From: Mark Brown <broonie@kernel.org>
To: olivier moysan <olivier.moysan@st.com>
Cc: Mark Brown <broonie@kernel.org>,
lgirdwood@gmail.com, broonie@kernel.org, perex@perex.cz,
tiwai@suse.com, mcoquelin.stm32@gmail.com,
alexandre.torgue@st.com, alsa-devel@alsa-project.org,
robh@kernel.org, mark.rutland@arm.com,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
kernel@stlinux.com, linux-kernel@vger.kernel.org,
olivier.moysan@st.com, arnaud.pouliquen@st.com,
benjamin.gaignard@st.com, alsa-devel@alsa-project.org
Subject: Applied "dt-bindings: stm32: add h7 support for sai" to the asoc tree
Date: Fri, 16 Jun 2017 18:49:48 +0100 [thread overview]
Message-ID: <E1dLvNU-0005aJ-6G@debutante> (raw)
In-Reply-To: <1497615384-7407-2-git-send-email-olivier.moysan@st.com>
The patch
dt-bindings: stm32: add h7 support for sai
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From aef86ae38b0579dc147e3b96b1b9523561f79378 Mon Sep 17 00:00:00 2001
From: olivier moysan <olivier.moysan@st.com>
Date: Fri, 16 Jun 2017 14:16:23 +0200
Subject: [PATCH] dt-bindings: stm32: add h7 support for sai
Document device tree bindings for STM32H7 SAI.
Signed-off-by: olivier moysan <olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
.../devicetree/bindings/sound/st,stm32-sai.txt | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
index a0feeed1710e..f1c5ae59e7c9 100644
--- a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
+++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
@@ -6,7 +6,7 @@ The SAI contains two independent audio sub-blocks. Each sub-block has
its own clock generator and I/O lines controller.
Required properties:
- - compatible: Should be "st,stm32f4-sai"
+ - compatible: Should be "st,stm32f4-sai" or "st,stm32h7-sai"
- reg: Base address and size of SAI common register set.
- clocks: Must contain phandle and clock specifier pairs for each entry
in clock-names.
@@ -47,24 +47,24 @@ sound_card {
};
sai1: sai1@40015800 {
- compatible = "st,stm32f4-sai";
+ compatible = "st,stm32h7-sai";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x40015800 0x400>;
reg = <0x40015800 0x4>;
- clocks = <&rcc 1 CLK_SAIQ_PDIV>, <&rcc 1 CLK_I2SQ_PDIV>;
+ clocks = <&rcc PLL1_Q>, <&rcc PLL2_P>;
clock-names = "x8k", "x11k";
interrupts = <87>;
- sai1b: audio-controller@40015824 {
- compatible = "st,stm32-sai-sub-b";
- reg = <0x24 0x1C>;
- clocks = <&rcc 1 CLK_SAI2>;
+ sai1a: audio-controller@40015804 {
+ compatible = "st,stm32-sai-sub-a";
+ reg = <0x4 0x1C>;
+ clocks = <&rcc SAI1_CK>;
clock-names = "sai_ck";
- dmas = <&dma2 5 0 0x400 0x0>;
+ dmas = <&dmamux1 1 87 0x400 0x0>;
dma-names = "tx";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_sai1b>;
+ pinctrl-0 = <&pinctrl_sai1a>;
sai1b_port: port {
cpu_endpoint: endpoint {
--
2.11.0
next prev parent reply other threads:[~2017-06-16 17:51 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-16 12:16 [PATCH 0/2] ASoC: stm32: sai: Add H7 support olivier moysan
2017-06-16 12:16 ` [PATCH 1/2] dt-bindings: stm32: add h7 support for sai olivier moysan
2017-06-16 17:49 ` Mark Brown [this message]
2017-06-16 12:16 ` [PATCH 2/2] ASoC: stm32: sai: add h7 support olivier moysan
2017-06-16 17:49 ` Applied "ASoC: stm32: sai: add h7 support" to the asoc tree Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1dLvNU-0005aJ-6G@debutante \
--to=broonie@kernel.org \
--cc=alexandre.torgue@st.com \
--cc=alsa-devel@alsa-project.org \
--cc=arnaud.pouliquen@st.com \
--cc=benjamin.gaignard@st.com \
--cc=devicetree@vger.kernel.org \
--cc=kernel@stlinux.com \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=olivier.moysan@st.com \
--cc=perex@perex.cz \
--cc=robh@kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).