From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.1 required=3.0 tests=DKIM_SIGNED,DKIM_VALID, DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI, SIGNED_OFF_BY,SPF_PASS,URIBL_BLOCKED autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 36DF2C04EB9 for ; Wed, 5 Dec 2018 07:01:46 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id C46842082B for ; Wed, 5 Dec 2018 07:01:45 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=nxp.com header.i=@nxp.com header.b="L+S+OQmS" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org C46842082B Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=nxp.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727124AbeLEHBo (ORCPT ); Wed, 5 Dec 2018 02:01:44 -0500 Received: from mail-eopbgr30053.outbound.protection.outlook.com ([40.107.3.53]:13566 "EHLO EUR03-AM5-obe.outbound.protection.outlook.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1726092AbeLEHBn (ORCPT ); Wed, 5 Dec 2018 02:01:43 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=nxp.com; s=selector1; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=wx5JXUCkCHH/9Bi/W2JTJPPCkj8DZZL2/IjFVZYFImU=; b=L+S+OQmS2eX8ZDpe53J3w7oR637VVd2s3zCL2TPna1KytIxzdca5ZmY6/XXNjBbxyOiN+zzzTOSHk9/hO46s6Wlr0OZFLIRBViPsHDSTNfQWLiNktEy9AvSuW8oSHq9gKKUSJeivtoBT+0sHkjarxwtC5pw8xvxDIYtzzRD5DxY= Received: from VI1PR04MB5726.eurprd04.prod.outlook.com (20.178.127.24) by VI1PR04MB4272.eurprd04.prod.outlook.com (52.134.31.151) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.1382.22; Wed, 5 Dec 2018 07:01:33 +0000 Received: from VI1PR04MB5726.eurprd04.prod.outlook.com ([fe80::595a:9890:8397:5d51]) by VI1PR04MB5726.eurprd04.prod.outlook.com ([fe80::595a:9890:8397:5d51%4]) with mapi id 15.20.1404.019; Wed, 5 Dec 2018 07:01:33 +0000 From: Yogesh Narayan Gaur To: Schrempf Frieder , "linux-mtd@lists.infradead.org" , "boris.brezillon@bootlin.com" , "linux-spi@vger.kernel.org" , Marek Vasut , Mark Brown , Han Xu CC: "dwmw2@infradead.org" , "computersforpeace@gmail.com" , "richard@nod.at" , "miquel.raynal@bootlin.com" , David Wolfe , Fabio Estevam , Prabhakar Kushwaha , "shawnguo@kernel.org" , "linux-kernel@vger.kernel.org" Subject: RE: [PATCH v7 3/9] spi: Add a driver for the Freescale/NXP QuadSPI controller Thread-Topic: [PATCH v7 3/9] spi: Add a driver for the Freescale/NXP QuadSPI controller Thread-Index: AQHUi9vWAE0Oo4W6mEqTtVIHp+5UgqVvmyJA Date: Wed, 5 Dec 2018 07:01:33 +0000 Message-ID: References: <1543932685-15011-1-git-send-email-frieder.schrempf@kontron.de> <1543932685-15011-4-git-send-email-frieder.schrempf@kontron.de> In-Reply-To: <1543932685-15011-4-git-send-email-frieder.schrempf@kontron.de> Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: authentication-results: spf=none (sender IP is ) smtp.mailfrom=yogeshnarayan.gaur@nxp.com; x-originating-ip: [14.142.187.166] x-ms-publictraffictype: Email x-microsoft-exchange-diagnostics: 1;VI1PR04MB4272;6:ekE4jOcq0i1niv7nUSE5GYY8/QryU1dBPCdCk5byTJEg2+sX4uUuq+shZCeUJ47hdJ9QtZ6qUbi8QetNxo9130Bpr+ymzY6qF8rY4lN/ZqnWp+gXuSUzTGHTpQxdvbD4pJ8AkZQnmnMHmA5i6SfhmiKTVl5WPKFJ+PGGl8C4oNbeLj2uB82y7qPzaz5J4Njd4/RMrBiLCeOMt6l++ruxHeWuzWxAdTox0jtkoLOJYdl2R9GsqPhiT5O4LtBTFqnKMtnjwC9lSyvvIDFWZYxCotBIMXiW/7TojSXaK5wGKIzi1Bcp5taEM89FupkYarAKEj8oBgdWal+nNUKcB/TxeVOIpktFSlR9dMty0fWtzPuyMEza/ar9KnYoW+AsZpkDORsgDWlM1+KRISbCkcJM6jWimCB0MZS84gLLcGli3UiJ50sJxqr7D2xsQSU8udd0Ubz54z2N5D9XJHNRad3VEQ==;5:0tdz6KAg+01LAYZOcVqCW7zXKKx5t+YRigWpSl/quE0HuLC8lCcr7lF4pj845scnhGl550VnnMpgl4bMSsLsVFffXmG233ruaGI7woWJKDhAokCaQbtpRd6PY7qGT9jo2P1JgvxckQX/BWRA5VT7iPd505zihZ10R+lhpOapJTg=;7:sDUTgTwYhWL7uz9Z/hbvsq7XkyvYEGzxFYX03/tIJiaGRAAaWzsJXpqrUAbgUDdJBWB1AbtQrS/cs2ucdoB6LxMCWzCubPkTqF2f+SxommgI0D36K8+T4qhu7apbYD9cBWfLQBHwdNW0oQpmuSHqkA== x-ms-exchange-antispam-srfa-diagnostics: SOS; x-ms-office365-filtering-correlation-id: 9d104f58-77eb-4a84-3376-08d65a7f7ddf x-ms-office365-filtering-ht: Tenant x-microsoft-antispam: BCL:0;PCL:0;RULEID:(2390098)(7020095)(4652040)(8989299)(4534185)(7168020)(4627221)(201703031133081)(201702281549075)(8990200)(5600074)(711020)(4618075)(2017052603328)(7153060)(7193020);SRVR:VI1PR04MB4272; x-ms-traffictypediagnostic: VI1PR04MB4272: x-microsoft-antispam-prvs: x-ms-exchange-senderadcheck: 1 x-exchange-antispam-report-cfa-test: BCL:0;PCL:0;RULEID:(8211001083)(6040522)(2401047)(8121501046)(5005006)(10201501046)(3231455)(999002)(944501520)(52105112)(93006095)(93001095)(3002001)(6055026)(148016)(149066)(150057)(6041310)(20161123558120)(20161123560045)(201703131423095)(201702281528075)(20161123555045)(201703061421075)(201703061406153)(20161123562045)(20161123564045)(201708071742011)(7699051)(76991095);SRVR:VI1PR04MB4272;BCL:0;PCL:0;RULEID:;SRVR:VI1PR04MB4272; x-forefront-prvs: 08770259B4 x-forefront-antispam-report: