From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755495AbcIVLL3 convert rfc822-to-8bit (ORCPT ); Thu, 22 Sep 2016 07:11:29 -0400 Received: from lhrrgout.huawei.com ([194.213.3.17]:3490 "EHLO lhrrgout.huawei.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933008AbcIVLLK (ORCPT ); Thu, 22 Sep 2016 07:11:10 -0400 From: Gabriele Paoloni To: Lorenzo Pieralisi , Bjorn Helgaas CC: Ard Biesheuvel , Tomasz Nowicki , David Daney , Will Deacon , Catalin Marinas , "Rafael Wysocki" , Arnd Bergmann , Hanjun Guo , Sinan Kaya , Jayachandran C , Christopher Covington , Duc Dang , Robert Richter , "Marcin Wojtas" , Liviu Dudau , Wangyijing , Mark Salter , "linux-pci@vger.kernel.org" , "linux-arm-kernel@lists.infradead.org" , Linaro ACPI Mailman List , Jon Masters , Andrea Gallo , Jeremy Linton , "liudongdong (C)" , Jeff Hugo , "linux-acpi@vger.kernel.org" , "linux-kernel@vger.kernel.org" , "Rafael J. Wysocki" Subject: RE: [PATCH V6 3/5] PCI: thunder-pem: Allow to probe PEM-specific register range for ACPI case Thread-Topic: [PATCH V6 3/5] PCI: thunder-pem: Allow to probe PEM-specific register range for ACPI case Thread-Index: AQHSCs/bKvgtuUMNE0KZWVrE8/EhzKCBG2cAgADd8ICAAGdogIAAAeSAgAAHAgCAABHqgIAARWEAgAE7L4CAAELQgIABCAWAgAAi/tA= Date: Thu, 22 Sep 2016 11:10:13 +0000 Message-ID: References: <1473449047-10499-4-git-send-email-tn@semihalf.com> <20160919180900.GB13775@localhost> <49f53bfc-4421-a8b0-694c-bce7e61e1c9e@semihalf.com> <20160920133327.GB13855@localhost> <20160920140518.GD13855@localhost> <20160920191744.GA4941@localhost> <20160921140549.GA11968@red-moon> <20160921180457.GB20006@localhost> <20160922094955.GB18637@red-moon> In-Reply-To: <20160922094955.GB18637@red-moon> Accept-Language: en-GB, en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-originating-ip: [10.203.181.151] Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 8BIT MIME-Version: 1.0 X-CFilter-Loop: Reflected X-Mirapoint-Virus-RAPID-Raw: score=unknown(0), refid=str=0001.0A020201.57E3BC27.023E,ss=1,re=0.000,recu=0.000,reip=0.000,cl=1,cld=1,fgs=0, ip=0.0.0.0, so=2013-06-18 04:22:30, dmn=2013-03-21 17:37:32 X-Mirapoint-Loop-Id: c35826bdc3c67f435ddaffe965dc1219 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Lorenzo, Bjorn > -----Original Message----- > From: Lorenzo Pieralisi [mailto:lorenzo.pieralisi@arm.com] > Sent: 22 September 2016 10:50 > To: Bjorn Helgaas > Cc: Ard Biesheuvel; Tomasz Nowicki; David Daney; Will Deacon; Catalin > Marinas; Rafael Wysocki; Arnd Bergmann; Hanjun Guo; Sinan Kaya; > Jayachandran C; Christopher Covington; Duc Dang; Robert Richter; Marcin > Wojtas; Liviu Dudau; Wangyijing; Mark Salter; linux- > pci@vger.kernel.org; linux-arm-kernel@lists.infradead.org; Linaro ACPI > Mailman List; Jon Masters; Andrea Gallo; Jeremy Linton; liudongdong > (C); Gabriele Paoloni; Jeff Hugo; linux-acpi@vger.kernel.org; linux- > kernel@vger.kernel.org; Rafael J. Wysocki > Subject: Re: [PATCH V6 3/5] PCI: thunder-pem: Allow to probe PEM- > specific register range for ACPI case > > On Wed, Sep 21, 2016 at 01:04:57PM -0500, Bjorn Helgaas wrote: > > On Wed, Sep 21, 2016 at 03:05:49PM +0100, Lorenzo Pieralisi wrote: > > > On Tue, Sep 20, 2016 at 02:17:44PM -0500, Bjorn Helgaas wrote: > > > > On Tue, Sep 20, 2016 at 04:09:25PM +0100, Ard Biesheuvel wrote: > > > > > > [...] > > > > > > > > None of these platforms can be fixed entirely in software, and > given > > > > > that we will not be adding quirks for new broken hardware, we > should > > > > > ask ourselves whether having two versions of a quirk, i.e., one > for > > > > > broken hardware + currently shipping firmware, and one for the > same > > > > > broken hardware with fixed firmware is really an improvement > over what > > > > > has been proposed here. > > > > > > > > We're talking about two completely different types of quirks: > > > > > > > > 1) MCFG quirks to use memory-mapped config space that doesn't > quite > > > > conform to the ECAM model in the PCIe spec, and > > > > > > > > 2) Some yet-to-be-determined method to describe address