From: dean gaudet <dean-list-linux-kernel@arctic.org>
To: Andries Brouwer <aebr@win.tue.nl>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.6.0-test2 has i8042 mux problems
Date: Tue, 29 Jul 2003 15:51:04 -0700 (PDT) [thread overview]
Message-ID: <Pine.LNX.4.53.0307291521520.24801@twinlark.arctic.org> (raw)
In-Reply-To: <20030728035920.GA1660@win.tue.nl>
On Mon, 28 Jul 2003, Andries Brouwer wrote:
> On Sun, Jul 27, 2003 at 07:13:26PM -0700, dean gaudet wrote:
>
> > i've got a box on which 2.4.x works fine, but 2.6.0-test2 gets into a snit
> > when it's trying to initialize the i8042. i can get 2.6.0-test2 to boot
> > if i add "i8042_nomux".
>
> What hardware do you have? And what is the conversation?
this system has an ali1563 (it's a development board for a new processor).
hope this helps -- i enabled DEBUG in i8042.c:
Loading test..........................
BIOS data check successful
Linux version 2.6.0-test2 (root@zim) (gcc version 3.2.3 (Debian)) #2 Tue Jul 29 12:51:24 PDT 2003
[...snip...]
mice: PS/2 mouse device common for all mice
drivers/input/serio/i8042.c: 20 -> i8042 (command) [0]
drivers/input/serio/i8042.c: 47 <- i8042 (return) [0]
drivers/input/serio/i8042.c: 60 -> i8042 (command) [30]
drivers/input/serio/i8042.c: 56 -> i8042 (parameter) [30]
drivers/input/serio/i8042.c: d3 -> i8042 (command) [61]
drivers/input/serio/i8042.c: f0 -> i8042 (parameter) [61]
drivers/input/serio/i8042.c: 0f <- i8042 (return) [61]
drivers/input/serio/i8042.c: d3 -> i8042 (command) [107]
drivers/input/serio/i8042.c: 56 -> i8042 (parameter) [107]
drivers/input/serio/i8042.c: a9 <- i8042 (return) [107]
drivers/input/serio/i8042.c: d3 -> i8042 (command) [154]
drivers/input/serio/i8042.c: a4 -> i8042 (parameter) [154]
drivers/input/serio/i8042.c: ee <- i8042 (return) [154]
i8042.c: Detected active multiplexing controller, rev 1.1.
drivers/input/serio/i8042.c: 60 -> i8042 (command) [217]
drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [217]
drivers/input/serio/i8042.c: 90 -> i8042 (command) [248]
drivers/input/serio/i8042.c: a8 -> i8042 (command) [264]
drivers/input/serio/i8042.c: 91 -> i8042 (command) [279]
drivers/input/serio/i8042.c: a8 -> i8042 (command) [295]
drivers/input/serio/i8042.c: 92 -> i8042 (command) [311]
drivers/input/serio/i8042.c: a8 -> i8042 (command) [326]
drivers/input/serio/i8042.c: 93 -> i8042 (command) [342]
drivers/input/serio/i8042.c: a8 -> i8042 (command) [357]
drivers/input/serio/i8042.c: 60 -> i8042 (command) [373]
drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [373]
drivers/input/serio/i8042.c: 60 -> i8042 (command) [404]
drivers/input/serio/i8042.c: 02 -> i8042 (parameter) [404]
drivers/input/serio/i8042.c: 90 -> i8042 (command) [436]
drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [436]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux0, 12, timeout) [480]
drivers/input/serio/i8042.c: 90 -> i8042 (command) [501]
drivers/input/serio/i8042.c: ed -> i8042 (parameter) [501]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux0, 12, timeout) [544]
