linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: <Wenyou.Yang@microchip.com>
To: <alexandre.belloni@free-electrons.com>, <linux@roeck-us.net>
Cc: <wim@iguana.be>, <Nicolas.Ferre@microchip.com>,
	<linux-watchdog@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Subject: RE: [PATCH 1/4] watchdog: sama5d4: fix WDDIS handling
Date: Tue, 7 Mar 2017 02:05:55 +0000	[thread overview]
Message-ID: <F9F4555C4E01D7469D37975B62D0EFBB4FC50D@CHN-SV-EXMX07.mchp-main.com> (raw)
In-Reply-To: <20170302173114.28508-2-alexandre.belloni@free-electrons.com>



> -----Original Message-----
> From: Alexandre Belloni [mailto:alexandre.belloni@free-electrons.com]
> Sent: 2017年3月3日 1:31
> To: Guenter Roeck <linux@roeck-us.net>
> Cc: Wim Van Sebroeck <wim@iguana.be>; Nicolas Ferre - M43238
> <Nicolas.Ferre@microchip.com>; Wenyou Yang - A41535
> <Wenyou.Yang@microchip.com>; linux-watchdog@vger.kernel.org; linux-arm-
> kernel@lists.infradead.org; linux-kernel@vger.kernel.org; Alexandre Belloni
> <alexandre.belloni@free-electrons.com>
> Subject: [PATCH 1/4] watchdog: sama5d4: fix WDDIS handling
> 
> The datasheet states: "When setting the WDDIS bit, and while it is set, the fields
> WDV and WDD must not be modified."
> 
> Because the whole configuration is already cached inside .mr, wait for the user to
> enable the watchdog to configure it so it is enabled and configured at the same
> time (what the IP is actually expecting).
> 
> When the watchdog is already enabled, it is not an issue to reconfigure it.