SFV:NSPM;SFS:(10009020)(346002)(376002)(396003)(39860400002)(136003)(366004)(13464003)(189003)(199004)(316002)(76176011)(33656002)(7696005)(105586002)(2201001)(575784001)(86362001)(106356001)(26005)(186003)(110136005)(8936002)(81166006)(68736007)(446003)(53546011)(6506007)(55236004)(102836004)(99286004)(54906003)(476003)(11346002)(6116002)(3846002)(14444005)(256004)(2906002)(66066001)(14454004)(6636002)(2501003)(486006)(97736004)(81156014)(4326008)(5660300001)(8676002)(25786009)(53936002)(4744004)(71200400001)(71190400001)(55016002)(39060400002)(78486014)(9686003)(6436002)(6246003)(7736002)(305945005)(229853002)(74316002)(7416002)(478600001)(53946003)(569006);DIR:OUT;SFP:1101;SCL:1;SRVR:VI1PR04MB4272;H:VI1PR04MB5726.eurprd04.prod.outlook.com;FPR:;SPF:None;LANG:en;PTR:InfoNoRecords;MX:1;A:1; received-spf: None (protection.outlook.com: nxp.com does not designate permitted sender hosts) x-microsoft-antispam-message-info: fA+bjderC35WUlNbYX2zNBxCo8eplqlHZI7K92TJdUVlT+XTJOL89kM64hj1jcEygoInGc4svmfn/YFidHmH6jFcSDpFzEJh0/Wr80obYK9xVxHpEN+dZIQ3gS9yVuePjqtmdMMJlIHBVQxEa5i9w9wDvD7kENkQdI6pPyA6jkLdT5hAqLAWeBM1lXOag8W4lhkYsy8A5Dgz4TVmuUNE3psqBf4ghNUqTAkw2J5Sz3TtOvLkGhxj3mV2Z/fpoMlknBezCbF5kMcqGRJF7tjaZkoFUxhCqtBdWW5+p3dw9MhohJUca6b98YI5KECLSSp/VCg8+YyD43qu1wHSoK6uB0yHuFlQYT+3reHkeOcYNEo= spamdiagnosticoutput: 1:99 spamdiagnosticmetadata: NSPM Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable MIME-Version: 1.0 X-OriginatorOrg: nxp.com X-MS-Exchange-CrossTenant-Network-Message-Id: 9d104f58-77eb-4a84-3376-08d65a7f7ddf X-MS-Exchange-CrossTenant-originalarrivaltime: 05 Dec 2018 07:01:33.7089 (UTC) X-MS-Exchange-CrossTenant-fromentityheader: Hosted X-MS-Exchange-CrossTenant-id: 686ea1d3-bc2b-4c6f-a92c-d99c5c301635 X-MS-Exchange-Transport-CrossTenantHeadersStamped: VI1PR04MB4272 Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi, Verified patch on LS1088ardb this board is having two connected flash slave= devices on CS0 and CS1. Verified with simple Read/Write/Erase operations along with JFFS2 mounting = and booting from flash MTD partition for both slave devices. > -----Original Message----- > From: Schrempf Frieder [mailto:frieder.schrempf@kontron.de] > Sent: Tuesday, December 4, 2018 7:45 PM > To: linux-mtd@lists.infradead.org; boris.brezillon@bootlin.com; linux- > spi@vger.kernel.org; Marek Vasut ; Mark Brown > ; Han Xu > Cc: dwmw2@infradead.org; computersforpeace@gmail.com; richard@nod.at; > miquel.raynal@bootlin.com; David Wolfe ; Fabio > Estevam ; Prabhakar Kushwaha > ; Yogesh Narayan Gaur > ; shawnguo@kernel.org; Schrempf Frieder > ; linux-kernel@vger.kernel.org > Subject: [PATCH v7 3/9] spi: Add a driver for the Freescale/NXP QuadSPI > controller >=20 > From: Frieder Schrempf >=20 > This driver is derived from the SPI NOR driver at mtd/spi-nor/fsl-quadspi= .c. It > uses the new SPI memory interface of the SPI framework to issue flash mem= ory > operations to up to four connected flash chips (2 buses with 2 CS each). >=20 > The controller does not support generic SPI messages. >=20 > This patch also disables the build of the "old" driver and reuses its Kco= nfig option > CONFIG_SPI_FSL_QUADSPI to replace it. >=20 > Signed-off-by: Frieder Schrempf Reviewed-by: Yogesh Gaur Tested-by: Yogesh Gaur -- Thanks Yogesh Gaur > --- > drivers/mtd/spi-nor/Kconfig | 9 - > drivers/mtd/spi-nor/Makefile | 1 - > drivers/spi/Kconfig | 11 + > drivers/spi/Makefile | 1 + > drivers/spi/spi-fsl-qspi.c | 966 +++++++++++++++++++++++++++++++++++++= + > 5 files changed, 978 insertions(+), 10 deletions(-) >=20 > diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig in= dex > 6cc9c92..d1ca307 100644 > --- a/drivers/mtd/spi-nor/Kconfig > +++ b/drivers/mtd/spi-nor/Kconfig > @@ -59,15 +59,6 @@ config SPI_CADENCE_QUADSPI > device with a Cadence QSPI controller and want to access the > Flash as an MTD device. >=20 > -config SPI_FSL_QUADSPI > - tristate "Freescale Quad SPI controller" > - depends on ARCH_MXC || SOC_LS1021A || ARCH_LAYERSCAPE || > COMPILE_TEST > - depends on HAS_IOMEM > - help > - This enables support for the Quad SPI controller in master mode. > - This controller does not support generic SPI. It only supports > - SPI NOR. > - > config SPI_HISI_SFC > tristate "Hisilicon SPI-NOR Flash Controller(SFC)" > depends on ARCH_HISI || COMPILE_TEST > diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile = index > f4c61d2..3f160c2e3 100644 > --- a/drivers/mtd/spi-nor/Makefile > +++ b/drivers/mtd/spi-nor/Makefile > @@ -3,7 +3,6 @@ obj-$(CONFIG_MTD_SPI_NOR) +=3D spi-nor.o > obj-$(CONFIG_SPI_ASPEED_SMC) +=3D aspeed-smc.o > obj-$(CONFIG_SPI_ATMEL_QUADSPI) +=3D atmel-quadspi.o > obj-$(CONFIG_SPI_CADENCE_QUADSPI) +=3D cadence-quadspi.o > -obj-$(CONFIG_SPI_FSL_QUADSPI) +=3D fsl-quadspi.o > obj-$(CONFIG_SPI_HISI_SFC) +=3D