drivers/input/serio/i8042.c: 60 -> i8042 (command) [565]
drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [565]
drivers/input/serio/i8042.c: 60 -> i8042 (command) [597]
drivers/input/serio/i8042.c: 02 -> i8042 (parameter) [597]
drivers/input/serio/i8042.c: 90 -> i8042 (command) [629]
drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [629]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux0, 12, timeout) [673]
drivers/input/serio/i8042.c: 60 -> i8042 (command) [693]
drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [693]
serio: i8042 AUX0 port at 0x60,0x64 irq 12
drivers/input/serio/i8042.c: 60 -> i8042 (command) [737]
drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [737]
drivers/input/serio/i8042.c: 60 -> i8042 (command) [768]
drivers/input/serio/i8042.c: 02 -> i8042 (parameter) [768]
drivers/input/serio/i8042.c: 91 -> i8042 (command) [800]
drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [800]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux1, 12, timeout) [844]
drivers/input/serio/i8042.c: 91 -> i8042 (command) [865]
drivers/input/serio/i8042.c: ed -> i8042 (parameter) [865]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux1, 12, timeout) [910]
drivers/input/serio/i8042.c: 60 -> i8042 (command) [931]
drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [931]
drivers/input/serio/i8042.c: 60 -> i8042 (command) [962]
drivers/input/serio/i8042.c: 02 -> i8042 (parameter) [962]
drivers/input/serio/i8042.c: 91 -> i8042 (command) [994]
drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [994]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux1, 12, timeout) [1038]
drivers/input/serio/i8042.c: 60 -> i8042 (command) [1059]
drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [1059]
serio: i8042 AUX1 port at 0x60,0x64 irq 12
drivers/input/serio/i8042.c: 60 -> i8042 (command) [1103]
drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [1103]
drivers/input/serio/i8042.c: 60 -> i8042 (command) [1135]
drivers/input/serio/i8042.c: 02 -> i8042 (parameter) [1135]
drivers/input/serio/i8042.c: 92 -> i8042 (command) [1168]
drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [1168]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 12, bad parity) [1206]
atkbd.c: frame/parity error: 02
drivers/input/serio/i8042.c: 92 -> i8042 (command) [1237]
drivers/input/serio/i8042.c: fe -> i8042 (parameter) [1237]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 0, bad parity) [1269]
atkbd.c: frame/parity error: 02
drivers/input/serio/i8042.c: 92 -> i8042 (command) [1299]
drivers/input/serio/i8042.c: fe -> i8042 (parameter) [1299]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 0, bad parity) [1332]
atkbd.c: frame/parity error: 02
drivers/input/serio/i8042.c: 92 -> i8042 (command) [1362]
drivers/input/serio/i8042.c: fe -> i8042 (parameter) [1362]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 0, bad parity) [1394]
atkbd.c: frame/parity error: 02
