* What exactly are the issues with 2.6.0-test10 preempt?
@ 2003-11-24 19:14 Bradley Chapman
2003-11-24 21:08 ` Guennadi Liakhovetski
2003-11-30 9:09 ` Matthias Urlichs
0 siblings, 2 replies; 28+ messages in thread
From: Bradley Chapman @ 2003-11-24 19:14 UTC (permalink / raw)
To: linux-kernel
I saw in Linus' 2.6.0-test10 announcement that preempt is suffering from some
problems and should not be used. However, I am currently running 2.6.0-test10
with CONFIG_PREEMPT=y and nothing has appeared yet. To see if the problem appeared
under stress, I started an A/V trailer playback with mplayer and then ran the
find command on both my home directory and the 2.6.0-test10 kernel source directory,
with the expected result - mplayer did not skip, neither find invocation broke,
and there were no nasty errors in dmesg.
So what exactly is the problem?
I can provide more system info on request.
TIA
Brad
=====
__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: What exactly are the issues with 2.6.0-test10 preempt?
2003-11-24 19:14 What exactly are the issues with 2.6.0-test10 preempt? Bradley Chapman
@ 2003-11-24 21:08 ` Guennadi Liakhovetski
2003-11-24 21:29 ` Bradley Chapman
2003-11-24 21:59 ` Linus Torvalds
2003-11-30 9:09 ` Matthias Urlichs
1 sibling, 2 replies; 28+ messages in thread
From: Guennadi Liakhovetski @ 2003-11-24 21:08 UTC (permalink / raw)
To: Bradley Chapman; +Cc: linux-kernel
On Mon, 24 Nov 2003, Bradley Chapman wrote:
> I saw in Linus' 2.6.0-test10 announcement that preempt is suffering from some
> problems and should not be used. However, I am currently running 2.6.0-test10
> with CONFIG_PREEMPT=y and nothing has appeared yet. To see if the problem appeared
> under stress, I started an A/V trailer playback with mplayer and then ran the
> find command on both my home directory and the 2.6.0-test10 kernel source directory,
> with the expected result - mplayer did not skip, neither find invocation broke,
> and there were no nasty errors in dmesg.
>
> So what exactly is the problem?
Well, FWIW, I'm getting 100% reproducible Oopses on __boot__ by enabling
preemption AND (almost) all kernel-hacking CONFIG_DEBUG_* options - see my
post of 21.11.2003 with subject "[OOPS] 2.6.0-test7 + preempt + hacking".
If required, could try to narrow it down to 1 CONFIG option. However, the
Oops itself happens somewhere in NFS code (see backtrace in above email
for details).
Guennadi
---
Guennadi Liakhovetski
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: What exactly are the issues with 2.6.0-test10 preempt?
2003-11-24 21:08 ` Guennadi Liakhovetski
@ 2003-11-24 21:29 ` Bradley Chapman
2003-11-24 21:47 ` Guennadi Liakhovetski
2003-11-24 21:59 ` Linus Torvalds
1 sibling, 1 reply; 28+ messages in thread
From: Bradley Chapman @ 2003-11-24 21:29 UTC (permalink / raw)
To: Guennadi Liakhovetski; +Cc: linux-kernel
Mr. Liakhovetski,
--- Guennadi Liakhovetski <g.liakhovetski@gmx.de> wrote:
> On Mon, 24 Nov 2003, Bradley Chapman wrote:
>
> > I saw in Linus' 2.6.0-test10 announcement that preempt is suffering from some
> > problems and should not be used. However, I am currently running 2.6.0-test10
> > with CONFIG_PREEMPT=y and nothing has appeared yet. To see if the problem
> appeared
> > under stress, I started an A/V trailer playback with mplayer and then ran the
> > find command on both my home directory and the 2.6.0-test10 kernel source
> directory,
> > with the expected result - mplayer did not skip, neither find invocation broke,
> > and there were no nasty errors in dmesg.
> >
> > So what exactly is the problem?
>
> Well, FWIW, I'm getting 100% reproducible Oopses on __boot__ by enabling
> preemption AND (almost) all kernel-hacking CONFIG_DEBUG_* options - see my
> post of 21.11.2003 with subject "[OOPS] 2.6.0-test7 + preempt + hacking".
> If required, could try to narrow it down to 1 CONFIG option. However, the
> Oops itself happens somewhere in NFS code (see backtrace in above email
> for details).
Hmmm. This is what I have enabled under "Kernel hacking":
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_IOVIRT=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_SPINLOCK=y
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_FRAME_POINTER is not set
CONFIG_X86_EXTRA_IRQS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
So far, though, not a single problem -- I was playing Flash animations while
printing a huge document without a single hiccup (I have an HP DeskJet 880C with
very little memory, so there was a lot of in-kernel activity).
>
> Guennadi
Brad
=====
__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: What exactly are the issues with 2.6.0-test10 preempt?
2003-11-24 21:29 ` Bradley Chapman
@ 2003-11-24 21:47 ` Guennadi Liakhovetski
2003-11-24 21:55 ` Bradley Chapman
0 siblings, 1 reply; 28+ messages in thread
From: Guennadi Liakhovetski @ 2003-11-24 21:47 UTC (permalink / raw)
To: Bradley Chapman; +Cc: linux-kernel
On Mon, 24 Nov 2003, Bradley Chapman wrote:
> Hmmm. This is what I have enabled under "Kernel hacking":
>
> #
> # Kernel hacking
> #
> CONFIG_DEBUG_KERNEL=y
> CONFIG_DEBUG_STACKOVERFLOW=y
> CONFIG_DEBUG_SLAB=y
> CONFIG_DEBUG_IOVIRT=y
> CONFIG_MAGIC_SYSRQ=y
> CONFIG_DEBUG_SPINLOCK=y
> # CONFIG_DEBUG_PAGEALLOC is not set
^^^^^^^^^^^^^^^^^^^^^^
Here's a candidate. I did have it on. Yes, I know it causes a slowdown -
that was for testing. I could try to double check, if disabling that
single option fixes the problem - but for that I'd need to recompile and
re-install kernel and modules... I also didn't have
CONFIG_DEBUG_STACKOVERFLOW switched on - but I don't think that could be
the reason.
> # CONFIG_DEBUG_INFO is not set
> CONFIG_DEBUG_SPINLOCK_SLEEP=y
> # CONFIG_FRAME_POINTER is not set
> CONFIG_X86_EXTRA_IRQS=y
> CONFIG_X86_FIND_SMP_CONFIG=y
> CONFIG_X86_MPPARSE=y
>
> So far, though, not a single problem -- I was playing Flash animations while
> printing a huge document without a single hiccup (I have an HP DeskJet 880C with
> very little memory, so there was a lot of in-kernel activity).
Guennadi
---
Guennadi Liakhovetski
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: What exactly are the issues with 2.6.0-test10 preempt?
2003-11-24 21:47 ` Guennadi Liakhovetski
@ 2003-11-24 21:55 ` Bradley Chapman
0 siblings, 0 replies; 28+ messages in thread
From: Bradley Chapman @ 2003-11-24 21:55 UTC (permalink / raw)
To: Guennadi Liakhovetski; +Cc: linux-kernel
Mr. Liakhovetski,
--- Guennadi Liakhovetski <g.liakhovetski@gmx.de> wrote:
> On Mon, 24 Nov 2003, Bradley Chapman wrote:
>
> > Hmmm. This is what I have enabled under "Kernel hacking":
> >
> > #
> > # Kernel hacking
> > #
> > CONFIG_DEBUG_KERNEL=y
> > CONFIG_DEBUG_STACKOVERFLOW=y
> > CONFIG_DEBUG_SLAB=y
> > CONFIG_DEBUG_IOVIRT=y
> > CONFIG_MAGIC_SYSRQ=y
> > CONFIG_DEBUG_SPINLOCK=y
> > # CONFIG_DEBUG_PAGEALLOC is not set
> ^^^^^^^^^^^^^^^^^^^^^^
>
> Here's a candidate. I did have it on. Yes, I know it causes a slowdown -
> that was for testing. I could try to double check, if disabling that
> single option fixes the problem - but for that I'd need to recompile and
> re-install kernel and modules... I also didn't have
> CONFIG_DEBUG_STACKOVERFLOW switched on - but I don't think that could be
> the reason.
I've never enabled CONFIG_DEBUG_PAGEALLOC - the slowdown bit in the help text
never gave me a warm&fuzzy. If CONFIG_PREEMPT=y && CONFIG_DEBUG_PAGEALLOC=y,
perhaps the pagealloc debug code is exposing a messed-up preempt somewhere near
a memory allocation (IANAKC).
