linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vabhav Sharma <vabhav.sharma@nxp.com>
To: Shawn Guo <shawnguo@kernel.org>
Cc: "sudeep.holla@arm.com" <sudeep.holla@arm.com>,
	"oss@buserror.net" <oss@buserror.net>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"robh+dt@kernel.org" <robh+dt@kernel.org>,
	"mark.rutland@arm.com" <mark.rutland@arm.com>,
	"linuxppc-dev@lists.ozlabs.org" <linuxppc-dev@lists.ozlabs.org>,
	"linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>,
	"mturquette@baylibre.com" <mturquette@baylibre.com>,
	"sboyd@kernel.org" <sboyd@kernel.org>,
	"rjw@rjwysocki.net" <rjw@rjwysocki.net>,
	"viresh.kumar@linaro.org" <viresh.kumar@linaro.org>,
	"linux-clk@vger.kernel.org" <linux-clk@vger.kernel.org>,
	"linux-pm@vger.kernel.org" <linux-pm@vger.kernel.org>,
	"linux-kernel-owner@vger.kernel.org" 
	<linux-kernel-owner@vger.kernel.org>,
	"catalin.marinas@arm.com" <catalin.marinas@arm.com>,
	"will.deacon@arm.com" <will.deacon@arm.com>,
	"gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org>,
	"arnd@arndb.de" <arnd@arndb.de>,
	"kstewart@linuxfoundation.org" <kstewart@linuxfoundation.org>,
	"yamada.masahiro@socionext.com" <yamada.masahiro@socionext.com>,
	Leo Li <leoyang.li@nxp.com>,
	"linux@armlinux.org.uk" <linux@armlinux.org.uk>,
	Varun Sethi <V.Sethi@nxp.com>, Udit Kumar <udit.kumar@nxp.com>,
	Pankaj Bansal <pankaj.bansal@nxp.com>,
	Priyanka Jain <priyanka.jain@nxp.com>,
	Sriram Dash <sriram.dash@nxp.com>
Subject: RE: [PATCH v4 6/6] arm64: dts: add LX2160ARDB board support
Date: Mon, 15 Oct 2018 02:44:00 +0000	[thread overview]
Message-ID: <VI1PR04MB4800555506B64C9E93F9ED36F3FD0@VI1PR04MB4800.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <20181008055159.GH3587@dragon>



> -----Original Message-----
> From: linux-kernel-owner@vger.kernel.org <linux-kernel-
> owner@vger.kernel.org> On Behalf Of Shawn Guo
> Sent: Monday, October 8, 2018 11:22 AM
> To: Vabhav Sharma <vabhav.sharma@nxp.com>
> Cc: sudeep.holla@arm.com; oss@buserror.net; linux-kernel@vger.kernel.org;
> devicetree@vger.kernel.org; robh+dt@kernel.org; mark.rutland@arm.com;
> linuxppc-dev@lists.ozlabs.org; linux-arm-kernel@lists.infradead.org;
> mturquette@baylibre.com; sboyd@kernel.org; rjw@rjwysocki.net;
> viresh.kumar@linaro.org; linux-clk@vger.kernel.org; linux-pm@vger.kernel.org;
> linux-kernel-owner@vger.kernel.org; catalin.marinas@arm.com;
> will.deacon@arm.com; gregkh@linuxfoundation.org; arnd@arndb.de;
> kstewart@linuxfoundation.org; yamada.masahiro@socionext.com; Leo Li
> <leoyang.li@nxp.com>; linux@armlinux.org.uk; Varun Sethi <V.Sethi@nxp.com>;
> Udit Kumar <udit.kumar@nxp.com>; Pankaj Bansal <pankaj.bansal@nxp.com>;
> Priyanka Jain <priyanka.jain@nxp.com>; Sriram Dash <sriram.dash@nxp.com>
> Subject: Re: [PATCH v4 6/6] arm64: dts: add LX2160ARDB board support
> 
> On Thu, Oct 04, 2018 at 06:33:51AM +0530, Vabhav Sharma wrote:
> > LX2160A reference design board (RDB) is a high-performance computing,
> > evaluation, and development platform with LX2160A SoC.
> >
> > Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
> > Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
> > Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
> > ---
> >  arch/arm64/boot/dts/freescale/Makefile            |   1 +
> >  arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 100
> > ++++++++++++++++++++++
> >  2 files changed, 101 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> >
> > diff --git a/arch/arm64/boot/dts/freescale/Makefile
> > b/arch/arm64/boot/dts/freescale/Makefile
> > index 86e18ad..445b72b 100644
> > --- a/arch/arm64/boot/dts/freescale/Makefile
> > +++ b/arch/arm64/boot/dts/freescale/Makefile
> > @@ -13,3 +13,4 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-
> rdb.dtb
> >  dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
> >  dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
> >  dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
> > +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> > b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> > new file mode 100644
> > index 0000000..1483071
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> > @@ -0,0 +1,100 @@
> > +// SPDX-License-Identifier: (GPL-2.0 OR MIT) // // Device Tree file
> > +for LX2160ARDB // // Copyright 2018 NXP
> > +
> > +/dts-v1/;
> > +
> > +#include "fsl-lx2160a.dtsi"
> > +
> > +/ {
> > +	model = "NXP Layerscape LX2160ARDB";
> > +	compatible = "fsl,lx2160a-rdb", "fsl,lx2160a";
> > +
> > +	chosen {
> > +		stdout-path = "serial0:115200n8";
> > +	};
> > +
> > +	sb_3v3: regulator-fixed {
> 
> The node name should probably be named like regulator-sb3v3 or something, so
> that the pattern can be followed when we have another fixed regulator to be
> added.