drivers/input/serio/i8042.c: 92 -> i8042 (command) [1425]
drivers/input/serio/i8042.c: fe -> i8042 (parameter) [1425]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 0, bad parity) [1457]
atkbd.c: frame/parity error: 02
drivers/input/serio/i8042.c: 92 -> i8042 (command) [1488]
drivers/input/serio/i8042.c: fe -> i8042 (parameter) [1488]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 0, bad parity) [1520]
atkbd.c: frame/parity error: 02
drivers/input/serio/i8042.c: 92 -> i8042 (command) [1550]
drivers/input/serio/i8042.c: fe -> i8042 (parameter) [1550]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 0, bad parity) [1582]
atkbd.c: frame/parity error: 02
drivers/input/serio/i8042.c: 92 -> i8042 (command) [1613]
drivers/input/serio/i8042.c: fe -> i8042 (parameter) [1613]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 0, bad parity) [1645]
atkbd.c: frame/parity error: 02
drivers/input/serio/i8042.c: 92 -> i8042 (command) [1675]
drivers/input/serio/i8042.c: fe -> i8042 (parameter) [1675]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 0, bad parity) [1708]
atkbd.c: frame/parity error: 02
drivers/input/serio/i8042.c: 92 -> i8042 (command) [1738]
drivers/input/serio/i8042.c: fe -> i8042 (parameter) [1738]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 0, bad parity) [1770]
atkbd.c: frame/parity error: 02
drivers/input/serio/i8042.c: 92 -> i8042 (command) [1801]
drivers/input/serio/i8042.c: fe -> i8042 (parameter) [1801]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 0, bad parity) [1833]
atkbd.c: frame/parity error: 02
drivers/input/serio/i8042.c: 92 -> i8042 (command) [1863]
drivers/input/serio/i8042.c: fe -> i8042 (parameter) [1863]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 0, bad parity) [1895]
atkbd.c: frame/parity error: 02
drivers/input/serio/i8042.c: 92 -> i8042 (command) [1926]
drivers/input/serio/i8042.c: fe -> i8042 (parameter) [1926]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 0, bad parity) [1958]
atkbd.c: frame/parity error: 02
drivers/input/serio/i8042.c: 92 -> i8042 (command) [1989]
drivers/input/serio/i8042.c: fe -> i8042 (parameter) [1989]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 0, bad parity) [2021]
atkbd.c: frame/parity error: 02
drivers/input/serio/i8042.c: 92 -> i8042 (command) [2051]
drivers/input/serio/i8042.c: fe -> i8042 (parameter) [2051]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 0, bad parity) [2083]
atkbd.c: frame/parity error: 02
drivers/input/serio/i8042.c: 92 -> i8042 (command) [2114]
drivers/input/serio/i8042.c: fe -> i8042 (parameter) [2114]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 0, bad parity) [2146]
atkbd.c: frame/parity error: 02
drivers/input/serio/i8042.c: 92 -> i8042 (command) [2176]
drivers/input/serio/i8042.c: fe -> i8042 (parameter) [2176]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 0, bad parity) [2208]
atkbd.c: frame/parity error: 02
drivers/input/serio/i8042.c: 92 -> i8042 (command) [2239]
