From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Vinod Koul <vkoul@kernel.org>
Cc: Stephen Boyd <sboyd@kernel.org>, Andy Gross <agross@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Rob Herring <robh+dt@kernel.org>,
Taniya Das <tdas@codeaurora.org>,
linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/5] clk: qcom: rpmh: add support for SM8350 rpmh clocks
Date: Thu, 3 Dec 2020 17:55:57 -0600 [thread overview]
Message-ID: <X8l7DSGiQ69Tydzc@builder.lan> (raw)
In-Reply-To: <20201203070241.2648874-3-vkoul@kernel.org>
On Thu 03 Dec 01:02 CST 2020, Vinod Koul wrote:
> This adds the RPMH clocks present in SM8350 SoC
>
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Regards,
Bjorn
> ---
> drivers/clk/qcom/clk-rpmh.c | 34 +++++++++++++++++++++++++++
> include/dt-bindings/clock/qcom,rpmh.h | 8 +++++++
> 2 files changed, 42 insertions(+)
>
> diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c
> index e2c669b08aff..64cab4403a17 100644
> --- a/drivers/clk/qcom/clk-rpmh.c
> +++ b/drivers/clk/qcom/clk-rpmh.c
> @@ -432,6 +432,39 @@ static const struct clk_rpmh_desc clk_rpmh_sm8250 = {
> .num_clks = ARRAY_SIZE(sm8250_rpmh_clocks),
> };
>
> +DEFINE_CLK_RPMH_VRM(sm8350, div_clk1, div_clk1_ao, "divclka1", 2);
> +DEFINE_CLK_RPMH_VRM(sm8350, rf_clk4, rf_clk4_ao, "rfclka4", 1);
> +DEFINE_CLK_RPMH_VRM(sm8350, rf_clk5, rf_clk5_ao, "rfclka5", 1);
> +DEFINE_CLK_RPMH_BCM(sm8350, pka, "PKA0");
> +DEFINE_CLK_RPMH_BCM(sm8350, hwkm, "HK0");
> +
> +static struct clk_hw *sm8350_rpmh_clocks[] = {
> + [RPMH_CXO_CLK] = &sdm845_bi_tcxo.hw,
> + [RPMH_CXO_CLK_A] = &sdm845_bi_tcxo_ao.hw,
> + [RPMH_DIV_CLK1] = &sm8350_div_clk1.hw,
> + [RPMH_DIV_CLK1_A] = &sm8350_div_clk1_ao.hw,
> + [RPMH_LN_BB_CLK1] = &sm8250_ln_bb_clk1.hw,
> + [RPMH_LN_BB_CLK1_A] = &sm8250_ln_bb_clk1_ao.hw,
> + [RPMH_LN_BB_CLK2] = &sdm845_ln_bb_clk2.hw,
> + [RPMH_LN_BB_CLK2_A] = &sdm845_ln_bb_clk2_ao.hw,
> + [RPMH_RF_CLK1] = &sdm845_rf_clk1.hw,
> + [RPMH_RF_CLK1_A] = &sdm845_rf_clk1_ao.hw,
> + [RPMH_RF_CLK3] = &sdm845_rf_clk3.hw,
> + [RPMH_RF_CLK3_A] = &sdm845_rf_clk3_ao.hw,
> + [RPMH_RF_CLK4] = &sm8350_rf_clk4.hw,
> + [RPMH_RF_CLK4_A] = &sm8350_rf_clk4_ao.hw,
> + [RPMH_RF_CLK5] = &sm8350_rf_clk5.hw,
> + [RPMH_RF_CLK5_A] = &sm8350_rf_clk5_ao.hw,
> + [RPMH_IPA_CLK] = &sdm845_ipa.hw,
> + [RPMH_PKA_CLK] = &sm8350_pka.hw,
> + [RPMH_HWKM_CLK] = &sm8350_hwkm.hw,
> +};
> +
> +static const struct clk_rpmh_desc clk_rpmh_sm8350 = {
> + .clks = sm8350_rpmh_clocks,
> + .num_clks = ARRAY_SIZE(sm8350_rpmh_clocks),
> +};
> +
> static struct clk_hw *of_clk_rpmh_hw_get(struct of_phandle_args *clkspec,
> void *data)
> {
> @@ -519,6 +552,7 @@ static const struct of_device_id clk_rpmh_match_table[] = {
> { .compatible = "qcom,sdm845-rpmh-clk", .data = &clk_rpmh_sdm845},
> { .compatible = "qcom,sm8150-rpmh-clk", .data = &clk_rpmh_sm8150},
> { .compatible = "qcom,sm8250-rpmh-clk", .data = &clk_rpmh_sm8250},
> + { .compatible = "qcom,sm8350-rpmh-clk", .data = &clk_rpmh_sm8350},
> { }
> };
> MODULE_DEVICE_TABLE(of, clk_rpmh_match_table);
> diff --git a/include/dt-bindings/clock/qcom,rpmh.h b/include/dt-bindings/clock/qcom,rpmh.h
> index 2e6c54e65455..6dbe5d398bf0 100644
> --- a/include/dt-bindings/clock/qcom,rpmh.h
> +++ b/include/dt-bindings/clock/qcom,rpmh.h
> @@ -21,5 +21,13 @@
> #define RPMH_IPA_CLK 12
> #define RPMH_LN_BB_CLK1 13
> #define RPMH_LN_BB_CLK1_A 14
> +#define RPMH_DIV_CLK1 15
> +#define RPMH_DIV_CLK1_A 16
> +#define RPMH_RF_CLK4 17
> +#define RPMH_RF_CLK4_A 18
> +#define RPMH_RF_CLK5 19
> +#define RPMH_RF_CLK5_A 20
> +#define RPMH_PKA_CLK 21
> +#define RPMH_HWKM_CLK 22
>
> #endif
> --
> 2.26.2
>
next prev parent reply other threads:[~2020-12-03 23:56 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-03 7:02 [PATCH 0/5] Add clock drivers for SM8350 Vinod Koul
2020-12-03 7:02 ` [PATCH 1/5] dt-bindings: clock: Add RPMHCC bindings " Vinod Koul
2020-12-03 23:56 ` Bjorn Andersson
2020-12-03 7:02 ` [PATCH 2/5] clk: qcom: rpmh: add support for SM8350 rpmh clocks Vinod Koul
2020-12-03 23:55 ` Bjorn Andersson [this message]
2020-12-03 7:02 ` [PATCH 3/5] dt-bindings: clock: Add SM8350 GCC clock bindings Vinod Koul
2020-12-03 7:02 ` [PATCH 4/5] clk: qcom: clk-alpha-pll: Add support for Lucid 5LPE PLL Vinod Koul
2020-12-03 7:02 ` [PATCH 5/5] clk: qcom: gcc: Add clock driver for SM8350 Vinod Koul
2020-12-04 0:06 ` Bjorn Andersson
2020-12-04 4:35 ` Vinod Koul
2020-12-04 8:50 ` Taniya Das
2020-12-04 10:19 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=X8l7DSGiQ69Tydzc@builder.lan \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=tdas@codeaurora.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).