From: Maciej Soltysiak <solt@dns.toxicfilms.tv>
To: linux-kernel@vger.kernel.org
Cc: alan@lxorguk.ukuu.org.uk
Subject: [PATCH] C99 Initialisers around scsi + ac97_codec.c
Date: Mon, 7 Apr 2003 21:16:51 +0200 (CEST) [thread overview]
Message-ID: <Pine.LNX.4.51.0304072115010.19830@dns.toxicfilms.tv> (raw)
In-Reply-To: <Pine.LNX.4.51.0304051607310.32140@dns.toxicfilms.tv>
Hello,
here is a set of C99 initialisers to 2.5.66-bk13 drivers/scsi and
sound/pci/ac97/ac97_codec.c files.
drivers/scsi/3w-xxxx.c | 8 +-
drivers/scsi/aic7xxx/aic79xx_osm_pci.c | 8 +-
drivers/scsi/aic7xxx/aic7xxx_osm_pci.c | 8 +-
drivers/scsi/gdth.h | 92 ++++++++++++++++-----------------
drivers/scsi/sym53c8xx_2/sym53c8xx.h | 32 +++++------
sound/pci/ac97/ac97_codec.c | 10 +--
6 files changed, 79 insertions(+), 79 deletions(-)
Regards,
Maciej
diff -Nru linux-2.5.66.orig/drivers/scsi/3w-xxxx.c linux-2.5.66/drivers/scsi/3w-xxxx.c
--- linux-2.5.66.orig/drivers/scsi/3w-xxxx.c 2003-04-07 20:57:44.000000000 +0200
+++ linux-2.5.66/drivers/scsi/3w-xxxx.c 2003-04-07 20:51:07.000000000 +0200
@@ -226,10 +226,10 @@
/* File operations struct for character device */
static struct file_operations tw_fops = {
- owner: THIS_MODULE,
- ioctl: tw_chrdev_ioctl,
- open: tw_chrdev_open,
- release: tw_chrdev_release
+ .owner = THIS_MODULE,
+ .ioctl = tw_chrdev_ioctl,
+ .open = tw_chrdev_open,
+ .release = tw_chrdev_release
};
/* Globals */
diff -Nru linux-2.5.66.orig/drivers/scsi/aic7xxx/aic79xx_osm_pci.c linux-2.5.66/drivers/scsi/aic7xxx/aic79xx_osm_pci.c
--- linux-2.5.66.orig/drivers/scsi/aic7xxx/aic79xx_osm_pci.c 2003-03-05 04:29:04.000000000 +0100
+++ linux-2.5.66/drivers/scsi/aic7xxx/aic79xx_osm_pci.c 2003-04-07 20:51:04.000000000 +0200
@@ -70,10 +70,10 @@
MODULE_DEVICE_TABLE(pci, ahd_linux_pci_id_table);
struct pci_driver aic79xx_pci_driver = {
- name: "aic79xx",
- probe: ahd_linux_pci_dev_probe,
- remove: ahd_linux_pci_dev_remove,
- id_table: ahd_linux_pci_id_table
+ .name = "aic79xx",
+ .probe = ahd_linux_pci_dev_probe,
+ .remove = ahd_linux_pci_dev_remove,
+ .id_table = ahd_linux_pci_id_table
};
static void
diff -Nru linux-2.5.66.orig/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c linux-2.5.66/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c
--- linux-2.5.66.orig/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c 2003-03-05 04:29:04.000000000 +0100
+++ linux-2.5.66/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c 2003-04-07 20:51:04.000000000 +0200
@@ -75,10 +75,10 @@
MODULE_DEVICE_TABLE(pci, ahc_linux_pci_id_table);
struct pci_driver aic7xxx_pci_driver = {
- name: "aic7xxx",
- probe: ahc_linux_pci_dev_probe,
- remove: ahc_linux_pci_dev_remove,
- id_table: ahc_linux_pci_id_table
+ .name = "aic7xxx",
+ .probe = ahc_linux_pci_dev_probe,
+ .remove = ahc_linux_pci_dev_remove,
+ .id_table = ahc_linux_pci_id_table
};
static void
diff -Nru linux-2.5.66.orig/drivers/scsi/gdth.h linux-2.5.66/drivers/scsi/gdth.h
--- linux-2.5.66.orig/drivers/scsi/gdth.h 2003-04-07 20:57:14.000000000 +0200
+++ linux-2.5.66/drivers/scsi/gdth.h 2003-04-07 20:51:06.000000000 +0200
@@ -1013,29 +1013,29 @@
int gdth_eh_device_reset(Scsi_Cmnd *scp);
int gdth_eh_bus_reset(Scsi_Cmnd *scp);
