdan Togorean wrote: > > The ADDI9036 is a complete, 45 MHz, front-end solution for charge > > coupled device (CCD) time of flight (TOF) imaging applications. > > > > It has 2-lane MIPI CSI-2 RAW12 data output and i2c control interface. > > > > The programming of calibration and firmware is performed by userspace > > SDK through CID_USER class IOCTLs. > > > > Signed-off-by: Bogdan Togorean > > --- > > MAINTAINERS | 10 + > > drivers/media/i2c/Kconfig | 14 + > > drivers/media/i2c/Makefile | 1 + > > drivers/media/i2c/addi9036.c | 673 +++++++++++++++++++++++++++++ > > include/uapi/linux/v4l2-controls.h | 6 + > > 5 files changed, 704 insertions(+) > > create mode 100644 drivers/media/i2c/addi9036.c > > > > diff --git a/MAINTAINERS b/MAINTAINERS > > index b5cfab015bd6..fb03ad9ca920 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -477,6 +477,16 @@ W: http://wiki.analog.com/AD7879 > > W: http://ez.analog.com/community/linux-device-drivers > > F: drivers/input/touchscreen/ad7879.c > > > > +ADDI9036 TOF FRONTEND DRIVER > > +M: Bogdan Togorean > > +L: linux-media@vger.kernel.org > > +S: Supported > > +W: https://www.analog.com/en/products/addi9036.html > > +W: http://ez.analog.com/community/linux-device-drivers > > +T: git git://linuxtv.org/media_tree.git > > +F: Documentation/devicetree/bindings/media/i2c/adi,addi9036.yaml > > +F: drivers/media/i2c/addi9036.c > > + > > ADDRESS SPACE LAYOUT RANDOMIZATION (ASLR) > > M: Jiri Kosina > > S: Maintained > > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig > > index c7ba76fee599..087dd307505d 100644 > > --- a/drivers/media/i2c/Kconfig > > +++ b/drivers/media/i2c/Kconfig > > @@ -725,6 +725,20 @@ config VIDEO_APTINA_PLL > > config VIDEO_SMIAPP_PLL > > tristate > > > > +config VIDEO_ADDI9036 > > + tristate "Analog Devices ADDI9036 ToF front-end support" > > + depends on I2C && VIDEO_V4L2 > > + select MEDIA_CONTROLLER > > + select VIDEO_V4L2_SUBDEV_API > > + select V4L2_FWNODE > > + select REGMAP_I2C > > + help > > + This is a Video4Linux2 driver for Analog Devices ADDI9036 > > + Time of Flight front-end. > > + > > + To compile this driver as a module, choose M here: the > > + module will be called addi9036. > > + > > config VIDEO_HI556 > > tristate "Hynix Hi-556 sensor support" > > depends on I2C && VIDEO_V4L2 > > diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile > > index f0a77473979d..631a7c7612ca 100644 > > --- a/drivers/media/i2c/Makefile > > +++ b/drivers/media/i2c/Makefile > > @@ -26,6 +26,7 @@ obj-$(CONFIG_VIDEO_AK7375) += ak7375.o > > obj-$(CONFIG_VIDEO_DW9714) += dw9714.o > > obj-$(CONFIG_VIDEO_DW9768) += dw9768.o > > obj-$(CONFIG_VIDEO_DW9807_VCM) += dw9807-vcm.o > > +obj-$(CONFIG_VIDEO_ADDI9036) += addi9036.o > > obj-$(CONFIG_VIDEO_ADV7170) += adv7170.o > > obj-$(CONFIG_VIDEO_ADV7175) += adv7175.o > > obj-$(CONFIG_VIDEO_ADV7180) += adv7180.o > > diff --git a/drivers/media/i2c/addi9036.c b/drivers/media/i2c/addi9036.c > > new file mode 100644 > > index 000000000000..76c3444058dc > > --- /dev/null > > +++ b/drivers/media/i2c/addi9036.c > > @@ -0,0 +1,673 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Driver for the Analog Devices ADDI9036 ToF front-end. > > + * > > + * Copyright (C) 2019-2020 Analog Devices, All Rights Reserved. > > + * > > + */ > > + > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > + > > +struct addi9036_mode_info { > > + u32 width; > > + u32 height; > > + u32 pixel_rate; > > + u32 link_freq_idx; > > +}; > > + > > +struct addi9036 { > > + struct regmap *regmap; > > + struct device *dev; > > + struct v4l2_subdev sd; > > + struct media_pad pad; > > + struct v4l2_fwnode_endpoint ep; > > + struct v4l2_mbus_framefmt fmt; > > + struct v4l2_rect crop; > > + > > + const struct addi9036_mode_info *current_mode; > > + > > + struct v4l2_ctrl_handler ctrls; > > + struct v4l2_ctrl *pixel_rate; > > + struct v4l2_ctrl *link_freq; > > + > > + /* lock to protect power state */ > > + struct mutex power_lock; > > + int power_count; > > + > > + struct gpio_desc *rst_gpio; > > + > > + /* controls */ > > + struct v4l2_ctrl *set_chip_config; > > + struct v4l2_ctrl *reg_read; > > +}; > > + > > +static inline struct addi9036 *to_addi9036(struct v4l2_subdev *sd) > > +{ > > + return container_of(sd, struct addi9036, sd); > > +} > > + > > +#define V4L2_CID_AD_DEV_SET_CHIP_CONFIG_QUERY > (V4L2_CID_USER_ADDI9036_BASE + 0) > > +#define V4L2_CID_AD_DEV_REG_READ_QUERY > (V4L2_CID_USER_ADDI9036_BASE + 1) > > + > > +static const struct reg_sequence addi9036_powerup_setting[] = { > > + { 0xc4c0, 0x001c }, > > + { 0xc4c3, 0x001c }, > > + { 0xc4d7, 0x0000 }, > > + { 0xc4d5, 0x0002 }, > > + { 0xc4da, 0x0001 }, > > + { 0xc4f0, 0x0000 }, > > + { 0xc427, 0x0003 }, > > + { 0xc427, 0x0001 }, > > + { 0xc427, 0x0000 }, > > + { 0xc426, 0x0030 }, > > + { 0xc426, 0x0010 }, > > + { 0xc426, 0x0000 }, > > + { 0xc423, 0x0080 }, > > + { 0xc431, 0x0080 }, > > + { 0x4001, 0x0007 }, > > + { 0x7c22, 0x0004 } > > +}; > > + > > +static const struct reg_sequence addi9036_powerdown_setting[] = { > > + { 0xc022, 0x0001 }, > > + { 0x4001, 0x0006 }, > > + { 0x7c22, 0x0004 }, > > + { 0xc431, 0x0082 }, > > + { 0xc423, 0x0000 }, > > + { 0xc426, 0x0020 }, > > + { 0xc427, 0x0002 }, > > + { 0xc4c0, 0x003c }, > > + { 0xc4c3, 0x003c }, > > + { 0xc4d5, 0x0003 }, > > + { 0xc4da, 0x0000 }, > > + { 0xc4d7, 0x0001 }, > > + { 0xc4f0, 0x0001 } > > +}; > > + > > +static const s64 link_freq_tbl[] = { > > + 110529000, > > + 221184000, > > +}; > Menu makes more sense than table, IMO. > > + > > +/* Elements of the structure must be ordered ascending by width & height */ > > +static const struct addi9036_mode_info addi9036_mode_info_data[] = { > > + { > > + .width = 640, > > + .height = 480, > > + .pixel_rate = 36864000, > > + .link_freq_idx = 0 /* an index in link_freq_tbl[] */ > > + }, > > + { > > + .width = 640, > > + .height = 960, > > + .pixel_rate = 73728000, > > + .link_freq_idx = 1 /* an index in link_freq_tbl[] */ > > + }, > > +}; > > + > > +static bool addi9306_readable_register(struct device *dev, unsigned int reg) > > +{ > > + if (((reg >= 0x4000) && (reg <= 0x6FFF)) || > > + ((reg >= 0x7C00) && (reg <= 0x7FFF)) || > > + ((reg >= 0xC000) && (reg <= 0xC200)) || > > + ((reg >= 0xC300) && (reg <= 0xC6BF))) > > + return true; > > + else > > + return false; > > +} > > + > > +static bool addi9306_writeable_register(struct device *dev, unsigned int reg) > > +{ > > + if (((reg >= 0x4000) && (reg <= 0x6FFF)) || > > + ((reg >= 0x7C00) && (reg <= 0x7FFF)) || > > + ((reg >= 0xC000) && (reg <= 0xC113)) || > > + ((reg >= 0xC300) && (reg <= 0xC7FF))) > > + return true; > > + else > > + return false; > > +} > Unnecessary parentheses around 'xxx >= 0xxxxx'. So how about > (...&&...