hisi-sfc.o > obj-$(CONFIG_MTD_MT81xx_NOR) +=3D mtk-quadspi.o > obj-$(CONFIG_SPI_NXP_SPIFI) +=3D nxp-spifi.o > diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 7d3a5c9..8c8= 4186 > 100644 > --- a/drivers/spi/Kconfig > +++ b/drivers/spi/Kconfig > @@ -259,6 +259,17 @@ config SPI_FSL_LPSPI > help > This enables Freescale i.MX LPSPI controllers in master mode. >=20 > +config SPI_FSL_QUADSPI > + tristate "Freescale QSPI controller" > + depends on ARCH_MXC || SOC_LS1021A || ARCH_LAYERSCAPE || > COMPILE_TEST > + depends on HAS_IOMEM > + help > + This enables support for the Quad SPI controller in master mode. > + Up to four flash chips can be connected on two buses with two > + chipselects each. > + This controller does not support generic SPI messages. It only > + supports the high-level SPI memory interface. > + > config SPI_GPIO > tristate "GPIO-based bitbanging SPI Master" > depends on GPIOLIB || COMPILE_TEST > diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 3575205..5= 377e61 > 100644 > --- a/drivers/spi/Makefile > +++ b/drivers/spi/Makefile > @@ -44,6 +44,7 @@ obj-$(CONFIG_SPI_FSL_DSPI) +=3D spi-fsl- > dspi.o > obj-$(CONFIG_SPI_FSL_LIB) +=3D spi-fsl-lib.o > obj-$(CONFIG_SPI_FSL_ESPI) +=3D spi-fsl-espi.o > obj-$(CONFIG_SPI_FSL_LPSPI) +=3D spi-fsl-lpspi.o > +obj-$(CONFIG_SPI_FSL_QUADSPI) +=3D spi-fsl-qspi.o > obj-$(CONFIG_SPI_FSL_SPI) +=3D spi-fsl-spi.o > obj-$(CONFIG_SPI_GPIO) +=3D spi-gpio.o > obj-$(CONFIG_SPI_IMG_SPFI) +=3D spi-img-spfi.o > diff --git a/drivers/spi/spi-fsl-qspi.c b/drivers/spi/spi-fsl-qspi.c new = file mode > 100644 index 0000000..f0a3400 > --- /dev/null > +++ b/drivers/spi/spi-fsl-qspi.c > @@ -0,0 +1,966 @@ > +// SPDX-License-Identifier: GPL-2.0+ > + > +/* > + * Freescale QuadSPI driver. > + * > + * Copyright (C) 2013 Freescale Semiconductor, Inc. > + * Copyright (C) 2018 Bootlin > + * Copyright (C) 2018 exceet electronics GmbH > + * Copyright (C) 2018 Kontron Electronics GmbH > + * > + * Transition to SPI MEM interface: > + * Authors: > + * Boris Brezillion > + * Frieder Schrempf > + * Yogesh Gaur > + * Suresh Gupta > + * > + * Based on the original fsl-quadspi.c spi-nor driver: > + * Author: Freescale Semiconductor, Inc. > + * > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include > +#include > + > +/* > + * The driver only uses one single LUT entry, that is updated on > + * each call of exec_op(). Index 0 is preset at boot with a basic > + * read operation, so let's use the last entry (15). > + */ > +#define SEQID_LUT 15 > + > +/* Registers used by the driver */ > +#define QUADSPI_MCR 0x00 > +#define QUADSPI_MCR_RESERVED_MASK GENMASK(19, 16) > +#define QUADSPI_MCR_MDIS_MASK BIT(14) > +#define QUADSPI_MCR_CLR_TXF_MASK BIT(11) > +#define QUADSPI_MCR_CLR_RXF_MASK BIT(10) > +#define QUADSPI_MCR_DDR_EN_MASK BIT(7) > +#define QUADSPI_MCR_END_CFG_MASK GENMASK(3, 2) > +#define QUADSPI_MCR_SWRSTHD_MASK BIT(1) > +#define QUADSPI_MCR_SWRSTSD_MASK BIT(0) > + > +#define QUADSPI_IPCR 0x08 > +#define QUADSPI_IPCR_SEQID(x) ((x) << 24) > + > +#define QUADSPI_BUF3CR 0x1c > +#define QUADSPI_BUF3CR_ALLMST_MASK BIT(31) > +#define QUADSPI_BUF3CR_ADATSZ(x) ((x) << 8) > +#define QUADSPI_BUF3CR_ADATSZ_MASK GENMASK(15, 8) > + > +#define QUADSPI_BFGENCR 0x20 > +#define QUADSPI_BFGENCR_SEQID(x) ((x) << 12) > + > +#define QUADSPI_BUF0IND 0x30 > +#define QUADSPI_BUF1IND 0x34 > +#define QUADSPI_BUF2IND 0x38 > +#define QUADSPI_SFAR 0x100 > + > +#define QUADSPI_SMPR 0x108 > +#define QUADSPI_SMPR_DDRSMP_MASK GENMASK(18, 16) > +#define QUADSPI_SMPR_FSDLY_MASK BIT(6) > +#define QUADSPI_SMPR_FSPHS_MASK BIT(5) > +#define QUADSPI_SMPR_HSENA_MASK BIT(0) > + > +#define QUADSPI_RBCT 0x110 > +#define QUADSPI_RBCT_WMRK_MASK GENMASK(4, 0) > +#define QUADSPI_RBCT_RXBRD_USEIPS BIT(8) > + > +#define QUADSPI_TBDR 0x154 > + > +#define QUADSPI_SR 0x15c > +#define QUADSPI_SR_IP_ACC_MASK BIT(1) > +#define QUADSPI_SR_AHB_ACC_MASK BIT(2) > + > +#define QUADSPI_FR 0x160 > +#define QUADSPI_FR_TFF_MASK BIT(0) > + > +#define QUADSPI_SPTRCLR 0x16c > +#define QUADSPI_SPTRCLR_IPPTRC BIT(8) > +#define QUADSPI_SPTRCLR_BFPTRC BIT(0) > + > +#define QUADSPI_SFA1AD 0x180 > +#define QUADSPI_SFA2AD 0x184 > +#define QUADSPI_SFB1AD 0x188 > +#define QUADSPI_SFB2AD 0x18c > +#define QUADSPI_RBDR(x) (0x200 + ((x) * 4)) > + > +#define QUADSPI_LUTKEY 0x300 > +#define QUADSPI_LUTKEY_VALUE 0x5AF05AF0 > + > +#define QUADSPI_LCKCR 0x304 > +#define QUADSPI_LCKER_LOCK BIT(0) > +#define QUADSPI_LCKER_UNLOCK BIT(1) > + > +#define QUADSPI_RSER 0x164 > +#define QUADSPI_RSER_TFIE BIT(0) > + > +#define QUADSPI_LUT_BASE 0x310 > +#define QUADSPI_LUT_OFFSET (SEQID_LUT * 4 * 4) > +#define QUADSPI_LUT_REG(idx) \ > + (QUADSPI_LUT_BASE + QUADSPI_LUT_OFFSET + (idx) * 4) > + > +/* Instruction set for the LUT register */ > +#define LUT_STOP 0 > +#define LUT_CMD 1 > +#define LUT_ADDR 2 > +#define LUT_DUMMY 3 > +#define LUT_MODE 4 > +#define LUT_MODE2 5 > +#define LUT_MODE4 6 > +#define LUT_FSL_READ 7 > +#define LUT_FSL_WRITE 8 > +#define LUT_JMP_ON_CS 9 > +#define LUT_ADDR_DDR 10 > +#define LUT_MODE_DDR 11 > +#define LUT_MODE2_DDR 12 > +#define LUT_MODE4_DDR 13 > +#define LUT_FSL_READ_DDR 14 > +#define LUT_FSL_WRITE_DDR 15 > +#define LUT_DATA_LEARN 16 > + > +/* > + * The PAD definitions for LUT register. > + * > + * The pad stands for the number of IO lines [0:3]. > + * For example, the quad read needs four IO lines, > + * so you should use LUT_PAD(4). > + */ > +#define LUT_PAD(x) (fls(x) - 1) > + > +/* > + * Macro for constructing the LUT entries with the following > + * register layout: > + * > + * --------------------------------------------------- > + * | INSTR1 | PAD1 | OPRND1 | INSTR0 | PAD0 | OPRND0 | > + * --------------------------------------------------- > + */ > +#define LUT_DEF(idx, ins, pad, opr) \ > + ((((ins) << 10) | ((pad) << 8) | (opr)) << (((idx) % 2) * 16)) > + > +/* Controller needs driver to swap endianness */ > +#define QUADSPI_QUIRK_SWAP_ENDIAN BIT(0) > + > +/* Controller needs 4x internal clock */ > +#define QUADSPI_QUIRK_4X_INT_CLK BIT(1) > + > +/* > + * TKT253890, the controller needs the driver to fill the txfifo with > + * 16 bytes at least to trigger a data transfer, even though the extra > + * data won't be transferred. > + */ > +#define QUADSPI_QUIRK_TKT253890 BIT(2) > + > +/* TKT245618, the controller cannot wake up from wait mode */ > +#define QUADSPI_QUIRK_TKT245618 BIT(3) > + > +/* > + * Controller adds QSPI_AMBA_BASE (base address of the mapped memory) > + * internally. No need to add it when setting SFXXAD and SFAR registers > +*/ > +#define QUADSPI_QUIRK_BASE_INTERNAL BIT(4) > + > +struct fsl_qspi_devtype_data { > + unsigned int rxfifo; > + unsigned int txfifo; > + unsigned int ahb_buf_size; > + unsigned int quirks; > + bool little_endian; > +}; > + > +static const struct fsl_qspi_devtype_data vybrid_data =3D { > + .rxfifo =3D SZ_128, > + .txfifo =3D SZ_64, > + .ahb_buf_size =3D SZ_1K, > + .quirks =3D QUADSPI_QUIRK_SWAP_ENDIAN, > + .little_endian =3D true, > +}; > + > +static const struct fsl_qspi_devtype_data imx6sx_data =3D { > + .rxfifo =3D SZ_128, > + .txfifo =3D SZ_512, > + .ahb_buf_size =3D SZ_1K, > + .quirks =3D QUADSPI_QUIRK_4X_INT_CLK | QUADSPI_QUIRK_TKT245618, > + .little_endian =3D true, > +}; > + > +static const struct fsl_qspi_devtype_data imx7d_data =3D { > + .rxfifo =3D SZ_512, > + .txfifo =3D SZ_512, > + .ahb_buf_size =3D SZ_1K, > + .quirks =3D QUADSPI_QUIRK_TKT253890 | QUADSPI_QUIRK_4X_INT_CLK, > + .little_endian =3D true, > +}; > + > +static const struct fsl_qspi_devtype_data imx6ul_data =3D { > + .rxfifo =3D SZ_128, > + .txfifo =3D SZ_512, > + .ahb_buf_size =3D SZ_1K, > + .quirks =3D QUADSPI_QUIRK_TKT253890 | QUADSPI_QUIRK_4X_INT_CLK, > + .little_endian =3D true, > +}; > + > +static const struct fsl_qspi_devtype_data ls1021a_data =3D { > + .rxfifo =3D SZ_128, > + .txfifo =3D SZ_64, > + .ahb_buf_size =3D SZ_1K, > + .quirks =3D 0, > + .little_endian =3D false, > +}; > + > +static const struct fsl_qspi_devtype_data ls2080a_data =3D { > + .rxfifo =3D SZ_128, > + .txfifo =3D SZ_64, > + .ahb_buf_size =3D SZ_1K, > + .quirks =3D QUADSPI_QUIRK_TKT253890 | > QUADSPI_QUIRK_BASE_INTERNAL, > + .little_endian =3D true, > +}; > + > +struct fsl_qspi { > + void __iomem *iobase; > + void __iomem *ahb_addr; > + u32 memmap_phy; > + struct clk *clk, *clk_en; > + struct device *dev; > + struct completion c; > + const struct fsl_qspi_devtype_data *devtype_data; > + struct mutex lock; > + struct pm_qos_request pm_qos_req; > + int selected; > +}; > + > +static inline int needs_swap_endian(struct fsl_qspi *q) { > + return q->devtype_data->quirks & QUADSPI_QUIRK_SWAP_ENDIAN; } > + > +static inline int needs_4x_clock(struct fsl_qspi *q) { > + return q->devtype_data->quirks & QUADSPI_QUIRK_4X_INT_CLK; } > + > +static inline int needs_fill_txfifo(struct fsl_qspi *q) { > + return q->devtype_data->quirks & QUADSPI_QUIRK_TKT253890; } > + > +static inline int needs_wakeup_wait_mode(struct fsl_qspi *q) { > + return q->devtype_data->quirks & QUADSPI_QUIRK_TKT245618; } > + > +static inline int needs_amba_base_offset(struct fsl_qspi *q) { > + return !