int gdth_eh_host_reset(Scsi_Cmnd *scp);
-#define GDTH { proc_name: "gdth", \
- proc_info: gdth_proc_info, \
- name: "GDT SCSI Disk Array Controller",\
- detect: gdth_detect, \
- release: gdth_release, \
- info: gdth_info, \
- command: NULL, \
- queuecommand: gdth_queuecommand, \
- eh_abort_handler: gdth_eh_abort, \
- eh_device_reset_handler: gdth_eh_device_reset, \
- eh_bus_reset_handler: gdth_eh_bus_reset, \
- eh_host_reset_handler: gdth_eh_host_reset, \
- abort: gdth_abort, \
- reset: gdth_reset, \
- bios_param: gdth_bios_param, \
- can_queue: GDTH_MAXCMDS, \
- this_id: -1, \
- sg_tablesize: GDTH_MAXSG, \
- cmd_per_lun: GDTH_MAXC_P_L, \
- present: 0, \
- unchecked_isa_dma: 1, \
- use_clustering: ENABLE_CLUSTERING, \
- use_new_eh_code: 1 /* use new error code */ }
+#define GDTH { .proc_name = "gdth", \
+ .proc_info = gdth_proc_info, \
+ .name = "GDT SCSI Disk Array Controller",\
+ .detect = gdth_detect, \
+ .release = gdth_release, \
+ .info = gdth_info, \
+ .command = NULL, \
+ .queuecommand = gdth_queuecommand, \
+ .eh_abort_handler = gdth_eh_abort, \
+ .eh_device_reset_handler = gdth_eh_device_reset, \
+ .eh_bus_reset_handler = gdth_eh_bus_reset, \
+ .eh_host_reset_handler = gdth_eh_host_reset, \
+ .abort = gdth_abort, \
+ .reset = gdth_reset, \
+ .bios_param = gdth_bios_param, \
+ .can_queue = GDTH_MAXCMDS, \
+ .this_id = -1, \
+ .sg_tablesize = GDTH_MAXSG, \
+ .cmd_per_lun = GDTH_MAXC_P_L, \
+ .present = 0, \
+ .unchecked_isa_dma = 1, \
+ .use_clustering = ENABLE_CLUSTERING, \
+ .use_new_eh_code = 1 /* use new error code */ }
#elif LINUX_VERSION_CODE >= 0x02015F
int gdth_bios_param(Disk *,kdev_t,int *);
@@ -1045,29 +1045,29 @@
int gdth_eh_device_reset(Scsi_Cmnd *scp);
int gdth_eh_bus_reset(Scsi_Cmnd *scp);
int gdth_eh_host_reset(Scsi_Cmnd *scp);
-#define GDTH { proc_dir: &proc_scsi_gdth, \
- proc_info: gdth_proc_info, \
- name: "GDT SCSI Disk Array Controller",\
- detect: gdth_detect, \
- release: gdth_release, \
- info: gdth_info, \
- command: NULL, \
- queuecommand: gdth_queuecommand, \
- eh_abort_handler: gdth_eh_abort, \
- eh_device_reset_handler: gdth_eh_device_reset, \
- eh_bus_reset_handler: gdth_eh_bus_reset, \
- eh_host_reset_handler: gdth_eh_host_reset, \
- abort: gdth_abort, \
- reset: gdth_reset, \
- bios_param: gdth_bios_param, \
- can_queue: GDTH_MAXCMDS, \
- this_id: -1, \
- sg_tablesize: GDTH_MAXSG, \
- cmd_per_lun: GDTH_MAXC_P_L, \
- present: 0, \
- unchecked_isa_dma: 1, \
- use_clustering: ENABLE_CLUSTERING, \
- use_new_eh_code: 1 /* use new error code */ }
+#define GDTH { .proc_dir = &proc_scsi_gdth, \
+ .proc_info = gdth_proc_info, \
+ .name = "GDT SCSI Disk Array Controller",\
+ .detect = gdth_detect, \
+ .release = gdth_release, \
+ .info = gdth_info, \
+ .command = NULL, \
+ .queuecommand = gdth_queuecommand, \
+ .eh_abort_handler = gdth_eh_abort, \
+ .eh_device_reset_handler = gdth_eh_device_reset, \
+ .eh_bus_reset_handler = gdth_eh_bus_reset, \
+ .eh_host_reset_handler = gdth_eh_host_reset, \
+ .abort = gdth_abort, \
+ .reset = gdth_reset, \
+ .bios_param = gdth_bios_param, \
+ .can_queue = GDTH_MAXCMDS, \
+ .this_id = -1, \
+ .sg_tablesize = GDTH_MAXSG, \
+ .cmd_per_lun = GDTH_MAXC_P_L, \
