From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Vinod Koul <vkoul@kernel.org>
Cc: Mark Brown <broonie@kernel.org>,
linux-arm-msm@vger.kernel.org, Andy Gross <agross@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH 2/2] regulator: qcom-rpmh: Add support for PM8350/PM8350c
Date: Thu, 3 Dec 2020 17:45:17 -0600 [thread overview]
Message-ID: <X8l4jThf8XlRnyjy@builder.lan> (raw)
In-Reply-To: <20201203071244.2652297-2-vkoul@kernel.org>
On Thu 03 Dec 01:12 CST 2020, Vinod Koul wrote:
> Add support from RPMH regulators found in PM8350 and PM8350c PMICs
>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
> drivers/regulator/qcom-rpmh-regulator.c | 62 +++++++++++++++++++++++++
> 1 file changed, 62 insertions(+)
>
> diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
> index d488325499a9..800072b90efd 100644
> --- a/drivers/regulator/qcom-rpmh-regulator.c
> +++ b/drivers/regulator/qcom-rpmh-regulator.c
> @@ -865,6 +865,60 @@ static const struct rpmh_vreg_init_data pm8150l_vreg_data[] = {
> {},
> };
>
> +static const struct rpmh_vreg_init_data pm8350_vreg_data[] = {
> + RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps510, "vdd-s1"),
> + RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps510, "vdd-s2"),
> + RPMH_VREG("smps3", "smp%s3", &pmic5_ftsmps510, "vdd-s3"),
> + RPMH_VREG("smps4", "smp%s4", &pmic5_ftsmps510, "vdd-s4"),
> + RPMH_VREG("smps5", "smp%s5", &pmic5_ftsmps510, "vdd-s5"),
> + RPMH_VREG("smps6", "smp%s6", &pmic5_ftsmps510, "vdd-s6"),
> + RPMH_VREG("smps7", "smp%s7", &pmic5_ftsmps510, "vdd-s7"),
> + RPMH_VREG("smps8", "smp%s8", &pmic5_ftsmps510, "vdd-s8"),
> + RPMH_VREG("smps9", "smp%s9", &pmic5_ftsmps510, "vdd-s9"),
> + RPMH_VREG("smps10", "smp%s10", &pmic5_hfsmps510, "vdd-s10"),
> + RPMH_VREG("smps11", "smp%s11", &pmic5_hfsmps510, "vdd-s11"),
> + RPMH_VREG("smps12", "smp%s12", &pmic5_hfsmps510, "vdd-s12"),
> + RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1-l4"),
> + RPMH_VREG("ldo2", "ldo%s2", &pmic5_pldo, "vdd-l2-l7"),
> + RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3-l5"),
> + RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l1-l4"),
> + RPMH_VREG("ldo5", "ldo%s5", &pmic5_nldo, "vdd-l3-l5"),
> + RPMH_VREG("ldo6", "ldo%s6", &pmic5_nldo, "vdd-l6-l9-l10"),
> + RPMH_VREG("ldo7", "ldo%s7", &pmic5_pldo, "vdd-l2-l7"),
> + RPMH_VREG("ldo8", "ldo%s8", &pmic5_nldo, "vdd-l8"),
> + RPMH_VREG("ldo9", "ldo%s9", &pmic5_nldo, "vdd-l6-l9-l10"),
> + RPMH_VREG("ldo10", "ldo%s10", &pmic5_nldo, "vdd-l6-l9-l10"),
> + {},
> +};
> +
> +static const struct rpmh_vreg_init_data pm8350c_vreg_data[] = {
> + RPMH_VREG("smps1", "smp%s1", &pmic5_hfsmps510, "vdd-s1"),
> + RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps510, "vdd-s2"),