drivers/input/serio/i8042.c: fe -> i8042 (parameter) [2239]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 0, bad parity) [2271]
atkbd.c: frame/parity error: 02
drivers/input/serio/i8042.c: 92 -> i8042 (command) [2302]
drivers/input/serio/i8042.c: fe -> i8042 (parameter) [2302]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 0, bad parity) [2334]
atkbd.c: frame/parity error: 02
drivers/input/serio/i8042.c: 92 -> i8042 (command) [2364]
drivers/input/serio/i8042.c: fe -> i8042 (parameter) [2364]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 0, bad parity) [2396]
atkbd.c: frame/parity error: 02
drivers/input/serio/i8042.c: 92 -> i8042 (command) [2427]
drivers/input/serio/i8042.c: fe -> i8042 (parameter) [2427]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 0, bad parity) [2459]
atkbd.c: frame/parity error: 02
drivers/input/serio/i8042.c: 92 -> i8042 (command) [2489]
drivers/input/serio/i8042.c: fe -> i8042 (parameter) [2489]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 0, bad parity) [2521]
atkbd.c: frame/parity error: 02
drivers/input/serio/i8042.c: 92 -> i8042 (command) [2552]
drivers/input/serio/i8042.c: fe -> i8042 (parameter) [2552]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 0, bad parity) [2584]
atkbd.c: frame/parity error: 02
drivers/input/serio/i8042.c: 92 -> i8042 (command) [2614]
drivers/input/serio/i8042.c: fe -> i8042 (parameter) [2614]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 0, bad parity) [2647]
atkbd.c: frame/parity error: 02
drivers/input/serio/i8042.c: 92 -> i8042 (command) [2678]
drivers/input/serio/i8042.c: fe -> i8042 (parameter) [2678]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 0, bad parity) [2710]
atkbd.c: frame/parity error: 02
drivers/input/serio/i8042.c: 92 -> i8042 (command) [2741]
drivers/input/serio/i8042.c: fe -> i8042 (parameter) [2741]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 0, bad parity) [2773]
atkbd.c: frame/parity error: 02
drivers/input/serio/i8042.c: 92 -> i8042 (command) [2803]
drivers/input/serio/i8042.c: fe -> i8042 (parameter) [2803]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 0, bad parity) [2835]
atkbd.c: frame/parity error: 02
drivers/input/serio/i8042.c: 92 -> i8042 (command) [2866]
drivers/input/serio/i8042.c: fe -> i8042 (parameter) [2866]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 0, bad parity) [2898]
atkbd.c: frame/parity error: 02
drivers/input/serio/i8042.c: 92 -> i8042 (command) [2929]
drivers/input/serio/i8042.c: fe -> i8042 (parameter) [2929]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 0, bad parity) [2961]
atkbd.c: frame/parity error: 02
drivers/input/serio/i8042.c: 92 -> i8042 (command) [2992]
drivers/input/serio/i8042.c: fe -> i8042 (parameter) [2992]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 0, bad parity) [3024]
atkbd.c: frame/parity error: 02
drivers/input/serio/i8042.c: 92 -> i8042 (command) [3054]
drivers/input/serio/i8042.c: fe -> i8042 (parameter) [3054]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 0, bad parity) [3086]