I found the thread regarding slab Oopsen where Linus mentioned CONFIG_PREEMPT
as a possiblity, but I'm not experiencing any issues with -test10 or -test9-bk22.
So I don't think the bug in that thread is affecting me at all, if it hasn't been
fixed.
>
> > # CONFIG_DEBUG_INFO is not set
> > CONFIG_DEBUG_SPINLOCK_SLEEP=y
> > # CONFIG_FRAME_POINTER is not set
> > CONFIG_X86_EXTRA_IRQS=y
> > CONFIG_X86_FIND_SMP_CONFIG=y
> > CONFIG_X86_MPPARSE=y
> >
> > So far, though, not a single problem -- I was playing Flash animations while
> > printing a huge document without a single hiccup (I have an HP DeskJet 880C with
> > very little memory, so there was a lot of in-kernel activity).
>
> Guennadi
Brad
=====
__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: What exactly are the issues with 2.6.0-test10 preempt?
2003-11-24 21:08 ` Guennadi Liakhovetski
2003-11-24 21:29 ` Bradley Chapman
@ 2003-11-24 21:59 ` Linus Torvalds
2003-11-24 22:26 ` Bradley Chapman
` (2 more replies)
1 sibling, 3 replies; 28+ messages in thread
From: Linus Torvalds @ 2003-11-24 21:59 UTC (permalink / raw)
To: Guennadi Liakhovetski; +Cc: Bradley Chapman, linux-kernel
On Mon, 24 Nov 2003, Guennadi Liakhovetski wrote:
>
> Well, FWIW, I'm getting 100% reproducible Oopses on __boot__ by enabling
> preemption AND (almost) all kernel-hacking CONFIG_DEBUG_* options - see my
> post of 21.11.2003 with subject "[OOPS] 2.6.0-test7 + preempt + hacking".
> If required, could try to narrow it down to 1 CONFIG option.
I'd love to have more info - I actually looked at your original report,
and it's one of those "impossible" things as far as I can tell. The low
bit of the work "pending" flag should acts as a lock on workqueues, and
serialize access to one workqueue totally - so having it show up with a
pending timer is "strange" to say the least. The only two ways to clear
the "pending" timer is by running the work-queue - either for the timer to
have gone off (for the delayed case) _or_ the timer not to have evern been
set in the first place (for the immediate case).
So more information would be wonderful.
Linus
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: What exactly are the issues with 2.6.0-test10 preempt?
2003-11-24 21:59 ` Linus Torvalds
@ 2003-11-24 22:26 ` Bradley Chapman
2003-11-24 22:32 ` Linus Torvalds
2003-11-24 22:41 ` Måns Rullgård
2003-11-24 22:57 ` Guennadi Liakhovetski
2003-11-25 7:17 ` Guennadi Liakhovetski
2 siblings, 2 replies; 28+ messages in thread
From: Bradley Chapman @ 2003-11-24 22:26 UTC (permalink / raw)
To: Linus Torvalds; +Cc: linux-kernel
Mr. Torvalds,
--- Linus Torvalds <torvalds@osdl.org> wrote:
>
>
> On Mon, 24 Nov 2003, Guennadi Liakhovetski wrote:
> >
> > Well, FWIW, I'm getting 100% reproducible Oopses on __boot__ by enabling
> > preemption AND (almost) all kernel-hacking CONFIG_DEBUG_* options - see my
> > post of 21.11.2003 with subject "[OOPS] 2.6.0-test7 + preempt + hacking".
> > If required, could try to narrow it down to 1 CONFIG option.
>
> I'd love to have more info - I actually looked at your original report,
> and it's one of those "impossible" things as far as I can tell. The low
> bit of the work "pending" flag should acts as a lock on workqueues, and
> serialize access to one workqueue totally - so having it show up with a
> pending timer is "strange" to say the least. The only two ways to clear
> the "pending" timer is by running the work-queue - either for the timer to
> have gone off (for the delayed case) _or_ the timer not to have evern been
> set in the first place (for the immediate case).
>
> So more information would be wonderful.
What sort of information would you like me to provide, sir? The bug you're
discussing here isn't affecting me; CONFIG_PREEMPT has been solid on 2.6.0-test10.
This is on a Gateway 600S laptop with a P4-M 2Ghz processor and an i845 Brookdale
chipset.
>
> Linus
Brad
=====
__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: What exactly are the issues with 2.6.0-test10 preempt?
2003-11-24 22:26 ` Bradley Chapman
@ 2003-11-24 22:32 ` Linus Torvalds
2003-11-24 22:45 ` Bradley Chapman
2003-11-25 7:55 ` Jos Hulzink
2003-11-24 22:41 ` Måns Rullgård
1 sibling, 2 replies; 28+ messages in thread
From: Linus Torvalds @ 2003-11-24 22:32 UTC (permalink / raw)
To: Bradley Chapman; +Cc: linux-kernel
On Mon, 24 Nov 2003, Bradley Chapman wrote:
>
> What sort of information would you like me to provide, sir? The bug you're
> discussing here isn't affecting me; CONFIG_PREEMPT has been solid on 2.6.0-test10.
> This is on a Gateway 600S laptop with a P4-M 2Ghz processor and an i845 Brookdale
> chipset.
Basically, there's something strange going on, which _seems_ to be memory
corruption, and seems to correlate reasonable well (but not 100%) with
CONFIG_PREEMPT.
It's actually unlikely to be preemption itself that is broken: it's much
more likely that some driver or other subsystem is broken, and preempt is
just better at triggering it by making some race conditions much easier to
see due to bigger windows for them to happen.
The problem is finding enough of a pattern to the reports to make sense of
what seems to be the common thread. A lot of people use preemption without
any trouble.
Linus
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: What exactly are the issues with 2.6.0-test10 preempt?
2003-11-24 22:26 ` Bradley Chapman
2003-11-24 22:32 ` Linus Torvalds
@ 2003-11-24 22:41 ` Måns Rullgård
2003-11-24 22:51 ` Mike Fedyk
1 sibling, 1 reply; 28+ messages in thread
From: Måns Rullgård @ 2003-11-24 22:41 UTC (permalink / raw)
To: linux-kernel
Bradley Chapman <kakadu_croc@yahoo.com> writes:
> What sort of information would you like me to provide, sir? The bug
> you're discussing here isn't affecting me; CONFIG_PREEMPT has been
> solid on 2.6.0-test10. This is on a Gateway 600S laptop with a P4-M
> 2Ghz processor and an i845 Brookdale chipset.
I've been running 2.6.0-test10 for a few hours on my P4M Asus laptop.
Playing music, editing files, compiling some things, some web surfing,
no problems. Nothing unusual reported by the kernel.
--
Måns Rullgård
mru@kth.se
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: What exactly are the issues with 2.6.0-test10 preempt?
2003-11-24 22:32 ` Linus Torvalds
@ 2003-11-24 22:45 ` Bradley Chapman
2003-11-24 23:00 ` Linus Torvalds
2003-11-25 7:55 ` Jos Hulzink
1 sibling, 1 reply; 28+ messages in thread
From: Bradley Chapman @ 2003-11-24 22:45 UTC (permalink / raw)
To: Linus Torvalds; +Cc: linux-kernel
Mr. Torvalds,
--- Linus Torvalds <torvalds@osdl.org> wrote:
>
>
> On Mon, 24 Nov 2003, Bradley Chapman wrote:
> >
> > What sort of information would you like me to provide, sir? The bug you're
> > discussing here isn't affecting me; CONFIG_PREEMPT has been solid on
> 2.6.0-test10.
> > This is on a Gateway 600S laptop with a P4-M 2Ghz processor and an i845
> Brookdale
> > chipset.
>
> Basically, there's something strange going on, which _seems_ to be memory
> corruption, and seems to correlate reasonable well (but not 100%) with
> CONFIG_PREEMPT.
Ah, I see. I thought there was a definite issue with a certain subsystem that
just hadn't been fixed yet when CONFIG_PREEMPT=y.
>
> It's actually unlikely to be preemption itself that is broken: it's much
> more likely that some driver or other subsystem is broken, and preempt is
> just better at triggering it by making some race conditions much easier to
> see due to bigger windows for them to happen.
>
> The problem is finding enough of a pattern to the reports to make sense of
> what seems to be the common thread. A lot of people use preemption without
> any trouble.
Indeed. Do the same subsystems usually show the memory corruption issue with
preempt active, or does it just pop up all over the place, unpredictably?
