From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932325AbcC2Qzb (ORCPT ); Tue, 29 Mar 2016 12:55:31 -0400 Received: from mezzanine.sirena.org.uk ([106.187.55.193]:51814 "EHLO mezzanine.sirena.org.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752809AbcC2Qz3 (ORCPT ); Tue, 29 Mar 2016 12:55:29 -0400 From: Mark Brown To: Chen-Yu Tsai , Mark Brown Cc: linux-kernel@vger.kernel.org In-Reply-To: Message-Id: Date: Tue, 29 Mar 2016 09:55:23 -0700 X-SA-Exim-Connect-IP: 64.55.107.4 X-SA-Exim-Mail-From: broonie@sirena.org.uk Subject: Applied "regulator: axp20x: support AXP809 variant" to the regulator tree X-SA-Exim-Version: 4.2.1 (built Mon, 26 Dec 2011 16:24:06 +0000) X-SA-Exim-Scanned: Yes (on mezzanine.sirena.org.uk) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The patch regulator: axp20x: support AXP809 variant has been applied to the regulator tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >>From 6387990e059d2a30b2c668bfa7e06f8922cf7483 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 29 Mar 2016 17:22:27 +0800 Subject: [PATCH] regulator: axp20x: support AXP809 variant The X-Powers AXP809 PMIC has a similar set of regulators as the AXP221, though a few LDOs were removed, and a new switch output added. Like the AXP221, AXP809 also has DC1SW and DC5LDO, which are internally chained to DCDC1 and DCDC5, respectively. Add support for this new variant. Also remove the "axp22x_" prefix from DC1SW/DC5LDO supply handling code, as the AXP809 uses it as well. Signed-off-by: Chen-Yu Tsai Signed-off-by: Mark Brown --- drivers/regulator/axp20x-regulator.c | 119 ++++++++++++++++++++++++++--------- 1 file changed, 90 insertions(+), 29 deletions(-) diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c index 40cd894e4df5..6a601f377019 100644 --- a/drivers/regulator/axp20x-regulator.c +++ b/drivers/regulator/axp20x-regulator.c @@ -224,6 +224,61 @@ static const struct regulator_desc axp22x_regulators[] = { AXP_DESC_FIXED(AXP22X, RTC_LDO, "rtc_ldo", "ips", 3000), }; +static const struct regulator_linear_range axp809_dcdc4_ranges[] = { + REGULATOR_LINEAR_RANGE(600000, 0x0, 0x2f, 20000), + REGULATOR_LINEAR_RANGE(1800000, 0x30, 0x38, 100000), +}; + +static const struct regulator_linear_range axp809_dldo1_ranges[] = { + REGULATOR_LINEAR_RANGE(700000, 0x0, 0x1a, 100000), + REGULATOR_LINEAR_RANGE(3400000, 0x1b, 0x1f, 200000), +}; + +static const struct regulator_desc axp809_regulators[] = { + AXP_DESC(AXP809, DCDC1, "dcdc1", "vin1", 1600, 3400, 100, + AXP22X_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(1)), + AXP_DESC(AXP809, DCDC2, "dcdc2", "vin2", 600, 1540, 20, + AXP22X_DCDC2_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, BIT(2)), + AXP_DESC(AXP809, DCDC3, "dcdc3", "vin3", 600, 1860, 20, + AXP22X_DCDC3_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, BIT(3)), + AXP_DESC_RANGES(AXP809, DCDC4, "dcdc4", "vin4", axp809_dcdc4_ranges, + 57, AXP22X_DCDC4_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, + BIT(4)), + AXP_DESC(AXP809, DCDC5, "dcdc5", "vin5", 1000, 2550, 50, + AXP22X_DCDC5_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(5)), + /* secondary switchable output of DCDC1 */ + AXP_DESC_SW(AXP809, DC1SW, "dc1sw", NULL, AXP22X_PWR_OUT_CTRL2, + BIT(7)), + /* LDO regulator internally chained to DCDC5 */ + AXP_DESC(AXP809, DC5LDO, "dc5ldo", NULL, 700, 1400, 100, + AXP22X_DC5LDO_V_OUT, 0x7, AXP22X_PWR_OUT_CTRL1, BIT(0)), + AXP_DESC(AXP809, ALDO1, "aldo1", "aldoin", 700, 3300, 100, + AXP22X_ALDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(6)), + AXP_DESC(AXP809, ALDO2, "aldo2", "aldoin", 700, 3300, 100, + AXP22X_ALDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(7)), + AXP_DESC(AXP809, ALDO3, "aldo3", "aldoin", 700, 3300, 100, + AXP22X_ALDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(5)), + AXP_DESC_RANGES(AXP809, DLDO1, "dldo1", "dldoin", axp809_dldo1_ranges, + 32, AXP22X_DLDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, + BIT(3)), + AXP_DESC(AXP809, DLDO2, "dldo2", "dldoin", 700, 3300, 100, + AXP22X_DLDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(4)), + AXP_DESC(AXP809, ELDO1, "eldo1", "eldoin", 700, 3300, 