(q->devtype_data->quirks & > QUADSPI_QUIRK_BASE_INTERNAL); } > + > +/* > + * An IC bug makes it necessary to rearrange the 32-bit data. > + * Later chips, such as IMX6SLX, have fixed this bug. > + */ > +static inline u32 fsl_qspi_endian_xchg(struct fsl_qspi *q, u32 a) { > + return needs_swap_endian(q) ? __swab32(a) : a; } > + > +/* > + * R/W functions for big- or little-endian registers: > + * The QSPI controller's endianness is independent of > + * the CPU core's endianness. So far, although the CPU > + * core is little-endian the QSPI controller can use > + * big-endian or little-endian. > + */ > +static void qspi_writel(struct fsl_qspi *q, u32 val, void __iomem > +*addr) { > + if (q->devtype_data->little_endian) > + iowrite32(val, addr); > + else > + iowrite32be(val, addr); > +} > + > +static u32 qspi_readl(struct fsl_qspi *q, void __iomem *addr) { > + if (q->devtype_data->little_endian) > + return ioread32(addr); > + > + return ioread32be(addr); > +} > + > +static irqreturn_t fsl_qspi_irq_handler(int irq, void *dev_id) { > + struct fsl_qspi *q =3D dev_id; > + u32 reg; > + > + /* clear interrupt */ > + reg =3D qspi_readl(q, q->iobase + QUADSPI_FR); > + qspi_writel(q, reg, q->iobase + QUADSPI_FR); > + > + if (reg & QUADSPI_FR_TFF_MASK) > + complete(&q->c); > + > + dev_dbg(q->dev, "QUADSPI_FR : 0x%.8x:0x%.8x\n", 0, reg); > + return IRQ_HANDLED; > +} > + > +static int fsl_qspi_check_buswidth(struct fsl_qspi *q, u8 width) { > + switch (width) { > + case 1: > + case 2: > + case 4: > + return 0; > + } > + > + return -ENOTSUPP; > +} > + > +static bool fsl_qspi_supports_op(struct spi_mem *mem, > + const struct spi_mem_op *op) > +{ > + struct fsl_qspi *q =3D spi_controller_get_devdata(mem->spi->master); > + int ret; > + > + ret =3D fsl_qspi_check_buswidth(q, op->cmd.buswidth); > + > + if (op->addr.nbytes) > + ret |=3D fsl_qspi_check_buswidth(q, op->addr.buswidth); > + > + if (op->dummy.nbytes) > + ret |=3D fsl_qspi_check_buswidth(q, op->dummy.buswidth); > + > + if (op->data.nbytes) > + ret |=3D fsl_qspi_check_buswidth(q, op->data.buswidth); > + > + if (ret) > + return false; > + > + /* > + * The number of instructions needed for the op, needs > + * to fit into a single LUT entry. > + */ > + if (op->addr.nbytes + > + (op->dummy.nbytes ? 1:0) + > + (op->data.nbytes ? 1:0) > 6) > + return false; > + > + /* Max 64 dummy clock cycles supported */ > + if (op->dummy.nbytes && > + (op->dummy.nbytes * 8 / op->dummy.buswidth > 64)) > + return false; > + > + /* Max data length, check controller limits and alignment */ > + if (op->data.dir =3D=3D SPI_MEM_DATA_IN && > + (op->data.nbytes > q->devtype_data->ahb_buf_size || > + (op->data.nbytes > q->devtype_data->rxfifo - 4 && > + !IS_ALIGNED(op->data.nbytes, 8)))) > + return false; > + > + if (op->data.dir =3D=3D SPI_MEM_DATA_OUT && > + op->data.nbytes > q->devtype_data->txfifo) > + return false; > + > + return true; > +} > + > +static void fsl_qspi_prepare_lut(struct fsl_qspi *q, > + const struct spi_mem_op *op) > +{ > + void __iomem *base =3D q->iobase; > + u32 lutval[4] =3D {}; > + int lutidx =3D 1, i; > + > + lutval[0] |=3D LUT_DEF(0, LUT_CMD, LUT_PAD(op->cmd.buswidth), > + op->cmd.opcode); > + > + /* > + * For some unknown reason, using LUT_ADDR doesn't work in some > + * cases (at least with only one byte long addresses), so > + * let's use LUT_MODE to write the address bytes one by one > + */ > + for (i =3D 0; i < op->addr.nbytes; i++) { > + u8 addrbyte =3D op->addr.val >> (8 * (op->addr.nbytes - i - 1)); > + > + lutval[lutidx / 2] |=3D LUT_DEF(lutidx, LUT_MODE, > + LUT_PAD(op->addr.buswidth), > + addrbyte); > + lutidx++; > + } > + > + if (op->dummy.nbytes) { > + lutval[lutidx / 2] |=3D LUT_DEF(lutidx, LUT_DUMMY, > + LUT_PAD(op->dummy.buswidth), > + op->dummy.nbytes * 8 / > + op->dummy.buswidth); > + lutidx++; > + } > + > + if (op->data.nbytes) { > + lutval[lutidx / 2] |=3D LUT_DEF(lutidx, > + op->data.dir =3D=3D > SPI_MEM_DATA_IN ? > + LUT_FSL_READ : LUT_FSL_WRITE, > + LUT_PAD(op->data.buswidth), > + 0); > + lutidx++; > + } > + > + lutval[lutidx / 2] |=3D LUT_DEF(lutidx, LUT_STOP, 0, 0); > + > + /* unlock LUT */ > + qspi_writel(q, QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY); > + qspi_writel(q, QUADSPI_LCKER_UNLOCK, q->iobase + QUADSPI_LCKCR); > + > + /* fill LUT */ > + for (i =3D 0; i < ARRAY_SIZE(lutval); i++) > + qspi_writel(q, lutval[i], base + QUADSPI_LUT_REG(i)); > + > + /* lock LUT */ > + qspi_writel(q, QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY); > + qspi_writel(q, QUADSPI_LCKER_LOCK, q->iobase + QUADSPI_LCKCR); } > + > +static int fsl_qspi_clk_prep_enable(struct fsl_qspi *q) { > + int ret; > + > + ret =3D clk_prepare_enable(q->clk_en); > + if (ret) > + return ret; > + > + ret =3D clk_prepare_enable(q->clk); > + if (ret) { > + clk_disable_unprepare(q->clk_en); > + return ret; > + } > + > + if (needs_wakeup_wait_mode(q)) > + pm_qos_add_request(&q->pm_qos_req, > PM_QOS_CPU_DMA_LATENCY, 0); > + > + return 0; > +} > + > +static void fsl_qspi_clk_disable_unprep(struct fsl_qspi *q) { > + if (needs_wakeup_wait_mode(q)) > + pm_qos_remove_request(&q->pm_qos_req); > + > + clk_disable_unprepare(q->clk); > + clk_disable_unprepare(q->clk_en); > +} > + > +/* > + * If