* Kernel panic
@ 2002-03-05 22:31 Hanno Böck
2002-03-06 1:40 ` Lionel Bouton
0 siblings, 1 reply; 45+ messages in thread
From: Hanno Böck @ 2002-03-05 22:31 UTC (permalink / raw)
To: linux-kernel
I have a PC with an Athlon CPU, which has problems with newer kernel-versions. (see lspci-output below)
If I want to boot current Knoppix or Mandrake 8.2beta3 install cds (both based on kernel 2.4.17), it says:
Kernel panic: VFS: Unable to mount root fs on 03:05
It worked fine with the older mandrake 8.1 with kernel 2.4.8.
Any ideas? How can I help to fix this?
Here is lspci output:
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 730 Host (rev 02)
00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
00:01.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513
00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet (rev 82)
00:01.2 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 07)
00:01.3 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 07)
00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS PCI Audio Accelerator (rev 02)
00:02.0 PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] SiS630 GUI Accelerator+3D (rev 31)
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: Kernel panic
2002-03-05 22:31 Kernel panic Hanno Böck
@ 2002-03-06 1:40 ` Lionel Bouton
2002-03-06 1:50 ` Andre Hedrick
0 siblings, 1 reply; 45+ messages in thread
From: Lionel Bouton @ 2002-03-06 1:40 UTC (permalink / raw)
To: Hanno Böck; +Cc: linux-kernel
On Tue, Mar 05, 2002 at 11:31:41PM +0100, Hanno Böck wrote:
> I have a PC with an Athlon CPU, which has problems with newer kernel-versions. (see lspci-output below)
>
> If I want to boot current Knoppix or Mandrake 8.2beta3 install cds (both based on kernel 2.4.17), it says:
>
> Kernel panic: VFS: Unable to mount root fs on 03:05
>
> It worked fine with the older mandrake 8.1 with kernel 2.4.8.
>
> Any ideas? How can I help to fix this?
>
Try passing ide=nodma during install and following reboot(s) then fetch a patch
at:
http://inet6.dyn.dhs.org/sponsoring/sis5513/index.html
, apply, recompile, install.
SiS730 support should be OK with latest patches.
LB.
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: Kernel panic
2002-03-06 1:40 ` Lionel Bouton
@ 2002-03-06 1:50 ` Andre Hedrick
2002-03-06 2:24 ` [SiS IDE] 530,540,620 5511,5513 testers wanted Lionel Bouton
0 siblings, 1 reply; 45+ messages in thread
From: Andre Hedrick @ 2002-03-06 1:50 UTC (permalink / raw)
To: Lionel Bouton
Cc: Hanno Böck, linux-kernel, Linus Torvalds, Alan Cox, Marcelo Tosatti
Lionel,
Please add your name to the Maintainer List for the SIS5513 chipset code.
As you have the hardware and testing it and answering questions, for what
it is worth imho, you have earn the right to put your name there.
Regards,
Andre Hedrick
Linux Disk Certification Project Linux ATA Development
On Wed, 6 Mar 2002, Lionel Bouton wrote:
> On Tue, Mar 05, 2002 at 11:31:41PM +0100, Hanno Böck wrote:
> > I have a PC with an Athlon CPU, which has problems with newer kernel-versions. (see lspci-output below)
> >
> > If I want to boot current Knoppix or Mandrake 8.2beta3 install cds (both based on kernel 2.4.17), it says:
> >
> > Kernel panic: VFS: Unable to mount root fs on 03:05
> >
> > It worked fine with the older mandrake 8.1 with kernel 2.4.8.
> >
> > Any ideas? How can I help to fix this?
> >
>
> Try passing ide=nodma during install and following reboot(s) then fetch a patch
> at:
> http://inet6.dyn.dhs.org/sponsoring/sis5513/index.html
> , apply, recompile, install.
>
> SiS730 support should be OK with latest patches.
>
> LB.
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
^ permalink raw reply [flat|nested] 45+ messages in thread
* [SiS IDE] 530,540,620 5511,5513 testers wanted
2002-03-06 1:50 ` Andre Hedrick
@ 2002-03-06 2:24 ` Lionel Bouton
0 siblings, 0 replies; 45+ messages in thread
From: Lionel Bouton @ 2002-03-06 2:24 UTC (permalink / raw)
To: Andre Hedrick
Cc: Hanno Böck, linux-kernel, Linus Torvalds, Alan Cox, Marcelo Tosatti
On Tue, Mar 05, 2002 at 05:50:59PM -0800, Andre Hedrick wrote:
>
> Lionel,
>
> Please add your name to the Maintainer List for the SIS5513 chipset code.
> [...]
If no show-stopper bugreport comes in in the following days, I'll submit a
patch (marked sis5513.c v0.13 final) with debug mode deactivated to lkml,
you and Marcelo that will address this.
So lkml SiS chipset owners, please stress the 20020304_1 patch
available at:
http://inet6.dyn.dhs.org/sponsoring/sis5513/index.html
As I lack test reports on some chip generations, if people with a SiS530,
540,620 or SiS5511,5513 chip would take the time to mail me test results
with this patch, that would be perfect.
LB.
^ permalink raw reply [flat|nested] 45+ messages in thread
* Kernel panic
@ 2013-09-17 2:59 zhang xintao
0 siblings, 0 replies; 45+ messages in thread
From: zhang xintao @ 2013-09-17 2:59 UTC (permalink / raw)
To: linux-kernel
2.6.32-279.el6.x86_64 #1 SMP Thu Sep 12 12:59:17 CST 2013 x86_64
x86_64 x86_64 GNU/Linux
==========================
PID: 2621 TASK: ffff881fe10d2aa0 CPU: 14 COMMAND: "qemu-kvm"
#0 [ffff880028307b00] machine_kexec at ffffffff8103281b
#1 [ffff880028307b60] crash_kexec at ffffffff810ba322
#2 [ffff880028307c30] panic at ffffffff814fce74
#3 [ffff880028307cb0] watchdog_overflow_callback at ffffffff810daf7d
#4 [ffff880028307cd0] __perf_event_overflow at ffffffff8110dbbd
#5 [ffff880028307d70] perf_event_overflow at ffffffff8110e174
#6 [ffff880028307d80] intel_pmu_handle_irq at ffffffff8101e976
#7 [ffff880028307e90] perf_event_nmi_handler at ffffffff81501519
#8 [ffff880028307ea0] notifier_call_chain at ffffffff81503065
#9 [ffff880028307ee0] atomic_notifier_call_chain at ffffffff815030ca
#10 [ffff880028307ef0] notify_die at ffffffff81097d6e
#11 [ffff880028307f20] do_nmi at ffffffff81500ce3
#12 [ffff880028307f50] nmi at ffffffff815005f0
[exception RIP: _spin_lock+33]
RIP: ffffffff814ffe61 RSP: ffff8800283033d0 RFLAGS: 00000097
RAX: 0000000000008dbb RBX: 0000000000016680 RCX: 00000000000000c1
RDX: 0000000000008db4 RSI: ffff880028303438 RDI: ffff880028336680
RBP: ffff8800283033d0 R8: 00000000000000c1 R9: 0000000000000005
R10: 0000000000000000 R11: 0000000000000001 R12: ffff880bf2fd0080
R13: ffff880028303438 R14: ffff880028336680 R15: 0000000000000001
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
--- <NMI exception stack> ---
#13 [ffff8800283033d0] _spin_lock at ffffffff814ffe61
#14 [ffff8800283033d8] task_rq_lock at ffffffff8105350d
#15 [ffff880028303408] try_to_wake_up at ffffffff8105bfbc
#16 [ffff880028303478] default_wake_function at ffffffff8105c372
#17 [ffff880028303488] pollwake at ffffffff8118fbd6
#18 [ffff8800283034c8] __wake_up_common at ffffffff8104e189
#19 [ffff880028303518] __wake_up at ffffffff81053268
#20 [ffff880028303558] tun_net_xmit at ffffffffa0156495 [tun]
#21 [ffff880028303588] dev_hard_start_xmit at ffffffff8143ad9c
#22 [ffff8800283035e8] sch_direct_xmit at ffffffff814588ea
#23 [ffff880028303638] __qdisc_run at ffffffff814589bb
#24 [ffff880028303668] dev_queue_xmit at ffffffff8143f4c3
#25 [ffff8800283036b8] br_dev_queue_push_xmit at ffffffffa03796bc [bridge]
#26 [ffff8800283036d8] br_nf_dev_queue_xmit at ffffffffa037f378 [bridge]
#27 [ffff8800283036e8] br_nf_post_routing at ffffffffa037fe10 [bridge]
#28 [ffff880028303738] nf_iterate at ffffffff814662b9
#29 [ffff880028303788] nf_hook_slow at ffffffff81466474
#30 [ffff880028303808] br_forward_finish at ffffffffa0379733 [bridge]
#31 [ffff880028303838] br_nf_forward_finish at ffffffffa037f9b8 [bridge]
#32 [ffff880028303878] br_nf_forward_ip at ffffffffa0380ea8 [bridge]
#33 [ffff8800283038d8] nf_iterate at ffffffff814662b9
#34 [ffff880028303928] nf_hook_slow at ffffffff81466474
#35 [ffff8800283039a8] __br_forward at ffffffffa03797c2 [bridge]
#36 [ffff8800283039d8] deliver_clone at ffffffffa037939e [bridge]
#37 [ffff880028303a08] br_flood at ffffffffa03795b9 [bridge]
#38 [ffff880028303a48] br_flood_forward at ffffffffa0379625 [bridge]
#39 [ffff880028303a58] br_handle_frame_finish at ffffffffa037a7ae [bridge]
#40 [ffff880028303aa8] br_nf_pre_routing_finish at ffffffffa0380318 [bridge]
#41 [ffff880028303b48] br_nf_pre_routing at ffffffffa038088f [bridge]
#42 [ffff880028303b98] nf_iterate at ffffffff814662b9
#43 [ffff880028303be8] nf_hook_slow at ffffffff81466474
#44 [ffff880028303c68] br_handle_frame at ffffffffa037a95c [bridge]
#45 [ffff880028303ca8] __netif_receive_skb at ffffffff8143a509
#46 [ffff880028303d08] netif_receive_skb at ffffffff8143c708
#47 [ffff880028303d48] napi_skb_finish at ffffffff8143c810
#48 [ffff880028303d68] napi_gro_receive at ffffffff8143ed49
#49 [ffff880028303d88] ixgbe_receive_skb at ffffffffa00df9df [ixgbe]
#50 [ffff880028303d98] ixgbe_poll at ffffffffa00e0dda [ixgbe]
#51 [ffff880028303e68] net_rx_action at ffffffff8143ee63
#52 [ffff880028303ec8] __do_softirq at ffffffff81073b81
#53 [ffff880028303f38] call_softirq at ffffffff8100c24c
#54 [ffff880028303f50] do_softirq at ffffffff8100de85
#55 [ffff880028303f70] irq_exit at ffffffff81073965
#56 [ffff880028303f80] do_IRQ at ffffffff81505835
--- <IRQ stack> ---
#57 [ffff881e47ce3a48] ret_from_intr at ffffffff8100ba53
[exception RIP: x86_emulate_insn+9030]
RIP: ffffffffa01c69f6 RSP: ffff881e47ce3af8 RFLAGS: 00000202
RAX: 0000000000000000 RBX: ffff881e47ce3b88 RCX: 0000000000000010
RDX: ffff881c26cbc5c0 RSI: 0000000000000003 RDI: ffff881c26cbc5c0
RBP: ffffffff8100ba4e R8: 0000000000000001 R9: ffffffffa01b3bf0
R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffa01ae2c6
R13: ffff881e47ce3a98 R14: 0000000000000000 R15: ffff881c26cbc5c0
ORIG_RAX: ffffffffffffff86 CS: 0010 SS: 0018
#58 [ffff881e47ce3b90] x86_emulate_instruction at ffffffffa01b47ab [kvm]
#59 [ffff881e47ce3bf0] kvm_mmu_page_fault at ffffffffa01be6d2 [kvm]
#60 [ffff881e47ce3c30] handle_ept_violation at ffffffffa020548a [kvm_intel]
#61 [ffff881e47ce3c70] vmx_handle_exit at ffffffffa0208cc7 [kvm_intel]
#62 [ffff881e47ce3cb0] kvm_arch_vcpu_ioctl_run at ffffffffa01b724c [kvm]
#63 [ffff881e47ce3db0] kvm_vcpu_ioctl at ffffffffa01a0322 [kvm]
#64 [ffff881e47ce3e60] vfs_ioctl at ffffffff8118db82
#65 [ffff881e47ce3ea0] do_vfs_ioctl at ffffffff8118e04a
#66 [ffff881e47ce3f30] sys_ioctl at ffffffff8118e2a1
#67 [ffff881e47ce3f80] system_call_fastpath at ffffffff8100b0f2
RIP: 00007faceea17a87 RSP: 00007faceab8ba90 RFLAGS: 00000206
RAX: 0000000000000010 RBX: ffffffff8100b0f2 RCX: 00007facf232e010
RDX: 0000000000000000 RSI: 000000000000ae80 RDI: 0000000000000010
RBP: 00007facf54b0e40 R8: 0000000020047000 R9: 00007facf2b3f420
R10: 0000000000000000 R11: 0000000000000246 R12: 00007facf2468000
R13: 00007facf54b0f30 R14: 0000000000000000 R15: 00007facf2467000
ORIG_RAX: 0000000000000010 CS: 0033 SS: 002b
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: Kernel panic
2012-12-02 17:51 ` Stefan Beller
@ 2012-12-02 19:13 ` rh
0 siblings, 0 replies; 45+ messages in thread
From: rh @ 2012-12-02 19:13 UTC (permalink / raw)
To: linux-kernel
On Sun, 02 Dec 2012 18:51:11 +0100
Stefan Beller <stefanbeller@googlemail.com> wrote:
> So I tested vanilla v3.6 and v3.5 as well and this panic comes up.
> Hence I guess my .config is screwed or the way I install the
> kernel.
I started having problems with using make oldconfig on my netbook in
3.6.6 or 3.6.7 with similar panics.
I reverted back to an old .config from 3.3.x, I think it was the oldest
one I had around, and is why I chose it. I didn't try anything between
3.3.x and 3.6.{6,7}
I have no way to capture the output from the panic.
I also tried re-creating a new config but that didn't work and was
painful BAR and because it's painful BAR I use make oldconfig. But I
admit it scares me a little to do so because history has shown that
slogging old crap around can bite.
Is the lesson here that at some point make oldconfig is going to
stop working and that's just the way it is?
Is the config discussion appropriate here? Or maybe there's a better
way and I'm just old school. It seems like the config thing is more
painful than it was rather than less painful.
>
> On 12/02/2012 06:30 PM, Stefan Beller wrote:
> > Hello,
> >
> > so I tested v3.7-rc7-163-g3c46f3d and got a kernel panic.
> > Usually I am running Ubuntu on my Dell Latitutde E6520,
> > which usually works fine except some sound issues.
> >
> > I did this:
> >
> > git clone https://github.com/torvalds/linux.git
> > cd linux
> > make deb-pkg
> > cd ..
> > dpkg -i linux-headers-3.7.0-rc7+_3.7.0-rc7+-3_amd64.deb
> > dpkg -i linux-image-3.7.0-rc7+_3.7.0-rc7+-3_amd64.deb
> > dpkg -i linux-libc-dev_3.7.0-rc7+-3_amd64.deb
> >
> > Rebooting yields a panic,
> > see panic stack trace and .config below
> >
> > How would I help further fixing this issue?
> >
> > ---------------------------------
> > the screen reads:
> > ---------------------------------
> > early console in decompress_kernel
> >
> > Decompressing Linux... Parsing ELF... done.
> > Booting the kernel.
> > drivers/rtc/hctosyys.c: unable to open rtc device (rtc0)
> > Kernel panic - not syncing: VFS Unable to mount root fs on
> > unknown-block(0,0) Pid: 1, com: swapper/0 Not tainted 3.7.0-rc7+ #3
> > Call Trace:
> > [<ffffffff8127a2c3>] panic+0x11a/0x2b3
> > [<ffffffff8147d42e>] mount_block_root+0x375/0x39a
> > [<ffffffff8147d4bf>] mount_root+0x6c/0x77
> > [<ffffffff8147d68b>] prepare_namespace+0x1c1/0x203
> > [<ffffffff8106aeb3>] ? release_tgcred.isra.8+0x3c/0x3c
> > [<ffffffff812750b5>] kernel_init+0x2ae/0x433
> > [<ffffffff8147c5f8>] ? loglevel+0x46/0x46
> > [<ffffffff81274e07>] ? rest_init+0xd3/0xd3
> > [<ffffffff812832bc>] ret_from_fork+0x7c/0xb0
> > [<ffffffff81274e07>] ? rest_init+0xd3/0xd3
> >
> > ---------------------------------
> > .config
> > ---------------------------------
> >
> > #
> > # Automatically generated file; DO NOT EDIT.
> > # Linux/x86_64 3.7.0-rc6 Kernel Configuration
> > #
> > CONFIG_64BIT=y
> > CONFIG_X86_64=y
> > CONFIG_X86=y
> > CONFIG_INSTRUCTION_DECODER=y
> > CONFIG_OUTPUT_FORMAT="elf64-x86-64"
> > CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
> > CONFIG_LOCKDEP_SUPPORT=y
> > CONFIG_STACKTRACE_SUPPORT=y
> > CONFIG_HAVE_LATENCYTOP_SUPPORT=y
> > CONFIG_MMU=y
> > CONFIG_NEED_DMA_MAP_STATE=y
> > CONFIG_NEED_SG_DMA_LENGTH=y
> > CONFIG_GENERIC_ISA_DMA=y
> > CONFIG_GENERIC_BUG=y
> > CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
> > CONFIG_GENERIC_HWEIGHT=y
> > CONFIG_ARCH_MAY_HAVE_PC_FDC=y
> > CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> > CONFIG_GENERIC_CALIBRATE_DELAY=y
> > CONFIG_ARCH_HAS_CPU_RELAX=y
> > CONFIG_ARCH_HAS_DEFAULT_IDLE=y
> > CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
> > CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
> > CONFIG_HAVE_SETUP_PER_CPU_AREA=y
> > CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
> > CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
> > CONFIG_ARCH_HIBERNATION_POSSIBLE=y
> > CONFIG_ARCH_SUSPEND_POSSIBLE=y
> > CONFIG_ZONE_DMA32=y
> > CONFIG_AUDIT_ARCH=y
> > CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
> > CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
> > CONFIG_X86_64_SMP=y
> > CONFIG_X86_HT=y
> > CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi
> > -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9
> > -fcall-saved-r10 -fcall-saved-r11" CONFIG_ARCH_SUPPORTS_UPROBES=y
> > CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
> > CONFIG_CONSTRUCTORS=y CONFIG_HAVE_IRQ_WORK=y
> > CONFIG_IRQ_WORK=y
> > CONFIG_BUILDTIME_EXTABLE_SORT=y
> >
> > #
> > # General setup
> > #
> > CONFIG_EXPERIMENTAL=y
> > CONFIG_INIT_ENV_ARG_LIMIT=32
> > CONFIG_CROSS_COMPILE=""
> > CONFIG_LOCALVERSION=""
> > # CONFIG_LOCALVERSION_AUTO is not set
> > CONFIG_HAVE_KERNEL_GZIP=y
> > CONFIG_HAVE_KERNEL_BZIP2=y
> > CONFIG_HAVE_KERNEL_LZMA=y
> > CONFIG_HAVE_KERNEL_XZ=y
> > CONFIG_HAVE_KERNEL_LZO=y
> > # CONFIG_KERNEL_GZIP is not set
> > # CONFIG_KERNEL_BZIP2 is not set
> > CONFIG_KERNEL_LZMA=y
> > # CONFIG_KERNEL_XZ is not set
> > # CONFIG_KERNEL_LZO is not set
> > CONFIG_DEFAULT_HOSTNAME="(none)"
> > CONFIG_SWAP=y
> > CONFIG_SYSVIPC=y
> > CONFIG_SYSVIPC_SYSCTL=y
> > CONFIG_FHANDLE=y
> > CONFIG_HAVE_GENERIC_HARDIRQS=y
> >
> > #
> > # IRQ subsystem
> > #
> > CONFIG_GENERIC_HARDIRQS=y
> > CONFIG_GENERIC_IRQ_PROBE=y
> > CONFIG_GENERIC_IRQ_SHOW=y
> > CONFIG_GENERIC_PENDING_IRQ=y
> > CONFIG_IRQ_DOMAIN=y
> > # CONFIG_IRQ_DOMAIN_DEBUG is not set
> > CONFIG_IRQ_FORCED_THREADING=y
> > CONFIG_SPARSE_IRQ=y
> > CONFIG_CLOCKSOURCE_WATCHDOG=y
> > CONFIG_ARCH_CLOCKSOURCE_DATA=y
> > CONFIG_GENERIC_TIME_VSYSCALL=y
> > CONFIG_GENERIC_CLOCKEVENTS=y
> > CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
> > CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
> > CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
> > CONFIG_GENERIC_CMOS_UPDATE=y
> >
> > #
> > # Timers subsystem
> > #
> > CONFIG_TICK_ONESHOT=y
> > CONFIG_NO_HZ=y
> > CONFIG_HIGH_RES_TIMERS=y
> >
> > #
> > # CPU/Task time and stats accounting
> > #
> > # CONFIG_TICK_CPU_ACCOUNTING is not set
> > CONFIG_IRQ_TIME_ACCOUNTING=y
> > CONFIG_BSD_PROCESS_ACCT=y
> > # CONFIG_BSD_PROCESS_ACCT_V3 is not set
> >
> > #
> > # RCU Subsystem
> > #
> > CONFIG_TREE_PREEMPT_RCU=y
> > CONFIG_PREEMPT_RCU=y
> > # CONFIG_RCU_USER_QS is not set
> > CONFIG_RCU_FANOUT=64
> > CONFIG_RCU_FANOUT_LEAF=16
> > CONFIG_RCU_FANOUT_EXACT=y
> > # CONFIG_RCU_FAST_NO_HZ is not set
> > # CONFIG_TREE_RCU_TRACE is not set
> > CONFIG_RCU_BOOST=y
> > CONFIG_RCU_BOOST_PRIO=1
> > CONFIG_RCU_BOOST_DELAY=500
> > # CONFIG_IKCONFIG is not set
> > CONFIG_LOG_BUF_SHIFT=17
> > CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
> > # CONFIG_CGROUPS is not set
> > # CONFIG_CHECKPOINT_RESTORE is not set
> > CONFIG_NAMESPACES=y
> > # CONFIG_UTS_NS is not set
> > CONFIG_IPC_NS=y
> > CONFIG_PID_NS=y
> > # CONFIG_SCHED_AUTOGROUP is not set
> > CONFIG_SYSFS_DEPRECATED=y
> > CONFIG_SYSFS_DEPRECATED_V2=y
> > # CONFIG_RELAY is not set
> > # CONFIG_BLK_DEV_INITRD is not set
> > CONFIG_CC_OPTIMIZE_FOR_SIZE=y
> > CONFIG_SYSCTL=y
> > CONFIG_ANON_INODES=y
> > # CONFIG_EXPERT is not set
> > # CONFIG_SYSCTL_SYSCALL is not set
> > CONFIG_SYSCTL_EXCEPTION_TRACE=y
> > CONFIG_KALLSYMS=y
> > CONFIG_HOTPLUG=y
> > CONFIG_PRINTK=y
> > CONFIG_BUG=y
> > CONFIG_ELF_CORE=y
> > CONFIG_PCSPKR_PLATFORM=y
> > CONFIG_HAVE_PCSPKR_PLATFORM=y
> > CONFIG_BASE_FULL=y
> > CONFIG_FUTEX=y
> > CONFIG_EPOLL=y
> > CONFIG_SIGNALFD=y
> > CONFIG_TIMERFD=y
> > CONFIG_EVENTFD=y
> > CONFIG_SHMEM=y
> > CONFIG_AIO=y
> > # CONFIG_EMBEDDED is not set
> > CONFIG_HAVE_PERF_EVENTS=y
> >
> > #
> > # Kernel Performance Events And Counters
> > #
> > CONFIG_PERF_EVENTS=y
> > CONFIG_VM_EVENT_COUNTERS=y
> > CONFIG_SLUB_DEBUG=y
> > CONFIG_COMPAT_BRK=y
> > # CONFIG_SLAB is not set
> > CONFIG_SLUB=y
> > CONFIG_PROFILING=y
> > CONFIG_TRACEPOINTS=y
> > CONFIG_OPROFILE=m
> > # CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
> > CONFIG_HAVE_OPROFILE=y
> > CONFIG_OPROFILE_NMI_TIMER=y
> > # CONFIG_KPROBES is not set
> > CONFIG_JUMP_LABEL=y
> > CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
> > CONFIG_HAVE_IOREMAP_PROT=y
> > CONFIG_HAVE_KPROBES=y
> > CONFIG_HAVE_KRETPROBES=y
> > CONFIG_HAVE_OPTPROBES=y
> > CONFIG_HAVE_ARCH_TRACEHOOK=y
> > CONFIG_HAVE_DMA_ATTRS=y
> > CONFIG_USE_GENERIC_SMP_HELPERS=y
> > CONFIG_GENERIC_SMP_IDLE_THREAD=y
> > CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
> > CONFIG_HAVE_DMA_API_DEBUG=y
> > CONFIG_HAVE_HW_BREAKPOINT=y
> > CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
> > CONFIG_HAVE_USER_RETURN_NOTIFIER=y
> > CONFIG_HAVE_PERF_EVENTS_NMI=y
> > CONFIG_HAVE_PERF_REGS=y
> > CONFIG_HAVE_PERF_USER_STACK_DUMP=y
> > CONFIG_HAVE_ARCH_JUMP_LABEL=y
> > CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
> > CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
> > CONFIG_HAVE_CMPXCHG_LOCAL=y
> > CONFIG_HAVE_CMPXCHG_DOUBLE=y
> > CONFIG_GENERIC_KERNEL_THREAD=y
> > CONFIG_GENERIC_KERNEL_EXECVE=y
> > CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
> > CONFIG_HAVE_RCU_USER_QS=y
> > CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
> > CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
> > CONFIG_MODULES_USE_ELF_RELA=y
> >
> > #
> > # GCOV-based kernel profiling
> > #
> > CONFIG_GCOV_KERNEL=y
> > CONFIG_GCOV_PROFILE_ALL=y
> > # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
> > CONFIG_SLABINFO=y
> > CONFIG_RT_MUTEXES=y
> > CONFIG_BASE_SMALL=0
> > CONFIG_MODULES=y
> > CONFIG_MODULE_FORCE_LOAD=y
> > # CONFIG_MODULE_UNLOAD is not set
> > CONFIG_MODVERSIONS=y
> > # CONFIG_MODULE_SRCVERSION_ALL is not set
> > CONFIG_MODULE_SIG=y
> > CONFIG_MODULE_SIG_FORCE=y
> > # CONFIG_MODULE_SIG_SHA1 is not set
> > # CONFIG_MODULE_SIG_SHA224 is not set
> > # CONFIG_MODULE_SIG_SHA256 is not set
> > CONFIG_MODULE_SIG_SHA384=y
> > # CONFIG_MODULE_SIG_SHA512 is not set
> > CONFIG_STOP_MACHINE=y
> > CONFIG_BLOCK=y
> > CONFIG_BLK_DEV_BSG=y
> > # CONFIG_BLK_DEV_BSGLIB is not set
> > # CONFIG_BLK_DEV_INTEGRITY is not set
> >
> > #
> > # Partition Types
> > #
> > # CONFIG_PARTITION_ADVANCED is not set
> > CONFIG_MSDOS_PARTITION=y
> >
> > #
> > # IO Schedulers
> > #
> > CONFIG_IOSCHED_NOOP=y
> > CONFIG_IOSCHED_DEADLINE=m
> > # CONFIG_IOSCHED_CFQ is not set
> > CONFIG_DEFAULT_NOOP=y
> > CONFIG_DEFAULT_IOSCHED="noop"
> > CONFIG_PADATA=y
> > CONFIG_ASN1=y
> > CONFIG_UNINLINE_SPIN_UNLOCK=y
> > CONFIG_MUTEX_SPIN_ON_OWNER=y
> > # CONFIG_FREEZER is not set
> >
> > #
> > # Processor type and features
> > #
> > CONFIG_ZONE_DMA=y
> > CONFIG_SMP=y
> > CONFIG_X86_MPPARSE=y
> > CONFIG_X86_EXTENDED_PLATFORM=y
> > CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
> > # CONFIG_SCHED_OMIT_FRAME_POINTER is not set
> > CONFIG_PARAVIRT_GUEST=y
> > CONFIG_PARAVIRT_TIME_ACCOUNTING=y
> > # CONFIG_XEN is not set
> > # CONFIG_XEN_PRIVILEGED_GUEST is not set
> > CONFIG_KVM_GUEST=y
> > CONFIG_PARAVIRT=y
> > # CONFIG_PARAVIRT_SPINLOCKS is not set
> > CONFIG_PARAVIRT_CLOCK=y
> > CONFIG_NO_BOOTMEM=y
> > # CONFIG_MEMTEST is not set
> > # CONFIG_MK8 is not set
> > # CONFIG_MPSC is not set
> > # CONFIG_MCORE2 is not set
> > # CONFIG_MATOM is not set
> > CONFIG_GENERIC_CPU=y
> > CONFIG_X86_INTERNODE_CACHE_SHIFT=6
> > CONFIG_X86_CMPXCHG=y
> > CONFIG_X86_L1_CACHE_SHIFT=6
> > CONFIG_X86_XADD=y
> > CONFIG_X86_WP_WORKS_OK=y
> > CONFIG_X86_TSC=y
> > CONFIG_X86_CMPXCHG64=y
> > CONFIG_X86_CMOV=y
> > CONFIG_X86_MINIMUM_CPU_FAMILY=64
> > CONFIG_X86_DEBUGCTLMSR=y
> > CONFIG_CPU_SUP_INTEL=y
> > CONFIG_CPU_SUP_AMD=y
> > CONFIG_CPU_SUP_CENTAUR=y
> > CONFIG_HPET_TIMER=y
> > CONFIG_HPET_EMULATE_RTC=y
> > CONFIG_DMI=y
> > CONFIG_SWIOTLB=y
> > CONFIG_IOMMU_HELPER=y
> > CONFIG_NR_CPUS=8
> > CONFIG_SCHED_SMT=y
> > CONFIG_SCHED_MC=y
> > # CONFIG_PREEMPT_NONE is not set
> > # CONFIG_PREEMPT_VOLUNTARY is not set
> > CONFIG_PREEMPT=y
> > CONFIG_PREEMPT_COUNT=y
> > CONFIG_X86_LOCAL_APIC=y
> > CONFIG_X86_IO_APIC=y
> > CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
> > CONFIG_X86_MCE=y
> > # CONFIG_X86_MCE_INTEL is not set
> > # CONFIG_X86_MCE_AMD is not set
> > # CONFIG_X86_MCE_INJECT is not set
> > CONFIG_I8K=m
> > # CONFIG_MICROCODE is not set
> > CONFIG_X86_MSR=m
> > CONFIG_X86_CPUID=m
> > CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
> > CONFIG_ARCH_DMA_ADDR_T_64BIT=y
> > CONFIG_DIRECT_GBPAGES=y
> > CONFIG_NUMA=y
> > # CONFIG_NUMA_EMU is not set
> > CONFIG_NODES_SHIFT=6
> > CONFIG_ARCH_SPARSEMEM_ENABLE=y
> > CONFIG_ARCH_SPARSEMEM_DEFAULT=y
> > CONFIG_ARCH_SELECT_MEMORY_MODEL=y
> > CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
> > CONFIG_SELECT_MEMORY_MODEL=y
> > CONFIG_SPARSEMEM_MANUAL=y
> > CONFIG_SPARSEMEM=y
> > CONFIG_NEED_MULTIPLE_NODES=y
> > CONFIG_HAVE_MEMORY_PRESENT=y
> > CONFIG_SPARSEMEM_EXTREME=y
> > CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
> > CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
> > # CONFIG_SPARSEMEM_VMEMMAP is not set
> > CONFIG_HAVE_MEMBLOCK=y
> > CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
> > CONFIG_ARCH_DISCARD_MEMBLOCK=y
> > CONFIG_MEMORY_ISOLATION=y
> > # CONFIG_MEMORY_HOTPLUG is not set
> > CONFIG_PAGEFLAGS_EXTENDED=y
> > CONFIG_SPLIT_PTLOCK_CPUS=4
> > CONFIG_COMPACTION=y
> > CONFIG_MIGRATION=y
> > CONFIG_PHYS_ADDR_T_64BIT=y
> > CONFIG_ZONE_DMA_FLAG=1
> > CONFIG_BOUNCE=y
> > CONFIG_VIRT_TO_BUS=y
> > CONFIG_KSM=y
> > CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
> > CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
> > CONFIG_MEMORY_FAILURE=y
> > CONFIG_TRANSPARENT_HUGEPAGE=y
> > CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
> > # CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
> > CONFIG_CROSS_MEMORY_ATTACH=y
> > # CONFIG_CLEANCACHE is not set
> > # CONFIG_FRONTSWAP is not set
> > # CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
> > CONFIG_X86_RESERVE_LOW=64
> > CONFIG_MTRR=y
> > # CONFIG_MTRR_SANITIZER is not set
> > CONFIG_X86_PAT=y
> > CONFIG_ARCH_USES_PG_UNCACHED=y
> > CONFIG_ARCH_RANDOM=y
> > CONFIG_X86_SMAP=y
> > # CONFIG_SECCOMP is not set
> > # CONFIG_CC_STACKPROTECTOR is not set
> > # CONFIG_HZ_100 is not set
> > # CONFIG_HZ_250 is not set
> > CONFIG_HZ_300=y
> > # CONFIG_HZ_1000 is not set
> > CONFIG_HZ=300
> > CONFIG_SCHED_HRTICK=y
> > # CONFIG_KEXEC is not set
> > CONFIG_CRASH_DUMP=y
> > CONFIG_PHYSICAL_START=0x1000000
> > # CONFIG_RELOCATABLE is not set
> > CONFIG_PHYSICAL_ALIGN=0x1000000
> > # CONFIG_HOTPLUG_CPU is not set
> > CONFIG_CMDLINE_BOOL=y
> > CONFIG_CMDLINE=""
> > # CONFIG_CMDLINE_OVERRIDE is not set
> > CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
> > CONFIG_USE_PERCPU_NUMA_NODE_ID=y
> >
> > #
> > # Power management and ACPI options
> > #
> > # CONFIG_SUSPEND is not set
> > # CONFIG_HIBERNATION is not set
> > # CONFIG_PM_RUNTIME is not set
> > CONFIG_SFI=y
> >
> > #
> > # CPU Frequency scaling
> > #
> > CONFIG_CPU_FREQ=y
> > CONFIG_CPU_FREQ_TABLE=m
> > CONFIG_CPU_FREQ_STAT=m
> > # CONFIG_CPU_FREQ_STAT_DETAILS is not set
> > # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
> > # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
> > # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
> > CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
> > CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
> > CONFIG_CPU_FREQ_GOV_POWERSAVE=m
> > CONFIG_CPU_FREQ_GOV_USERSPACE=m
> > # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
> > CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
> >
> > #
> > # x86 CPU frequency scaling drivers
> > #
> > # CONFIG_X86_P4_CLOCKMOD is not set
> >
> > #
> > # shared options
> > #
> > # CONFIG_X86_SPEEDSTEP_LIB is not set
> > # CONFIG_CPU_IDLE is not set
> > # CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
> >
> > #
> > # Memory power savings
> > #
> > CONFIG_I7300_IDLE_IOAT_CHANNEL=y
> > CONFIG_I7300_IDLE=m
> >
> > #
> > # Bus options (PCI etc.)
> > #
> > # CONFIG_PCI is not set
> > CONFIG_PCI_LABEL=y
> > CONFIG_ISA_DMA_API=y
> > # CONFIG_PCCARD is not set
> >
> > #
> > # Executable file formats / Emulations
> > #
> > CONFIG_BINFMT_ELF=y
> > CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
> > # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
> > # CONFIG_HAVE_AOUT is not set
> > CONFIG_BINFMT_MISC=m
> > CONFIG_COREDUMP=y
> > # CONFIG_IA32_EMULATION is not set
> > CONFIG_HAVE_TEXT_POKE_SMP=y
> > CONFIG_X86_DEV_DMA_OPS=y
> > # CONFIG_NET is not set
> > CONFIG_HAVE_BPF_JIT=y
> >
> > #
> > # Device Drivers
> > #
> >
> > #
> > # Generic Driver Options
> > #
> > CONFIG_UEVENT_HELPER_PATH=""
> > # CONFIG_DEVTMPFS is not set
> > # CONFIG_STANDALONE is not set
> > CONFIG_PREVENT_FIRMWARE_BUILD=y
> > CONFIG_FW_LOADER=y
> > CONFIG_FIRMWARE_IN_KERNEL=y
> > CONFIG_EXTRA_FIRMWARE=""
> > # CONFIG_SYS_HYPERVISOR is not set
> > # CONFIG_GENERIC_CPU_DEVICES is not set
> > CONFIG_REGMAP=y
> > CONFIG_REGMAP_I2C=m
> > CONFIG_REGMAP_SPI=y
> > CONFIG_REGMAP_IRQ=y
> > CONFIG_DMA_SHARED_BUFFER=y
> >
> > #
> > # Bus devices
> > #
> > CONFIG_OMAP_OCP2SCP=m
> > CONFIG_MTD=m
> > CONFIG_MTD_TESTS=m
> > CONFIG_MTD_REDBOOT_PARTS=m
> > CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
> > # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
> > CONFIG_MTD_REDBOOT_PARTS_READONLY=y
> > # CONFIG_MTD_AR7_PARTS is not set
> >
> > #
> > # User Modules And Translation Layers
> > #
> > # CONFIG_MTD_CHAR is not set
> > CONFIG_HAVE_MTD_OTP=y
> > CONFIG_MTD_BLKDEVS=m
> > CONFIG_MTD_BLOCK=m
> > CONFIG_MTD_BLOCK_RO=m
> > CONFIG_FTL=m
> > # CONFIG_NFTL is not set
> > # CONFIG_INFTL is not set
> > CONFIG_RFD_FTL=m
> > # CONFIG_SSFDC is not set
> > CONFIG_SM_FTL=m
> > # CONFIG_MTD_OOPS is not set
> > CONFIG_MTD_SWAP=m
> >
> > #
> > # RAM/ROM/Flash chip drivers
> > #
> > CONFIG_MTD_CFI=m
> > CONFIG_MTD_JEDECPROBE=m
> > CONFIG_MTD_GEN_PROBE=m
> > CONFIG_MTD_CFI_ADV_OPTIONS=y
> > CONFIG_MTD_CFI_NOSWAP=y
> > # CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
> > # CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
> > # CONFIG_MTD_CFI_GEOMETRY is not set
> > CONFIG_MTD_MAP_BANK_WIDTH_1=y
> > CONFIG_MTD_MAP_BANK_WIDTH_2=y
> > CONFIG_MTD_MAP_BANK_WIDTH_4=y
> > # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
> > # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
> > # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
> > CONFIG_MTD_CFI_I1=y
> > CONFIG_MTD_CFI_I2=y
> > # CONFIG_MTD_CFI_I4 is not set
> > # CONFIG_MTD_CFI_I8 is not set
> > CONFIG_MTD_OTP=y
> > CONFIG_MTD_CFI_INTELEXT=m
> > CONFIG_MTD_CFI_AMDSTD=m
> > # CONFIG_MTD_CFI_STAA is not set
> > CONFIG_MTD_CFI_UTIL=m
> > CONFIG_MTD_RAM=m
> > # CONFIG_MTD_ROM is not set
> > CONFIG_MTD_ABSENT=m
> >
> > #
> > # Mapping drivers for chip access
> > #
> > CONFIG_MTD_COMPLEX_MAPPINGS=y
> > CONFIG_MTD_PHYSMAP=m
> > CONFIG_MTD_PHYSMAP_COMPAT=y
> > CONFIG_MTD_PHYSMAP_START=0x8000000
> > CONFIG_MTD_PHYSMAP_LEN=0
> > CONFIG_MTD_PHYSMAP_BANKWIDTH=2
> > CONFIG_MTD_SC520CDP=m
> > CONFIG_MTD_NETSC520=m
> > CONFIG_MTD_TS5500=m
> > # CONFIG_MTD_SBC_GXX is not set
> > # CONFIG_MTD_AMD76XROM is not set
> > CONFIG_MTD_ICHXROM=m
> > # CONFIG_MTD_NETtel is not set
> > CONFIG_MTD_L440GX=m
> > CONFIG_MTD_PLATRAM=m
> > # CONFIG_MTD_LATCH_ADDR is not set
> >
> > #
> > # Self-contained MTD device drivers
> > #
> > CONFIG_MTD_DATAFLASH=m
> > CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
> > # CONFIG_MTD_DATAFLASH_OTP is not set
> > CONFIG_MTD_M25P80=m
> > CONFIG_M25PXX_USE_FAST_READ=y
> > CONFIG_MTD_SST25L=m
> > # CONFIG_MTD_SLRAM is not set
> > # CONFIG_MTD_PHRAM is not set
> > # CONFIG_MTD_MTDRAM is not set
> > CONFIG_MTD_BLOCK2MTD=m
> >
> > #
> > # Disk-On-Chip Device Drivers
> > #
> > # CONFIG_MTD_DOCG3 is not set
> > CONFIG_MTD_NAND_ECC=m
> > # CONFIG_MTD_NAND_ECC_SMC is not set
> > # CONFIG_MTD_NAND is not set
> > # CONFIG_MTD_ONENAND is not set
> >
> > #
> > # LPDDR flash memory drivers
> > #
> > # CONFIG_MTD_LPDDR is not set
> > # CONFIG_MTD_UBI is not set
> > # CONFIG_PARPORT is not set
> > # CONFIG_BLK_DEV is not set
> >
> > #
> > # Misc devices
> > #
> > CONFIG_SENSORS_LIS3LV02D=m
> > CONFIG_AD525X_DPOT=m
> > # CONFIG_AD525X_DPOT_I2C is not set
> > # CONFIG_AD525X_DPOT_SPI is not set
> > # CONFIG_ICS932S401 is not set
> > # CONFIG_ENCLOSURE_SERVICES is not set
> > # CONFIG_APDS9802ALS is not set
> > # CONFIG_ISL29003 is not set
> > # CONFIG_ISL29020 is not set
> > # CONFIG_SENSORS_TSL2550 is not set
> > # CONFIG_SENSORS_BH1780 is not set
> > # CONFIG_SENSORS_BH1770 is not set
> > CONFIG_SENSORS_APDS990X=m
> > # CONFIG_HMC6352 is not set
> > # CONFIG_DS1682 is not set
> > CONFIG_TI_DAC7512=m
> > # CONFIG_VMWARE_BALLOON is not set
> > # CONFIG_BMP085_I2C is not set
> > # CONFIG_BMP085_SPI is not set
> > # CONFIG_USB_SWITCH_FSA9480 is not set
> > CONFIG_C2PORT=m
> > # CONFIG_C2PORT_DURAMAR_2150 is not set
> >
> > #
> > # EEPROM support
> > #
> > # CONFIG_EEPROM_AT24 is not set
> > CONFIG_EEPROM_AT25=m
> > CONFIG_EEPROM_LEGACY=m
> > CONFIG_EEPROM_MAX6875=m
> > # CONFIG_EEPROM_93CX6 is not set
> > # CONFIG_EEPROM_93XX46 is not set
> >
> > #
> > # Texas Instruments shared transport line discipline
> > #
> > CONFIG_SENSORS_LIS3_SPI=m
> > # CONFIG_SENSORS_LIS3_I2C is not set
> >
> > #
> > # Altera FPGA firmware download module
> > #
> > CONFIG_ALTERA_STAPL=m
> > CONFIG_HAVE_IDE=y
> > # CONFIG_IDE is not set
> >
> > #
> > # SCSI device support
> > #
> > CONFIG_SCSI_MOD=y
> > # CONFIG_RAID_ATTRS is not set
> > # CONFIG_SCSI is not set
> > # CONFIG_SCSI_DMA is not set
> > # CONFIG_SCSI_NETLINK is not set
> > # CONFIG_ATA is not set
> > # CONFIG_MD is not set
> > CONFIG_MACINTOSH_DRIVERS=y
> > # CONFIG_MAC_EMUMOUSEBTN is not set
> >
> > #
> > # Input device support
> > #
> > CONFIG_INPUT=y
> > # CONFIG_INPUT_FF_MEMLESS is not set
> > CONFIG_INPUT_POLLDEV=m
> > CONFIG_INPUT_SPARSEKMAP=m
> > CONFIG_INPUT_MATRIXKMAP=m
> >
> > #
> > # Userland interfaces
> > #
> > CONFIG_INPUT_MOUSEDEV=y
> > CONFIG_INPUT_MOUSEDEV_PSAUX=y
> > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> > # CONFIG_INPUT_JOYDEV is not set
> > # CONFIG_INPUT_EVDEV is not set
> > # CONFIG_INPUT_EVBUG is not set
> >
> > #
> > # Input Device Drivers
> > #
> > CONFIG_INPUT_KEYBOARD=y
> > CONFIG_KEYBOARD_ADP5588=m
> > # CONFIG_KEYBOARD_ADP5589 is not set
> > CONFIG_KEYBOARD_ATKBD=y
> > # CONFIG_KEYBOARD_QT1070 is not set
> > # CONFIG_KEYBOARD_QT2160 is not set
> > # CONFIG_KEYBOARD_LKKBD is not set
> > # CONFIG_KEYBOARD_TCA6416 is not set
> > # CONFIG_KEYBOARD_TCA8418 is not set
> > CONFIG_KEYBOARD_LM8323=m
> > CONFIG_KEYBOARD_LM8333=m
> > CONFIG_KEYBOARD_MAX7359=m
> > # CONFIG_KEYBOARD_MCS is not set
> > # CONFIG_KEYBOARD_MPR121 is not set
> > # CONFIG_KEYBOARD_NEWTON is not set
> > # CONFIG_KEYBOARD_OPENCORES is not set
> > # CONFIG_KEYBOARD_STOWAWAY is not set
> > CONFIG_KEYBOARD_SUNKBD=m
> > CONFIG_KEYBOARD_STMPE=m
> > CONFIG_KEYBOARD_OMAP4=m
> > # CONFIG_KEYBOARD_XTKBD is not set
> > # CONFIG_INPUT_MOUSE is not set
> > CONFIG_INPUT_JOYSTICK=y
> > # CONFIG_JOYSTICK_ANALOG is not set
> > CONFIG_JOYSTICK_A3D=m
> > CONFIG_JOYSTICK_ADI=m
> > # CONFIG_JOYSTICK_COBRA is not set
> > # CONFIG_JOYSTICK_GF2K is not set
> > CONFIG_JOYSTICK_GRIP=m
> > # CONFIG_JOYSTICK_GRIP_MP is not set
> > CONFIG_JOYSTICK_GUILLEMOT=m
> > # CONFIG_JOYSTICK_INTERACT is not set
> > # CONFIG_JOYSTICK_SIDEWINDER is not set
> > # CONFIG_JOYSTICK_TMDC is not set
> > # CONFIG_JOYSTICK_IFORCE is not set
> > CONFIG_JOYSTICK_WARRIOR=m
> > CONFIG_JOYSTICK_MAGELLAN=m
> > CONFIG_JOYSTICK_SPACEORB=m
> > CONFIG_JOYSTICK_SPACEBALL=m
> > # CONFIG_JOYSTICK_STINGER is not set
> > CONFIG_JOYSTICK_TWIDJOY=m
> > CONFIG_JOYSTICK_ZHENHUA=m
> > # CONFIG_JOYSTICK_AS5011 is not set
> > # CONFIG_JOYSTICK_JOYDUMP is not set
> > CONFIG_INPUT_TABLET=y
> > # CONFIG_INPUT_TOUCHSCREEN is not set
> > # CONFIG_INPUT_MISC is not set
> >
> > #
> > # Hardware I/O ports
> > #
> > CONFIG_SERIO=y
> > CONFIG_SERIO_I8042=y
> > CONFIG_SERIO_SERPORT=m
> > CONFIG_SERIO_CT82C710=m
> > CONFIG_SERIO_LIBPS2=y
> > CONFIG_SERIO_RAW=m
> > # CONFIG_SERIO_ALTERA_PS2 is not set
> > CONFIG_SERIO_PS2MULT=m
> > CONFIG_GAMEPORT=m
> > CONFIG_GAMEPORT_NS558=m
> > # CONFIG_GAMEPORT_L4 is not set
> >
> > #
> > # Character devices
> > #
> > CONFIG_VT=y
> > CONFIG_CONSOLE_TRANSLATIONS=y
> > CONFIG_VT_CONSOLE=y
> > CONFIG_HW_CONSOLE=y
> > # CONFIG_VT_HW_CONSOLE_BINDING is not set
> > CONFIG_UNIX98_PTYS=y
> > CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
> > # CONFIG_LEGACY_PTYS is not set
> > CONFIG_SERIAL_NONSTANDARD=y
> > # CONFIG_N_HDLC is not set
> > CONFIG_TRACE_ROUTER=m
> > CONFIG_TRACE_SINK=m
> > # CONFIG_DEVKMEM is not set
> > # CONFIG_STALDRV is not set
> >
> > #
> > # Serial drivers
> > #
> > CONFIG_SERIAL_8250=m
> > CONFIG_FIX_EARLYCON_MEM=y
> > CONFIG_SERIAL_8250_NR_UARTS=4
> > CONFIG_SERIAL_8250_RUNTIME_UARTS=4
> > CONFIG_SERIAL_8250_EXTENDED=y
> > CONFIG_SERIAL_8250_MANY_PORTS=y
> > CONFIG_SERIAL_8250_SHARE_IRQ=y
> > CONFIG_SERIAL_8250_DETECT_IRQ=y
> > CONFIG_SERIAL_8250_RSA=y
> >
> > #
> > # Non-8250 serial port support
> > #
> > # CONFIG_SERIAL_MAX3100 is not set
> > # CONFIG_SERIAL_MAX310X is not set
> > CONFIG_SERIAL_CORE=m
> > # CONFIG_SERIAL_SCCNXP is not set
> > CONFIG_SERIAL_TIMBERDALE=m
> > CONFIG_SERIAL_ALTERA_JTAGUART=m
> > CONFIG_SERIAL_ALTERA_UART=m
> > CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
> > CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
> > # CONFIG_SERIAL_XILINX_PS_UART is not set
> > CONFIG_HVC_DRIVER=y
> > CONFIG_VIRTIO_CONSOLE=m
> > CONFIG_IPMI_HANDLER=m
> > # CONFIG_IPMI_PANIC_EVENT is not set
> > CONFIG_IPMI_DEVICE_INTERFACE=m
> > CONFIG_IPMI_SI=m
> > # CONFIG_IPMI_WATCHDOG is not set
> > CONFIG_IPMI_POWEROFF=m
> > CONFIG_HW_RANDOM=m
> > # CONFIG_HW_RANDOM_TIMERIOMEM is not set
> > # CONFIG_HW_RANDOM_VIA is not set
> > CONFIG_HW_RANDOM_VIRTIO=m
> > # CONFIG_HW_RANDOM_TPM is not set
> > CONFIG_NVRAM=m
> > CONFIG_R3964=m
> > # CONFIG_MWAVE is not set
> > CONFIG_RAW_DRIVER=m
> > CONFIG_MAX_RAW_DEVS=256
> > # CONFIG_HANGCHECK_TIMER is not set
> > CONFIG_TCG_TPM=m
> > # CONFIG_TCG_TIS is not set
> > CONFIG_TCG_TIS_I2C_INFINEON=m
> > # CONFIG_TCG_NSC is not set
> > # CONFIG_TCG_ATMEL is not set
> > # CONFIG_TELCLOCK is not set
> > CONFIG_I2C=m
> > CONFIG_I2C_BOARDINFO=y
> > CONFIG_I2C_COMPAT=y
> > # CONFIG_I2C_CHARDEV is not set
> > # CONFIG_I2C_MUX is not set
> > CONFIG_I2C_HELPER_AUTO=y
> > CONFIG_I2C_SMBUS=m
> > CONFIG_I2C_ALGOBIT=m
> > CONFIG_I2C_ALGOPCA=m
> >
> > #
> > # I2C Hardware Bus support
> > #
> >
> > #
> > # I2C system bus drivers (mostly embedded / system-on-chip)
> > #
> > CONFIG_I2C_OCORES=m
> > CONFIG_I2C_PCA_PLATFORM=m
> > # CONFIG_I2C_PXA_PCI is not set
> > # CONFIG_I2C_SIMTEC is not set
> > CONFIG_I2C_XILINX=m
> >
> > #
> > # External I2C/SMBus adapter drivers
> > #
> > CONFIG_I2C_PARPORT_LIGHT=m
> > # CONFIG_I2C_TAOS_EVM is not set
> >
> > #
> > # Other I2C/SMBus bus drivers
> > #
> > # CONFIG_I2C_STUB is not set
> > CONFIG_I2C_DEBUG_CORE=y
> > # CONFIG_I2C_DEBUG_ALGO is not set
> > CONFIG_I2C_DEBUG_BUS=y
> > CONFIG_SPI=y
> > CONFIG_SPI_MASTER=y
> >
> > #
> > # SPI Master Controller Drivers
> > #
> > # CONFIG_SPI_ALTERA is not set
> > CONFIG_SPI_BITBANG=m
> > # CONFIG_SPI_PXA2XX_PCI is not set
> > # CONFIG_SPI_SC18IS602 is not set
> > # CONFIG_SPI_XCOMM is not set
> > CONFIG_SPI_XILINX=m
> > CONFIG_SPI_DESIGNWARE=m
> >
> > #
> > # SPI Protocol Masters
> > #
> > # CONFIG_SPI_SPIDEV is not set
> > CONFIG_SPI_TLE62X0=m
> > CONFIG_HSI=m
> > CONFIG_HSI_BOARDINFO=y
> >
> > #
> > # HSI clients
> > #
> > # CONFIG_HSI_CHAR is not set
> >
> > #
> > # PPS support
> > #
> > # CONFIG_PPS is not set
> >
> > #
> > # PPS generators support
> > #
> >
> > #
> > # PTP clock support
> > #
> >
> > #
> > # Enable Device Drivers -> PPS to see the PTP clock options.
