Script started on Thu Aug 29 12:53:56 2002
]0;root@linux:/[root@linux /]# cat /proc/cpuinfo

processor	: 0

vendor_id	: GenuineIntel

cpu family	: 6

model		: 7

model name	: Pentium III (Katmai)

stepping	: 3

cpu MHz		: 501.140

cache size	: 512 KB

fdiv_bug	: no

hlt_bug		: no

f00f_bug	: no

coma_bug	: no

fpu		: yes

fpu_exception	: yes

cpuid level	: 2

wp		: yes

flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse

bogomips	: 999.42



]0;root@linux:/[root@linux /]# cat /proc/modules

nfs                    83680   1 (autoclean)

nfsd                   71808   0 (autoclean)

lockd                  53744   1 (autoclean) [nfs nfsd]

sunrpc                 70000   1 (autoclean) [nfs nfsd lockd]

autofs                 12096   1 (autoclean)

tulip                  39776   1

usb-uhci               22880   0 (unused)

usbcore                54528   1 [usb-uhci]

ext3                   67728   2

jbd                    44480   2 [ext3]

aic7xxx               114704   0 (unused)

sd_mod                 11584   0 (unused)

scsi_mod               98512   2 [aic7xxx sd_mod]

]0;root@linux:/[root@linux /]# cat /proc/ioports 

0000-001f : dma1

0020-003f : pic1

0040-005f : timer

0060-006f : keyboard

0070-007f : rtc

0080-008f : dma page reg

00a0-00bf : pic2

00c0-00df : dma2

00f0-00ff : fpu

01f0-01f7 : ide0

0213-0213 : isapnp read

02f8-02ff : serial(auto)

03c0-03df : vga+

03e8-03ef : serial(auto)

03f6-03f6 : ide0

03f8-03ff : serial(auto)

0a79-0a79 : isapnp write

0cf8-0cff : PCI conf1

4000-403f : Intel Corporation 82371AB PIIX4 ACPI

5000-501f : Intel Corporation 82371AB PIIX4 ACPI

c000-cfff : PCI Bus #01

  c000-c0ff : ATI Technologies Inc 3D Rage IIC AGP

d000-dfff : PCI Bus #02

  d000-d07f : Digital Equipment Corporation DECchip 21140 [FasterNet]

    d000-d07f : tulip

  d400-d47f : Digital Equipment Corporation DECchip 21140 [FasterNet] (#2)

    d400-d47f : tulip

e000-e01f : Intel Corporation 82371AB PIIX4 USB

  e000-e01f : usb-uhci

e400-e4ff : Adaptec AHA-2940U2/W / 7890

  e400-e4fe : aic7xxx

f000-f00f : Intel Corporation 82371AB PIIX4 IDE

  f000-f007 : ide0

  f008-f00f : ide1

]0;root@linux:/[root@linux /]# lspci -vvv

00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev 03)

	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-

	Latency: 64

	Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]

	Capabilities: [a0] AGP version 1.0

		Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2

		Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>



00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 03) (prog-if 00 [Normal decode])

	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-

	Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

	Latency: 64

	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64

	I/O behind bridge: 0000c000-0000cfff

	Memory behind bridge: e8000000-e9ffffff

	Prefetchable memory behind bridge: ea000000-eaffffff

	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B+



00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)

	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

	Latency: 0



00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master])

	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

	Latency: 64

	Region 4: I/O ports at f000 [size=16]



00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI])

	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

	Latency: 64

	Interrupt: pin D routed to IRQ 19

	Region 4: I/O ports at e000 [size=32]



00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)

	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

	Interrupt: pin ? routed to IRQ 9



00:0b.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03) (prog-if 00 [Normal decode])

	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-

	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

	Latency: 64, cache line size 02

	Bus: primary=00, secondary=02, subordinate=02, sec-latency=64

	I/O behind bridge: 0000d000-0000dfff

	Memory behind bridge: e4000000-e7ffffff

	Prefetchable memory behind bridge: 00000000fff00000-0000000000000000

	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-

	Capabilities: [dc] Power Management version 1

		Flags: PMEClk- DSI- D1- D2- AuxCurrent=220mA PME(D0-,D1-,D2-,D3hot-,D3cold-)

		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

		Bridge: PM- B3+



00:0c.0 SCSI storage controller: Adaptec AHA-2940U2/W / 7890

	Subsystem: Adaptec 2940U2W SCSI Controller

	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-

	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

	Latency: 64 (9750ns min, 6250ns max), cache line size 08

	Interrupt: pin A routed to IRQ 18

	BIST result: 00

	Region 0: I/O ports at e400 [size=256]

	Region 1: Memory at ec000000 (64-bit, non-prefetchable) [size=4K]

	Expansion ROM at eb000000 [disabled] [size=128K]

	Capabilities: [dc] Power Management version 1

		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)

		Status: D0 PME-Enable- DSel=0 DScale=0 PME-



01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC AGP (rev 7a) (prog-if 00 [VGA])

	Subsystem: ATI Technologies Inc: Unknown device 0084

	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-

	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

	Latency: 64 (2000ns min), cache line size 08

	Interrupt: pin A routed to IRQ 16

	Region 0: Memory at ea000000 (32-bit, prefetchable) [size=16M]

	Region 1: I/O ports at c000 [size=256]

	Region 2: Memory at e9000000 (32-bit, non-prefetchable) [size=4K]

	Expansion ROM at <unassigned> [disabled] [size=128K]

	Capabilities: [5c] Power Management version 1

		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)

		Status: D0 PME-Enable- DSel=0 DScale=0 PME-



02:04.0 Ethernet controller: Digital Equipment Corporation DECchip 21140 [FasterNet] (rev 22)

	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

	Latency: 64 (5000ns min, 10000ns max), cache line size 08

	Interrupt: pin A routed to IRQ 19

	Region 0: I/O ports at d000 [size=128]

	Region 1: Memory at e6001000 (32-bit, non-prefetchable) [size=128]

	Expansion ROM at e4000000 [disabled] [size=256K]



02:05.0 Ethernet controller: Digital Equipment Corporation DECchip 21140 [FasterNet] (rev 22)

	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

	Latency: 64 (5000ns min, 10000ns max), cache line size 08

	Interrupt: pin A routed to IRQ 16

	Region 0: I/O ports at d400 [size=128]

	Region 1: Memory at e6000000 (32-bit, non-prefetchable) [size=128]

	Expansion ROM at e5000000 [disabled] [size=256K]



]0;root@linux:/[root@linux /]# exit

exit


Script done on Thu Aug 29 12:54:42 2002