>
> Linus
Brad
=====
__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: What exactly are the issues with 2.6.0-test10 preempt?
2003-11-24 22:41 ` Måns Rullgård
@ 2003-11-24 22:51 ` Mike Fedyk
2003-11-25 1:37 ` Måns Rullgård
2003-11-25 17:22 ` bill davidsen
0 siblings, 2 replies; 28+ messages in thread
From: Mike Fedyk @ 2003-11-24 22:51 UTC (permalink / raw)
To: M?ns Rullg?rd; +Cc: linux-kernel
On Mon, Nov 24, 2003 at 11:41:33PM +0100, M?ns Rullg?rd wrote:
> I've been running 2.6.0-test10 for a few hours on my P4M Asus laptop.
> Playing music, editing files, compiling some things, some web surfing,
> no problems. Nothing unusual reported by the kernel.
Now take your .config and compare it with someone who is getting problems
with preempt, and others, and narrow it down.
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: What exactly are the issues with 2.6.0-test10 preempt?
2003-11-24 21:59 ` Linus Torvalds
2003-11-24 22:26 ` Bradley Chapman
@ 2003-11-24 22:57 ` Guennadi Liakhovetski
2003-11-25 7:17 ` Guennadi Liakhovetski
2 siblings, 0 replies; 28+ messages in thread
From: Guennadi Liakhovetski @ 2003-11-24 22:57 UTC (permalink / raw)
To: Linus Torvalds; +Cc: Bradley Chapman, linux-kernel
On Mon, 24 Nov 2003, Linus Torvalds wrote:
> On Mon, 24 Nov 2003, Guennadi Liakhovetski wrote:
> >
> > Well, FWIW, I'm getting 100% reproducible Oopses on __boot__ by enabling
> > preemption AND (almost) all kernel-hacking CONFIG_DEBUG_* options - see my
> > post of 21.11.2003 with subject "[OOPS] 2.6.0-test7 + preempt + hacking".
> > If required, could try to narrow it down to 1 CONFIG option.
>
> I'd love to have more info - I actually looked at your original report,
> and it's one of those "impossible" things as far as I can tell. The low
> bit of the work "pending" flag should acts as a lock on workqueues, and
> serialize access to one workqueue totally - so having it show up with a
> pending timer is "strange" to say the least. The only two ways to clear
> the "pending" timer is by running the work-queue - either for the timer to
> have gone off (for the delayed case) _or_ the timer not to have evern been
> set in the first place (for the immediate case).
>
> So more information would be wonderful.
I've got that Oops while testing my fix of the tmscsim driver for 2.6. It
was test7. The driver worked, except in that only configuration, where
I've got the reported Oops. I just tried a working configuration (with
preempt enabled) and enabled DEBUG_PAGEALLOC - it still worked... So,
unless it REALLY was an impossible bug, that somehow impossibly
disappeared again (the only thing I can say - I couldn't have written that
Oops by hand just out of my head...:-)) - it should really be a
combination of all those parameters. I am currently recompiling test10
with that configuration, will try test7 again, if this one doesn't
reproduce the bug, will report results tomorrow. If I get the Oops again -
will attach the complete .config.
Thanks
Guennadi
---
Guennadi Liakhovetski
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: What exactly are the issues with 2.6.0-test10 preempt?
2003-11-24 22:45 ` Bradley Chapman
@ 2003-11-24 23:00 ` Linus Torvalds
2003-11-24 23:45 ` Linus Torvalds
0 siblings, 1 reply; 28+ messages in thread
From: Linus Torvalds @ 2003-11-24 23:00 UTC (permalink / raw)
To: Bradley Chapman; +Cc: linux-kernel
On Mon, 24 Nov 2003, Bradley Chapman wrote:
>
> Indeed. Do the same subsystems usually show the memory corruption issue with
> preempt active, or does it just pop up all over the place, unpredictably?
There are a few reports of "predictable" memory corruption, in the sense
that the same people tend to see the same kinds of oopses _without_ any
other signs of memory corruption (ie no random SIGSEGV's in user space
etc).
There's the magic slab corruption thing, there's a strange thread data
corruption (one person), and there's the sunrpc timer bug. All are
"impossible" bugs that would indicate a small amount of data corruption in
some core data structure.
They are hard to trigger, which makes me personally suspect some
user-after-free thing, where the bug happens only when somebody else
allocates (and uses) the entry immediately afterwards (so that the old
user overwrites stuff that just got initialized for the new user).
It's not likely to be a wild pointer: those tend to corrupt random memory,
and that in turn is a lot more likely to result in _user_ corruptions
(causing SIGSEGV's, corrupted files that magically become ok again when
re-read, etc), since 99% of all memory tends to be non-kernel data
structures.
The PAGEFREE debug option works well for page allocations, but the slab
cache is not very amenable to it. For slab debugging, it would be
wonderful if somebody made a _truly_ debugging slab allocator that didn't
use the slab cache at all, but used the page allocator (and screw the fact
that you use too much memory ;) instead.
(Sadly, some slab users actually use that stupid "initialize" crap. We
should rip it out: it's a disaster from a data cache standpoint too, since
it tends to do all the wrong things there, even though it's literally
meant to help).
Linus
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: What exactly are the issues with 2.6.0-test10 preempt?
2003-11-24 23:00 ` Linus Torvalds
@ 2003-11-24 23:45 ` Linus Torvalds
0 siblings, 0 replies; 28+ messages in thread
From: Linus Torvalds @ 2003-11-24 23:45 UTC (permalink / raw)
To: Bradley Chapman; +Cc: linux-kernel
On Mon, 24 Nov 2003, Linus Torvalds wrote:
>
> The PAGEFREE debug option works well for page allocations, but the slab
> cache is not very amenable to it. For slab debugging, it would be
> wonderful if somebody made a _truly_ debugging slab allocator that didn't
> use the slab cache at all, but used the page allocator (and screw the fact
> that you use too much memory ;) instead.
Ok, this is quite possibly the ugliest patch I've ever made, but it might
catch some of the "use-after-free" issues with slab.
IT WILL NOT WORK IN GENERAL! In particular, you'll need to have tons of
memory free for this patch to work, since it basically scrapes off all the
regular slab code, and replaces it with some really nasty crud. I was
lazy. Whatever. It means that the slab memory balancing won't work etc,
but maybe somebody else can integrate my quick hack better.
It boots for me, but I won't say anything beyond that (oh, do NOT enable
slab debugging if you want to test this out - I pretty much guarantee it
won't work with this hack. You should enable DEBUG_PAGEALLOC instead,
and see if you get anything interesting out of that..).
Linus
-----
--- 1.110/mm/slab.c Tue Oct 21 22:10:10 2003
+++ edited/mm/slab.c Mon Nov 24 15:34:23 2003
@@ -1906,6 +1906,21 @@
static inline void * __cache_alloc (kmem_cache_t *cachep, int flags)
{
+#if 1
+ void *ptr = (void*)__get_free_pages(flags, cachep->gfporder);
+ if (ptr) {
+ struct page *page = virt_to_page(ptr);
+ SET_PAGE_CACHE(page, cachep);
+ SET_PAGE_SLAB(page, 0x01020304);
+ if (cachep->ctor) {
+ unsigned long ctor_flags = SLAB_CTOR_CONSTRUCTOR;
+ if (!(flags & __GFP_WAIT))
+ ctor_flags |= SLAB_CTOR_ATOMIC;
+ cachep->ctor(ptr, cachep, ctor_flags);
+ }
+ }
+ return ptr;
+#else
unsigned long save_flags;
void* objp;
struct array_cache *ac;
@@ -1925,6 +1940,7 @@
local_irq_restore(save_flags);
objp = cache_alloc_debugcheck_after(cachep, flags, objp, __builtin_return_address(0));
return objp;
+#endif
}
/*
@@ -2043,10 +2059,20 @@
static inline void __cache_free (kmem_cache_t *cachep, void* objp)
{
struct array_cache *ac = ac_data(cachep);
+
check_irq_off();
objp = cache_free_debugcheck(cachep, objp, __builtin_return_address(0));
+#if 1
+ {
+ struct page *page = virt_to_page(objp);
+ int order = cachep->gfporder;
+ if (cachep->dtor)
+ cachep->dtor(objp, cachep, 0);
+ __free_pages(page, order);
+ }
+#else
if (likely(ac->avail < ac->limit)) {
STATS_INC_FREEHIT(cachep);
ac_entry(ac)[ac->avail++] = objp;
@@ -2056,6 +2082,7 @@
cache_flusharray(cachep, ac);
ac_entry(ac)[ac->avail++] = objp;
}
+#endif
}
/**
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: What exactly are the issues with 2.6.0-test10 preempt?