100, + AXP22X_ELDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(0)), + AXP_DESC(AXP809, ELDO2, "eldo2", "eldoin", 700, 3300, 100, + AXP22X_ELDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(1)), + AXP_DESC(AXP809, ELDO3, "eldo3", "eldoin", 700, 3300, 100, + AXP22X_ELDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(2)), + AXP_DESC_IO(AXP809, LDO_IO0, "ldo_io0", "ips", 700, 3300, 100, + AXP22X_LDO_IO0_V_OUT, 0x1f, AXP20X_GPIO0_CTRL, 0x07, + AXP22X_IO_ENABLED, AXP22X_IO_DISABLED), + AXP_DESC_IO(AXP809, LDO_IO1, "ldo_io1", "ips", 700, 3300, 100, + AXP22X_LDO_IO1_V_OUT, 0x1f, AXP20X_GPIO1_CTRL, 0x07, + AXP22X_IO_ENABLED, AXP22X_IO_DISABLED), + AXP_DESC_FIXED(AXP809, RTC_LDO, "rtc_ldo", "ips", 1800), + AXP_DESC_SW(AXP809, SW, "sw", "swin", AXP22X_PWR_OUT_CTRL2, BIT(6)), +}; + static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq) { struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); @@ -239,6 +294,7 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq) break; case AXP221_ID: case AXP223_ID: + case AXP809_ID: min = 1800; max = 4050; def = 3000; @@ -318,6 +374,7 @@ static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 work case AXP221_ID: case AXP223_ID: + case AXP809_ID: if (id < AXP22X_DCDC1 || id > AXP22X_DCDC5) return -EINVAL; @@ -346,8 +403,8 @@ static int axp20x_regulator_probe(struct platform_device *pdev) }; int ret, i, nregulators; u32 workmode; - const char *axp22x_dc1_name = axp22x_regulators[AXP22X_DCDC1].name; - const char *axp22x_dc5_name = axp22x_regulators[AXP22X_DCDC5].name; + const char *dcdc1_name = axp22x_regulators[AXP22X_DCDC1].name; + const char *dcdc5_name = axp22x_regulators[AXP22X_DCDC5].name; switch (axp20x->variant) { case AXP202_ID: @@ -360,6 +417,10 @@ static int axp20x_regulator_probe(struct platform_device *pdev) regulators = axp22x_regulators; nregulators = AXP22X_REG_ID_MAX; break; + case AXP809_ID: + regulators = axp809_regulators; + nregulators = AXP809_REG_ID_MAX; + break; default: dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n", axp20x->variant); @@ -382,22 +443,22 @@ static int axp20x_regulator_probe(struct platform_device *pdev) * part of this loop to see where we save the DT defined * name. */ - if (regulators == axp22x_regulators) { - if (i == AXP22X_DC1SW) { - new_desc = devm_kzalloc(&pdev->dev, - sizeof(*desc), - GFP_KERNEL); - *new_desc = regulators[i]; - new_desc->supply_name = axp22x_dc1_name; - desc = new_desc; - } else if (i == AXP22X_DC5LDO) { - new_desc = devm_kzalloc(&pdev->dev, - sizeof(*desc), - GFP_KERNEL); - *new_desc = regulators[i]; - new_desc->supply_name = axp22x_dc5_name; - desc = new_desc; - } + if ((regulators == axp22x_regulators && i == AXP22X_DC1SW) || + (regulators == axp809_regulators && i == AXP809_DC1SW)) { + new_desc = devm_kzalloc(&pdev->dev, sizeof(*desc), + GFP_KERNEL); + *new_desc = regulators[i]; + new_desc->supply_name = dcdc1_name; + desc = new_desc; + } + + if ((regulators == axp22x_regulators && i == AXP22X_DC5LDO) || + (regulators == axp809_regulators && i == AXP809_DC5LDO)) { + new_desc = devm_kzalloc(&pdev->dev, sizeof(*desc), + GFP_KERNEL); + *new_desc = regulators[i]; + new_desc->supply_name = dcdc5_name; + desc = new_desc; } rdev = devm_regulator_register(&pdev->dev, desc, &config); @@ -420,17 +481,17 @@ static int axp20x_regulator_probe(struct platform_device *pdev) /* * Save AXP22X DCDC1 / DCDC5 regulator names for later. */ - if (regulators == axp22x_regulators) { - /* Can we use rdev->constraints->name instead? */ - if (i == AXP22X_DCDC1) - of_property_read_string(rdev->dev.of_node, - "regulator-name", - &axp22x_dc1_name); - else if (i == AXP22X_DCDC5) - of_property_read_string(rdev->dev.of_node, - "regulator-name", - &axp22x_dc5_name); - } + if ((regulators == axp22x_regulators && i == AXP22X_DCDC1) || + (regulators == axp809_regulators && i == AXP809_DCDC1)) + of_property_read_string(rdev->dev.of_node, + "regulator-name", + &dcdc1_name); + + if ((regulators == axp22x_regulators && i == AXP22X_DCDC5) || + (regulators == axp809_regulators && i == AXP809_DCDC5)) + of_property_read_string(rdev->dev.of_node, + "regulator-name", + &dcdc5_name); } return 0; -- 2.8.0.rc3