atkbd.c: frame/parity error: 02
drivers/input/serio/i8042.c: 92 -> i8042 (command) [3117]
drivers/input/serio/i8042.c: fe -> i8042 (parameter) [3117]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 0, bad parity) [3149]
atkbd.c: frame/parity error: 02
drivers/input/serio/i8042.c: 92 -> i8042 (command) [3179]
drivers/input/serio/i8042.c: fe -> i8042 (parameter) [3179]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 0, bad parity) [3211]
atkbd.c: frame/parity error: 02
drivers/input/serio/i8042.c: 92 -> i8042 (command) [3242]
drivers/input/serio/i8042.c: fe -> i8042 (parameter) [3242]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 0, bad parity) [3274]
atkbd.c: frame/parity error: 02
drivers/input/serio/i8042.c: 92 -> i8042 (command) [3305]
drivers/input/serio/i8042.c: fe -> i8042 (parameter) [3305]
drivers/inp<1>Unable to handle kernel NULL pointer dereference at virtual address 0000001d
printing eip:
c0118b0a
*pde = 00000000
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[<c0118b0a>] Not tainted
EFLAGS: 00010007
EIP is at scheduler_tick+0x6a/0x340
eax: 00000000 ebx: 00000001 ecx: 00000001 edx: 00000000
esi: 00000001 edi: 00000000 ebp: dbe9002c esp: dbe90014
ds: 007b es: 007b ss: 0068
Process \x12À Ñ3ÀØ\x16>À (pid: -606380032, threadinfo=dbe8e000 task=dbe91240)
Stack: 00000007 00000000 00000000 00000000 00000001 00000000 dbe9004c c0124466
00000000 00000001 00000001 00000000 dbe90000 dbe900c4 dbe9005c c0124695
00000000 dbe90000 dbe90074 c010fa92 dbe900c4 c033bd84 20000001 00000000
Call Trace:
[<c0124466>] update_process_times+0x46/0x50
[<c0124695>] do_timer+0x35/0xf0
[<c010fa92>] timer_interrupt+0x52/0x130
[<c010b72b>] handle_IRQ_event+0x3b/0x70
[<c010baac>] do_IRQ+0x9c/0x160
[<c0109e68>] common_interrupt+0x18/0x20
[<c01148e2>] delay_tsc+0x12/0x20
[<c021a544>] __delay+0x14/0x20
[<c023b192>] serial8250_console_write+0xb2/0x280
[<c011cd00>] __call_console_drivers+0x60/0x70
[<c011ce00>] call_console_drivers+0x80/0x120
[<c011d14f>] release_console_sem+0x5f/0xe0
[<c011d028>] printk+0x118/0x180
[<c0283a48>] i8042_interrupt+0x198/0x3b0
[<c0123e96>] mod_timer+0x136/0x190
[<c0114835>] mark_offset_tsc+0x205/0x2a0
[<c0124466>] update_process_times+0x46/0x50
[<c01245a2>] run_timer_softirq+0x112/0x1c0
[<c0124740>] do_timer+0xe0/0xf0
[<c010bb27>] do_IRQ+0x117/0x160
[<c0109e68>] common_interrupt+0x18/0x20
[<c01191b0>] preempt_schedule+0x0/0x50
[<c028351b>] i8042_command+0x6b/0x180
[<c0283702>] i8042_aux_write+0x52/0x70
[<c02804ef>] atkbd_interrupt+0x21f/0x230
[<c011d028>] printk+0x118/0x180
[<c0282fda>] serio_interrupt+0x5a/0x60
[<c0283a79>] i8042_interrupt+0x1c9/0x3b0
[<c0123e96>] mod_timer+0x136/0x190
[<c0114835>] mark_offset_tsc+0x205/0x2a0
[<c0124466>] update_process_times+0x46/0x50
[<c01245a2>] run_timer_softirq+0x112/0x1c0
[<c010bb27>] do_IRQ+0x117/0x160
[<c0109e68>] common_interrupt+0x18/0x20
[<c01191b0>] preempt_schedule+0x0/0x50
[<c028351b>] i8042_command+0x6b/0x180
[<c0283702>] i8042_aux_write+0x52/0x70
