From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1161353AbcHEMJf (ORCPT ); Fri, 5 Aug 2016 08:09:35 -0400 Received: from mezzanine.sirena.org.uk ([106.187.55.193]:56822 "EHLO mezzanine.sirena.org.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1161329AbcHEMJc (ORCPT ); Fri, 5 Aug 2016 08:09:32 -0400 From: Mark Brown To: Stephen Boyd Cc: Mark Brown , Mark Brown , linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Andy Gross , Bjorn Andersson In-Reply-To: <20160711215009.4519-2-sboyd@codeaurora.org> Message-Id: Date: Fri, 05 Aug 2016 13:09:24 +0100 X-SA-Exim-Connect-IP: 2a01:348:6:8808:fab::3 X-SA-Exim-Mail-From: broonie@sirena.org.uk Subject: Applied "regulator: qcom_smd: Fix voltage ranges for pm8x41" to the regulator tree X-SA-Exim-Version: 4.2.1 (built Mon, 26 Dec 2011 16:24:06 +0000) X-SA-Exim-Scanned: No (on mezzanine.sirena.org.uk); Unknown failure Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The patch regulator: qcom_smd: Fix voltage ranges for pm8x41 has been applied to the regulator tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >>From 290284776bb281759b11faa287b8abccaf74bfcb Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 11 Jul 2016 14:50:07 -0700 Subject: [PATCH] regulator: qcom_smd: Fix voltage ranges for pm8x41 The voltage ranges listed here are wrong. The correct ranges can be seen in the "native" spmi regulator driver qcom_spmi-regulator.c at pldo_ranges[], ftsmps_ranges[] and boost_ranges[] for the pldo, ftsmps, and boost type regulators. Port these ranges over to the RPM SMD regulator driver so that we list the appropriate set of supported voltages on pldos. Doing this allows us to specify a voltage like 3075000 for l24, whereas before that wasn't a supported voltage. Fixes: da65e367b67e ("regulator: Regulator driver for the Qualcomm RPM") Signed-off-by: Stephen Boyd Reviewed-by: Andy Gross Signed-off-by: Mark Brown --- drivers/regulator/qcom_smd-regulator.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c index 5022fa8d10c6..47cd28e960db 100644 --- a/drivers/regulator/qcom_smd-regulator.c +++ b/drivers/regulator/qcom_smd-regulator.c @@ -221,29 +221,30 @@ static const struct regulator_desc pm8x41_hfsmps = { static const struct regulator_desc pm8841_ftsmps = { .linear_ranges = (struct regulator_linear_range[]) { REGULATOR_LINEAR_RANGE(350000, 0, 184, 5000), - REGULATOR_LINEAR_RANGE(700000, 185, 339, 10000), + REGULATOR_LINEAR_RANGE(1280000, 185, 261, 10000), }, .n_linear_ranges = 2, - .n_voltages = 340, + .n_voltages = 262, .ops = &rpm_smps_ldo_ops, }; static const struct regulator_desc pm8941_boost = { .linear_ranges = (struct regulator_linear_range[]) { - REGULATOR_LINEAR_RANGE(4000000, 0, 15, 100000), + REGULATOR_LINEAR_RANGE(4000000, 0, 30, 50000), }, .n_linear_ranges = 1, - .n_voltages = 16, + .n_voltages = 31, .ops = &rpm_smps_ldo_ops, }; static const struct regulator_desc pm8941_pldo = { .linear_ranges = (struct regulator_linear_range[]) { - REGULATOR_LINEAR_RANGE( 750000, 0, 30, 25000), - REGULATOR_LINEAR_RANGE(1500000, 31, 99, 50000), + REGULATOR_LINEAR_RANGE( 750000, 0, 63, 12500), + REGULATOR_LINEAR_RANGE(1550000, 64, 126, 25000), + REGULATOR_LINEAR_RANGE(3100000, 127, 163, 50000), }, - .n_linear_ranges = 2, - .n_voltages = 100, + .n_linear_ranges = 3, + .n_voltages = 164, .ops = &rpm_smps_ldo_ops, }; -- 2.8.1