2003-11-24 22:51 ` Mike Fedyk
@ 2003-11-25 1:37 ` Måns Rullgård
2003-11-25 17:22 ` bill davidsen
1 sibling, 0 replies; 28+ messages in thread
From: Måns Rullgård @ 2003-11-25 1:37 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 457 bytes --]
Mike Fedyk <mfedyk@matchmail.com> writes:
> On Mon, Nov 24, 2003 at 11:41:33PM +0100, M?ns Rullg?rd wrote:
>> I've been running 2.6.0-test10 for a few hours on my P4M Asus laptop.
>> Playing music, editing files, compiling some things, some web surfing,
>> no problems. Nothing unusual reported by the kernel.
>
> Now take your .config and compare it with someone who is getting problems
> with preempt, and others, and narrow it down.
OK, here's mine.
[-- Attachment #2: .config --]
[-- Type: text/plain, Size: 28440 bytes --]
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_HPET_TIMER=y
# CONFIG_HPET_EMULATE_RTC is not set
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set
CONFIG_PM_DISK=y
CONFIG_PM_DISK_PARTITION="/dev/hda3"
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_ASUS=y
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_RELAXED_AML=y
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_PROC_INTF is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=m
# CONFIG_CPU_FREQ_24_API is not set
CONFIG_CPU_FREQ_TABLE=y
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
CONFIG_X86_P4_CLOCKMOD=m
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=m
CONFIG_YENTA=m
CONFIG_CARDBUS=y
# CONFIG_I82092 is not set
# CONFIG_I82365 is not set
# CONFIG_TCIC is not set
CONFIG_PCMCIA_PROBE=y
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_FW_LOADER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_TASKFILE_IO=y
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
CONFIG_BLK_DEV_SIS5513=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_REPORT_LUNS=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=y
CONFIG_DM_IOCTL_V4=y
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
#
# Device Drivers
#
#
# Texas Instruments PCILynx requires I2C bit-banging
#
CONFIG_IEEE1394_OHCI1394=m
#
# Protocol Drivers
#
# CONFIG_IEEE1394_VIDEO1394 is not set
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
CONFIG_IEEE1394_RAWIO=m
# CONFIG_IEEE1394_CMP is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_INET_ECN=y
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
# CONFIG_IP_NF_IRC is not set
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
# CONFIG_IP_NF_MATCH_LIMIT is not set
# CONFIG_IP_NF_MATCH_IPRANGE is not set
# CONFIG_IP_NF_MATCH_MAC is not set
# CONFIG_IP_NF_MATCH_PKTTYPE is not set
# CONFIG_IP_NF_MATCH_MARK is not set
# CONFIG_IP_NF_MATCH_MULTIPORT is not set
# CONFIG_IP_NF_MATCH_TOS is not set
# CONFIG_IP_NF_MATCH_RECENT is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_DSCP is not set
CONFIG_IP_NF_MATCH_AH_ESP=m
# CONFIG_IP_NF_MATCH_LENGTH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_MATCH_TCPMSS is not set
# CONFIG_IP_NF_MATCH_HELPER is not set
# CONFIG_IP_NF_MATCH_STATE is not set
# CONFIG_IP_NF_MATCH_CONNTRACK is not set
# CONFIG_IP_NF_MATCH_OWNER is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
# CONFIG_IP_NF_NAT is not set
# CONFIG_IP_NF_MANGLE is not set
CONFIG_IP_NF_TARGET_LOG=m
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_TARGET_TCPMSS is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
#
# IPv6: Netfilter Configuration
#
# CONFIG_IP6_NF_QUEUE is not set
# CONFIG_IP6_NF_IPTABLES is not set
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=m
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
CONFIG_SIS900=m
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_ARLAN is not set
# CONFIG_WAVELAN is not set
# CONFIG_PCMCIA_WAVELAN is not set
# CONFIG_PCMCIA_NETWAVE is not set
#
# Wireless 802.11 Frequency Hopping cards support
#
# CONFIG_PCMCIA_RAYCS is not set
#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_AIRO is not set
CONFIG_HERMES=m
# CONFIG_PLX_HERMES is not set
# CONFIG_TMD_HERMES is not set
# CONFIG_PCI_HERMES is not set
#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=m
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_ATMEL is not set
# CONFIG_PCMCIA_WL3501 is not set
CONFIG_NET_WIRELESS=y
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# PCMCIA network device support
#
# CONFIG_NET_PCMCIA is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
# CONFIG_I2C_ALGOBIT is not set
# CONFIG_I2C_ALGOPCF is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISA is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=m
# CONFIG_I2C_VIAPRO is not set
#
# I2C Hardware Sensors Chip support
#
CONFIG_I2C_SENSOR=m
# CONFIG_SENSORS_ADM1021 is not set
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
# CONFIG_IPMI_KCS is not set
# CONFIG_IPMI_WATCHDOG is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=m
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
CONFIG_AGP_SIS=m
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_DRM is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
# CONFIG_VIDEO_SELECT is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
CONFIG_FB_SIS=y
# CONFIG_FB_SIS_300 is not set
CONFIG_FB_SIS_315=y
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_PCI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
# CONFIG_LOGO is not set
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_RTCTIMER=m
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# ISA devices
#
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set
#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_VXP440 is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
# CONFIG_USB_DYNAMIC_MINORS is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_UHCI_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_XPAD is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GADGET is not set
#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_EXT2_FS_SECURITY is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=m
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
# CONFIG_EXPORTFS is not set
CONFIG_SUNRPC=m
# CONFIG_SUNRPC_GSS is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_IOVIRT is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_X86_EXTRA_IRQS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
#
# Security options
#
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_TEST is not set
#
# Library routines
#
CONFIG_CRC32=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y
[-- Attachment #3: Type: text/plain, Size: 31 bytes --]
--
Måns Rullgård
mru@kth.se
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: What exactly are the issues with 2.6.0-test10 preempt?
2003-11-24 21:59 ` Linus Torvalds
2003-11-24 22:26 ` Bradley Chapman
2003-11-24 22:57 ` Guennadi Liakhovetski
@ 2003-11-25 7:17 ` Guennadi Liakhovetski
2003-11-25 16:20 ` Linus Torvalds
2 siblings, 1 reply; 28+ messages in thread
From: Guennadi Liakhovetski @ 2003-11-25 7:17 UTC (permalink / raw)
To: Linus Torvalds; +Cc: Bradley Chapman, linux-kernel
On Mon, 24 Nov 2003, Linus Torvalds wrote:
> On Mon, 24 Nov 2003, Guennadi Liakhovetski wrote:
> >
> > Well, FWIW, I'm getting 100% reproducible Oopses on __boot__ by enabling
> > preemption AND (almost) all kernel-hacking CONFIG_DEBUG_* options - see my
> > post of 21.11.2003 with subject "[OOPS] 2.6.0-test7 + preempt + hacking".
> > If required, could try to narrow it down to 1 CONFIG option.
>
> I'd love to have more info - I actually looked at your original report,
> and it's one of those "impossible" things as far as I can tell. The low
> bit of the work "pending" flag should acts as a lock on workqueues, and
> serialize access to one workqueue totally - so having it show up with a
> pending timer is "strange" to say the least. The only two ways to clear
> the "pending" timer is by running the work-queue - either for the timer to
> have gone off (for the delayed case) _or_ the timer not to have evern been
> set in the first place (for the immediate case).
>
> So more information would be wonderful.
SORRY. Please, inore this report. It IS 100% reproducable - if you load
wrong (compiled without debugging) modules... Maybe you should only accept
bug-reports either without modules or with CONFIG_MODVERSIONS...
Really sorry for taking your time.
Regards
Guennadi
---
Guennadi Liakhovetski
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: What exactly are the issues with 2.6.0-test10 preempt?
2003-11-24 22:32 ` Linus Torvalds
2003-11-24 22:45 ` Bradley Chapman
@ 2003-11-25 7:55 ` Jos Hulzink
1 sibling, 0 replies; 28+ messages in thread
From: Jos Hulzink @ 2003-11-25 7:55 UTC (permalink / raw)
To: Linus Torvalds, Bradley Chapman; +Cc: linux-kernel
On Monday 24 Nov 2003 22:32, Linus Torvalds wrote:
> Basically, there's something strange going on, which _seems_ to be memory
> corruption, and seems to correlate reasonable well (but not 100%) with
> CONFIG_PREEMPT.
