From: Andre Hedrick <andre@linux-ide.org>
To: Meelis Roos <mroos@tartu.cyber.ee>
Cc: linux-kernel@vger.kernel.org
Subject: Re: Hangs in 2.4.19 and 2.4.20-pre5 (IDE-related?)
Date: Thu, 29 Aug 2002 12:37:19 -0700 (PDT) [thread overview]
Message-ID: <Pine.LNX.4.10.10208291235060.24156-100000@master.linux-ide.org> (raw)
In-Reply-To: <Pine.LNX.4.44.0208292051520.25834-100000@ondatra.tartu-labor>
On Thu, 29 Aug 2002, Meelis Roos wrote:
> pcibus = 33333
> 00:07.1 vendor=8086 device=7111 class=0101 irq=0 base4=f001
> ----------PIIX BusMastering IDE Configuration---------------
> Driver Version: 1.3
> South Bridge: 28945
> Revision: IDE 0x1
> Highest DMA rate: UDMA33
> BM-DMA base: 0xf000
> PCI clock: 33.3MHz
> -----------------------Primary IDE-------Secondary IDE------
> Enabled: yes yes
> Simplex only: no no
> Cable Type: 40w 40w
> -------------------drive0----drive1----drive2----drive3-----
> Prefetch+Post: yes yes yes yes
> Transfer Mode: PIO PIO PIO PIO
> Address Setup: 90ns 90ns 90ns 90ns
> Cmd Active: 360ns 360ns 360ns 360ns
> Cmd Recovery: 540ns 540ns 540ns 540ns
> Data Active: 90ns 90ns 90ns 90ns
> Data Recovery: 30ns 30ns 90ns 30ns
> Cycle Time: 120ns 120ns 180ns 120ns
> Transfer Rate: 16.6MB/s 16.6MB/s 11.1MB/s 16.6MB/s
That is not my work and you are on your own for that mess.
That looks straight out of 2.5.30.
next prev parent reply other threads:[~2002-08-29 19:35 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-08-29 18:26 Hangs in 2.4.19 and 2.4.20-pre5 (IDE-related?) Meelis Roos
2002-08-29 19:37 ` Andre Hedrick [this message]
2002-08-29 20:18 ` Meelis Roos
2002-08-29 20:46 ` Vojtech Pavlik
2002-08-30 3:04 ` Andre Hedrick
2002-08-30 5:51 ` Vojtech Pavlik
2002-08-30 6:31 ` Andre Hedrick
2002-08-30 6:51 ` Vojtech Pavlik
2002-08-30 14:34 ` Meelis Roos
2002-09-26 20:37 Joao S Veiga
2002-10-06 14:08 Jan-Hinnerk Reichert
2002-10-06 16:25 ` Alan Cox
2002-10-06 19:56 ` Jan-Hinnerk Reichert
2002-10-06 21:38 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.10.10208291235060.24156-100000@master.linux-ide.org \
--to=andre@linux-ide.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mroos@tartu.cyber.ee \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).