> > #
> > CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
> > # CONFIG_GPIOLIB is not set
> > CONFIG_W1=m
> >
> > #
> > # 1-wire Bus Masters
> > #
> > # CONFIG_W1_MASTER_DS2482 is not set
> > CONFIG_W1_MASTER_DS1WM=m
> > CONFIG_HDQ_MASTER_OMAP=m
> >
> > #
> > # 1-wire Slaves
> > #
> > CONFIG_W1_SLAVE_THERM=m
> > # CONFIG_W1_SLAVE_SMEM is not set
> > CONFIG_W1_SLAVE_DS2408=m
> > CONFIG_W1_SLAVE_DS2423=m
> > # CONFIG_W1_SLAVE_DS2431 is not set
> > CONFIG_W1_SLAVE_DS2433=m
> > CONFIG_W1_SLAVE_DS2433_CRC=y
> > # CONFIG_W1_SLAVE_DS2760 is not set
> > CONFIG_W1_SLAVE_DS2780=m
> > # CONFIG_W1_SLAVE_DS2781 is not set
> > CONFIG_W1_SLAVE_DS28E04=m
> > # CONFIG_W1_SLAVE_BQ27000 is not set
> > CONFIG_POWER_SUPPLY=y
> > # CONFIG_POWER_SUPPLY_DEBUG is not set
> > # CONFIG_PDA_POWER is not set
> > # CONFIG_TEST_POWER is not set
> > CONFIG_BATTERY_DS2780=m
> > # CONFIG_BATTERY_DS2781 is not set
> > # CONFIG_BATTERY_DS2782 is not set
> > CONFIG_BATTERY_SBS=m
> > CONFIG_BATTERY_BQ27x00=m
> > # CONFIG_BATTERY_BQ27X00_I2C is not set
> > CONFIG_BATTERY_BQ27X00_PLATFORM=y
> > # CONFIG_BATTERY_DA9052 is not set
> > CONFIG_BATTERY_MAX17040=m
> > CONFIG_BATTERY_MAX17042=m
> > CONFIG_CHARGER_PCF50633=m
> > # CONFIG_CHARGER_MAX8903 is not set
> > # CONFIG_CHARGER_LP8727 is not set
> > CONFIG_CHARGER_MANAGER=y
> > # CONFIG_CHARGER_SMB347 is not set
> > CONFIG_POWER_AVS=y
> > CONFIG_HWMON=m
> > CONFIG_HWMON_VID=m
> > # CONFIG_HWMON_DEBUG_CHIP is not set
> >
> > #
> > # Native drivers
> > #
> > # CONFIG_SENSORS_ABITUGURU is not set
> > CONFIG_SENSORS_ABITUGURU3=m
> > CONFIG_SENSORS_AD7314=m
> > CONFIG_SENSORS_AD7414=m
> > CONFIG_SENSORS_AD7418=m
> > CONFIG_SENSORS_ADCXX=m
> > # CONFIG_SENSORS_ADM1021 is not set
> > CONFIG_SENSORS_ADM1025=m
> > CONFIG_SENSORS_ADM1026=m
> > CONFIG_SENSORS_ADM1029=m
> > # CONFIG_SENSORS_ADM1031 is not set
> > CONFIG_SENSORS_ADM9240=m
> > CONFIG_SENSORS_ADT7410=m
> > # CONFIG_SENSORS_ADT7411 is not set
> > CONFIG_SENSORS_ADT7462=m
> > # CONFIG_SENSORS_ADT7470 is not set
> > # CONFIG_SENSORS_ADT7475 is not set
> > # CONFIG_SENSORS_ASC7621 is not set
> > # CONFIG_SENSORS_ASB100 is not set
> > CONFIG_SENSORS_ATXP1=m
> > CONFIG_SENSORS_DS620=m
> > # CONFIG_SENSORS_DS1621 is not set
> > CONFIG_SENSORS_DA9052_ADC=m
> > # CONFIG_SENSORS_F71805F is not set
> > # CONFIG_SENSORS_F71882FG is not set
> > CONFIG_SENSORS_F75375S=m
> > CONFIG_SENSORS_FSCHMD=m
> > CONFIG_SENSORS_G760A=m
> > CONFIG_SENSORS_GL518SM=m
> > # CONFIG_SENSORS_GL520SM is not set
> > CONFIG_SENSORS_HIH6130=m
> > CONFIG_SENSORS_IBMAEM=m
> > # CONFIG_SENSORS_IBMPEX is not set
> > # CONFIG_SENSORS_IT87 is not set
> > CONFIG_SENSORS_JC42=m
> > CONFIG_SENSORS_LINEAGE=m
> > CONFIG_SENSORS_LM63=m
> > # CONFIG_SENSORS_LM70 is not set
> > CONFIG_SENSORS_LM73=m
> > CONFIG_SENSORS_LM75=m
> > # CONFIG_SENSORS_LM77 is not set
> > CONFIG_SENSORS_LM78=m
> > # CONFIG_SENSORS_LM80 is not set
> > CONFIG_SENSORS_LM83=m
> > CONFIG_SENSORS_LM85=m
> > CONFIG_SENSORS_LM87=m
> > CONFIG_SENSORS_LM90=m
> > # CONFIG_SENSORS_LM92 is not set
> > CONFIG_SENSORS_LM93=m
> > # CONFIG_SENSORS_LTC4151 is not set
> > CONFIG_SENSORS_LTC4215=m
> > CONFIG_SENSORS_LTC4245=m
> > CONFIG_SENSORS_LTC4261=m
> > # CONFIG_SENSORS_LM95241 is not set
> > CONFIG_SENSORS_LM95245=m
> > # CONFIG_SENSORS_MAX1111 is not set
> > # CONFIG_SENSORS_MAX16065 is not set
> > # CONFIG_SENSORS_MAX1619 is not set
> > # CONFIG_SENSORS_MAX1668 is not set
> > # CONFIG_SENSORS_MAX197 is not set
> > CONFIG_SENSORS_MAX6639=m
> > # CONFIG_SENSORS_MAX6642 is not set
> > CONFIG_SENSORS_MAX6650=m
> > CONFIG_SENSORS_MCP3021=m
> > # CONFIG_SENSORS_NTC_THERMISTOR is not set
> > CONFIG_SENSORS_PC87360=m
> > # CONFIG_SENSORS_PC87427 is not set
> > # CONFIG_SENSORS_PCF8591 is not set
> > # CONFIG_PMBUS is not set
> > CONFIG_SENSORS_SHT21=m
> > # CONFIG_SENSORS_SMM665 is not set
> > CONFIG_SENSORS_DME1737=m
> > CONFIG_SENSORS_EMC1403=m
> > CONFIG_SENSORS_EMC2103=m
> > CONFIG_SENSORS_EMC6W201=m
> > CONFIG_SENSORS_SMSC47M1=m
> > # CONFIG_SENSORS_SMSC47M192 is not set
> > CONFIG_SENSORS_SMSC47B397=m
> > # CONFIG_SENSORS_SCH56XX_COMMON is not set
> > # CONFIG_SENSORS_SCH5627 is not set
> > # CONFIG_SENSORS_SCH5636 is not set
> > CONFIG_SENSORS_ADS1015=m
> > # CONFIG_SENSORS_ADS7828 is not set
> > # CONFIG_SENSORS_ADS7871 is not set
> > CONFIG_SENSORS_AMC6821=m
> > # CONFIG_SENSORS_INA2XX is not set
> > # CONFIG_SENSORS_THMC50 is not set
> > # CONFIG_SENSORS_TMP102 is not set
> > # CONFIG_SENSORS_TMP401 is not set
> > # CONFIG_SENSORS_TMP421 is not set
> > CONFIG_SENSORS_VIA_CPUTEMP=m
> > # CONFIG_SENSORS_VT1211 is not set
> > # CONFIG_SENSORS_W83781D is not set
> > CONFIG_SENSORS_W83791D=m
> > # CONFIG_SENSORS_W83792D is not set
> > CONFIG_SENSORS_W83793=m
> > CONFIG_SENSORS_W83795=m
> > # CONFIG_SENSORS_W83795_FANCTRL is not set
> > CONFIG_SENSORS_W83L785TS=m
> > # CONFIG_SENSORS_W83L786NG is not set
> > CONFIG_SENSORS_W83627HF=m
> > CONFIG_SENSORS_W83627EHF=m
> > # CONFIG_SENSORS_APPLESMC is not set
> > # CONFIG_SENSORS_MC13783_ADC is not set
> > CONFIG_THERMAL=m
> > CONFIG_THERMAL_HWMON=y
> > # CONFIG_CPU_THERMAL is not set
> > CONFIG_WATCHDOG=y
> > CONFIG_WATCHDOG_CORE=y
> > # CONFIG_WATCHDOG_NOWAYOUT is not set
> >
> > #
> > # Watchdog Device Drivers
> > #
> > # CONFIG_SOFT_WATCHDOG is not set
> > CONFIG_DA9052_WATCHDOG=m
> > # CONFIG_ACQUIRE_WDT is not set
> > # CONFIG_ADVANTECH_WDT is not set
> > CONFIG_F71808E_WDT=m
> > CONFIG_SC520_WDT=m
> > # CONFIG_SBC_FITPC2_WATCHDOG is not set
> > CONFIG_EUROTECH_WDT=m
> > CONFIG_IB700_WDT=m
> > CONFIG_IBMASR=m
> > CONFIG_WAFER_WDT=m
> > CONFIG_IT8712F_WDT=m
> > # CONFIG_IT87_WDT is not set
> > # CONFIG_SC1200_WDT is not set
> > CONFIG_PC87413_WDT=m
> > CONFIG_60XX_WDT=m
> > # CONFIG_SBC8360_WDT is not set
> > # CONFIG_CPU5_WDT is not set
> > # CONFIG_SMSC_SCH311X_WDT is not set
> > CONFIG_SMSC37B787_WDT=m
> > CONFIG_W83627HF_WDT=m
> > CONFIG_W83697HF_WDT=m
> > # CONFIG_W83697UG_WDT is not set
> > CONFIG_W83877F_WDT=m
> > CONFIG_W83977F_WDT=m
> > CONFIG_MACHZ_WDT=m
> > # CONFIG_SBC_EPX_C3_WATCHDOG is not set
> > CONFIG_SSB_POSSIBLE=y
> >
> > #
> > # Sonics Silicon Backplane
> > #
> > CONFIG_SSB=m
> > CONFIG_SSB_DEBUG=y
> > CONFIG_BCMA_POSSIBLE=y
> >
> > #
> > # Broadcom specific AMBA
> > #
> > CONFIG_BCMA=m
> > CONFIG_BCMA_DRIVER_GMAC_CMN=y
> > # CONFIG_BCMA_DEBUG is not set
> >
> > #
> > # Multifunction device drivers
> > #
> > CONFIG_MFD_CORE=y
> > CONFIG_MFD_SM501=m
> > CONFIG_HTC_PASIC3=m
> > # CONFIG_MFD_LM3533 is not set
> > CONFIG_TPS6105X=m
> > CONFIG_TPS6507X=m
> > CONFIG_MFD_TPS65217=m
> > CONFIG_MFD_STMPE=y
> >
> > #
> > # STMPE Interface Drivers
> > #
> > CONFIG_STMPE_SPI=y
> > # CONFIG_MFD_TMIO is not set
> > CONFIG_PMIC_DA9052=y
> > CONFIG_MFD_DA9052_SPI=y
> > CONFIG_MFD_ARIZONA=y
> > # CONFIG_MFD_ARIZONA_I2C is not set
> > CONFIG_MFD_ARIZONA_SPI=m
> > CONFIG_MFD_WM5102=y
> > # CONFIG_MFD_WM5110 is not set
> > # CONFIG_MFD_WM831X_SPI is not set
> > CONFIG_MFD_PCF50633=m
> > CONFIG_PCF50633_ADC=m
> > CONFIG_PCF50633_GPIO=m
> > CONFIG_MFD_MC13783=m
> > CONFIG_MFD_MC13XXX=m
> > CONFIG_MFD_MC13XXX_SPI=m
> > # CONFIG_MFD_MC13XXX_I2C is not set
> > # CONFIG_ABX500_CORE is not set
> > CONFIG_EZX_PCAP=y
> > CONFIG_MFD_WL1273_CORE=m
> > CONFIG_REGULATOR=y
> > # CONFIG_REGULATOR_DEBUG is not set
> > # CONFIG_REGULATOR_DUMMY is not set
> > CONFIG_REGULATOR_FIXED_VOLTAGE=m
> > # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
> > CONFIG_REGULATOR_USERSPACE_CONSUMER=m
> > CONFIG_REGULATOR_AD5398=m
> > CONFIG_REGULATOR_ARIZONA=m
> > CONFIG_REGULATOR_DA9052=m
> > CONFIG_REGULATOR_FAN53555=m
> > CONFIG_REGULATOR_MC13XXX_CORE=m
> > CONFIG_REGULATOR_MC13783=m
> > # CONFIG_REGULATOR_MC13892 is not set
> > CONFIG_REGULATOR_ISL6271A=m
> > CONFIG_REGULATOR_MAX1586=m
> > # CONFIG_REGULATOR_MAX8649 is not set
> > CONFIG_REGULATOR_MAX8660=m
> > CONFIG_REGULATOR_MAX8952=m
> > # CONFIG_REGULATOR_PCAP is not set
> > CONFIG_REGULATOR_LP3971=m
> > # CONFIG_REGULATOR_LP3972 is not set
> > # CONFIG_REGULATOR_PCF50633 is not set
> > # CONFIG_REGULATOR_TPS6105X is not set
> > CONFIG_REGULATOR_TPS62360=m
> > # CONFIG_REGULATOR_TPS65023 is not set
> > CONFIG_REGULATOR_TPS6507X=m
> > # CONFIG_REGULATOR_TPS65217 is not set
> > # CONFIG_REGULATOR_TPS6524X is not set
> > CONFIG_MEDIA_SUPPORT=m
> >
> > #
> > # Multimedia core support
> > #
> > # CONFIG_MEDIA_CAMERA_SUPPORT is not set
> > CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
> > # CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
> > CONFIG_MEDIA_RADIO_SUPPORT=y
> > # CONFIG_MEDIA_RC_SUPPORT is not set
> > CONFIG_VIDEO_DEV=m
> > CONFIG_VIDEO_V4L2=m
> > CONFIG_VIDEO_ADV_DEBUG=y
> > # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
> >
> > #
> > # Media drivers
> > #
> >
> > #
> > # Supported MMC/SDIO adapters
> > #
> > CONFIG_RADIO_ADAPTERS=y
> > CONFIG_RADIO_SI470X=y
> > CONFIG_I2C_SI470X=m
> > CONFIG_I2C_SI4713=m
> > CONFIG_RADIO_SI4713=m
> > # CONFIG_RADIO_TEA5764 is not set
> > CONFIG_RADIO_SAA7706H=m
> > # CONFIG_RADIO_TEF6862 is not set
> > # CONFIG_RADIO_WL1273 is not set
> >
> > #
> > # Texas Instruments WL128x FM driver (ST based)
> > #
> > # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
> >
> > #
> > # Media ancillary drivers (tuners, sensors, i2c, frontends)
> > #
> >
> > #
> > # Encoders, decoders, sensors and other helper chips
> > #
> >
> > #
> > # Audio decoders, processors and mixers
> > #
> > CONFIG_VIDEO_TVAUDIO=m
> > # CONFIG_VIDEO_TDA7432 is not set
> > # CONFIG_VIDEO_TDA9840 is not set
> > # CONFIG_VIDEO_TEA6415C is not set
> > # CONFIG_VIDEO_TEA6420 is not set
> > # CONFIG_VIDEO_MSP3400 is not set
> > CONFIG_VIDEO_CS5345=m
> > CONFIG_VIDEO_CS53L32A=m
> > CONFIG_VIDEO_TLV320AIC23B=m
> > # CONFIG_VIDEO_WM8775 is not set
> > CONFIG_VIDEO_WM8739=m
> > # CONFIG_VIDEO_VP27SMPX is not set
> >
> > #
> > # RDS decoders
> > #
> > CONFIG_VIDEO_SAA6588=m
> >
> > #
> > # Video decoders
> > #
> > CONFIG_VIDEO_ADV7180=m
> > # CONFIG_VIDEO_ADV7183 is not set
> > # CONFIG_VIDEO_BT819 is not set
> > CONFIG_VIDEO_BT856=m
> > CONFIG_VIDEO_BT866=m
> > CONFIG_VIDEO_KS0127=m
> > # CONFIG_VIDEO_SAA7110 is not set
> > # CONFIG_VIDEO_SAA711X is not set
> > # CONFIG_VIDEO_SAA7191 is not set
> > # CONFIG_VIDEO_TVP514X is not set
> > # CONFIG_VIDEO_TVP5150 is not set
> > CONFIG_VIDEO_TVP7002=m
> > CONFIG_VIDEO_VPX3220=m
> >
> > #
> > # Video and audio decoders
> > #
> > CONFIG_VIDEO_SAA717X=m
> > CONFIG_VIDEO_CX25840=m
> >
> > #
> > # MPEG video encoders
> > #
> > CONFIG_VIDEO_CX2341X=m
> >
> > #
> > # Video encoders
> > #
> > # CONFIG_VIDEO_SAA7127 is not set
> > # CONFIG_VIDEO_SAA7185 is not set
> > CONFIG_VIDEO_ADV7170=m
> > CONFIG_VIDEO_ADV7175=m
> > CONFIG_VIDEO_ADV7343=m
> > CONFIG_VIDEO_ADV7393=m
> > # CONFIG_VIDEO_AK881X is not set
> >
> > #
> > # Camera sensor devices
> > #
> >
> > #
> > # Flash devices
> > #
> >
> > #
> > # Video improvement chips
> > #
> > CONFIG_VIDEO_UPD64031A=m
> > # CONFIG_VIDEO_UPD64083 is not set
> >
> > #
> > # Miscelaneous helper chips
> > #
> > # CONFIG_VIDEO_THS7303 is not set
> > # CONFIG_VIDEO_M52790 is not set
> >
> > #
> > # Sensors used on soc_camera driver
> > #
> > # CONFIG_MEDIA_ATTACH is not set
> > CONFIG_MEDIA_TUNER=m
> >
> > #
> > # Customize TV tuners
> > #
> > # CONFIG_MEDIA_TUNER_SIMPLE is not set
> > # CONFIG_MEDIA_TUNER_TDA8290 is not set
> > CONFIG_MEDIA_TUNER_TDA827X=m
> > CONFIG_MEDIA_TUNER_TDA18271=m
> > CONFIG_MEDIA_TUNER_TDA9887=m
> > CONFIG_MEDIA_TUNER_TEA5761=m
> > CONFIG_MEDIA_TUNER_TEA5767=m
> > CONFIG_MEDIA_TUNER_MT20XX=m
> > CONFIG_MEDIA_TUNER_MT2060=m
> > # CONFIG_MEDIA_TUNER_MT2063 is not set
> > CONFIG_MEDIA_TUNER_MT2266=m
> > CONFIG_MEDIA_TUNER_MT2131=m
> > CONFIG_MEDIA_TUNER_QT1010=m
> > # CONFIG_MEDIA_TUNER_XC2028 is not set
> > CONFIG_MEDIA_TUNER_XC5000=m
> > CONFIG_MEDIA_TUNER_XC4000=m
> > # CONFIG_MEDIA_TUNER_MXL5005S is not set
> > CONFIG_MEDIA_TUNER_MXL5007T=m
> > # CONFIG_MEDIA_TUNER_MC44S803 is not set
> > # CONFIG_MEDIA_TUNER_MAX2165 is not set
> > # CONFIG_MEDIA_TUNER_TDA18218 is not set
> > CONFIG_MEDIA_TUNER_FC0011=m
> > CONFIG_MEDIA_TUNER_FC0012=m
> > CONFIG_MEDIA_TUNER_FC0013=m
> > # CONFIG_MEDIA_TUNER_TDA18212 is not set
> > CONFIG_MEDIA_TUNER_E4000=m
> > # CONFIG_MEDIA_TUNER_FC2580 is not set
> > # CONFIG_MEDIA_TUNER_TUA9001 is not set
> >
> > #
> > # Customise DVB Frontends
> > #
> > # CONFIG_DVB_AU8522_V4L is not set
> > CONFIG_DVB_TUNER_DIB0070=m
> > CONFIG_DVB_TUNER_DIB0090=m
> >
> > #
> > # Tools to develop new frontends
> > #
> > CONFIG_DVB_DUMMY_FE=m
> >
> > #
> > # Graphics support
> > #
> > CONFIG_DRM=m
> > # CONFIG_VGASTATE is not set
> > # CONFIG_VIDEO_OUTPUT_CONTROL is not set
> > # CONFIG_FB is not set
> > # CONFIG_EXYNOS_VIDEO is not set
> > CONFIG_BACKLIGHT_LCD_SUPPORT=y
> > CONFIG_LCD_CLASS_DEVICE=m
> > CONFIG_LCD_LTV350QV=m
> > CONFIG_LCD_ILI9320=m
> > CONFIG_LCD_TDO24M=m
> > CONFIG_LCD_VGG2432A4=m
> > CONFIG_LCD_PLATFORM=m
> > CONFIG_LCD_S6E63M0=m
> > CONFIG_LCD_LD9040=m
> > CONFIG_LCD_AMS369FG06=m
> > CONFIG_BACKLIGHT_CLASS_DEVICE=m
> > CONFIG_BACKLIGHT_GENERIC=m
> > CONFIG_BACKLIGHT_DA9052=m
> > # CONFIG_BACKLIGHT_SAHARA is not set
> > # CONFIG_BACKLIGHT_ADP8860 is not set
> > CONFIG_BACKLIGHT_ADP8870=m
> > # CONFIG_BACKLIGHT_PCF50633 is not set
> > # CONFIG_BACKLIGHT_LM3630 is not set
> > # CONFIG_BACKLIGHT_LM3639 is not set
> > CONFIG_BACKLIGHT_LP855X=m
> > CONFIG_BACKLIGHT_TPS65217=m
> >
> > #
> > # Console display driver support
> > #
> > CONFIG_VGA_CONSOLE=y
> > CONFIG_VGACON_SOFT_SCROLLBACK=y
> > CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
> > CONFIG_DUMMY_CONSOLE=y
> > CONFIG_SOUND=m
> > # CONFIG_SOUND_OSS_CORE is not set
> > # CONFIG_SND is not set
> > # CONFIG_SOUND_PRIME is not set
> >
> > #
> > # HID support
> > #
> > # CONFIG_HID is not set
> > # CONFIG_USB_ARCH_HAS_OHCI is not set
> > # CONFIG_USB_ARCH_HAS_EHCI is not set
> > # CONFIG_USB_ARCH_HAS_XHCI is not set
> > CONFIG_USB_SUPPORT=y
> > # CONFIG_USB_ARCH_HAS_HCD is not set
> > CONFIG_USB_HCD_BCMA=m
> > CONFIG_USB_HCD_SSB=m
> >
> > #
> > # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
> > #
> > # CONFIG_USB_EZUSB_FX2 is not set
> > # CONFIG_OMAP_USB2 is not set
> > # CONFIG_USB_GADGET is not set
> >
> > #
> > # OTG and related infrastructure
> > #
> > # CONFIG_MMC is not set
> > CONFIG_MEMSTICK=m
> > # CONFIG_MEMSTICK_DEBUG is not set
> >
> > #
> > # MemoryStick drivers
> > #
> > CONFIG_MEMSTICK_UNSAFE_RESUME=y
> > # CONFIG_MSPRO_BLOCK is not set
> >
> > #
> > # MemoryStick Host Controller Drivers
> > #
> > CONFIG_NEW_LEDS=y
> > CONFIG_LEDS_CLASS=m
> >
> > #
> > # LED drivers
> > #
> > # CONFIG_LEDS_LM3530 is not set
> > # CONFIG_LEDS_LM3642 is not set
> > CONFIG_LEDS_PCA9532=m
> > CONFIG_LEDS_LP3944=m
> > # CONFIG_LEDS_LP5521 is not set
> > # CONFIG_LEDS_LP5523 is not set
> > CONFIG_LEDS_CLEVO_MAIL=m
> > CONFIG_LEDS_PCA955X=m
> > CONFIG_LEDS_PCA9633=m
> > # CONFIG_LEDS_DA9052 is not set
> > # CONFIG_LEDS_DAC124S085 is not set
> > CONFIG_LEDS_REGULATOR=m
> > CONFIG_LEDS_BD2802=m
> > CONFIG_LEDS_MC13783=m
> > CONFIG_LEDS_TCA6507=m
> > CONFIG_LEDS_LM355x=m
> > CONFIG_LEDS_OT200=m
> > CONFIG_LEDS_BLINKM=m
> > # CONFIG_LEDS_TRIGGERS is not set
> >
> > #
> > # LED Triggers
> > #
> > # CONFIG_ACCESSIBILITY is not set
> > CONFIG_EDAC=y
> >
> > #
> > # Reporting subsystems
> > #
> > # CONFIG_EDAC_LEGACY_SYSFS is not set
> > CONFIG_EDAC_DEBUG=y
> > # CONFIG_EDAC_MM_EDAC is not set
> > CONFIG_RTC_LIB=y
> > CONFIG_RTC_CLASS=y
> > CONFIG_RTC_HCTOSYS=y
> > CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
> > CONFIG_RTC_DEBUG=y
> >
> > #
> > # RTC interfaces
> > #
> > CONFIG_RTC_INTF_SYSFS=y
> > # CONFIG_RTC_INTF_PROC is not set
> > # CONFIG_RTC_INTF_DEV is not set
> > # CONFIG_RTC_DRV_TEST is not set
> >
> > #
> > # I2C RTC drivers
> > #
> > CONFIG_RTC_DRV_DS1307=m
> > CONFIG_RTC_DRV_DS1374=m
> > CONFIG_RTC_DRV_DS1672=m
> > CONFIG_RTC_DRV_DS3232=m
> > # CONFIG_RTC_DRV_MAX6900 is not set
> > CONFIG_RTC_DRV_RS5C372=m
> > # CONFIG_RTC_DRV_ISL1208 is not set
> > # CONFIG_RTC_DRV_ISL12022 is not set
> > CONFIG_RTC_DRV_X1205=m
> > # CONFIG_RTC_DRV_PCF8563 is not set
> > # CONFIG_RTC_DRV_PCF8583 is not set
> > CONFIG_RTC_DRV_M41T80=m
> > CONFIG_RTC_DRV_M41T80_WDT=y
> > # CONFIG_RTC_DRV_BQ32K is not set
> > # CONFIG_RTC_DRV_S35390A is not set
> > CONFIG_RTC_DRV_FM3130=m
> > CONFIG_RTC_DRV_RX8581=m
> > CONFIG_RTC_DRV_RX8025=m
> > # CONFIG_RTC_DRV_EM3027 is not set
> > # CONFIG_RTC_DRV_RV3029C2 is not set
> >
> > #
> > # SPI RTC drivers
> > #
> > CONFIG_RTC_DRV_M41T93=m
> > # CONFIG_RTC_DRV_M41T94 is not set
> > CONFIG_RTC_DRV_DS1305=m
> > CONFIG_RTC_DRV_DS1390=m
> > # CONFIG_RTC_DRV_MAX6902 is not set
> > CONFIG_RTC_DRV_R9701=m
> > # CONFIG_RTC_DRV_RS5C348 is not set
> > CONFIG_RTC_DRV_DS3234=m
> > # CONFIG_RTC_DRV_PCF2123 is not set
> >
> > #
> > # Platform RTC drivers
> > #
> > CONFIG_RTC_DRV_CMOS=m
> > # CONFIG_RTC_DRV_DS1286 is not set
> > # CONFIG_RTC_DRV_DS1511 is not set
> > # CONFIG_RTC_DRV_DS1553 is not set
> > CONFIG_RTC_DRV_DS1742=m
> > CONFIG_RTC_DRV_DA9052=m
> > # CONFIG_RTC_DRV_STK17TA8 is not set
> > # CONFIG_RTC_DRV_M48T86 is not set
> > # CONFIG_RTC_DRV_M48T35 is not set
> > # CONFIG_RTC_DRV_M48T59 is not set
> > CONFIG_RTC_DRV_MSM6242=m
> > CONFIG_RTC_DRV_BQ4802=m
> > CONFIG_RTC_DRV_RP5C01=m
> > # CONFIG_RTC_DRV_V3020 is not set
> > # CONFIG_RTC_DRV_DS2404 is not set
> > CONFIG_RTC_DRV_PCF50633=m
> >
> > #
> > # on-CPU RTC drivers
> > #
> > CONFIG_RTC_DRV_PCAP=m
> > CONFIG_RTC_DRV_MC13XXX=m
> > CONFIG_DMADEVICES=y
> > # CONFIG_DMADEVICES_DEBUG is not set
> >
> > #
> > # DMA Devices
> > #
> > CONFIG_TIMB_DMA=m
> > CONFIG_DMA_ENGINE=y
> >
> > #
> > # DMA Clients
> > #
> > CONFIG_ASYNC_TX_DMA=y
> > CONFIG_DMATEST=m
> > CONFIG_AUXDISPLAY=y
> > CONFIG_UIO=m
> > # CONFIG_UIO_PDRV is not set
> > CONFIG_UIO_PDRV_GENIRQ=m
> > CONFIG_VIRTIO=m
> >
> > #
> > # Virtio drivers
> > #
> > CONFIG_VIRTIO_BALLOON=m
> > CONFIG_VIRTIO_MMIO=m
> > CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
> >
> > #
> > # Microsoft Hyper-V guest support
> > #
> > CONFIG_STAGING=y
> > # CONFIG_ECHO is not set
> > CONFIG_COMEDI=m
> > CONFIG_COMEDI_DEBUG=y
> > CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
> > CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
> > CONFIG_COMEDI_MISC_DRIVERS=y
> > CONFIG_COMEDI_KCOMEDILIB=m
> > # CONFIG_COMEDI_BOND is not set
> > CONFIG_COMEDI_TEST=m
> > CONFIG_COMEDI_PARPORT=m
> > CONFIG_COMEDI_SERIAL2002=m
> > CONFIG_COMEDI_SKEL=m
> > # CONFIG_COMEDI_8255 is not set
> > CONFIG_COMEDI_FC=m
> > # CONFIG_ZSMALLOC is not set
> > # CONFIG_FT1000 is not set
> >
> > #
> > # Speakup console speech
> > #
> > CONFIG_SPEAKUP=m
> > # CONFIG_SPEAKUP_SYNTH_ACNTSA is not set
> > # CONFIG_SPEAKUP_SYNTH_ACNTPC is not set
> > CONFIG_SPEAKUP_SYNTH_APOLLO=m
> > CONFIG_SPEAKUP_SYNTH_AUDPTR=m
> > CONFIG_SPEAKUP_SYNTH_BNS=m
> > # CONFIG_SPEAKUP_SYNTH_DECTLK is not set
> > CONFIG_SPEAKUP_SYNTH_DECEXT=m
> > CONFIG_SPEAKUP_SYNTH_DECPC=m
> > # CONFIG_SPEAKUP_SYNTH_DTLK is not set
> > CONFIG_SPEAKUP_SYNTH_KEYPC=m
> > CONFIG_SPEAKUP_SYNTH_LTLK=m
> > CONFIG_SPEAKUP_SYNTH_SOFT=m
> > CONFIG_SPEAKUP_SYNTH_SPKOUT=m
> > CONFIG_SPEAKUP_SYNTH_TXPRT=m
> > CONFIG_SPEAKUP_SYNTH_DUMMY=m
> > # CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
> > # CONFIG_STAGING_MEDIA is not set
> >
> > #
> > # Android
> > #
> > # CONFIG_ANDROID is not set
> > CONFIG_PHONE=m
> > CONFIG_IPACK_BUS=m
> > # CONFIG_SERIAL_IPOCTAL is not set
> > CONFIG_DGRP=m
> > CONFIG_X86_PLATFORM_DEVICES=y
> > CONFIG_SENSORS_HDAPS=m
> > CONFIG_SAMSUNG_LAPTOP=m
> > CONFIG_SAMSUNG_Q10=m
> >
> > #
> > # Hardware Spinlock drivers
> > #
> > CONFIG_CLKEVT_I8253=y
> > CONFIG_I8253_LOCK=y
> > CONFIG_CLKBLD_I8253=y
> > # CONFIG_IOMMU_SUPPORT is not set
> >
> > #
> > # Remoteproc drivers (EXPERIMENTAL)
> > #
> > # CONFIG_STE_MODEM_RPROC is not set
> >
> > #
> > # Rpmsg drivers (EXPERIMENTAL)
> > #
> > # CONFIG_VIRT_DRIVERS is not set
> > # CONFIG_PM_DEVFREQ is not set
> > CONFIG_EXTCON=y
> >
> > #
> > # Extcon Device Drivers
> > #
> > CONFIG_EXTCON_ARIZONA=m
> > # CONFIG_MEMORY is not set
> > # CONFIG_IIO is not set
> > # CONFIG_PWM is not set
> >
> > #
> > # Firmware Drivers
> > #
> > CONFIG_EDD=m
> > CONFIG_EDD_OFF=y
> > CONFIG_FIRMWARE_MEMMAP=y
> > CONFIG_DELL_RBU=m
> > # CONFIG_DCDBAS is not set
> > # CONFIG_DMIID is not set
> > # CONFIG_DMI_SYSFS is not set
> > # CONFIG_ISCSI_IBFT_FIND is not set
> > # CONFIG_GOOGLE_FIRMWARE is not set
> >
> > #
> > # File systems
> > #
> > CONFIG_DCACHE_WORD_ACCESS=y
> > CONFIG_EXT2_FS=m
> > CONFIG_EXT2_FS_XATTR=y
> > CONFIG_EXT2_FS_POSIX_ACL=y
> > CONFIG_EXT2_FS_SECURITY=y
> > CONFIG_EXT2_FS_XIP=y
> > CONFIG_EXT3_FS=m
> > CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
> > # CONFIG_EXT3_FS_XATTR is not set
> > # CONFIG_EXT4_FS is not set
> > CONFIG_FS_XIP=y
> > CONFIG_JBD=m
> > CONFIG_JBD_DEBUG=y
> > CONFIG_FS_MBCACHE=m
> > # CONFIG_REISERFS_FS is not set
> > CONFIG_JFS_FS=m
> > CONFIG_JFS_POSIX_ACL=y
> > CONFIG_JFS_SECURITY=y
> > # CONFIG_JFS_DEBUG is not set
> > # CONFIG_JFS_STATISTICS is not set
> > CONFIG_XFS_FS=m
> > CONFIG_XFS_QUOTA=y
> > CONFIG_XFS_POSIX_ACL=y
> > CONFIG_XFS_RT=y
> > # CONFIG_XFS_DEBUG is not set
> > # CONFIG_GFS2_FS is not set
> > CONFIG_BTRFS_FS=m
> > # CONFIG_BTRFS_FS_POSIX_ACL is not set
> > # CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
> > CONFIG_NILFS2_FS=m
> > CONFIG_FS_POSIX_ACL=y
> > CONFIG_EXPORTFS=y
> > CONFIG_FILE_LOCKING=y
> > # CONFIG_FSNOTIFY is not set
> > # CONFIG_DNOTIFY is not set
> > # CONFIG_INOTIFY_USER is not set
> > # CONFIG_FANOTIFY is not set
> > CONFIG_QUOTA=y
> > CONFIG_PRINT_QUOTA_WARNING=y
> > # CONFIG_QUOTA_DEBUG is not set
> > CONFIG_QFMT_V1=m
> > # CONFIG_QFMT_V2 is not set
> > CONFIG_QUOTACTL=y
> > # CONFIG_AUTOFS4_FS is not set
> > # CONFIG_FUSE_FS is not set
> >
> > #
> > # Caches
> > #
> > # CONFIG_FSCACHE is not set
> >
> > #
> > # CD-ROM/DVD Filesystems
> > #
> > # CONFIG_ISO9660_FS is not set
> > CONFIG_UDF_FS=m
> > CONFIG_UDF_NLS=y
> >
> > #
> > # DOS/FAT/NT Filesystems
> > #
> > CONFIG_FAT_FS=m
> > # CONFIG_MSDOS_FS is not set
> > CONFIG_VFAT_FS=m
> > CONFIG_FAT_DEFAULT_CODEPAGE=437
> > CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
> > CONFIG_NTFS_FS=m
> > # CONFIG_NTFS_DEBUG is not set
> > CONFIG_NTFS_RW=y
> >
> > #
> > # Pseudo filesystems
> > #
> > CONFIG_PROC_FS=y
> > # CONFIG_PROC_KCORE is not set
> > CONFIG_PROC_VMCORE=y
> > CONFIG_PROC_SYSCTL=y
> > CONFIG_PROC_PAGE_MONITOR=y
> > CONFIG_SYSFS=y
> > CONFIG_TMPFS=y
> > # CONFIG_TMPFS_POSIX_ACL is not set
> > # CONFIG_TMPFS_XATTR is not set
> > # CONFIG_HUGETLBFS is not set
> > # CONFIG_HUGETLB_PAGE is not set
> > CONFIG_CONFIGFS_FS=m
> > CONFIG_MISC_FILESYSTEMS=y
> > CONFIG_ADFS_FS=m
> > # CONFIG_ADFS_FS_RW is not set
> > CONFIG_AFFS_FS=m
> > CONFIG_ECRYPT_FS=m
> > # CONFIG_HFS_FS is not set
> > # CONFIG_HFSPLUS_FS is not set
> > # CONFIG_BEFS_FS is not set
> > CONFIG_BFS_FS=m
> > CONFIG_EFS_FS=m
> > # CONFIG_JFFS2_FS is not set
> > # CONFIG_LOGFS is not set
> > CONFIG_CRAMFS=m
> > CONFIG_SQUASHFS=m
> > CONFIG_SQUASHFS_XATTR=y
> > # CONFIG_SQUASHFS_ZLIB is not set
> > CONFIG_SQUASHFS_LZO=y
> > CONFIG_SQUASHFS_XZ=y
> > CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y
> > # CONFIG_SQUASHFS_EMBEDDED is not set
> > CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
> > # CONFIG_VXFS_FS is not set
> > CONFIG_MINIX_FS=m
> > CONFIG_OMFS_FS=m
> > # CONFIG_HPFS_FS is not set
> > # CONFIG_QNX4FS_FS is not set
> > # CONFIG_QNX6FS_FS is not set
> > # CONFIG_ROMFS_FS is not set
> > # CONFIG_PSTORE is not set
> > # CONFIG_SYSV_FS is not set
> > # CONFIG_UFS_FS is not set
> > CONFIG_NLS=y
> > CONFIG_NLS_DEFAULT="iso8859-1"
> > # CONFIG_NLS_CODEPAGE_437 is not set
> > CONFIG_NLS_CODEPAGE_737=m
> > CONFIG_NLS_CODEPAGE_775=m
> > # CONFIG_NLS_CODEPAGE_850 is not set
> > CONFIG_NLS_CODEPAGE_852=m
> > # CONFIG_NLS_CODEPAGE_855 is not set
> > # CONFIG_NLS_CODEPAGE_857 is not set
> > CONFIG_NLS_CODEPAGE_860=m
> > CONFIG_NLS_CODEPAGE_861=m
> > # CONFIG_NLS_CODEPAGE_862 is not set
> > CONFIG_NLS_CODEPAGE_863=m
> > CONFIG_NLS_CODEPAGE_864=m
> > CONFIG_NLS_CODEPAGE_865=m
> > CONFIG_NLS_CODEPAGE_866=m
> > CONFIG_NLS_CODEPAGE_869=m
> > # CONFIG_NLS_CODEPAGE_936 is not set
> > CONFIG_NLS_CODEPAGE_950=m
> > CONFIG_NLS_CODEPAGE_932=m
> > CONFIG_NLS_CODEPAGE_949=m
> > # CONFIG_NLS_CODEPAGE_874 is not set
> > CONFIG_NLS_ISO8859_8=m
> > # CONFIG_NLS_CODEPAGE_1250 is not set
> > # CONFIG_NLS_CODEPAGE_1251 is not set
> > # CONFIG_NLS_ASCII is not set
> > # CONFIG_NLS_ISO8859_1 is not set
> > # CONFIG_NLS_ISO8859_2 is not set
> > CONFIG_NLS_ISO8859_3=m
> > CONFIG_NLS_ISO8859_4=m
> > CONFIG_NLS_ISO8859_5=m
> > # CONFIG_NLS_ISO8859_6 is not set
> > # CONFIG_NLS_ISO8859_7 is not set
> > # CONFIG_NLS_ISO8859_9 is not set
> > # CONFIG_NLS_ISO8859_13 is not set
> > CONFIG_NLS_ISO8859_14=m
> > # CONFIG_NLS_ISO8859_15 is not set
> > # CONFIG_NLS_KOI8_R is not set
> > CONFIG_NLS_KOI8_U=m
> > # CONFIG_NLS_MAC_ROMAN is not set
> > # CONFIG_NLS_MAC_CELTIC is not set
> > CONFIG_NLS_MAC_CENTEURO=m
> > CONFIG_NLS_MAC_CROATIAN=m
> > CONFIG_NLS_MAC_CYRILLIC=m
> > CONFIG_NLS_MAC_GAELIC=m
> > # CONFIG_NLS_MAC_GREEK is not set
> > # CONFIG_NLS_MAC_ICELAND is not set
> > # CONFIG_NLS_MAC_INUIT is not set
> > # CONFIG_NLS_MAC_ROMANIAN is not set
> > CONFIG_NLS_MAC_TURKISH=m
> > # CONFIG_NLS_UTF8 is not set
> >
> > #
> > # Kernel hacking
> > #
> > CONFIG_TRACE_IRQFLAGS_SUPPORT=y
> > # CONFIG_PRINTK_TIME is not set
> > CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
> > # CONFIG_ENABLE_WARN_DEPRECATED is not set
> > # CONFIG_ENABLE_MUST_CHECK is not set
> > CONFIG_FRAME_WARN=2048
> > CONFIG_MAGIC_SYSRQ=y
> > CONFIG_STRIP_ASM_SYMS=y
> > # CONFIG_UNUSED_SYMBOLS is not set
> > CONFIG_DEBUG_FS=y
> > # CONFIG_HEADERS_CHECK is not set
> > # CONFIG_DEBUG_SECTION_MISMATCH is not set
> > # CONFIG_DEBUG_KERNEL is not set
> > # CONFIG_PANIC_ON_OOPS is not set
> > CONFIG_PANIC_ON_OOPS_VALUE=0
> > # CONFIG_SLUB_DEBUG_ON is not set
> > # CONFIG_SLUB_STATS is not set
> > CONFIG_HAVE_DEBUG_KMEMLEAK=y
> > # CONFIG_SPARSE_RCU_POINTER is not set
> > CONFIG_TRACE_IRQFLAGS=y
> > CONFIG_STACKTRACE=y
> > CONFIG_DEBUG_BUGVERBOSE=y
> > CONFIG_DEBUG_MEMORY_INIT=y
> > CONFIG_ARCH_WANT_FRAME_POINTERS=y
> > CONFIG_FRAME_POINTER=y
> > CONFIG_RCU_CPU_STALL_TIMEOUT=60
> > # CONFIG_RCU_CPU_STALL_VERBOSE is not set
> > # CONFIG_LKDTM is not set
> > CONFIG_USER_STACKTRACE_SUPPORT=y
> > CONFIG_NOP_TRACER=y
> > CONFIG_HAVE_FUNCTION_TRACER=y
> > CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
> > CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
> > CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
> > CONFIG_HAVE_DYNAMIC_FTRACE=y
> > CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
> > CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
> > CONFIG_HAVE_FENTRY=y
> > CONFIG_HAVE_C_RECORDMCOUNT=y
> > CONFIG_TRACER_MAX_TRACE=y
> > CONFIG_TRACE_CLOCK=y
> > CONFIG_RING_BUFFER=y
> > CONFIG_EVENT_TRACING=y
> > CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
> > CONFIG_CONTEXT_SWITCH_TRACER=y
> > CONFIG_RING_BUFFER_ALLOW_SWAP=y
> > CONFIG_TRACING=y
> > CONFIG_GENERIC_TRACER=y
> > CONFIG_TRACING_SUPPORT=y
> > CONFIG_FTRACE=y
> > # CONFIG_FUNCTION_TRACER is not set
> > CONFIG_IRQSOFF_TRACER=y
> > # CONFIG_PREEMPT_TRACER is not set
> > CONFIG_SCHED_TRACER=y
> > CONFIG_FTRACE_SYSCALLS=y
> > CONFIG_BRANCH_PROFILE_NONE=y
> > # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
> > # CONFIG_PROFILE_ALL_BRANCHES is not set
> > # CONFIG_STACK_TRACER is not set
> > # CONFIG_BLK_DEV_IO_TRACE is not set
> > # CONFIG_UPROBE_EVENT is not set
> > # CONFIG_PROBE_EVENTS is not set
> > # CONFIG_FTRACE_STARTUP_TEST is not set
> > CONFIG_RING_BUFFER_BENCHMARK=m
> > # CONFIG_DYNAMIC_DEBUG is not set
> > CONFIG_DMA_API_DEBUG=y
> > CONFIG_ATOMIC64_SELFTEST=y
> > CONFIG_SAMPLES=y
> > # CONFIG_SAMPLE_TRACEPOINTS is not set
> > # CONFIG_SAMPLE_TRACE_EVENTS is not set
> > # CONFIG_SAMPLE_KOBJECT is not set
> > CONFIG_SAMPLE_HW_BREAKPOINT=m
> > # CONFIG_SAMPLE_KFIFO is not set
> > CONFIG_HAVE_ARCH_KGDB=y
> > CONFIG_HAVE_ARCH_KMEMCHECK=y
> > # CONFIG_TEST_KSTRTOX is not set
> > # CONFIG_STRICT_DEVMEM is not set
> > CONFIG_X86_VERBOSE_BOOTUP=y
> > CONFIG_EARLY_PRINTK=y
> > CONFIG_DEBUG_SET_MODULE_RONX=y
> > CONFIG_IOMMU_STRESS=y
> > CONFIG_HAVE_MMIOTRACE_SUPPORT=y
> > CONFIG_IO_DELAY_TYPE_0X80=0
> > CONFIG_IO_DELAY_TYPE_0XED=1
> > CONFIG_IO_DELAY_TYPE_UDELAY=2
> > CONFIG_IO_DELAY_TYPE_NONE=3
> > CONFIG_IO_DELAY_0X80=y
> > # CONFIG_IO_DELAY_0XED is not set
> > # CONFIG_IO_DELAY_UDELAY is not set
> > # CONFIG_IO_DELAY_NONE is not set
> > CONFIG_DEFAULT_IO_DELAY_TYPE=0
> > # CONFIG_OPTIMIZE_INLINING is not set
> >
> > #
> > # Security options
> > #
> > CONFIG_KEYS=y
> > CONFIG_TRUSTED_KEYS=m
> > # CONFIG_ENCRYPTED_KEYS is not set
> > # CONFIG_KEYS_DEBUG_PROC_KEYS is not set
> > CONFIG_SECURITY_DMESG_RESTRICT=y
> > CONFIG_SECURITY=y
> > CONFIG_SECURITYFS=y
> > # CONFIG_SECURITY_NETWORK is not set
> > CONFIG_SECURITY_PATH=y
> > CONFIG_SECURITY_YAMA=y
> > # CONFIG_SECURITY_YAMA_STACKED is not set
> > # CONFIG_IMA is not set
> > CONFIG_DEFAULT_SECURITY_YAMA=y
> > # CONFIG_DEFAULT_SECURITY_DAC is not set
> > CONFIG_DEFAULT_SECURITY="yama"
> > CONFIG_CRYPTO=y
> >
> > #
> > # Crypto core or helper
> > #
> > CONFIG_CRYPTO_ALGAPI=y
> > CONFIG_CRYPTO_ALGAPI2=y
> > CONFIG_CRYPTO_AEAD=m
> > CONFIG_CRYPTO_AEAD2=y
> > CONFIG_CRYPTO_BLKCIPHER=m
> > CONFIG_CRYPTO_BLKCIPHER2=y
> > CONFIG_CRYPTO_HASH=y
> > CONFIG_CRYPTO_HASH2=y
