From: Ioana Ciornei <ioana.ciornei@nxp.com>
To: "Calvin Johnson (OSS)" <calvin.johnson@oss.nxp.com>,
Jeremy Linton <jeremy.linton@arm.com>,
Russell King - ARM Linux admin <linux@armlinux.org.uk>,
Jon <jon@solid-run.com>,
Cristi Sovaiala <cristian.sovaiala@nxp.com>,
Andrew Lunn <andrew@lunn.ch>,
Andy Shevchenko <andy.shevchenko@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
"Madalin Bucur (OSS)" <madalin.bucur@oss.nxp.com>
Cc: "netdev@vger.kernel.org" <netdev@vger.kernel.org>,
"linux-acpi@vger.kernel.org" <linux-acpi@vger.kernel.org>,
"linux.cj@gmail.com" <linux.cj@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Ioana Ciocoi Radulescu <ruxandra.radulescu@nxp.com>,
Jakub Kicinski <kuba@kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: RE: [net-next PATCH v2 3/3] net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver
Date: Thu, 2 Jul 2020 08:48:38 +0000 [thread overview]
Message-ID: <VI1PR0402MB387145B3181911668E024264E06D0@VI1PR0402MB3871.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <20200701061233.31120-4-calvin.johnson@oss.nxp.com>
> Subject: [net-next PATCH v2 3/3] net: dpaa2-mac: Add ACPI support for DPAA2
> MAC driver
>
> Modify dpaa2_mac_connect() to support ACPI along with DT.
> Modify dpaa2_mac_get_node() to get the dpmac fwnode from either DT or
> ACPI.
> Replace of_get_phy_mode with fwnode_get_phy_mode to get phy-mode for a
> dpmac_node.
> Define and use helper function find_phy_device() to find phy_dev that is later
> connected to mac->phylink.
>
> Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
>
> ---
>
> Changes in v2:
> - clean up dpaa2_mac_get_node()
> - introduce find_phy_device()
> - use acpi_find_child_device()
>
> .../net/ethernet/freescale/dpaa2/dpaa2-mac.c | 79 ++++++++++++-------
> 1 file changed, 50 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
> b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
> index 3ee236c5fc37..78e8160c9b52 100644
> --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
> +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
> @@ -3,6 +3,8 @@
>
> #include "dpaa2-eth.h"
> #include "dpaa2-mac.h"
> +#include <linux/acpi.h>
> +#include <linux/platform_device.h>
>
> #define phylink_to_dpaa2_mac(config) \
> container_of((config), struct dpaa2_mac, phylink_config) @@ -23,38
> +25,46 @@ static int phy_mode(enum dpmac_eth_if eth_if, phy_interface_t
> *if_mode) }
>
> /* Caller must call of_node_put on the returned value */ -static struct
> device_node *dpaa2_mac_get_node(u16 dpmac_id)
> +static struct fwnode_handle *dpaa2_mac_get_node(struct device *dev,
> + u16 dpmac_id)
> {
> - struct device_node *dpmacs, *dpmac = NULL;
> - u32 id;
> + struct fwnode_handle *fsl_mc_fwnode = dev->parent->parent-
> >fwnode;
> + struct fwnode_handle *dpmacs, *dpmac = NULL;
> + struct device *fsl_mc = dev->parent->parent;
> + struct acpi_device *adev;
> int err;
> + u32 id;
>
> - dpmacs = of_find_node_by_name(NULL, "dpmacs");
> - if (!dpmacs)
> - return NULL;
> -
> - while ((dpmac = of_get_next_child(dpmacs, dpmac)) != NULL) {
> - err = of_property_read_u32(dpmac, "reg", &id);
> - if (err)
> - continue;
> - if (id == dpmac_id)
> - break;
> + if (is_of_node(fsl_mc_fwnode)) {
> + dpmacs = device_get_named_child_node(fsl_mc, "dpmacs");
> + if (!dpmacs)
> + return NULL;
> +
> + while ((dpmac = fwnode_get_next_child_node(dpmacs,
> dpmac))) {
> + err = fwnode_property_read_u32(dpmac, "reg", &id);
> + if (err)
> + continue;
> + if (id == dpmac_id)
> + return dpmac;
> + }
> + } else if (is_acpi_node(fsl_mc_fwnode)) {
> + adev = acpi_find_child_device(ACPI_COMPANION(dev->parent),
> + dpmac_id, false);
> + if (adev)
> + return (&adev->fwnode);
> }
> -
> - of_node_put(dpmacs);
> -
This of_node_put() on the 'dpmacs' node still needs to happen for the OF case.