space > > > > consumed by a bridge. > > > > > > > > The first two patches of this series are a nice implementation > for 1). > > > > The third patch (ThunderX-specific) is one possibility for 2), > but I > > > > don't like it because there's no way for generic software like > the > > > > ACPI core to discover these resources. > > > > > > Ok, so basically this means that to implement (2) we need to assign > > > some sort of _HID to these quirky PCI bridges (so that we know what > > > device they represent and we can retrieve their _CRS). I take from > > > this discussion that the goal is to make sure that all non-config > > > resources have to be declared through _CRS device objects, which is > > > fine but that requires a FW update (unless we can fabricate ACPI > > > devices and corresponding _CRS in the kernel whenever we match a > > > given MCFG table signature). > > > > All resources consumed by ACPI devices should be declared through > > _CRS. If you want to fabricate ACPI devices or _CRS via kernel > > quirks, that's fine with me. This could be triggered via MCFG > > signature, DMI info, host bridge _HID, etc. > > I think the PNP quirk approach + PNP0c02 resource put forward by Gab > is enough. Great thanks as we take a final decision I will ask Dogndgong to submit another RFC based on this approach > > > > We discussed this already and I think we should make a decision: > > > > > > http://lists.infradead.org/pipermail/linux-arm-kernel/2016- > March/414722.html > > > > > > > > > I'd like to step back and come up with some understanding of > how > > > > > > non-broken firmware *should* deal with this issue. Then, if > we *do* > > > > > > work around this particular broken firmware in the kernel, it > would be > > > > > > nice to do it in a way that fits in with that understanding. > > > > > > > > > > > > For example, if a companion ACPI device is the preferred > solution, an > > > > > > ACPI quirk could fabricate a device with the required > resources. That > > > > > > would address the problem closer to the source and make it > more likely > > > > > > that the rest of the system will work correctly: /proc/iomem > could > > > > > > make sense, things that look at _CRS generically would work > (e.g, > > > > > > /sys/, an admittedly hypothetical "lsacpi", etc.) > > > > > > > > > > > > Hard-coding stuff in drivers is a point solution that doesn't > provide > > > > > > any guidance for future platforms and makes it likely that > the hack > > > > > > will get copied into even more drivers. > > > > > > > > > > > > > > > > OK, I see. But the guidance for future platforms should be 'do > not > > > > > rely on quirks', and what I am arguing here is that the more we > polish > > > > > up this code and make it clean and reusable, the more likely it > is > > > > > that will end up getting abused by new broken hardware that we > set out > > > > > to reject entirely in the first place. > > > > > > > > > > So of course, if the quirk involves claiming resources, let's > make > > > > > sure that this occurs in the cleanest and most compliant way > possible. > > > > > But any factoring/reuse concerns other than for the current > crop of > > > > > broken hardware should be avoided imo. > > > > > > > > If future hardware is completely ECAM-compliant and we don't need > any > > > > more MCFG quirks, that would be great. > > > > > > Yes. > > > > > > > But we'll still need to describe that memory-mapped config space > > > > somewhere. If that's done with PNP0C02 or similar devices (as is > done > > > > on my x86 laptop), we'd be all set. > > > > > > I am not sure I understand what you mean here. Are you referring > > > to MCFG regions reported as PNP0c02 resources through its _CRS ? > > > > Yes. PCI Firmware Spec r3.0, Table 4-2, note 2 says address ranges > > reported via MCFG or _CBA should be reserved by _CRS of a PNP0C02 > > device. > > Ok, that's agreed. It goes without saying that since you are quoting > the PCI spec, if FW fails to report MCFG regions in a PNP0c02 device > _CRS I will