> + RPMH_VREG("smps3", "smp%s3", &pmic5_ftsmps510, "vdd-s3"),
> + RPMH_VREG("smps4", "smp%s4", &pmic5_ftsmps510, "vdd-s4"),
> + RPMH_VREG("smps5", "smp%s5", &pmic5_ftsmps510, "vdd-s5"),
> + RPMH_VREG("smps6", "smp%s6", &pmic5_ftsmps510, "vdd-s6"),
> + RPMH_VREG("smps7", "smp%s7", &pmic5_ftsmps510, "vdd-s7"),
> + RPMH_VREG("smps8", "smp%s8", &pmic5_ftsmps510, "vdd-s8"),
> + RPMH_VREG("smps9", "smp%s9", &pmic5_ftsmps510, "vdd-s9"),
> + RPMH_VREG("smps10", "smp%s10", &pmic5_ftsmps510, "vdd-s10"),
> + RPMH_VREG("ldo1", "ldo%s1", &pmic5_pldo_lv, "vdd-l1-l12"),
> + RPMH_VREG("ldo2", "ldo%s2", &pmic5_pldo_lv, "vdd-l2-l8"),
> + RPMH_VREG("ldo3", "ldo%s3", &pmic5_pldo, "vdd-l3-l4-l5-l7-l13"),
> + RPMH_VREG("ldo4", "ldo%s4", &pmic5_pldo, "vdd-l3-l4-l5-l7-l13"),
> + RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l3-l4-l5-l7-l13"),
> + RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo, "vdd-l6-l9-l11"),
> + RPMH_VREG("ldo7", "ldo%s7", &pmic5_pldo, "vdd-l3-l4-l5-l7-l13"),
> + RPMH_VREG("ldo8", "ldo%s8", &pmic5_pldo_lv, "vdd-l2-l8"),
> + RPMH_VREG("ldo9", "ldo%s9", &pmic5_pldo, "vdd-l6-l9-l11"),
> + RPMH_VREG("ldo10", "ldo%s10", &pmic5_nldo, "vdd-l10"),
> + RPMH_VREG("ldo11", "ldo%s11", &pmic5_pldo, "vdd-l6-l9-l11"),
> + RPMH_VREG("ldo12", "ldo%s12", &pmic5_pldo_lv, "vdd-l1-l12"),
> + RPMH_VREG("ldo13", "ldo%s13", &pmic5_pldo, "vdd-l3-l4-l5-l7-l13"),
> + RPMH_VREG("bob", "bob%s1", &pmic5_bob, "vdd-bob"),
> + {},
> +};
> +
> static const struct rpmh_vreg_init_data pm8009_vreg_data[] = {
> RPMH_VREG("smps1", "smp%s1", &pmic5_hfsmps510, "vdd-s1"),
> RPMH_VREG("smps2", "smp%s2", &pmic5_hfsmps515, "vdd-s2"),
> @@ -984,6 +1038,14 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = {
> .compatible = "qcom,pm8150l-rpmh-regulators",
> .data = pm8150l_vreg_data,
> },
> + {
> + .compatible = "qcom,pm8350-rpmh-regulators",
> + .data = pm8350_vreg_data,
> + },
> + {
> + .compatible = "qcom,pm8350c-rpmh-regulators",
> + .data = pm8350c_vreg_data,
> + },
> {
> .compatible = "qcom,pm8998-rpmh-regulators",
> .data = pm8998_vreg_data,
> --
> 2.26.2
>
next prev parent reply other threads:[~2020-12-03 23:46 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-03 7:12 [PATCH 1/2] regulator: dt-bindings: Add PM8350x compatibles Vinod Koul
2020-12-03 7:12 ` [PATCH 2/2] regulator: qcom-rpmh: Add support for PM8350/PM8350c Vinod Koul
2020-12-03 23:45 ` Bjorn Andersson [this message]
2020-12-03 23:33 ` [PATCH 1/2] regulator: dt-bindings: Add PM8350x compatibles Bjorn Andersson
2020-12-04 23:31 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=X8l4jThf8XlRnyjy@builder.lan \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).