Ioana
> - return dpmac;
> + return NULL;
> }
>
> -static int dpaa2_mac_get_if_mode(struct device_node *node,
> +static int dpaa2_mac_get_if_mode(struct fwnode_handle *dpmac_node,
> struct dpmac_attr attr)
> {
> phy_interface_t if_mode;
> int err;
>
> - err = of_get_phy_mode(node, &if_mode);
> - if (!err)
> - return if_mode;
> + err = fwnode_get_phy_mode(dpmac_node);
> + if (err > 0)
> + return err;
>
> err = phy_mode(attr.eth_if, &if_mode);
> if (!err)
> @@ -231,7 +241,8 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac) {
> struct fsl_mc_device *dpmac_dev = mac->mc_dev;
> struct net_device *net_dev = mac->net_dev;
> - struct device_node *dpmac_node;
> + struct fwnode_handle *dpmac_node = NULL;
> + struct phy_device *phy_dev;
> struct phylink *phylink;
> struct dpmac_attr attr;
> int err;
> @@ -251,7 +262,7 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
>
> mac->if_link_type = attr.link_type;
>
> - dpmac_node = dpaa2_mac_get_node(attr.id);
> + dpmac_node = dpaa2_mac_get_node(&dpmac_dev->dev, attr.id);
> if (!dpmac_node) {
> netdev_err(net_dev, "No dpmac@%d node found.\n", attr.id);
> err = -ENODEV;
> @@ -269,7 +280,7 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
> * error out if the interface mode requests them and there is no PHY
> * to act upon them
> */
> - if (of_phy_is_fixed_link(dpmac_node) &&
> + if (of_phy_is_fixed_link(to_of_node(dpmac_node)) &&
> (mac->if_mode == PHY_INTERFACE_MODE_RGMII_ID ||
> mac->if_mode == PHY_INTERFACE_MODE_RGMII_RXID ||
> mac->if_mode == PHY_INTERFACE_MODE_RGMII_TXID)) { @@ -
> 282,7 +293,7 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
> mac->phylink_config.type = PHYLINK_NETDEV;
>
> phylink = phylink_create(&mac->phylink_config,
> - of_fwnode_handle(dpmac_node), mac-
> >if_mode,
> + dpmac_node, mac->if_mode,
> &dpaa2_mac_phylink_ops);
> if (IS_ERR(phylink)) {
> err = PTR_ERR(phylink);
> @@ -290,20 +301,30 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
> }
> mac->phylink = phylink;
>
> - err = phylink_of_phy_connect(mac->phylink, dpmac_node, 0);
> + if (is_of_node(dpmac_node))
> + err = phylink_of_phy_connect(mac->phylink,
> + to_of_node(dpmac_node), 0);
> + else if (is_acpi_node(dpmac_node)) {
> + phy_dev = find_phy_device(dpmac_node);
> + if (IS_ERR(phy_dev))
> + goto err_phylink_destroy;
> + err = phylink_connect_phy(mac->phylink, phy_dev);
> + }
> if (err) {
> - netdev_err(net_dev, "phylink_of_phy_connect() = %d\n", err);
> + netdev_err(net_dev, "phylink_fwnode_phy_connect() = %d\n",
> err);
> goto err_phylink_destroy;
> }
>
> - of_node_put(dpmac_node);
> + if (is_of_node(dpmac_node))
> + of_node_put(to_of_node(dpmac_node));
>
> return 0;
>
> err_phylink_destroy:
> phylink_destroy(mac->phylink);
> err_put_node:
> - of_node_put(dpmac_node);
> + if (is_of_node(dpmac_node))
> + of_node_put(to_of_node(dpmac_node));
> err_close_dpmac:
> dpmac_close(mac->mc_io, 0, dpmac_dev->mc_handle);
> return err;
> --
> 2.17.1
next prev parent reply other threads:[~2020-07-02 8:48 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-01 6:12 [net-next PATCH v2 0/3] ACPI support for dpaa2 MAC driver Calvin Johnson
2020-07-01 6:12 ` [net-next PATCH v2 1/3] net: phy: introduce find_phy_device() Calvin Johnson
2020-07-01 10:23 ` Andy Shevchenko
2020-07-01 13:24 ` Andrew Lunn
2020-07-01 6:12 ` [net-next PATCH v2 2/3] Documentation: ACPI: DSD: Document MDIO PHY Calvin Johnson
2020-07-01 10:27 ` Andy Shevchenko
2020-07-03 11:35 ` Calvin Johnson
2020-07-04 11:40 ` Andy Shevchenko
2020-07-01 13:16 ` Randy Dunlap
2020-07-01 13:30 ` Andrew Lunn
2020-07-01 6:12 ` [net-next PATCH v2 3/3] net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver Calvin Johnson
2020-07-01 10:37 ` Andy Shevchenko
2020-07-02 8:48 ` Ioana Ciornei [this message]
2020-07-02 9:34 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=VI1PR0402MB387145B3181911668E024264E06D0@VI1PR0402MB3871.eurprd04.prod.outlook.com \
--to=ioana.ciornei@nxp.com \
--cc=andrew@lunn.ch \
--cc=andy.shevchenko@gmail.com \
--cc=calvin.johnson@oss.nxp.com \
--cc=cristian.sovaiala@nxp.com \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=jeremy.linton@arm.com \
--cc=jon@solid-run.com \
--cc=kuba@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux.cj@gmail.com \
--cc=linux@armlinux.org.uk \
--cc=madalin.bucur@oss.nxp.com \
--cc=netdev@vger.kernel.org \
--cc=ruxandra.radulescu@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).