>
> It's actually unlikely to be preemption itself that is broken: it's much
> more likely that some driver or other subsystem is broken, and preempt is
> just better at triggering it by making some race conditions much easier to
> see due to bigger windows for them to happen.
>
> The problem is finding enough of a pattern to the reports to make sense of
> what seems to be the common thread. A lot of people use preemption without
> any trouble.
Maybe brute force is the best way to deal with this nasty one ? I'm thinking:
It must be rather easy to make a tool that takes a .config file and an
argument "This kernel seems in trouble Yes / No". If an option is enabled,
and this kernel config crashes, you increase the likelihood of that option
(i.e. you increment a counter). If an option is enabled, and this kernel
doesn't crash. you decrement a counter. In the end, you'll end with
statistics about which kernel option is likely to cause problems.
Jos
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: What exactly are the issues with 2.6.0-test10 preempt?
2003-11-25 7:17 ` Guennadi Liakhovetski
@ 2003-11-25 16:20 ` Linus Torvalds
0 siblings, 0 replies; 28+ messages in thread
From: Linus Torvalds @ 2003-11-25 16:20 UTC (permalink / raw)
To: Guennadi Liakhovetski; +Cc: Bradley Chapman, linux-kernel
On Tue, 25 Nov 2003, Guennadi Liakhovetski wrote:
>
> SORRY. Please, inore this report. It IS 100% reproducable - if you load
> wrong (compiled without debugging) modules...
Heh.
If only all bug-reports were of that kind ;)
Linus
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: What exactly are the issues with 2.6.0-test10 preempt?
2003-11-24 22:51 ` Mike Fedyk
2003-11-25 1:37 ` Måns Rullgård
@ 2003-11-25 17:22 ` bill davidsen
1 sibling, 0 replies; 28+ messages in thread
From: bill davidsen @ 2003-11-25 17:22 UTC (permalink / raw)
To: linux-kernel
In article <20031124225112.GA1343@mis-mike-wstn.matchmail.com>,
Mike Fedyk <mfedyk@matchmail.com> wrote:
| On Mon, Nov 24, 2003 at 11:41:33PM +0100, M?ns Rullg?rd wrote:
| > I've been running 2.6.0-test10 for a few hours on my P4M Asus laptop.
| > Playing music, editing files, compiling some things, some web surfing,
| > no problems. Nothing unusual reported by the kernel.
|
| Now take your .config and compare it with someone who is getting problems
| with preempt, and others, and narrow it down.
Just a caution, I suspect that this is related to something happening in
a small time window, and identical configs might not work the same on
different machines. Interrupt timing can be changed by disk layout,
rotational speed of the drive, interrupt priority, maybe even a user
event like keystroke or mouse action.
Comparing configs will help, but may not be consistent.
--
bill davidsen <davidsen@tmr.com>
CTO, TMR Associates, Inc
Doing interesting things with little computers since 1979.
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: What exactly are the issues with 2.6.0-test10 preempt?
2003-11-24 19:14 What exactly are the issues with 2.6.0-test10 preempt? Bradley Chapman
2003-11-24 21:08 ` Guennadi Liakhovetski
@ 2003-11-30 9:09 ` Matthias Urlichs
1 sibling, 0 replies; 28+ messages in thread
From: Matthias Urlichs @ 2003-11-30 9:09 UTC (permalink / raw)
To: linux-kernel
Hi, Bradley Chapman wrote:
> So what exactly is the problem?
I'm seeing
- User Interface corruption under X. That shows as random processes
crashing with SIGFPE (interestingly, often two unrelated X processes crash
at the same time -- sometimes one of them is the server) or SEGV,
I just switched to -test11 and turned off preemption. I don't see any more
crashes or weird behavior, but now performance sucks -- console scrolling
(frame buffer) stalls for seconds, keyboard repeat likewise, and the X
server suddenly decides it wants twice the CPU (60% instead of 30%).
I'll rebuild test11 with preempt and check whether there are any changes.
(Yes I know, changing two variables at the same time was somewhat stupid.)
--
Matthias Urlichs | {M:U} IT Design @ m-u-it.de | smurf@smurf.noris.de
Disclaimer: The quote was selected randomly. Really. | http://smurf.noris.de
- -
If you're careful enough, nothing bad or good will ever happen to you.
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: What exactly are the issues with 2.6.0-test10 preempt?
2003-11-25 18:31 kernel
@ 2003-11-26 9:30 ` Jens Axboe
0 siblings, 0 replies; 28+ messages in thread
From: Jens Axboe @ 2003-11-26 9:30 UTC (permalink / raw)
To: kernel; +Cc: linux-kernel
On Tue, Nov 25 2003, kernel wrote:
>
>
> Hi,
>
> I know it's binary only, but the NVidia driver produces the folowing
> which I thought might help in determining where this problem lies.
>
>
> If its useful I can supply more info.
>
>
> Regards, Mark.
>
>
> Debug: sleeping function called from invalid context at mm/slab.c:1856
> in_atomic():1, irqs_disabled():0
> Call Trace:
> [<c01202ac>] __might_sleep+0xac/0xe0
> [<c0145a18>] kmem_cache_alloc+0x78/0x80
Not really, it just shows the nvidia driver being buggy and using a
sleeping gfp allocation mask when it should not.
--
Jens Axboe
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: What exactly are the issues with 2.6.0-test10 preempt?
@ 2003-11-25 18:31 kernel
2003-11-26 9:30 ` Jens Axboe
0 siblings, 1 reply; 28+ messages in thread
From: kernel @ 2003-11-25 18:31 UTC (permalink / raw)
To: linux-kernel
Hi,
I know it's binary only, but the NVidia driver produces the folowing
which I thought might help in determining where this problem lies.
If its useful I can supply more info.
Regards, Mark.
Debug: sleeping function called from invalid context at mm/slab.c:1856
in_atomic():1, irqs_disabled():0
Call Trace:
[<c01202ac>] __might_sleep+0xac/0xe0
[<c0145a18>] kmem_cache_alloc+0x78/0x80
[<c0157035>] __get_vm_area+0x25/0x150
[<c0157193>] get_vm_area+0x33/0x40
[<c011bd2d>] __ioremap+0xbd/0x120
[<c011bdbc>] ioremap_nocache+0x2c/0xc0
[<f8b66edc>] os_map_kernel_space+0x4c/0x70 [nvidia]
[<f8a3b377>] __nvsym00568+0x1f/0x2c [nvidia]
[<f8a3d496>] __nvsym00775+0x6e/0xe0 [nvidia]
[<f8a3d526>] __nvsym00781+0x1e/0x190 [nvidia]
[<f8a3efac>] rm_init_adapter+0xc/0x10 [nvidia]
[<f8b63489>] nv_kern_open+0x119/0x270 [nvidia]
[<c016d519>] may_open+0x59/0x1d0
[<c01673f8>] chrdev_open+0xe8/0x250
[<c015e198>] get_empty_filp+0x68/0xe0
[<c015c440>] dentry_open+0x110/0x180
[<c015c328>] filp_open+0x68/0x70
[<c015c7eb>] sys_open+0x5b/0x90
[<c010b16b>] syscall_call+0x7/0xb
1: NVRM: AGPGART: unable to retrieve symbol table
Debug: sleeping function called from invalid context at mm/page_alloc.c:548
in_atomic():1, irqs_disabled():0
Call Trace:
[<c01202ac>] __might_sleep+0xac/0xe0
[<c0141e7c>] __alloc_pages+0x35c/0x370
[<c011afb2>] pte_alloc_one+0x22/0x70
[<c014b3a7>] pte_alloc_map+0x47/0x120
[<c014c965>] remap_page_range+0xf5/0x250
[<f8b66f8a>] os_map_io_space+0x5a/0x70 [nvidia]
[<f8a3b3fa>] __nvsym00625+0x1e/0x28 [nvidia]
[<f8a39731>] __nvsym00602+0x91/0xc4 [nvidia]
[<f8a398e2>] __nvsym00611+0x26/0x5c [nvidia]
[<f8a3f123>] rm_map_agp_pages+0x1b/0x24 [nvidia]
[<f8b639d2>] nv_kern_mmap+0x272/0x440 [nvidia]
[<c014f6e0>] do_mmap_pgoff+0x310/0x6b0
[<c011266e>] old_mmap+0x13e/0x190
[<c010b16b>] syscall_call+0x7/0xb
[<c0284627>] __scm_destroy+0x27/0x60
kernel is 2.6.0-pre10
kernel config ....
