From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Mon, 5 Nov 2001 06:45:43 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Mon, 5 Nov 2001 06:45:33 -0500 Received: from [62.58.73.254] ([62.58.73.254]:20219 "EHLO ats-core-0.atos-group.nl") by vger.kernel.org with ESMTP id ; Mon, 5 Nov 2001 06:45:16 -0500 Date: Mon, 5 Nov 2001 12:47:11 +0100 (CET) From: Ryan Sweet To: Linux Kernel Subject: ip autoconfig and e100 In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org I've posted previously about my ongoing pains with a diskless cluster of dual cpu serverworks boards that use on-board Intel eepro100 chips. Basically the nodes randomly reboot themselves. See previous posts by me for more thorough description. After reading some more of the posts recently regarding the eepro/100 on board nics, and the various drivers available, I think that my symptoms are possibly consistent with the problem where the card flakes out. We are using the eepro100.c compiled statically. I'd like to try the e100 module from Intel, but I can't get it to work with nfsroot. The Intel e100 driver is only available as a module. IP autoconfig (which does not appear to be available as a module) attempts to set the address before the module is loaded and the card is detected, thus by the time the module is loaded from my initrd the system has already given up on ip autoconfig and thus cannot mount its nfsroot filesystem. Is there a way to make the intel driver static? or perhaps to make ip autoconfig a module, or to configure the network in another way in combination with nfsroot? thanks, -ryan -- Ryan Sweet Atos Origin Engineering Services http://www.aoes.nl