[<c02804ef>] atkbd_interrupt+0x21f/0x230
[<c011d028>] printk+0x118/0x180
[<c0282fda>] serio_interrupt+0x5a/0x60
[<c0283a79>] i8042_interrupt+0x1c9/0x3b0
[<c0123e96>] mod_timer+0x136/0x190
[<c0114835>] mark_offset_tsc+0x205/0x2a0
[<c0124466>] update_process_times+0x46/0x50
[<c01245a2>] run_timer_softirq+0x112/0x1c0
[<c0124740>] do_timer+0xe0/0xf0
[<c010bb27>] do_IRQ+0x117/0x160
[<c0109e68>] common_interrupt+0x18/0x20
[<c01191b0>] preempt_schedule+0x0/0x50
[<c028351b>] i8042_command+0x6b/0x180
[<c0283702>] i8042_aux_write+0x52/0x70
[<c02804ef>] atkbd_interrupt+0x21f/0x230
[<c011d028>] printk+0x118/0x180
[<c0282fda>] serio_interrupt+0x5a/0x60
[<c0283a79>] i8042_interrupt+0x1c9/0x3b0
[<c0123e96>] mod_timer+0x136/0x190
[<c0114835>] mark_offset_tsc+0x205/0x2a0
[<c0124466>] update_process_times+0x46/0x50
[<c01245a2>] run_timer_softirq+0x112/0x1c0
[<c010bb27>] do_IRQ+0x117/0x160
[<c0109e68>] common_interrupt+0x18/0x20
[<c01191b0>] preempt_schedule+0x0/0x50
[<c028351b>] i8042_command+0x6b/0x180
[<c0283702>] i8042_aux_write+0x52/0x70
[<c02804ef>] atkbd_interrupt+0x21f/0x230
[<c011d028>] printk+0x118/0x180
[<c0282fda>] serio_interrupt+0x5a/0x60
[<c0283a79>] i8042_interrupt+0x1c9/0x3b0
[<c0123e96>] mod_timer+0x136/0x190
[<c0114835>] mark_offset_tsc+0x205/0x2a0
[<c0124466>] update_process_times+0x46/0x50
[<c01245a2>] run_timer_softirq+0x112/0x1c0
[<c0124740>] do_timer+0xe0/0xf0
[<c010bb27>] do_IRQ+0x117/0x160
[<c0109e68>] common_interrupt+0x18/0x20
[<c01191b0>] preempt_schedule+0x0/0x50
[<c028351b>] i8042_command+0x6b/0x180
[<c0283702>] i8042_aux_write+0x52/0x70
[<c02804ef>] atkbd_interrupt+0x21f/0x230
[<c011d028>] printk+0x118/0x180
[<c0282fda>] serio_interrupt+0x5a/0x60
[<c0283a79>] i8042_interrupt+0x1c9/0x3b0
[<c0123e96>] mod_timer+0x136/0x190
[<c0114835>] mark_offset_tsc+0x205/0x2a0
[<c0124466>] update_process_times+0x46/0x50
[<c01245a2>] run_timer_softirq+0x112/0x1c0
[<c010bb27>] do_IRQ+0x117/0x160
[<c0109e68>] common_interrupt+0x18/0x20
[<c01191b0>] preempt_schedule+0x0/0x50
[<c028351b>] i8042_command+0x6b/0x180
[<c0283702>] i8042_aux_write+0x52/0x70
[<c02804ef>] atkbd_interrupt+0x21f/0x230
[<c011d028>] printk+0x118/0x180
[<c0282fda>] serio_interrupt+0x5a/0x60
[<c0283a79>] i8042_interrupt+0x1c9/0x3b0
[<c0123e96>] mod_timer+0x136/0x190
[<c0114835>] mark_offset_tsc+0x205/0x2a0
[<c0124466>] update_process_times+0x46/0x50
[<c01245a2>] run_timer_softirq+0x112/0x1c0
[<c0124740>] do_timer+0xe0/0xf0
[<c010bb27>] do_IRQ+0x117/0x160
[<c0109e68>] common_interrupt+0x18/0x20
[<c01191b0>] preempt_schedule+0x0/0x50
[<c028351b>] i8042_command+0x6b/0x180
[<c0283702>] i8042_aux_write+0x52/0x70
[<c02804ef>] atkbd_interrupt+0x21f/0x230
[<c011d028>] printk+0x118/0x180
[<c0282fda>] serio_interrupt+0x5a/0x60
[<c0283a79>] i8042_interrupt+0x1c9/0x3b0
[<c0123e96>] mod_timer+0x136/0x190
[<c0114835>] mark_offset_tsc+0x205/0x2a0
[<c0124466>] update_process_times+0x46/0x50
[<c01245a2>] run_timer_softirq+0x112/0x1c0
[<c010bb27>] do_IRQ+0x117/0x160
[<c0109e68>] common_interrupt+0x18/0x20