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
# CONFIG_STANDALONE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_KMOD is not set
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
CONFIG_MPENTIUMIII=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_PREEMPT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
# CONFIG_X86_MCE is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_EDD is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
CONFIG_HIGHPTE=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y
#
# Power management options (ACPI, APM)
#
# CONFIG_PM is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_RELAXED_AML=y
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
CONFIG_PCMCIA_PROBE=y
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_FW_LOADER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
CONFIG_PNP=y
CONFIG_PNP_DEBUG=y
#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_LBD is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_REPORT_LUNS is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
CONFIG_I2O=m
CONFIG_I2O_PCI=m
CONFIG_I2O_BLOCK=m
# CONFIG_I2O_SCSI is not set
CONFIG_I2O_PROC=m
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_IPV6 is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_ETHERTAP is not set
# CONFIG_NET_SB1000 is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=y
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_PS2_SYNAPTICS is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=128
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_ELV is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
CONFIG_I2C_ISA=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VELLEMAN is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
# CONFIG_I2C_VOODOO3 is not set
#
# I2C Hardware Sensors Chip support
#
CONFIG_I2C_SENSOR=m
# CONFIG_SENSORS_ADM1021 is not set
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_VIA686A=m
# CONFIG_SENSORS_W83781D is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=m
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
#
# Video For Linux
#
#
# Video Adapters
#
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_CPIA is not set
CONFIG_VIDEO_SAA5249=m
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_ZR36120 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BTCX=m
#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
# CONFIG_SND is not set
#
# Open Sound System
#
CONFIG_SOUND_PRIME=y
# CONFIG_SOUND_BT878 is not set
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_EMU10K1 is not set
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_CS4281 is not set
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_MAESTRO3 is not set
# CONFIG_SOUND_ICH is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
CONFIG_SOUND_VIA82CXXX=y
CONFIG_MIDI_VIA82CXXX=y
# CONFIG_SOUND_OSS is not set
# CONFIG_SOUND_TVMIXER is not set
# CONFIG_SOUND_ALI5455 is not set
# CONFIG_SOUND_FORTE is not set
# CONFIG_SOUND_RME96XX is not set
# CONFIG_SOUND_AD1980 is not set
#
# USB support
#
CONFIG_USB=y
CONFIG_USB_DEBUG=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Human Interface Devices (HID)
#
# CONFIG_USB_HID is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_XPAD is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_STV680 is not set
#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
CONFIG_USB_SERIAL_IPAQ=m
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GADGET is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_DEBUG=y
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_EXPORTFS is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_IOVIRT is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_FRAME_POINTER is not set
CONFIG_X86_EXTRA_IRQS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
#
# Security options
#
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_DES is not set
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_TEST=m
#
# Library routines
#
CONFIG_CRC32=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_PC=y
bash-2.05b$ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 6
cpu MHz : 1003.996
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 mmx fxsr sse
bogomips : 1978.36
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 6
cpu MHz : 1003.996
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 mmx fxsr sse
bogomips : 2002.94
bash-2.05b$ cat /proc/meminfo
MemTotal: 1294252 kB
MemFree: 588616 kB
Buffers: 22196 kB
Cached: 506232 kB
SwapCached: 0 kB
Active: 448168 kB
Inactive: 205512 kB
HighTotal: 393216 kB
HighFree: 768 kB
LowTotal: 901036 kB
LowFree: 587848 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 252 kB
Writeback: 0 kB
Mapped: 179776 kB
Slab: 35768 kB
Committed_AS: 166216 kB
PageTables: 1004 kB
VmallocTotal: 114680 kB
VmallocUsed: 19776 kB
VmallocChunk: 94412 kB
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: What exactly are the issues with 2.6.0-test10 preempt?
@ 2003-11-25 18:14 root
0 siblings, 0 replies; 28+ messages in thread
From: root @ 2003-11-25 18:14 UTC (permalink / raw)
To: linux-kernel
Hi,
I know it's binary only, but the NVidia driver produces the folowing
which I thought might help in determining where this problem lies.
Debug: sleeping function called from invalid context at mm/slab.c:1856
in_atomic():1, irqs_disabled():0
Call Trace:
[<c01202ac>] __might_sleep+0xac/0xe0
[<c0145a18>] kmem_cache_alloc+0x78/0x80
[<c0157035>] __get_vm_area+0x25/0x150
[<c0157193>] get_vm_area+0x33/0x40
[<c011bd2d>] __ioremap+0xbd/0x120
[<c011bdbc>] ioremap_nocache+0x2c/0xc0
[<f8b66edc>] os_map_kernel_space+0x4c/0x70 [nvidia]
[<f8a3b377>] __nvsym00568+0x1f/0x2c [nvidia]
[<f8a3d496>] __nvsym00775+0x6e/0xe0 [nvidia]
[<f8a3d526>] __nvsym00781+0x1e/0x190 [nvidia]
[<f8a3efac>] rm_init_adapter+0xc/0x10 [nvidia]
[<f8b63489>] nv_kern_open+0x119/0x270 [nvidia]
[<c016d519>] may_open+0x59/0x1d0
[<c01673f8>] chrdev_open+0xe8/0x250
[<c015e198>] get_empty_filp+0x68/0xe0
[<c015c440>] dentry_open+0x110/0x180
[<c015c328>] filp_open+0x68/0x70
[<c015c7eb>] sys_open+0x5b/0x90
[<c010b16b>] syscall_call+0x7/0xb
1: NVRM: AGPGART: unable to retrieve symbol table
Debug: sleeping function called from invalid context at mm/page_alloc.c:548
in_atomic():1, irqs_disabled():0
Call Trace:
[<c01202ac>] __might_sleep+0xac/0xe0
[<c0141e7c>] __alloc_pages+0x35c/0x370
[<c011afb2>] pte_alloc_one+0x22/0x70
[<c014b3a7>] pte_alloc_map+0x47/0x120
[<c014c965>] remap_page_range+0xf5/0x250
[<f8b66f8a>] os_map_io_space+0x5a/0x70 [nvidia]
[<f8a3b3fa>] __nvsym00625+0x1e/0x28 [nvidia]
[<f8a39731>] __nvsym00602+0x91/0xc4 [nvidia]
[<f8a398e2>] __nvsym00611+0x26/0x5c [nvidia]
[<f8a3f123>] rm_map_agp_pages+0x1b/0x24 [nvidia]
[<f8b639d2>] nv_kern_mmap+0x272/0x440 [nvidia]
[<c014f6e0>] do_mmap_pgoff+0x310/0x6b0
[<c011266e>] old_mmap+0x13e/0x190
[<c010b16b>] syscall_call+0x7/0xb
[<c0284627>] __scm_destroy+0x27/0x60
Regards, Mark.
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: What exactly are the issues with 2.6.0-test10 preempt?
@ 2003-11-25 18:13 kernel
0 siblings, 0 replies; 28+ messages in thread
From: kernel @ 2003-11-25 18:13 UTC (permalink / raw)
To: linux-kernel
Hi,
I know it's binary only, but the NVidia driver produces the following
which I thought might help in determining where this problem lies.
If it seems relevant I can supply more info ...
Debug: sleeping function called from invalid context at mm/slab.c:1856
in_atomic():1, irqs_disabled():0
Call Trace:
[<c01202ac>] __might_sleep+0xac/0xe0
[<c0145a18>] kmem_cache_alloc+0x78/0x80
[<c0157035>] __get_vm_area+0x25/0x150
[<c0157193>] get_vm_area+0x33/0x40
[<c011bd2d>] __ioremap+0xbd/0x120
[<c011bdbc>] ioremap_nocache+0x2c/0xc0
[<f8b66edc>] os_map_kernel_space+0x4c/0x70 [nvidia]
[<f8a3b377>] __nvsym00568+0x1f/0x2c [nvidia]
[<f8a3d496>] __nvsym00775+0x6e/0xe0 [nvidia]
[<f8a3d526>] __nvsym00781+0x1e/0x190 [nvidia]
[<f8a3efac>] rm_init_adapter+0xc/0x10 [nvidia]
[<f8b63489>] nv_kern_open+0x119/0x270 [nvidia]
[<c016d519>] may_open+0x59/0x1d0
[<c01673f8>] chrdev_open+0xe8/0x250
[<c015e198>] get_empty_filp+0x68/0xe0
[<c015c440>] dentry_open+0x110/0x180
[<c015c328>] filp_open+0x68/0x70
[<c015c7eb>] sys_open+0x5b/0x90
[<c010b16b>] syscall_call+0x7/0xb
1: NVRM: AGPGART: unable to retrieve symbol table
Debug: sleeping function called from invalid context at mm/page_alloc.c:548
in_atomic():1, irqs_disabled():0
Call Trace:
[<c01202ac>] __might_sleep+0xac/0xe0
[<c0141e7c>] __alloc_pages+0x35c/0x370
[<c011afb2>] pte_alloc_one+0x22/0x70
[<c014b3a7>] pte_alloc_map+0x47/0x120
[<c014c965>] remap_page_range+0xf5/0x250
[<f8b66f8a>] os_map_io_space+0x5a/0x70 [nvidia]
[<f8a3b3fa>] __nvsym00625+0x1e/0x28 [nvidia]
[<f8a39731>] __nvsym00602+0x91/0xc4 [nvidia]
[<f8a398e2>] __nvsym00611+0x26/0x5c [nvidia]
[<f8a3f123>] rm_map_agp_pages+0x1b/0x24 [nvidia]
[<f8b639d2>] nv_kern_mmap+0x272/0x440 [nvidia]
[<c014f6e0>] do_mmap_pgoff+0x310/0x6b0
[<c011266e>] old_mmap+0x13e/0x190
[<c010b16b>] syscall_call+0x7/0xb
[<c0284627>] __scm_destroy+0x27/0x60
Kernel config ....