> > CONFIG_CRYPTO_RNG=m
> > CONFIG_CRYPTO_RNG2=y
> > CONFIG_CRYPTO_PCOMP=m
> > CONFIG_CRYPTO_PCOMP2=y
> > CONFIG_CRYPTO_MANAGER=m
> > CONFIG_CRYPTO_MANAGER2=y
> > CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
> > CONFIG_CRYPTO_GF128MUL=m
> > CONFIG_CRYPTO_NULL=m
> > CONFIG_CRYPTO_PCRYPT=m
> > CONFIG_CRYPTO_WORKQUEUE=y
> > CONFIG_CRYPTO_CRYPTD=m
> > CONFIG_CRYPTO_AUTHENC=m
> > # CONFIG_CRYPTO_TEST is not set
> > CONFIG_CRYPTO_ABLK_HELPER_X86=m
> > CONFIG_CRYPTO_GLUE_HELPER_X86=m
> >
> > #
> > # Authenticated Encryption with Associated Data
> > #
> > # CONFIG_CRYPTO_CCM is not set
> > # CONFIG_CRYPTO_GCM is not set
> > CONFIG_CRYPTO_SEQIV=m
> >
> > #
> > # Block modes
> > #
> > CONFIG_CRYPTO_CBC=m
> > CONFIG_CRYPTO_CTR=m
> > CONFIG_CRYPTO_CTS=m
> > CONFIG_CRYPTO_ECB=m
> > CONFIG_CRYPTO_LRW=m
> > # CONFIG_CRYPTO_PCBC is not set
> > CONFIG_CRYPTO_XTS=m
> >
> > #
> > # Hash modes
> > #
> > CONFIG_CRYPTO_HMAC=m
> > CONFIG_CRYPTO_XCBC=m
> > # CONFIG_CRYPTO_VMAC is not set
> >
> > #
> > # Digest
> > #
> > CONFIG_CRYPTO_CRC32C=m
> > # CONFIG_CRYPTO_CRC32C_INTEL is not set
> > # CONFIG_CRYPTO_GHASH is not set
> > # CONFIG_CRYPTO_MD4 is not set
> > CONFIG_CRYPTO_MD5=m
> > # CONFIG_CRYPTO_MICHAEL_MIC is not set
> > # CONFIG_CRYPTO_RMD128 is not set
> > # CONFIG_CRYPTO_RMD160 is not set
> > CONFIG_CRYPTO_RMD256=m
> > # CONFIG_CRYPTO_RMD320 is not set
> > CONFIG_CRYPTO_SHA1=m
> > # CONFIG_CRYPTO_SHA1_SSSE3 is not set
> > CONFIG_CRYPTO_SHA256=m
> > CONFIG_CRYPTO_SHA512=y
> > CONFIG_CRYPTO_TGR192=m
> > # CONFIG_CRYPTO_WP512 is not set
> > CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
> >
> > #
> > # Ciphers
> > #
> > CONFIG_CRYPTO_AES=m
> > CONFIG_CRYPTO_AES_X86_64=m
> > CONFIG_CRYPTO_AES_NI_INTEL=m
> > CONFIG_CRYPTO_ANUBIS=m
> > # CONFIG_CRYPTO_ARC4 is not set
> > # CONFIG_CRYPTO_BLOWFISH is not set
> > CONFIG_CRYPTO_BLOWFISH_COMMON=m
> > CONFIG_CRYPTO_BLOWFISH_X86_64=m
> > CONFIG_CRYPTO_CAMELLIA=m
> > CONFIG_CRYPTO_CAMELLIA_X86_64=m
> > # CONFIG_CRYPTO_CAST5 is not set
> > # CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
> > CONFIG_CRYPTO_CAST6=m
> > CONFIG_CRYPTO_CAST6_AVX_X86_64=m
> > # CONFIG_CRYPTO_DES is not set
> > CONFIG_CRYPTO_FCRYPT=m
> > CONFIG_CRYPTO_KHAZAD=m
> > # CONFIG_CRYPTO_SALSA20 is not set
> > # CONFIG_CRYPTO_SALSA20_X86_64 is not set
> > CONFIG_CRYPTO_SEED=m
> > CONFIG_CRYPTO_SERPENT=m
> > # CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
> > # CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
> > # CONFIG_CRYPTO_TEA is not set
> > # CONFIG_CRYPTO_TWOFISH is not set
> > # CONFIG_CRYPTO_TWOFISH_X86_64 is not set
> > # CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
> > # CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set
> >
> > #
> > # Compression
> > #
> > # CONFIG_CRYPTO_DEFLATE is not set
> > CONFIG_CRYPTO_ZLIB=m
> > CONFIG_CRYPTO_LZO=m
> >
> > #
> > # Random Number Generation
> > #
> > CONFIG_CRYPTO_ANSI_CPRNG=m
> > # CONFIG_CRYPTO_HW is not set
> > CONFIG_ASYMMETRIC_KEY_TYPE=y
> > CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
> > CONFIG_PUBLIC_KEY_ALGO_RSA=y
> > CONFIG_X509_CERTIFICATE_PARSER=y
> > CONFIG_HAVE_KVM=y
> > CONFIG_VIRTUALIZATION=y
> > CONFIG_BINARY_PRINTF=y
> >
> > #
> > # Library routines
> > #
> > CONFIG_BITREVERSE=m
> > CONFIG_GENERIC_STRNCPY_FROM_USER=y
> > CONFIG_GENERIC_STRNLEN_USER=y
> > CONFIG_GENERIC_FIND_FIRST_BIT=y
> > CONFIG_GENERIC_PCI_IOMAP=y
> > CONFIG_GENERIC_IOMAP=y
> > CONFIG_GENERIC_IO=y
> > # CONFIG_CRC_CCITT is not set
> > CONFIG_CRC16=m
> > CONFIG_CRC_T10DIF=m
> > CONFIG_CRC_ITU_T=m
> > CONFIG_CRC32=m
> > CONFIG_CRC32_SELFTEST=y
> > # CONFIG_CRC32_SLICEBY8 is not set
> > # CONFIG_CRC32_SLICEBY4 is not set
> > # CONFIG_CRC32_SARWATE is not set
> > CONFIG_CRC32_BIT=y
> > # CONFIG_CRC7 is not set
> > CONFIG_LIBCRC32C=m
> > CONFIG_CRC8=m
> > CONFIG_ZLIB_INFLATE=m
> > CONFIG_ZLIB_DEFLATE=m
> > CONFIG_LZO_COMPRESS=y
> > CONFIG_LZO_DECOMPRESS=y
> > CONFIG_XZ_DEC=m
> > CONFIG_XZ_DEC_X86=y
> > CONFIG_XZ_DEC_POWERPC=y
> > CONFIG_XZ_DEC_IA64=y
> > CONFIG_XZ_DEC_ARM=y
> > CONFIG_XZ_DEC_ARMTHUMB=y
> > CONFIG_XZ_DEC_SPARC=y
> > CONFIG_XZ_DEC_BCJ=y
> > CONFIG_XZ_DEC_TEST=m
> > CONFIG_HAS_IOMEM=y
> > CONFIG_HAS_IOPORT=y
> > CONFIG_HAS_DMA=y
> > CONFIG_NLATTR=y
> > CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
> > # CONFIG_AVERAGE is not set
> > CONFIG_CLZ_TAB=y
> > CONFIG_CORDIC=m
> > CONFIG_DDR=y
> > CONFIG_MPILIB=y
> > CONFIG_OID_REGISTRY=y
> >
> >
>
--
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: Kernel panic
2012-12-02 17:30 Stefan Beller
@ 2012-12-02 17:51 ` Stefan Beller
2012-12-02 19:13 ` rh
0 siblings, 1 reply; 45+ messages in thread
From: Stefan Beller @ 2012-12-02 17:51 UTC (permalink / raw)
To: linux-kernel
So I tested vanilla v3.6 and v3.5 as well and this panic comes up.
Hence I guess my .config is screwed or the way I install the
kernel.
On 12/02/2012 06:30 PM, Stefan Beller wrote:
> Hello,
>
> so I tested v3.7-rc7-163-g3c46f3d and got a kernel panic.
> Usually I am running Ubuntu on my Dell Latitutde E6520,
> which usually works fine except some sound issues.
>
> I did this:
>
> git clone https://github.com/torvalds/linux.git
> cd linux
> make deb-pkg
> cd ..
> dpkg -i linux-headers-3.7.0-rc7+_3.7.0-rc7+-3_amd64.deb
> dpkg -i linux-image-3.7.0-rc7+_3.7.0-rc7+-3_amd64.deb
> dpkg -i linux-libc-dev_3.7.0-rc7+-3_amd64.deb
>
> Rebooting yields a panic,
> see panic stack trace and .config below
>
> How would I help further fixing this issue?
>
> ---------------------------------
> the screen reads:
> ---------------------------------
> early console in decompress_kernel
>
> Decompressing Linux... Parsing ELF... done.
> Booting the kernel.
> drivers/rtc/hctosyys.c: unable to open rtc device (rtc0)
> Kernel panic - not syncing: VFS Unable to mount root fs on unknown-block(0,0)
> Pid: 1, com: swapper/0 Not tainted 3.7.0-rc7+ #3
> Call Trace:
> [<ffffffff8127a2c3>] panic+0x11a/0x2b3
> [<ffffffff8147d42e>] mount_block_root+0x375/0x39a
> [<ffffffff8147d4bf>] mount_root+0x6c/0x77
> [<ffffffff8147d68b>] prepare_namespace+0x1c1/0x203
> [<ffffffff8106aeb3>] ? release_tgcred.isra.8+0x3c/0x3c
> [<ffffffff812750b5>] kernel_init+0x2ae/0x433
> [<ffffffff8147c5f8>] ? loglevel+0x46/0x46
> [<ffffffff81274e07>] ? rest_init+0xd3/0xd3
> [<ffffffff812832bc>] ret_from_fork+0x7c/0xb0
> [<ffffffff81274e07>] ? rest_init+0xd3/0xd3
>
> ---------------------------------
> .config
> ---------------------------------
>
> #
> # Automatically generated file; DO NOT EDIT.
> # Linux/x86_64 3.7.0-rc6 Kernel Configuration
> #
> CONFIG_64BIT=y
> CONFIG_X86_64=y
> CONFIG_X86=y
> CONFIG_INSTRUCTION_DECODER=y
> CONFIG_OUTPUT_FORMAT="elf64-x86-64"
> CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
> CONFIG_LOCKDEP_SUPPORT=y
> CONFIG_STACKTRACE_SUPPORT=y
> CONFIG_HAVE_LATENCYTOP_SUPPORT=y
> CONFIG_MMU=y
> CONFIG_NEED_DMA_MAP_STATE=y
> CONFIG_NEED_SG_DMA_LENGTH=y
> CONFIG_GENERIC_ISA_DMA=y
> CONFIG_GENERIC_BUG=y
> CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
> CONFIG_GENERIC_HWEIGHT=y
> CONFIG_ARCH_MAY_HAVE_PC_FDC=y
> CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> CONFIG_GENERIC_CALIBRATE_DELAY=y
> CONFIG_ARCH_HAS_CPU_RELAX=y
> CONFIG_ARCH_HAS_DEFAULT_IDLE=y
> CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
> CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
> CONFIG_HAVE_SETUP_PER_CPU_AREA=y
> CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
> CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
> CONFIG_ARCH_HIBERNATION_POSSIBLE=y
> CONFIG_ARCH_SUSPEND_POSSIBLE=y
> CONFIG_ZONE_DMA32=y
> CONFIG_AUDIT_ARCH=y
> CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
> CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
> CONFIG_X86_64_SMP=y
> CONFIG_X86_HT=y
> CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
> CONFIG_ARCH_SUPPORTS_UPROBES=y
> CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
> CONFIG_CONSTRUCTORS=y
> CONFIG_HAVE_IRQ_WORK=y
> CONFIG_IRQ_WORK=y
> CONFIG_BUILDTIME_EXTABLE_SORT=y
>
> #
> # General setup
> #
> CONFIG_EXPERIMENTAL=y
> CONFIG_INIT_ENV_ARG_LIMIT=32
> CONFIG_CROSS_COMPILE=""
> CONFIG_LOCALVERSION=""
> # CONFIG_LOCALVERSION_AUTO is not set
> CONFIG_HAVE_KERNEL_GZIP=y
> CONFIG_HAVE_KERNEL_BZIP2=y
> CONFIG_HAVE_KERNEL_LZMA=y
> CONFIG_HAVE_KERNEL_XZ=y
> CONFIG_HAVE_KERNEL_LZO=y
> # CONFIG_KERNEL_GZIP is not set
> # CONFIG_KERNEL_BZIP2 is not set
> CONFIG_KERNEL_LZMA=y
> # CONFIG_KERNEL_XZ is not set
> # CONFIG_KERNEL_LZO is not set
> CONFIG_DEFAULT_HOSTNAME="(none)"
> CONFIG_SWAP=y
> CONFIG_SYSVIPC=y
> CONFIG_SYSVIPC_SYSCTL=y
> CONFIG_FHANDLE=y
> CONFIG_HAVE_GENERIC_HARDIRQS=y
>
> #
> # IRQ subsystem
> #
> CONFIG_GENERIC_HARDIRQS=y
> CONFIG_GENERIC_IRQ_PROBE=y
> CONFIG_GENERIC_IRQ_SHOW=y
> CONFIG_GENERIC_PENDING_IRQ=y
> CONFIG_IRQ_DOMAIN=y
> # CONFIG_IRQ_DOMAIN_DEBUG is not set
> CONFIG_IRQ_FORCED_THREADING=y
> CONFIG_SPARSE_IRQ=y
> CONFIG_CLOCKSOURCE_WATCHDOG=y
> CONFIG_ARCH_CLOCKSOURCE_DATA=y
> CONFIG_GENERIC_TIME_VSYSCALL=y
> CONFIG_GENERIC_CLOCKEVENTS=y
> CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
> CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
> CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
> CONFIG_GENERIC_CMOS_UPDATE=y
>
> #
> # Timers subsystem
> #
> CONFIG_TICK_ONESHOT=y
> CONFIG_NO_HZ=y
> CONFIG_HIGH_RES_TIMERS=y
>
> #
> # CPU/Task time and stats accounting
> #
> # CONFIG_TICK_CPU_ACCOUNTING is not set
> CONFIG_IRQ_TIME_ACCOUNTING=y
> CONFIG_BSD_PROCESS_ACCT=y
> # CONFIG_BSD_PROCESS_ACCT_V3 is not set
>
> #
> # RCU Subsystem
> #
> CONFIG_TREE_PREEMPT_RCU=y
> CONFIG_PREEMPT_RCU=y
> # CONFIG_RCU_USER_QS is not set
> CONFIG_RCU_FANOUT=64
> CONFIG_RCU_FANOUT_LEAF=16
> CONFIG_RCU_FANOUT_EXACT=y
> # CONFIG_RCU_FAST_NO_HZ is not set
> # CONFIG_TREE_RCU_TRACE is not set
> CONFIG_RCU_BOOST=y
> CONFIG_RCU_BOOST_PRIO=1
> CONFIG_RCU_BOOST_DELAY=500
> # CONFIG_IKCONFIG is not set
> CONFIG_LOG_BUF_SHIFT=17
> CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
> # CONFIG_CGROUPS is not set
> # CONFIG_CHECKPOINT_RESTORE is not set
> CONFIG_NAMESPACES=y
> # CONFIG_UTS_NS is not set
> CONFIG_IPC_NS=y
> CONFIG_PID_NS=y
> # CONFIG_SCHED_AUTOGROUP is not set
> CONFIG_SYSFS_DEPRECATED=y
> CONFIG_SYSFS_DEPRECATED_V2=y
> # CONFIG_RELAY is not set
> # CONFIG_BLK_DEV_INITRD is not set
> CONFIG_CC_OPTIMIZE_FOR_SIZE=y
> CONFIG_SYSCTL=y
> CONFIG_ANON_INODES=y
> # CONFIG_EXPERT is not set
> # CONFIG_SYSCTL_SYSCALL is not set
> CONFIG_SYSCTL_EXCEPTION_TRACE=y
> CONFIG_KALLSYMS=y
> CONFIG_HOTPLUG=y
> CONFIG_PRINTK=y
> CONFIG_BUG=y
> CONFIG_ELF_CORE=y
> CONFIG_PCSPKR_PLATFORM=y
> CONFIG_HAVE_PCSPKR_PLATFORM=y
> CONFIG_BASE_FULL=y
> CONFIG_FUTEX=y
> CONFIG_EPOLL=y
> CONFIG_SIGNALFD=y
> CONFIG_TIMERFD=y
> CONFIG_EVENTFD=y
> CONFIG_SHMEM=y
> CONFIG_AIO=y
> # CONFIG_EMBEDDED is not set
> CONFIG_HAVE_PERF_EVENTS=y
>
> #
> # Kernel Performance Events And Counters
> #
> CONFIG_PERF_EVENTS=y
> CONFIG_VM_EVENT_COUNTERS=y
> CONFIG_SLUB_DEBUG=y
> CONFIG_COMPAT_BRK=y
> # CONFIG_SLAB is not set
> CONFIG_SLUB=y
> CONFIG_PROFILING=y
> CONFIG_TRACEPOINTS=y
> CONFIG_OPROFILE=m
> # CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
> CONFIG_HAVE_OPROFILE=y
> CONFIG_OPROFILE_NMI_TIMER=y
> # CONFIG_KPROBES is not set
> CONFIG_JUMP_LABEL=y
> CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
> CONFIG_HAVE_IOREMAP_PROT=y
> CONFIG_HAVE_KPROBES=y
> CONFIG_HAVE_KRETPROBES=y
> CONFIG_HAVE_OPTPROBES=y
> CONFIG_HAVE_ARCH_TRACEHOOK=y
> CONFIG_HAVE_DMA_ATTRS=y
> CONFIG_USE_GENERIC_SMP_HELPERS=y
> CONFIG_GENERIC_SMP_IDLE_THREAD=y
> CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
> CONFIG_HAVE_DMA_API_DEBUG=y
> CONFIG_HAVE_HW_BREAKPOINT=y
> CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
> CONFIG_HAVE_USER_RETURN_NOTIFIER=y
> CONFIG_HAVE_PERF_EVENTS_NMI=y
> CONFIG_HAVE_PERF_REGS=y
> CONFIG_HAVE_PERF_USER_STACK_DUMP=y
> CONFIG_HAVE_ARCH_JUMP_LABEL=y
> CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
> CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
> CONFIG_HAVE_CMPXCHG_LOCAL=y
> CONFIG_HAVE_CMPXCHG_DOUBLE=y
> CONFIG_GENERIC_KERNEL_THREAD=y
> CONFIG_GENERIC_KERNEL_EXECVE=y
> CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
> CONFIG_HAVE_RCU_USER_QS=y
> CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
> CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
> CONFIG_MODULES_USE_ELF_RELA=y
>
> #
> # GCOV-based kernel profiling
> #
> CONFIG_GCOV_KERNEL=y
> CONFIG_GCOV_PROFILE_ALL=y
> # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
> CONFIG_SLABINFO=y
> CONFIG_RT_MUTEXES=y
> CONFIG_BASE_SMALL=0
> CONFIG_MODULES=y
> CONFIG_MODULE_FORCE_LOAD=y
> # CONFIG_MODULE_UNLOAD is not set
> CONFIG_MODVERSIONS=y
> # CONFIG_MODULE_SRCVERSION_ALL is not set
> CONFIG_MODULE_SIG=y
> CONFIG_MODULE_SIG_FORCE=y
> # CONFIG_MODULE_SIG_SHA1 is not set
> # CONFIG_MODULE_SIG_SHA224 is not set
> # CONFIG_MODULE_SIG_SHA256 is not set
> CONFIG_MODULE_SIG_SHA384=y
> # CONFIG_MODULE_SIG_SHA512 is not set
> CONFIG_STOP_MACHINE=y
> CONFIG_BLOCK=y
> CONFIG_BLK_DEV_BSG=y
> # CONFIG_BLK_DEV_BSGLIB is not set
> # CONFIG_BLK_DEV_INTEGRITY is not set
>
> #
> # Partition Types
> #
> # CONFIG_PARTITION_ADVANCED is not set
> CONFIG_MSDOS_PARTITION=y
>
> #
> # IO Schedulers
> #
> CONFIG_IOSCHED_NOOP=y
> CONFIG_IOSCHED_DEADLINE=m
> # CONFIG_IOSCHED_CFQ is not set
> CONFIG_DEFAULT_NOOP=y
> CONFIG_DEFAULT_IOSCHED="noop"
> CONFIG_PADATA=y
> CONFIG_ASN1=y
> CONFIG_UNINLINE_SPIN_UNLOCK=y
> CONFIG_MUTEX_SPIN_ON_OWNER=y
> # CONFIG_FREEZER is not set
>
> #
> # Processor type and features
> #
> CONFIG_ZONE_DMA=y
> CONFIG_SMP=y
> CONFIG_X86_MPPARSE=y
> CONFIG_X86_EXTENDED_PLATFORM=y
> CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
> # CONFIG_SCHED_OMIT_FRAME_POINTER is not set
> CONFIG_PARAVIRT_GUEST=y
> CONFIG_PARAVIRT_TIME_ACCOUNTING=y
> # CONFIG_XEN is not set
> # CONFIG_XEN_PRIVILEGED_GUEST is not set
> CONFIG_KVM_GUEST=y
> CONFIG_PARAVIRT=y
> # CONFIG_PARAVIRT_SPINLOCKS is not set
> CONFIG_PARAVIRT_CLOCK=y
> CONFIG_NO_BOOTMEM=y
> # CONFIG_MEMTEST is not set
> # CONFIG_MK8 is not set
> # CONFIG_MPSC is not set
> # CONFIG_MCORE2 is not set
> # CONFIG_MATOM is not set
> CONFIG_GENERIC_CPU=y
> CONFIG_X86_INTERNODE_CACHE_SHIFT=6
> CONFIG_X86_CMPXCHG=y
> CONFIG_X86_L1_CACHE_SHIFT=6
> CONFIG_X86_XADD=y
> CONFIG_X86_WP_WORKS_OK=y
> CONFIG_X86_TSC=y
> CONFIG_X86_CMPXCHG64=y
> CONFIG_X86_CMOV=y
> CONFIG_X86_MINIMUM_CPU_FAMILY=64
> CONFIG_X86_DEBUGCTLMSR=y
> CONFIG_CPU_SUP_INTEL=y
> CONFIG_CPU_SUP_AMD=y
> CONFIG_CPU_SUP_CENTAUR=y
> CONFIG_HPET_TIMER=y
> CONFIG_HPET_EMULATE_RTC=y
> CONFIG_DMI=y
> CONFIG_SWIOTLB=y
> CONFIG_IOMMU_HELPER=y
> CONFIG_NR_CPUS=8
> CONFIG_SCHED_SMT=y
> CONFIG_SCHED_MC=y
> # CONFIG_PREEMPT_NONE is not set
> # CONFIG_PREEMPT_VOLUNTARY is not set
> CONFIG_PREEMPT=y
> CONFIG_PREEMPT_COUNT=y
> CONFIG_X86_LOCAL_APIC=y
> CONFIG_X86_IO_APIC=y
> CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
> CONFIG_X86_MCE=y
> # CONFIG_X86_MCE_INTEL is not set
> # CONFIG_X86_MCE_AMD is not set
> # CONFIG_X86_MCE_INJECT is not set
> CONFIG_I8K=m
> # CONFIG_MICROCODE is not set
> CONFIG_X86_MSR=m
> CONFIG_X86_CPUID=m
> CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
> CONFIG_ARCH_DMA_ADDR_T_64BIT=y
> CONFIG_DIRECT_GBPAGES=y
> CONFIG_NUMA=y
> # CONFIG_NUMA_EMU is not set
> CONFIG_NODES_SHIFT=6
> CONFIG_ARCH_SPARSEMEM_ENABLE=y
> CONFIG_ARCH_SPARSEMEM_DEFAULT=y
> CONFIG_ARCH_SELECT_MEMORY_MODEL=y
> CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
> CONFIG_SELECT_MEMORY_MODEL=y
> CONFIG_SPARSEMEM_MANUAL=y
> CONFIG_SPARSEMEM=y
> CONFIG_NEED_MULTIPLE_NODES=y
> CONFIG_HAVE_MEMORY_PRESENT=y
> CONFIG_SPARSEMEM_EXTREME=y
> CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
> CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
> # CONFIG_SPARSEMEM_VMEMMAP is not set
> CONFIG_HAVE_MEMBLOCK=y
> CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
> CONFIG_ARCH_DISCARD_MEMBLOCK=y
> CONFIG_MEMORY_ISOLATION=y
> # CONFIG_MEMORY_HOTPLUG is not set
> CONFIG_PAGEFLAGS_EXTENDED=y
> CONFIG_SPLIT_PTLOCK_CPUS=4
> CONFIG_COMPACTION=y
> CONFIG_MIGRATION=y
> CONFIG_PHYS_ADDR_T_64BIT=y
> CONFIG_ZONE_DMA_FLAG=1
> CONFIG_BOUNCE=y
> CONFIG_VIRT_TO_BUS=y
> CONFIG_KSM=y
> CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
> CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
> CONFIG_MEMORY_FAILURE=y
> CONFIG_TRANSPARENT_HUGEPAGE=y
> CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
> # CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
> CONFIG_CROSS_MEMORY_ATTACH=y
> # CONFIG_CLEANCACHE is not set
> # CONFIG_FRONTSWAP is not set
> # CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
> CONFIG_X86_RESERVE_LOW=64
> CONFIG_MTRR=y
> # CONFIG_MTRR_SANITIZER is not set
> CONFIG_X86_PAT=y
> CONFIG_ARCH_USES_PG_UNCACHED=y
> CONFIG_ARCH_RANDOM=y
> CONFIG_X86_SMAP=y
> # CONFIG_SECCOMP is not set
> # CONFIG_CC_STACKPROTECTOR is not set
> # CONFIG_HZ_100 is not set
> # CONFIG_HZ_250 is not set
> CONFIG_HZ_300=y
> # CONFIG_HZ_1000 is not set
> CONFIG_HZ=300
> CONFIG_SCHED_HRTICK=y
> # CONFIG_KEXEC is not set
> CONFIG_CRASH_DUMP=y
> CONFIG_PHYSICAL_START=0x1000000
> # CONFIG_RELOCATABLE is not set
> CONFIG_PHYSICAL_ALIGN=0x1000000
> # CONFIG_HOTPLUG_CPU is not set
> CONFIG_CMDLINE_BOOL=y
> CONFIG_CMDLINE=""
> # CONFIG_CMDLINE_OVERRIDE is not set
> CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
> CONFIG_USE_PERCPU_NUMA_NODE_ID=y
>
> #
> # Power management and ACPI options
> #
> # CONFIG_SUSPEND is not set
> # CONFIG_HIBERNATION is not set
> # CONFIG_PM_RUNTIME is not set
> CONFIG_SFI=y
>
> #
> # CPU Frequency scaling
> #
> CONFIG_CPU_FREQ=y
> CONFIG_CPU_FREQ_TABLE=m
> CONFIG_CPU_FREQ_STAT=m
> # CONFIG_CPU_FREQ_STAT_DETAILS is not set
> # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
> # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
> # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
> CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
> CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
> CONFIG_CPU_FREQ_GOV_POWERSAVE=m
> CONFIG_CPU_FREQ_GOV_USERSPACE=m
> # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
> CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
>
> #
> # x86 CPU frequency scaling drivers
> #
> # CONFIG_X86_P4_CLOCKMOD is not set
>
> #
> # shared options
> #
> # CONFIG_X86_SPEEDSTEP_LIB is not set
> # CONFIG_CPU_IDLE is not set
> # CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
>
> #
> # Memory power savings
> #
> CONFIG_I7300_IDLE_IOAT_CHANNEL=y
> CONFIG_I7300_IDLE=m
>
> #
> # Bus options (PCI etc.)
> #
> # CONFIG_PCI is not set
> CONFIG_PCI_LABEL=y
> CONFIG_ISA_DMA_API=y
> # CONFIG_PCCARD is not set
>
> #
> # Executable file formats / Emulations
> #
> CONFIG_BINFMT_ELF=y
> CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
> # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
> # CONFIG_HAVE_AOUT is not set
> CONFIG_BINFMT_MISC=m
> CONFIG_COREDUMP=y
> # CONFIG_IA32_EMULATION is not set
> CONFIG_HAVE_TEXT_POKE_SMP=y
> CONFIG_X86_DEV_DMA_OPS=y
> # CONFIG_NET is not set
> CONFIG_HAVE_BPF_JIT=y
>
> #
> # Device Drivers
> #
>
> #
> # Generic Driver Options
> #
> CONFIG_UEVENT_HELPER_PATH=""
> # CONFIG_DEVTMPFS is not set
> # CONFIG_STANDALONE is not set
> CONFIG_PREVENT_FIRMWARE_BUILD=y
> CONFIG_FW_LOADER=y
> CONFIG_FIRMWARE_IN_KERNEL=y
> CONFIG_EXTRA_FIRMWARE=""
> # CONFIG_SYS_HYPERVISOR is not set
> # CONFIG_GENERIC_CPU_DEVICES is not set
> CONFIG_REGMAP=y
> CONFIG_REGMAP_I2C=m
> CONFIG_REGMAP_SPI=y
> CONFIG_REGMAP_IRQ=y
> CONFIG_DMA_SHARED_BUFFER=y
>
> #
> # Bus devices
> #
> CONFIG_OMAP_OCP2SCP=m
> CONFIG_MTD=m
> CONFIG_MTD_TESTS=m
> CONFIG_MTD_REDBOOT_PARTS=m
> CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
> # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
> CONFIG_MTD_REDBOOT_PARTS_READONLY=y
> # CONFIG_MTD_AR7_PARTS is not set
>
> #
> # User Modules And Translation Layers
> #
> # CONFIG_MTD_CHAR is not set
> CONFIG_HAVE_MTD_OTP=y
> CONFIG_MTD_BLKDEVS=m
> CONFIG_MTD_BLOCK=m
> CONFIG_MTD_BLOCK_RO=m
> CONFIG_FTL=m
> # CONFIG_NFTL is not set
> # CONFIG_INFTL is not set
> CONFIG_RFD_FTL=m
> # CONFIG_SSFDC is not set
> CONFIG_SM_FTL=m
> # CONFIG_MTD_OOPS is not set
> CONFIG_MTD_SWAP=m
>
> #
> # RAM/ROM/Flash chip drivers
> #
> CONFIG_MTD_CFI=m
> CONFIG_MTD_JEDECPROBE=m
> CONFIG_MTD_GEN_PROBE=m
> CONFIG_MTD_CFI_ADV_OPTIONS=y
> CONFIG_MTD_CFI_NOSWAP=y
> # CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
> # CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
> # CONFIG_MTD_CFI_GEOMETRY is not set
> CONFIG_MTD_MAP_BANK_WIDTH_1=y
> CONFIG_MTD_MAP_BANK_WIDTH_2=y
> CONFIG_MTD_MAP_BANK_WIDTH_4=y
> # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
> # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
> # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
> CONFIG_MTD_CFI_I1=y
> CONFIG_MTD_CFI_I2=y
> # CONFIG_MTD_CFI_I4 is not set
> # CONFIG_MTD_CFI_I8 is not set
> CONFIG_MTD_OTP=y
> CONFIG_MTD_CFI_INTELEXT=m
> CONFIG_MTD_CFI_AMDSTD=m
> # CONFIG_MTD_CFI_STAA is not set
> CONFIG_MTD_CFI_UTIL=m
> CONFIG_MTD_RAM=m
> # CONFIG_MTD_ROM is not set
> CONFIG_MTD_ABSENT=m
>
> #
> # Mapping drivers for chip access
> #
> CONFIG_MTD_COMPLEX_MAPPINGS=y
> CONFIG_MTD_PHYSMAP=m
> CONFIG_MTD_PHYSMAP_COMPAT=y
> CONFIG_MTD_PHYSMAP_START=0x8000000
> CONFIG_MTD_PHYSMAP_LEN=0
> CONFIG_MTD_PHYSMAP_BANKWIDTH=2
> CONFIG_MTD_SC520CDP=m
> CONFIG_MTD_NETSC520=m
> CONFIG_MTD_TS5500=m
> # CONFIG_MTD_SBC_GXX is not set
> # CONFIG_MTD_AMD76XROM is not set
> CONFIG_MTD_ICHXROM=m
> # CONFIG_MTD_NETtel is not set
> CONFIG_MTD_L440GX=m
> CONFIG_MTD_PLATRAM=m
> # CONFIG_MTD_LATCH_ADDR is not set
>
> #
> # Self-contained MTD device drivers
> #
> CONFIG_MTD_DATAFLASH=m
> CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
> # CONFIG_MTD_DATAFLASH_OTP is not set
> CONFIG_MTD_M25P80=m
> CONFIG_M25PXX_USE_FAST_READ=y
> CONFIG_MTD_SST25L=m
> # CONFIG_MTD_SLRAM is not set
> # CONFIG_MTD_PHRAM is not set
> # CONFIG_MTD_MTDRAM is not set
> CONFIG_MTD_BLOCK2MTD=m
>
> #
> # Disk-On-Chip Device Drivers
> #
> # CONFIG_MTD_DOCG3 is not set
> CONFIG_MTD_NAND_ECC=m
> # CONFIG_MTD_NAND_ECC_SMC is not set
> # CONFIG_MTD_NAND is not set
> # CONFIG_MTD_ONENAND is not set
>
> #
> # LPDDR flash memory drivers
> #
> # CONFIG_MTD_LPDDR is not set
> # CONFIG_MTD_UBI is not set
> # CONFIG_PARPORT is not set
> # CONFIG_BLK_DEV is not set
>
> #
> # Misc devices
> #
> CONFIG_SENSORS_LIS3LV02D=m
> CONFIG_AD525X_DPOT=m
> # CONFIG_AD525X_DPOT_I2C is not set
> # CONFIG_AD525X_DPOT_SPI is not set
> # CONFIG_ICS932S401 is not set
> # CONFIG_ENCLOSURE_SERVICES is not set
> # CONFIG_APDS9802ALS is not set
> # CONFIG_ISL29003 is not set
> # CONFIG_ISL29020 is not set
> # CONFIG_SENSORS_TSL2550 is not set
> # CONFIG_SENSORS_BH1780 is not set
> # CONFIG_SENSORS_BH1770 is not set
> CONFIG_SENSORS_APDS990X=m
> # CONFIG_HMC6352 is not set
> # CONFIG_DS1682 is not set
> CONFIG_TI_DAC7512=m
> # CONFIG_VMWARE_BALLOON is not set
> # CONFIG_BMP085_I2C is not set
> # CONFIG_BMP085_SPI is not set
> # CONFIG_USB_SWITCH_FSA9480 is not set
> CONFIG_C2PORT=m
> # CONFIG_C2PORT_DURAMAR_2150 is not set
>
> #
> # EEPROM support
> #
> # CONFIG_EEPROM_AT24 is not set
> CONFIG_EEPROM_AT25=m
> CONFIG_EEPROM_LEGACY=m
> CONFIG_EEPROM_MAX6875=m
> # CONFIG_EEPROM_93CX6 is not set
> # CONFIG_EEPROM_93XX46 is not set
>
> #
> # Texas Instruments shared transport line discipline
> #
> CONFIG_SENSORS_LIS3_SPI=m
> # CONFIG_SENSORS_LIS3_I2C is not set
>
> #
> # Altera FPGA firmware download module
> #
> CONFIG_ALTERA_STAPL=m
> CONFIG_HAVE_IDE=y
> # CONFIG_IDE is not set
>
> #
> # SCSI device support
> #
> CONFIG_SCSI_MOD=y
> # CONFIG_RAID_ATTRS is not set
> # CONFIG_SCSI is not set
> # CONFIG_SCSI_DMA is not set
> # CONFIG_SCSI_NETLINK is not set
> # CONFIG_ATA is not set
> # CONFIG_MD is not set
> CONFIG_MACINTOSH_DRIVERS=y
> # CONFIG_MAC_EMUMOUSEBTN is not set
>
> #
> # Input device support
> #
> CONFIG_INPUT=y
> # CONFIG_INPUT_FF_MEMLESS is not set
> CONFIG_INPUT_POLLDEV=m
> CONFIG_INPUT_SPARSEKMAP=m
> CONFIG_INPUT_MATRIXKMAP=m
>
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> CONFIG_INPUT_MOUSEDEV_PSAUX=y
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> # CONFIG_INPUT_JOYDEV is not set
> # CONFIG_INPUT_EVDEV is not set
> # CONFIG_INPUT_EVBUG is not set
>
> #
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=y
> CONFIG_KEYBOARD_ADP5588=m
> # CONFIG_KEYBOARD_ADP5589 is not set
> CONFIG_KEYBOARD_ATKBD=y
> # CONFIG_KEYBOARD_QT1070 is not set
> # CONFIG_KEYBOARD_QT2160 is not set
> # CONFIG_KEYBOARD_LKKBD is not set
> # CONFIG_KEYBOARD_TCA6416 is not set
> # CONFIG_KEYBOARD_TCA8418 is not set
> CONFIG_KEYBOARD_LM8323=m
> CONFIG_KEYBOARD_LM8333=m
> CONFIG_KEYBOARD_MAX7359=m
> # CONFIG_KEYBOARD_MCS is not set
> # CONFIG_KEYBOARD_MPR121 is not set
> # CONFIG_KEYBOARD_NEWTON is not set
> # CONFIG_KEYBOARD_OPENCORES is not set
> # CONFIG_KEYBOARD_STOWAWAY is not set
> CONFIG_KEYBOARD_SUNKBD=m
> CONFIG_KEYBOARD_STMPE=m
> CONFIG_KEYBOARD_OMAP4=m
> # CONFIG_KEYBOARD_XTKBD is not set
> # CONFIG_INPUT_MOUSE is not set
> CONFIG_INPUT_JOYSTICK=y
> # CONFIG_JOYSTICK_ANALOG is not set
> CONFIG_JOYSTICK_A3D=m
> CONFIG_JOYSTICK_ADI=m
> # CONFIG_JOYSTICK_COBRA is not set
> # CONFIG_JOYSTICK_GF2K is not set
> CONFIG_JOYSTICK_GRIP=m
> # CONFIG_JOYSTICK_GRIP_MP is not set
> CONFIG_JOYSTICK_GUILLEMOT=m
> # CONFIG_JOYSTICK_INTERACT is not set
> # CONFIG_JOYSTICK_SIDEWINDER is not set
> # CONFIG_JOYSTICK_TMDC is not set
> # CONFIG_JOYSTICK_IFORCE is not set
> CONFIG_JOYSTICK_WARRIOR=m
> CONFIG_JOYSTICK_MAGELLAN=m
> CONFIG_JOYSTICK_SPACEORB=m
> CONFIG_JOYSTICK_SPACEBALL=m
> # CONFIG_JOYSTICK_STINGER is not set
> CONFIG_JOYSTICK_TWIDJOY=m
> CONFIG_JOYSTICK_ZHENHUA=m
> # CONFIG_JOYSTICK_AS5011 is not set
> # CONFIG_JOYSTICK_JOYDUMP is not set
> CONFIG_INPUT_TABLET=y
> # CONFIG_INPUT_TOUCHSCREEN is not set
> # CONFIG_INPUT_MISC is not set
>
> #
> # Hardware I/O ports
> #
> CONFIG_SERIO=y
> CONFIG_SERIO_I8042=y
> CONFIG_SERIO_SERPORT=m
> CONFIG_SERIO_CT82C710=m
> CONFIG_SERIO_LIBPS2=y
> CONFIG_SERIO_RAW=m
> # CONFIG_SERIO_ALTERA_PS2 is not set
> CONFIG_SERIO_PS2MULT=m
> CONFIG_GAMEPORT=m
> CONFIG_GAMEPORT_NS558=m
> # CONFIG_GAMEPORT_L4 is not set
>
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_CONSOLE_TRANSLATIONS=y
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> # CONFIG_VT_HW_CONSOLE_BINDING is not set
> CONFIG_UNIX98_PTYS=y
> CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
> # CONFIG_LEGACY_PTYS is not set
> CONFIG_SERIAL_NONSTANDARD=y
> # CONFIG_N_HDLC is not set
> CONFIG_TRACE_ROUTER=m
> CONFIG_TRACE_SINK=m
> # CONFIG_DEVKMEM is not set
> # CONFIG_STALDRV is not set
>
> #
> # Serial drivers
> #
> CONFIG_SERIAL_8250=m
> CONFIG_FIX_EARLYCON_MEM=y
> CONFIG_SERIAL_8250_NR_UARTS=4
> CONFIG_SERIAL_8250_RUNTIME_UARTS=4
> CONFIG_SERIAL_8250_EXTENDED=y
> CONFIG_SERIAL_8250_MANY_PORTS=y
> CONFIG_SERIAL_8250_SHARE_IRQ=y
> CONFIG_SERIAL_8250_DETECT_IRQ=y
> CONFIG_SERIAL_8250_RSA=y
>
> #
> # Non-8250 serial port support
> #
> # CONFIG_SERIAL_MAX3100 is not set
> # CONFIG_SERIAL_MAX310X is not set
> CONFIG_SERIAL_CORE=m
> # CONFIG_SERIAL_SCCNXP is not set
> CONFIG_SERIAL_TIMBERDALE=m
> CONFIG_SERIAL_ALTERA_JTAGUART=m
> CONFIG_SERIAL_ALTERA_UART=m
> CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
> CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
> # CONFIG_SERIAL_XILINX_PS_UART is not set
> CONFIG_HVC_DRIVER=y
> CONFIG_VIRTIO_CONSOLE=m
> CONFIG_IPMI_HANDLER=m
> # CONFIG_IPMI_PANIC_EVENT is not set
> CONFIG_IPMI_DEVICE_INTERFACE=m
> CONFIG_IPMI_SI=m
> # CONFIG_IPMI_WATCHDOG is not set
> CONFIG_IPMI_POWEROFF=m
> CONFIG_HW_RANDOM=m
> # CONFIG_HW_RANDOM_TIMERIOMEM is not set
> # CONFIG_HW_RANDOM_VIA is not set
> CONFIG_HW_RANDOM_VIRTIO=m
> # CONFIG_HW_RANDOM_TPM is not set
> CONFIG_NVRAM=m
> CONFIG_R3964=m
> # CONFIG_MWAVE is not set
> CONFIG_RAW_DRIVER=m
> CONFIG_MAX_RAW_DEVS=256
> # CONFIG_HANGCHECK_TIMER is not set
> CONFIG_TCG_TPM=m
> # CONFIG_TCG_TIS is not set
> CONFIG_TCG_TIS_I2C_INFINEON=m
> # CONFIG_TCG_NSC is not set
> # CONFIG_TCG_ATMEL is not set
> # CONFIG_TELCLOCK is not set
> CONFIG_I2C=m
> CONFIG_I2C_BOARDINFO=y
> CONFIG_I2C_COMPAT=y
> # CONFIG_I2C_CHARDEV is not set
> # CONFIG_I2C_MUX is not set
> CONFIG_I2C_HELPER_AUTO=y
> CONFIG_I2C_SMBUS=m
> CONFIG_I2C_ALGOBIT=m
> CONFIG_I2C_ALGOPCA=m
>
> #
> # I2C Hardware Bus support
> #
>
> #
> # I2C system bus drivers (mostly embedded / system-on-chip)
> #
> CONFIG_I2C_OCORES=m
> CONFIG_I2C_PCA_PLATFORM=m
> # CONFIG_I2C_PXA_PCI is not set
> # CONFIG_I2C_SIMTEC is not set
> CONFIG_I2C_XILINX=m
>
> #
> # External I2C/SMBus adapter drivers
> #
> CONFIG_I2C_PARPORT_LIGHT=m
> # CONFIG_I2C_TAOS_EVM is not set
>
> #
> # Other I2C/SMBus bus drivers
> #
> # CONFIG_I2C_STUB is not set
> CONFIG_I2C_DEBUG_CORE=y
> # CONFIG_I2C_DEBUG_ALGO is not set
> CONFIG_I2C_DEBUG_BUS=y
> CONFIG_SPI=y
> CONFIG_SPI_MASTER=y
>
> #
> # SPI Master Controller Drivers
> #
> # CONFIG_SPI_ALTERA is not set
> CONFIG_SPI_BITBANG=m
> # CONFIG_SPI_PXA2XX_PCI is not set
> # CONFIG_SPI_SC18IS602 is not set
> # CONFIG_SPI_XCOMM is not set
> CONFIG_SPI_XILINX=m
> CONFIG_SPI_DESIGNWARE=m
>
> #
> # SPI Protocol Masters
> #
> # CONFIG_SPI_SPIDEV is not set
> CONFIG_SPI_TLE62X0=m
> CONFIG_HSI=m
> CONFIG_HSI_BOARDINFO=y
>
> #
> # HSI clients
> #
> # CONFIG_HSI_CHAR is not set
>
> #
> # PPS support
> #
> # CONFIG_PPS is not set
>
> #
> # PPS generators support
> #
>
> #
> # PTP clock support
> #
>
> #
> # Enable Device Drivers -> PPS to see the PTP clock options.
