From: Roman Zippel <zippel@linux-m68k.org>
To: Andrew Morton <akpm@osdl.org>, linux-kernel@vger.kernel.org
Cc: acpi-devel@lists.sourceforge.net
Subject: [PATCH 1/8] Kconfig: cleanup ACPI menu
Date: Sat, 29 Jan 2005 23:18:54 +0100 (CET) [thread overview]
Message-ID: <Pine.LNX.4.61.0501292318310.7614@scrub.home> (raw)
This properly indents the ACPI menu.
Hide ACPI_BLACKLIST_YEAR when not needed.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
---
Kconfig | 36 +++++++++++++-----------------------
1 files changed, 13 insertions(+), 23 deletions(-)
Index: linux-2.6.11/drivers/acpi/Kconfig
===================================================================
--- linux-2.6.11.orig/drivers/acpi/Kconfig 2005-01-29 22:50:43.609910902 +0100
+++ linux-2.6.11/drivers/acpi/Kconfig 2005-01-29 22:55:05.068877064 +0100
@@ -40,21 +40,23 @@ config ACPI
available at:
<http://www.acpi.info>
+if ACPI
+
config ACPI_BOOT
bool
- depends on ACPI || X86_HT
+ depends on X86_HT
default y
config ACPI_INTERPRETER
bool
- depends on ACPI
depends on !IA64_SGI_SN
default y
+if ACPI_INTERPRETER
+
config ACPI_SLEEP
bool "Sleep States (EXPERIMENTAL)"
- depends on X86 && ACPI
- depends on ACPI_INTERPRETER
+ depends on X86
depends on EXPERIMENTAL && PM
default y
---help---
@@ -81,7 +83,6 @@ config ACPI_SLEEP_PROC_FS
config ACPI_AC
tristate "AC Adapter"
depends on X86
- depends on ACPI_INTERPRETER
default m
help
This driver adds support for the AC Adapter object, which indicates
@@ -91,7 +92,6 @@ config ACPI_AC
config ACPI_BATTERY
tristate "Battery"
depends on X86
- depends on ACPI_INTERPRETER
default m
help
This driver adds support for battery information through
@@ -100,7 +100,6 @@ config ACPI_BATTERY
config ACPI_BUTTON
tristate "Button"
- depends on ACPI_INTERPRETER
depends on !IA64_SGI_SN
default m
help
@@ -112,7 +111,6 @@ config ACPI_BUTTON
config ACPI_VIDEO
tristate "Video"
- depends on ACPI_INTERPRETER
depends on EXPERIMENTAL
depends on !IA64_SGI_SN
default m
@@ -127,7 +125,6 @@ config ACPI_VIDEO
config ACPI_FAN
tristate "Fan"
- depends on ACPI_INTERPRETER
depends on !IA64_SGI_SN
default m
help
@@ -136,7 +133,6 @@ config ACPI_FAN
config ACPI_PROCESSOR
tristate "Processor"
- depends on ACPI_INTERPRETER
depends on !IA64_SGI_SN
default m
help
@@ -165,7 +161,6 @@ config ACPI_THERMAL
config ACPI_NUMA
bool "NUMA support"
- depends on ACPI_INTERPRETER
depends on NUMA
depends on (IA64 || X86_64)
default y if IA64_GENERIC || IA64_SGI_SN2
@@ -173,7 +168,6 @@ config ACPI_NUMA
config ACPI_ASUS
tristate "ASUS/Medion Laptop Extras"
depends on X86
- depends on ACPI_INTERPRETER
default m
---help---
This driver provides support for extra features of ACPI-compatible
@@ -203,7 +197,6 @@ config ACPI_ASUS
config ACPI_IBM
tristate "IBM ThinkPad Laptop Extras"
depends on X86
- depends on ACPI_INTERPRETER
default m
---help---
This is a Linux ACPI driver for the IBM ThinkPad laptops. It adds
@@ -217,7 +210,6 @@ config ACPI_IBM
config ACPI_TOSHIBA
tristate "Toshiba Laptop Extras"
depends on X86
- depends on ACPI_INTERPRETER
default m
---help---
This driver adds support for access to certain system settings
@@ -244,7 +236,7 @@ config ACPI_TOSHIBA
config ACPI_CUSTOM_DSDT
bool "Include Custom DSDT"
- depends on ACPI_INTERPRETER && !STANDALONE
+ depends on !STANDALONE
default n
help
Thist option is to load a custom ACPI DSDT
@@ -270,7 +262,6 @@ config ACPI_BLACKLIST_YEAR
config ACPI_DEBUG
bool "Debug Statements"
- depends on ACPI_INTERPRETER
depends on !IA64_SGI_SN
default n
help
@@ -280,14 +271,12 @@ config ACPI_DEBUG
config ACPI_BUS
bool
- depends on ACPI_INTERPRETER
depends on !IA64_SGI_SN
default y
config ACPI_EC
bool
depends on X86
- depends on ACPI_INTERPRETER
default y
help
This driver is required on some systems for the proper operation of
@@ -296,28 +285,27 @@ config ACPI_EC
config ACPI_POWER
bool
- depends on ACPI_INTERPRETER
depends on !IA64_SGI_SN
default y
config ACPI_PCI
bool
- depends on ACPI_INTERPRETER
depends on !IA64_SGI_SN
default PCI
config ACPI_SYSTEM
bool
- depends on ACPI_INTERPRETER
depends on !IA64_SGI_SN
default y
help
This driver will enable your system to shut down using ACPI, and
dump your ACPI DSDT table using /proc/acpi/dsdt.
+endif # ACPI_INTERPRETER
+
config X86_PM_TIMER
bool "Power Management Timer Support"
- depends on X86 && ACPI
+ depends on X86
depends on ACPI_BOOT && EXPERIMENTAL
depends on !X86_64
default n
@@ -336,10 +324,12 @@ config X86_PM_TIMER
config ACPI_CONTAINER
tristate "ACPI0004,PNP0A05 and PNP0A06 Container Driver (EXPERIMENTAL)"
- depends on ACPI && EXPERIMENTAL
+ depends on EXPERIMENTAL
default (ACPI_HOTPLUG_MEMORY || ACPI_HOTPLUG_CPU || ACPI_HOTPLUG_IO)
---help---
This is the ACPI generic container driver which supports
ACPI0004, PNP0A05 and PNP0A06 devices
+endif # ACPI
+
endmenu
reply other threads:[~2005-01-29 22:19 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.61.0501292318310.7614@scrub.home \
--to=zippel@linux-m68k.org \
--cc=acpi-devel@lists.sourceforge.net \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).