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
# CONFIG_STANDALONE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_KMOD is not set
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
CONFIG_MPENTIUMIII=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_PREEMPT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
# CONFIG_X86_MCE is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_EDD is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
CONFIG_HIGHPTE=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y
#
# Power management options (ACPI, APM)
#
# CONFIG_PM is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_RELAXED_AML=y
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
CONFIG_PCMCIA_PROBE=y
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_FW_LOADER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
CONFIG_PNP=y
CONFIG_PNP_DEBUG=y
#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_LBD is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_REPORT_LUNS is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
CONFIG_I2O=m
CONFIG_I2O_PCI=m
CONFIG_I2O_BLOCK=m
# CONFIG_I2O_SCSI is not set
CONFIG_I2O_PROC=m
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_IPV6 is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_ETHERTAP is not set
# CONFIG_NET_SB1000 is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=y
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_PS2_SYNAPTICS is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=128
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_ELV is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
CONFIG_I2C_ISA=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VELLEMAN is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
# CONFIG_I2C_VOODOO3 is not set
#
# I2C Hardware Sensors Chip support
#
CONFIG_I2C_SENSOR=m
# CONFIG_SENSORS_ADM1021 is not set
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_VIA686A=m
# CONFIG_SENSORS_W83781D is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=m
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
#
# Video For Linux
#
#
# Video Adapters
#
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_CPIA is not set
CONFIG_VIDEO_SAA5249=m
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_ZR36120 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BTCX=m
#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
# CONFIG_SND is not set
#
# Open Sound System
#
CONFIG_SOUND_PRIME=y
# CONFIG_SOUND_BT878 is not set
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_EMU10K1 is not set
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_CS4281 is not set
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_MAESTRO3 is not set
# CONFIG_SOUND_ICH is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
CONFIG_SOUND_VIA82CXXX=y
CONFIG_MIDI_VIA82CXXX=y
# CONFIG_SOUND_OSS is not set
# CONFIG_SOUND_TVMIXER is not set
# CONFIG_SOUND_ALI5455 is not set
# CONFIG_SOUND_FORTE is not set
# CONFIG_SOUND_RME96XX is not set
# CONFIG_SOUND_AD1980 is not set
#
# USB support
#
CONFIG_USB=y
CONFIG_USB_DEBUG=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Human Interface Devices (HID)
#
# CONFIG_USB_HID is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_XPAD is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_STV680 is not set
#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
CONFIG_USB_SERIAL_IPAQ=m
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GADGET is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_DEBUG=y
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_EXPORTFS is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_IOVIRT is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_FRAME_POINTER is not set
CONFIG_X86_EXTRA_IRQS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
#
# Security options
#
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_DES is not set
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_TEST=m
#
# Library routines
#
CONFIG_CRC32=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_PC=y
CPU Info
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 6
cpu MHz : 1003.996
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 mmx fxsr sse
bogomips : 1978.36
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 6
cpu MHz : 1003.996
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 mmx fxsr sse
bogomips : 2002.94
Regards, Mark.
kernel@xenon-computing.com
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: What exactly are the issues with 2.6.0-test10 preempt?
2003-11-25 0:05 ` Andi Kleen
@ 2003-11-25 0:16 ` Chris Mason
0 siblings, 0 replies; 28+ messages in thread
From: Chris Mason @ 2003-11-25 0:16 UTC (permalink / raw)
To: Andi Kleen; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1192 bytes --]
On Mon, 2003-11-24 at 19:05, Andi Kleen wrote:
> > > Me and Chris used that to track down some nasty corruptions on x86-64,
> > > it is especially useful together with LTP which calls a lot of system
> > > calls that could cause corruption.
> >
> > Do you have your code posted anywhere, and when are you going to merge it
> > with LTP? ;)
>
> I wrote it always custom tailored to the problem (it is not very difficult, but
> you often have to tune it a bit until it has the right frequency to find the
> corruption) Don't have one here right now, sorry. Chris had a aimed to be
> generic patch for 2.4 that may still be around. I don't think it would fit
> into current LTP because it is an kernel module (LTP doesn't have a kernel build
> infrastructure right now). But it would be an useful addition longer term to it
> I agree, once they support kernel modules.
Here's my 2.4 patch, which was actually against the suse kernel so you
might get fuzz/rejects for Config.in and the drivers/char/Makefile
It's fairly simple, just put the slab sizes you want into the sizes
array in crasher.c
2.6 port won't be hard, if people are interested, I'll do it after
Thanksgiving.
-chris
[-- Attachment #2: crasher-2.diff --]
[-- Type: text/x-patch, Size: 4302 bytes --]
diff -ur linux.suse.1/drivers/char/Config.in linux.suse/drivers/char/Config.in
--- linux.suse.1/drivers/char/Config.in 2003-10-08 09:17:39.000000000 -0400
+++ linux.suse/drivers/char/Config.in 2003-10-07 11:04:56.000000000 -0400
@@ -357,4 +357,6 @@
tristate 'ACP Modem (Mwave) support' CONFIG_MWAVE
fi
+tristate 'Crashing module' CONFIG_CRASHER
+
endmenu
diff -ur linux.suse.1/drivers/char/Makefile linux.suse/drivers/char/Makefile
--- linux.suse.1/drivers/char/Makefile 2003-10-08 09:17:39.000000000 -0400
+++ linux.suse/drivers/char/Makefile 2003-10-07 11:04:56.000000000 -0400
@@ -294,6 +294,7 @@
obj-$(CONFIG_MIXCOMWD) += mixcomwd.o
obj-$(CONFIG_DEADMAN) += deadman.o
obj-$(CONFIG_HANGCHECK_TIMER) += hangcheck-timer.o
+obj-$(CONFIG_CRASHER) += crasher.o
obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o
obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o
obj-$(CONFIG_SC520_WDT) += sc520_wdt.o
diff -ur linux.suse.1/drivers/char/crasher.c linux.suse/drivers/char/crasher.c
--- linux.suse.1/drivers/char/crasher.c 2003-10-08 09:18:20.000000000 -0400
+++ linux.suse/drivers/char/crasher.c 2003-10-07 11:40:07.000000000 -0400
@@ -0,0 +1,145 @@
+/*
+ * crasher.c, it breaks things
+ */
+
+
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+
+static int module_exiting;
+static struct completion startup = COMPLETION_INITIALIZER(startup);
+
+MODULE_PARM_DESC(seed, "random seed for memory tests");
+MODULE_LICENSE("GPL");
+
+static unsigned long rand_seed = 152L;
+
+#define NUM_ALLOC 24
+#define NUM_SIZES 3
+static int sizes[] = { 128, 256, 4096 };
+
+struct mem_buf {
+ char *buf;
+ int size;
+};
+
+static unsigned long crasher_random(void)
+{
+ rand_seed = rand_seed*69069L+1;