> #
> CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
> # CONFIG_GPIOLIB is not set
> CONFIG_W1=m
>
> #
> # 1-wire Bus Masters
> #
> # CONFIG_W1_MASTER_DS2482 is not set
> CONFIG_W1_MASTER_DS1WM=m
> CONFIG_HDQ_MASTER_OMAP=m
>
> #
> # 1-wire Slaves
> #
> CONFIG_W1_SLAVE_THERM=m
> # CONFIG_W1_SLAVE_SMEM is not set
> CONFIG_W1_SLAVE_DS2408=m
> CONFIG_W1_SLAVE_DS2423=m
> # CONFIG_W1_SLAVE_DS2431 is not set
> CONFIG_W1_SLAVE_DS2433=m
> CONFIG_W1_SLAVE_DS2433_CRC=y
> # CONFIG_W1_SLAVE_DS2760 is not set
> CONFIG_W1_SLAVE_DS2780=m
> # CONFIG_W1_SLAVE_DS2781 is not set
> CONFIG_W1_SLAVE_DS28E04=m
> # CONFIG_W1_SLAVE_BQ27000 is not set
> CONFIG_POWER_SUPPLY=y
> # CONFIG_POWER_SUPPLY_DEBUG is not set
> # CONFIG_PDA_POWER is not set
> # CONFIG_TEST_POWER is not set
> CONFIG_BATTERY_DS2780=m
> # CONFIG_BATTERY_DS2781 is not set
> # CONFIG_BATTERY_DS2782 is not set
> CONFIG_BATTERY_SBS=m
> CONFIG_BATTERY_BQ27x00=m
> # CONFIG_BATTERY_BQ27X00_I2C is not set
> CONFIG_BATTERY_BQ27X00_PLATFORM=y
> # CONFIG_BATTERY_DA9052 is not set
> CONFIG_BATTERY_MAX17040=m
> CONFIG_BATTERY_MAX17042=m
> CONFIG_CHARGER_PCF50633=m
> # CONFIG_CHARGER_MAX8903 is not set
> # CONFIG_CHARGER_LP8727 is not set
> CONFIG_CHARGER_MANAGER=y
> # CONFIG_CHARGER_SMB347 is not set
> CONFIG_POWER_AVS=y
> CONFIG_HWMON=m
> CONFIG_HWMON_VID=m
> # CONFIG_HWMON_DEBUG_CHIP is not set
>
> #
> # Native drivers
> #
> # CONFIG_SENSORS_ABITUGURU is not set
> CONFIG_SENSORS_ABITUGURU3=m
> CONFIG_SENSORS_AD7314=m
> CONFIG_SENSORS_AD7414=m
> CONFIG_SENSORS_AD7418=m
> CONFIG_SENSORS_ADCXX=m
> # CONFIG_SENSORS_ADM1021 is not set
> CONFIG_SENSORS_ADM1025=m
> CONFIG_SENSORS_ADM1026=m
> CONFIG_SENSORS_ADM1029=m
> # CONFIG_SENSORS_ADM1031 is not set
> CONFIG_SENSORS_ADM9240=m
> CONFIG_SENSORS_ADT7410=m
> # CONFIG_SENSORS_ADT7411 is not set
> CONFIG_SENSORS_ADT7462=m
> # CONFIG_SENSORS_ADT7470 is not set
> # CONFIG_SENSORS_ADT7475 is not set
> # CONFIG_SENSORS_ASC7621 is not set
> # CONFIG_SENSORS_ASB100 is not set
> CONFIG_SENSORS_ATXP1=m
> CONFIG_SENSORS_DS620=m
> # CONFIG_SENSORS_DS1621 is not set
> CONFIG_SENSORS_DA9052_ADC=m
> # CONFIG_SENSORS_F71805F is not set
> # CONFIG_SENSORS_F71882FG is not set
> CONFIG_SENSORS_F75375S=m
> CONFIG_SENSORS_FSCHMD=m
> CONFIG_SENSORS_G760A=m
> CONFIG_SENSORS_GL518SM=m
> # CONFIG_SENSORS_GL520SM is not set
> CONFIG_SENSORS_HIH6130=m
> CONFIG_SENSORS_IBMAEM=m
> # CONFIG_SENSORS_IBMPEX is not set
> # CONFIG_SENSORS_IT87 is not set
> CONFIG_SENSORS_JC42=m
> CONFIG_SENSORS_LINEAGE=m
> CONFIG_SENSORS_LM63=m
> # CONFIG_SENSORS_LM70 is not set
> CONFIG_SENSORS_LM73=m
> CONFIG_SENSORS_LM75=m
> # CONFIG_SENSORS_LM77 is not set
> CONFIG_SENSORS_LM78=m
> # CONFIG_SENSORS_LM80 is not set
> CONFIG_SENSORS_LM83=m
> CONFIG_SENSORS_LM85=m
> CONFIG_SENSORS_LM87=m
> CONFIG_SENSORS_LM90=m
> # CONFIG_SENSORS_LM92 is not set
> CONFIG_SENSORS_LM93=m
> # CONFIG_SENSORS_LTC4151 is not set
> CONFIG_SENSORS_LTC4215=m
> CONFIG_SENSORS_LTC4245=m
> CONFIG_SENSORS_LTC4261=m
> # CONFIG_SENSORS_LM95241 is not set
> CONFIG_SENSORS_LM95245=m
> # CONFIG_SENSORS_MAX1111 is not set
> # CONFIG_SENSORS_MAX16065 is not set
> # CONFIG_SENSORS_MAX1619 is not set
> # CONFIG_SENSORS_MAX1668 is not set
> # CONFIG_SENSORS_MAX197 is not set
> CONFIG_SENSORS_MAX6639=m
> # CONFIG_SENSORS_MAX6642 is not set
> CONFIG_SENSORS_MAX6650=m
> CONFIG_SENSORS_MCP3021=m
> # CONFIG_SENSORS_NTC_THERMISTOR is not set
> CONFIG_SENSORS_PC87360=m
> # CONFIG_SENSORS_PC87427 is not set
> # CONFIG_SENSORS_PCF8591 is not set
> # CONFIG_PMBUS is not set
> CONFIG_SENSORS_SHT21=m
> # CONFIG_SENSORS_SMM665 is not set
> CONFIG_SENSORS_DME1737=m
> CONFIG_SENSORS_EMC1403=m
> CONFIG_SENSORS_EMC2103=m
> CONFIG_SENSORS_EMC6W201=m
> CONFIG_SENSORS_SMSC47M1=m
> # CONFIG_SENSORS_SMSC47M192 is not set
> CONFIG_SENSORS_SMSC47B397=m
> # CONFIG_SENSORS_SCH56XX_COMMON is not set
> # CONFIG_SENSORS_SCH5627 is not set
> # CONFIG_SENSORS_SCH5636 is not set
> CONFIG_SENSORS_ADS1015=m
> # CONFIG_SENSORS_ADS7828 is not set
> # CONFIG_SENSORS_ADS7871 is not set
> CONFIG_SENSORS_AMC6821=m
> # CONFIG_SENSORS_INA2XX is not set
> # CONFIG_SENSORS_THMC50 is not set
> # CONFIG_SENSORS_TMP102 is not set
> # CONFIG_SENSORS_TMP401 is not set
> # CONFIG_SENSORS_TMP421 is not set
> CONFIG_SENSORS_VIA_CPUTEMP=m
> # CONFIG_SENSORS_VT1211 is not set
> # CONFIG_SENSORS_W83781D is not set
> CONFIG_SENSORS_W83791D=m
> # CONFIG_SENSORS_W83792D is not set
> CONFIG_SENSORS_W83793=m
> CONFIG_SENSORS_W83795=m
> # CONFIG_SENSORS_W83795_FANCTRL is not set
> CONFIG_SENSORS_W83L785TS=m
> # CONFIG_SENSORS_W83L786NG is not set
> CONFIG_SENSORS_W83627HF=m
> CONFIG_SENSORS_W83627EHF=m
> # CONFIG_SENSORS_APPLESMC is not set
> # CONFIG_SENSORS_MC13783_ADC is not set
> CONFIG_THERMAL=m
> CONFIG_THERMAL_HWMON=y
> # CONFIG_CPU_THERMAL is not set
> CONFIG_WATCHDOG=y
> CONFIG_WATCHDOG_CORE=y
> # CONFIG_WATCHDOG_NOWAYOUT is not set
>
> #
> # Watchdog Device Drivers
> #
> # CONFIG_SOFT_WATCHDOG is not set
> CONFIG_DA9052_WATCHDOG=m
> # CONFIG_ACQUIRE_WDT is not set
> # CONFIG_ADVANTECH_WDT is not set
> CONFIG_F71808E_WDT=m
> CONFIG_SC520_WDT=m
> # CONFIG_SBC_FITPC2_WATCHDOG is not set
> CONFIG_EUROTECH_WDT=m
> CONFIG_IB700_WDT=m
> CONFIG_IBMASR=m
> CONFIG_WAFER_WDT=m
> CONFIG_IT8712F_WDT=m
> # CONFIG_IT87_WDT is not set
> # CONFIG_SC1200_WDT is not set
> CONFIG_PC87413_WDT=m
> CONFIG_60XX_WDT=m
> # CONFIG_SBC8360_WDT is not set
> # CONFIG_CPU5_WDT is not set
> # CONFIG_SMSC_SCH311X_WDT is not set
> CONFIG_SMSC37B787_WDT=m
> CONFIG_W83627HF_WDT=m
> CONFIG_W83697HF_WDT=m
> # CONFIG_W83697UG_WDT is not set
> CONFIG_W83877F_WDT=m
> CONFIG_W83977F_WDT=m
> CONFIG_MACHZ_WDT=m
> # CONFIG_SBC_EPX_C3_WATCHDOG is not set
> CONFIG_SSB_POSSIBLE=y
>
> #
> # Sonics Silicon Backplane
> #
> CONFIG_SSB=m
> CONFIG_SSB_DEBUG=y
> CONFIG_BCMA_POSSIBLE=y
>
> #
> # Broadcom specific AMBA
> #
> CONFIG_BCMA=m
> CONFIG_BCMA_DRIVER_GMAC_CMN=y
> # CONFIG_BCMA_DEBUG is not set
>
> #
> # Multifunction device drivers
> #
> CONFIG_MFD_CORE=y
> CONFIG_MFD_SM501=m
> CONFIG_HTC_PASIC3=m
> # CONFIG_MFD_LM3533 is not set
> CONFIG_TPS6105X=m
> CONFIG_TPS6507X=m
> CONFIG_MFD_TPS65217=m
> CONFIG_MFD_STMPE=y
>
> #
> # STMPE Interface Drivers
> #
> CONFIG_STMPE_SPI=y
> # CONFIG_MFD_TMIO is not set
> CONFIG_PMIC_DA9052=y
> CONFIG_MFD_DA9052_SPI=y
> CONFIG_MFD_ARIZONA=y
> # CONFIG_MFD_ARIZONA_I2C is not set
> CONFIG_MFD_ARIZONA_SPI=m
> CONFIG_MFD_WM5102=y
> # CONFIG_MFD_WM5110 is not set
> # CONFIG_MFD_WM831X_SPI is not set
> CONFIG_MFD_PCF50633=m
> CONFIG_PCF50633_ADC=m
> CONFIG_PCF50633_GPIO=m
> CONFIG_MFD_MC13783=m
> CONFIG_MFD_MC13XXX=m
> CONFIG_MFD_MC13XXX_SPI=m
> # CONFIG_MFD_MC13XXX_I2C is not set
> # CONFIG_ABX500_CORE is not set
> CONFIG_EZX_PCAP=y
> CONFIG_MFD_WL1273_CORE=m
> CONFIG_REGULATOR=y
> # CONFIG_REGULATOR_DEBUG is not set
> # CONFIG_REGULATOR_DUMMY is not set
> CONFIG_REGULATOR_FIXED_VOLTAGE=m
> # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
> CONFIG_REGULATOR_USERSPACE_CONSUMER=m
> CONFIG_REGULATOR_AD5398=m
> CONFIG_REGULATOR_ARIZONA=m
> CONFIG_REGULATOR_DA9052=m
> CONFIG_REGULATOR_FAN53555=m
> CONFIG_REGULATOR_MC13XXX_CORE=m
> CONFIG_REGULATOR_MC13783=m
> # CONFIG_REGULATOR_MC13892 is not set
> CONFIG_REGULATOR_ISL6271A=m
> CONFIG_REGULATOR_MAX1586=m
> # CONFIG_REGULATOR_MAX8649 is not set
> CONFIG_REGULATOR_MAX8660=m
> CONFIG_REGULATOR_MAX8952=m
> # CONFIG_REGULATOR_PCAP is not set
> CONFIG_REGULATOR_LP3971=m
> # CONFIG_REGULATOR_LP3972 is not set
> # CONFIG_REGULATOR_PCF50633 is not set
> # CONFIG_REGULATOR_TPS6105X is not set
> CONFIG_REGULATOR_TPS62360=m
> # CONFIG_REGULATOR_TPS65023 is not set
> CONFIG_REGULATOR_TPS6507X=m
> # CONFIG_REGULATOR_TPS65217 is not set
> # CONFIG_REGULATOR_TPS6524X is not set
> CONFIG_MEDIA_SUPPORT=m
>
> #
> # Multimedia core support
> #
> # CONFIG_MEDIA_CAMERA_SUPPORT is not set
> CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
> # CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
> CONFIG_MEDIA_RADIO_SUPPORT=y
> # CONFIG_MEDIA_RC_SUPPORT is not set
> CONFIG_VIDEO_DEV=m
> CONFIG_VIDEO_V4L2=m
> CONFIG_VIDEO_ADV_DEBUG=y
> # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
>
> #
> # Media drivers
> #
>
> #
> # Supported MMC/SDIO adapters
> #
> CONFIG_RADIO_ADAPTERS=y
> CONFIG_RADIO_SI470X=y
> CONFIG_I2C_SI470X=m
> CONFIG_I2C_SI4713=m
> CONFIG_RADIO_SI4713=m
> # CONFIG_RADIO_TEA5764 is not set
> CONFIG_RADIO_SAA7706H=m
> # CONFIG_RADIO_TEF6862 is not set
> # CONFIG_RADIO_WL1273 is not set
>
> #
> # Texas Instruments WL128x FM driver (ST based)
> #
> # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
>
> #
> # Media ancillary drivers (tuners, sensors, i2c, frontends)
> #
>
> #
> # Encoders, decoders, sensors and other helper chips
> #
>
> #
> # Audio decoders, processors and mixers
> #
> CONFIG_VIDEO_TVAUDIO=m
> # CONFIG_VIDEO_TDA7432 is not set
> # CONFIG_VIDEO_TDA9840 is not set
> # CONFIG_VIDEO_TEA6415C is not set
> # CONFIG_VIDEO_TEA6420 is not set
> # CONFIG_VIDEO_MSP3400 is not set
> CONFIG_VIDEO_CS5345=m
> CONFIG_VIDEO_CS53L32A=m
> CONFIG_VIDEO_TLV320AIC23B=m
> # CONFIG_VIDEO_WM8775 is not set
> CONFIG_VIDEO_WM8739=m
> # CONFIG_VIDEO_VP27SMPX is not set
>
> #
> # RDS decoders
> #
> CONFIG_VIDEO_SAA6588=m
>
> #
> # Video decoders
> #
> CONFIG_VIDEO_ADV7180=m
> # CONFIG_VIDEO_ADV7183 is not set
> # CONFIG_VIDEO_BT819 is not set
> CONFIG_VIDEO_BT856=m
> CONFIG_VIDEO_BT866=m
> CONFIG_VIDEO_KS0127=m
> # CONFIG_VIDEO_SAA7110 is not set
> # CONFIG_VIDEO_SAA711X is not set
> # CONFIG_VIDEO_SAA7191 is not set
> # CONFIG_VIDEO_TVP514X is not set
> # CONFIG_VIDEO_TVP5150 is not set
> CONFIG_VIDEO_TVP7002=m
> CONFIG_VIDEO_VPX3220=m
>
> #
> # Video and audio decoders
> #
> CONFIG_VIDEO_SAA717X=m
> CONFIG_VIDEO_CX25840=m
>
> #
> # MPEG video encoders
> #
> CONFIG_VIDEO_CX2341X=m
>
> #
> # Video encoders
> #
> # CONFIG_VIDEO_SAA7127 is not set
> # CONFIG_VIDEO_SAA7185 is not set
> CONFIG_VIDEO_ADV7170=m
> CONFIG_VIDEO_ADV7175=m
> CONFIG_VIDEO_ADV7343=m
> CONFIG_VIDEO_ADV7393=m
> # CONFIG_VIDEO_AK881X is not set
>
> #
> # Camera sensor devices
> #
>
> #
> # Flash devices
> #
>
> #
> # Video improvement chips
> #
> CONFIG_VIDEO_UPD64031A=m
> # CONFIG_VIDEO_UPD64083 is not set
>
> #
> # Miscelaneous helper chips
> #
> # CONFIG_VIDEO_THS7303 is not set
> # CONFIG_VIDEO_M52790 is not set
>
> #
> # Sensors used on soc_camera driver
> #
> # CONFIG_MEDIA_ATTACH is not set
> CONFIG_MEDIA_TUNER=m
>
> #
> # Customize TV tuners
> #
> # CONFIG_MEDIA_TUNER_SIMPLE is not set
> # CONFIG_MEDIA_TUNER_TDA8290 is not set
> CONFIG_MEDIA_TUNER_TDA827X=m
> CONFIG_MEDIA_TUNER_TDA18271=m
> CONFIG_MEDIA_TUNER_TDA9887=m
> CONFIG_MEDIA_TUNER_TEA5761=m
> CONFIG_MEDIA_TUNER_TEA5767=m
> CONFIG_MEDIA_TUNER_MT20XX=m
> CONFIG_MEDIA_TUNER_MT2060=m
> # CONFIG_MEDIA_TUNER_MT2063 is not set
> CONFIG_MEDIA_TUNER_MT2266=m
> CONFIG_MEDIA_TUNER_MT2131=m
> CONFIG_MEDIA_TUNER_QT1010=m
> # CONFIG_MEDIA_TUNER_XC2028 is not set
> CONFIG_MEDIA_TUNER_XC5000=m
> CONFIG_MEDIA_TUNER_XC4000=m
> # CONFIG_MEDIA_TUNER_MXL5005S is not set
> CONFIG_MEDIA_TUNER_MXL5007T=m
> # CONFIG_MEDIA_TUNER_MC44S803 is not set
> # CONFIG_MEDIA_TUNER_MAX2165 is not set
> # CONFIG_MEDIA_TUNER_TDA18218 is not set
> CONFIG_MEDIA_TUNER_FC0011=m
> CONFIG_MEDIA_TUNER_FC0012=m
> CONFIG_MEDIA_TUNER_FC0013=m
> # CONFIG_MEDIA_TUNER_TDA18212 is not set
> CONFIG_MEDIA_TUNER_E4000=m
> # CONFIG_MEDIA_TUNER_FC2580 is not set
> # CONFIG_MEDIA_TUNER_TUA9001 is not set
>
> #
> # Customise DVB Frontends
> #
> # CONFIG_DVB_AU8522_V4L is not set
> CONFIG_DVB_TUNER_DIB0070=m
> CONFIG_DVB_TUNER_DIB0090=m
>
> #
> # Tools to develop new frontends
> #
> CONFIG_DVB_DUMMY_FE=m
>
> #
> # Graphics support
> #
> CONFIG_DRM=m
> # CONFIG_VGASTATE is not set
> # CONFIG_VIDEO_OUTPUT_CONTROL is not set
> # CONFIG_FB is not set
> # CONFIG_EXYNOS_VIDEO is not set
> CONFIG_BACKLIGHT_LCD_SUPPORT=y
> CONFIG_LCD_CLASS_DEVICE=m
> CONFIG_LCD_LTV350QV=m
> CONFIG_LCD_ILI9320=m
> CONFIG_LCD_TDO24M=m
> CONFIG_LCD_VGG2432A4=m
> CONFIG_LCD_PLATFORM=m
> CONFIG_LCD_S6E63M0=m
> CONFIG_LCD_LD9040=m
> CONFIG_LCD_AMS369FG06=m
> CONFIG_BACKLIGHT_CLASS_DEVICE=m
> CONFIG_BACKLIGHT_GENERIC=m
> CONFIG_BACKLIGHT_DA9052=m
> # CONFIG_BACKLIGHT_SAHARA is not set
> # CONFIG_BACKLIGHT_ADP8860 is not set
> CONFIG_BACKLIGHT_ADP8870=m
> # CONFIG_BACKLIGHT_PCF50633 is not set
> # CONFIG_BACKLIGHT_LM3630 is not set
> # CONFIG_BACKLIGHT_LM3639 is not set
> CONFIG_BACKLIGHT_LP855X=m
> CONFIG_BACKLIGHT_TPS65217=m
>
> #
> # Console display driver support
> #
> CONFIG_VGA_CONSOLE=y
> CONFIG_VGACON_SOFT_SCROLLBACK=y
> CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
> CONFIG_DUMMY_CONSOLE=y
> CONFIG_SOUND=m
> # CONFIG_SOUND_OSS_CORE is not set
> # CONFIG_SND is not set
> # CONFIG_SOUND_PRIME is not set
>
> #
> # HID support
> #
> # CONFIG_HID is not set
> # CONFIG_USB_ARCH_HAS_OHCI is not set
> # CONFIG_USB_ARCH_HAS_EHCI is not set
> # CONFIG_USB_ARCH_HAS_XHCI is not set
> CONFIG_USB_SUPPORT=y
> # CONFIG_USB_ARCH_HAS_HCD is not set
> CONFIG_USB_HCD_BCMA=m
> CONFIG_USB_HCD_SSB=m
>
> #
> # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
> #
> # CONFIG_USB_EZUSB_FX2 is not set
> # CONFIG_OMAP_USB2 is not set
> # CONFIG_USB_GADGET is not set
>
> #
> # OTG and related infrastructure
> #
> # CONFIG_MMC is not set
> CONFIG_MEMSTICK=m
> # CONFIG_MEMSTICK_DEBUG is not set
>
> #
> # MemoryStick drivers
> #
> CONFIG_MEMSTICK_UNSAFE_RESUME=y
> # CONFIG_MSPRO_BLOCK is not set
>
> #
> # MemoryStick Host Controller Drivers
> #
> CONFIG_NEW_LEDS=y
> CONFIG_LEDS_CLASS=m
>
> #
> # LED drivers
> #
> # CONFIG_LEDS_LM3530 is not set
> # CONFIG_LEDS_LM3642 is not set
> CONFIG_LEDS_PCA9532=m
> CONFIG_LEDS_LP3944=m
> # CONFIG_LEDS_LP5521 is not set
> # CONFIG_LEDS_LP5523 is not set
> CONFIG_LEDS_CLEVO_MAIL=m
> CONFIG_LEDS_PCA955X=m
> CONFIG_LEDS_PCA9633=m
> # CONFIG_LEDS_DA9052 is not set
> # CONFIG_LEDS_DAC124S085 is not set
> CONFIG_LEDS_REGULATOR=m
> CONFIG_LEDS_BD2802=m
> CONFIG_LEDS_MC13783=m
> CONFIG_LEDS_TCA6507=m
> CONFIG_LEDS_LM355x=m
> CONFIG_LEDS_OT200=m
> CONFIG_LEDS_BLINKM=m
> # CONFIG_LEDS_TRIGGERS is not set
>
> #
> # LED Triggers
> #
> # CONFIG_ACCESSIBILITY is not set
> CONFIG_EDAC=y
>
> #
> # Reporting subsystems
> #
> # CONFIG_EDAC_LEGACY_SYSFS is not set
> CONFIG_EDAC_DEBUG=y
> # CONFIG_EDAC_MM_EDAC is not set
> CONFIG_RTC_LIB=y
> CONFIG_RTC_CLASS=y
> CONFIG_RTC_HCTOSYS=y
> CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
> CONFIG_RTC_DEBUG=y
>
> #
> # RTC interfaces
> #
> CONFIG_RTC_INTF_SYSFS=y
> # CONFIG_RTC_INTF_PROC is not set
> # CONFIG_RTC_INTF_DEV is not set
> # CONFIG_RTC_DRV_TEST is not set
>
> #
> # I2C RTC drivers
> #
> CONFIG_RTC_DRV_DS1307=m
> CONFIG_RTC_DRV_DS1374=m
> CONFIG_RTC_DRV_DS1672=m
> CONFIG_RTC_DRV_DS3232=m
> # CONFIG_RTC_DRV_MAX6900 is not set
> CONFIG_RTC_DRV_RS5C372=m
> # CONFIG_RTC_DRV_ISL1208 is not set
> # CONFIG_RTC_DRV_ISL12022 is not set
> CONFIG_RTC_DRV_X1205=m
> # CONFIG_RTC_DRV_PCF8563 is not set
> # CONFIG_RTC_DRV_PCF8583 is not set
> CONFIG_RTC_DRV_M41T80=m
> CONFIG_RTC_DRV_M41T80_WDT=y
> # CONFIG_RTC_DRV_BQ32K is not set
> # CONFIG_RTC_DRV_S35390A is not set
> CONFIG_RTC_DRV_FM3130=m
> CONFIG_RTC_DRV_RX8581=m
> CONFIG_RTC_DRV_RX8025=m
> # CONFIG_RTC_DRV_EM3027 is not set
> # CONFIG_RTC_DRV_RV3029C2 is not set
>
> #
> # SPI RTC drivers
> #
> CONFIG_RTC_DRV_M41T93=m
> # CONFIG_RTC_DRV_M41T94 is not set
> CONFIG_RTC_DRV_DS1305=m
> CONFIG_RTC_DRV_DS1390=m
> # CONFIG_RTC_DRV_MAX6902 is not set
> CONFIG_RTC_DRV_R9701=m
> # CONFIG_RTC_DRV_RS5C348 is not set
> CONFIG_RTC_DRV_DS3234=m
> # CONFIG_RTC_DRV_PCF2123 is not set
>
> #
> # Platform RTC drivers
> #
> CONFIG_RTC_DRV_CMOS=m
> # CONFIG_RTC_DRV_DS1286 is not set
> # CONFIG_RTC_DRV_DS1511 is not set
> # CONFIG_RTC_DRV_DS1553 is not set
> CONFIG_RTC_DRV_DS1742=m
> CONFIG_RTC_DRV_DA9052=m
> # CONFIG_RTC_DRV_STK17TA8 is not set
> # CONFIG_RTC_DRV_M48T86 is not set
> # CONFIG_RTC_DRV_M48T35 is not set
> # CONFIG_RTC_DRV_M48T59 is not set
> CONFIG_RTC_DRV_MSM6242=m
> CONFIG_RTC_DRV_BQ4802=m
> CONFIG_RTC_DRV_RP5C01=m
> # CONFIG_RTC_DRV_V3020 is not set
> # CONFIG_RTC_DRV_DS2404 is not set
> CONFIG_RTC_DRV_PCF50633=m
>
> #
> # on-CPU RTC drivers
> #
> CONFIG_RTC_DRV_PCAP=m
> CONFIG_RTC_DRV_MC13XXX=m
> CONFIG_DMADEVICES=y
> # CONFIG_DMADEVICES_DEBUG is not set
>
> #
> # DMA Devices
> #
> CONFIG_TIMB_DMA=m
> CONFIG_DMA_ENGINE=y
>
> #
> # DMA Clients
> #
> CONFIG_ASYNC_TX_DMA=y
> CONFIG_DMATEST=m
> CONFIG_AUXDISPLAY=y
> CONFIG_UIO=m
> # CONFIG_UIO_PDRV is not set
> CONFIG_UIO_PDRV_GENIRQ=m
> CONFIG_VIRTIO=m
>
> #
> # Virtio drivers
> #
> CONFIG_VIRTIO_BALLOON=m
> CONFIG_VIRTIO_MMIO=m
> CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
>
> #
> # Microsoft Hyper-V guest support
> #
> CONFIG_STAGING=y
> # CONFIG_ECHO is not set
> CONFIG_COMEDI=m
> CONFIG_COMEDI_DEBUG=y
> CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
> CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
> CONFIG_COMEDI_MISC_DRIVERS=y
> CONFIG_COMEDI_KCOMEDILIB=m
> # CONFIG_COMEDI_BOND is not set
> CONFIG_COMEDI_TEST=m
> CONFIG_COMEDI_PARPORT=m
> CONFIG_COMEDI_SERIAL2002=m
> CONFIG_COMEDI_SKEL=m
> # CONFIG_COMEDI_8255 is not set
> CONFIG_COMEDI_FC=m
> # CONFIG_ZSMALLOC is not set
> # CONFIG_FT1000 is not set
>
> #
> # Speakup console speech
> #
> CONFIG_SPEAKUP=m
> # CONFIG_SPEAKUP_SYNTH_ACNTSA is not set
> # CONFIG_SPEAKUP_SYNTH_ACNTPC is not set
> CONFIG_SPEAKUP_SYNTH_APOLLO=m
> CONFIG_SPEAKUP_SYNTH_AUDPTR=m
> CONFIG_SPEAKUP_SYNTH_BNS=m
> # CONFIG_SPEAKUP_SYNTH_DECTLK is not set
> CONFIG_SPEAKUP_SYNTH_DECEXT=m
> CONFIG_SPEAKUP_SYNTH_DECPC=m
> # CONFIG_SPEAKUP_SYNTH_DTLK is not set
> CONFIG_SPEAKUP_SYNTH_KEYPC=m
> CONFIG_SPEAKUP_SYNTH_LTLK=m
> CONFIG_SPEAKUP_SYNTH_SOFT=m
> CONFIG_SPEAKUP_SYNTH_SPKOUT=m
> CONFIG_SPEAKUP_SYNTH_TXPRT=m
> CONFIG_SPEAKUP_SYNTH_DUMMY=m
> # CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
> # CONFIG_STAGING_MEDIA is not set
>
> #
> # Android
> #
> # CONFIG_ANDROID is not set
> CONFIG_PHONE=m
> CONFIG_IPACK_BUS=m
> # CONFIG_SERIAL_IPOCTAL is not set
> CONFIG_DGRP=m
> CONFIG_X86_PLATFORM_DEVICES=y
> CONFIG_SENSORS_HDAPS=m
> CONFIG_SAMSUNG_LAPTOP=m
> CONFIG_SAMSUNG_Q10=m
>
> #
> # Hardware Spinlock drivers
> #
> CONFIG_CLKEVT_I8253=y
> CONFIG_I8253_LOCK=y
> CONFIG_CLKBLD_I8253=y
> # CONFIG_IOMMU_SUPPORT is not set
>
> #
> # Remoteproc drivers (EXPERIMENTAL)
> #
> # CONFIG_STE_MODEM_RPROC is not set
>
> #
> # Rpmsg drivers (EXPERIMENTAL)
> #
> # CONFIG_VIRT_DRIVERS is not set
> # CONFIG_PM_DEVFREQ is not set
> CONFIG_EXTCON=y
>
> #
> # Extcon Device Drivers
> #
> CONFIG_EXTCON_ARIZONA=m
> # CONFIG_MEMORY is not set
> # CONFIG_IIO is not set
> # CONFIG_PWM is not set
>
> #
> # Firmware Drivers
> #
> CONFIG_EDD=m
> CONFIG_EDD_OFF=y
> CONFIG_FIRMWARE_MEMMAP=y
> CONFIG_DELL_RBU=m
> # CONFIG_DCDBAS is not set
> # CONFIG_DMIID is not set
> # CONFIG_DMI_SYSFS is not set
> # CONFIG_ISCSI_IBFT_FIND is not set
> # CONFIG_GOOGLE_FIRMWARE is not set
>
> #
> # File systems
> #
> CONFIG_DCACHE_WORD_ACCESS=y
> CONFIG_EXT2_FS=m
> CONFIG_EXT2_FS_XATTR=y
> CONFIG_EXT2_FS_POSIX_ACL=y
> CONFIG_EXT2_FS_SECURITY=y
> CONFIG_EXT2_FS_XIP=y
> CONFIG_EXT3_FS=m
> CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
> # CONFIG_EXT3_FS_XATTR is not set
> # CONFIG_EXT4_FS is not set
> CONFIG_FS_XIP=y
> CONFIG_JBD=m
> CONFIG_JBD_DEBUG=y
> CONFIG_FS_MBCACHE=m
> # CONFIG_REISERFS_FS is not set
> CONFIG_JFS_FS=m
> CONFIG_JFS_POSIX_ACL=y
> CONFIG_JFS_SECURITY=y
> # CONFIG_JFS_DEBUG is not set
> # CONFIG_JFS_STATISTICS is not set
> CONFIG_XFS_FS=m
> CONFIG_XFS_QUOTA=y
> CONFIG_XFS_POSIX_ACL=y
> CONFIG_XFS_RT=y
> # CONFIG_XFS_DEBUG is not set
> # CONFIG_GFS2_FS is not set
> CONFIG_BTRFS_FS=m
> # CONFIG_BTRFS_FS_POSIX_ACL is not set
> # CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
> CONFIG_NILFS2_FS=m
> CONFIG_FS_POSIX_ACL=y
> CONFIG_EXPORTFS=y
> CONFIG_FILE_LOCKING=y
> # CONFIG_FSNOTIFY is not set
> # CONFIG_DNOTIFY is not set
> # CONFIG_INOTIFY_USER is not set
> # CONFIG_FANOTIFY is not set
> CONFIG_QUOTA=y
> CONFIG_PRINT_QUOTA_WARNING=y
> # CONFIG_QUOTA_DEBUG is not set
> CONFIG_QFMT_V1=m
> # CONFIG_QFMT_V2 is not set
> CONFIG_QUOTACTL=y
> # CONFIG_AUTOFS4_FS is not set
> # CONFIG_FUSE_FS is not set
>
> #
> # Caches
> #
> # CONFIG_FSCACHE is not set
>
> #
> # CD-ROM/DVD Filesystems
> #
> # CONFIG_ISO9660_FS is not set
> CONFIG_UDF_FS=m
> CONFIG_UDF_NLS=y
>
> #
> # DOS/FAT/NT Filesystems
> #
> CONFIG_FAT_FS=m
> # CONFIG_MSDOS_FS is not set
> CONFIG_VFAT_FS=m
> CONFIG_FAT_DEFAULT_CODEPAGE=437
> CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
> CONFIG_NTFS_FS=m
> # CONFIG_NTFS_DEBUG is not set
> CONFIG_NTFS_RW=y
>
> #
> # Pseudo filesystems
> #
> CONFIG_PROC_FS=y
> # CONFIG_PROC_KCORE is not set
> CONFIG_PROC_VMCORE=y
> CONFIG_PROC_SYSCTL=y
> CONFIG_PROC_PAGE_MONITOR=y
> CONFIG_SYSFS=y
> CONFIG_TMPFS=y
> # CONFIG_TMPFS_POSIX_ACL is not set
> # CONFIG_TMPFS_XATTR is not set
> # CONFIG_HUGETLBFS is not set
> # CONFIG_HUGETLB_PAGE is not set
> CONFIG_CONFIGFS_FS=m
> CONFIG_MISC_FILESYSTEMS=y
> CONFIG_ADFS_FS=m
> # CONFIG_ADFS_FS_RW is not set
> CONFIG_AFFS_FS=m
> CONFIG_ECRYPT_FS=m
> # CONFIG_HFS_FS is not set
> # CONFIG_HFSPLUS_FS is not set
> # CONFIG_BEFS_FS is not set
> CONFIG_BFS_FS=m
> CONFIG_EFS_FS=m
> # CONFIG_JFFS2_FS is not set
> # CONFIG_LOGFS is not set
> CONFIG_CRAMFS=m
> CONFIG_SQUASHFS=m
> CONFIG_SQUASHFS_XATTR=y
> # CONFIG_SQUASHFS_ZLIB is not set
> CONFIG_SQUASHFS_LZO=y
> CONFIG_SQUASHFS_XZ=y
> CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y
> # CONFIG_SQUASHFS_EMBEDDED is not set
> CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
> # CONFIG_VXFS_FS is not set
> CONFIG_MINIX_FS=m
> CONFIG_OMFS_FS=m
> # CONFIG_HPFS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_QNX6FS_FS is not set
> # CONFIG_ROMFS_FS is not set
> # CONFIG_PSTORE is not set
> # CONFIG_SYSV_FS is not set
> # CONFIG_UFS_FS is not set
> CONFIG_NLS=y
> CONFIG_NLS_DEFAULT="iso8859-1"
> # CONFIG_NLS_CODEPAGE_437 is not set
> CONFIG_NLS_CODEPAGE_737=m
> CONFIG_NLS_CODEPAGE_775=m
> # CONFIG_NLS_CODEPAGE_850 is not set
> CONFIG_NLS_CODEPAGE_852=m
> # CONFIG_NLS_CODEPAGE_855 is not set
> # CONFIG_NLS_CODEPAGE_857 is not set
> CONFIG_NLS_CODEPAGE_860=m
> CONFIG_NLS_CODEPAGE_861=m
> # CONFIG_NLS_CODEPAGE_862 is not set
> CONFIG_NLS_CODEPAGE_863=m
> CONFIG_NLS_CODEPAGE_864=m
> CONFIG_NLS_CODEPAGE_865=m
> CONFIG_NLS_CODEPAGE_866=m
> CONFIG_NLS_CODEPAGE_869=m
> # CONFIG_NLS_CODEPAGE_936 is not set
> CONFIG_NLS_CODEPAGE_950=m
> CONFIG_NLS_CODEPAGE_932=m
> CONFIG_NLS_CODEPAGE_949=m
> # CONFIG_NLS_CODEPAGE_874 is not set
> CONFIG_NLS_ISO8859_8=m
> # CONFIG_NLS_CODEPAGE_1250 is not set
> # CONFIG_NLS_CODEPAGE_1251 is not set
> # CONFIG_NLS_ASCII is not set
> # CONFIG_NLS_ISO8859_1 is not set
> # CONFIG_NLS_ISO8859_2 is not set
> CONFIG_NLS_ISO8859_3=m
> CONFIG_NLS_ISO8859_4=m
> CONFIG_NLS_ISO8859_5=m
> # CONFIG_NLS_ISO8859_6 is not set
> # CONFIG_NLS_ISO8859_7 is not set
> # CONFIG_NLS_ISO8859_9 is not set
> # CONFIG_NLS_ISO8859_13 is not set
> CONFIG_NLS_ISO8859_14=m
> # CONFIG_NLS_ISO8859_15 is not set
> # CONFIG_NLS_KOI8_R is not set
> CONFIG_NLS_KOI8_U=m
> # CONFIG_NLS_MAC_ROMAN is not set
> # CONFIG_NLS_MAC_CELTIC is not set
> CONFIG_NLS_MAC_CENTEURO=m
> CONFIG_NLS_MAC_CROATIAN=m
> CONFIG_NLS_MAC_CYRILLIC=m
> CONFIG_NLS_MAC_GAELIC=m
> # CONFIG_NLS_MAC_GREEK is not set
> # CONFIG_NLS_MAC_ICELAND is not set
> # CONFIG_NLS_MAC_INUIT is not set
> # CONFIG_NLS_MAC_ROMANIAN is not set
> CONFIG_NLS_MAC_TURKISH=m
> # CONFIG_NLS_UTF8 is not set
>
> #
> # Kernel hacking
> #
> CONFIG_TRACE_IRQFLAGS_SUPPORT=y
> # CONFIG_PRINTK_TIME is not set
> CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
> # CONFIG_ENABLE_WARN_DEPRECATED is not set
> # CONFIG_ENABLE_MUST_CHECK is not set
> CONFIG_FRAME_WARN=2048
> CONFIG_MAGIC_SYSRQ=y
> CONFIG_STRIP_ASM_SYMS=y
> # CONFIG_UNUSED_SYMBOLS is not set
> CONFIG_DEBUG_FS=y
> # CONFIG_HEADERS_CHECK is not set
> # CONFIG_DEBUG_SECTION_MISMATCH is not set
> # CONFIG_DEBUG_KERNEL is not set
> # CONFIG_PANIC_ON_OOPS is not set
> CONFIG_PANIC_ON_OOPS_VALUE=0
> # CONFIG_SLUB_DEBUG_ON is not set
> # CONFIG_SLUB_STATS is not set
> CONFIG_HAVE_DEBUG_KMEMLEAK=y
> # CONFIG_SPARSE_RCU_POINTER is not set
> CONFIG_TRACE_IRQFLAGS=y
> CONFIG_STACKTRACE=y
> CONFIG_DEBUG_BUGVERBOSE=y
> CONFIG_DEBUG_MEMORY_INIT=y
> CONFIG_ARCH_WANT_FRAME_POINTERS=y
> CONFIG_FRAME_POINTER=y
> CONFIG_RCU_CPU_STALL_TIMEOUT=60
> # CONFIG_RCU_CPU_STALL_VERBOSE is not set
> # CONFIG_LKDTM is not set
> CONFIG_USER_STACKTRACE_SUPPORT=y
> CONFIG_NOP_TRACER=y
> CONFIG_HAVE_FUNCTION_TRACER=y
> CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
> CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
> CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
> CONFIG_HAVE_DYNAMIC_FTRACE=y
> CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
> CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
> CONFIG_HAVE_FENTRY=y
> CONFIG_HAVE_C_RECORDMCOUNT=y
> CONFIG_TRACER_MAX_TRACE=y
> CONFIG_TRACE_CLOCK=y
> CONFIG_RING_BUFFER=y
> CONFIG_EVENT_TRACING=y
> CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
> CONFIG_CONTEXT_SWITCH_TRACER=y
> CONFIG_RING_BUFFER_ALLOW_SWAP=y
> CONFIG_TRACING=y
> CONFIG_GENERIC_TRACER=y
> CONFIG_TRACING_SUPPORT=y
> CONFIG_FTRACE=y
> # CONFIG_FUNCTION_TRACER is not set
> CONFIG_IRQSOFF_TRACER=y
> # CONFIG_PREEMPT_TRACER is not set
> CONFIG_SCHED_TRACER=y
> CONFIG_FTRACE_SYSCALLS=y
> CONFIG_BRANCH_PROFILE_NONE=y
> # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
> # CONFIG_PROFILE_ALL_BRANCHES is not set
> # CONFIG_STACK_TRACER is not set
> # CONFIG_BLK_DEV_IO_TRACE is not set
> # CONFIG_UPROBE_EVENT is not set
> # CONFIG_PROBE_EVENTS is not set
> # CONFIG_FTRACE_STARTUP_TEST is not set
> CONFIG_RING_BUFFER_BENCHMARK=m
> # CONFIG_DYNAMIC_DEBUG is not set
> CONFIG_DMA_API_DEBUG=y
> CONFIG_ATOMIC64_SELFTEST=y
> CONFIG_SAMPLES=y
> # CONFIG_SAMPLE_TRACEPOINTS is not set
> # CONFIG_SAMPLE_TRACE_EVENTS is not set
> # CONFIG_SAMPLE_KOBJECT is not set
> CONFIG_SAMPLE_HW_BREAKPOINT=m
> # CONFIG_SAMPLE_KFIFO is not set
> CONFIG_HAVE_ARCH_KGDB=y
> CONFIG_HAVE_ARCH_KMEMCHECK=y
> # CONFIG_TEST_KSTRTOX is not set
> # CONFIG_STRICT_DEVMEM is not set
> CONFIG_X86_VERBOSE_BOOTUP=y
> CONFIG_EARLY_PRINTK=y
> CONFIG_DEBUG_SET_MODULE_RONX=y
> CONFIG_IOMMU_STRESS=y
> CONFIG_HAVE_MMIOTRACE_SUPPORT=y
> CONFIG_IO_DELAY_TYPE_0X80=0
> CONFIG_IO_DELAY_TYPE_0XED=1
> CONFIG_IO_DELAY_TYPE_UDELAY=2
> CONFIG_IO_DELAY_TYPE_NONE=3
> CONFIG_IO_DELAY_0X80=y
> # CONFIG_IO_DELAY_0XED is not set
> # CONFIG_IO_DELAY_UDELAY is not set
> # CONFIG_IO_DELAY_NONE is not set
> CONFIG_DEFAULT_IO_DELAY_TYPE=0
> # CONFIG_OPTIMIZE_INLINING is not set
>
> #
> # Security options
> #
> CONFIG_KEYS=y
> CONFIG_TRUSTED_KEYS=m
> # CONFIG_ENCRYPTED_KEYS is not set
> # CONFIG_KEYS_DEBUG_PROC_KEYS is not set
> CONFIG_SECURITY_DMESG_RESTRICT=y
> CONFIG_SECURITY=y
> CONFIG_SECURITYFS=y
> # CONFIG_SECURITY_NETWORK is not set
> CONFIG_SECURITY_PATH=y
> CONFIG_SECURITY_YAMA=y
> # CONFIG_SECURITY_YAMA_STACKED is not set
> # CONFIG_IMA is not set
> CONFIG_DEFAULT_SECURITY_YAMA=y
> # CONFIG_DEFAULT_SECURITY_DAC is not set
> CONFIG_DEFAULT_SECURITY="yama"
> CONFIG_CRYPTO=y
>
> #
> # Crypto core or helper
> #
> CONFIG_CRYPTO_ALGAPI=y
> CONFIG_CRYPTO_ALGAPI2=y
> CONFIG_CRYPTO_AEAD=m
> CONFIG_CRYPTO_AEAD2=y
> CONFIG_CRYPTO_BLKCIPHER=m
> CONFIG_CRYPTO_BLKCIPHER2=y
> CONFIG_CRYPTO_HASH=y
> CONFIG_CRYPTO_HASH2=y
> CONFIG_CRYPTO_RNG=m
> CONFIG_CRYPTO_RNG2=y
> CONFIG_CRYPTO_PCOMP=m
> CONFIG_CRYPTO_PCOMP2=y
> CONFIG_CRYPTO_MANAGER=m
> CONFIG_CRYPTO_MANAGER2=y
> CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
> CONFIG_CRYPTO_GF128MUL=m
> CONFIG_CRYPTO_NULL=m
> CONFIG_CRYPTO_PCRYPT=m
> CONFIG_CRYPTO_WORKQUEUE=y
> CONFIG_CRYPTO_CRYPTD=m
> CONFIG_CRYPTO_AUTHENC=m
> # CONFIG_CRYPTO_TEST is not set
> CONFIG_CRYPTO_ABLK_HELPER_X86=m
> CONFIG_CRYPTO_GLUE_HELPER_X86=m
>
> #
> # Authenticated Encryption with Associated Data
> #
> # CONFIG_CRYPTO_CCM is not set
> # CONFIG_CRYPTO_GCM is not set
> CONFIG_CRYPTO_SEQIV=m
>
> #
> # Block modes
> #
> CONFIG_CRYPTO_CBC=m
> CONFIG_CRYPTO_CTR=m
> CONFIG_CRYPTO_CTS=m
> CONFIG_CRYPTO_ECB=m
> CONFIG_CRYPTO_LRW=m
> # CONFIG_CRYPTO_PCBC is not set
> CONFIG_CRYPTO_XTS=m
>
> #
> # Hash modes
> #
> CONFIG_CRYPTO_HMAC=m
> CONFIG_CRYPTO_XCBC=m
> # CONFIG_CRYPTO_VMAC is not set
>
> #
> # Digest
> #
> CONFIG_CRYPTO_CRC32C=m
> # CONFIG_CRYPTO_CRC32C_INTEL is not set
> # CONFIG_CRYPTO_GHASH is not set
> # CONFIG_CRYPTO_MD4 is not set
> CONFIG_CRYPTO_MD5=m
> # CONFIG_CRYPTO_MICHAEL_MIC is not set
> # CONFIG_CRYPTO_RMD128 is not set
> # CONFIG_CRYPTO_RMD160 is not set
> CONFIG_CRYPTO_RMD256=m
> # CONFIG_CRYPTO_RMD320 is not set
> CONFIG_CRYPTO_SHA1=m
> # CONFIG_CRYPTO_SHA1_SSSE3 is not set
> CONFIG_CRYPTO_SHA256=m
> CONFIG_CRYPTO_SHA512=y
> CONFIG_CRYPTO_TGR192=m
> # CONFIG_CRYPTO_WP512 is not set
> CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
>
> #
> # Ciphers
> #
> CONFIG_CRYPTO_AES=m
> CONFIG_CRYPTO_AES_X86_64=m
> CONFIG_CRYPTO_AES_NI_INTEL=m
> CONFIG_CRYPTO_ANUBIS=m
> # CONFIG_CRYPTO_ARC4 is not set
> # CONFIG_CRYPTO_BLOWFISH is not set
> CONFIG_CRYPTO_BLOWFISH_COMMON=m
> CONFIG_CRYPTO_BLOWFISH_X86_64=m
> CONFIG_CRYPTO_CAMELLIA=m
> CONFIG_CRYPTO_CAMELLIA_X86_64=m
> # CONFIG_CRYPTO_CAST5 is not set
> # CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
> CONFIG_CRYPTO_CAST6=m
> CONFIG_CRYPTO_CAST6_AVX_X86_64=m
> # CONFIG_CRYPTO_DES is not set
> CONFIG_CRYPTO_FCRYPT=m
> CONFIG_CRYPTO_KHAZAD=m
> # CONFIG_CRYPTO_SALSA20 is not set
> # CONFIG_CRYPTO_SALSA20_X86_64 is not set
> CONFIG_CRYPTO_SEED=m
> CONFIG_CRYPTO_SERPENT=m
> # CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
> # CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
> # CONFIG_CRYPTO_TEA is not set
> # CONFIG_CRYPTO_TWOFISH is not set
> # CONFIG_CRYPTO_TWOFISH_X86_64 is not set
> # CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
> # CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set
>
> #
> # Compression
> #
> # CONFIG_CRYPTO_DEFLATE is not set
> CONFIG_CRYPTO_ZLIB=m
> CONFIG_CRYPTO_LZO=m
>
> #
> # Random Number Generation
> #
> CONFIG_CRYPTO_ANSI_CPRNG=m
> # CONFIG_CRYPTO_HW is not set
> CONFIG_ASYMMETRIC_KEY_TYPE=y
> CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
> CONFIG_PUBLIC_KEY_ALGO_RSA=y
> CONFIG_X509_CERTIFICATE_PARSER=y
> CONFIG_HAVE_KVM=y
> CONFIG_VIRTUALIZATION=y
> CONFIG_BINARY_PRINTF=y
>
> #
> # Library routines
> #
> CONFIG_BITREVERSE=m
> CONFIG_GENERIC_STRNCPY_FROM_USER=y
> CONFIG_GENERIC_STRNLEN_USER=y
> CONFIG_GENERIC_FIND_FIRST_BIT=y
> CONFIG_GENERIC_PCI_IOMAP=y
> CONFIG_GENERIC_IOMAP=y
> CONFIG_GENERIC_IO=y
> # CONFIG_CRC_CCITT is not set
> CONFIG_CRC16=m
> CONFIG_CRC_T10DIF=m
> CONFIG_CRC_ITU_T=m
> CONFIG_CRC32=m
> CONFIG_CRC32_SELFTEST=y
> # CONFIG_CRC32_SLICEBY8 is not set
> # CONFIG_CRC32_SLICEBY4 is not set
> # CONFIG_CRC32_SARWATE is not set
> CONFIG_CRC32_BIT=y
> # CONFIG_CRC7 is not set
> CONFIG_LIBCRC32C=m
> CONFIG_CRC8=m
> CONFIG_ZLIB_INFLATE=m
> CONFIG_ZLIB_DEFLATE=m
> CONFIG_LZO_COMPRESS=y
> CONFIG_LZO_DECOMPRESS=y
> CONFIG_XZ_DEC=m
> CONFIG_XZ_DEC_X86=y
> CONFIG_XZ_DEC_POWERPC=y
> CONFIG_XZ_DEC_IA64=y
> CONFIG_XZ_DEC_ARM=y
> CONFIG_XZ_DEC_ARMTHUMB=y
> CONFIG_XZ_DEC_SPARC=y
> CONFIG_XZ_DEC_BCJ=y
> CONFIG_XZ_DEC_TEST=m
> CONFIG_HAS_IOMEM=y
> CONFIG_HAS_IOPORT=y
> CONFIG_HAS_DMA=y
> CONFIG_NLATTR=y
> CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
> # CONFIG_AVERAGE is not set
> CONFIG_CLZ_TAB=y
> CONFIG_CORDIC=m
> CONFIG_DDR=y
> CONFIG_MPILIB=y
> CONFIG_OID_REGISTRY=y
>
>
^ permalink raw reply [flat|nested] 45+ messages in thread
* Kernel panic
@ 2012-12-02 17:30 Stefan Beller
2012-12-02 17:51 ` Stefan Beller
0 siblings, 1 reply; 45+ messages in thread
From: Stefan Beller @ 2012-12-02 17:30 UTC (permalink / raw)
To: linux-kernel
Hello,
so I tested v3.7-rc7-163-g3c46f3d and got a kernel panic.
