RE: [PATCH 2/3] phy: add generic function to support ksetting support

[Fugang Duan <fugang.duan@nxp.com>]

From: Philippe Reynes <tremyfr@gmail.com> Sent: Friday, April 15, 2016 6:35 AM
> To: davem@davemloft.net; decot@googlers.com; f.fainelli@gmail.com; Fugang
> Duan <fugang.duan@nxp.com>
> Cc: linux-kernel@vger.kernel.org; netdev@vger.kernel.org; Philippe Reynes
> <tremyfr@gmail.com>
> Subject: [PATCH 2/3] phy: add generic function to support ksetting support
> 
> The old ethtool api (get_setting and set_setting) has generic phy functions
> phy_ethtool_sset and phy_ethtool_gset.
> To supprt the new ethtool api (get_link_ksettings and set_link_ksettings), we
> add generic phy function phy_ethtool_ksettings_get and
> phy_ethtool_ksettings_set.
> 
> Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
> ---
>  drivers/net/phy/phy.c |   81
> +++++++++++++++++++++++++++++++++++++++++++++++++
>  include/linux/phy.h   |    4 ++
>  2 files changed, 85 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index
> 5590b9c..6f221c8 100644
> --- a/drivers/net/phy/phy.c
> +++ b/drivers/net/phy/phy.c
> @@ -362,6 +362,60 @@ int phy_ethtool_sset(struct phy_device *phydev,
> struct ethtool_cmd *cmd)  }  EXPORT_SYMBOL(phy_ethtool_sset);
> 
> +int phy_ethtool_ksettings_set(struct phy_device *phydev,
> +			      const struct ethtool_link_ksettings *cmd) {
> +	u8 autoneg = cmd->base.autoneg;
> +	u8 duplex = cmd->base.duplex;
> +	u32 speed = cmd->base.speed;
> +	u32 advertising;
> +
> +	if (cmd->base.phy_address != phydev->mdio.addr)
> +		return -EINVAL;
> +
> +	ethtool_convert_link_mode_to_legacy_u32(&advertising,
> +						cmd->link_modes.advertising);
> +
> +	/* We make sure that we don't pass unsupported values in to the PHY */
> +	advertising &= phydev->supported;
> +
> +	/* Verify the settings we care about. */
> +	if (autoneg != AUTONEG_ENABLE && autoneg != AUTONEG_DISABLE)
> +		return -EINVAL;
> +
> +	if (autoneg == AUTONEG_ENABLE && advertising == 0)
> +		return -EINVAL;
> +
> +	if (autoneg == AUTONEG_DISABLE &&
> +	    ((speed != SPEED_1000 &&
> +	      speed != SPEED_100 &&
> +	      speed != SPEED_10) ||
> +	     (duplex != DUPLEX_HALF &&
> +	      duplex != DUPLEX_FULL)))
> +		return -EINVAL;
> +
> +	phydev->autoneg = autoneg;
> +
> +	phydev->speed = speed;
> +
> +	phydev->advertising = advertising;
> +
> +	if (autoneg == AUTONEG_ENABLE)
> +		phydev->advertising |= ADVERTISED_Autoneg;
> +	else
> +		phydev->advertising &= ~ADVERTISED_Autoneg;
> +
> +	phydev->duplex = duplex;
> +
> +	phydev->mdix = cmd->base.eth_tp_mdix_ctrl;
> +
> +	/* Restart the PHY */
> +	phy_start_aneg(phydev);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(phy_ethtool_ksettings_set);
> +
>  int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd)  {
>  	cmd->supported = phydev->supported;
> @@ -385,6 +439,33 @@ int phy_ethtool_gset(struct phy_device *phydev,
> struct ethtool_cmd *cmd)  }  EXPORT_SYMBOL(phy_ethtool_gset);
> 
> +int phy_ethtool_ksettings_get(struct phy_device *phydev,
> +			      struct ethtool_link_ksettings *cmd) {
> +	ethtool_convert_legacy_u32_to_link_mode(cmd-
> >link_modes.supported,
> +						phydev->supported);
> +
> +	ethtool_convert_legacy_u32_to_link_mode(cmd-
> >link_modes.advertising,
> +						phydev->advertising);
> +
> +	ethtool_convert_legacy_u32_to_link_mode(cmd-
> >link_modes.lp_advertising,
> +						phydev->lp_advertising);
> +
> +	cmd->base.speed = phydev->speed;
> +	cmd->base.duplex = phydev->duplex;
> +	if (phydev->interface == PHY_INTERFACE_MODE_MOCA)
> +		cmd->base.port = PORT_BNC;
> +	else
> +		cmd->base.port = PORT_MII;
> +
> +	cmd->base.phy_address = phydev->mdio.addr;
> +	cmd->base.autoneg = phydev->autoneg;
> +	cmd->base.eth_tp_mdix_ctrl = phydev->mdix;
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(phy_ethtool_ksettings_get);
> +
>  /**
>   * phy_mii_ioctl - generic PHY MII ioctl interface
>   * @phydev: the phy_device struct
> diff --git a/include/linux/phy.h b/include/linux/phy.h index 2abd791..be3f83b
> 100644
> --- a/include/linux/phy.h
> +++ b/include/linux/phy.h
> @@ -805,6 +805,10 @@ void phy_start_machine(struct phy_device *phydev);
> void phy_stop_machine(struct phy_device *phydev);  int
> phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);  int
> phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
> +int phy_ethtool_ksettings_get(struct phy_device *phydev,
> +			      struct ethtool_link_ksettings *cmd); int
> +phy_ethtool_ksettings_set(struct phy_device *phydev,
> +			      const struct ethtool_link_ksettings *cmd);
>  int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd);  int
> phy_start_interrupts(struct phy_device *phydev);  void phy_print_status(struct
> phy_device *phydev);
> --
> 1.7.4.4

It seems fine. There have many drivers need to update .set_settings/. get_settings, not only fsl fec driver.
And whether there still need to keep the old interface in phy.c driver ?

Regards,
Andy