consider that a FW bug. > > > > IIUC PNP0C02 is a reservation mechanism, but it does not help us > > > associate its _CRS to a specific PCI host bridge instance, right ? > > > > Gab proposed a hierarchy that *would* associate a PNP0C02 device with > > a PCI bridge: > > > > Device (PCI1) { > > Name (_HID, "HISI0080") // PCI Express Root Bridge > > Name (_CID, "PNP0A03") // Compatible PCI Root Bridge > > Method (_CRS, 0, Serialized) { // Root complex resources > (windows) } > > Device (RES0) { > > Name (_HID, "HISI0081") // HiSi PCIe RC config base address > > Name (_CID, "PNP0C02") // Motherboard reserved resource > > Name (_CRS, ResourceTemplate () { ... } > > } > > } > > > > That's a possibility. The PCI Firmware Spec suggests putting RES0 at > > the root (under \_SB), but I don't know why. > > > > Putting it at the root means we couldn't generically associate it > with > > a bridge, although I could imagine something like this: > > > > Device (RES1) { > > Name (_HID, "HISI0081") // HiSi PCIe RC config base address > > Name (_CID, "PNP0C02") // Motherboard reserved resource > > Name (_CRS, ResourceTemplate () { ... } > > Method (BRDG) { "PCI1" } // hand-wavy ASL > > } > > Device (PCI1) { > > Name (_HID, "HISI0080") // PCI Express Root Bridge > > Name (_CID, "PNP0A03") // Compatible PCI Root Bridge > > Method (_CRS, 0, Serialized) { // Root complex resources > (windows) } > > } > > > > Where you could search PNP0C02 devices for a cookie that matched the > > host bridge.o > > Ok, I am fine with both and I think we are converging, but the way > to solve this problem has to be uniform for all ARM partners (and > not only ARM). Two points here: > > 1) Adding a device/subdevice allows people to add a _CRS reporting the > non-window bridge resources. Fine. It also allows people to chuck in > there all sorts of _DSD properties to describe their PCI host bridge > as it is done with DT properties (those _DSD can contain eg clocks > etc.), this may be tempting (so that they can reuse the same DT > driver and do not have to update their firmware) but I want to be > clear here: that must not happen. So, a subdevice with a _CRS to > report resources, yes, but it will stop there. > 2) It is unclear to me how to formalize the above. People should not > write FW by reading the PCI mailing list, so these guidelines have > to > be written, somehow. I do not want to standardize quirks, I want > to prevent random ACPI table content, which is different. > Should I report this to the ACPI spec working group ? If we do > not do that everyone will go solve this problem as they deem fit. > Do we really need to formalize this? As we discussed in the Linaro call at the moment we have few vendors that need quirks and we want to avoid promoting/accepting quirks for the future. At the time of the call I think we decided to informally accept a set of quirks for the current platforms and reject any other quirk coming after a certain date/kernel version (this to be decided). I am not sure if there is a way to document/formalize a temporary exception from the rule... Thanks Gab > [...] > > > > For FW that is immutable I really do not see what we can do apart > > > from hardcoding the non-config resources (consumed by a bridge), > > > somehow. > > > > Right. Well, I assume you mean we should hard-code "non-window > > resources consumed directly by a bridge". If firmware in the field > is > > broken, we should work around it, and that may mean hard-coding some > > resources. > > > > My point is that the hard-coding should not be buried in a driver > > where it's invisible to the rest of the kernel. If we hard-code it > in > > a quirk that adds _CRS entries, then the kernel will work just like > it > > would if the firmware had been correct in the first place. The > > resource will appear in /sys/devices/pnp*/*/resources and > /proc/iomem, > > and if we ever used _SRS to assign or move ACPI devices, we would > know > > to avoid the bridge resource. > > We are in complete agreement here. > > Thanks, > Lorenzo