Usually I am running Ubuntu on my Dell Latitutde E6520,
which usually works fine except some sound issues.
I did this:
git clone https://github.com/torvalds/linux.git
cd linux
make deb-pkg
cd ..
dpkg -i linux-headers-3.7.0-rc7+_3.7.0-rc7+-3_amd64.deb
dpkg -i linux-image-3.7.0-rc7+_3.7.0-rc7+-3_amd64.deb
dpkg -i linux-libc-dev_3.7.0-rc7+-3_amd64.deb
Rebooting yields a panic,
see panic stack trace and .config below
How would I help further fixing this issue?
---------------------------------
the screen reads:
---------------------------------
early console in decompress_kernel
Decompressing Linux... Parsing ELF... done.
Booting the kernel.
drivers/rtc/hctosyys.c: unable to open rtc device (rtc0)
Kernel panic - not syncing: VFS Unable to mount root fs on unknown-block(0,0)
Pid: 1, com: swapper/0 Not tainted 3.7.0-rc7+ #3
Call Trace:
[<ffffffff8127a2c3>] panic+0x11a/0x2b3
[<ffffffff8147d42e>] mount_block_root+0x375/0x39a
[<ffffffff8147d4bf>] mount_root+0x6c/0x77
[<ffffffff8147d68b>] prepare_namespace+0x1c1/0x203
[<ffffffff8106aeb3>] ? release_tgcred.isra.8+0x3c/0x3c
[<ffffffff812750b5>] kernel_init+0x2ae/0x433
[<ffffffff8147c5f8>] ? loglevel+0x46/0x46
[<ffffffff81274e07>] ? rest_init+0xd3/0xd3
[<ffffffff812832bc>] ret_from_fork+0x7c/0xb0
[<ffffffff81274e07>] ? rest_init+0xd3/0xd3
---------------------------------
.config
---------------------------------
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 3.7.0-rc6 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_FHANDLE=y
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
#
# CPU/Task time and stats accounting
#
# CONFIG_TICK_CPU_ACCOUNTING is not set
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_USER_QS is not set
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_LEAF=16
CONFIG_RCU_FANOUT_EXACT=y
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_RCU_BOOST=y
CONFIG_RCU_BOOST_PRIO=1
CONFIG_RCU_BOOST_DELAY=500
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_CGROUPS is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
CONFIG_IPC_NS=y
CONFIG_PID_NS=y
# CONFIG_SCHED_AUTOGROUP is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EXPERT is not set
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_KALLSYMS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_GENERIC_KERNEL_THREAD=y
CONFIG_GENERIC_KERNEL_EXECVE=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_RCU_USER_QS=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_MODULES_USE_ELF_RELA=y
#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
CONFIG_GCOV_PROFILE_ALL=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_MODULE_SIG=y
CONFIG_MODULE_SIG_FORCE=y
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set
# CONFIG_MODULE_SIG_SHA256 is not set
CONFIG_MODULE_SIG_SHA384=y
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=m
# CONFIG_IOSCHED_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_EXTENDED_PLATFORM=y
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_PARAVIRT_GUEST=y
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
# CONFIG_XEN is not set
# CONFIG_XEN_PRIVILEGED_GUEST is not set
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
# CONFIG_X86_MCE_AMD is not set
# CONFIG_X86_MCE_INJECT is not set
CONFIG_I8K=m
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
# CONFIG_HOTPLUG_CPU is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
# CONFIG_CMDLINE_OVERRIDE is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_SFI=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
CONFIG_CPU_FREQ_STAT=m
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# x86 CPU frequency scaling drivers
#
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
# CONFIG_CPU_IDLE is not set
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=m
#
# Bus options (PCI etc.)
#
# CONFIG_PCI is not set
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
# CONFIG_PCCARD is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
# CONFIG_IA32_EMULATION is not set
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_X86_DEV_DMA_OPS=y
# CONFIG_NET is not set
CONFIG_HAVE_BPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
#
# Bus devices
#
CONFIG_OMAP_OCP2SCP=m
CONFIG_MTD=m
CONFIG_MTD_TESTS=m
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
# CONFIG_MTD_CHAR is not set
CONFIG_HAVE_MTD_OTP=y
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
CONFIG_RFD_FTL=m
# CONFIG_SSFDC is not set
CONFIG_SM_FTL=m
# CONFIG_MTD_OOPS is not set
CONFIG_MTD_SWAP=m
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_GEOMETRY is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_OTP=y
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
# CONFIG_MTD_ROM is not set
CONFIG_MTD_ABSENT=m
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_COMPAT=y
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
# CONFIG_MTD_SBC_GXX is not set
# CONFIG_MTD_AMD76XROM is not set
CONFIG_MTD_ICHXROM=m
# CONFIG_MTD_NETtel is not set
CONFIG_MTD_L440GX=m
CONFIG_MTD_PLATRAM=m
# CONFIG_MTD_LATCH_ADDR is not set
#
# Self-contained MTD device drivers
#
CONFIG_MTD_DATAFLASH=m
CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
# CONFIG_MTD_DATAFLASH_OTP is not set
CONFIG_MTD_M25P80=m
CONFIG_M25PXX_USE_FAST_READ=y
CONFIG_MTD_SST25L=m
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
CONFIG_MTD_NAND_ECC=m
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
CONFIG_AD525X_DPOT=m
# CONFIG_AD525X_DPOT_I2C is not set
# CONFIG_AD525X_DPOT_SPI is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
CONFIG_SENSORS_APDS990X=m
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
CONFIG_TI_DAC7512=m
# CONFIG_VMWARE_BALLOON is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_BMP085_SPI is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
CONFIG_C2PORT=m
# CONFIG_C2PORT_DURAMAR_2150 is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_AT25=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_93XX46 is not set
#
# Texas Instruments shared transport line discipline
#
CONFIG_SENSORS_LIS3_SPI=m
# CONFIG_SENSORS_LIS3_I2C is not set
#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=m
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
CONFIG_INPUT_MATRIXKMAP=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5588=m
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
CONFIG_KEYBOARD_LM8323=m
CONFIG_KEYBOARD_LM8333=m
CONFIG_KEYBOARD_MAX7359=m
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_STMPE=m
CONFIG_KEYBOARD_OMAP4=m
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
CONFIG_JOYSTICK_GRIP=m
# CONFIG_JOYSTICK_GRIP_MP is not set
CONFIG_JOYSTICK_GUILLEMOT=m
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
# CONFIG_JOYSTICK_STINGER is not set
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
# CONFIG_JOYSTICK_AS5011 is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
CONFIG_INPUT_TABLET=y
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_SERIO_ALTERA_PS2 is not set
CONFIG_SERIO_PS2MULT=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
# CONFIG_GAMEPORT_L4 is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_N_HDLC is not set
CONFIG_TRACE_ROUTER=m
CONFIG_TRACE_SINK=m
# CONFIG_DEVKMEM is not set
# CONFIG_STALDRV is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_SCCNXP is not set
CONFIG_SERIAL_TIMBERDALE=m
CONFIG_SERIAL_ALTERA_JTAGUART=m
CONFIG_SERIAL_ALTERA_UART=m
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
# CONFIG_SERIAL_XILINX_PS_UART is not set
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
# CONFIG_IPMI_WATCHDOG is not set
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_HW_RANDOM_VIRTIO=m
# CONFIG_HW_RANDOM_TPM is not set
CONFIG_NVRAM=m
CONFIG_R3964=m
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=m
# CONFIG_TCG_TIS is not set
CONFIG_TCG_TIS_I2C_INFINEON=m
# CONFIG_TCG_NSC is not set
# CONFIG_TCG_ATMEL is not set
# CONFIG_TELCLOCK is not set
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_OCORES=m
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
CONFIG_I2C_XILINX=m
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_TAOS_EVM is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
CONFIG_I2C_DEBUG_CORE=y
# CONFIG_I2C_DEBUG_ALGO is not set
CONFIG_I2C_DEBUG_BUS=y
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
CONFIG_SPI_BITBANG=m
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_XCOMM is not set
CONFIG_SPI_XILINX=m
CONFIG_SPI_DESIGNWARE=m
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
CONFIG_SPI_TLE62X0=m
CONFIG_HSI=m
CONFIG_HSI_BOARDINFO=y
#
# HSI clients
#
# CONFIG_HSI_CHAR is not set
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
#
# PTP clock support
#
#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
CONFIG_W1=m
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_DS2482 is not set
CONFIG_W1_MASTER_DS1WM=m
CONFIG_HDQ_MASTER_OMAP=m
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
# CONFIG_W1_SLAVE_SMEM is not set
CONFIG_W1_SLAVE_DS2408=m
CONFIG_W1_SLAVE_DS2423=m
# CONFIG_W1_SLAVE_DS2431 is not set
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
# CONFIG_W1_SLAVE_DS2760 is not set
CONFIG_W1_SLAVE_DS2780=m
# CONFIG_W1_SLAVE_DS2781 is not set
CONFIG_W1_SLAVE_DS28E04=m
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
CONFIG_BATTERY_DS2780=m
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
CONFIG_BATTERY_SBS=m
CONFIG_BATTERY_BQ27x00=m
# CONFIG_BATTERY_BQ27X00_I2C is not set
CONFIG_BATTERY_BQ27X00_PLATFORM=y
# CONFIG_BATTERY_DA9052 is not set
CONFIG_BATTERY_MAX17040=m
CONFIG_BATTERY_MAX17042=m
CONFIG_CHARGER_PCF50633=m
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
CONFIG_CHARGER_MANAGER=y
# CONFIG_CHARGER_SMB347 is not set
CONFIG_POWER_AVS=y
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7314=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADCXX=m
# CONFIG_SENSORS_ADM1021 is not set
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7410=m
# CONFIG_SENSORS_ADT7411 is not set
CONFIG_SENSORS_ADT7462=m
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ASB100 is not set
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS620=m
# CONFIG_SENSORS_DS1621 is not set
CONFIG_SENSORS_DA9052_ADC=m
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_GL518SM=m
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_HIH6130=m
CONFIG_SENSORS_IBMAEM=m
# CONFIG_SENSORS_IBMPEX is not set
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_JC42=m
CONFIG_SENSORS_LINEAGE=m
CONFIG_SENSORS_LM63=m
# CONFIG_SENSORS_LM70 is not set
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
# CONFIG_SENSORS_LM77 is not set
CONFIG_SENSORS_LM78=m
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
# CONFIG_SENSORS_LM92 is not set
CONFIG_SENSORS_LM93=m
# CONFIG_SENSORS_LTC4151 is not set
CONFIG_SENSORS_LTC4215=m
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LTC4261=m
# CONFIG_SENSORS_LM95241 is not set
CONFIG_SENSORS_LM95245=m
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
CONFIG_SENSORS_MAX6639=m
# CONFIG_SENSORS_MAX6642 is not set
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MCP3021=m
# CONFIG_SENSORS_NTC_THERMISTOR is not set
CONFIG_SENSORS_PC87360=m
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SMM665 is not set
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
# CONFIG_SENSORS_SMSC47M192 is not set
CONFIG_SENSORS_SMSC47B397=m
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
CONFIG_SENSORS_ADS1015=m
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
CONFIG_SENSORS_AMC6821=m
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
CONFIG_SENSORS_VIA_CPUTEMP=m
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
CONFIG_SENSORS_W83791D=m
# CONFIG_SENSORS_W83792D is not set
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_SENSORS_MC13783_ADC is not set
CONFIG_THERMAL=m
CONFIG_THERMAL_HWMON=y
# CONFIG_CPU_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_DA9052_WATCHDOG=m
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
CONFIG_F71808E_WDT=m
CONFIG_SC520_WDT=m
# CONFIG_SBC_FITPC2_WATCHDOG is not set
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_IT8712F_WDT=m
# CONFIG_IT87_WDT is not set
# CONFIG_SC1200_WDT is not set
CONFIG_PC87413_WDT=m
CONFIG_60XX_WDT=m
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
CONFIG_SMSC37B787_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
# CONFIG_W83697UG_WDT is not set
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_DEBUG=y
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
CONFIG_BCMA=m
CONFIG_BCMA_DRIVER_GMAC_CMN=y
# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_SM501=m
CONFIG_HTC_PASIC3=m
# CONFIG_MFD_LM3533 is not set
CONFIG_TPS6105X=m
CONFIG_TPS6507X=m
CONFIG_MFD_TPS65217=m
CONFIG_MFD_STMPE=y
#
# STMPE Interface Drivers
#
CONFIG_STMPE_SPI=y
# CONFIG_MFD_TMIO is not set
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_SPI=y
CONFIG_MFD_ARIZONA=y
# CONFIG_MFD_ARIZONA_I2C is not set
CONFIG_MFD_ARIZONA_SPI=m
CONFIG_MFD_WM5102=y
# CONFIG_MFD_WM5110 is not set
# CONFIG_MFD_WM831X_SPI is not set
CONFIG_MFD_PCF50633=m
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=m
CONFIG_MFD_MC13783=m
CONFIG_MFD_MC13XXX=m
CONFIG_MFD_MC13XXX_SPI=m
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_ABX500_CORE is not set
CONFIG_EZX_PCAP=y
CONFIG_MFD_WL1273_CORE=m
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_DUMMY is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=m
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=m
CONFIG_REGULATOR_AD5398=m
CONFIG_REGULATOR_ARIZONA=m
CONFIG_REGULATOR_DA9052=m
CONFIG_REGULATOR_FAN53555=m
CONFIG_REGULATOR_MC13XXX_CORE=m
CONFIG_REGULATOR_MC13783=m
# CONFIG_REGULATOR_MC13892 is not set
CONFIG_REGULATOR_ISL6271A=m
CONFIG_REGULATOR_MAX1586=m
# CONFIG_REGULATOR_MAX8649 is not set
CONFIG_REGULATOR_MAX8660=m
CONFIG_REGULATOR_MAX8952=m
# CONFIG_REGULATOR_PCAP is not set
CONFIG_REGULATOR_LP3971=m
# CONFIG_REGULATOR_LP3972 is not set
# CONFIG_REGULATOR_PCF50633 is not set
# CONFIG_REGULATOR_TPS6105X is not set
CONFIG_REGULATOR_TPS62360=m
# CONFIG_REGULATOR_TPS65023 is not set
CONFIG_REGULATOR_TPS6507X=m
# CONFIG_REGULATOR_TPS65217 is not set
# CONFIG_REGULATOR_TPS6524X is not set
CONFIG_MEDIA_SUPPORT=m
#
# Multimedia core support
#
# CONFIG_MEDIA_CAMERA_SUPPORT is not set
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
CONFIG_MEDIA_RADIO_SUPPORT=y
# CONFIG_MEDIA_RC_SUPPORT is not set
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_ADV_DEBUG=y
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
#
# Media drivers
#
#
# Supported MMC/SDIO adapters
#
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_SI470X=y
CONFIG_I2C_SI470X=m
CONFIG_I2C_SI4713=m
CONFIG_RADIO_SI4713=m
# CONFIG_RADIO_TEA5764 is not set
CONFIG_RADIO_SAA7706H=m
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_RADIO_WL1273 is not set
#
# Texas Instruments WL128x FM driver (ST based)
#
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#
#
# Encoders, decoders, sensors and other helper chips
#
#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=m
# CONFIG_VIDEO_TDA7432 is not set
# CONFIG_VIDEO_TDA9840 is not set
# CONFIG_VIDEO_TEA6415C is not set
# CONFIG_VIDEO_TEA6420 is not set
# CONFIG_VIDEO_MSP3400 is not set
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_TLV320AIC23B=m
# CONFIG_VIDEO_WM8775 is not set
CONFIG_VIDEO_WM8739=m
# CONFIG_VIDEO_VP27SMPX is not set
#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m
#
# Video decoders
#
CONFIG_VIDEO_ADV7180=m
# CONFIG_VIDEO_ADV7183 is not set
# CONFIG_VIDEO_BT819 is not set
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_BT866=m
CONFIG_VIDEO_KS0127=m
# CONFIG_VIDEO_SAA7110 is not set
# CONFIG_VIDEO_SAA711X is not set
# CONFIG_VIDEO_SAA7191 is not set
# CONFIG_VIDEO_TVP514X is not set
# CONFIG_VIDEO_TVP5150 is not set
CONFIG_VIDEO_TVP7002=m
CONFIG_VIDEO_VPX3220=m
#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m
#
# MPEG video encoders
#
CONFIG_VIDEO_CX2341X=m
#
# Video encoders
#
# CONFIG_VIDEO_SAA7127 is not set
# CONFIG_VIDEO_SAA7185 is not set
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
CONFIG_VIDEO_ADV7343=m
CONFIG_VIDEO_ADV7393=m
# CONFIG_VIDEO_AK881X is not set
#
# Camera sensor devices
#
#
# Flash devices
#
#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
# CONFIG_VIDEO_UPD64083 is not set
#
# Miscelaneous helper chips
#
# CONFIG_VIDEO_THS7303 is not set
# CONFIG_VIDEO_M52790 is not set
#
# Sensors used on soc_camera driver
#
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=m
#
# Customize TV tuners
#
# CONFIG_MEDIA_TUNER_SIMPLE is not set
# CONFIG_MEDIA_TUNER_TDA8290 is not set
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
# CONFIG_MEDIA_TUNER_MT2063 is not set
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
# CONFIG_MEDIA_TUNER_XC2028 is not set
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
# CONFIG_MEDIA_TUNER_MXL5005S is not set
CONFIG_MEDIA_TUNER_MXL5007T=m
# CONFIG_MEDIA_TUNER_MC44S803 is not set
# CONFIG_MEDIA_TUNER_MAX2165 is not set
# CONFIG_MEDIA_TUNER_TDA18218 is not set
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
# CONFIG_MEDIA_TUNER_TDA18212 is not set
CONFIG_MEDIA_TUNER_E4000=m
# CONFIG_MEDIA_TUNER_FC2580 is not set
# CONFIG_MEDIA_TUNER_TUA9001 is not set
#
# Customise DVB Frontends
#
# CONFIG_DVB_AU8522_V4L is not set
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m
#
# Tools to develop new frontends
#
CONFIG_DVB_DUMMY_FE=m
#
# Graphics support
#
CONFIG_DRM=m
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_EXYNOS_VIDEO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_LTV350QV=m
CONFIG_LCD_ILI9320=m
CONFIG_LCD_TDO24M=m
CONFIG_LCD_VGG2432A4=m
CONFIG_LCD_PLATFORM=m
CONFIG_LCD_S6E63M0=m
CONFIG_LCD_LD9040=m
CONFIG_LCD_AMS369FG06=m
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_GENERIC=m
CONFIG_BACKLIGHT_DA9052=m
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
CONFIG_BACKLIGHT_ADP8870=m
# CONFIG_BACKLIGHT_PCF50633 is not set
# CONFIG_BACKLIGHT_LM3630 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
CONFIG_BACKLIGHT_LP855X=m
CONFIG_BACKLIGHT_TPS65217=m
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_SOUND=m
# CONFIG_SOUND_OSS_CORE is not set
# CONFIG_SND is not set
# CONFIG_SOUND_PRIME is not set
#
# HID support
#
# CONFIG_HID is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB_ARCH_HAS_XHCI is not set
CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
CONFIG_USB_HCD_BCMA=m
CONFIG_USB_HCD_SSB=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_OMAP_USB2 is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_MMC is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
# CONFIG_MSPRO_BLOCK is not set
#
# MemoryStick Host Controller Drivers
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
CONFIG_LEDS_PCA9532=m
CONFIG_LEDS_LP3944=m
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
CONFIG_LEDS_CLEVO_MAIL=m
CONFIG_LEDS_PCA955X=m
CONFIG_LEDS_PCA9633=m
# CONFIG_LEDS_DA9052 is not set
# CONFIG_LEDS_DAC124S085 is not set
CONFIG_LEDS_REGULATOR=m
CONFIG_LEDS_BD2802=m
CONFIG_LEDS_MC13783=m
CONFIG_LEDS_TCA6507=m
CONFIG_LEDS_LM355x=m
CONFIG_LEDS_OT200=m
CONFIG_LEDS_BLINKM=m
# CONFIG_LEDS_TRIGGERS is not set
#
# LED Triggers
#
# CONFIG_ACCESSIBILITY is not set
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_LEGACY_SYSFS is not set
CONFIG_EDAC_DEBUG=y
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_DEBUG=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
# CONFIG_RTC_INTF_PROC is not set
# CONFIG_RTC_INTF_DEV is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS3232=m
# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_RS5C372=m
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
CONFIG_RTC_DRV_X1205=m
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T93=m
# CONFIG_RTC_DRV_M41T94 is not set
CONFIG_RTC_DRV_DS1305=m
CONFIG_RTC_DRV_DS1390=m
# CONFIG_RTC_DRV_MAX6902 is not set
CONFIG_RTC_DRV_R9701=m
# CONFIG_RTC_DRV_RS5C348 is not set
CONFIG_RTC_DRV_DS3234=m
# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DA9052=m
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_DS2404 is not set
CONFIG_RTC_DRV_PCF50633=m
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_PCAP=m
CONFIG_RTC_DRV_MC13XXX=m
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_TIMB_DMA=m
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=m
CONFIG_AUXDISPLAY=y
CONFIG_UIO=m
# CONFIG_UIO_PDRV is not set
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_VIRTIO=m
#
# Virtio drivers
#
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_MMIO=m
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
#
# Microsoft Hyper-V guest support
#
CONFIG_STAGING=y
# CONFIG_ECHO is not set
CONFIG_COMEDI=m
CONFIG_COMEDI_DEBUG=y
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
CONFIG_COMEDI_MISC_DRIVERS=y
CONFIG_COMEDI_KCOMEDILIB=m
# CONFIG_COMEDI_BOND is not set
CONFIG_COMEDI_TEST=m
CONFIG_COMEDI_PARPORT=m
CONFIG_COMEDI_SERIAL2002=m
CONFIG_COMEDI_SKEL=m
# CONFIG_COMEDI_8255 is not set
CONFIG_COMEDI_FC=m
# CONFIG_ZSMALLOC is not set
# CONFIG_FT1000 is not set
#
# Speakup console speech
#
CONFIG_SPEAKUP=m
# CONFIG_SPEAKUP_SYNTH_ACNTSA is not set
# CONFIG_SPEAKUP_SYNTH_ACNTPC is not set
CONFIG_SPEAKUP_SYNTH_APOLLO=m
CONFIG_SPEAKUP_SYNTH_AUDPTR=m
CONFIG_SPEAKUP_SYNTH_BNS=m
# CONFIG_SPEAKUP_SYNTH_DECTLK is not set
CONFIG_SPEAKUP_SYNTH_DECEXT=m
CONFIG_SPEAKUP_SYNTH_DECPC=m
# CONFIG_SPEAKUP_SYNTH_DTLK is not set
CONFIG_SPEAKUP_SYNTH_KEYPC=m
CONFIG_SPEAKUP_SYNTH_LTLK=m
CONFIG_SPEAKUP_SYNTH_SOFT=m
CONFIG_SPEAKUP_SYNTH_SPKOUT=m
CONFIG_SPEAKUP_SYNTH_TXPRT=m
CONFIG_SPEAKUP_SYNTH_DUMMY=m
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
# CONFIG_STAGING_MEDIA is not set
#
# Android
#
# CONFIG_ANDROID is not set
CONFIG_PHONE=m
CONFIG_IPACK_BUS=m
# CONFIG_SERIAL_IPOCTAL is not set
CONFIG_DGRP=m
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_SENSORS_HDAPS=m
CONFIG_SAMSUNG_LAPTOP=m
CONFIG_SAMSUNG_Q10=m
#
# Hardware Spinlock drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_IOMMU_SUPPORT is not set
#
# Remoteproc drivers (EXPERIMENTAL)
#
# CONFIG_STE_MODEM_RPROC is not set
#
# Rpmsg drivers (EXPERIMENTAL)
#
# CONFIG_VIRT_DRIVERS is not set
# CONFIG_PM_DEVFREQ is not set
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
CONFIG_EXTCON_ARIZONA=m
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_PWM is not set
#
# Firmware Drivers
#
CONFIG_EDD=m
CONFIG_EDD_OFF=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=m
# CONFIG_DCDBAS is not set
# CONFIG_DMIID is not set
# CONFIG_DMI_SYSFS is not set
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=m
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_FS_XIP=y
CONFIG_JBD=m
CONFIG_JBD_DEBUG=y
CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
CONFIG_BTRFS_FS=m
# CONFIG_BTRFS_FS_POSIX_ACL is not set
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
CONFIG_NILFS2_FS=m
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
# CONFIG_FSNOTIFY is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QFMT_V1=m
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
# CONFIG_JFFS2_FS is not set
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_XATTR=y
# CONFIG_SQUASHFS_ZLIB is not set
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=m
CONFIG_OMFS_FS=m
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
# CONFIG_NLS_CODEPAGE_936 is not set
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=m
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
CONFIG_NLS_ISO8859_14=m
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
CONFIG_NLS_KOI8_U=m
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
CONFIG_NLS_MAC_TURKISH=m
# CONFIG_NLS_UTF8 is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_SPARSE_RCU_POINTER is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_CPU_STALL_VERBOSE is not set
# CONFIG_LKDTM is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
CONFIG_IRQSOFF_TRACER=y
# CONFIG_PREEMPT_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_UPROBE_EVENT is not set
# CONFIG_PROBE_EVENTS is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_DMA_API_DEBUG=y
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_TRACEPOINTS is not set
# CONFIG_SAMPLE_TRACE_EVENTS is not set
# CONFIG_SAMPLE_KOBJECT is not set
CONFIG_SAMPLE_HW_BREAKPOINT=m
# CONFIG_SAMPLE_KFIFO is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_SET_MODULE_RONX=y
CONFIG_IOMMU_STRESS=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_OPTIMIZE_INLINING is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_TRUSTED_KEYS=m
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_PATH=y
CONFIG_SECURITY_YAMA=y
# CONFIG_SECURITY_YAMA_STACKED is not set
# CONFIG_IMA is not set
CONFIG_DEFAULT_SECURITY_YAMA=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="yama"
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_ABLK_HELPER_X86=m
CONFIG_CRYPTO_GLUE_HELPER_X86=m
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=m
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=m
CONFIG_CRYPTO_XCBC=m
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_RMD256=m
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=m
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_AES_NI_INTEL=m
CONFIG_CRYPTO_ANUBIS=m
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_BLOWFISH_X86_64=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAMELLIA_X86_64=m
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_CAST6_AVX_X86_64=m
# CONFIG_CRYPTO_DES is not set
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
# CONFIG_CRYPTO_HW is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_PUBLIC_KEY_ALGO_RSA=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=m
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=m
CONFIG_CRC32_SELFTEST=y
# CONFIG_CRC32_SLICEBY8 is not set
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
CONFIG_CRC32_BIT=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_CRC8=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=m
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
# CONFIG_AVERAGE is not set
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=m
CONFIG_DDR=y
CONFIG_MPILIB=y
CONFIG_OID_REGISTRY=y
^ permalink raw reply [flat|nested] 45+ messages in thread
* Kernel panic
[not found] <201201191202.q0JC243u029201@curly.dor.state.ma.us>
@ 2012-01-19 15:26 ` Ron Murray
0 siblings, 0 replies; 45+ messages in thread
From: Ron Murray @ 2012-01-19 15:26 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 6279 bytes --]
System Events
=-=-=-=-=-=-=
Jan 19 06:43:22 curly kernel: BUG: unable to handle kernel NULL pointer
dereference at 0000000000000028
Jan 19 06:43:22 curly kernel: IP: [<ffffffff810ca594>]
dentry_lru_prune+0x22/0x49
Jan 19 06:43:22 curly kernel: PGD 79079067 PUD 337e1067 PMD 0
Jan 19 06:43:22 curly kernel: Oops: 0000 [#1] PREEMPT SMP
Jan 19 06:43:22 curly kernel: CPU 1
Jan 19 06:43:22 curly kernel: Modules linked in: pci_stub vboxpci(O)
vboxnetadp(O) vboxnetflt(O) vboxdrv(O) i915 drm_kms_helper bnep rfcomm
bluetooth uinput act_police cls_basic cls_flow cls_fw cls_u32 sch_tbf
sch_prio sch_hfsc sch_htb sch_ingress sch_sfq bridge stp llc
xt_connlimit xt_realm xt_addrtype ip_set_hash_ip xt_comment ipt_ULOG
xt_recent ipt_REJECT ipt_REDIRECT ipt_NETMAP ipt_MASQUERADE ipt_ECN
ipt_ecn ipt_CLUSTERIP ipt_ah ip6_queue nf_nat_tftp nf_nat_sip
nf_nat_pptp nf_nat_proto_gre nf_nat_irc xt_set nf_nat_h323 nf_nat_ftp
nf_nat_amanda nf_conntrack_tftp nf_conntrack_sane nf_conntrack_sip
nf_conntrack_proto_udplite nf_conntrack_proto_sctp nf_conntrack_pptp
nf_conntrack_proto_gre nf_conntrack_netlink nf_conntrack_netbios_ns
nf_conntrack_broadcast ts_kmp nf_conntrack_irc nf_conntrack_amanda
nf_conntrack_h323 nf_conntrack_ftp xt_time xt_TCPMSS xt_sctp xt_TPROXY
nf_tproxy_core xt_policy xt_tcpmss xt_pkttype xt_physdev xt_owner
xt_NFQUEUE xt_NFLOG nfnetlink_log xt_multiport xt_mark xt_mac xt_limit
xt_leng
Jan 19 06:43:22 curly kernel: th xt_iprange xt_helper xt_hashlimit
xt_DSCP xt_dscp xt_dccp xt_connmark xt_CLASSIFY ip6t_LOG ip6t_REJECT
ipt_LOG xt_state ip_set_hash_net ip_set nfnetlink fuse nfsd nfs lockd
auth_rpcgss nfs_acl sunrpc nf_conntrack_ipv6 nf_defrag_ipv6
ip6table_mangle ip6table_raw ip6table_filter ip6_tables xt_tcpudp ipv6
xt_conntrack iptable_mangle iptable_nat nf_nat nf_conntrack_ipv4
nf_conntrack nf_defrag_ipv4 iptable_raw iptable_filter ip_tables
x_tables configfs smsc47b397 coretemp loop dm_crypt joydev gspca_spca500
gspca_main usbhid videodev v4l2_compat_ioctl32 hid snd_hda_codec_realtek
tpm_infineon snd_hda_intel snd_hda_codec snd_pcm_oss snd_mixer_oss
snd_pcm snd_seq_dummy uhci_hcd snd_seq_oss e1000e snd_seq_midi hp_wmi
psmouse sparse_keymap evdev serio_raw snd_rawmidi tpm_tis ehci_hcd
pcspkr tpm snd_seq_midi_event snd_seq usbcore wmi iTCO_wdt floppy
snd_timer tpm_bios snd_seq_device snd usb_common soundcore
snd_page_alloc processor dm_mirror dm_region_hash dm_log dm_mod
ata_generic sr_mod cdro
Jan 19 06:43:22 curly kernel: m
Jan 19 06:43:22 curly kernel:
Jan 19 06:43:22 curly kernel: Pid: 360, comm: kswapd0 Tainted: G
W O 3.2.1-curly-0 #1 Hewlett-Packard HP Compaq dc7700 Small Form
Factor/0A54h
Jan 19 06:43:22 curly kernel: RIP: 0010:[<ffffffff810ca594>]
[<ffffffff810ca594>] dentry_lru_prune+0x22/0x49
Jan 19 06:43:22 curly kernel: RSP: 0018:ffff880079be7bf0 EFLAGS: 00010202
Jan 19 06:43:22 curly kernel: RAX: 0000000000000000 RBX:
ffff880041e85cc0 RCX: 0000000000002b2a
Jan 19 06:43:22 curly kernel: RDX: 0000000000002a2a RSI:
0000000000000000 RDI: ffff880041e85cc0
Jan 19 06:43:22 curly kernel: RBP: ffff880079be7c00 R08:
0000000000000000 R09: ffff88007dd10740
Jan 19 06:43:22 curly kernel: R10: ffff88007dd10740 R11:
ffff88007dd10740 R12: ffff880017021600
Jan 19 06:43:22 curly kernel: R13: ffff8800620afd80 R14:
0000000000000000 R15: ffff880018d8705c
Jan 19 06:43:22 curly kernel: FS: 0000000000000000(0000)
GS:ffff88007dd00000(0000) knlGS:0000000000000000
Jan 19 06:43:22 curly kernel: CS: 0010 DS: 0000 ES: 0000 CR0:
000000008005003b
Jan 19 06:43:22 curly kernel: CR2: 0000000000000028 CR3:
0000000013c41000 CR4: 00000000000006e0
Jan 19 06:43:22 curly kernel: DR0: 0000000000000000 DR1:
0000000000000000 DR2: 0000000000000000
Jan 19 06:43:22 curly kernel: DR3: 0000000000000000 DR6:
00000000ffff0ff0 DR7: 0000000000000400
Jan 19 06:43:22 curly kernel: Process kswapd0 (pid: 360, threadinfo
ffff880079be6000, task ffff88007a9c1e50)
Jan 19 06:43:22 curly kernel: Stack:
Jan 19 06:43:22 curly kernel: 0000000000000001 ffff880041e85cc0
ffff880079be7c30 ffffffff810cb3ba
Jan 19 06:43:22 curly kernel: ffff880041e85cc0 ffff880079be7cb0
ffff880041e85d40 ffff880041e85d1c
Jan 19 06:43:22 curly kernel: ffff880079be7c80 ffffffff810cb4f8
ffff880079be7c50 ffff88006fac9d80
Jan 19 06:43:22 curly kernel: Call Trace:
Jan 19 06:43:22 curly kernel: [<ffffffff810cb3ba>] dentry_kill+0x7f/0x14a
Jan 19 06:43:22 curly kernel: [<ffffffff810cb4f8>]
shrink_dentry_list+0x73/0xcf
Jan 19 06:43:22 curly kernel: [<ffffffff810cb6ad>]
__shrink_dcache_sb+0x159/0x168
Jan 19 06:43:22 curly kernel: [<ffffffff810cbfed>] prune_dcache_sb+0xe/0x10
Jan 19 06:43:22 curly kernel: [<ffffffff810bd18d>] prune_super+0xd4/0x14f
Jan 19 06:43:22 curly kernel: [<ffffffff8108caa4>] shrink_slab+0x11a/0x195
Jan 19 06:43:22 curly kernel: [<ffffffff8108efb2>] kswapd+0x4e9/0x793
Jan 19 06:43:22 curly kernel: [<ffffffff81047ecd>] ?
add_wait_queue+0x44/0x44
Jan 19 06:43:22 curly kernel: [<ffffffff8108eac9>] ?
try_to_free_pages+0x3ca/0x3ca
Jan 19 06:43:22 curly kernel: [<ffffffff81047853>] kthread+0x7f/0x87
Jan 19 06:43:22 curly kernel: [<ffffffff81390d34>]
kernel_thread_helper+0x4/0x10
Jan 19 06:43:22 curly kernel: [<ffffffff810477d4>] ?
kthread_worker_fn+0x141/0x141
Jan 19 06:43:22 curly kernel: [<ffffffff81390d30>] ? gs_change+0xb/0xb
Jan 19 06:43:22 curly kernel: Code: 1a 4a 2c 00 41 5b 5b 5d c3 55 48 89
e5 53 48 89 fb 50 48 8d 87 80 00 00 00 48 39 87 80 00 00 00 74 2c f6 07
10 74 07 48 8b 47 60 <ff> 50 28 48 c7 c7 00 04 4f 81 e8 55 47 2c 00 48
89 df e8 8a fd
Jan 19 06:43:22 curly kernel: RIP [<ffffffff810ca594>]
dentry_lru_prune+0x22/0x49
Jan 19 06:43:22 curly kernel: RSP <ffff880079be7bf0>
Jan 19 06:43:22 curly kernel: CR2: 0000000000000028
Jan 19 06:43:22 curly kernel: ---[ end trace a7919e7f17c0a729 ]---
Jan 19 06:43:22 curly kernel: note: kswapd0[360] exited with preempt_count 3
**********************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager at postmaster at dor.state.ma.us.
**********************************************************************
[-- Attachment #2: Attached Message Part --]
[-- Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kernel panic
2011-10-28 2:13 ` Thomas Renninger
@ 2011-10-31 12:24 ` Thomas Renninger
0 siblings, 0 replies; 45+ messages in thread
From: Thomas Renninger @ 2011-10-31 12:24 UTC (permalink / raw)
To: Bjorn Helgaas
Cc: nick bray, linux-kernel, linux-acpi, lenb, Zhao Yakui, Zhang Rui
On Friday 28 October 2011 04:13:50 Thomas Renninger wrote:
...