||..) ? true : false, and the first 'dev' parameter is unused and could > be removed. > > > + > > +static const struct regmap_config addi9036_i2c_regmap_config = { > > + .reg_bits = 16, > > + .val_bits = 16, > > + > unnecessary blank line here? > > > + .max_register = 0xC7FF, > lower case. > > + .writeable_reg = addi9306_writeable_register, > > + .readable_reg = addi9306_readable_register, > > + .cache_type = REGCACHE_NONE, > > +}; > > + > > +static int addi9036_set_power_on(struct addi9036 *addi9036) > > +{ > > + int ret; > > + > > + if (addi9036->rst_gpio) > > + gpiod_set_value_cansleep(addi9036->rst_gpio, 0); > > + > > + ret = regmap_register_patch(addi9036->regmap, > addi9036_powerup_setting, > > + ARRAY_SIZE(addi9036_powerup_setting)); > > + if (ret) > > + dev_err(addi9036->dev, "Could not set power up registers\n"); > > + > > + return ret; > > +} > > + > > +static int addi9036_set_power_off(struct addi9036 *addi9036) > > +{ > > + int ret; > > + > > + ret = regmap_register_patch(addi9036->regmap, > > + addi9036_powerdown_setting, > > + ARRAY_SIZE(addi9036_powerdown_setting)); > > + if (ret) > > + dev_err(addi9036->dev, "could not set power down > registers\n"); > > + > > + if (addi9036->rst_gpio) > > + gpiod_set_value_cansleep(addi9036->rst_gpio, 1); > > + > > + return ret; > > +} > > Could we merge these 2 wrapper into one? it could reduce some code > duplication > and looks succinct. > > + > > +static int addi9036_s_power(struct v4l2_subdev *sd, int on) > > +{ > > + struct addi9036 *addi9036 = to_addi9036(sd); > > + int ret = 0; > > + > > + mutex_lock(&addi9036->power_lock); > > + > > + dev_dbg(addi9036->dev, "s_power: %d\n", on); > > This line can be out of protection. > > + > > + /* If the power count is modified from 0 to != 0 or from != 0 to 0, > > + * update the power state. > > + */ > > + if (addi9036->power_count == !on) { > > + if (on) > > + ret = addi9036_set_power_on(addi9036); > > + else > > + ret = addi9036_set_power_off(addi9036); > If you use single one power function, one line here is enough. > > + } > > + > > + if (!ret) { > > + /* Update the power count. */ > > + addi9036->power_count += on ? 1 : -1; > > + WARN(addi9036->power_count < 0, "Unbalanced power > count\n"); > > + WARN(addi9036->power_count > 1, "Duplicated s_power > call\n"); > > + } > > + > > + mutex_unlock(&addi9036->power_lock); > > + > > + return ret; > > +} > > + > > +static int addi9036_set_chip_config(struct addi9036 *addi9036, > > + struct v4l2_ctrl *ctrl) > > +{ > > + int index; > > + unsigned short *reg, *val; > > + > > + reg = (unsigned short *)(ctrl->p_new.p_u16); > > + val = (unsigned short *)(ctrl->p_new.p_u16 + 1); > > + > > + for (index = 0; index < ctrl->elems; index += 2) { > > + regmap_write(addi9036->regmap, *reg, *val); > > + reg += 2; > > + val += 2; > > + } > > + > > + return 0; > > +} > > + > > +static int addi9036_s_ctrl(struct v4l2_ctrl *ctrl) > > +{ > > + struct addi9036 *addi9036 = container_of(ctrl->handler, > > + struct addi9036, ctrls); > > + int ret = 0; > > + unsigned int val; > > + > > + switch (ctrl->id) { > > + case V4L2_CID_AD_DEV_SET_CHIP_CONFIG_QUERY: > > + ret = addi9036_set_chip_config(addi9036, ctrl); > > + break; > > + case V4L2_CID_AD_DEV_REG_READ_QUERY: > > + ret = regmap_read(addi9036->regmap, *(u16 *)(ctrl- > >p_new.p_u16), > > + &val); > > + if (ret) > > + dev_warn(addi9036->dev, > > + "could