linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "H. Peter Anvin" <hpa@zytor.com>
To: Borislav Petkov <bp@alien8.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: x86@kernel.org, Thomas Gleixner <tglx@linutronix.de>,
	Ingo Molnar <mingo@redhat.com>,
	linux-kernel@vger.kernel.org
Subject: Re: [RESEND PATCH] x86/tools/relocs: add __printf attribute to die()
Date: Fri, 25 Jun 2021 09:19:38 -0700	[thread overview]
Message-ID: <F8B4FDC6-851F-4EC5-A308-BBAB52A75EF3@zytor.com> (raw)
In-Reply-To: <YNXkVBcmBvZL7khv@zn.tnic>

This is a user space build time tool.

You can use PRIu32/64 or cast to unsigned long long; it's not like the performance for this case is going to matter one iota.

On June 25, 2021 7:12:36 AM PDT, Borislav Petkov <bp@alien8.de> wrote:
>On Fri, Jun 25, 2021 at 02:06:59PM +0200, Greg Kroah-Hartman wrote:
>> Casting seems to be the only way to make this "quiet" that I can
>tell.
>> 
>> Unless someone else has a good idea?
>
>Hmm, so in Documentation/core-api/printk-formats.rst we say that for
>printk() with different size types, we should "use a format specifier
>of
>its largest possible type and explicitly cast to it."
>
>And that kinda sounds ok to me because we don't potentially lose
>through
>the casting.
>
>IOW, I guess something like this below.
>
>---
>diff --git a/arch/x86/tools/relocs.c b/arch/x86/tools/relocs.c
>index 04c5a44b9682..42b0f425a2c7 100644
>--- a/arch/x86/tools/relocs.c
>+++ b/arch/x86/tools/relocs.c
>@@ -389,7 +389,7 @@ static void read_ehdr(FILE *fp)
> 		Elf_Shdr shdr;
> 
> 		if (fseek(fp, ehdr.e_shoff, SEEK_SET) < 0)
>-			die("Seek to %d failed: %s\n", ehdr.e_shoff, strerror(errno));
>+			die("Seek to %lu failed: %s\n", (unsigned long)ehdr.e_shoff,
>strerror(errno));
> 
> 		if (fread(&shdr, sizeof(shdr), 1, fp) != 1)
>			die("Cannot read initial ELF section header: %s\n",
>strerror(errno));
>@@ -412,17 +412,17 @@ static void read_shdrs(FILE *fp)
> 
> 	secs = calloc(shnum, sizeof(struct section));
> 	if (!secs) {
>-		die("Unable to allocate %d section headers\n",
>+		die("Unable to allocate %ld section headers\n",
> 		    shnum);
> 	}
> 	if (fseek(fp, ehdr.e_shoff, SEEK_SET) < 0) {
>-		die("Seek to %d failed: %s\n",
>-			ehdr.e_shoff, strerror(errno));
>+		die("Seek to %lu failed: %s\n",
>+		    (unsigned long)ehdr.e_shoff, strerror(errno));
> 	}
> 	for (i = 0; i < shnum; i++) {
> 		struct section *sec = &secs[i];
> 		if (fread(&shdr, sizeof(shdr), 1, fp) != 1)
>-			die("Cannot read ELF section headers %d/%d: %s\n",
>+			die("Cannot read ELF section headers %d/%ld: %s\n",
> 			    i, shnum, strerror(errno));
> 		sec->shdr.sh_name      = elf_word_to_cpu(shdr.sh_name);
> 		sec->shdr.sh_type      = elf_word_to_cpu(shdr.sh_type);
>@@ -450,12 +450,12 @@ static void read_strtabs(FILE *fp)
> 		}
> 		sec->strtab = malloc(sec->shdr.sh_size);
> 		if (!sec->strtab) {
>-			die("malloc of %d bytes for strtab failed\n",
>-				sec->shdr.sh_size);
>+			die("malloc of %lu bytes for strtab failed\n",
>+			    (unsigned long)sec->shdr.sh_size);
> 		}
> 		if (fseek(fp, sec->shdr.sh_offset, SEEK_SET) < 0) {