> Ah, maybe an older acpidump got used and the _CST method of the
> object is in a not exported, dynamically loaded SSDT.
> This is very likely.
>
> Please use a very recent acpidump:
> Hm, Len's ftp directory on kernel.org where latest acpidump was
> located is gone?
I've put a (hopefully) recent acpidump source here:
ftp.suse.com/pub/people/trenn/acpidump
Should get available in an hour or so.
I expect you see:
"Dynamic OEM Table Load"
message(s) in dmesg and the SSDT which includes the ACPI parts which are
causing this is loaded at runtime. Older acpidump versions were not able
to extract these, the one I put on my ftp account should be able to.
Can you run it and put the output somewhere (related Ubuntu bug?) and
provide a pointer to it, please.
Hm, you could create a bug here:
http://acpica.org/bugzilla
It looks like ACPI code in the _CST function is triggering an ACPICA
interpreter memory bug when it tries to evaluate the func (guessing...).
Thomas
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kernel panic
2011-10-26 18:10 ` Bjorn Helgaas
@ 2011-10-28 2:13 ` Thomas Renninger
2011-10-31 12:24 ` Thomas Renninger
0 siblings, 1 reply; 45+ messages in thread
From: Thomas Renninger @ 2011-10-28 2:13 UTC (permalink / raw)
To: Bjorn Helgaas
Cc: nick bray, linux-kernel, linux-acpi, lenb, Zhao Yakui, Zhang Rui
On Wednesday 26 October 2011 20:10:07 Bjorn Helgaas wrote:
> On Wed, Oct 26, 2011 at 11:11 AM, nick bray <nick.bray1@ntlworld.com> wrote:
...
> ...
> Brought up 2 CPUs
> ...
> ACPI: Power Button [PWRF]
> BUG: unable to handle kernel paging request at 00010282
> IP: [<00010282>] 0x10281
> *pde = 00000000
> Oops: 0000 [#1] SMP
> ...
> Pid: 1, comm: swapper Not tainted 3.0.0-12-generic #20-Ubuntu
> EIP: 0060:[<00010282>] EFLAGS: 00010282 CPU: 1
> ...
> ? resched_task+0x22/0x70
> ? __kmalloc+0x189/0x1e0
> acpi_ns_evaluate+0x3a/0x18d
> acpi_evaluate_object+0xd6/0x1c5
> ? try_to_wake_up+0x140/0x190
> acpi_processor_get_power_info_cst+0x53/0x297
> ? wait_for_completion+0x17/0x20
> ? default_spin_lock_flags+0x8/0x10
> ? _raw_spin_lock+0xd/0x10
> ? task_rq_lock+0x49/0x80
> ? set_cpus_allowed_ptr+0x53/0x110
> ? acpi_processor_get_throttling_fadt+0x72/0x7a
> acpi_processor_get_power_info+0x24/0x10c
> acpi_processor_power_init+0xdc/0x10c
> acpi_processor_add+0x131/0x1d2
> acpi_device_probe+0x41/0xf5
>
> I found a report with a serial console log showing a very similar
> backtrace here:
> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/807164
>
> Seems pretty clearly related to acpi_processor_get_power_info();
> hopefully an expert in that area will jump in and help out.
This is really strange..., it happens when trying to evaluate
_CST on a processor object.
But processor objects are declared:
Scope (\_PR)
{
Processor (CPU1, 0x01, 0x00000410, 0x06) {}
Processor (CPU2, 0x02, 0x00000410, 0x06) {}
}
and do not have a _CST func. I got the DSDT from the Ubuntu
bug, you may want to double check:
acpidump >acpidump
acpixtract -a acpidump
iasl *.dat
grep _CST *.dsl
If you have a processor object with _CST function you could
try to reproduce this in userspace by using acpiexec from the
acpica utilities.
acpiexec DSDT.dat
-> methods shows you the available ones
-> execute \_PR.CPU1._CST (or similar possibly triggers some mem corruption?)
Ah, maybe an older acpidump got used and the _CST method of the
object is in a not exported, dynamically loaded SSDT.
This is very likely.
Please use a very recent acpidump:
Hm, Len's ftp directory on kernel.org where latest acpidump was
located is gone?
Latest openSUSE acpica package has everything mentioned above included :)
Could get a problem to feed acpiexec with the DSDT and SSDT.., you may
have to glue them (better ask again then). Best is you run it with valgrind.
bugzilla.kernel.org is still down?
Thomas
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kernel panic
[not found] ` <4EA83F5D.20001@ntlworld.com>
@ 2011-10-26 18:10 ` Bjorn Helgaas
2011-10-28 2:13 ` Thomas Renninger
0 siblings, 1 reply; 45+ messages in thread
From: Bjorn Helgaas @ 2011-10-26 18:10 UTC (permalink / raw)
To: nick bray
Cc: linux-kernel, linux-acpi, lenb, Zhao Yakui, Zhang Rui, Thomas Renninger
On Wed, Oct 26, 2011 at 11:11 AM, nick bray <nick.bray1@ntlworld.com> wrote:
> On 26/10/11 17:18, Bjorn Helgaas wrote:
>>
>> On Wed, Oct 26, 2011 at 9:33 AM, nick bray<nick.bray1@ntlworld.com>
>> wrote:
>>>
>>> On 26/10/11 15:53, Bjorn Helgaas wrote:
>>>>
>>>> On Wed, Oct 26, 2011 at 4:00 AM, Len Brown<lenb417@gmail.com> wrote:
>>>>>>>
>>>>>>> after upgrading to linux kernel 3.xx I get kernel panic on boot
>>>>>>> unless
>>>>>>> I
>>>>>>> use ACPI=off in the boot parameters this happens with both Ubuntu
>>>>>>> 11.10
>>>>>>> and
>>>>>>> Fedora 16. The mainboard is an Intel S875WP1-E running a Pentuim 4
>>>>>>> 3ghz
>>>>>>> with
>>>>>>> 3gig RAM in single-channel mode. I have performed a Bios upgrade just
>>>>>>> in
>>>>>>> case tha ACPI tables were corrupt but it makes no difference.
>>>>>>> Currently
>>>>>>> running 2.6.38-11-generic #50-Ubuntu SMP (Linux Mint) with no issues.
>>>>>
>>>>> Is this problem new in 3.1, or is it also present in 2.6.39 or 3.0?
>>>>>
>>>>> Also, do any other cmdline parmaters besides acpi=off work-around it?
>>>>> pci=noacpi
>>>>> maxcpus=1
>>>>>
>>>>> etc.
>>>>
>>>> Please keep all the cc's when responding. Saves you work, saves us work
>>>> :)
>>>>
>>>> Summary of what I think you're seeing (please correct if wrong):
>>>>
>>>> 2.6.38 (Ubuntu/Mint): works fine, even with no boot args
>>>> 2.6.38 (Fedora 15): works fine, even with no boot args
>>>> 2.6.40? (Fedora 15 with upgraded kernel): requires "acpi=off" to boot
>>>> 3.0.0-12 (Ubuntu/Mint): requires "acpi=off" or "maxcpus=1" to boot.
>>>> "pci=noacpi" makes no difference. with no arguments, panics as in
>>>> attached screenshot.
>>>> 3.1.0-0.rc6 (Fedora 16 live CD): can't find root device, drops to
>>>> debug shell, even with "maxcpus=1"
>>>>
>>>> Let's focus on Ubuntu and forget Fedora for now.
>>>>
>>>> The screenshot you sent (attached) has a clue ("EIP: [<00000000>] 0x0
>>>> SS:ESP 007b:00000046 CR2: 00000000ffffffff, Fatal exception in
>>>> interrupt") but doesn't really have enough context. I should have
>>>> suggested booting with "vga=0xf07". That will use a smaller font, so
>>>> the photo can capture more information. Can you try that? You might
>>>> have to use a lower jpg quality setting or resave with gimp at a low
>>>> quality setting to make the size 100K or less for the mailing lists.
>>>>
>>>> If you can boot 3.0.0-12 with "maxcpus=1", collect the dmesg log and
>>>> maybe we can compare it with the new "vga=0xf07" screenshot.
>>>
>>> your summary is correct. Please see new screenshot taken with
>>> a
>>> better camera with the light off! Also I have resized it to>100k Though
>>> I
>>> can't see a difference in the txt size even though I used vga=0xf07. also
>>> attached dmesg from Ubuntu 11.10 with maxcpus=1. Thank you for the time
>>> and
>>> interest. :)
>>
>> Please use reply-all... it saves work for everybody!
>>
>> Dunno why vga= doesn't do anything. But this panic is different from
>> the first (and probably more useful). Looks like this problem might
>> be in the acpi_processor_add() path, which might explain why
>> "maxcpus=1" makes a difference.
>>
>> I added cc: to a few people who have recently changed the ACPI processor
>> driver.
>>
>> Are you able to build test kernels yourself? If so, you could
>> sprinkle printks() in acpi_processor_add(), maybe with some
>> mdelay(100) calls to slow things down.
>>
>> There's also a "boot_delay=" parameter that supposedly slows down boot
>> printks. I haven't had much luck with it myself, but "boot_delay=100"
>> or so might allow you to get more snapshots of the beginning of the
>> stacktrace.
>>
>> Bjorn
>
> ok reply all it is, I'm sorry I've never needed to report something like
> this before. I've been using Linux now for around 10 years and consider
> myself reasonably competent at configuration and suchlike but never
> successfully built a kernel (I'm not a coder/programmer), something tells me
> that now is probably not a good time to try. ;)
>
> anyway here is a whole bunch of jpegs taken with boot_delay=100 I'm afraid
> they're not contiguous as some of they were too blurred to bother sending. I
> hope the info is useful.
Perfect, thanks! Manual transcription of the interesting parts:
...
Brought up 2 CPUs
...
ACPI: Power Button [PWRF]
BUG: unable to handle kernel paging request at 00010282
IP: [<00010282>] 0x10281
*pde = 00000000
Oops: 0000 [#1] SMP
...
Pid: 1, comm: swapper Not tainted 3.0.0-12-generic #20-Ubuntu
EIP: 0060:[<00010282>] EFLAGS: 00010282 CPU: 1
...
? resched_task+0x22/0x70
? __kmalloc+0x189/0x1e0
acpi_ns_evaluate+0x3a/0x18d
acpi_evaluate_object+0xd6/0x1c5
? try_to_wake_up+0x140/0x190
acpi_processor_get_power_info_cst+0x53/0x297
? wait_for_completion+0x17/0x20
? default_spin_lock_flags+0x8/0x10
? _raw_spin_lock+0xd/0x10
? task_rq_lock+0x49/0x80
? set_cpus_allowed_ptr+0x53/0x110
? acpi_processor_get_throttling_fadt+0x72/0x7a
acpi_processor_get_power_info+0x24/0x10c
acpi_processor_power_init+0xdc/0x10c
acpi_processor_add+0x131/0x1d2
acpi_device_probe+0x41/0xf5
I found a report with a serial console log showing a very similar
backtrace here:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/807164
Seems pretty clearly related to acpi_processor_get_power_info();
hopefully an expert in that area will jump in and help out.
Bjorn
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kernel panic
[not found] ` <4EA82832.2070201@ntlworld.com>
@ 2011-10-26 16:18 ` Bjorn Helgaas
[not found] ` <4EA83F5D.20001@ntlworld.com>
0 siblings, 1 reply; 45+ messages in thread
From: Bjorn Helgaas @ 2011-10-26 16:18 UTC (permalink / raw)
To: nick bray
Cc: linux-kernel, linux-acpi, lenb, Zhao Yakui, Zhang Rui, Thomas Renninger
[-- Attachment #1: Type: text/plain, Size: 3379 bytes --]
On Wed, Oct 26, 2011 at 9:33 AM, nick bray <nick.bray1@ntlworld.com> wrote:
> On 26/10/11 15:53, Bjorn Helgaas wrote:
>>
>> On Wed, Oct 26, 2011 at 4:00 AM, Len Brown<lenb417@gmail.com> wrote:
>>>>>
>>>>> after upgrading to linux kernel 3.xx I get kernel panic on boot unless
>>>>> I
>>>>> use ACPI=off in the boot parameters this happens with both Ubuntu 11.10
>>>>> and
>>>>> Fedora 16. The mainboard is an Intel S875WP1-E running a Pentuim 4 3ghz
>>>>> with
>>>>> 3gig RAM in single-channel mode. I have performed a Bios upgrade just
>>>>> in
>>>>> case tha ACPI tables were corrupt but it makes no difference. Currently
>>>>> running 2.6.38-11-generic #50-Ubuntu SMP (Linux Mint) with no issues.
>>>
>>> Is this problem new in 3.1, or is it also present in 2.6.39 or 3.0?
>>>
>>> Also, do any other cmdline parmaters besides acpi=off work-around it?
>>> pci=noacpi
>>> maxcpus=1
>>>
>>> etc.
>>
>> Please keep all the cc's when responding. Saves you work, saves us work
>> :)
>>
>> Summary of what I think you're seeing (please correct if wrong):
>>
>> 2.6.38 (Ubuntu/Mint): works fine, even with no boot args
>> 2.6.38 (Fedora 15): works fine, even with no boot args
>> 2.6.40? (Fedora 15 with upgraded kernel): requires "acpi=off" to boot
>> 3.0.0-12 (Ubuntu/Mint): requires "acpi=off" or "maxcpus=1" to boot.
>> "pci=noacpi" makes no difference. with no arguments, panics as in
>> attached screenshot.
>> 3.1.0-0.rc6 (Fedora 16 live CD): can't find root device, drops to
>> debug shell, even with "maxcpus=1"
>>
>> Let's focus on Ubuntu and forget Fedora for now.
>>
>> The screenshot you sent (attached) has a clue ("EIP: [<00000000>] 0x0
>> SS:ESP 007b:00000046 CR2: 00000000ffffffff, Fatal exception in
>> interrupt") but doesn't really have enough context. I should have
>> suggested booting with "vga=0xf07". That will use a smaller font, so
>> the photo can capture more information. Can you try that? You might
>> have to use a lower jpg quality setting or resave with gimp at a low
>> quality setting to make the size 100K or less for the mailing lists.
>>
>> If you can boot 3.0.0-12 with "maxcpus=1", collect the dmesg log and
>> maybe we can compare it with the new "vga=0xf07" screenshot.
> your summary is correct. Please see new screenshot taken with a
> better camera with the light off! Also I have resized it to >100k Though I
> can't see a difference in the txt size even though I used vga=0xf07. also
> attached dmesg from Ubuntu 11.10 with maxcpus=1. Thank you for the time and
> interest. :)
Please use reply-all... it saves work for everybody!
Dunno why vga= doesn't do anything. But this panic is different from
the first (and probably more useful). Looks like this problem might
be in the acpi_processor_add() path, which might explain why
"maxcpus=1" makes a difference.
I added cc: to a few people who have recently changed the ACPI processor driver.
Are you able to build test kernels yourself? If so, you could
sprinkle printks() in acpi_processor_add(), maybe with some
mdelay(100) calls to slow things down.
There's also a "boot_delay=" parameter that supposedly slows down boot
printks. I haven't had much luck with it myself, but "boot_delay=100"
or so might allow you to get more snapshots of the beginning of the
stacktrace.
Bjorn
[-- Attachment #2: dmesg --]
[-- Type: text/plain, Size: 42083 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-12-generic (buildd@vernadsky) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #20-Ubuntu SMP Fri Oct 7 14:50:42 UTC 2011 (Ubuntu 3.0.0-12.20-generic 3.0.4)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfe30000 (usable)
[ 0.000000] BIOS-e820: 00000000bfe30000 - 00000000bfe414a0 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfe414a0 - 00000000bff30000 (usable)
[ 0.000000] BIOS-e820: 00000000bff30000 - 00000000bff40000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bff40000 - 00000000bfff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: /S875WP1 , BIOS WP87510A.86B.0059.P18.0502071117 02/07/2005
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0xbff30 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 365f2000 - 372f1000
[ 0.000000] ACPI: RSDP 000f61a0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT bff30000 00030 (v01 INTEL S875PWP4 20050207 MSFT 00000097)
[ 0.000000] ACPI: FACP bff30200 00081 (v02 INTEL S875PWP4 20050207 MSFT 00000097)
[ 0.000000] ACPI: DSDT bff30370 0424E (v01 INTEL S875PWP4 00000001 MSFT 0100000D)
[ 0.000000] ACPI: FACS bff40000 00040
[ 0.000000] ACPI: APIC bff30300 00068 (v01 INTEL S875PWP4 20050207 MSFT 00000097)
[ 0.000000] ACPI: WDDT bff345c0 00040 (v01 INTEL OEMWDDT 00000001 MSFT 0100000D)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2183MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000bff30
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bfe30
[ 0.000000] 0: 0x000bfe42 -> 0x000bff30
[ 0.000000] On node 0 totalpages: 786093
[ 0.000000] free_area_init_node: node 0, pgdat c17b11c0, node_mem_map f4df2200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4367 pages used for memmap
[ 0.000000] HighMem zone: 554513 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ecf0000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f4800000 s26240 r0 d22912 u2097152
[ 0.000000] pcpu-alloc: s26240 r0 d22912 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779950
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-12-generic root=UUID=ebc3e8ab-b14f-4d4c-921a-a24fc1938f69 ro quiet splash vt.handoff=7 maxcpus=1
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 12579328 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:000bff30)
[ 0.000000] Memory: 3083696k/3144896k available (5329k kernel code, 60676k reserved, 2589k data, 696k init, 2235520k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc17bc000 - 0xc186a000 ( 696 kB)
[ 0.000000] .data : 0xc1534784 - 0xc17bbd80 (2589 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1534784 (5329 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f3808000 soft=f380a000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2992.511 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.02 BogoMIPS (lpj=11970044)
[ 0.004010] pid_max: default: 32768 minimum: 301
[ 0.004040] Security Framework initialized
[ 0.004069] AppArmor: AppArmor initialized
[ 0.004072] Yama: becoming mindful.
[ 0.004145] Mount-cache hash table entries: 512
[ 0.004351] Initializing cgroup subsys cpuacct
[ 0.004359] Initializing cgroup subsys memory
[ 0.004370] Initializing cgroup subsys devices
[ 0.004374] Initializing cgroup subsys freezer
[ 0.004377] Initializing cgroup subsys net_cls
[ 0.004380] Initializing cgroup subsys blkio
[ 0.004392] Initializing cgroup subsys perf_event
[ 0.004436] CPU: Physical Processor ID: 0
[ 0.004439] CPU: Processor Core ID: 0
[ 0.004443] mce: CPU supports 4 MCE banks
[ 0.004455] CPU0: Thermal monitoring enabled (TM1)
[ 0.004689] SMP alternatives: switching to UP code
[ 0.015719] ACPI: Core revision 20110413
[ 0.018384] ftrace: allocating 24885 entries in 49 pages
[ 0.020100] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.020386] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062626] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
[ 0.064003] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.064003] ... version: 0
[ 0.064003] ... bit width: 40
[ 0.064003] ... generic registers: 18
[ 0.064003] ... value mask: 000000ffffffffff
[ 0.064003] ... max period: 0000007fffffffff
[ 0.064003] ... fixed-purpose events: 0
[ 0.064003] ... event mask: 000000000003ffff
[ 0.064003] Brought up 1 CPUs
[ 0.064003] Total of 1 processors activated (5985.02 BogoMIPS).
[ 0.064003] devtmpfs: initialized
[ 0.064003] PM: Registering ACPI NVS region at bfe30000 (70816 bytes)
[ 0.064003] PM: Registering ACPI NVS region at bff40000 (720896 bytes)
[ 0.064003] print_constraints: dummy:
[ 0.064003] Time: 15:10:30 Date: 10/26/11
[ 0.064034] NET: Registered protocol family 16
[ 0.064179] EISA bus registered
[ 0.064191] ACPI: bus type pci registered
[ 0.065577] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
[ 0.065579] PCI: Using configuration type 1 for base access
[ 0.066812] bio: create slab <bio-0> at 0
[ 0.067768] ACPI: EC: Look up EC in DSDT
[ 0.068873] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.071125] ACPI: Interpreter enabled
[ 0.071133] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.071160] ACPI: Using IOAPIC for interrupt routing
[ 0.075149] ACPI: Power Resource [URP1] (off)
[ 0.075199] ACPI: Power Resource [URP2] (off)
[ 0.075248] ACPI: Power Resource [FDDP] (off)
[ 0.075296] ACPI: Power Resource [LPTP] (off)
[ 0.077167] ACPI: No dock devices found.
[ 0.077171] HEST: Table not found.
[ 0.077177] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.077259] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.077417] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.077421] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.077424] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.077428] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xffffffff] (ignored)
[ 0.077446] pci 0000:00:00.0: [8086:2578] type 0 class 0x000600
[ 0.077451] pci 0000:00:00.0: Enabling MCH 'Overflow' Device
[ 0.077459] pci 0000:00:00.0: reg 10: [mem 0xf4000000-0xf7ffffff pref]
[ 0.077511] pci 0000:00:01.0: [8086:2579] type 1 class 0x000604
[ 0.077544] pci 0000:00:03.0: [8086:257b] type 1 class 0x000604
[ 0.077576] pci 0000:00:06.0: [8086:257e] type 0 class 0x000880
[ 0.077586] pci 0000:00:06.0: reg 10: [mem 0xfecf0000-0xfecf0fff]
[ 0.077655] pci 0000:00:1d.0: [8086:24d2] type 0 class 0x000c03
[ 0.077696] pci 0000:00:1d.0: reg 20: [io 0xcc00-0xcc1f]
[ 0.077728] pci 0000:00:1d.1: [8086:24d4] type 0 class 0x000c03
[ 0.077769] pci 0000:00:1d.1: reg 20: [io 0xd000-0xd01f]
[ 0.077801] pci 0000:00:1d.2: [8086:24d7] type 0 class 0x000c03
[ 0.077842] pci 0000:00:1d.2: reg 20: [io 0xd400-0xd41f]
[ 0.077873] pci 0000:00:1d.3: [8086:24de] type 0 class 0x000c03
[ 0.077914] pci 0000:00:1d.3: reg 20: [io 0xd800-0xd81f]
[ 0.077955] pci 0000:00:1d.7: [8086:24dd] type 0 class 0x000c03
[ 0.077977] pci 0000:00:1d.7: reg 10: [mem 0xfebffc00-0xfebfffff]
[ 0.078053] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.078059] pci 0000:00:1d.7: PME# disabled
[ 0.078076] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.078117] pci 0000:00:1f.0: [8086:24d0] type 0 class 0x000601
[ 0.078177] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.078196] pci 0000:00:1f.1: [8086:24db] type 0 class 0x000101
[ 0.078209] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.078219] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.078229] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.078238] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.078248] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf]
[ 0.078258] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
[ 0.078287] pci 0000:00:1f.2: [8086:24d1] type 0 class 0x000101
[ 0.078299] pci 0000:00:1f.2: reg 10: [io 0xec00-0xec07]
[ 0.078308] pci 0000:00:1f.2: reg 14: [io 0xe800-0xe803]
[ 0.078317] pci 0000:00:1f.2: reg 18: [io 0xe400-0xe407]
[ 0.078325] pci 0000:00:1f.2: reg 1c: [io 0xe000-0xe003]
[ 0.078334] pci 0000:00:1f.2: reg 20: [io 0xdc00-0xdc0f]
[ 0.078364] pci 0000:00:1f.3: [8086:24d3] type 0 class 0x000c05
[ 0.078405] pci 0000:00:1f.3: reg 20: [io 0xc800-0xc81f]
[ 0.078453] pci 0000:01:00.0: [10de:00f3] type 0 class 0x000300
[ 0.078472] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
[ 0.078483] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff pref]
[ 0.078493] pci 0000:01:00.0: reg 18: [mem 0xfc000000-0xfcffffff]
[ 0.078524] pci 0000:01:00.0: reg 30: [mem 0xfe8e0000-0xfe8fffff pref]
[ 0.078576] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.078580] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.078585] pci 0000:00:01.0: bridge window [mem 0xfa800000-0xfe8fffff]
[ 0.078589] pci 0000:00:01.0: bridge window [mem 0xd2700000-0xf26fffff pref]
[ 0.078609] pci 0000:02:01.0: [8086:1019] type 0 class 0x000200
[ 0.078624] pci 0000:02:01.0: reg 10: [mem 0xfe9e0000-0xfe9fffff]
[ 0.078638] pci 0000:02:01.0: reg 18: [io 0xac00-0xac1f]
[ 0.078675] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
[ 0.078680] pci 0000:02:01.0: PME# disabled
[ 0.078711] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[ 0.078715] pci 0000:00:03.0: bridge window [io 0xa000-0xafff]
[ 0.078719] pci 0000:00:03.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.078724] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.078745] pci 0000:03:02.0: [1057:1801] type 0 class 0x000480
[ 0.078757] pci 0000:03:02.0: reg 10: [mem 0xfeaf0000-0xfeafffff]
[ 0.078818] pci 0000:03:08.0: [8086:1050] type 0 class 0x000200
[ 0.078833] pci 0000:03:08.0: reg 10: [mem 0xfeaef000-0xfeaeffff]
[ 0.078842] pci 0000:03:08.0: reg 14: [io 0xbc00-0xbc3f]
[ 0.078889] pci 0000:03:08.0: supports D1 D2
[ 0.078891] pci 0000:03:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.078896] pci 0000:03:08.0: PME# disabled
[ 0.078926] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.078931] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
[ 0.078936] pci 0000:00:1e.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.078941] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.078944] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.078947] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.078961] pci_bus 0000:00: on NUMA node 0
[ 0.078965] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.079032] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.079077] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.079111] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.079252] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.082047] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.082127] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.082205] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.082281] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.082359] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.082436] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.082514] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.082593] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.082738] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.082743] vgaarb: loaded
[ 0.082744] vgaarb: bridge control possible 0000:01:00.0
[ 0.083038] SCSI subsystem initialized
[ 0.083127] libata version 3.00 loaded.
[ 0.083191] usbcore: registered new interface driver usbfs
[ 0.083207] usbcore: registered new interface driver hub
[ 0.083242] usbcore: registered new device driver usb
[ 0.083360] PCI: Using ACPI for IRQ routing
[ 0.083367] PCI: pci_cache_line_size set to 64 bytes
[ 0.083435] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.083439] reserve RAM buffer: 00000000bfe30000 - 00000000bfffffff
[ 0.083442] reserve RAM buffer: 00000000bff30000 - 00000000bfffffff
[ 0.083566] NetLabel: Initializing
[ 0.083569] NetLabel: domain hash size = 128
[ 0.083571] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.083585] NetLabel: unlabeled traffic allowed by default
[ 0.083734] hpet clockevent registered
[ 0.083739] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.083744] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.083749] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.088062] Switching to clocksource hpet
[ 0.091969] Switched to NOHz mode on CPU #0
[ 0.096454] AppArmor: AppArmor Filesystem Enabled
[ 0.096499] pnp: PnP ACPI init
[ 0.096523] ACPI: bus type pnp registered
[ 0.096650] pnp 00:00: [bus 00-ff]
[ 0.096654] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.096657] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.096659] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.096662] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.096665] pnp 00:00: [mem 0x00000000 window]
[ 0.096668] pnp 00:00: [mem 0xc0000000-0xffffffff window]
[ 0.096737] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.096789] pnp 00:01: [dma 4]
[ 0.096792] pnp 00:01: [io 0x0000-0x000f]
[ 0.096794] pnp 00:01: [io 0x0081-0x0083]
[ 0.096797] pnp 00:01: [io 0x0087]
[ 0.096799] pnp 00:01: [io 0x0089-0x008b]
[ 0.096801] pnp 00:01: [io 0x008f]
[ 0.096804] pnp 00:01: [io 0x00c0-0x00df]
[ 0.096835] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.096854] pnp 00:02: [io 0x0070-0x0071]
[ 0.096871] pnp 00:02: [irq 8]
[ 0.096903] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.096948] pnp 00:03: [io 0x0060]
[ 0.096951] pnp 00:03: [io 0x0064]
[ 0.096956] pnp 00:03: [irq 1]
[ 0.096990] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.097146] pnp 00:04: [io 0x0061]
[ 0.097182] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.097195] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.097202] pnp 00:05: [irq 13]
[ 0.097237] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.097326] pnp 00:06: [io 0x03f0-0x03f1]
[ 0.097329] pnp 00:06: [io 0x03f2-0x03f3]
[ 0.097331] pnp 00:06: [io 0x03f4-0x03f5]
[ 0.097334] pnp 00:06: [io 0x03f7]
[ 0.097339] pnp 00:06: [irq 6]
[ 0.097342] pnp 00:06: [dma 2]
[ 0.097404] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.097615] pnp 00:07: [io 0x03f8-0x03ff]
[ 0.097622] pnp 00:07: [irq 4]
[ 0.097704] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.097913] pnp 00:08: [io 0x02f8-0x02ff]
[ 0.097920] pnp 00:08: [irq 3]
[ 0.098001] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.098247] pnp 00:09: [io 0x0378-0x037f]
[ 0.098253] pnp 00:09: [irq 7]
[ 0.098322] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.098393] pnp 00:0a: [io 0x0010-0x001f]
[ 0.098396] pnp 00:0a: [io 0x0022-0x003f]
[ 0.098399] pnp 00:0a: [io 0x0044-0x005f]
[ 0.098401] pnp 00:0a: [io 0x0062-0x0063]
[ 0.098404] pnp 00:0a: [io 0x0065-0x006f]
[ 0.098406] pnp 00:0a: [io 0x0072-0x007f]
[ 0.098408] pnp 00:0a: [io 0x0080]
[ 0.098411] pnp 00:0a: [io 0x0084-0x0086]
[ 0.098413] pnp 00:0a: [io 0x0088]
[ 0.098415] pnp 00:0a: [io 0x008c-0x008e]
[ 0.098421] pnp 00:0a: [io 0x0090-0x009f]
[ 0.098424] pnp 00:0a: [io 0x00a2-0x00bf]
[ 0.098426] pnp 00:0a: [io 0x00e0-0x00ef]
[ 0.098428] pnp 00:0a: [io 0x04d0-0x04d1]
[ 0.098498] system 00:0a: [io 0x04d0-0x04d1] has been reserved
[ 0.098503] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.098574] pnp 00:0b: [mem 0xffb00000-0xffbfffff]
[ 0.098577] pnp 00:0b: [mem 0xfff00000-0xffffffff]
[ 0.098613] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.098799] pnp 00:0c: [io 0x0400-0x047f]
[ 0.098803] pnp 00:0c: [io 0x0000-0xffffffff disabled]
[ 0.098806] pnp 00:0c: [io 0x0680-0x06ff]
[ 0.098808] pnp 00:0c: [io 0x0500-0x053f]
[ 0.098811] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[ 0.098813] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
[ 0.098816] pnp 00:0c: [mem 0xfed20000-0xfed9ffff]
[ 0.098868] system 00:0c: [io 0x0400-0x047f] has been reserved
[ 0.098873] system 00:0c: [io 0x0680-0x06ff] has been reserved
[ 0.098876] system 00:0c: [io 0x0500-0x053f] has been reserved
[ 0.098880] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.098883] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.098886] system 00:0c: [mem 0xfed20000-0xfed9ffff] has been reserved
[ 0.098890] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.099120] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[ 0.099124] pnp 00:0d: [mem 0x000c0000-0x000dffff]
[ 0.099127] pnp 00:0d: [mem 0x000e0000-0x000fffff]
[ 0.099129] pnp 00:0d: [mem 0x00100000-0xbfffffff]
[ 0.099132] pnp 00:0d: [mem 0x00000000-0xffffffff disabled]
[ 0.099187] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.099192] system 00:0d: [mem 0x000c0000-0x000dffff] could not be reserved
[ 0.099195] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.099198] system 00:0d: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.099202] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.099420] pnp: PnP ACPI: found 14 devices
[ 0.099423] ACPI: ACPI bus type pnp unregistered
[ 0.099428] PnPBIOS: Disabled by ACPI PNP
[ 0.136161] PCI: max bus depth: 1 pci_try_num: 2
[ 0.136187] pci 0000:00:1f.1: BAR 5: assigned [mem 0xc0000000-0xc00003ff]
[ 0.136194] pci 0000:00:1f.1: BAR 5: set to [mem 0xc0000000-0xc00003ff] (PCI address [0xc0000000-0xc00003ff])
[ 0.136198] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.136201] pci 0000:00:01.0: bridge window [io disabled]
[ 0.136207] pci 0000:00:01.0: bridge window [mem 0xfa800000-0xfe8fffff]
[ 0.136212] pci 0000:00:01.0: bridge window [mem 0xd2700000-0xf26fffff pref]
[ 0.136218] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[ 0.136221] pci 0000:00:03.0: bridge window [io 0xa000-0xafff]
[ 0.136226] pci 0000:00:03.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.136230] pci 0000:00:03.0: bridge window [mem pref disabled]
[ 0.136236] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 0.136240] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
[ 0.136245] pci 0000:00:1e.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.136250] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.136271] pci 0000:00:1e.0: setting latency timer to 64
[ 0.136275] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.136278] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.136281] pci_bus 0000:01: resource 1 [mem 0xfa800000-0xfe8fffff]
[ 0.136284] pci_bus 0000:01: resource 2 [mem 0xd2700000-0xf26fffff pref]
[ 0.136287] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
[ 0.136290] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.136293] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
[ 0.136296] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.136299] pci_bus 0000:03: resource 4 [io 0x0000-0xffff]
[ 0.136301] pci_bus 0000:03: resource 5 [mem 0x00000000-0xffffffff]
[ 0.136353] NET: Registered protocol family 2
[ 0.136429] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.136771] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.137663] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.138231] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.138236] TCP reno registered
[ 0.138245] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.138267] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.138430] NET: Registered protocol family 1
[ 0.138572] pci 0000:01:00.0: Boot video device
[ 0.138590] pci 0000:03:08.0: Firmware left e100 interrupts enabled; disabling
[ 0.138597] PCI: CLS 64 bytes, default 64
[ 0.139004] audit: initializing netlink socket (disabled)
[ 0.139019] type=2000 audit(1319641830.132:1): initialized
[ 0.158257] Trying to unpack rootfs image as initramfs...
[ 0.200114] highmem bounce pool size: 64 pages
[ 0.200123] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.236276] VFS: Disk quotas dquot_6.5.2
[ 0.236364] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.244230] fuse init (API version 7.16)
[ 0.244394] msgmni has been set to 1656
[ 0.252306] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.256246] io scheduler noop registered
[ 0.256250] io scheduler deadline registered
[ 0.256299] io scheduler cfq registered (default)
[ 0.256496] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.256538] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.256706] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[ 0.256716] ACPI: Sleep Button [SLPB]
[ 0.256769] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.256774] ACPI: Power Button [PWRF]
[ 0.256804] ACPI: acpi_idle registered with cpuidle
[ 0.258559] ERST: Table is not found!
[ 0.258724] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.279073] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.279108] isapnp: Scanning for PnP cards...
[ 0.412511] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.453920] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.492683] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.560624] Linux agpgart interface v0.103
[ 0.560742] agpgart-intel 0000:00:00.0: Intel i875 Chipset
[ 0.562918] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf4000000
[ 0.564453] brd: module loaded
[ 0.565165] loop: module loaded
[ 0.565377] ata_piix 0000:00:1f.1: version 2.13
[ 0.565391] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 0.565414] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.565473] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.568140] scsi0 : ata_piix
[ 0.572129] scsi1 : ata_piix
[ 0.573322] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.573326] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.573410] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.573417] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 0.573473] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.573892] scsi2 : ata_piix
[ 0.574077] scsi3 : ata_piix
[ 0.575019] ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 18
[ 0.575023] ata4: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 18
[ 0.575501] Fixed MDIO Bus: probed
[ 0.575537] PPP generic driver version 2.4.2
[ 0.575632] tun: Universal TUN/TAP device driver, 1.6
[ 0.575635] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.575749] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.575789] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.575814] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.575819] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.575874] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.575910] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.579787] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.584286] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebffc00
[ 0.643872] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.728608] hub 1-0:1.0: USB hub found
[ 0.728617] hub 1-0:1.0: 8 ports detected
[ 0.728720] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.728742] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.728822] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.728833] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.728838] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.728913] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.728953] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000cc00
[ 0.729113] hub 2-0:1.0: USB hub found
[ 0.729120] hub 2-0:1.0: 2 ports detected
[ 0.729200] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.729208] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.729211] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.729262] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.729300] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d000
[ 0.729448] hub 3-0:1.0: USB hub found
[ 0.729453] hub 3-0:1.0: 2 ports detected
[ 0.729517] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.729526] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.729529] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.729579] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.729604] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400
[ 0.729750] hub 4-0:1.0: USB hub found
[ 0.729755] hub 4-0:1.0: 2 ports detected
[ 0.729827] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.729835] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.729838] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.729885] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.729908] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d800
[ 0.730055] hub 5-0:1.0: USB hub found
[ 0.730060] hub 5-0:1.0: 2 ports detected
[ 0.730194] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.730197] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.730971] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.731073] mousedev: PS/2 mouse device common for all mice
[ 0.731212] rtc_cmos 00:02: RTC can wake from S4
[ 0.731319] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.731343] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.731488] device-mapper: uevent: version 1.0.3
[ 0.731589] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 0.731628] EISA: Probing bus 0 at eisa.0
[ 0.731663] EISA: Detected 0 cards.
[ 0.731679] cpufreq-nforce2: No nForce2 chipset.
[ 0.731683] cpuidle: using governor ladder
[ 0.731685] cpuidle: using governor menu
[ 0.731687] EFI Variables Facility v0.08 2004-May-17
[ 0.732369] ata2.00: ATAPI: PIONEER DVD-RW DVR-115D, 1.13, max UDMA/66
[ 0.736506] TCP cubic registered
[ 0.736547] ata1.00: ATA-7: SAMSUNG HD300LD, WK100-12, max UDMA/100
[ 0.736551] ata1.00: 586072368 sectors, multi 16: LBA48
[ 0.737040] NET: Registered protocol family 10
[ 0.737723] NET: Registered protocol family 17
[ 0.737759] Registering the dns_resolver key type
[ 0.737792] Using IPI No-Shortcut mode
[ 0.737940] PM: Hibernation image not present or could not be loaded.
[ 0.737954] registered taskstats version 1
[ 0.757624] ata1.00: configured for UDMA/100
[ 0.808628] ata2.00: configured for UDMA/66
[ 0.808711] ata3.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7
[ 0.808715] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.808839] ata2.00: TEST_UNIT_READY failed (err_mask=0x2)
[ 0.816521] ata3.00: configured for UDMA/133
[ 0.824355] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.979637] isapnp: No Plug & Play device found
[ 0.979819] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD300LD WK10 PQ: 0 ANSI: 5
[ 0.980068] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.980179] sd 0:0:0:0: [sda] 586072368 512-byte logical blocks: (300 GB/279 GiB)
[ 0.980253] sd 0:0:0:0: [sda] Write Protect is off
[ 0.980256] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.980288] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.009887] sda: sda1 sda2 < sda5 >
[ 1.010347] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.025178] Freeing initrd memory: 13308k freed
[ 1.051485] Magic number: 15:186:185
[ 1.051549] pci 0000:02:01.0: hash matches
[ 1.051599] rtc_cmos 00:02: setting system clock to 2011-10-26 15:10:31 UTC (1319641831)
[ 1.051621] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.051624] EDD information not available.
[ 1.096028] usb 1-7: new high speed USB device number 3 using ehci_hcd
[ 1.136015] Refined TSC clocksource calibration: 2992.499 MHz.
[ 1.136022] Switching to clocksource tsc
[ 1.496012] usb 2-1: new low speed USB device number 2 using uhci_hcd
[ 5.908143] ata2.00: configured for UDMA/66
[ 5.931798] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-115D 1.13 PQ: 0 ANSI: 5
[ 5.949788] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 5.949792] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 5.949932] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.950013] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.950162] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5
[ 5.950324] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 5.950411] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 5.950483] sd 2:0:0:0: [sdb] Write Protect is off
[ 5.950487] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.950518] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.991751] sdb: sdb1 sdb2 < sdb5 >
[ 5.992134] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 5.992175] Freeing unused kernel memory: 696k freed
[ 5.992867] Write protecting the kernel text: 5332k
[ 5.992926] Write protecting the kernel read-only data: 2188k
[ 6.023560] udevd[86]: starting version 173
[ 6.259292] Floppy drive(s): fd0 is 1.44M
[ 6.275845] FDC 0 is a post-1991 82077
[ 6.285684] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 6.285689] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 6.285734] e1000 0000:02:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 6.285743] e1000 0000:02:01.0: setting latency timer to 64
[ 6.333916] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 6.333920] e100: Copyright(c) 1999-2006 Intel Corporation
[ 6.333976] e100 0000:03:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 6.394974] usbcore: registered new interface driver uas
[ 6.401544] Initializing USB Mass Storage driver...
[ 6.409159] scsi4 : usb-storage 1-7:1.0
[ 6.409421] e100 0000:03:08.0: PME# disabled
[ 6.412196] e100 0000:03:08.0: eth0: addr 0xfeaef000, irq 20, MAC addr 00:13:20:42:ee:af
[ 6.412709] usbcore: registered new interface driver usb-storage
[ 6.412713] USB Mass Storage support registered.
[ 6.419702] input: HID 04d9:0499 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3
[ 6.419864] generic-usb 0003:04D9:0499.0001: input,hidraw0: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:1d.0-1/input0
[ 6.419889] usbcore: registered new interface driver usbhid
[ 6.419892] usbhid: USB HID core driver
[ 6.687661] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.734380] e1000 0000:02:01.0: eth1: (PCI:33MHz:32-bit) 00:13:20:42:ee:ae
[ 6.734392] e1000 0000:02:01.0: eth1: Intel(R) PRO/1000 Network Connection
[ 7.414981] scsi 4:0:0:0: Direct-Access USB2.0 SMARTMEDIA/XD PQ: 0 ANSI: 0 CCS
[ 7.417218] scsi 4:0:0:1: Direct-Access USB2.0 CompactFlashCard PQ: 0 ANSI: 0 CCS
[ 7.419350] scsi 4:0:0:2: Direct-Access USB2.0 SD/MMC card PQ: 0 ANSI: 0 CCS
[ 7.421342] scsi 4:0:0:3: Direct-Access USB2.0 MemoryStick Card PQ: 0 ANSI: 0 CCS
[ 7.421937] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 7.422151] sd 4:0:0:1: Attached scsi generic sg4 type 0
[ 7.422344] sd 4:0:0:2: Attached scsi generic sg5 type 0
[ 7.422530] sd 4:0:0:3: Attached scsi generic sg6 type 0
[ 7.449831] sd 4:0:0:1: [sdd] Attached SCSI removable disk
[ 7.452704] sd 4:0:0:2: [sde] Attached SCSI removable disk
[ 7.455702] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[ 7.458699] sd 4:0:0:3: [sdf] Attached SCSI removable disk
[ 16.715373] Adding 3048444k swap on /dev/sda5. Priority:-1 extents:1 across:3048444k
[ 16.724461] udevd[293]: starting version 173
[ 16.790857] lp: driver loaded but no devices found
[ 16.834587] Adding 3047420k swap on /dev/sdb5. Priority:-2 extents:1 across:3047420k
[ 17.003587] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 17.026638] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,user_xattr
[ 17.361261] type=1400 audit(1319641847.804:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=496 comm="apparmor_parser"
[ 17.377798] type=1400 audit(1319641847.820:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=496 comm="apparmor_parser"
[ 17.378128] type=1400 audit(1319641847.820:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=496 comm="apparmor_parser"
[ 17.512526] parport_pc 00:09: reported by Plug and Play ACPI
[ 17.512551] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 17.651237] lp0: using parport0 (interrupt-driven).
[ 17.903643] Intel 82802 RNG detected
[ 18.002231] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 18.025656] e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 18.025934] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 18.049957] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.318056] nvidia: module license 'NVIDIA' taints kernel.
[ 18.318060] Disabling lock debugging due to kernel taint
[ 19.964939] Echoaudio Darla20 0000:03:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 20.675924] type=1400 audit(1319641851.116:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=838 comm="apparmor_parser"
[ 20.691921] type=1400 audit(1319641851.132:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=840 comm="apparmor_parser"
[ 20.695193] type=1400 audit(1319641851.136:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=840 comm="apparmor_parser"
[ 20.695502] type=1400 audit(1319641851.136:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=840 comm="apparmor_parser"
[ 20.723535] type=1400 audit(1319641851.164:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=841 comm="apparmor_parser"
[ 20.748841] type=1400 audit(1319641851.192:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=841 comm="apparmor_parser"
[ 20.759508] type=1400 audit(1319641851.200:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=841 comm="apparmor_parser"
[ 21.082010] ppdev: user-space parallel port driver
[ 21.125398] init: failsafe main process (714) killed by TERM signal
[ 21.140344] init: apport pre-start process (905) terminated with status 1
[ 21.144796] init: alsa-restore main process (913) terminated with status 19
[ 21.215299] init: apport post-stop process (938) terminated with status 1
[ 21.257294] Card registered: Darla20 rev.0 (DSP56301) at 0xfeaf0000 irq 17
[-- Attachment #3: Ubuntu_maxcpus=1(1).JPG --]
[-- Type: image/jpeg, Size: 91772 bytes --]
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kernel panic
2011-10-26 10:00 ` Len Brown
@ 2011-10-26 14:53 ` Bjorn Helgaas
[not found] ` <4EA82832.2070201@ntlworld.com>
0 siblings, 1 reply; 45+ messages in thread
From: Bjorn Helgaas @ 2011-10-26 14:53 UTC (permalink / raw)
To: lenb; +Cc: nick bray, linux-kernel, linux-acpi
[-- Attachment #1: Type: text/plain, Size: 2009 bytes --]
On Wed, Oct 26, 2011 at 4:00 AM, Len Brown <lenb417@gmail.com> wrote:
>>> after upgrading to linux kernel 3.xx I get kernel panic on boot unless I
>>> use ACPI=off in the boot parameters this happens with both Ubuntu 11.10 and
>>> Fedora 16. The mainboard is an Intel S875WP1-E running a Pentuim 4 3ghz with
>>> 3gig RAM in single-channel mode. I have performed a Bios upgrade just in
>>> case tha ACPI tables were corrupt but it makes no difference. Currently
>>> running 2.6.38-11-generic #50-Ubuntu SMP (Linux Mint) with no issues.