not read from register\n"); > > + else > > + *(u16 *)(ctrl->p_new.p_u16) = val; > > + break; > > + case V4L2_CID_PIXEL_RATE: > > + case V4L2_CID_LINK_FREQ: > > + break; > > + default: > > + dev_err(addi9036->dev, "%s > Unhandled: %x param=%x\n", > > + __func__, ctrl->id, ctrl->val); > > + ret = -EINVAL; > > + break; > > + } > > + > > + return ret; > > +} > > + > > +static const struct v4l2_ctrl_ops addi9036_ctrl_ops = { > > + .s_ctrl = addi9036_s_ctrl, > > +}; > > + > > +static const struct v4l2_ctrl_config addi9036_ctrl_chip_config = { > > + .ops = &addi9036_ctrl_ops, > > + .id = V4L2_CID_AD_DEV_SET_CHIP_CONFIG_QUERY, > > + .name = "chip_config", > > + .type = V4L2_CTRL_TYPE_U16, > > + .def = 0xFF, > > + .min = 0x00, > > + .max = 0xFFFF, > > + .step = 1, > > + .dims = { 2048 }, > > + .elem_size = 2 > > +}; > > + > > +static const struct v4l2_ctrl_config addi9036_ctrl_reg_read = { > > + .ops = &addi9036_ctrl_ops, > > + .id = V4L2_CID_AD_DEV_REG_READ_QUERY, > > + .name = "reg_read", > > + .type = V4L2_CTRL_TYPE_U16, > > + .def = 0, > > + .min = 0x00, > > + .max = 0xFFFF, > > + .step = 1 > > +}; > > + > > +static int addi9036_enum_mbus_code(struct v4l2_subdev *sd, > > + struct v4l2_subdev_pad_config *cfg, > > + struct v4l2_subdev_mbus_code_enum *code) > > +{ > > + if (code->index > 0) > > + return -EINVAL; > > + > > + code->code = MEDIA_BUS_FMT_SBGGR12_1X12; > > + > > + return 0; > > +} > > + > > +static int addi9036_enum_frame_size(struct v4l2_subdev *subdev, > > + struct v4l2_subdev_pad_config *cfg, > > + struct v4l2_subdev_frame_size_enum *fse) > > +{ > > + if (fse->code != MEDIA_BUS_FMT_SBGGR12_1X12) > > + return -EINVAL; > > + > > + if (fse->index >= ARRAY_SIZE(addi9036_mode_info_data)) > > + return -EINVAL; > > + > > + fse->min_width = addi9036_mode_info_data[fse->index].width; > > + fse->max_width = addi9036_mode_info_data[fse->index].width; > > + fse->min_height = addi9036_mode_info_data[fse->index].height; > > + fse->max_height = addi9036_mode_info_data[fse->index].height; > > + > > + return 0; > > +} > > + > > +static struct v4l2_mbus_framefmt * > > +addi9036_get_pad_format(struct addi9036 *addi9036, > > + struct v4l2_subdev_pad_config *cfg, > > + unsigned int pad, > > + enum v4l2_subdev_format_whence which) > > +{ > > + switch (which) { > > + case V4L2_SUBDEV_FORMAT_TRY: > > + return v4l2_subdev_get_try_format(&addi9036->sd, cfg, pad); > > + case V4L2_SUBDEV_FORMAT_ACTIVE: > > + return &addi9036->fmt; > > + default: > > + return NULL; > > + } > > +} > > + > > +static int addi9036_get_format(struct v4l2_subdev *sd, > > + struct v4l2_subdev_pad_config *cfg, > > + struct v4l2_subdev_format *format) > > +{ > > + struct addi9036 *addi9036 = to_addi9036(sd); > > + struct v4l2_mbus_framefmt *pad_format; > > + > > + pad_format = addi9036_get_pad_format(addi9036, cfg, format->pad, > > + format->which); > > + > > + if (!pad_format) > > + return -EINVAL; > > + > > + format->format = *pad_format; > > + > > + return 0; > > +} > > + > > +static struct v4l2_rect * > > +addi9036_get_pad_crop(struct addi9036 *addi9036, > > + struct v4l2_subdev_pad_config *cfg, > > + unsigned int pad, enum v4l2_subdev_format_whence which) > > +{ > > + switch (which) { > > + case V4L2_SUBDEV_FORMAT_TRY: > > + return v4l2_subdev_get_try_crop(&addi9036->sd, cfg, pad); > > + case V4L2_SUBDEV_FORMAT_ACTIVE: > > + return &addi9036->crop; > > + default: > > + return NULL; > > + } > > +} > > + > > +static const struct addi9036_mode_info * > > +addi9036_find_nearest_mode(unsigned int width, unsigned int height) > > +{ > > + unsigned int i; > > + > > + for (i = ARRAY_SIZE(addi9036_mode_info_data) - 1; i > 0; i--) { > > + if (addi9036_mode_info_data[i].width <= width && > > + addi9036_mode_info_data[i].height <= height) > > + break; > > + } > > + > > + return &addi9036_mode_info_data[i]; > > +} > Could v4l2_find_nearest_size() cover this? > > > + > > +static int addi9036_set_format(struct v4l2_subdev *sd, > > + struct v4l2_subdev_pad_config *cfg, > > + struct v4l2_subdev_format *format) > open parenthesis alignment > > > +{ > > + struct addi9036 *addi9036 = to_addi9036(sd); > > + struct v4l2_mbus_framefmt *framefmt; > > + struct v4l2_rect *crop; > > + const struct addi9036_mode_info *new_mode; > > + int ret; > > + > > + dev_dbg(addi9036->dev, "set_fmt: %x %dx%d\n", > > + format->format.code, format->format.width, > > + format->format.height); > > + > > + crop = addi9036_get_pad_crop(addi9036, cfg, format->pad, > > + format->which); > > + > > + if (!crop) > > + return -EINVAL; > > + > > + new_mode = addi9036_find_nearest_mode(format->format.width, > > + format->format.height); > > + crop->width = new_mode->width; > > + crop->height = new_mode->height; > > + > > + if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) { > > + ret = v4l2_ctrl_s_ctrl_int64(addi9036->pixel_rate, > > + new_mode->pixel_rate); > > + if (ret < 0) > > + return ret; > > + > > + ret = v4l2_ctrl_s_ctrl(addi9036->link_freq, > > + new_mode->link_freq_idx); > > + if (ret < 0) > > + return ret; > > + > > + addi9036->current_mode = new_mode; > > + } > > + > > + framefmt = addi9036_get_pad_format(addi9036, cfg, format->pad, > > + format->which); > > + > > + if (!framefmt) > > + return -EINVAL; > > + > > + framefmt->width = crop->width; > > + framefmt->height = crop->height; > > + framefmt->code = MEDIA_BUS_FMT_SBGGR12_1X12; > > + framefmt->field = V4L2_FIELD_NONE; > > + framefmt->colorspace = V4L2_COLORSPACE_SRGB; > > + > > + format->format = *framefmt; > > + > > + return 0; > > +} > > + > > +static int addi9036_entity_init_cfg(struct v4l2_subdev *subdev, > > + struct v4l2_subdev_pad_config *cfg) > > +{ > > + struct v4l2_subdev_format fmt = { 0 }; > > + > > + if (cfg) > > + fmt.which = V4L2_SUBDEV_FORMAT_TRY; > > + else > > + fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE; > > + > > + fmt.format.width = 640; > > + fmt.format.height = 960; > > Get from mode by proper index? > > + > > + addi9036_set_format(subdev, cfg, &fmt); > > + > > + return 0; > > +} > > + > > +static int addi9036_get_selection(struct v4l2_subdev *sd, > > + struct v4l2_subdev_pad_config *cfg, > > + struct v4l2_subdev_selection *sel) > open parenthesis alignment > > +{ > > + struct addi9036 *addi9036 = to_addi9036(sd); > > + > > + if (sel->target != V4L2_SEL_TGT_CROP) > > + return -EINVAL; > > + > > + sel->r = *addi9036_get_pad_crop(addi9036, cfg, sel->pad, sel->which); > > + > > + return 0; > > +} > > + > > +static int addi9036_s_stream(struct v4l2_subdev *subdev, int enable) > > +{ > > + struct addi9036 *addi9036 = to_addi9036(subdev); > > + > > + dev_dbg(addi9036->dev, "stream %d\n", enable); > > + > > + return 0; > > +} > > + > > +static const struct v4l2_subdev_core_ops addi9036_core_ops = { > > + .s_power = addi9036_s_power, > > +}; > > + > > +static const struct v4l2_subdev_video_ops addi9036_video_ops = { > > + .s_stream = addi9036_s_stream, > > +}; > > + > > +static const struct v4l2_subdev_pad_ops addi9036_subdev_pad_ops = { > > + .init_cfg = addi9036_entity_init_cfg, > > + .enum_mbus_code = addi9036_enum_mbus_code, > > + .enum_frame_size = addi9036_enum_frame_size, > > + .get_fmt = addi9036_get_format, > > + .set_fmt = addi9036_set_format, > > + .get_selection = addi9036_get_selection, > > +}; > > + > > +static const struct v4l2_subdev_ops addi9036_subdev_ops = { > > + .core = &addi9036_core_ops, > > + .video = &addi9036_video_ops, > > + .pad = &addi9036_subdev_pad_ops, > > +}; > > + > > +static int addi9036_probe(struct i2c_client *client) > > +{ > > + struct device *dev = &client->dev; > > + struct fwnode_handle *endpoint; > > + struct addi9036 *addi9036; > > + int ret; > > + > > + dev_dbg(dev, "%s: i2c addr = 0x%x\n", __func__, client->addr); > > + > > + addi9036 = devm_kzalloc(dev, sizeof(struct addi9036), GFP_KERNEL); > > + if (!addi9036) > > + return -ENOMEM; > > + > > + addi9036->dev = dev; > > + > > + addi9036->regmap = devm_regmap_init_i2c(client, > > + &addi9036_i2c_regmap_config); > > + if (IS_ERR(addi9036->regmap)) { > > + dev_err(dev, "Error initializing i2c regmap\n"); > > + return PTR_ERR(addi9036->regmap); > > + } > > + > > + mutex_init(&addi9036->power_lock); > > + > > + endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(dev), > NULL); > > + if (!endpoint) { > > + dev_err(dev, "endpoint node not found\n"); > > + return -EINVAL; > > + } > > + > > + ret = v4l2_fwnode_endpoint_parse(endpoint, &addi9036->ep); > > + if (ret < 0) { > > + dev_err(dev, "parsing endpoint node failed\n"); > > + return ret; > > + } > > + fwnode_handle_put(endpoint); > > + > > + if (addi9036->ep.bus_type != V4L2_MBUS_CSI2_DPHY) { > > + dev_err(dev, "invalid bus type, must be MIPI CSI2\n"); > > + return -EINVAL; > > + } > > + > > + addi9036->rst_gpio = gpiod_get_optional(dev, "reset", > GPIOD_OUT_HIGH); > > + if (IS_ERR(addi9036->rst_gpio)) { > > + dev_info(dev, "Unable to get \"reset\" gpio\n"); > > + return PTR_ERR(addi9036->rst_gpio); > > + } > > + > > + v4l2_ctrl_handler_init(&addi9036->ctrls, 4); > > + > > + addi9036->pixel_rate = v4l2_ctrl_new_std(&addi9036->ctrls, > > + &addi9036_ctrl_ops, > > + V4L2_CID_PIXEL_RATE, > > + 1, INT_MAX, 1, 1); > open parenthesis alignment > > > + addi9036->link_freq = v4l2_ctrl_new_int_menu(&addi9036->ctrls, > > + &addi9036_ctrl_ops, > > + V4L2_CID_LINK_FREQ, > > + ARRAY_SIZE( > > + link_freq_tbl) - 1, > > + 0, link_freq_tbl); > > + if (addi9036->link_freq) > > + addi9036->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY; > > + > > + addi9036->set_chip_config = v4l2_ctrl_new_custom(&addi9036->ctrls, > > + &addi9036_ctrl_chip_config, > > + NULL); > ditto, alignment. > > + > > + addi9036->reg_read = v4l2_ctrl_new_custom(&addi9036->ctrls, > > + &addi9036_ctrl_reg_read, > > + NULL); > These two ctrls are used for debug? > > > + > > + addi9036->sd.ctrl_handler = &addi9036->ctrls; > > + > > + if (addi9036->ctrls.error) { > > + dev_err(dev, "%s: control initialization error %d\n", > > + __func__, addi9036->ctrls.error); > > + ret = addi9036->ctrls.error; > > + goto