>-			die("Seek to %d failed: %s\n",
>-				sec->shdr.sh_offset, strerror(errno));
>+			die("Seek to %lu failed: %s\n",
>+			    (unsigned long)sec->shdr.sh_offset, strerror(errno));
> 		}
> 		if (fread(sec->strtab, 1, sec->shdr.sh_size, fp)
> 		    != sec->shdr.sh_size) {
>@@ -475,12 +475,12 @@ static void read_symtabs(FILE *fp)
> 		}
> 		sec->symtab = malloc(sec->shdr.sh_size);
> 		if (!sec->symtab) {
>-			die("malloc of %d bytes for symtab failed\n",
>-				sec->shdr.sh_size);
>+			die("malloc of %lu bytes for symtab failed\n",
>+			    (unsigned long)sec->shdr.sh_size);
> 		}
> 		if (fseek(fp, sec->shdr.sh_offset, SEEK_SET) < 0) {
>-			die("Seek to %d failed: %s\n",
>-				sec->shdr.sh_offset, strerror(errno));
>+			die("Seek to %lu failed: %s\n",
>+			    (unsigned long)sec->shdr.sh_offset, strerror(errno));
> 		}
> 		if (fread(sec->symtab, 1, sec->shdr.sh_size, fp)
> 		    != sec->shdr.sh_size) {
>@@ -508,12 +508,12 @@ static void read_relocs(FILE *fp)
> 		}
> 		sec->reltab = malloc(sec->shdr.sh_size);
> 		if (!sec->reltab) {
>-			die("malloc of %d bytes for relocs failed\n",
>-				sec->shdr.sh_size);
>+			die("malloc of %lu bytes for relocs failed\n",
>+			    (unsigned long)sec->shdr.sh_size);
> 		}
> 		if (fseek(fp, sec->shdr.sh_offset, SEEK_SET) < 0) {
>-			die("Seek to %d failed: %s\n",
>-				sec->shdr.sh_offset, strerror(errno));
>+			die("Seek to %lu failed: %s\n",
>+			    (unsigned long)sec->shdr.sh_offset, strerror(errno));
> 		}
> 		if (fread(sec->reltab, 1, sec->shdr.sh_size, fp)
> 		    != sec->shdr.sh_size) {
>diff --git a/arch/x86/tools/relocs.h b/arch/x86/tools/relocs.h
>index 43c83c0fd22c..4c49c82446eb 100644
>--- a/arch/x86/tools/relocs.h
>+++ b/arch/x86/tools/relocs.h
>@@ -17,6 +17,7 @@
> #include <regex.h>
> #include <tools/le_byteshift.h>
> 
>+__attribute__((__format__(printf, 1, 2)))
> void die(char *fmt, ...) __attribute__((noreturn));
> 
> #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))

-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.

  reply	other threads:[~2021-06-25 16:19 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-24 11:58 [RESEND PATCH] x86/tools/relocs: add __printf attribute to die() Greg Kroah-Hartman
2021-06-24 12:32 ` Borislav Petkov
2021-06-24 14:44   ` Greg Kroah-Hartman
2021-06-25 16:17     ` H. Peter Anvin
2021-06-25 12:06   ` Greg Kroah-Hartman
2021-06-25 14:12     ` Borislav Petkov
2021-06-25 16:19       ` H. Peter Anvin [this message]
2021-06-25 16:53         ` Borislav Petkov
2021-06-25 20:38           ` H. Peter Anvin
2021-06-25 21:07             ` Borislav Petkov
2021-06-27 15:01               ` Greg Kroah-Hartman
2021-06-28 14:25                 ` [PATCH] x86/tools/relocs: Mark die() with the printf function attr format Borislav Petkov
2021-06-28 14:34                   ` Greg Kroah-Hartman
2021-08-23  5:12                   ` [tip: x86/build] " tip-bot2 for Borislav Petkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=F8B4FDC6-851F-4EC5-A308-BBAB52A75EF3@zytor.com \
    --to=hpa@zytor.com \
    --cc=bp@alien8.de \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).