From: Andy Tang <andy.tang@nxp.com>
To: Andy Tang <andy.tang@nxp.com>,
"shawnguo@kernel.org" <shawnguo@kernel.org>
Cc: Leo Li <leoyang.li@nxp.com>,
"robh+dt@kernel.org" <robh+dt@kernel.org>,
"mark.rutland@arm.com" <mark.rutland@arm.com>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: RE: [PATCH v3] arm64: dts: ls1028a: Add temperature sensor node
Date: Tue, 6 Aug 2019 05:41:21 +0000 [thread overview]
Message-ID: <VI1PR04MB43336E0A72DA69E6BA07EE77F3D50@VI1PR04MB4333.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <20190806053004.36956-1-andy.tang@nxp.com>
Please ignore this email. Sorry for sending the wrong patch.
BR,
Andy
> -----Original Message-----
> From: Yuantian Tang <andy.tang@nxp.com>
> Sent: 2019年8月6日 13:30
> To: shawnguo@kernel.org
> Cc: Leo Li <leoyang.li@nxp.com>; robh+dt@kernel.org;
> mark.rutland@arm.com; linux-arm-kernel@lists.infradead.org;
> devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; Andy Tang
> <andy.tang@nxp.com>
> Subject: [PATCH v3] arm64: dts: ls1028a: Add temperature sensor node
>
> Add nxp sa56004 chip node for temperature monitor.
>
> Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
> ---
> v3:
> - sort the node in i2c address
> v2:
> - change the node name and add vcc-supply
> arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 15
> +++++++++++++++
> arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 15
> +++++++++++++++
> 2 files changed, 30 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> index b359068..960daf2 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> @@ -47,6 +47,15 @@
> regulator-always-on;
> };
>
> + sb_3v3: regulator-sb3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "3v3_vbus";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> sound {
> compatible = "simple-audio-card";
> simple-audio-card,format = "i2s";
> @@ -117,6 +126,12 @@
> #size-cells = <0>;
> reg = <0x3>;
>
> + temperature-sensor@4c {
> + compatible = "nxp,sa56004";
> + reg = <0x4c>;
> + vcc-supply = <&sb_3v3>;
> + };
> +
> rtc@51 {
> compatible = "nxp,pcf2129";
> reg = <0x51>;
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> index f9c272f..6a22423 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> @@ -43,6 +43,15 @@
> regulator-always-on;
> };
>
> + sb_3v3: regulator-sb3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "3v3_vbus";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> sound {
> compatible = "simple-audio-card";
> simple-audio-card,format = "i2s";
> @@ -115,6 +124,12 @@
> #size-cells = <0>;
> reg = <0x3>;
>
> + temperature-sensor@4c {
> + compatible = "nxp,sa56004";
> + reg = <0x4c>;
> + vcc-supply = <&sb_3v3>;
> + };
> +
> rtc@51 {
> compatible = "nxp,pcf2129";
> reg = <0x51>;
> --
> 1.7.1
next prev parent reply other threads:[~2019-08-06 5:41 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-06 5:30 [PATCH v3] arm64: dts: ls1028a: Add temperature sensor node Yuantian Tang
2019-08-06 5:41 ` Andy Tang [this message]
-- strict thread matches above, loose matches on Subject: below --
2019-06-11 5:42 Yuantian Tang
2019-06-13 2:51 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=VI1PR04MB43336E0A72DA69E6BA07EE77F3D50@VI1PR04MB4333.eurprd04.prod.outlook.com \
--to=andy.tang@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).