[<c01191b0>] preempt_schedule+0x0/0x50
[<c028351b>] i8042_command+0x6b/0x180
[<c0283702>] i8042_aux_write+0x52/0x70
[<c02804ef>] atkbd_interrupt+0x21f/0x230
[<c011d028>] printk+0x118/0x180
[<c0282fda>] serio_interrupt+0x5a/0x60
[<c0283a79>] i8042_interrupt+0x1c9/0x3b0
[<c0123e96>] mod_timer+0x136/0x190
[<c0114835>] mark_offset_tsc+0x205/0x2a0
[<c0124466>] update_process_times+0x46/0x50
[<c01245a2>] run_timer_softirq+0x112/0x1c0
[<c0124740>] do_timer+0xe0/0xf0
[<c010bb27>] do_IRQ+0x117/0x160
[<c0109e68>] common_interrupt+0x18/0x20
[<c01191b0>] preempt_schedule+0x0/0x50
[<c028351b>] i8042_command+0x6b/0x180
[<c0283702>] i8042_aux_write+0x52/0x70
[<c02804ef>] atkbd_interrupt+0x21f/0x230
[<c011d028>] printk+0x118/0x180
[<c0282fda>] serio_interrupt+0x5a/0x60
[<c0283a79>] i8042_interrupt+0x1c9/0x3b0
[<c0123e96>] mod_timer+0x136/0x190
[<c0114835>] mark_offset_tsc+0x205/0x2a0
[<c0124466>] update_process_times+0x46/0x50
[<c01245a2>] run_timer_softirq+0x112/0x1c0
[<c010bb27>] do_IRQ+0x117/0x160
[<c0109e68>] common_interrupt+0x18/0x20
[<c01191b0>] preempt_schedule+0x0/0x50
[<c028351b>] i8042_command+0x6b/0x180
[<c0283702>] i8042_aux_write+0x52/0x70
[<c02804ef>] atkbd_interrupt+0x21f/0x230
[<c011d028>] printk+0x118/0x180
[<c0282fda>] serio_interrupt+0x5a/0x60
[<c0283a79>] i8042_interrupt+0x1c9/0x3b0
[<c0123e96>] mod_timer+0x136/0x190
[<c0114835>] mark_offset_tsc+0x205/0x2a0
[<c0124466>] update_process_times+0x46/0x50
[<c01245a2>] run_timer_softirq+0x112/0x1c0
[<c0124740>] do_timer+0xe0/0xf0
[<c010bb27>] do_IRQ+0x117/0x160
[<c0109e68>] common_interrupt+0x18/0x20
[<c01191b0>] preempt_schedule+0x0/0x50
[<c028351b>] i8042_command+0x6b/0x180
[<c0283702>] i8042_aux_write+0x52/0x70
[<c02804ef>] atkbd_interrupt+0x21f/0x230
[<c011d028>] printk+0x118/0x180
[<c0282fda>] serio_interrupt+0x5a/0x60
[<c0283a79>] i8042_interrupt+0x1c9/0x3b0
[<c0123e96>] mod_timer+0x136/0x190
[<c0114835>] mark_offset_tsc+0x205/0x2a0
[<c0124466>] update_process_times+0x46/0x50
[<c01245a2>] run_timer_softirq+0x112/0x1c0
[<c010bb27>] do_IRQ+0x117/0x160
[<c0109e68>] common_interrupt+0x18/0x20
[<c01191b0>] preempt_schedule+0x0/0x50
[<c028351b>] i8042_command+0x6b/0x180
[<c0283702>] i8042_aux_write+0x52/0x70
[<c02804ef>] atkbd_interrupt+0x21f/0x230
[<c011d028>] printk+0x118/0x180
[<c0282fda>] serio_interrupt+0x5a/0x60
[<c0283a79>] i8042_interrupt+0x1c9/0x3b0
[<c0123e96>] mod_timer+0x136/0x190
[<c0114835>] mark_offset_tsc+0x205/0x2a0
[<c0124466>] update_process_times+0x46/0x50
[<c01245a2>] run_timer_softirq+0x112/0x1c0
[<c0124740>] do_timer+0xe0/0xf0
[<c010bb27>] do_IRQ+0x117/0x160
[<c0109e68>] common_interrupt+0x18/0x20
[<c01191b0>] preempt_schedule+0x0/0x50
[<c028351b>] i8042_command+0x6b/0x180
[<c0283702>] i8042_aux_write+0x52/0x70
[<c02804ef>] atkbd_interrupt+0x21f/0x230
[<c011d028>] printk+0x118/0x180
[<c0282fda>] serio_interrupt+0x5a/0x60
[<c0283a79>] i8042_interrupt+0x1c9/0x3b0
[<c0123e96>] mod_timer+0x136/0x190
[<c0114835>] mark_offset_tsc+0x205/0x2a0
[<c0124466>] update_process_times+0x46/0x50