+ .present = 0, \
+ .unchecked_isa_dma = 1, \
+ .use_clustering = ENABLE_CLUSTERING, \
+ .use_new_eh_code = 1 /* use new error code */ }
#elif LINUX_VERSION_CODE >= 0x010300
int gdth_bios_param(Disk *,kdev_t,int *);
diff -Nru linux-2.5.66.orig/drivers/scsi/sym53c8xx_2/sym53c8xx.h linux-2.5.66/drivers/scsi/sym53c8xx_2/sym53c8xx.h
--- linux-2.5.66.orig/drivers/scsi/sym53c8xx_2/sym53c8xx.h 2003-03-05 04:29:55.000000000 +0100
+++ linux-2.5.66/drivers/scsi/sym53c8xx_2/sym53c8xx.h 2003-04-07 20:51:05.000000000 +0200
@@ -106,22 +106,22 @@
#include <scsi/scsicam.h>
#define SYM53C8XX { \
- name: "sym53c8xx", \
- detect: sym53c8xx_detect, \
- release: sym53c8xx_release, \
- info: sym53c8xx_info, \
- queuecommand: sym53c8xx_queue_command, \
- slave_configure: sym53c8xx_slave_configure, \
- eh_abort_handler: sym53c8xx_eh_abort_handler, \
- eh_device_reset_handler:sym53c8xx_eh_device_reset_handler, \
- eh_bus_reset_handler: sym53c8xx_eh_bus_reset_handler, \
- eh_host_reset_handler: sym53c8xx_eh_host_reset_handler, \
- can_queue: 0, \
- this_id: 7, \
- sg_tablesize: 0, \
- cmd_per_lun: 0, \
- use_clustering: DISABLE_CLUSTERING, \
- highmem_io: 1}
+ .name = "sym53c8xx", \
+ .detect = sym53c8xx_detect, \
+ .release = sym53c8xx_release, \
+ .info = sym53c8xx_info, \
+ .queuecommand = sym53c8xx_queue_command, \
+ .slave_configure = sym53c8xx_slave_configure, \
+ .eh_abort_handler = sym53c8xx_eh_abort_handler, \
+ .eh_device_reset_handler:sym53c8xx_eh_device_reset_handler, \
+ .eh_bus_reset_handler = sym53c8xx_eh_bus_reset_handler, \
+ .eh_host_reset_handler = sym53c8xx_eh_host_reset_handler, \
+ .can_queue = 0, \
+ .this_id = 7, \
+ .sg_tablesize = 0, \
+ .cmd_per_lun = 0, \
+ .use_clustering = DISABLE_CLUSTERING, \
+ .highmem_io = 1}
#endif /* defined(HOSTS_C) || defined(MODULE) */
diff -Nru linux-2.5.66.orig/sound/pci/ac97/ac97_codec.c linux-2.5.66/sound/pci/ac97/ac97_codec.c
--- linux-2.5.66.orig/sound/pci/ac97/ac97_codec.c 2003-04-07 20:57:26.000000000 +0200
+++ linux-2.5.66/sound/pci/ac97/ac97_codec.c 2003-04-07 20:52:53.000000000 +0200
@@ -1058,11 +1058,11 @@
static const snd_kcontrol_new_t snd_ac97_ad1980_spdif_source =
{
- iface: SNDRV_CTL_ELEM_IFACE_MIXER,
- name: SNDRV_CTL_NAME_IEC958("",PLAYBACK,NONE) "Source",
- info: snd_ac97_ad1980_spdif_source_info,
- get: snd_ac97_ad1980_spdif_source_get,
- put: snd_ac97_ad1980_spdif_source_put,
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,NONE) "Source",
+ .info = snd_ac97_ad1980_spdif_source_info,
+ .get = snd_ac97_ad1980_spdif_source_get,
+ .put = snd_ac97_ad1980_spdif_source_put,
};
next prev parent reply other threads:[~2003-04-07 19:05 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-04-05 14:21 [PATCH] C99 Initialisers for drivers/video Maciej Soltysiak
2003-04-05 18:51 ` James Simmons
2003-04-07 19:16 ` Maciej Soltysiak [this message]
2003-04-23 12:38 ` [RESEND][PATCH] net/ipv6/netfilter warnings removal Maciej Soltysiak
2003-04-24 4:50 ` David S. Miller
2003-04-27 13:12 ` Harald Welte
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.51.0304072115010.19830@dns.toxicfilms.tv \
--to=solt@dns.toxicfilms.tv \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).