>
> Is this problem new in 3.1, or is it also present in 2.6.39 or 3.0?
>
> Also, do any other cmdline parmaters besides acpi=off work-around it?
> pci=noacpi
> maxcpus=1
>
> etc.
Please keep all the cc's when responding. Saves you work, saves us work :)
Summary of what I think you're seeing (please correct if wrong):
2.6.38 (Ubuntu/Mint): works fine, even with no boot args
2.6.38 (Fedora 15): works fine, even with no boot args
2.6.40? (Fedora 15 with upgraded kernel): requires "acpi=off" to boot
3.0.0-12 (Ubuntu/Mint): requires "acpi=off" or "maxcpus=1" to boot.
"pci=noacpi" makes no difference. with no arguments, panics as in
attached screenshot.
3.1.0-0.rc6 (Fedora 16 live CD): can't find root device, drops to
debug shell, even with "maxcpus=1"
Let's focus on Ubuntu and forget Fedora for now.
The screenshot you sent (attached) has a clue ("EIP: [<00000000>] 0x0
SS:ESP 007b:00000046 CR2: 00000000ffffffff, Fatal exception in
interrupt") but doesn't really have enough context. I should have
suggested booting with "vga=0xf07". That will use a smaller font, so
the photo can capture more information. Can you try that? You might
have to use a lower jpg quality setting or resave with gimp at a low
quality setting to make the size 100K or less for the mailing lists.
If you can boot 3.0.0-12 with "maxcpus=1", collect the dmesg log and
maybe we can compare it with the new "vga=0xf07" screenshot.
Bjorn
[-- Attachment #2: ubuntu11.10-small.JPG --]
[-- Type: image/jpeg, Size: 93834 bytes --]
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kernel panic
2011-10-25 20:55 ` Bjorn Helgaas
@ 2011-10-26 10:00 ` Len Brown
2011-10-26 14:53 ` Bjorn Helgaas
0 siblings, 1 reply; 45+ messages in thread
From: Len Brown @ 2011-10-26 10:00 UTC (permalink / raw)
To: Bjorn Helgaas; +Cc: nick bray, linux-kernel, linux-acpi
>> after upgrading to linux kernel 3.xx I get kernel panic on boot unless I
>> use ACPI=off in the boot parameters this happens with both Ubuntu 11.10 and
>> Fedora 16. The mainboard is an Intel S875WP1-E running a Pentuim 4 3ghz with
>> 3gig RAM in single-channel mode. I have performed a Bios upgrade just in
>> case tha ACPI tables were corrupt but it makes no difference. Currently
>> running 2.6.38-11-generic #50-Ubuntu SMP (Linux Mint) with no issues.
Is this problem new in 3.1, or is it also present in 2.6.39 or 3.0?
Also, do any other cmdline parmaters besides acpi=off work-around it?
pci=noacpi
maxcpus=1
etc.
thanks,
Len Brown, Intel Open Source Technology Center
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kernel panic
2011-10-24 11:19 kernel panic nick bray
@ 2011-10-25 20:55 ` Bjorn Helgaas
2011-10-26 10:00 ` Len Brown
0 siblings, 1 reply; 45+ messages in thread
From: Bjorn Helgaas @ 2011-10-25 20:55 UTC (permalink / raw)
To: nick bray; +Cc: linux-kernel, linux-acpi
[+linux-acpi]
On Mon, Oct 24, 2011 at 5:19 AM, nick bray <nick.bray1@ntlworld.com> wrote:
> Hi,
> after upgrading to linux kernel 3.xx I get kernel panic on boot unless I
> use ACPI=off in the boot parameters this happens with both Ubuntu 11.10 and
> Fedora 16. The mainboard is an Intel S875WP1-E running a Pentuim 4 3ghz with
> 3gig RAM in single-channel mode. I have performed a Bios upgrade just in
> case tha ACPI tables were corrupt but it makes no difference. Currently
> running 2.6.38-11-generic #50-Ubuntu SMP (Linux Mint) with no issues. I can
> provide a screenshot if you wish but it's looking like it's ACPI related as
> above.
Yes, please provide a screenshot. A serial console log with "acpi=off
ignore_loglevel" would be even better.
Bjorn
^ permalink raw reply [flat|nested] 45+ messages in thread
* kernel panic
@ 2011-10-24 11:19 nick bray
2011-10-25 20:55 ` Bjorn Helgaas
0 siblings, 1 reply; 45+ messages in thread
From: nick bray @ 2011-10-24 11:19 UTC (permalink / raw)
To: linux-kernel
Hi,
after upgrading to linux kernel 3.xx I get kernel panic on boot unless
I use ACPI=off in the boot parameters this happens with both Ubuntu
11.10 and Fedora 16. The mainboard is an Intel S875WP1-E running a
Pentuim 4 3ghz with 3gig RAM in single-channel mode. I have performed a
Bios upgrade just in case tha ACPI tables were corrupt but it makes no
difference. Currently running 2.6.38-11-generic #50-Ubuntu SMP (Linux
Mint) with no issues. I can provide a screenshot if you wish but it's
looking like it's ACPI related as above.
Yours sincerely
Nick Bray
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kernel panic
2010-05-18 4:55 ` senthilkumaar2021
2010-05-18 5:05 ` Eric Dumazet
@ 2010-05-18 5:08 ` Justin P. Mattock
1 sibling, 0 replies; 45+ messages in thread
From: Justin P. Mattock @ 2010-05-18 5:08 UTC (permalink / raw)
To: senthilkumaar2021; +Cc: linux-kernel
On 05/17/2010 09:55 PM, senthilkumaar2021 wrote:
> Hi
>
> Thanks for the reply
>
> Initially i was using kernel 2.6.28.5 and kernel panic occurred in that
> version too
>
> tproxy is not supported in linux 2.6.32
>
> http://wiki.squid-cache.org/Features/Tproxy4
>
> kindly guide me how to proceed
>
> Regards
> senthil
>
hmm.. I'm wondering if this should be discussed here then.
In any case do you receive this error with 2.6.30
(even though 2.6.28 gives you this)
if so then doing a bisect might be a bit hard todo.
(unless 2.6.30 is good, then a bisect can at-least
point you in the right direction with what might be happening).
Justin P. Mattock
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kernel panic
2010-05-18 4:55 ` senthilkumaar2021
@ 2010-05-18 5:05 ` Eric Dumazet
2010-05-18 5:08 ` Justin P. Mattock
1 sibling, 0 replies; 45+ messages in thread
From: Eric Dumazet @ 2010-05-18 5:05 UTC (permalink / raw)
To: senthilkumaar2021; +Cc: Justin P. Mattock, linux-kernel
Le mardi 18 mai 2010 à 10:25 +0530, senthilkumaar2021 a écrit :
> Hi
>
> Thanks for the reply
>
> Initially i was using kernel 2.6.28.5 and kernel panic occurred in that
> version too
>
> tproxy is not supported in linux 2.6.32
>
> http://wiki.squid-cache.org/Features/Tproxy4
>
> kindly guide me how to proceed
Please submit full panic log, and kernel version
AFAIK tproxy is now in Linux kernel tree.
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kernel panic
2010-05-18 4:47 ` Justin P. Mattock
@ 2010-05-18 4:55 ` senthilkumaar2021
2010-05-18 5:05 ` Eric Dumazet
2010-05-18 5:08 ` Justin P. Mattock
0 siblings, 2 replies; 45+ messages in thread
From: senthilkumaar2021 @ 2010-05-18 4:55 UTC (permalink / raw)
To: Justin P. Mattock; +Cc: linux-kernel
Hi
Thanks for the reply
Initially i was using kernel 2.6.28.5 and kernel panic occurred in that
version too
tproxy is not supported in linux 2.6.32
http://wiki.squid-cache.org/Features/Tproxy4
kindly guide me how to proceed
Regards
senthil
Justin P. Mattock wrote:
> On 05/17/2010 09:23 PM, senthilkumaar2021 wrote:
>> HI
>>
>>
>> I am using iptables version 1.43 and getting the following error in
>> machine while using squid in tproxy.we are using Linux machine as bridge
>> too
>>
>> i was able to capture part of the error only please help me in solving
>> the issue
>>
>>
>> [<ffffffffa03933c2>] ? nf_nat_fn+0x138/0x14e [iptable_nat]
>> [<ffffffffa0393585>] ? nf_nat_in+0x2f/0x6e [iptable_nat]
>> [<ffffffffa027edaa>] ? br_nf_pre_routing_finish+0x0/
>> 0x2c4 [bridge]
>> [<ffffffffa027edfa>] br_nf_pre_routing_finish+0x50/
>> 0x2c4 [bridge]
>> [<ffffffffa027edaa>] ? br_nf_pre_routing_finish+0x0/
>> 0x2c4 [bridge]
>> [<ffffffff81339a50>] ? nf_hook_slow+0x68/0xc8
>> [<ffffffffa027edaa>] ? br_nf_pre_routing_finish+0x0/0x2c4 [bridge]
>> [<ffffffffa027f616>] br_nf_pre_routing+0x5a8/0x5c7 [bridge]
>> [<ffffffff813399ab>] nf_iterate+0x48/0x85
>> [<ffffffffa027a931>] ? br_handle_frame_finish+0x0/0x154 [bridge]
>> [<ffffffff81339a50>] nf_hook_slow+0x68/0xc8
>> [<ffffffffa027a931>] ? br_handle_frame_finish+0x0/0x154 [bridge]
>> [<ffffffffa027ac36>] br_handle_frame+0x1b1/0x1db [bridge]
>> [<ffffffff8131d54b>] netif_receive_skb+0x316/0x434
>> [<ffffffff8131dbfb>] napi_gro_receive+0x6e/0x83
>> [<ffffffffa0125bfe>] e1000_receive_skb+0x5c/0x65 [e1000e]
>> [<ffffffffa0125de8>] e1000_clean_rx_irq+0x1e1/0x28f [e1000e]
>> [<ffffffffa012730e>] e1000_clean+0x99/0x24a [e1000e]
>> [<ffffffff813bcfc5>] ? _spin_unlock_irqrestore+0x2c/0x43
>> [<ffffffff8131ba62>] net_rx_action+0xb8/0x1b4
>> [<ffffffff8104ed43>] __do_softirq+0x99/0x152
>> [<ffffffff8101284c>] call_softirq+0x1c/0x30
>> [<ffffffff81013a02>] do_softirq+0x52/0xb9
>> [<ffffffff8104e969>] irq_exit+0x53/0x8d
>> [<ffffffff81013d1a>] do_IRQ+0x135/0x157
>> [<ffffffff81011f93>] ret_from_intr+0x0/0x2e
>> <EOI> [<ffffffff81017e20>] ? mwait_idle+0x9e/0xc7
>> [<ffffffff81017e17>] ? mwait_idle+0x95/0xc7
>> [<ffffffff813bfd20>] ? atomic_notifier_call_chain+0x13/0x15
>> [<ffffffff810102f4>] ? enter_idle+0x27/0x2>
>>
>> Regards
>> senthil
>> --
>> To unsubscribe from this list: send the line "unsubscribe
>> linux-kernel" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>> Please read the FAQ at http://www.tux.org/lkml/
>>
>
>
> if you can.. find the last good kernel, then
> do a bisect.
> (if you need help doing a bisect, there's plenty
> of people to help you out).
>
> Justin P. Mattock
>
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kernel panic
2010-05-18 4:23 senthilkumaar2021
@ 2010-05-18 4:47 ` Justin P. Mattock
2010-05-18 4:55 ` senthilkumaar2021
0 siblings, 1 reply; 45+ messages in thread
From: Justin P. Mattock @ 2010-05-18 4:47 UTC (permalink / raw)
To: senthilkumaar2021; +Cc: linux-kernel
On 05/17/2010 09:23 PM, senthilkumaar2021 wrote:
> HI
>
>
> I am using iptables version 1.43 and getting the following error in
> machine while using squid in tproxy.we are using Linux machine as bridge
> too
>
> i was able to capture part of the error only please help me in solving
> the issue
>
>
> [<ffffffffa03933c2>] ? nf_nat_fn+0x138/0x14e [iptable_nat]
> [<ffffffffa0393585>] ? nf_nat_in+0x2f/0x6e [iptable_nat]
> [<ffffffffa027edaa>] ? br_nf_pre_routing_finish+0x0/
> 0x2c4 [bridge]
> [<ffffffffa027edfa>] br_nf_pre_routing_finish+0x50/
> 0x2c4 [bridge]
> [<ffffffffa027edaa>] ? br_nf_pre_routing_finish+0x0/
> 0x2c4 [bridge]
> [<ffffffff81339a50>] ? nf_hook_slow+0x68/0xc8
> [<ffffffffa027edaa>] ? br_nf_pre_routing_finish+0x0/0x2c4 [bridge]
> [<ffffffffa027f616>] br_nf_pre_routing+0x5a8/0x5c7 [bridge]
> [<ffffffff813399ab>] nf_iterate+0x48/0x85
> [<ffffffffa027a931>] ? br_handle_frame_finish+0x0/0x154 [bridge]
> [<ffffffff81339a50>] nf_hook_slow+0x68/0xc8
> [<ffffffffa027a931>] ? br_handle_frame_finish+0x0/0x154 [bridge]
> [<ffffffffa027ac36>] br_handle_frame+0x1b1/0x1db [bridge]
> [<ffffffff8131d54b>] netif_receive_skb+0x316/0x434
> [<ffffffff8131dbfb>] napi_gro_receive+0x6e/0x83
> [<ffffffffa0125bfe>] e1000_receive_skb+0x5c/0x65 [e1000e]
> [<ffffffffa0125de8>] e1000_clean_rx_irq+0x1e1/0x28f [e1000e]
> [<ffffffffa012730e>] e1000_clean+0x99/0x24a [e1000e]
> [<ffffffff813bcfc5>] ? _spin_unlock_irqrestore+0x2c/0x43
> [<ffffffff8131ba62>] net_rx_action+0xb8/0x1b4
> [<ffffffff8104ed43>] __do_softirq+0x99/0x152
> [<ffffffff8101284c>] call_softirq+0x1c/0x30
> [<ffffffff81013a02>] do_softirq+0x52/0xb9
> [<ffffffff8104e969>] irq_exit+0x53/0x8d
> [<ffffffff81013d1a>] do_IRQ+0x135/0x157
> [<ffffffff81011f93>] ret_from_intr+0x0/0x2e
> <EOI> [<ffffffff81017e20>] ? mwait_idle+0x9e/0xc7
> [<ffffffff81017e17>] ? mwait_idle+0x95/0xc7
> [<ffffffff813bfd20>] ? atomic_notifier_call_chain+0x13/0x15
> [<ffffffff810102f4>] ? enter_idle+0x27/0x2>
>
> Regards
> senthil
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
if you can.. find the last good kernel, then
do a bisect.
(if you need help doing a bisect, there's plenty
of people to help you out).
Justin P. Mattock
^ permalink raw reply [flat|nested] 45+ messages in thread
* kernel panic
@ 2010-05-18 4:23 senthilkumaar2021
2010-05-18 4:47 ` Justin P. Mattock
0 siblings, 1 reply; 45+ messages in thread
From: senthilkumaar2021 @ 2010-05-18 4:23 UTC (permalink / raw)
To: linux-kernel
HI
I am using iptables version 1.43 and getting the following error in
machine while using squid in tproxy.we are using Linux machine as bridge too
i was able to capture part of the error only please help me in solving
the issue
[<ffffffffa03933c2>] ? nf_nat_fn+0x138/0x14e [iptable_nat]
[<ffffffffa0393585>] ? nf_nat_in+0x2f/0x6e [iptable_nat]
[<ffffffffa027edaa>] ? br_nf_pre_routing_finish+0x0/
0x2c4 [bridge]
[<ffffffffa027edfa>] br_nf_pre_routing_finish+0x50/
0x2c4 [bridge]
[<ffffffffa027edaa>] ? br_nf_pre_routing_finish+0x0/
0x2c4 [bridge]
[<ffffffff81339a50>] ? nf_hook_slow+0x68/0xc8
[<ffffffffa027edaa>] ? br_nf_pre_routing_finish+0x0/0x2c4 [bridge]
[<ffffffffa027f616>] br_nf_pre_routing+0x5a8/0x5c7 [bridge]
[<ffffffff813399ab>] nf_iterate+0x48/0x85
[<ffffffffa027a931>] ? br_handle_frame_finish+0x0/0x154 [bridge]
[<ffffffff81339a50>] nf_hook_slow+0x68/0xc8
[<ffffffffa027a931>] ? br_handle_frame_finish+0x0/0x154 [bridge]
[<ffffffffa027ac36>] br_handle_frame+0x1b1/0x1db [bridge]
[<ffffffff8131d54b>] netif_receive_skb+0x316/0x434
[<ffffffff8131dbfb>] napi_gro_receive+0x6e/0x83
[<ffffffffa0125bfe>] e1000_receive_skb+0x5c/0x65 [e1000e]
[<ffffffffa0125de8>] e1000_clean_rx_irq+0x1e1/0x28f [e1000e]
[<ffffffffa012730e>] e1000_clean+0x99/0x24a [e1000e]
[<ffffffff813bcfc5>] ? _spin_unlock_irqrestore+0x2c/0x43
[<ffffffff8131ba62>] net_rx_action+0xb8/0x1b4
[<ffffffff8104ed43>] __do_softirq+0x99/0x152
[<ffffffff8101284c>] call_softirq+0x1c/0x30
[<ffffffff81013a02>] do_softirq+0x52/0xb9
[<ffffffff8104e969>] irq_exit+0x53/0x8d
[<ffffffff81013d1a>] do_IRQ+0x135/0x157
[<ffffffff81011f93>] ret_from_intr+0x0/0x2e
<EOI> [<ffffffff81017e20>] ? mwait_idle+0x9e/0xc7
[<ffffffff81017e17>] ? mwait_idle+0x95/0xc7
[<ffffffff813bfd20>] ? atomic_notifier_call_chain+0x13/0x15
[<ffffffff810102f4>] ? enter_idle+0x27/0x2>
Regards
senthil
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: Kernel panic
2008-04-21 10:56 ` Kernel panic Matthias Andersson
@ 2008-04-21 11:07 ` Bart Van Assche
0 siblings, 0 replies; 45+ messages in thread
From: Bart Van Assche @ 2008-04-21 11:07 UTC (permalink / raw)
To: Matthias Andersson; +Cc: linux-kernel
On Mon, Apr 21, 2008 at 12:56 PM, Matthias Andersson
<matthias.andersson@gmail.com> wrote:
> I upgraded to Ubuntu 8.04 (Hardy Heron) four days ago and with it the
> 2.6.24-16 kernel.
> The kernel worked fine until yesterday when I booted up the machine I
> was greeted by the following error message:
>
> /init: ./34: Can't open /scripts/functions
> [ 20.587228] kernel panic - not syncing: attempted to kill init!
>
> What could have caused this failiure?
> There were some upgrades installed before the final shutdown of the
> system (prior to the kernel panic) but nothing system-critical.
Hello Matthias,
This is an Ubuntu 8.04 issue, not a kernel issue. Please post this
issue in an Ubuntu forum.
Bart.
^ permalink raw reply [flat|nested] 45+ messages in thread
* Kernel panic
[not found] <9a5eeacd0804210350v79db27f0of73a29c55e2b7311@mail.gmail.com>
@ 2008-04-21 10:56 ` Matthias Andersson
2008-04-21 11:07 ` Bart Van Assche
0 siblings, 1 reply; 45+ messages in thread
From: Matthias Andersson @ 2008-04-21 10:56 UTC (permalink / raw)
To: linux-kernel
Hi!
I upgraded to Ubuntu 8.04 (Hardy Heron) four days ago and with it the
2.6.24-16 kernel.
The kernel worked fine until yesterday when I booted up the machine I
was greeted by the following error message:
/init: ./34: Can't open /scripts/functions
[ 20.587228] kernel panic - not syncing: attempted to kill init!
What could have caused this failiure?
There were some upgrades installed before the final shutdown of the
system (prior to the kernel panic) but nothing system-critical.
//Matthias Andersson
^ permalink raw reply [flat|nested] 45+ messages in thread
* kernel panic
@ 2006-08-24 18:01 febo
0 siblings, 0 replies; 45+ messages in thread
From: febo @ 2006-08-24 18:01 UTC (permalink / raw)
To: linux-kernel
Running a stock FC5 kernel with a P4 and HT enabled..
After 1 month uptime with no problems I get this out of the blue. The
system practically hanged, only ICMP was working, had to reboot.Could
it be related to cpuspeed or amavisd (the latter seems unlikely)... ?
Aug 24 12:43:07 mail kernel: Unable to handle kernel NULL pointer
dereference at virtual address 00000051
Aug 24 12:43:07 mail kernel: printing eip:
Aug 24 12:43:07 mail kernel: c01467fb
Aug 24 12:43:07 mail kernel: *pde = 03162001
Aug 24 12:43:07 mail kernel: Oops: 0000 [#1]
Aug 24 12:43:07 mail kernel: SMP
Aug 24 12:43:07 mail kernel: last sysfs file:
/devices/system/cpu/cpu0/cpufreq/scaling_setspeed
Aug 24 12:43:07 mail kernel: Modules linked [..]
Aug 24 12:43:07 mail kernel: CPU: 0
Aug 24 12:43:07 mail kernel: EIP: 0060:[<c01467fb>] Not tainted VLI
Aug 24 12:43:07 mail kernel: EFLAGS: 00210002 (2.6.15-1.2054_FC5smp #1)
[..]
Aug 24 12:43:07 mail kernel: Process amavisd (pid: 22608,
threadinfo=e9358000 task=f7d1ba30)
[..]
Aug 24 12:43:07 mail kernel: Call Trace:
Aug 24 12:43:07 mail kernel: [<c0163762>]
__find_get_block_slow+0x38/0x114 [<c016422c>]
[..]
Aug 24 12:43:08 mail kernel: Code: 89 d8 5a 5b 5e 5f 5d c3 57 56 53 89
c3 89 d6 8d 78 10 89 f8 e8 82 ba 1a 00 83 c3 04 89 f2 89 d8 e8 53 cb
08 00 89 c3 85 c0 74 10 <8b> 00 89 da f6 c4 40 74 03 8b 53 0c f0 ff 42
04 89 f8 e8 ef b9
Aug 24 12:43:08 mail kernel: Continuing in 120 seconds... Continuing
in 1 seconds.
Aug 24 12:43:08 mail kernel: <3>Debug: sleeping function called from invalid
[..]
^ permalink raw reply [flat|nested] 45+ messages in thread
* kernel panic
@ 2006-02-24 10:15 Rogel Miguez
0 siblings, 0 replies; 45+ messages in thread
From: Rogel Miguez @ 2006-02-24 10:15 UTC (permalink / raw)
To: webmaster
That I should make?
I have problems with the compiled kernel:
I compiled the kernel 2.6.13.4
with make allnocoonfig,
with make allyesconfig,
with make defconfig,
the LILO is generated automatically
and when I restart the computer, it shows me the following error:
kernel panic - not syncing : VFS : Unable to mount root fs on
unknown-block (0,0)
Rogel
-------------------------
Que debo hacer?
Tengo problemas con el kernel compilado:
Yo compilé el kernel 2.6.13.4
con make allnocoonfig,
con make allyesconfig,
con make defconfig,
se genera el LILO automaticamente
y cuando reinicio la computadora, me muestra el siguiente error.
kernel panic - not syncing : VFS : Unable to mount root fs on
unknown-block (0,0)
Rogel
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kernel panic
[not found] <4GLD8-5Wa-27@gated-at.bofh.it>
@ 2005-08-29 23:50 ` Robert Hancock
0 siblings, 0 replies; 45+ messages in thread
From: Robert Hancock @ 2005-08-29 23:50 UTC (permalink / raw)
To: linux-kernel
manomugdha biswas wrote:
> Hi,
> I am using the following makefile and the .c file to
> generate a kernel module. I can load this module
> without error and warning. But when I call ioctl()
> from user application to run this module it gets
> kernel panic!
I think there's something wrong with the way you're using the wait queue
(they're not normally instantiated as local variables on the stack, for
one thing). It looks like you're just using it to create a delay, in
that case use schedule_timeout, msleep, etc.
--
Robert Hancock Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@nospamshaw.ca
Home Page: http://www.roberthancock.com/
^ permalink raw reply [flat|nested] 45+ messages in thread
* kernel panic
@ 2005-08-29 6:43 manomugdha biswas
0 siblings, 0 replies; 45+ messages in thread
From: manomugdha biswas @ 2005-08-29 6:43 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 3113 bytes --]
Hi,
I am using the following makefile and the .c file to
generate a kernel module. I can load this module
without error and warning. But when I call ioctl()
from user application to run this module it gets
kernel panic!
I am using redhat 9.0 and kernel 2.4.20-8.
testmngmnt.c:
=============
This file has been attached with this mail.
Makefile:
=========
# set the approriate value for additional cflags
GCC_VER := $(strip $(shell gcc -dumpversion))
XTRA_CFLAGS =
ifeq ($(GCC_VER), 3.2.2)
XTRA_CFLAGS = -DRH_9_0
endif # GCC_VER
ifeq ($(GCC_VER), 3.2.3)
XTRA_CFLAGS = -DRH_9_0
endif # GCC_VER
CC = gcc
LD = ld
LDFLAG = -r
LINUX_VERSION = linux-$(shell uname -r)
CFLAGS = -g -Wall -DMODULE -O2 -D__KERNEL__
$(XTRA_CFLAGS) -DLINK_ETHERNET \
-I/usr/src/$(LINUX_VERSION)/include -I${INCLUDE}
-D__DEBUG__
dvr_objs = testmngmnt.o
test.o: ${dvr_objs}
ld -X -r -o test.o ${dvr_objs} ; \
testmngmnt.o: testmngmnt.c
${CC} ${CFLAGS} -c testmngmnt.c
clean:
rm -f *.o *~ include/*~
all: test.o
Kernel panic dump:
==================
Unable to handle kernel NULL pointer dereference at
virtual address 00000005
printing eip:
c0118ffd
*pde = 00000000
Oops: 0002
test soundcore ide-cd cdrom i830 agpgart parport_pc lp
parport cisco_ipsec autofs 8139too mii keybdev
mousedev hid input usb-uhci ehci-hcd usbcore ext3 jbd
CPU: 0
EIP: 0060:[<c0118ffd>] Tainted: P
EFLAGS: 00210086
EIP is at interruptible_sleep_on_timeout [kernel] 0x2d
(2.4.20-8)
eax: f4f31f78 ebx: 00200286 ecx: f4f31f50 edx:
00000001
esi: 00000002 edi: f5050300 ebp: f4f31f60 esp:
f4f31f48
ds: 0068 es: 0068 ss: 0068
Process vnicClientMirro (pid: 4971,
stackpage=f4f31000)
Stack: 00000000 f4f30000 f5113980 f5113980 0000001d
00000000 f4f31f90 f8fe60b8
f8fe615c 0000001d f5113fa4 f5113700 00000001
f4f31f7c f4f31f7c 00000000
00000002 ffffffe7 00000003 c01566e9 bfffd880
f5050300 00000000 bfffd880
Call Trace: [<f8fe60b8>] VNICClientStart [test] 0x58
(0xf4f31f64))
[<f8fe615c>] .rodata.str1.1 [test] 0x2c (0xf4f31f68))
[<c01566e9>] sys_ioctl [kernel] 0xc9 (0xf4f31f94))
[<c0109537>] system_call [kernel] 0x33 (0xf4f31fc0))
Code: 89 4a 04 89 55 f0 89 45 f4 89 08 89 f0 e8 a1 cb
00 00 89 c6
Could you please give some light on this issue?
Regards,
Manomugdhab
Manomugdha Biswas
_______________________________________________________
Too much spam in your inbox? Yahoo! Mail gives you the best spam protection for FREE! http://in.mail.yahoo.com
[-- Attachment #2: 3024876882-testmngmnt.c --]
[-- Type: application/octet-stream, Size: 2042 bytes --]
/*
Copyright (c) Ixia 2003-2005
All rights reserved.
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <net/tcp.h>
#include <linux/skbuff.h>
#include <asm/uaccess.h>
#include <linux/netdevice.h>
int sClientMajorNum = 0;
static int VNICClientIoctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg);
static int VNICClientStart(unsigned long arg);
static struct file_operations VNICFops = {
owner: THIS_MODULE,
ioctl: VNICClientIoctl
};
static int
VNICClientStart(unsigned long arg)
{
unsigned int retryCnt = 30;
DECLARE_WAIT_QUEUE_HEAD(wq);
init_waitqueue_head(&wq);
printk("\nretry count ----- : %d\n", retryCnt);
while (retryCnt) {
--retryCnt;
printk("\nretry count : %d\n", retryCnt);
if (!retryCnt) {
return -1;
}
/* wait for small */
printk("\n++++before sleep+++\n");
interruptible_sleep_on_timeout(&wq, 2);
printk("\n++++after sleep+++\n");
} /* end while (retryCnt)*/
return 0; /* for success */
} /* end VNICClientStart() */
static int
VNICClientIoctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
switch (cmd) {
//case VNIC_CLIENT_START:
case 0:
return VNICClientStart(arg);
break;
default :
return 0 ;
break;
} /* End of switch */
return 0; /* VNIC_IOCTL_SUCCESS */
}
int __init
VNICClientModuleInit(void)
{
/* register the character device */
sClientMajorNum = register_chrdev(0, "VNICClient", &VNICFops);
if (sClientMajorNum < 0) {
return -EIO;
}
return 0;
}
void
VNICClientModuleCleanUp(void)
{
/* unRegiter the character device(); */
unregister_chrdev(sClientMajorNum, "VNICClient");
}
module_init(VNICClientModuleInit);
module_exit(VNICClientModuleCleanUp);
#ifdef MODULE_LICENSE
MODULE_LICENSE("GPL");
#endif /* MODULE_LICENSE */
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kernel panic
2004-04-12 10:39 osmaker@hu
2004-04-12 10:43 ` osmaker@hu
@ 2004-04-12 12:26 ` Zwane Mwaikambo
1 sibling, 0 replies; 45+ messages in thread
From: Zwane Mwaikambo @ 2004-04-12 12:26 UTC (permalink / raw)
To: osmaker@hu; +Cc: linux-kernel
On Mon, 12 Apr 2004, osmaker@hu wrote:
> Hello everyone,
> I have got a kernel panic when running a heavy load socket processing.
> This server is written by my self and when the clients reached 10k,
> the panic occured. In the server code run 100 threads and every thread
> using poll on fds.
> I am a newbie on kernel ,can you tell me how to solve the
> problem?and how to analyze the panic when I come across it?
I recommend you upgrade your Redhat kernel (the one you're running is
pretty old) and if the problem still persists, file a bugreport at
http://bugzilla.redhat.com
Zwane
^ permalink raw reply [flat|nested] 45+ messages in thread
* kernel panic
2004-04-12 10:39 osmaker@hu
@ 2004-04-12 10:43 ` osmaker@hu
2004-04-12 12:26 ` Zwane Mwaikambo
1 sibling, 0 replies; 45+ messages in thread
From: osmaker@hu @ 2004-04-12 10:43 UTC (permalink / raw)
To: linux-kernel
Hello everyone,
I have got a kernel panic when running a heavy load socket processing.
This server is written by my self and when the clients reached 10k,
the panic occured. In the server code run 100 threads and every thread
using poll on fds.
I am a newbie on kernel ,can you tell me how to solve the
problem?and how to analyze the panic when I come across it?
the panic information:
ybdev mousedev hid input usb-uhci usbcore ext3jbd
CPU:0
EIP:0060:[<d08ab88e>] not tainted
EFLAGS:00010202
EIP is at rx_poll [sundance] 0x17e(2.4.20-8)
eax:00008000 ebx:00000000 ecx:ce611160 edx:00000014
esi:00008052 edi:00000000 ebp:00000052 esp:cffb7f80
ds:0068 es:0068 ss:0068
Process ksoftirqd_cpu0(pid:4, stackpage=cffb7000)
Stack:c06c8080 ce611000 c01f5eed 00000001 d08a6e00 0000000b 00000014 ce611160
0000000b c0370c18 fffffff7 00000246 c01217d6 ce611000 00000001 c0121685
c0370c18 cffb6000 cffb6000 cffb6000 00000000 c0121ab5 cffb62fe c025d9b1
Call Trace:[<c01f5eed>]process_blacklog[kernel]0x6d(0xcffb7f88))
[<c01217d6>]tasklet_action[kernel]0x46(0xcffb7fb0))
[<c0121685>]do_softirq[kernel]0x95(0xcffb7fbc))
[<c0121ab5>]ksoftirqd[kernel]0xa5(0xcffb7fd4))
[<c0121a10>]ksoftirqd[kernel]0x0(0xcffb7fe4))
[<c010742d>]kernel_thread_helper[kerlnel]0x5(0xcffb7ff0)
Code:8b 7b 60 8b 83 84 00 00 00 85 ff 0f 85 fe 01 00 01 6b 5c
<0> Kernel panic:Aiee, killing interrupt handler!
In interrupt handler - not syncing
Thank you very much!
--
Best regards,
osmaker mailto:osmaker@mailbox.hu
^ permalink raw reply [flat|nested] 45+ messages in thread
* kernel panic
@ 2004-04-12 10:39 osmaker@hu
2004-04-12 10:43 ` osmaker@hu
2004-04-12 12:26 ` Zwane Mwaikambo
0 siblings, 2 replies; 45+ messages in thread
From: osmaker@hu @ 2004-04-12 10:39 UTC (permalink / raw)
To: linux-kernel
Hello everyone,
I have got a kernel panic when running a heavy load socket processing.
This server is written by my self and when the clients reached 10k,
the panic occured. In the server code run 100 threads and every thread
using poll on fds.
I am a newbie on kernel ,can you tell me how to solve the
problem?and how to analyze the panic when I come across it?
the panic information:
ybdev mousedev hid input usb-uhci usbcore ext3jbd
CPU:0
EIP:0060:[<d08ab88e>] not tainted
EFLAGS:00010202
EIP is at rx_poll [sundance] 0x17e(2.4.20-8)
eax:00008000 ebx:00000000 ecx:ce611160 edx:00000014
esi:00008052 edi:00000000 ebp:00000052 esp:cffb7f80
ds:0068 es:0068 ss:0068
Process ksoftirqd_cpu0(pid:4, stackpage=cffb7000)
Stack:c06c8080 ce611000 c01f5eed 00000001 d08a6e00 0000000b 00000014 ce611160
0000000b c0370c18 fffffff7 00000246 c01217d6 ce611000 00000001 c0121685
c0370c18 cffb6000 cffb6000 cffb6000 00000000 c0121ab5 cffb62fe c025d9b1
Call Trace:[<c01f5eed>]process_blacklog[kernel]0x6d(0xcffb7f88))
[<c01217d6>]tasklet_action[kernel]0x46(0xcffb7fb0))
[<c0121685>]do_softirq[kernel]0x95(0xcffb7fbc))
[<c0121ab5>]ksoftirqd[kernel]0xa5(0xcffb7fd4))
[<c0121a10>]ksoftirqd[kernel]0x0(0xcffb7fe4))
[<c010742d>]kernel_thread_helper[kerlnel]0x5(0xcffb7ff0)
Code:8b 7b 60 8b 83 84 00 00 00 85 ff 0f 85 fe 01 00 01 6b 5c
<0> Kernel panic:Aiee, killing interrupt handler!
In interrupt handler - not syncing
Thank you very much!
--
Best regards,
osmaker mailto:osmaker@mailbox.hu
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: Kernel panic...
2003-12-05 14:19 ` William Lee Irwin III
@ 2003-12-06 5:47 ` William Lee Irwin III
0 siblings, 0 replies; 45+ messages in thread
From: William Lee Irwin III @ 2003-12-06 5:47 UTC (permalink / raw)
To: neel vanan, linux-kernel
On Fri, Dec 05, 2003 at 01:34:35AM -0800, neel vanan wrote:
>> Mounting root filesystem
>> mount : erro 6 mounting ext3
>> pivotroot : pivot_root (/sysroot, /sysroot/initrd)
>> failed:2
>> umount /initrd/proc failed :2
>> Mounting devfs on /dev
>> freeing unused kernel memory : 464k freed
>> Kernel panic: no init found. Try passing init= option
>> to kernel
>> After then blinking cursor.
On Fri, Dec 05, 2003 at 06:19:28AM -0800, William Lee Irwin III wrote:
> Could you post your .config?
Okay, the first thing to try is removing devfs from the equation if
possible. Your mount is getting back -ENXIO, suggesting whatever device
you're trying to mount doesn't exist according to the kernel. devfs
does device management internally to the kernel, so it's a likely culprit.
It would also be helpful to find the command-line arguments issued to
mount(8) when it's failing, as well as more information about the
contents of your initrd. Can you boot without an initrd?
-- wli
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: Kernel panic...
2003-12-05 9:34 ` Kernel panic neel vanan
@ 2003-12-05 14:19 ` William Lee Irwin III
2003-12-06 5:47 ` William Lee Irwin III
0 siblings, 1 reply; 45+ messages in thread
From: William Lee Irwin III @ 2003-12-05 14:19 UTC (permalink / raw)
To: neel vanan; +Cc: linux-kernel
On Fri, Dec 05, 2003 at 01:34:35AM -0800, neel vanan wrote:
> Mounting root filesystem
> mount : erro 6 mounting ext3
> pivotroot : pivot_root (/sysroot, /sysroot/initrd)
> failed:2
> umount /initrd/proc failed :2
> Mounting devfs on /dev
> freeing unused kernel memory : 464k freed
> Kernel panic: no init found. Try passing init= option
> to kernel
> After then blinking cursor.
Could you post your .config?
-- wli
^ permalink raw reply [flat|nested] 45+ messages in thread
* Kernel panic...
[not found] <S263478AbTLEJ0s/20031205092648Z+878@vger.kernel.org>
@ 2003-12-05 9:34 ` neel vanan
2003-12-05 14:19 ` William Lee Irwin III
0 siblings, 1 reply; 45+ messages in thread
From: neel vanan @ 2003-12-05 9:34 UTC (permalink / raw)
To: linux-kernel
Hi,
currently i am compiling kernel 2.6.0-test11, After
making kernel image and installing new module when i
boot with new kernel image i am getting this error:
Red Hat nash version 3.4.42 starting
Loading sd_mod.ko module
Loading aic79xx.ko module
scsi0: Adaptec AIC79xx PCI-X SCSI HBA DRIVER, Rev
1.3.9
.....................................
scsi0:A:0:0: Tagged Queing enabled, Depth 32
scsi device sda: drive cache: write back
/dev/scsi/host0/bus0/target0/lun0: unknown partition
table
Attached scsi disk sda at scsi0, channel0, id0, lun0
mounting /proc file system
creating block devices
creating Root devices
Mounting root filesystem
mount : erro 6 mounting ext3
pivotroot : pivot_root (/sysroot, /sysroot/initrd)
failed:2
umount /initrd/proc failed :2
Mounting devfs on /dev
freeing unused kernel memory : 464k freed
Kernel panic: no init found. Try passing init= option
to kernel
After then blinking cursor.
#Entries in grub.conf is:
title Red Hat Linux (2.6.0)
root (hd0,0)
kernel /vmlinux2.6.0 ro root=/dev/sda3
initrd /initrd-2.6.0.img
#
also i had tried append="hdc=ide-scsi root=LABEL=/"
and append="hdc=ide-scsi root=/dev/sda3"
<content of /etc/fstab>
LABEL=/ / ext3 defaults 1 1
LABEL=/boot /boot ext3 defaults 1 2
none /dev/pts devpts gid=5,mode=620 0 0
none /proc proc defaults 0 0
none /dev/shm tmpfs defaults 0 0
/dev/sda2 swap swap defaults 0 0
/dev/cdrom /mnt/cdrom udf,iso9660
noauto,owner,kudzu,ro 0 0
/dev/fd0 /mnt/floppy auto noauto,owner,kudzu 0 0
Please let me know where i am wrong.
Thanks.
Neel
__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/
^ permalink raw reply [flat|nested] 45+ messages in thread
* Kernel Panic
@ 2003-03-26 20:22 David van Hoose
2003-03-26 11:28 ` dan carpenter
0 siblings, 1 reply; 45+ messages in thread
From: David van Hoose @ 2003-03-26 20:22 UTC (permalink / raw)
To: linux-kernel; +Cc: torvalds
[-- Attachment #1: Type: text/plain, Size: 864 bytes --]
I booted my system with 2.5.66-bk1 and switched every 3 minutes between
init 5 and init 3. This resulted in several faults from anything that
was run at the time. Attached is the latest dmesg with the faults from
uname and X at the end. Also attached is a panic that has an unknown
process. It looked like a buffer overrun. The ? characters are
replacements for the high-ascii characters that I couldn't type.
I hope this can be fixed. I can reproduce the locking and crashing, but
each time it is something different that dies. Sometimes I get a kernel
panic, but it reboots itself before I can write anything down.
This problem started after I began using 2.5.66. I first noticed it when
I would exit KDE before reboots. Things would lock up. Turned NMI
watchdog on as I was instructed.
Regards,
David
PS. I have also included my config for 2.5.66
[-- Attachment #2: config-2.5.66-bk1 --]
[-- Type: text/plain, Size: 10599 bytes --]
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_EXPERIMENTAL=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_KMOD=y
CONFIG_X86_PC=y
CONFIG_MPENTIUM4=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_PREFETCH=y
CONFIG_X86_SSE2=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_MICROCODE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_EDD=m
CONFIG_HIGHMEM4G=y
CONFIG_HIGHMEM=y
CONFIG_HIGHPTE=y
CONFIG_MTRR=y
CONFIG_PM=y
CONFIG_ACPI=y
CONFIG_ACPI_HT_ONLY=y
CONFIG_ACPI_BOOT=y
CONFIG_APM=y
CONFIG_APM_CPU_IDLE=y
CONFIG_PCI=y
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_NAMES=y
CONFIG_HOTPLUG=y
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
CONFIG_PARPORT_SERIAL=y
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
CONFIG_PNP_NAMES=y
CONFIG_PNPBIOS=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=y
CONFIG_BLK_DEV_CMD640=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_PCI_WIP=y
CONFIG_BLK_DEV_ADMA=y
CONFIG_BLK_DEV_PDC202XX_OLD=y
CONFIG_BLK_DEV_PDC202XX_NEW=y
CONFIG_PDC202XX_FORCE=y
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_SIS5513=y
CONFIG_IDEDMA_AUTO=y
CONFIG_BLK_DEV_PDC202XX=y
CONFIG_BLK_DEV_IDE_MODES=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_PPA=y
CONFIG_SCSI_IMM=m
CONFIG_IEEE1394=m
CONFIG_IEEE1394_OHCI1394=m
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_CMP=m
CONFIG_IEEE1394_AMDTP=m
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=y
CONFIG_NETFILTER=y
CONFIG_FILTER=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_XFRM_USER=y
CONFIG_IP_NF_CONNTRACK=y
CONFIG_IP_NF_FTP=y
CONFIG_IP_NF_IRC=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_UNCLEAN=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_PHYSDEV=m
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_MIRROR=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AHESP=m
CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
CONFIG_IPV6_SCTP__=y
CONFIG_VLAN_8021Q=m
CONFIG_LLC=y
CONFIG_LLC_UI=y
CONFIG_IPX=y
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=y
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_BRIDGE=m
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_NET_ETHERNET=y
CONFIG_NET_TULIP=y
CONFIG_TULIP=y
CONFIG_NET_PCI=y
CONFIG_SIS900=y
CONFIG_INPUT=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_GAMEPORT=y
CONFIG_SOUND_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_SERIAL=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
CONFIG_INPUT_UINPUT=m
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=2048
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_BUSMOUSE=y
CONFIG_HW_RANDOM=m
CONFIG_NVRAM=m
CONFIG_RTC=y
CONFIG_AGP=m
CONFIG_AGP3=y
CONFIG_AGP_INTEL=m
CONFIG_AGP_VIA=m
CONFIG_AGP_AMD=m
CONFIG_AGP_SIS=m
CONFIG_AGP_ALI=m
CONFIG_AGP_AMD_8151=m
CONFIG_AGP_I7505=m
CONFIG_RAW_DRIVER=m
CONFIG_HANGCHECK_TIMER=m
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_PROC_FS=y
CONFIG_DEVPTS_FS=y
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_HFS_FS=m
CONFIG_HPFS_FS=y
CONFIG_SMB_FS=y
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_PARTITION_ADVANCED=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=y
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_SOUND=m
CONFIG_SND=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_USB_AUDIO=m
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_AUDIO=m
CONFIG_USB_BLUETOOTH_TTY=m
CONFIG_USB_MIDI=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_HP8200e=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
CONFIG_USB_XPAD=m
CONFIG_USB_MDC800=m
CONFIG_USB_SCANNER=m
CONFIG_USB_MICROTEK=m
CONFIG_USB_HPUSBSCSI=m
CONFIG_USB_DABUSB=m
CONFIG_USB_CATC=m
CONFIG_USB_CDCETHER=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y
CONFIG_USB_EMI26=m
CONFIG_USB_TIGL=y
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_BRLVGER=m
CONFIG_USB_LCD=m
CONFIG_PROFILING=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_KALLSYMS=y
CONFIG_FRAME_POINTER=y
CONFIG_X86_EXTRA_IRQS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_AES=y
CONFIG_CRC32=m
CONFIG_ZLIB_INFLATE=y
CONFIG_X86_BIOS_REBOOT=y
[-- Attachment #3: dmesg-2.5.66-bk1 --]
[-- Type: text/plain, Size: 15295 bytes --]
].
Initializing Cryptographic API
pty: 2048 Unix98 ptys configured
request_module: failed /sbin/modprobe -- parport_lowlevel. error = -16
lp: driver loaded but no devices found
Real Time Clock Driver v1.11
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
lp0: using parport0 (interrupt-driven).
lp0: console ready
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
sis900.c: v1.08.06 9/24/2002
eth0: Realtek RTL8201 PHY transceiver found at address 1.
eth0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0x9800, IRQ 9, 00:e0:18:9d:4f:d0.