free_ctrl; > > + } > > + > > + v4l2_i2c_subdev_init(&addi9036->sd, client, &addi9036_subdev_ops); > > + addi9036->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; > > + addi9036->pad.flags = MEDIA_PAD_FL_SOURCE; > > + addi9036->sd.dev = &client->dev; > > + addi9036->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; > > + > > + ret = media_entity_pads_init(&addi9036->sd.entity, 1, &addi9036->pad); > > + > > + if (ret < 0) { > > + dev_err(dev, "could not register media entity\n"); > > + goto free_ctrl; > > + } > > + > > + ret = addi9036_s_power(&addi9036->sd, true); > > + if (ret < 0) { > > + dev_err(dev, "could not power up addi9036\n"); > > + goto free_entity; > > + } > > + > > + dev_info(dev, "addi9036 detected at address 0x%02x\n", client->addr); > dev_dbg(...), and why here? > > + > > + ret = addi9036_s_power(&addi9036->sd, false); > > + if (ret < 0) { > > + dev_err(dev, "could not power down addi9036\n"); > > + goto free_entity; > > + } > Any chance to use pm runtime? > > > + > > + addi9036_entity_init_cfg(&addi9036->sd, NULL); > > + > > + ret = v4l2_async_register_subdev(&addi9036->sd); > > + if (ret < 0) > > + dev_err(dev, "could not register v4l2 device\n"); > > + > > + return 0; > > + > > +free_entity: > > + media_entity_cleanup(&addi9036->sd.entity); > > +free_ctrl: > > + v4l2_ctrl_handler_free(&addi9036->ctrls); > > + mutex_destroy(&addi9036->power_lock); > > + > > + return ret; > > +} > > + > > +static int addi9036_remove(struct i2c_client *client) > > +{ > > + struct v4l2_subdev *sd = i2c_get_clientdata(client); > > + struct addi9036 *addi9036 = to_addi9036(sd); > > + > > + v4l2_async_unregister_subdev(&addi9036->sd); > > + media_entity_cleanup(&addi9036->sd.entity); > > + if (addi9036->rst_gpio) > > + gpiod_put(addi9036->rst_gpio); > > + v4l2_ctrl_handler_free(&addi9036->ctrls); > > + mutex_destroy(&addi9036->power_lock); > > + > > + return 0; > > +} > > + > > +static const struct i2c_device_id addi9036_id[] = { > > + { "addi9036", 0 }, > > + {} > > +}; > > +MODULE_DEVICE_TABLE(i2c, addi9036_id); > > + > > +static const struct of_device_id addi9036_of_match[] = { > > + { .compatible = "adi,addi9036" }, > > + { /* sentinel */ } > > +}; > > +MODULE_DEVICE_TABLE(of, addi9036_of_match); > > + > > +static struct i2c_driver addi9036_i2c_driver = { > > + .driver = { > > + .of_match_table = addi9036_of_match, > > + .name = "addi9036", > > + }, > > + .probe_new = addi9036_probe, > > + .remove = addi9036_remove, > > + .id_table = addi9036_id, > > +}; > > + > > +module_i2c_driver(addi9036_i2c_driver); > > + > > +MODULE_DESCRIPTION("Analog Devices ADDI9036 Camera Driver"); > > +MODULE_AUTHOR("Bogdan Togorean"); > > +MODULE_LICENSE("GPL v2"); > > diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2- > controls.h > > index 62271418c1be..f88b56479bc1 100644 > > --- a/include/uapi/linux/v4l2-controls.h > > +++ b/include/uapi/linux/v4l2-controls.h > > @@ -198,6 +198,12 @@ enum v4l2_colorfx { > > */ > > #define V4L2_CID_USER_ATMEL_ISC_BASE (V4L2_CID_USER_BASE + > 0x10c0) > > > > +/* > > + * The base for the addi9036 driver controls. > > + * We reserve 16 controls for this driver. > > + */ > > +#define V4L2_CID_USER_ADDI9036_BASE (V4L2_CID_USER_BASE + > 0x10e0) > > + > > /* MPEG-class control IDs */ > > /* The MPEG controls are applicable to all codec controls > > * and the 'MPEG' part of the define is historical */ > > > > -- > Best regards, > Bingbu Cao Best regards, Bogdan