we have changed the content of the flash by writing or erasing, > +or if we > + * read from flash with a different offset into the page buffer, we > +need to > + * invalidate the AHB buffer. If we do not do so, we may read out the > +wrong > + * data. The spec tells us reset the AHB domain and Serial Flash domain > +at > + * the same time. > + */ > +static void fsl_qspi_invalidate(struct fsl_qspi *q) { > + u32 reg; > + > + reg =3D qspi_readl(q, q->iobase + QUADSPI_MCR); > + reg |=3D QUADSPI_MCR_SWRSTHD_MASK | > QUADSPI_MCR_SWRSTSD_MASK; > + qspi_writel(q, reg, q->iobase + QUADSPI_MCR); > + > + /* > + * The minimum delay : 1 AHB + 2 SFCK clocks. > + * Delay 1 us is enough. > + */ > + udelay(1); > + > + reg &=3D ~(QUADSPI_MCR_SWRSTHD_MASK | > QUADSPI_MCR_SWRSTSD_MASK); > + qspi_writel(q, reg, q->iobase + QUADSPI_MCR); } > + > +static void fsl_qspi_select_mem(struct fsl_qspi *q, struct spi_device > +*spi) { > + unsigned long rate =3D spi->max_speed_hz; > + int ret; > + > + if (q->selected =3D=3D spi->chip_select) > + return; > + > + if (needs_4x_clock(q)) > + rate *=3D 4; > + > + fsl_qspi_clk_disable_unprep(q); > + > + ret =3D clk_set_rate(q->clk, rate); > + if (ret) > + return; > + > + ret =3D fsl_qspi_clk_prep_enable(q); > + if (ret) > + return; > + > + q->selected =3D spi->chip_select; > + > + fsl_qspi_invalidate(q); > +} > + > +static void fsl_qspi_read_ahb(struct fsl_qspi *q, const struct > +spi_mem_op *op) { > + memcpy_fromio(op->data.buf.in, > + q->ahb_addr + q->selected * q->devtype_data- > >ahb_buf_size, > + op->data.nbytes); > +} > + > +static void fsl_qspi_fill_txfifo(struct fsl_qspi *q, > + const struct spi_mem_op *op) > +{ > + void __iomem *base =3D q->iobase; > + int i; > + u32 val; > + > + for (i =3D 0; i < ALIGN_DOWN(op->data.nbytes, 4); i +=3D 4) { > + memcpy(&val, op->data.buf.out + i, 4); > + val =3D fsl_qspi_endian_xchg(q, val); > + qspi_writel(q, val, base + QUADSPI_TBDR); > + } > + > + if (i < op->data.nbytes) { > + memcpy(&val, op->data.buf.out + i, op->data.nbytes - i); > + val =3D fsl_qspi_endian_xchg(q, val); > + qspi_writel(q, val, base + QUADSPI_TBDR); > + } > + > + if (needs_fill_txfifo(q)) { > + for (i =3D op->data.nbytes; i < 16; i +=3D 4) > + qspi_writel(q, 0, base + QUADSPI_TBDR); > + } > +} > + > +static void fsl_qspi_read_rxfifo(struct fsl_qspi *q, > + const struct spi_mem_op *op) > +{ > + void __iomem *base =3D q->iobase; > + int i; > + u8 *buf =3D op->data.buf.in; > + u32 val; > + > + for (i =3D 0; i < ALIGN_DOWN(op->data.nbytes, 4); i +=3D 4) { > + val =3D qspi_readl(q, base + QUADSPI_RBDR(i / 4)); > + val =3D fsl_qspi_endian_xchg(q, val); > + memcpy(buf + i, &val, 4); > + } > + > + if (i < op->data.nbytes) { > + val =3D qspi_readl(q, base + QUADSPI_RBDR(i / 4)); > + val =3D fsl_qspi_endian_xchg(q, val); > + memcpy(buf + i, &val, op->data.nbytes - i); > + } > +} > + > +static int fsl_qspi_do_op(struct fsl_qspi *q, const struct spi_mem_op > +*op) { > + void __iomem *base =3D q->iobase; > + int err =3D 0; > + > + init_completion(&q->c); > + > + /* > + * Always start the sequence at the same index since we update > + * the LUT at each exec_op() call. And also specify the DATA > + * length, since it's has not been specified in the LUT. > + */ > + qspi_writel(q, op->data.nbytes | QUADSPI_IPCR_SEQID(SEQID_LUT), > + base + QUADSPI_IPCR); > + > + /* Wait for the interrupt. */ > + if (!wait_for_completion_timeout(&q->c, msecs_to_jiffies(1000))) > + err =3D -ETIMEDOUT; > + > + if (!err && op->data.nbytes && op->data.dir =3D=3D SPI_MEM_DATA_IN) > + fsl_qspi_read_rxfifo(q, op); > + > + return err; > +} > + > +static int fsl_qspi_readl_poll_tout(struct fsl_qspi *q, void __iomem *ba= se, > + u32 mask, u32 delay_us, u32 timeout_us) { > + u32 reg; > + > + if (!q->devtype_data->little_endian) > + mask =3D (u32)cpu_to_be32(mask); > + > + return readl_poll_timeout(base, reg, !(reg & mask), delay_us, > + timeout_us); > +} > + > +static int fsl_qspi_exec_op(struct spi_mem *mem, const struct > +spi_mem_op *op) { > + struct fsl_qspi *q =3D spi_controller_get_devdata(mem->spi->master); > + void __iomem *base =3D q->iobase; > + u32 addr_offset =3D 0; > + int err =3D 0; > + > + mutex_lock(&q->lock); > + > + /* wait for the controller being ready */ > + fsl_qspi_readl_poll_tout(q, base + QUADSPI_SR, > (QUADSPI_SR_IP_ACC_MASK | > + QUADSPI_SR_AHB_ACC_MASK), 10, 1000); > + > + fsl_qspi_select_mem(q, mem->spi); > + > + if (needs_amba_base_offset(q)) > + addr_offset =3D q->memmap_phy; > + > + qspi_writel(q, > + q->selected * q->devtype_data->ahb_buf_size + addr_offset, > + base + QUADSPI_SFAR); > + > + qspi_writel(q, qspi_readl(q, base + QUADSPI_MCR) | > + QUADSPI_MCR_CLR_RXF_MASK | > QUADSPI_MCR_CLR_TXF_MASK, > + base + QUADSPI_MCR); > + > + qspi_writel(q, QUADSPI_SPTRCLR_BFPTRC | QUADSPI_SPTRCLR_IPPTRC, > + base + QUADSPI_SPTRCLR); > + > + fsl_qspi_prepare_lut(q, op); > + > + /* > + * If we have large chunks of data, we read them through the AHB bus > + * by accessing the mapped memory. In all other cases we use > + * IP commands to access the flash. > + */ > + if (op->data.nbytes > (q->devtype_data->rxfifo - 4) && > + op->data.dir =3D=3D SPI_MEM_DATA_IN) { > + fsl_qspi_read_ahb(q, op); > + } else { > + qspi_writel(q, QUADSPI_RBCT_WMRK_MASK | > + QUADSPI_RBCT_RXBRD_USEIPS, base + > QUADSPI_RBCT); > + > + if (op->data.nbytes && op->data.dir =3D=3D SPI_MEM_DATA_OUT) > + fsl_qspi_fill_txfifo(q, op); > + > + err =3D fsl_qspi_do_op(q, op); > + } > + > + /* Invalidate the data in the AHB buffer. */ > + fsl_qspi_invalidate(q); > + > + mutex_unlock(&q->lock); > + > + return err; > +} > + > +static int fsl_qspi_adjust_op_size(struct spi_mem *mem, struct > +spi_mem_op *op) { > + struct fsl_qspi *q =3D spi_controller_get_devdata(mem->spi->master); > + > + if (op->data.dir =3D=3D SPI_MEM_DATA_OUT) { > + if (op->data.nbytes > q->devtype_data->txfifo) > + op->data.nbytes =3D q->devtype_data->txfifo; > + } else { > + if (op->data.nbytes > q->devtype_data->ahb_buf_size) > + op->data.nbytes =3D q->devtype_data->ahb_buf_size; > + else if (op->data.nbytes > (q->devtype_data->rxfifo - 4)) > + op->data.nbytes =3D ALIGN_DOWN(op->data.nbytes, 8); > + } > + > + return 0; > +} > + > +static int fsl_qspi_default_setup(struct fsl_qspi *q) { > + void __iomem *base =3D q->iobase; > + u32 reg, addr_offset =3D 0; > + int ret; > + > + /* disable and unprepare clock to avoid glitch pass to controller */ > + fsl_qspi_clk_disable_unprep(q); > + > + /* the default frequency, we will change it later if necessary. */ > + ret =3D clk_set_rate(q->clk, 66000000); > + if (ret) > + return ret; > + > + ret =3D fsl_qspi_clk_prep_enable(q); > + if (ret) > + return ret; > + > + /* Reset the module */ > + qspi_writel(q, QUADSPI_MCR_SWRSTSD_MASK | > QUADSPI_MCR_SWRSTHD_MASK, > + base + QUADSPI_MCR); > + udelay(1); > + > + /* Disable the module */ > + qspi_writel(q, QUADSPI_MCR_MDIS_MASK | > QUADSPI_MCR_RESERVED_MASK, > + base + QUADSPI_MCR); > + > + reg =3D qspi_readl(q, base + QUADSPI_SMPR); > + qspi_writel(q, reg & ~(QUADSPI_SMPR_FSDLY_MASK > + | QUADSPI_SMPR_FSPHS_MASK > + | QUADSPI_SMPR_HSENA_MASK > + | QUADSPI_SMPR_DDRSMP_MASK), base + > QUADSPI_SMPR); > + > + /* We only use the buffer3 for AHB read */ > + qspi_writel(q, 0, base + QUADSPI_BUF0IND); > + qspi_writel(q, 0, base + QUADSPI_BUF1IND); > + qspi_writel(q, 0, base + QUADSPI_BUF2IND); > + > + qspi_writel(q, QUADSPI_BFGENCR_SEQID(SEQID_LUT), > + q->iobase + QUADSPI_BFGENCR); > + qspi_writel(q, QUADSPI_RBCT_WMRK_MASK, base + QUADSPI_RBCT); > + qspi_writel(q, QUADSPI_BUF3CR_ALLMST_MASK | > + QUADSPI_BUF3CR_ADATSZ(q->devtype_data->ahb_buf_size / > 8), > + base + QUADSPI_BUF3CR); > + > + if (needs_amba_base_offset(q)) > + addr_offset =3D q->memmap_phy; > + > + /* > + * In HW there can be a maximum of four chips on two buses with > + * two chip selects on each bus. We use four chip selects in SW > + * to differentiate between the four chips. > + * We use ahb_buf_size for each chip and set SFA1AD, SFA2AD, SFB1AD, > + * SFB2AD accordingly. > + */ > + qspi_writel(q, q->devtype_data->ahb_buf_size + addr_offset, > + base + QUADSPI_SFA1AD); > + qspi_writel(q, q->devtype_data->ahb_buf_size * 2 + addr_offset, > + base + QUADSPI_SFA2AD); > + qspi_writel(q, q->devtype_data->ahb_buf_size * 3 + addr_offset, > + base + QUADSPI_SFB1AD); > + qspi_writel(q, q->devtype_data->ahb_buf_size * 4 + addr_offset, > + base + QUADSPI_SFB2AD); > + > + q->selected =3D -1; > + > + /* Enable the module */ > + qspi_writel(q, QUADSPI_MCR_RESERVED_MASK | > QUADSPI_MCR_END_CFG_MASK, > + base + QUADSPI_MCR); > + > + /* clear all interrupt status */ > + qspi_writel(q, 0xffffffff, q->iobase + QUADSPI_FR); > + > + /* enable the interrupt */ > + qspi_writel(q, QUADSPI_RSER_TFIE, q->iobase + QUADSPI_RSER); > + > + return 0; > +} > + > +static const char *fsl_qspi_get_name(struct spi_mem *mem) { > + struct fsl_qspi *q =3D spi_controller_get_devdata(mem->spi->master); > + struct device *dev =3D &mem->spi->dev; > + const char *name; > + > + /* > + * In order to keep mtdparts compatible with the old MTD driver at > + * mtd/spi-nor/fsl-quadspi.c, we set a custom name derived from the > + * platform_device of the controller. > + */ > + if (of_get_available_child_count(q->dev->of_node) =3D=3D 1) > + return dev_name(q->dev); > + > + name =3D devm_kasprintf(dev, GFP_KERNEL, > + "%s-%d", dev_name(q->dev), > + mem->spi->chip_select); > + > + if (!name) { > + dev_err(dev, "failed to get memory for custom flash