Ok, Agree this is fixed 3.3 standby voltage for i2c subchannels
Updating to regulator-sb3v3 
> 
> > +		compatible = "regulator-fixed";
> > +		regulator-name = "fixed-3.3V";
> 
> The name should be something we can find on board schematics.
Sure, I will update SMPS name which provide fixed 3.3 stand-by voltage
> 
> > +		regulator-min-microvolt = <3300000>;
> > +		regulator-max-microvolt = <3300000>;
> > +		regulator-boot-on;
> > +		regulator-always-on;
> > +	};
> > +
> > +};
> > +
> > +&uart0 {
> > +	status = "okay";
> > +};
> > +
> > +&uart1 {
> > +	status = "okay";
> > +};
> > +
> > +&i2c0 {
> 
> Please keep these labeled nodes sorted alphabetically.
Ok
> 
> > +	status = "okay";
> 
> Have a newline between properties and child node.
Sure.
> 
> > +	i2c-mux@77 {
> > +		compatible = "nxp,pca9547";
> > +		reg = <0x77>;
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +
> > +		i2c@2 {
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +			reg = <0x2>;
> > +
> > +			power-monitor@40 {
> > +				compatible = "ti,ina220";
> > +				reg = <0x40>;
> > +				shunt-resistor = <1000>;
> > +			};
> > +		};
> > +
> > +		i2c@3 {
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +			reg = <0x3>;
> > +
> > +			temperature-sensor@4c {
> > +				compatible = "nxp,sa56004";
> > +				reg = <0x4c>;
> > +				vcc-supply = <&sb_3v3>;
> > +			};
> > +
> > +			temperature-sensor@4d {
> > +				compatible = "nxp,sa56004";
> > +				reg = <0x4d>;
> > +				vcc-supply = <&sb_3v3>;
> > +			};
> > +		};
> > +	};
> > +};
> > +
> > +&i2c4 {
> > +	status = "okay";
> > +
> > +	rtc@51 {
> > +		compatible = "nxp,pcf2129";
> > +		reg = <0x51>;
> > +		// IRQ10_B
> > +		interrupts = <0 150 0x4>;
> > +		};
> 
> Bad indentation.
My mistake, Updated
> 
> Shawn
> 
> > +
> > +};
> > +
> > +&usb0 {
> > +	status = "okay";
> > +};
> > +
> > +&usb1 {
> > +	status = "okay";
> > +};
> > +
> > +&crypto {
> > +	status = "okay";
> > +};
> > --
> > 2.7.4
> >

      reply	other threads:[~2018-10-15  2:44 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-04  1:03 [PATCH v4 0/6] arm64: dts: NXP: add basic dts file for LX2160A SoC Vabhav Sharma
2018-10-04  1:03 ` [PATCH v4 1/6] dt-bindings: arm64: add compatible for LX2160A Vabhav Sharma
2018-10-04  1:03 ` [PATCH v4 2/6] soc/fsl/guts: Add compatible string " Vabhav Sharma
2018-10-04  1:03 ` [PATCH v4 3/6] clk: qoriq: increase array size of cmux_to_group Vabhav Sharma
2018-10-04  1:03 ` [PATCH v4 4/6] clk: qoriq: Add clockgen support for lx2160a Vabhav Sharma
2018-10-04  1:03 ` [PATCH v4 5/6] arm64: dts: add QorIQ LX2160A SoC support Vabhav Sharma
2018-10-08  5:45   ` Shawn Guo
2018-10-15  2:58     ` Vabhav Sharma
2018-10-15 16:48       ` Stephen Boyd
2018-10-25  4:19         ` Vabhav Sharma
2018-10-04  1:03 ` [PATCH v4 6/6] arm64: dts: add LX2160ARDB board support Vabhav Sharma
2018-10-08  5:52   ` Shawn Guo
2018-10-15  2:44     ` Vabhav Sharma [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=VI1PR04MB4800555506B64C9E93F9ED36F3FD0@VI1PR04MB4800.eurprd04.prod.outlook.com \
    --to=vabhav.sharma@nxp.com \
    --cc=V.Sethi@nxp.com \
    --cc=arnd@arndb.de \
    --cc=catalin.marinas@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=kstewart@linuxfoundation.org \
    --cc=leoyang.li@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel-owner@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=oss@buserror.net \
    --cc=pankaj.bansal@nxp.com \
    --cc=priyanka.jain@nxp.com \
    --cc=rjw@rjwysocki.net \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=sriram.dash@nxp.com \
    --cc=sudeep.holla@arm.com \
    --cc=udit.kumar@nxp.com \
    --cc=viresh.kumar@linaro.org \
    --cc=will.deacon@arm.com \
    --cc=yamada.masahiro@socionext.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).