Linux Tulip driver version 1.1.13 (May 11, 2002)
eth1: ADMtek Comet rev 17 at 0x9400, 00:20:78:04:68:6F, IRQ 9.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SiS648 ATA 133 controller
ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:DMA, hdd:pio
hda: Maxtor 6Y080P0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: ASUS CD-S500/A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 160086528 sectors (81964 MB) w/7936KiB Cache, CHS=158816/16/63, UDMA(133)
hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
end_request: I/O error, dev hdc, sector 0
hdc: ATAPI 50X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
end_request: I/O error, dev hdc, sector 0
ide-floppy driver 0.99.newide
ppa: Version 2.07 (for Linux 2.4.x)
ppa: Found device at ID 6, Attempting to use EPP 32 bit
ppa: Communication established with ID 6 using EPP 32 bit
scsi0 : Iomega VPI0 (ppa) interface
Vendor: IOMEGA Model: ZIP 100 Rev: D.09
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi0, channel 0, id 6, lun 0
ehci-hcd 00:03.3: Silicon Integrated S SiS7002 USB 2.0
ehci-hcd 00:03.3: irq 9, pci mem e0811000
Please use the 'usbfs' filetype instead, the 'usbdevfs' name is deprecated.
ehci-hcd 00:03.3: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 00:03.3
ehci-hcd 00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jan-22
hub 1-0:0: USB hub found
hub 1-0:0: 6 ports detected
ohci-hcd: 2003 Feb 24 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci-hcd: block sizes: ed 64 td 64
ohci-hcd 00:03.0: Silicon Integrated S 7001
ohci-hcd 00:03.0: irq 9, pci mem e0813000
ohci-hcd 00:03.0: new USB bus registered, assigned bus number 2
hub 2-0:0: USB hub found
hub 2-0:0: 2 ports detected
ohci-hcd 00:03.1: Silicon Integrated S 7001 (#2)
ohci-hcd 00:03.1: irq 9, pci mem e0815000
ohci-hcd 00:03.1: new USB bus registered, assigned bus number 3
hub 3-0:0: USB hub found
hub 3-0:0: 2 ports detected
ohci-hcd 00:03.2: Silicon Integrated S 7001 (#3)
ohci-hcd 00:03.2: irq 9, pci mem e0817000
ohci-hcd 00:03.2: new USB bus registered, assigned bus number 4
hub 4-0:0: USB hub found
hub 4-0:0: 2 ports detected
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.0
drivers/usb/core/usb.c: registered new driver hiddev
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
drivers/usb/core/usb.c: registered new driver tiglusb
drivers/usb/misc/tiglusb.c: TI-GRAPH LINK USB (aka SilverLink) driver, version 1.06
mice: PS/2 mouse device common for all mice
input: PC Speaker
gameport: NS558 PnP at pnp00:06 io 0x200 size 8 speed 784 kHz
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
LLC 2.0 by Procom, 1997, Arnaldo C. Melo, 2001, 2002
NET 4.0 IEEE 802.2 extended support
NET4.0 IEEE 802.2 BSD sockets, Jay Schulist, 2001, Arnaldo C. Melo, 2002
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 300 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
Initializing IPsec netlink socket
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2002 Netfilter core team
NET4: Linux IPX 0.50 for NET4.0
IPX Portions Copyright (c) 1995 Caldera, Inc.
IPX Portions Copyright (c) 2000-2002 Conectiva, Inc.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 201k freed
VFS: Mounted root (ext2 filesystem).
hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x501
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
(fs/jbd/recovery.c, 253): journal_recover: JBD: recovery, exit status 0, recovered transactions 233998 to 234012
(fs/jbd/recovery.c, 255): journal_recover: JBD: Replayed 400 and revoked 0/1 blocks
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 136k freed
hub 2-0:0: debounce: port 1: delay 100ms stable 4 status 0x301
hub 2-0:0: new USB device on port 1, assigned address 2
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-00:03.0-1
Please use the 'usbfs' filetype instead, the 'usbdevfs' name is deprecated.
EXT3 FS 2.4-0.9.16, 02 Dec 2001 on ide0(3,2), internal journal
Adding 1004020k swap on /dev/hda6. Priority:-1 extents:1
intel8x0: clocking to 48000
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.16, 02 Dec 2001 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ohci1394: $Rev: 801 $ Ben Collins <bcollins@debian.org>
ohci1394_0: Unexpected PCI resource length of 1000!
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[de800000-de8007ff] Max Packet=[2048]
ieee1394: Host added: ID:BUS[00:1023] GUID[00e018000006d3df] [Unknown] (Linux OHCI-1394)
Disabled Privacy Extensions on device c03ca500(lo)
eth0: Media Link On 100mbps full-duplex
microcode: CPU0 no microcode found! (sig=f24, pflags=4)
eth0: no IPv6 routers present
warning: process `update' used the obsolete bdflush system call
Fix your initscripts?
warning: process `update' used the obsolete bdflush system call
Fix your initscripts?
microcode: CPU0 no microcode found! (sig=f24, pflags=4)
nvidia: no version magic, tainting kernel.
nvidia: module license 'unspecified' taints kernel.
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4191 Mon Dec 9 11:49:01 PST 2002
Linux agpgart interface v0.100 (c) Dave Jones
0: NVRM: AGPGART: unable to retrieve symbol table
Unable to handle kernel paging request at virtual address db608000
printing eip:
c013bfb2
*pde = 1b4001e3
Oops: 0002 [#1]
CPU: 0
EIP: 0060:[<c013bfb2>] Tainted: PF
EFLAGS: 00010206
EIP is at do_anonymous_page+0x9e/0x202
eax: 00000000 ebx: 00000000 ecx: 00000400 edx: db608000
esi: c1447140 edi: db608000 ebp: dc8ffed4 esp: dc8ffeb8
ds: 007b es: 007b ss: 0068
Process uname (pid: 1054, threadinfo=dc8fe000 task=dfcd2780)
Stack: c1447140 00000003 00000001 db2a5780 da3d1400 40015000 dcc80c80 dc8fff04
c013c5c0 dcc80c80 dcf19700 db248054 da3d1400 00000001 40015000 c013d282
dcc80c80 dcc80ca0 40015000 dc8fffb4 c0118dcd dcc80c80 dcf19700 40015000
Call Trace:
[<c013c5c0>] handle_mm_fault+0xe6/0x15e
[<c013d282>] __vma_link+0x38/0x9e
[<c0118dcd>] do_page_fault+0x131/0x430
[<c013d9b6>] do_mmap_pgoff+0x3ca/0x670
[<c0110577>] sys_mmap2+0x77/0xa8
[<c0118c9c>] do_page_fault+0x0/0x430
[<c010b5bd>] error_code+0x2d/0x38
Code: f3 ab 89 14 24 c7 44 24 04 03 00 00 00 e8 04 db fd ff 8b 55
<6>note: uname[1054] exited with preempt_count 1
bad: scheduling while atomic!
Call Trace:
[<c011a58d>] schedule+0x329/0x32e
[<c013b02b>] unmap_vmas+0x1c5/0x222
[<c013e752>] exit_mmap+0x76/0x172
[<c011b8e4>] mmput+0x3e/0x80
[<c011f0d9>] do_exit+0xf9/0x310
[<c010bb52>] do_divide_error+0x0/0xde
[<c0118edf>] do_page_fault+0x243/0x430
[<c0135b81>] do_page_cache_readahead+0x77/0x136
[<c0135cae>] page_cache_readahead+0x6e/0x17a
[<c0133fcf>] buffered_rmqueue+0x93/0xfc
[<c0118c9c>] do_page_fault+0x0/0x430
[<c010b5bd>] error_code+0x2d/0x38
[<c013bfb2>] do_anonymous_page+0x9e/0x202
[<c013c5c0>] handle_mm_fault+0xe6/0x15e
[<c013d282>] __vma_link+0x38/0x9e
[<c0118dcd>] do_page_fault+0x131/0x430
[<c013d9b6>] do_mmap_pgoff+0x3ca/0x670
[<c0110577>] sys_mmap2+0x77/0xa8
[<c0118c9c>] do_page_fault+0x0/0x430
[<c010b5bd>] error_code+0x2d/0x38
microcode: CPU0 no microcode found! (sig=f24, pflags=4)
microcode: CPU0 no microcode found! (sig=f24, pflags=4)
0: NVRM: AGPGART: unable to retrieve symbol table
microcode: CPU0 no microcode found! (sig=f24, pflags=4)
microcode: CPU0 no microcode found! (sig=f24, pflags=4)
0: NVRM: AGPGART: unable to retrieve symbol table
general protection fault: 0000 [#2]
CPU: 0
EIP: 0060:[<c0140192>] Tainted: PF
EFLAGS: 00013286
EIP is at page_remove_rmap+0xbc/0x12e
eax: ffffffff ebx: dba82300 ecx: ffffffff edx: 0000001f
esi: c141ccb0 edi: 00000000 ebp: db591e94 esp: db591e78
ds: 007b es: 007b ss: 0068
Process X (pid: 1464, threadinfo=db590000 task=da5b1880)
Stack: dba8104c ffffffff dba82300 1ba8104c c14416c8 dba8104c c141ccb0 db591ed4
c013b93f c1452428 00000007 c14416f0 da51e000 0000004c db3c5000 dd2ad500
db591ed4 c14416c8 db6c8b00 c141ccb0 da9fa400 400130b0 dd2ad500 db591f04
Call Trace:
[<c013b93f>] do_wp_page+0x23d/0x342
[<c013c629>] handle_mm_fault+0x14f/0x15e
[<c0118dcd>] do_page_fault+0x131/0x430
[<c0118c9c>] do_page_fault+0x0/0x430
[<c010b5bd>] error_code+0x2d/0x38
Code: 8b 01 85 c0 89 45 e8 74 03 0f 18 00 31 d2 8b 44 91 04 85 c0
<6>note: X[1464] exited with preempt_count 1
bad: scheduling while atomic!
Call Trace:
[<c011a58d>] schedule+0x329/0x32e
[<c013b02b>] unmap_vmas+0x1c5/0x222
[<c013e752>] exit_mmap+0x76/0x172
[<c011b8e4>] mmput+0x3e/0x80
[<c011f0d9>] do_exit+0xf9/0x310
[<c010c23c>] do_general_protection+0x0/0x94
[<c010bb52>] do_divide_error+0x0/0xde
[<c010c284>] do_general_protection+0x48/0x94
[<c010b5bd>] error_code+0x2d/0x38
[<c0140192>] page_remove_rmap+0xbc/0x12e
[<c013b93f>] do_wp_page+0x23d/0x342
[<c013c629>] handle_mm_fault+0x14f/0x15e
[<c0118dcd>] do_page_fault+0x131/0x430
[<c0118c9c>] do_page_fault+0x0/0x430
[<c010b5bd>] error_code+0x2d/0x38
bad: scheduling while atomic!
Call Trace:
[<c011a58d>] schedule+0x329/0x32e
[<c013b02b>] unmap_vmas+0x1c5/0x222
[<c013e752>] exit_mmap+0x76/0x172
[<c011b8e4>] mmput+0x3e/0x80
[<c011f0d9>] do_exit+0xf9/0x310
[<c010c23c>] do_general_protection+0x0/0x94
[<c010bb52>] do_divide_error+0x0/0xde
[<c010c284>] do_general_protection+0x48/0x94
[<c010b5bd>] error_code+0x2d/0x38
[<c0140192>] page_remove_rmap+0xbc/0x12e
[<c013b93f>] do_wp_page+0x23d/0x342
[<c013c629>] handle_mm_fault+0x14f/0x15e
[<c0118dcd>] do_page_fault+0x131/0x430
[<c0118c9c>] do_page_fault+0x0/0x430
[<c010b5bd>] error_code+0x2d/0x38
bad: scheduling while atomic!
Call Trace:
[<c011a58d>] schedule+0x329/0x32e
[<c013b02b>] unmap_vmas+0x1c5/0x222
[<c013e752>] exit_mmap+0x76/0x172
[<c011b8e4>] mmput+0x3e/0x80
[<c011f0d9>] do_exit+0xf9/0x310
[<c010c23c>] do_general_protection+0x0/0x94
[<c010bb52>] do_divide_error+0x0/0xde
[<c010c284>] do_general_protection+0x48/0x94
[<c010b5bd>] error_code+0x2d/0x38
[<c0140192>] page_remove_rmap+0xbc/0x12e
[<c013b93f>] do_wp_page+0x23d/0x342
[<c013c629>] handle_mm_fault+0x14f/0x15e
[<c0118dcd>] do_page_fault+0x131/0x430
[<c0118c9c>] do_page_fault+0x0/0x430
[<c010b5bd>] error_code+0x2d/0x38
bad: scheduling while atomic!
Call Trace:
[<c011a58d>] schedule+0x329/0x32e
[<c013b02b>] unmap_vmas+0x1c5/0x222
[<c013e752>] exit_mmap+0x76/0x172
[<c011b8e4>] mmput+0x3e/0x80
[<c011f0d9>] do_exit+0xf9/0x310
[<c010c23c>] do_general_protection+0x0/0x94
[<c010bb52>] do_divide_error+0x0/0xde
[<c010c284>] do_general_protection+0x48/0x94
[<c010b5bd>] error_code+0x2d/0x38
[<c0140192>] page_remove_rmap+0xbc/0x12e
[<c013b93f>] do_wp_page+0x23d/0x342
[<c013c629>] handle_mm_fault+0x14f/0x15e
[<c0118dcd>] do_page_fault+0x131/0x430
[<c0118c9c>] do_page_fault+0x0/0x430
[<c010b5bd>] error_code+0x2d/0x38
bad: scheduling while atomic!
Call Trace:
[<c011a58d>] schedule+0x329/0x32e
[<c013b02b>] unmap_vmas+0x1c5/0x222
[<c013e752>] exit_mmap+0x76/0x172
[<c011b8e4>] mmput+0x3e/0x80
[<c011f0d9>] do_exit+0xf9/0x310
[<c010c23c>] do_general_protection+0x0/0x94
[<c010bb52>] do_divide_error+0x0/0xde
[<c010c284>] do_general_protection+0x48/0x94
[<c010b5bd>] error_code+0x2d/0x38
[<c0140192>] page_remove_rmap+0xbc/0x12e
[<c013b93f>] do_wp_page+0x23d/0x342
[<c013c629>] handle_mm_fault+0x14f/0x15e
[<c0118dcd>] do_page_fault+0x131/0x430
[<c0118c9c>] do_page_fault+0x0/0x430
[<c010b5bd>] error_code+0x2d/0x38
bad: scheduling while atomic!
Call Trace:
[<c011a58d>] schedule+0x329/0x32e
[<c013b02b>] unmap_vmas+0x1c5/0x222
[<c013e752>] exit_mmap+0x76/0x172
[<c011b8e4>] mmput+0x3e/0x80
[<c011f0d9>] do_exit+0xf9/0x310
[<c010c23c>] do_general_protection+0x0/0x94
[<c010bb52>] do_divide_error+0x0/0xde
[<c010c284>] do_general_protection+0x48/0x94
[<c010b5bd>] error_code+0x2d/0x38
[<c0140192>] page_remove_rmap+0xbc/0x12e
[<c013b93f>] do_wp_page+0x23d/0x342
[<c013c629>] handle_mm_fault+0x14f/0x15e
[<c0118dcd>] do_page_fault+0x131/0x430
[<c0118c9c>] do_page_fault+0x0/0x430
[<c010b5bd>] error_code+0x2d/0x38
general protection fault: 0000 [#3]
CPU: 0
EIP: 0060:[<c0140192>] Tainted: PF
EFLAGS: 00013286
EIP is at page_remove_rmap+0xbc/0x12e
eax: ffffffff ebx: dba82300 ecx: ffffffff edx: 0000001f
esi: c146ffa0 edi: 00000000 ebp: da3bbb64 esp: da3bbb48
ds: 007b es: 007b ss: 0068
Process X (pid: 1465, threadinfo=da3ba000 task=da5b1880)
Stack: da6ae360 ffffffff dba82300 1a6ae360 da6ae360 00090000 00166000 da3bbb94
c013ad1b c146ee48 00000007 da3bbbc0 da3bbba4 c146ffa0 1c664005 c0434894
da9fa084 08448000 081ae000 da3bbbbc c013ade2 c0434894 da9fa080 08048000
Call Trace:
[<c013ad1b>] zap_pte_range+0x15b/0x1d6
[<c013ade2>] zap_pmd_range+0x4c/0x68
[<c013ae3f>] unmap_page_range+0x41/0x68
[<c013af38>] unmap_vmas+0xd2/0x222
[<c013e752>] exit_mmap+0x76/0x172
[<c011b8e4>] mmput+0x3e/0x80
[<c0150882>] exec_mmap+0x8e/0xf2
[<c015094a>] flush_old_exec+0x1a/0x6e8
[<c01507e6>] kernel_read+0x4a/0x58
[<c016a5df>] load_elf_binary+0x2f7/0xc5a
[<c01340bb>] __alloc_pages+0x83/0x2aa
[<c01eaa2a>] __copy_from_user_ll+0x70/0x76
[<c015138c>] search_binary_handler+0x104/0x1a8
[<c01515b4>] do_execve+0x184/0x1c8
[<c0109697>] sys_execve+0x4b/0x7a
[<c010ab93>] syscall_call+0x7/0xb
Code: 8b 01 85 c0 89 45 e8 74 03 0f 18 00 31 d2 8b 44 91 04 85 c0
<6>note: X[1465] exited with preempt_count 1
[-- Attachment #4: panic.txt --]
[-- Type: text/plain, Size: 1093 bytes --]
EFLAGS: 00010893
EIP is at scheduler_tick+0x96/0x2b8
eax: 74684769 ebx: 00000000 ecx: 00000000 edx: 00000003
esi: d0042444 edi: 00000001 ebp: c0429e8c esp: c0429e74
ds: 007b es: 007b ss: 0068
Process: :???:?<`"^,?:d`9l?`9MF`8??`6?k?6???5?V`5JE?5H?`4M%?3?B`Tim Powers <timp@redhat.com> (pid: 543519605, threadinfo=c0428000 task=d0042444)
Stack: 00000000 00000000 c0461974 00000000 00000001 c0429f24 c0429eac c0123e9c
00000000 00000001 00000001 00000000 c0429f24 20000001 c0429ebc c012401f
00000000 c0429f24 c0429ed8 c0110202 c0429f24 c038b21c c038abc0 20000001
Call Trace:
[<c0123e9c>] update_process_times+0x46/0x50
[<c012401f>] do_timer+0x35/0xee
[<c0110202>] timer_interrupt+0x62/0x106
[<c010cb59>] handle_IRQ_event+0x37/0x5e
[<c010ccd6>] do_IRQ+0x80/0xd6
[<c010b500>] common_interrupt+0x18/0x20
[<c011007b>] set_rtc_mmss+0x5f/0x184
[<c010bb4d>] die+0x7d/0x82
[<c0118edf>] do_page_fault+0x243/0x430
Code: 0f ab 50 08 83 c4 0c 5b 5e 5f 5d c3 8b 46 2c 85 c0 74 06 83
<0>Kernel panic: Aiee, killing interrupt handler!
In interrupt handler - not syncing
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: Kernel Panic
2003-03-26 20:22 Kernel Panic David van Hoose
@ 2003-03-26 11:28 ` dan carpenter
0 siblings, 0 replies; 45+ messages in thread
From: dan carpenter @ 2003-03-26 11:28 UTC (permalink / raw)
To: David van Hoose, linux-kernel; +Cc: torvalds
On Wednesday 26 March 2003 09:22 pm, David van Hoose wrote:
> nvidia: no version magic, tainting kernel.
> nvidia: module license 'unspecified' taints kernel.
> 0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4191 Mon
Looks like an nvidia bug. The source for that isn't available so you
should direct bug reports to their web site.
regards,
dan carpenter
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: Kernel panic
2002-04-06 4:16 Kernel panic Daniel Mundy
@ 2002-04-06 18:05 ` Alan Cox
0 siblings, 0 replies; 45+ messages in thread
From: Alan Cox @ 2002-04-06 18:05 UTC (permalink / raw)
To: Daniel Mundy; +Cc: Linux Kernel Mailing List
> These are the messages I see on my terminal, I cannot see any more as this is the highest mode my monitor can support:
>
> -------------------------
> <1>Unable to handle kernel NULL pointer deference at virtual address 00000000
> Oops: 0000
> CPU: 0
> EIP: 0010:[<00000000>] Tainted: P
What binary only modules do you have loaded given the tainted marker
is set ?
^ permalink raw reply [flat|nested] 45+ messages in thread
* Kernel panic
@ 2002-04-06 4:16 Daniel Mundy
2002-04-06 18:05 ` Alan Cox
0 siblings, 1 reply; 45+ messages in thread
From: Daniel Mundy @ 2002-04-06 4:16 UTC (permalink / raw)
To: Linux Kernel Mailing List
Hi,
Lately I am having kernel panic's, and I have no idea why.. I have not changed anything lately except for regular
software updates. I am using Debian Woody 3.0, packages updated daily, with a 2.4.18 kernel. I have not noticed any
pattern in occurance, the other day it happened just after I dialed my ISP, about 20 minutes ago I was simply using
vim from my windows box via ssh, and just now I had it freeze again after typing `vim .<tab>`..
I also noticed that on reboot, it presents me with "(none) login:" rather than using my hostname of xion as per
usual.. an `ifconfig` shows nothing, ifconfig simply lists lo, and no eth0. Another reboot fixes this. This has only
happened once, I just had another kernel panic and this time on reboot my network is fine, so I am not sure whether
this is related.
These are the messages I see on my terminal, I cannot see any more as this is the highest mode my monitor can support:
-------------------------
<1>Unable to handle kernel NULL pointer deference at virtual address 00000000
printing eip:
000000
*pde = 000000
Oops: 0000
CPU: 0
EIP: 0010:[<00000000>] Tainted: P
EFLAGS: 00010246
eax: 00000000 ebx: c6af3b40 ecx: c52df1eo edx: 00000014
esi: c6af3c78 edi: c6d530bc ebp: c6af3c78 esp: c030dd9c
ds: 0018 es: 0018 ss: 0018
Process Swapper (pid: 0, stackpage=c030d000)
Stack: c02636oe c6af3b40 c6d530bc 00000014 c52df1e0 61f6f8a5 c6af3b40 c52df640
(more lines of this, my monitor is almost dead so was hard to read, if it is needed though I can find it out the next
time this problem occurs)
Call Trace: [<c026360e>] [<c0265bd6>] (etc, see above)
Code: Bad EIP value.
<0>Kernel panic: Aiee, killing interrupt handler!
In interrupt handler - not syncing
-------------------------
I asked around a bit on IRC and it was suggested I try asking here as this seems a kernel related problem. Thanks for
any help you can offer, if any more information about my situation is required let me know.
Regards,
Daniel Mundy
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kernel panic
2002-02-19 18:27 kernel panic chiranjeevi vaka
2002-02-19 18:50 ` Justin Carlson
@ 2002-02-21 17:17 ` Fernando Korndorfer
1 sibling, 0 replies; 45+ messages in thread
From: Fernando Korndorfer @ 2002-02-21 17:17 UTC (permalink / raw)
To: chiranjeevi vaka; +Cc: LKML
Are you trying to mount a SCSI disk as root without having the correct SCSI
driver IN the kernel?
just a gues...
-----------------------------------------------
Fernando Korndorfer
Novo Hamburgo, RS, Brasil
-----------------------------------------------
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kernel panic
2002-02-19 18:27 kernel panic chiranjeevi vaka
@ 2002-02-19 18:50 ` Justin Carlson
2002-02-21 17:17 ` Fernando Korndorfer
1 sibling, 0 replies; 45+ messages in thread
From: Justin Carlson @ 2002-02-19 18:50 UTC (permalink / raw)
To: chiranjeevi vaka; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 855 bytes --]
> The problem is while booting the kernel with my newly
> developed floppy, I am getting the error message
>
> kernel panic: VFS: Unable to mount root fs on 08:03
>
> I donno what to do. Is it some thing related to "make
> xconfig" options or some other thing. Please give me
> suggestion.
I guess the obvious questions are:
What kind of filesystem are you trying to mount as root? Have you
checked whether a root argument is being passed to the kernel by
whatever loader you're using?
Did you inadvertently disable support for that kind of filesystem?
If you're mounting root over NFS, did you disable support for
any of the networking options you might need? (like, say, kernel-level
IP autoconfiguration).
In short, what changed between the last configuration that worked,
and this one that doesn't?
-Justin
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 232 bytes --]
^ permalink raw reply [flat|nested] 45+ messages in thread
* kernel panic
@ 2002-02-19 18:27 chiranjeevi vaka
2002-02-19 18:50 ` Justin Carlson
2002-02-21 17:17 ` Fernando Korndorfer
0 siblings, 2 replies; 45+ messages in thread
From: chiranjeevi vaka @ 2002-02-19 18:27 UTC (permalink / raw)
To: linux-kernel
Hi all,
I am working on linux kernel tcp/ip optimization.
After doing some changes in my kernel, I am copiling
the kernel. While doing make xconfig, I have seleceted
some of known options and later as usual I have done
make dep;make bzdisk.
The problem is while booting the kernel with my newly
developed floppy, I am getting the error message
kernel panic: VFS: Unable to mount root fs on 08:03
I donno what to do. Is it some thing related to "make
xconfig" options or some other thing. Please give me
suggestion.
Thanking you in advance
Murali.
__________________________________________________
Do You Yahoo!?
Yahoo! Sports - Coverage of the 2002 Olympic Games
http://sports.yahoo.com
^ permalink raw reply [flat|nested] 45+ messages in thread
* kernel panic
@ 2002-01-02 19:34 nntp
0 siblings, 0 replies; 45+ messages in thread
From: nntp @ 2002-01-02 19:34 UTC (permalink / raw)
To: linux-kernel
Hello everyone,
I've been having a problem with kernel panics and I'm hoping someone can
suggest something.
Here is the specs for the machine:
Tyan dual Athlon (S2462)
2 MP-1800+ CPUs
2 GB ECC DDR (4 x 512MB)
2 GB of swap space
RedHat 7.2 install /w custom kernel
I've tried several kernels, but the following oops's were on 2.4.17
compiled with high memory, SMP, and P3 optimizations. This machine is under
a very heavy CPU, IO, and network load. I've seen it run for days and I've
seen it lockup every 3 hours. There doesn't seem to be any pattern other
than it dies while under heavy load. Another thing of interest is that it
does a lot of network traffic through the loopback device (127.0.0.1). The
dmulti process listed in the oops's below is basically a proxy that uses the
loopback device to talk to other processes on the same machine. It's
transferring 20-30 mbits of data 24/7.
Output from 'free':
total used free shared buffers cached
Mem: 2061364 2050892 10472 0 49072 1229432
-/+ buffers/cache: 772388 1288976
Swap: 2097016 126296 1970720
The following was logged when the machine locked up hard:
Jan 2 05:53:15 news5 kernel: Unable to handle kernel NULL pointer
dereference at virtual address 000007e5
Jan 2 05:53:15 news5 kernel: printing eip:
Jan 2 05:53:15 news5 kernel: c0237000
Jan 2 05:53:15 news5 kernel: *pde = 00000000
Jan 2 05:53:15 news5 kernel: Oops: 0000
Jan 2 05:53:15 news5 kernel: CPU: 1
Jan 2 05:53:15 news5 kernel: EIP: 0010:[<c0237000>] Not tainted Jan
2 05:53:15 news5 kernel: EFLAGS: 00010286
Jan 2 05:53:15 news5 kernel: eax: 000006bd ebx: 00000009 ecx:
e4a0e540
edx: 000007dd
Jan 2 05:53:15 news5 kernel: esi: e4a0e540 edi: 00000200 ebp:
00000001
esp: f2a65f30
Jan 2 05:53:15 news5 kernel: ds: 0018 es: 0018 ss: 0018
Jan 2 05:53:15 news5 kernel: Process dmulti (pid: 874,
stackpage=f2a65000) Jan 2 05:53:15 news5 kernel: Stack: c0141dd7
e4a0e540 00000000 f2a65f54 00000145 f2a64000 00000064 00000129
Jan 2 05:53:15 news5 kernel: 00000000 00000000 d8797000 00000020
bffffce8 d313f300 00000400 c0142259
Jan 2 05:53:15 news5 kernel: 00000282 f2a65f90 f2a65f8c f1aeef60
00000030 00000080 d313f000 00000064
Jan 2 05:53:15 news5 kernel: Call Trace: [<c0141dd7>] [<c0142259>]
[<c0106f1b>] Jan 2 05:53:15 news5 kernel:
Jan 2 05:53:15 news5 kernel: Code: 8b 80 28 01 00 00 ff 74 24 08 52 51
ff 50 1c 83 c4 0c c3 8d
I've never used ksymoops before, but it wrote the following trace when fed
the above oops:
>>EIP; c0237000 <sock_poll+10/30> <=====
Trace; c0141dd7 <do_select+127/240>
Trace; c0142259 <sys_select+339/480>
Trace; c0106f1b <system_call+33/38>
Code; c0237000 <sock_poll+10/30>
00000000 <_EIP>:
Code; c0237000 <sock_poll+10/30> <=====
0: 8b 80 28 01 00 00 mov 0x128(%eax),%eax <=====
Code; c0237006 <sock_poll+16/30>
6: ff 74 24 08 pushl 0x8(%esp,1)
Code; c023700a <sock_poll+1a/30>
a: 52 push %edx
Code; c023700b <sock_poll+1b/30>
b: 51 push %ecx
Jan 2 05:53:15 news5 kernel: <1>Unable to handle kernel NULL pointer
dereference at virtual address 000006ef
Jan 2 05:53:15 news5 kernel: printing eip:
Jan 2 05:53:15 news5 kernel: c0148b86
Jan 2 05:53:15 news5 kernel: *pde = 00000000
Jan 2 05:53:15 news5 kernel: Oops: 0000
Jan 2 05:53:15 news5 kernel: CPU: 1
Jan 2 05:53:15 news5 kernel: EIP: 0010:[<c0148b86>] Not tainted Jan
2 05:53:15 news5 kernel: EFLAGS: 00010202
Jan 2 05:53:15 news5 kernel: eax: f01027a0 ebx: 007fffff ecx:
00000000
edx: 00000000
Jan 2 05:53:15 news5 kernel: esi: 000006bd edi: 00000000 ebp:
e4a0e540
esp: f2a65da8
Jan 2 05:53:15 news5 kernel: ds: 0018 es: 0018 ss: 0018
Jan 2 05:53:15 news5 kernel: Process dmulti (pid: 874,
stackpage=f2a65000) Jan 2 05:53:15 news5 kernel: Stack: 00000001
007fffff e4a0e540 00000000 00000129 c01338bb 00000000 e4a0e540
Jan 2 05:53:15 news5 kernel: 00000000 007fffff f7547280 0000000a
c011838d e4a0e540 f7547280 00000000
Jan 2 05:53:15 news5 kernel: f2a64000 f2a64000 0000000b c0118b8f
f7547280 0000000f c029a0f0 f2a65efc
Jan 2 05:53:15 news5 kernel: Call Trace: [<c01338bb>] [<c011838d>]
[<c0118b8f>] [<c0111e10>] [<c0107464>]
Jan 2 05:53:15 news5 kernel: [<c0112208>] [<c012d871>] [<c012d9c0>]
[<c0111e50>] [<c010700c>] [<c0237000>]
Jan 2 05:53:15 news5 kernel: [<c0141dd7>] [<c0142259>] [<c0106f1b>] Jan
2 05:53:15 news5 kernel:
Jan 2 05:53:15 news5 kernel: Code: 0f b7 46 32 25 00 f0 00 00 66 3d 00
40 74 0b b8 ec ff ff ff
ksymoops wrote from the above:
>>EIP; c0148b86 <fcntl_dirnotify+46/180> <=====
Trace; c01338bb <filp_close+7b/a0>
Trace; c011838d <put_files_struct+4d/d0>
Trace; c0118b8f <do_exit+10f/240>
Trace; c0111e10 <bust_spinlocks+50/60>
Trace; c0107464 <die+54/70>
Trace; c0112208 <do_page_fault+3b8/500>
Trace; c012d871 <__alloc_pages+41/180>
Trace; c012d9c0 <__get_free_pages+10/20>
Trace; c0111e50 <do_page_fault+0/500>
Trace; c010700c <error_code+34/3c>
Trace; c0237000 <sock_poll+10/30>
Trace; c0141dd7 <do_select+127/240>
Trace; c0142259 <sys_select+339/480>
Trace; c0106f1b <system_call+33/38>
Code; c0148b86 <fcntl_dirnotify+46/180>
00000000 <_EIP>:
Code; c0148b86 <fcntl_dirnotify+46/180> <=====
0: 0f b7 46 32 movzwl 0x32(%esi),%eax <=====
Code; c0148b8a <fcntl_dirnotify+4a/180>
4: 25 00 f0 00 00 and $0xf000,%eax
Code; c0148b8f <fcntl_dirnotify+4f/180>
9: 66 3d 00 00 cmp $0x0,%ax
The following was logged when the machine just removed one process. The
process could not be restarted because the network port 119 was not released
when the process died. I had to restart the machine.
Jan 2 02:28:31 news5 kernel: Unable to handle kernel paging request at
virtual address 3f4d0b35
Jan 2 02:28:31 news5 kernel: printing eip:
Jan 2 02:28:31 news5 kernel: c0237000
Jan 2 02:28:31 news5 kernel: *pde = 00000000
Jan 2 02:28:31 news5 kernel: Oops: 0000
Jan 2 02:28:31 news5 kernel: CPU: 0
Jan 2 02:28:31 news5 kernel: EIP: 0010:[<c0237000>] Not tainted
Jan 2 02:28:31 news5 kernel: EFLAGS: 00010286
Jan 2 02:28:31 news5 kernel: eax: 3f4d0a0d ebx: 00000003 ecx: ee7f44a0
edx: 3f4d0b2d
Jan 2 02:28:31 news5 kernel: esi: ee7f44a0 edi: 10000000 ebp: 00000000
esp: ee9a7f30
Jan 2 02:28:31 news5 kernel: ds: 0018 es: 0018 ss: 0018
Jan 2 02:28:31 news5 kernel: Process dmulti (pid: 885, stackpage=ee9a7000)
Jan 2 02:28:31 news5 kernel: Stack: c0141dd7 ee7f44a0 00000000 ee9a7f54
00000145 ee9a6000 00000062 0000007c
Jan 2 02:28:31 news5 kernel: 00000000 00000000 e3d65000 00000020
bffffce8 d6eb8b00 00000400 c0142259
Jan 2 02:28:31 news5 kernel: 000001ed ee9a7f90 ee9a7f8c ec293160
00000011 00000080 d6eb8800 00000064
Jan 2 02:28:31 news5 kernel: Call Trace: [<c0141dd7>] [<c0142259>] [<c0106f1b>]
Jan 2 02:28:31 news5 kernel:
Jan 2 02:28:31 news5 kernel: Code: 8b 80 28 01 00 00 ff 74 24 08 52 51 ff
50 1c 83 c4 0c c3 8d
ksymoops wrote:
>>EIP; c0237000 <sock_poll+10/30> <=====
Trace; c0141dd7 <do_select+127/240>
Trace; c0142259 <sys_select+339/480>
Trace; c0106f1b <system_call+33/38>
Code; c0237000 <sock_poll+10/30>
00000000 <_EIP>:
Code; c0237000 <sock_poll+10/30> <=====
0: 8b 80 28 01 00 00 mov 0x128(%eax),%eax <=====
Code; c0237006 <sock_poll+16/30>
6: ff 74 24 08 pushl 0x8(%esp,1)
Code; c023700a <sock_poll+1a/30>
a: 52 push %edx
Code; c023700b <sock_poll+1b/30>
b: 51 push %ecx
Code; c023700c <sock_poll+1c/30>
c: ff 00 incl (%eax)
Jan 2 02:28:31 news5 kernel: <1>Unable to handle kernel paging request at
virtual address 3f4d0a3f
Jan 2 02:28:31 news5 kernel: printing eip:
Jan 2 02:28:31 news5 kernel: c0148b86
Jan 2 02:28:31 news5 kernel: *pde = 00000000
Jan 2 02:28:31 news5 kernel: Oops: 0000
Jan 2 02:28:31 news5 kernel: CPU: 0
Jan 2 02:28:31 news5 kernel: EIP: 0010:[<c0148b86>] Not tainted
Jan 2 02:28:31 news5 kernel: EFLAGS: 00010202
Jan 2 02:28:31 news5 kernel: eax: ee0065e0 ebx: 0000000f ecx: 00000000
edx: 00000000
Jan 2 02:28:31 news5 kernel: esi: 3f4d0a0d edi: 00000000 ebp: ee7f44a0
esp: ee9a7da8
Jan 2 02:28:31 news5 kernel: ds: 0018 es: 0018 ss: 0018
Jan 2 02:28:31 news5 kernel: Process dmulti (pid: 885, stackpage=ee9a7000)
Jan 2 02:28:31 news5 kernel: Stack: 00000001 0000000f ee7f44a0 00000000
0000007c c01338bb 00000000 ee7f44a0
Jan 2 02:28:31 news5 kernel: 00000000 0000000f f33405c0 00000004
c011838d ee7f44a0 f33405c0 00000000
Jan 2 02:28:31 news5 kernel: ee9a6000 ee9a6000 0000000b c0118b8f
f33405c0 00000000 0000002e f3349f64
Jan 2 02:28:31 news5 kernel: Call Trace: [<c01338bb>] [<c011838d>]
[<c0118b8f>] [<c0107477>] [<c0112208>]
Jan 2 02:28:31 news5 kernel: [<c0239efc>] [<c023a070>] [<c023d992>] [<c0119e7b>]
[<c01089bd>] [<c010ac18>]
Jan 2 02:28:31 news5 kernel: [<c0111e50>] [<c010700c>] [<c0237000>] [<c0141dd7>]
[<c0142259>] [<c0106f1b>]
Jan 2 02:28:31 news5 kernel:
Jan 2 02:28:31 news5 kernel: Code: 0f b7 46 32 25 00 f0 00 00 66 3d 00 40
74 0b b8 ec ff ff ff
ksymoops wrote the follow from the above:
>>EIP; c0148b86 <fcntl_dirnotify+46/180> <=====
Trace; c01338bb <filp_close+7b/a0>
Trace; c011838d <put_files_struct+4d/d0>
Trace; c0118b8f <do_exit+10f/240>
Trace; c0107477 <die+67/70>
Trace; c0112208 <do_page_fault+3b8/500>
Trace; c0239efc <kfree_skbmem+c/70>
Trace; c023a070 <__kfree_skb+110/120>
Trace; c023d992 <net_tx_action+62/140>
Trace; c0119e7b <do_softirq+7b/e0>
Trace; c01089bd <do_IRQ+dd/f0>
Trace; c010ac18 <call_do_IRQ+5/d>
Trace; c0111e50 <do_page_fault+0/500>
Trace; c010700c <error_code+34/3c>
Trace; c0237000 <sock_poll+10/30>
Trace; c0141dd7 <do_select+127/240>
Trace; c0142259 <sys_select+339/480>
Trace; c0106f1b <system_call+33/38>
Code; c0148b86 <fcntl_dirnotify+46/180>
00000000 <_EIP>:
Code; c0148b86 <fcntl_dirnotify+46/180> <=====
0: 0f b7 46 32 movzwl 0x32(%esi),%eax <=====
Code; c0148b8a <fcntl_dirnotify+4a/180>
4: 25 00 f0 00 00 and $0xf000,%eax
Code; c0148b8f <fcntl_dirnotify+4f/180>
9: 66 3d 00 40 cmp $0x4000,%ax
Does this help any?
Thanks,
Steve.
^ permalink raw reply [flat|nested] 45+ messages in thread
* kernel panic
2001-12-17 15:38 ` Victor Yodaiken
@ 2001-12-17 17:33 ` Geoffrey
0 siblings, 0 replies; 45+ messages in thread
From: Geoffrey @ 2001-12-17 17:33 UTC (permalink / raw)
To: linux-kernel
I'm looking for the proper forum for posting a (possible) kernel bug.
I'm receiving a panic when attempting to write a cdrw under 2.4.12.
I don't know that this is a bug, but I would expect some other activity
rather than a panic/lockup.
Suggestions as to the proper forum would be appreciated.
--
Until later: Geoffrey esoteric@3times25.net
"...the system (Microsoft passport) carries significant risks to users
that
are not made adequately clear in the technical documentation available."
- David P. Kormann and Aviel D. Rubin, AT&T Labs - Research
- http://www.avirubin.com/passport.html
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: Kernel Panic
2000-11-17 17:44 Kernel Panic Dave Seff
@ 2000-11-18 19:29 ` Chmouel Boudjnah
0 siblings, 0 replies; 45+ messages in thread
From: Chmouel Boudjnah @ 2000-11-18 19:29 UTC (permalink / raw)
To: Dave Seff; +Cc: linux-kernel, groudier
Dave Seff <dseff@bloomberg.com> writes:
> I am not subscribed to this list, so please cc me on
> replies. Thanks. I was running mke2fs on an external 17GB SCSI
> drive. This started spewing and blasted the 2.2.17mdksmp kernel.
could you generate it with ksymoops(include kernel-utils rpm) like explain in :
/usr/src/linux-2.2.17/REPORTING-BUGS
> ncr53c896-0:2: ERROR (0:4) (8-0-0) (0/f) @ (script 42c:0f000001).
> ncr53c896-0: script cmd = 71500000 ncr53c896-0: regdump: da 00 80 0f
> 47 00 02 0b 81 00 82 00 80 00 08 02.
--
MandrakeSoft Inc http://www.chmouel.org
--Chmouel
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 45+ messages in thread
* Kernel Panic
@ 2000-11-17 17:44 Dave Seff
2000-11-18 19:29 ` Chmouel Boudjnah
0 siblings, 1 reply; 45+ messages in thread
From: Dave Seff @ 2000-11-17 17:44 UTC (permalink / raw)
To: linux-kernel; +Cc: groudier
I am not subscribed to this list, so please cc me on replies. Thanks.
I was running mke2fs on an external 17GB SCSI drive. This started spewing and
blasted the 2.2.17mdksmp kernel.
ncr53c896-0:2: ERROR (0:4) (8-0-0) (0/f) @ (script 42c:0f000001).
ncr53c896-0: script cmd = 71500000
ncr53c896-0: regdump: da 00 80 0f 47 00 02 0b 81 00 82 00 80 00 08 02.
ncr53c896-0: have to clear fifos.
ncr53c896-0: unexpected disconnect
ncr53c896-0:2: ERROR (0:4) (8-0-0) (0/7) @ (script dc:870b0000).
ncr53c896-0: script cmd = 900a0000
ncr53c896-0: regdump: da 00 80 07 47 00 02 0b 02 08 00 00 80 00 03 02.
ncr53c896-0: have to clear fifos.
ncr53c896-0: unexpected disconnect
ncr53c896-0: SCSI parity error detected: SCR1=138 DBC=870b0000 SSTAT1=3
ncr53c896-0:2: SIR 16, incorrect nexus identification on reselection
ncr53c896-0:2: ERROR (81:0) (6-a3-2) (0/7) @ (scripth 12c0:48000000).
ncr53c896-0: script cmd = 80080000
ncr53c896-0: regdump: da 00 00 07 47 00 02 0b 76 00 82 00 80 00 00 02.
ncr53c896-0: have to clear fifos.
Unable to handle kernel NULL pointer dereference at virtual address 00000040
current->tss.cr3 = 00101000, %cr3 = 00101000
*pde = 00000000
Oops: 0000
CPU: 1
EIP: 0010:[<c024877f>]
EFLAGS: 00010046
eax: 00000000 ebx: db222800 ecx: f7ff8960 edx: 00000000
esi: f7fd5000 edi: f7fd51c4 ebp: 00000000 esp: c02e7e14
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 0, process nr: 0, stackpage=c02e7000)
Stack: f7fd51c4 1b222800 00000000 c011056f c0240fe3 f7fe8c00 00000000
00000000
00000086 00000000 00000286 c009ee00 00000004 c0248c06 f7fd5000
00000001
db222800 00000000 00000000 f7fd5000 0000000a 00000004 00000246
00000001
Call Trace: [<c011056f>] [<c0240fe3>] [<c0248c06>] [<c010bb79>] [<c0247e1e>]
[<c010b9e9>] [<c0249ebf>]
[<c0114c0a>] [<c011056f>] [<c010b9e9>] [<c0114e44>] [<c010a58f>]
[<c011ac71>] [<c010bb79>] [<c010bb90>]
[<c0110fbe>] [<c010a5e8>] [<c0107af9>] [<c0106000>] [<c01001ae>]
Code: 8a 45 40 8d 14 80 8d 14 d0 8d 54 96 7c 89 54 24 2c 8b 44 24
Aiee, killing interrupt handler
Kernel panic: Attempted to kill the idle task!
In swapper task - not syncing
Dave Seff
Systems Administrator
Bloomberg Financial Markets
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 45+ messages in thread
end of thread, other threads:[~2013-09-17 2:59 UTC | newest]
Thread overview: 45+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2002-03-05 22:31 Kernel panic Hanno Böck
2002-03-06 1:40 ` Lionel Bouton
2002-03-06 1:50 ` Andre Hedrick
2002-03-06 2:24 ` [SiS IDE] 530,540,620 5511,5513 testers wanted Lionel Bouton
-- strict thread matches above, loose matches on Subject: below --
2013-09-17 2:59 Kernel panic zhang xintao
2012-12-02 17:30 Stefan Beller
2012-12-02 17:51 ` Stefan Beller
2012-12-02 19:13 ` rh
[not found] <201201191202.q0JC243u029201@curly.dor.state.ma.us>
2012-01-19 15:26 ` Ron Murray
2011-10-24 11:19 kernel panic nick bray
2011-10-25 20:55 ` Bjorn Helgaas
2011-10-26 10:00 ` Len Brown
2011-10-26 14:53 ` Bjorn Helgaas
[not found] ` <4EA82832.2070201@ntlworld.com>
2011-10-26 16:18 ` Bjorn Helgaas
[not found] ` <4EA83F5D.20001@ntlworld.com>
2011-10-26 18:10 ` Bjorn Helgaas
2011-10-28 2:13 ` Thomas Renninger
2011-10-31 12:24 ` Thomas Renninger
2010-05-18 4:23 senthilkumaar2021
2010-05-18 4:47 ` Justin P. Mattock
2010-05-18 4:55 ` senthilkumaar2021
2010-05-18 5:05 ` Eric Dumazet
2010-05-18 5:08 ` Justin P. Mattock
[not found] <9a5eeacd0804210350v79db27f0of73a29c55e2b7311@mail.gmail.com>
2008-04-21 10:56 ` Kernel panic Matthias Andersson
2008-04-21 11:07 ` Bart Van Assche
2006-08-24 18:01 kernel panic febo
2006-02-24 10:15 Rogel Miguez
[not found] <4GLD8-5Wa-27@gated-at.bofh.it>
2005-08-29 23:50 ` Robert Hancock
2005-08-29 6:43 manomugdha biswas
2004-04-12 10:39 osmaker@hu
2004-04-12 10:43 ` osmaker@hu
2004-04-12 12:26 ` Zwane Mwaikambo
[not found] <S263478AbTLEJ0s/20031205092648Z+878@vger.kernel.org>
2003-12-05 9:34 ` Kernel panic neel vanan
2003-12-05 14:19 ` William Lee Irwin III
2003-12-06 5:47 ` William Lee Irwin III
2003-03-26 20:22 Kernel Panic David van Hoose
2003-03-26 11:28 ` dan carpenter
2002-04-06 4:16 Kernel panic Daniel Mundy
2002-04-06 18:05 ` Alan Cox
2002-02-19 18:27 kernel panic chiranjeevi vaka
2002-02-19 18:50 ` Justin Carlson
2002-02-21 17:17 ` Fernando Korndorfer
2002-01-02 19:34 nntp
2001-12-15 18:47 mempool design Benjamin LaHaise
2001-12-15 22:18 ` Ingo Molnar
2001-12-17 15:04 ` Andrea Arcangeli
2001-12-17 15:38 ` Victor Yodaiken
2001-12-17 17:33 ` kernel panic Geoffrey
2000-11-17 17:44 Kernel Panic Dave Seff
2000-11-18 19:29 ` Chmouel Boudjnah
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).