name\n"); > + return ERR_PTR(-ENOMEM); > + } > + > + return name; > +} > + > +static const struct spi_controller_mem_ops fsl_qspi_mem_ops =3D { > + .adjust_op_size =3D fsl_qspi_adjust_op_size, > + .supports_op =3D fsl_qspi_supports_op, > + .exec_op =3D fsl_qspi_exec_op, > + .get_name =3D fsl_qspi_get_name, > +}; > + > +static int fsl_qspi_probe(struct platform_device *pdev) { > + struct spi_controller *ctlr; > + struct device *dev =3D &pdev->dev; > + struct device_node *np =3D dev->of_node; > + struct resource *res; > + struct fsl_qspi *q; > + int ret; > + > + ctlr =3D spi_alloc_master(&pdev->dev, sizeof(*q)); > + if (!ctlr) > + return -ENOMEM; > + > + ctlr->mode_bits =3D SPI_RX_DUAL | SPI_RX_QUAD | > + SPI_TX_DUAL | SPI_TX_QUAD; > + > + q =3D spi_controller_get_devdata(ctlr); > + q->dev =3D dev; > + q->devtype_data =3D of_device_get_match_data(dev); > + if (!q->devtype_data) { > + ret =3D -ENODEV; > + goto err_put_ctrl; > + } > + > + platform_set_drvdata(pdev, q); > + > + /* find the resources */ > + res =3D platform_get_resource_byname(pdev, IORESOURCE_MEM, > "QuadSPI"); > + q->iobase =3D devm_ioremap_resource(dev, res); > + if (IS_ERR(q->iobase)) { > + ret =3D PTR_ERR(q->iobase); > + goto err_put_ctrl; > + } > + > + res =3D platform_get_resource_byname(pdev, IORESOURCE_MEM, > + "QuadSPI-memory"); > + q->ahb_addr =3D devm_ioremap_resource(dev, res); > + if (IS_ERR(q->ahb_addr)) { > + ret =3D PTR_ERR(q->ahb_addr); > + goto err_put_ctrl; > + } > + > + q->memmap_phy =3D res->start; > + > + /* find the clocks */ > + q->clk_en =3D devm_clk_get(dev, "qspi_en"); > + if (IS_ERR(q->clk_en)) { > + ret =3D PTR_ERR(q->clk_en); > + goto err_put_ctrl; > + } > + > + q->clk =3D devm_clk_get(dev, "qspi"); > + if (IS_ERR(q->clk)) { > + ret =3D PTR_ERR(q->clk); > + goto err_put_ctrl; > + } > + > + ret =3D fsl_qspi_clk_prep_enable(q); > + if (ret) { > + dev_err(dev, "can not enable the clock\n"); > + goto err_put_ctrl; > + } > + > + /* find the irq */ > + ret =3D platform_get_irq(pdev, 0); > + if (ret < 0) { > + dev_err(dev, "failed to get the irq: %d\n", ret); > + goto err_disable_clk; > + } > + > + ret =3D devm_request_irq(dev, ret, > + fsl_qspi_irq_handler, 0, pdev->name, q); > + if (ret) { > + dev_err(dev, "failed to request irq: %d\n", ret); > + goto err_disable_clk; > + } > + > + mutex_init(&q->lock); > + > + ctlr->bus_num =3D -1; > + ctlr->num_chipselect =3D 4; > + ctlr->mem_ops =3D &fsl_qspi_mem_ops; > + > + fsl_qspi_default_setup(q); > + > + ctlr->dev.of_node =3D np; > + > + ret =3D spi_register_controller(ctlr); > + if (ret) > + goto err_destroy_mutex; > + > + return 0; > + > +err_destroy_mutex: > + mutex_destroy(&q->lock); > + > +err_disable_clk: > + fsl_qspi_clk_disable_unprep(q); > + > +err_put_ctrl: > + spi_controller_put(ctlr); > + > + dev_err(dev, "Freescale QuadSPI probe failed\n"); > + return ret; > +} > + > +static int fsl_qspi_remove(struct platform_device *pdev) { > + struct fsl_qspi *q =3D platform_get_drvdata(pdev); > + > + /* disable the hardware */ > + qspi_writel(q, QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR); > + qspi_writel(q, 0x0, q->iobase + QUADSPI_RSER); > + > + fsl_qspi_clk_disable_unprep(q); > + > + mutex_destroy(&q->lock); > + > + return 0; > +} > + > +static int fsl_qspi_suspend(struct device *dev) { > + return 0; > +} > + > +static int fsl_qspi_resume(struct device *dev) { > + struct fsl_qspi *q =3D dev_get_drvdata(dev); > + > + fsl_qspi_default_setup(q); > + > + return 0; > +} > + > +static const struct of_device_id fsl_qspi_dt_ids[] =3D { > + { .compatible =3D "fsl,vf610-qspi", .data =3D &vybrid_data, }, > + { .compatible =3D "fsl,imx6sx-qspi", .data =3D &imx6sx_data, }, > + { .compatible =3D "fsl,imx7d-qspi", .data =3D &imx7d_data, }, > + { .compatible =3D "fsl,imx6ul-qspi", .data =3D &imx6ul_data, }, > + { .compatible =3D "fsl,ls1021a-qspi", .data =3D &ls1021a_data, }, > + { .compatible =3D "fsl,ls2080a-qspi", .data =3D &ls2080a_data, }, > + { /* sentinel */ } > +}; > +MODULE_DEVICE_TABLE(of, fsl_qspi_dt_ids); > + > +static const struct dev_pm_ops fsl_qspi_pm_ops =3D { > + .suspend =3D fsl_qspi_suspend, > + .resume =3D fsl_qspi_resume, > +}; > + > +static struct platform_driver fsl_qspi_driver =3D { > + .driver =3D { > + .name =3D "fsl-quadspi", > + .of_match_table =3D fsl_qspi_dt_ids, > + .pm =3D &fsl_qspi_pm_ops, > + }, > + .probe =3D fsl_qspi_probe, > + .remove =3D fsl_qspi_remove, > +}; > +module_platform_driver(fsl_qspi_driver); > + > +MODULE_DESCRIPTION("Freescale QuadSPI Controller Driver"); > +MODULE_AUTHOR("Freescale Semiconductor Inc."); MODULE_AUTHOR("Boris > +Brezillion "); MODULE_AUTHOR("Frieder > +Schrempf "); MODULE_AUTHOR("Yogesh Gaur > +"); MODULE_AUTHOR("Suresh Gupta > +"); MODULE_LICENSE("GPL v2"); > -- > 2.7.4