[<c01245a2>] run_timer_softirq+0x112/0x1c0
[<c010bb27>] do_IRQ+0x117/0x160
[<c0109e68>] common_interrupt+0x18/0x20
[<c01191b0>] preempt_schedule+0x0/0x50
[<c028351b>] i8042_command+0x6b/0x180
[<c0283702>] i8042_aux_write+0x52/0x70
[<c02804ef>] atkbd_interrupt+0x21f/0x230
[<c011d028>] printk+0x118/0x180
[<c0282fda>] serio_interrupt+0x5a/0x60
[<c0283a79>] i8042_interrupt+0x1c9/0x3b0
[<c0123e96>] mod_timer+0x136/0x190
[<c0114835>] mark_offset_tsc+0x205/0x2a0
[<c0124466>] update_process_times+0x46/0x50
[<c01245a2>] run_timer_softirq+0x112/0x1c0
[<c0124740>] do_timer+0xe0/0xf0
[<c010bb27>] do_IRQ+0x117/0x160
[<c0109e68>] common_interrupt+0x18/0x20
[<c01191b0>] preempt_schedule+0x0/0x50
[<c028351b>] i8042_command+0x6b/0x180
[<c0283702>] i8042_aux_write+0x52/0x70
[<c02804ef>] atkbd_interrupt+0x21f/0x230
[<c011d028>] printk+0x118/0x180
[<c0282fda>] serio_interrupt+0x5a/0x60
[<c0283a79>] i8042_interrupt+0x1c9/0x3b0
[<c0123e96>] mod_timer+0x136/0x190
[<c0114835>] mark_offset_tsc+0x205/0x2a0
[<c0124466>] update_process_times+0x46/0x50
[<c01245a2>] run_timer_softirq+0x112/0x1c0
[<c010bb27>] do_IRQ+0x117/0x160
[<c0109e68>] common_interrupt+0x18/0x20
[<c01191b0>] preempt_schedule+0x0/0x50
[<c028351b>] i8042_command+0x6b/0x180
[<c0283702>] i8042_aux_write+0x52/0x70
[<c02804ef>] atkbd_interrupt+0x21f/0x230
[<c011d028>] printk+0x118/0x180
[<c0282fda>] serio_interrupt+0x5a/0x60
[<c0283a79>] i8042_interrupt+0x1c9/0x3b0
[<c0123e96>] mod_timer+0x136/0x190
[<c0114835>] mark_offset_tsc+0x205/0x2a0
[<c0124466>] update_process_times+0x46/0x50
[<c01245a2>] run_timer_softirq+0x112/0x1c0
[<c0124740>] do_timer+0xe0/0xf0
[<c010bb27>] do_IRQ+0x117/0x160
[<c0109e68>] common_interrupt+0x18/0x20
[<c01191b0>] preempt_schedule+0x0/0x50
[<c028351b>] i8042_command+0x6b/0x180
[<c0283702>] i8042_aux_write+0x52/0x70
[<c02804ef>] atkbd_interrupt+0x21f/0x230
[<c011d028>] printk+0x118/0x180
[<c0282fda>] serio_interrupt+0x5a/0x60
[<c0283a79>] i8042_interrupt+0x1c9/0x3b0
[<c0123e96>] mod_timer+0x136/0x190
[<c0114835>] mark_offset_tsc+0x205/0x2a0
[<c0124466>] update_process_times+0x46/0x50
[<c01242d6>] update_wall_time+0x16/0x40
[<c0124740>] do_timer+0xe0/0xf0
[<c010fb28>] timer_interrupt+0xe8/0x130
next prev parent reply other threads:[~2003-07-29 22:51 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-07-28 2:13 2.6.0-test2 has i8042 mux problems dean gaudet
2003-07-28 3:59 ` Andries Brouwer
2003-07-29 22:51 ` dean gaudet [this message]
2003-07-30 0:25 ` Andries Brouwer
2003-07-28 5:26 ` Claas Langbehn
2003-07-28 11:36 ` Andries Brouwer
2003-07-28 20:35 ` Claas Langbehn
2003-07-28 21:09 ` Claas Langbehn
2003-07-28 22:58 ` Andries Brouwer
2003-07-29 7:53 ` Claas Langbehn
2003-07-28 14:29 ` Stefan Reinauer
2003-07-28 16:38 ` dean gaudet
2003-08-12 20:56 ` Vojtech Pavlik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.53.0307291521520.24801@twinlark.arctic.org \
--to=dean-list-linux-kernel@arctic.org \
--cc=aebr@win.tue.nl \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).