Indeed, thanks.
Acked-by: Wenyou.Yang <wenyou.yang@microchip.com>

> 
> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> ---
>  drivers/watchdog/sama5d4_wdt.c | 48 ++++++++++++++++++++++++++----------
> ------
>  1 file changed, 30 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/watchdog/sama5d4_wdt.c b/drivers/watchdog/sama5d4_wdt.c
> index f709962018ac..5cee20caca78 100644
> --- a/drivers/watchdog/sama5d4_wdt.c
> +++ b/drivers/watchdog/sama5d4_wdt.c
> @@ -44,6 +44,8 @@ MODULE_PARM_DESC(nowayout,
>  	"Watchdog cannot be stopped once started (default="
>  	__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> 
> +#define wdt_enabled (!(wdt->mr & AT91_WDT_WDDIS))
> +
>  #define wdt_read(wdt, field) \
>  	readl_relaxed((wdt)->reg_base + (field))
> 
> @@ -89,7 +91,16 @@ static int sama5d4_wdt_set_timeout(struct
> watchdog_device *wdd,
>  	wdt->mr &= ~AT91_WDT_WDD;
>  	wdt->mr |= AT91_WDT_SET_WDV(value);
>  	wdt->mr |= AT91_WDT_SET_WDD(value);
> -	wdt_write(wdt, AT91_WDT_MR, wdt->mr);
> +
> +	/*
> +	 * WDDIS has to be 0 when updating WDD/WDV. The datasheet states:
> When
> +	 * setting the WDDIS bit, and while it is set, the fields WDV and WDD
> +	 * must not be modified.
> +	 * If the watchdog is enabled, then the timeout can be updated. Else,
> +	 * wait that the user enables it.
> +	 */
> +	if (wdt_enabled)
> +		wdt_write(wdt, AT91_WDT_MR, wdt->mr &
> ~AT91_WDT_WDDIS);
> 
>  	wdd->timeout = timeout;
> 
> @@ -145,23 +156,20 @@ static int of_sama5d4_wdt_init(struct device_node *np,
> struct sama5d4_wdt *wdt)
> 
>  static int sama5d4_wdt_init(struct sama5d4_wdt *wdt)  {
> -	struct watchdog_device *wdd = &wdt->wdd;
> -	u32 value = WDT_SEC2TICKS(wdd->timeout);
>  	u32 reg;
> -
>  	/*
> -	 * Because the fields WDV and WDD must not be modified when the
> WDDIS
> -	 * bit is set, so clear the WDDIS bit before writing the WDT_MR.
> +	 * When booting and resuming, the bootloader may have changed the
> +	 * watchdog configuration.
> +	 * If the watchdog is already running, we can safely update it.
> +	 * Else, we have to disable it properly.
>  	 */
> -	reg = wdt_read(wdt, AT91_WDT_MR);
> -	reg &= ~AT91_WDT_WDDIS;
> -	wdt_write(wdt, AT91_WDT_MR, reg);
> -
> -	wdt->mr |= AT91_WDT_SET_WDD(value);
> -	wdt->mr |= AT91_WDT_SET_WDV(value);
> -
> -	wdt_write(wdt, AT91_WDT_MR, wdt->mr);
> -
> +	if (wdt_enabled) {
> +		wdt_write(wdt, AT91_WDT_MR, wdt->mr);
> +	} else {
> +		reg = wdt_read(wdt, AT91_WDT_MR);
> +		if (!(reg & AT91_WDT_WDDIS))
> +			wdt_write(wdt, AT91_WDT_MR, reg |
> AT91_WDT_WDDIS);
> +	}
>  	return 0;
>  }
> 
> @@ -172,6 +180,7 @@ static int sama5d4_wdt_probe(struct platform_device
> *pdev)
>  	struct resource *res;
>  	void __iomem *regs;
>  	u32 irq = 0;
> +	u32 timeout;
>  	int ret;
> 
>  	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL); @@ -
> 221,6 +230,11 @@ static int sama5d4_wdt_probe(struct platform_device *pdev)
>  		return ret;
>  	}
> 
> +	timeout = WDT_SEC2TICKS(wdd->timeout);
> +
> +	wdt->mr |= AT91_WDT_SET_WDD(timeout);
> +	wdt->mr |= AT91_WDT_SET_WDV(timeout);
> +
>  	ret = sama5d4_wdt_init(wdt);
>  	if (ret)
>  		return ret;
> @@ -263,9 +277,7 @@ static int sama5d4_wdt_resume(struct device *dev)  {
>  	struct sama5d4_wdt *wdt = dev_get_drvdata(dev);
> 
> -	wdt_write(wdt, AT91_WDT_MR, wdt->mr & ~AT91_WDT_WDDIS);
> -	if (wdt->mr & AT91_WDT_WDDIS)
> -		wdt_write(wdt, AT91_WDT_MR, wdt->mr);
> +	sama5d4_wdt_init(wdt);
> 
>  	return 0;
>  }
> --
> 2.11.0

Best Regards,
Wenyou Yang

  parent reply	other threads:[~2017-03-07  2:15 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-02 17:31 [PATCH 0/4] watchdog: sama5d4: fix issues Alexandre Belloni
2017-03-02 17:31 ` [PATCH 1/4] watchdog: sama5d4: fix WDDIS handling Alexandre Belloni
2017-03-04 15:04   ` Guenter Roeck
2017-03-07  2:05   ` Wenyou.Yang [this message]
2017-03-02 17:31 ` [PATCH 2/4] watchdog: sama5d4: fix race condition Alexandre Belloni
2017-03-02 17:42   ` Guenter Roeck
2017-03-02 17:54     ` Alexandre Belloni
2017-03-04 15:05   ` Guenter Roeck
2017-03-07  2:06   ` Wenyou.Yang
2017-03-02 17:31 ` [PATCH 3/4] watchodg: sama5d4: simplify probe Alexandre Belloni
2017-03-02 19:29   ` Alexander Dahl
2017-03-03  8:03   ` Thomas Petazzoni
2017-03-03  9:29     ` Alexandre Belloni
2017-03-03 14:14       ` Guenter Roeck
2017-03-04 15:06   ` Guenter Roeck
2017-03-02 17:31 ` [PATCH 4/4] watchdog: sama5d4: Add comment explaining what happens on resume Alexandre Belloni
2017-03-04 15:07   ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=F9F4555C4E01D7469D37975B62D0EFBB4FC50D@CHN-SV-EXMX07.mchp-main.com \
    --to=wenyou.yang@microchip.com \
    --cc=Nicolas.Ferre@microchip.com \
    --cc=alexandre.belloni@free-electrons.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=wim@iguana.be \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).