+ return rand_seed^jiffies;
+}
+
+void crasher_srandom(unsigned long entropy)
+{
+ rand_seed ^= entropy;
+ crasher_random();
+}
+
+static char *mem_alloc(int size) {
+ char *p = kmalloc(size, GFP_KERNEL);
+ int i;
+ if (!p)
+ return p;
+ for (i = 0 ; i < size; i++)
+ p[i] = (i % 119) + 8;
+ return p;
+}
+
+static void mem_check(char *p, int size) {
+ int i;
+ if (!p)
+ return;
+ for (i = 0 ; i < size; i++) {
+ if (p[i] != ((i % 119) + 8)) {
+ printk(KERN_CRIT "verify error at %lX offset %d "
+ " wanted %d found %d size %d\n",
+ (unsigned long)(p + i), i, (i % 119) + 8,
+ p[i], size);
+ }
+ }
+}
+
+static void mem_verify(void) {
+ struct mem_buf bufs[NUM_ALLOC];
+ struct mem_buf *b;
+ int index;
+ int size;
+ unsigned long sleep;
+ crasher_srandom(rand_seed);
+
+ printk("crasher module memory testing, sizes: ");
+ for (index = 0 ; index < NUM_SIZES ; index++)
+ printk("%d ", sizes[index]);
+ printk("\n");
+
+ memset(bufs, 0, sizeof(struct mem_buf) * NUM_ALLOC);
+ while(!module_exiting) {
+ index = crasher_random() % NUM_ALLOC;
+ b = bufs + index;
+ if (b->size) {
+ mem_check(b->buf, b->size);
+ kfree(b->buf);
+ b->buf = NULL;
+ b->size = 0;
+ } else {
+ size = crasher_random() % NUM_SIZES;
+ size = sizes[size];
+ b->buf = mem_alloc(size);
+ b->size = size;
+ }
+ sleep = crasher_random() % (HZ / 10);
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(sleep);
+ set_current_state(TASK_RUNNING);
+ }
+ for (index = 0 ; index < NUM_ALLOC ; index++) {
+ b = bufs + index;
+ if (b->size) {
+ mem_check(b->buf, b->size);
+ kfree(b->buf);
+ }
+ }
+ printk("crasher done\n");
+}
+
+static int crasher_thread(void *unused) {
+
+ struct task_struct *tsk = current;
+
+ daemonize();
+ strcpy(tsk->comm, "crasher");
+
+ /* avoid getting signals */
+ spin_lock_irq(&tsk->sigmask_lock);
+ flush_signals(tsk);
+ sigfillset(&tsk->blocked);
+ recalc_sigpending(tsk);
+ spin_unlock_irq(&tsk->sigmask_lock);
+
+ complete(&startup);
+ mem_verify();
+ complete(&startup);
+ return 0;
+}
+static int __init crasher_init(void)
+{
+ kernel_thread(crasher_thread, crasher_thread, CLONE_FS | CLONE_FILES |
+ CLONE_SIGNAL) ;
+
+ wait_for_completion(&startup);
+ return 0;
+}
+
+static void __exit crasher_exit(void)
+{
+ module_exiting = 1;
+ wait_for_completion(&startup);
+ return;
+}
+
+module_init(crasher_init);
+module_exit(crasher_exit);
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: What exactly are the issues with 2.6.0-test10 preempt?
2003-11-25 0:00 ` Mike Fedyk
@ 2003-11-25 0:05 ` Andi Kleen
2003-11-25 0:16 ` Chris Mason
0 siblings, 1 reply; 28+ messages in thread
From: Andi Kleen @ 2003-11-25 0:05 UTC (permalink / raw)
To: linux-kernel, mason
> > Me and Chris used that to track down some nasty corruptions on x86-64,
> > it is especially useful together with LTP which calls a lot of system
> > calls that could cause corruption.
>
> Do you have your code posted anywhere, and when are you going to merge it
> with LTP? ;)
I wrote it always custom tailored to the problem (it is not very difficult, but
you often have to tune it a bit until it has the right frequency to find the
corruption) Don't have one here right now, sorry. Chris had a aimed to be
generic patch for 2.4 that may still be around. I don't think it would fit
into current LTP because it is an kernel module (LTP doesn't have a kernel build
infrastructure right now). But it would be an useful addition longer term to it
I agree, once they support kernel modules.
-Andi
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: What exactly are the issues with 2.6.0-test10 preempt?
2003-11-24 23:50 ` Andi Kleen
@ 2003-11-25 0:00 ` Mike Fedyk
2003-11-25 0:05 ` Andi Kleen
0 siblings, 1 reply; 28+ messages in thread
From: Mike Fedyk @ 2003-11-25 0:00 UTC (permalink / raw)
To: Andi Kleen; +Cc: Linus Torvalds, linux-kernel, mason
On Tue, Nov 25, 2003 at 12:50:17AM +0100, Andi Kleen wrote:
> Linus Torvalds <torvalds@osdl.org> writes:
> >
> > The PAGEFREE debug option works well for page allocations, but the slab
> > cache is not very amenable to it. For slab debugging, it would be
> > wonderful if somebody made a _truly_ debugging slab allocator that didn't
> > use the slab cache at all, but used the page allocator (and screw the fact
> > that you use too much memory ;) instead.
>
> One way to find slab corruptions qickly is to write a thrasher:
> identify for which slab size the corruptions happens and then write a
> small module that runs a thread that just allocates from that slab,
> writes a pattern to it, sleeps a bit, and checks the pattern (allocate
> multiple slabs to make it more effective). Repeat.
>
> If you don't know the size cycle through the different cache sizes.
>
> Me and Chris used that to track down some nasty corruptions on x86-64,
> it is especially useful together with LTP which calls a lot of system
> calls that could cause corruption.
Do you have your code posted anywhere, and when are you going to merge it
with LTP? ;)
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: What exactly are the issues with 2.6.0-test10 preempt?
[not found] ` <Pine.LNX.4.58.0311241452550.15101@home.osdl.org.suse.lists.linux.kernel>
@ 2003-11-24 23:50 ` Andi Kleen
2003-11-25 0:00 ` Mike Fedyk
0 siblings, 1 reply; 28+ messages in thread
From: Andi Kleen @ 2003-11-24 23:50 UTC (permalink / raw)
To: Linus Torvalds; +Cc: linux-kernel, mason
Linus Torvalds <torvalds@osdl.org> writes:
>
> The PAGEFREE debug option works well for page allocations, but the slab
> cache is not very amenable to it. For slab debugging, it would be
> wonderful if somebody made a _truly_ debugging slab allocator that didn't
> use the slab cache at all, but used the page allocator (and screw the fact
> that you use too much memory ;) instead.
One way to find slab corruptions qickly is to write a thrasher:
identify for which slab size the corruptions happens and then write a
small module that runs a thread that just allocates from that slab,
writes a pattern to it, sleeps a bit, and checks the pattern (allocate
multiple slabs to make it more effective). Repeat.
If you don't know the size cycle through the different cache sizes.
Me and Chris used that to track down some nasty corruptions on x86-64,
it is especially useful together with LTP which calls a lot of system
calls that could cause corruption.
-Andi
^ permalink raw reply [flat|nested] 28+ messages in thread
end of thread, other threads:[~2003-11-30 9:09 UTC | newest]
Thread overview: 28+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-11-24 19:14 What exactly are the issues with 2.6.0-test10 preempt? Bradley Chapman
2003-11-24 21:08 ` Guennadi Liakhovetski
2003-11-24 21:29 ` Bradley Chapman
2003-11-24 21:47 ` Guennadi Liakhovetski
2003-11-24 21:55 ` Bradley Chapman
2003-11-24 21:59 ` Linus Torvalds
2003-11-24 22:26 ` Bradley Chapman
2003-11-24 22:32 ` Linus Torvalds
2003-11-24 22:45 ` Bradley Chapman
2003-11-24 23:00 ` Linus Torvalds
2003-11-24 23:45 ` Linus Torvalds
2003-11-25 7:55 ` Jos Hulzink
2003-11-24 22:41 ` Måns Rullgård
2003-11-24 22:51 ` Mike Fedyk
2003-11-25 1:37 ` Måns Rullgård
2003-11-25 17:22 ` bill davidsen
2003-11-24 22:57 ` Guennadi Liakhovetski
2003-11-25 7:17 ` Guennadi Liakhovetski
2003-11-25 16:20 ` Linus Torvalds
2003-11-30 9:09 ` Matthias Urlichs
[not found] <20031124224514.56242.qmail@web40908.mail.yahoo.com.suse.lists.linux.kernel>
[not found] ` <Pine.LNX.4.58.0311241452550.15101@home.osdl.org.suse.lists.linux.kernel>
2003-11-24 23:50 ` Andi Kleen
2003-11-25 0:00 ` Mike Fedyk
2003-11-25 0:05 ` Andi Kleen
2003-11-25 0:16 ` Chris Mason
2003-11-25 18:13 kernel
2003-11-25 18:14 root
2003-11-25 18:31 kernel
2003-11-26 9:30 ` Jens Axboe
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).